Kenmore Elite 79551822410 User Manual REFRIGERATOR Manuals And Guides 1408237L

User Manual: Kenmore Elite 79551822410 79551822410 KENMORE ELITE REFRIGERATOR - Manuals and Guides View the owners manual for your KENMORE ELITE REFRIGERATOR #79551822410. Home:Kitchen Appliance Parts:Kenmore Elite Parts:Kenmore Elite REFRIGERATOR Manual

Open the PDF directly: View PDF .
Page Count: 43

Download
Open PDF In Browser	View PDF

Use & Care Guide
Manual

de Uso y Cuidado

English / Espafiol

Models/Moclelos:

795.5182

Kenmore Elite
@

_$_®s

P/N
Sears

MFL63720605
Brands

Hoffman
www.

iL 60179

Corporation
U.S.A.

kenl_ore.¢om

www.sear

Sears

Management

Estates,
s.cot_

Canada

Toronto,

inc.

Ontario,

Canada

www.sears.ca

MSB 2C3

Warranty .............................................................................
3
Protection Agreements
Important

..............................................
4

Safety instructions ................................
5

Electrical & Grounding

Requirements ..............7

Freezer
Ice Storage

Section
Bin ..............................................

Water Filter .....................................................

Care And Cleaning .........................................

Parts and Features .......................................................
8

General

Refrigerator

Outside ...........................................................

Inside Walls ...................................................

Door Liner And Gaskets ...............................

Plastic Parts ....................................................

Condenser Coils .............................................

Installation

.............................. 9-14

Unpacking

Your Refrigerator

.......................... 9

Installation

....................................................................
10

Removing/Replacing
Your Refrigerator and
Freezer Handles and Doors ...........................
11-13
Leveling and Door Alignment
Using Your Refrigerator

...................... 14

..................................

Setting the Controls .......................................

Control

Panel Features ............................................
15

Automatic

Cleaning Tips ................................

LED Light Replacement
Power Interruptions

................................ 28

.......................................

When

You Go On Vacation

When

You Move ............................................

........................ 28
28

Icemaker ...................................... 17
Connecting the Water Line ............................ 29

Food Storage
Refrigerator
Water

Guide

.....................................

Section

Guide ....................................

Kenmore Connect System

and Ice Dispenser ............................. 20

Door Bin and Support ..................................

Snack Pan.......................................................

Crisper Drawer and Cover ............................ 21
Refrigerator/Freezer

Troubleshooting

Shelves ..............................
21

Service

TM.

............................ 40

REFRIGERATOR WARRANTY

I_ llliII Ii

I_(enmore

Elite Limited Warranty

WITH PROOF OF SALE, the following warranty coverage applies
and maintained
according to all supplied instructions. To arrange
(1-800-469-4663)

when this appliance is correctly installed, operated
for warranty service, call: 1-800-4-MY-HOME®

FOR ONE YEAR from the date of sale this appliance is warranted
against defects in material or workmanship.
A
defective appliance will receive free repair or replacement at option of seller. This warranty coverage applies for only
90 days from the sale date in the United States, and is void in Canada, if the appliance is ever used for other than
private household purposes.
FOR FIVE YEARS from the date of sale, the sealed refrigerant
system
in material or workmanship.
New system components will be supplied
responsible for the labor cost of component installation after the first
applies for only one year from the sale date in the United States, and
for other than private household purposes.

of this appliance is warranted against defects
for defective ones free of charge. You are
year from the sale date. This warranty coverage
is void in Canada, if the appliance is ever used

FOR TEN YEARS from the date of sale, the linear compressor of this appliance is warranted
against defects in
material or workmanship.
A new linear compressor will be supplied free of charge. You are responsible for the labor
cost of installation
after the first year from the date of purchase. This warranty coverage applies for only two years
from the sale date in the United States, and is void in Canada, if the appliance is ever used for other than private
household purposes.
This warranty covers ONLY defects in material and workmanship,
and will NOT pay for:
1. Expendable items that can wear out from normal use, including but not limited to filters, belts, screw-in base light
bulbs and bags.
2. A service technician to instruct the user in correct product installation,
operation
or maintenance.
3. A service technician to clean or maintain this product.
4. Damage to or failure of this product if it is not installed, operated or maintained according to all instructions
supplied with the product.
5. Damage to or failure of this product resulting from accident, abuse, misuse or use for other than its intended purpose.
6. Damage to or failure of this product caused by the use of detergents, cleaners, chemicals or utensils other than those
recommended
in all instructions supplied with the product.
7. Damage to or failure of parts or systems resulting from unauthorized
modifications
made to this product.
Disclaimer

