Keeson Technology WF02S Wi-Fi Control Box User Manual WF02S

Download:
Mirror Download [FCC.gov]
Document ID	3863127
Application ID	wtu2FS0HBUNdfe/kUrDItw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	85.67kB (1070910 bits)
Date Submitted	2018-05-24 00:00:00
Date Available	2018-05-24 00:00:00
Creation Date	2018-05-15 17:36:53
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2018-05-24 11:17:11
Document Title	Microsoft Word - WF02S user manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	baclsh67

WIFI Control box UserManual
Connect the WiFi box cable to the control box Multifunction interface. Connect
the control box to the 120V through the power supply.
1. APP download
APP name: GoSleeping
You can download the APP from Apple app store and Google Play store.
2. User registration(via email)
Registera new account and login.
3. Press foot-up and foot-down on the remote about 5 seconds. The buzzer will
make a sound of “Bee” every 3 seconds.
4. Open the WiFi settings interface on the phone. Select the WiFi with the name of
“KeesonAp-xxxxxxxx”. Wait for the WiFi connection to complete.
5. Open the GoSleeping,click the right corner button
to connect a base.
6. On theConnect base interface, clickthe Connect new bed button to enter the
Connect new baseinterface.
7. On the Connect new base interface, select the WiFi name that the WiFi box will
connect to. Input WiFi Password, click the Connect button to enter the All bases
interface. Wait for the WiFi box connect to the WiFi signal. When the WiFi box
makes sound of “Bee-Bee”, it completes the connection.
8. Open the WiFi settings interface on the phone. Select the WiFi name that the
WiFi box has connected.
9. Return to the APP, on the All bases interface, wait for a moment, the WiFi box
will be found, the ID will be displayed. Click the Bind button,then select the base
type, click the Confirm button tofinish the connection operation.
10. If the base is a double bed, after binding, select the side and base typeclick the
Confirm button to finish the connection operation.
11. Return to the APP main interface,click the bottom left corner button
control the base.
to
12. Return to the APP main interface, click the central button,then click the Test to
view the real time vital sign data.
FAQ
Now WiFi dongle only support 2.4G WiFi network.
FCC Statement
Any Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This
equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
ISED RSS Warning:
This device complies with Innovation, Science and Economic Development Canada licence‐exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator& your
body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Le rayonnement de la classe b repecte ISED fixaient un environnement non contrôlés.Installation et mise en œuvre de ce
matériel devrait avec échangeur distance minimale entre 20 cm ton corps.Lanceurs ou ne peuvent pas coexister cette
antenne ou capteurs avec d’autres.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : baclsh67
Create Date                     : 2018:05:15 17:36:53+08:00
Modify Date                     : 2018:05:24 11:17:11-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2018:05:24 11:17:11-07:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - WF02S  user manual
Creator                         : baclsh67
Document ID                     : uuid:5c2a669f-f2ef-43fc-81b9-855f0cee212b
Instance ID                     : uuid:c7942926-3d1f-423f-b718-686f992f25e3
Page Count                      : 7

EXIF Metadata provided by EXIF.tools