Keeson Technology WF02D Wi-Fi Control Box User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3826583
Application ID	49NJJvnvpGQTpAq6yWXMuw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	54.44kB (680452 bits)
Date Submitted	2018-04-23 00:00:00
Date Available	2018-04-23 00:00:00
Creation Date	2018-04-12 11:12:51
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-04-23 11:07:44
Document Title	Users Manual
Document Creator	Acrobat PDFMaker 18 Word 版
Document Author:	任宇翔

WF02D User Manual
1. Connect the WiFi box cable to the control box Multifunction interface. Connect
the control box to the 220V through the power supply.
2. Double click reset key, the LED will be on. Long press the back button of the
remote, the LED will be flash. When two LEDs are off, the connection of the
remote and the control box is completed.
3. APP download
APP name: Ergo WiFi
iOS:
https://itunes.apple.com/us/app/ergowifi/id1234525549?l=zh&ls=1&mt=8
android:
https://play.google.com/store/apps/details?id=com.keeson.smartbed&hl=en
4. User register(via email)
Remember the email and password, will be used for logging APP and Alexa
voice control.
5. Press two buttons of foot-up and foot-down on the remote about 5 seconds.
The blue LED will flash, and the buzzer will make a sound of “Bee” every 3
seconds.
6. Open the WiFi settings interface on the phone. Select the WiFi with the name of
“KeesonAp-xxxxxxxx”. Wait for the WiFi connection to complete.
Chhina Mobile
Set
Insecure networks
7. Open the Ergo WiFi APP
. Push the menu button
. Select All the
beds option.
China Mobile
China Mobile
8. On the All the beds interface, push the Connect new bed button to enter the
Connect bed interface.
China Mobile
9. On the Connect bed interface, select the WiFi name that the WiFi box will
connect to. Input WiFi Password, push the Done button to enter the New bed
interface. Wait for the WiFi box connect to the WiFi signal. When the WiFi box
makes sound of “Bee-Bee”, it completes the connection.
China Mobile
China Mobile
10. Open the WiFi settings interface on the phone. Select the WiFi name that the
WiFi box has connected.
China Mobile
Set
11. Return to the APP, on the New bed interface, wait for a moment, the WiFi box
will be found, the ID will be displayed. Click the ID number, then click the Ok on
the Bind notice to complete the connection operation.
China Mobile
China Mobile
12. Return to the APP main interface to control the bed.
FAQ
Now WiFi dongle only support 2.4G WiFi network.
FCC Statement
Any Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This
equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
ISED RSS Warning:
This device complies with Innovation, Science and Economic Development Canada licence‐exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator& your
body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Le rayonnement de la classe b repecte ISED fixaient un environnement non contrôlés.Installation et mise en œuvre de ce
matériel devrait avec échangeur distance minimale entre 20 cm ton corps.Lanceurs ou ne peuvent pas coexister cette
antenne ou capteurs avec d’autres.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : 任宇翔
Comments                        : 
Company                         : Microsoft
Create Date                     : 2018:04:12 11:12:51+08:00
Modify Date                     : 2018:04:23 11:07:44-07:00
Source Modified                 : D:20180412031224
Subject                         : 
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2018:04:23 11:07:44-07:00
Creator Tool                    : Acrobat PDFMaker 18 Word 版
Document ID                     : uuid:278c01fe-41a6-48fa-b9b8-c456bc5892d7
Instance ID                     : uuid:a3289031-b837-44a7-ac5a-5730434afe03
Format                          : application/pdf
Title                           : 
Description                     : 
Creator                         : 任宇翔
Producer                        : Adobe PDF Library 15.0
Keywords                        : 
Page Layout                     : OneColumn
Page Count                      : 7

EXIF Metadata provided by EXIF.tools