of implied

warranties;

limitation

of remedies

Customer's sole and exclusive remedy under this limited warranty shall be product repair or replacement as provided
herein. Implied warranties, including warranties of merchantability
or fitness for a particular
purpose, are limited to one
year or the shortest period allowed by law. Seller shall not be liable for incidental or consequential
damages. Some
states and provinces do not allow the exclusion or limitation of incidental
or consequential
damages, or limitation on the
duration of implied warranties of merchantability
or fitness, so these exclusions or limitations may not apply to you.
This warranty

applies

This warranty

gives you specific

* In-home

repair

only while this appliance

is used in the United States or Canada*.

legal rights, and you may also have other rights which vary from state to state.

service is not available

in all Canadian

travel and transportation
expenses if this product
an authorized servicer is not available.
Sears

Brands

Management

Sears Canada

geographical

is located

Corporation,

Inc., Toronto,

areas, nor will this warranty

in a remote

Ontario,

area (as defined

Hoffman
Canada

Estates,

cover user or servicer

by Sears Canada

IL 60179

MSB 2C3

Inc.) where

Power surge protection against electrical
to power fluctuations.

Master Protection Agreements
Congratulations
on making a smart purchase. Your new
Kenmore Elite ® product is designed and manufactured
for years of dependable operation. But like all products,
it may require preventive maintenance or repair from
time to time. That's when having a Master Protection
Agreement can save you money and aggravation.

damage

due

$250 Food Loss Protection annually for any food
spoilage that is the result of mechanical failure of any
covered refrigerator or freezer.

The Master Protection Agreement also helps extend
the life of your new product. Here's what the
Agreement* includes:
Parts and labor needed to help keep products
operating properly under normal use, not just defects.
Our coverage goes well beyond the product warranty.
No deductibles, no functional failure excluded from
coverage-real protection.

•

Rental reimbursement if repair of your covered
product takes longer than promised.

•

25°/o discount off the regular price of any non-covered
repair service and related installed parts.

Once you purchase the Agreement, a simple phone call
is all that it takes to schedule service. You can call at
any time day or night, or schedule a service appointment
online.
The Master Protection Agreement is a risk free purchase.
If you cancel for any reason during the product warranty
period, we will provide a full refund or a prorated refund
anytime after the product warranty period expires.
Purchase your Master Protection Agreement today!

•

Expert service by a force of more than 10,000
authorized Sears service technicians, which means
someone you can trust will be working on your product.

•

Unlimited service calls and nationwide service, as
often as you want us, whenever you want us.

•

"No-lemon"
guarantee - replacement of your covered
product if four or more product failures occur within
twelve months.

For prices and additional information
U.S.A. call 1-800-827-6655.

•

Product replacement
fixed.

* Coverage in Canada varies on some items. For full
details call Sears Canada at 1-800-361-6665.

•

Annual Preventive Maintenance
- no extra charge.

•

Fast help by phone - we call it Rapid Resolution
- phone support from a Sears representative on all
products. Think of us as a "talking owner's manual."

Some limitations and exclusions apply.

if your covered product can't be

Check at your request

in the

Sears Installation Service
For Sears professional installation of home appliances,
garage door openers, water heaters, and other major
home items, in the U.S.A. or Canada call
1-800-4-MY-HOME
®.

In the space below, record the date of purchase, model and serial number of your product. You will find the model and
serial number printed on an identification
label located on the interior liner of the refrigerator compartment. Have these
items of information available whenever you contact Sears concerning your product.
Model

No.

Date of Purchase

Serial No.
Save these instructions

and attach your sales receipt for future reference.

BASIC SAFETY PRECAUTIONS
This guide contains many important safety messages. Always read and obey all safety messages.
This is the safety alert symbol. It alerts you to safety messages that inform you of hazards that can kill
or hurt you or others, or cause damage to the product.
All safety messages will be preceded by the safety alert symbol and the hazard
signal word DANGER, WARNING
or CAUTION. These words mean:
You will be killed or seriously injured if you do not follow instructions.

You can be killed or seriously injured if you do not follow

instructions.

Indicates an imminently hazardous situation which, if not avoided,
may result in minor or moderate injury, or product damage.
All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can happen
if the instructions are not followed.

To reduce the risk of fire, electric shock, or personal
injury when using your product, basic safety precautions
should be followed, including the following.
Read all instructions before using this appliance.
•

•

DO NOT store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance.

•

DO NOT store explosive substances such as aerosol
cans containing flammable propellants in this
appliance.

NEVER unplug your refrigerator by pulling on the
power cord. Always grip the plug firmly and pull it
straight out from the outlet.

DO NOT allow children to climb, stand, or hang on the
refrigerator doors or shelves in the refrigerator. They
could damage the refrigerator and seriously injure
themselves.

Immediately repair or replace all power cords that
have become frayed or otherwise damaged. Do not
use a cord that shows cracks or abrasion damage
along its length or at either the plug or connector end.
•

•

Do not modify or extend the power cord length. It
could cause electric shock or fire.

Keep fingers out of pinch point areas; clearances
between the doors and cabinets are necessarily small.
Be careful closing doors when children are in the area.

When moving your refrigerator away from the wall, be
careful not to roll over or damage the power cord.

•

The insulation in this unit contains cyclopentane or a
pentane-like gas which is flammable and requires a
special elimination process. Before discontinuing use of
this refrigerator, contact local authorities to arrange for
safe disposal of the unit.

NOTE: It is strongly recommended that any service be
performed by a qualified technician.

Unplug your refrigerator
any repairs.

SAVE THESE INSTRUCTIONS

before cleaning

or making

•

Before service is performed on the interior LED lighting,
unplug the refrigerator or turn off power at the circuit
breaker or fuse box.

DO NOT touch the automatic ice making mechanism
while the refrigerator is plugged in.
DO NOT refreeze frozen foods which have thawed
completely. The United States Department of
Agriculture in Home and Garden Bulletin No. 69 says:

NOTE: The refrigerator and freezer compartment
lights are LED interior lighting, and service should be
performed by a qualified technician.

...You may safely refreeze frozen foods that have
thawed if they still contain ice crystals or if they are
still cold--below
4°C.

WARNING: Setting either or both controls to the OFF
position does not remove power to the light circuit.

...Thawed ground meats, poultry or fish that have any
off-odor or off-color should not be refrozen and should
not be eaten. Thawed ice cream should be discarded.
If the odor or color of any food is poor or questionable,
dispose of it. The food may be dangerous to eat.

When you are finished, reconnect the refrigerator to
the electrical source and reset the controls (Thermostat,
Refrigerator Control, and or Freezer Control, depending
on the model) to the desired setting.
This refrigerator must be properly installed in
accordance with the Attention Installer Instructions

Even partial thawing and refreezing reduces the
eating quality of foods, particularly fruits, vegetables
and prepared foods. The eating quality of red meats
is affected less than that of many other foods. Use
refrozen foods as soon as possible to save as much of
their quality as you can.

that

were taped to the front of the refrigerator.
After your refrigerator is in operation, do not touch the
cold surfaces in the freezer compartment when hands
are damp or wet. Skin may adhere to the extremely cold
surfaces.

WARNING: This product contains chemicals known to
the State of California to cause cancer and birth defects
or other reproductive harm. Wash hands after handling.

SAVE THESE INSTRUCTIONS

This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.

Children should be supervised
play with the appliance.

Junked or abandoned refrigerators are dangerous, even
if they are sitting for only a few days. If you are getting
rid of your old refrigerator, please follow the instructions
at right to help prevent accidents (child entrapment and
suffocation).

to ensure that they do not

YOUR OLD REFRIGERATOR
OR FREEZER:
•

Take off the doors.
Leave YOU
the shelves
place so that
BEFORE
THROWin AWAY
children may not easily climb inside.

Your old refrigerator may have a cooling system
that used CFCs or HCFCs (chlorofluorocarbons
or
hydrochlorofluorocarbons).
CFCs and HCFCs are
believed to harm stratospheric ozone if released to the
atmosphere. Other refrigerants may also cause harm to
the environment if released to the atmosphere.

If you are throwing away your old refrigerator, make
sure the refrigerant is removed for proper disposal
by a qualified technician. If you intentionally release
refrigerant, you may be subject to fines and imprisonment
under provisions of environmental legislation.

IMPORTANT: Please read carefully.
TO CONNECT ELECTRICITY

USE OF EXTENSION

WARNING: Do not use extension cords or ungrounded
(two-prong) adaptors. Because of potential safety
hazards under certain conditions, the use of an extension
cord is not recommended. However, if you still elect to
use an extension cord, it is absolutely necessary that it
be a UL-listed (USA), 3-wire grounding type appliance
extension cord having a grounding type plug and outlet,
and that the electrical rating of the cord be 15 amperes
(minimum) and 120 volts.

Electrical Shock Hazard
FOR PERSONAL SAFETY, this appliance
properly

grounded.

outlet is properly

must be

Have the wall outlet and the circuit

checked by a qualified

electrician

CORDS

to make sure the

Use of an extension cord will increase the clearance
needed for the back of the refrigerator.

grounded.

3-prong
grounding type
wall receptacle
3-prong
grounding

_
t"T"'_

#_
///

RECOMMENDED

I
-__

Do not bend the power cord excessively or place heavy
articles on it.

Ensure proper
ground exists

•

Connect the power plug in the proper position with the
cord hanging down.

•

When moving the refrigerator, be careful not to roll
over or damage the power cord.

•

If the power cord is damaged, have it replaced
immediately
by the manufacturer or its service agent.

•

Do not insert the power plug with wet hands.

•

Do not insert your hands into the area under the
bottom of the appliance.

•

Make sure that the power plug is not squashed or
damaged by the back of the refrigerator.

before use.

GROUNDING

METHOD

The refrigerator
should always be plugged into its own
individual properly grounded electrical outlet rated for 115
Volts, 60 Hz, AC only, and fused at 15 amperes (minimum).
This provides the best performance and also prevents
overloading house wiring circuits which could cause a fire
hazard from overheated wires. It is recommended that a
separate circuit serving only this appliance be provided.

Replacing Electrical Cord

Use a receptacle that cannot be turned off with a switch
or pull chain. Do not use an extension cord.

To avoid hazard, damaged
replaced

Where a standard two-prong wall outlet is encountered,
it is your personal responsibility and obligation to have
it replaced with a properly grounded three-prong wall
outlet.

power cords must be

by the manufacturer

a similarly

qualified

appliance

with a damaged

or its service agent or

technician.

Do not operate

power cord.

the

i
i

I
i
I

i
I

I
I

i
i

i
I

Use this page to become more familiar

with the parts and features of your refrigerator.

NOTE: This guide covers several different models. The refrigerator you have purchased may have some or all of the items
listed below. The locations of the features shown below may not match your model.

Automatic

Icemaker

Freezer Shelves

Q Dairy Bin
O Can Rack

Freezer Light (LED}

Water

Freezer Door Bins

Refrigerator

_) Adjustable

O Base Grille

Shelf

Snack Pan

O Pullout Drawer

Refrigerator

Filter

Door Bins

Fixed Door Bin

Light (LED)

Crisper Drawer

Excessive Weight Hazard:

Excessive Weight Hazard:
Your refrigerator is heavy. When moving the
refrigerator for cleaning or service, be sure to protect
the floor. Always pull the refrigerator
straight out when
moving it. Do not wiggle or walk the refrigerator when
trying to move it, as floor damage could occur.

Use two or more people to move and install the
refrigerator. Failure to do so can result in back or
other injury.

UNPACKING

YOUR REFRIGERATOR

Remove tape and any temporary labels from your
refrigerator before using. Do not remove any warningtype labels, the model and serial number label, or
the Tech Sheet that is located under the front of the
refrigerator,

Explosion Hazard:

behind the base grille.

Keep flammable materials and vapors, such as
gasoline, away from the refrigerator. Failure to do so
can result in fire, explosion, or death.

To remove any remaining tape or glue, rub the area
briskly with your thumb. Tape or glue residue can also be
easily removed by rubbing a small amount of liquid dish
soap over the adhesive with your fingers. Wipe with warm
water and dry.
Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator.
Refrigerator shelves are installed
Please reinstall shelves according
storage needs.

in the shipping position.
to your individual

NOTE:
This appliance is intended to be used in household
similar applications such as:

and

•

staff kitchen areas in shops, offices and other working
environments

•

farm houses and by clients in hotels, motels and other
residential environments

•

bed and breakfast

•

catering

environments

and similar non-retail

applications.

This product is not to be used for special purposes such
as the storage of medicine or test materials, or for use
on ships, etc.

INSTALLATION

To avoid noise and vibration, the unit must be
leveled and installed on a solidly constructed floor, if
required, adjust the leveling legs to compensate for
unevenness of the floor. The front should be slightly
higher than the rear to aid in door closing. Leveling
legs can be turned easily by tipping the cabinet
slightly. Turn the leveling tegs counterclockwise to raise
the unit or clockwise to lower it. (See LEVELING AND
DOOR ALIGNMENT.)

Be careful when you work with the hinge, base grille,
stopper, etc. You may be injured.
To avoid risk of injury or electrical shock, do not put
hands or metal objects into the air vents, base grille, or
bottom opening of the refrigerator.

BASE GRILLE INSTALLATION
To remove

the

base

grllle:

NOTE: Installing
on carpeting,
soft tile surfaces,
a platform
or weakly supported
structure is not
recommended.

1) Open the doors (refrigerator and freezer).
2) Once the doors are open, remove the two screws
from the base grille. Remove the base grille and set
safely aside.

3) Reattach

install this appliance in an area where the temperature
is between 55°F (13°C) and 110°F (43°C). If the
temperature around the appliance is too low or high,
cooling ability may be adversely affected.

Select a place where a water supply can be easily
connected for the automatic icemaken

screws to the base of refrigerator.

To replace the base grllle:

1) Remove

the two screws from the bottom
of refrigerator.

2) Place

base grille

(continued)

front part

into position and insert and

NOTE: The water pressure must be between 20 and
120 psi on models without a water filter and between
40 and 120 psi on models with a water filter.

tighten screws.

Too small of a distance from adjacent items may
result in lowered freezing capability and increased
electricity consumption charges. Allow at least 24
inches (61 cm) in front of the refrigerator to open the
doors.

INSTALLATION

2" (5.08 cm) I

The refrigerator should always be plugged into its own
individual properly grounded electrical outlet rated for 115
Volts, 60 Hz, AC only, and fused at 15 amperes (minimum).
This provides the best performance and also prevents
overloading house wiring circuits which could cause a fire
hazard from overheated wires. It is recommended that a
separate circuit serving only this appliance be provided.

[{
2" (5.08

Shock Hazard:
To reduce the risk of electric shock, do not install the
refrigerator
in a wet or damp area.

cm)_

2" (5.08 crn)_-

2" (5.08 cm)

NOTE: Removing the doors is the recommended procedure when it is necessary to move the refrigerator
narrow opening. If it is necessary to remove the handles, follow the directions below.

HOW TO REMOVE REFRIGERATOR
DOOR HANDLE
NOTE: Handle appearance
illustrations on this page.

through a

Mounting
fasteners _

--.

may vary from the

Set screw

Removing Refrigerator

Handle

Loosen the set screws with a 3/32 in. (2.5 mm)
Allen wrench and remove the handle.
NOTE: If the handle mounting fasteners need
to be tightened or removed, use a 1/4 in. (6.4
mm) Allen wrench.
Allen wrench

HOW TO REPLACE REFRIGERATOR
DOOR HANDLE
NOTE: Handle appearance
illustrations on this page.
Replacing Refrigerator

may vary from the

Mounting
Fasteners

Door Handle

Place the handle on the door by fitting
the handle footprints over the mounting
fasteners and tightening the set screws
with a 3/32 in (2.5 cm) Allen wrench.

NOTE: If the handle mounting fasteners
need to be tightened or removed, use a
1/4in. (6.4 mm) Allen wrench.

REMOVING AND REPLACING
REFRIGERATOR DOORS

Removing the left (freezer)
connection.

door with water line

Pull up the water feed tube while pressing the collet down
(Figure 1) as shown in the figure below.
NOTE: If a tube end is deformed or abraded, trim the
part away. Disconnecting the tube under the door causes
about 0.13 gallons (0.5 liters) of water to flow out. Put a
large container at the end of the tube to prevent water
from draining onto the floor.

Excessive Weight Hazard:
Use two or more people to remove and install the
refrigerator doors. Failure to do so can result in back or
other injury.

Electrical Shock Hazard

Figure 1

Disconnect the electrical supply to the refrigerator
before installing. Failure to do so could result in
serious injury or death.
Do not put hands, feet or other objects into the air
vents, base grille, or bottom of the refrigerator. You
may be injured or receive an electrical shock.
(2)

Before removing the doors, remove the base grille.
See BASE GRILLE INSTALLATION for reference.
To remove the right (refrigerator)

(1)\

door:

(2)

1. Open the door. Remove the top hinge cover screw (1).
Type

2. Use a fiat blade screwdriver to pry back the hooks
(not shown) of the hinge cover from the top of the
refrigerator cabinet (2). Lift up the cover.

(4)" (5)H_
Type

3. Disconnect

all the wire harnesses (3).

1. Open the door. Remove the top hinge cover screw (1).

4. Remove the grounding

screw (4).

2. Use a fiat blade screwdriver to pry back the hooks
(not shown) of the hinge cover from the top of the
refrigerator cabinet (2). Lift up the cover.

5. Rotate hinge lever (5) counterclockwise.
Lift the top
hinge (6) free of the hinge lever latch (7).
NOTE: Regardless of hinge lever type, removal process
is the same.

3. Rotate the hinge lever (3) clockwise. Lift the top hinge
(4) free of the hinge lever latch (5).

_, CAUTION:
When lifting the hinge free of the latch,
be careful that the door does not fall forward.

NOTE: Regardless of the hinge lever type, the removal
process is the same.

6. Lift the door from the lower hinge pin being careful
to pull the water lines through the lower hinge pin.

4. Lift the door from the lower hinge pin.
5. Place the door, inside facing up, on a non-scratching
surface.

7. Place the door, inside facing up, on a non-scratching
surface.

_, CAUTION: When lifting the hinge free of the latch,
be careful that the door does not fall forward.

Reinstalling the right (refrigerator)

door

5. Reconnect the water tubes by inserting the tubes into
the connectors.

(2)

Collet

Insert Line

Type 1
1. Place the door onto the lower hinge pin.
2. Fit top hinge (4) over hinge lever latch (5) into place.
Rotate lever (3) counterclockwise to secure hinge.
NOTE: Regardless
of the hinge lever
reinstallation
process is the same.
.

type,

the

Hook the tab on the switch side of the corner under
the edge of the wire opening in the cabinet top.
Position the cover (2) into place. Insert and tighten
the cover screw (1).

Reinstalling the right (refrigerator)

door

(1)\

(4).

_7)

(7)

Type 1

Rivet"

_J_

T__

Type 2

1. Feed the water tubes through the lower hinge pin and
place the door onto the lower hinge pin.
2. Fit top hinge (6) over hinge lever latch (7) and into
place. Rotate lever (5) clockwise to secure hinge.
NOTE. Regardless of hinge lever type, reinstallation
process is the same.
3. Install the grounding
wire harnesses (3).

screw (4) and connect all the

4. Hook tab on door switch side of cover (2) under
edge of wire opening in cabinet top. Position cover
into place. Insert and tighten cover screw (1).

LEVELING

3. Open both doors again and check to make sure that
they close easily. If the doors do not close easily, tilt
the refrigerator
slightly more to the rear by turning
both leveling legs counterclockwise.
It may take
several more turns, and you should turn both leveling
legs the same amount.

After installing, plug the refrigerator's
power cord into a
3-prong grounded outlet and push the refrigerator
into the
final position.
Your refrigerator
has two front leveling legs--one
on the
right and one on the left. Adjust the legs to alter the tilt
from front-to-back
or side-to-side. If your refrigerator
seems unsteady, or you want the doors to close more
easily, adjust the refrigerator's tilt using the instructions
below:

4. Replace the base grille.

DOOR ALIGNMENT
if the doors are still uneven after the refrigerator
has
been leveled, finish adjusting the doors by following the
instructions below.

NOTE: Tools Required: 3/4" (19mm) & 8/1_"(8mm) wrench
or fiat blade screwdriver.
1. Remove the base grille (refer to page 10).

Adjusting tools: 5/16" (Smm) wrench
wrench

2. Turn the leveling leg counterclockwise
to raise that side
of the refrigerator or clockwise to lower it. It may take
several turns of the leveling leg to adjust the tilt of the
refrigerator.

/_
f

Height

and 3/4"

(19ram)

difference
Keeper

nut

i Wrench
'_%÷_,

ill ;

\
Left leveling
leg

Height
difference

Adj_p

Height
difference

hinge pln

Down _

_'x

Using a 3/4" (19mm) wrench, turn the keeper nut
clockwise to loosen the keeper nut.
NOTE: Having someone push backward against the top of
the refrigerator takes some weight off of the leveling legs.
This makes it easier to adjust the legs.

Using a 5/16" (8mm) wrench, turn the adjustment hinge
pin clockwise or counterclockwise to level the refrigerator
and freezer door.
After leveling the door, turn the keeper nut
counterclockwise
to tighten. Make sure the front leveling
legs are complete.

Right

leveling

CAUTION: Do not overtighten the door adjustment screw.
The hinge pin can be pulled out. (The adjustable range of
height is a maximum of 1/2" (1.27 cm).)

leg

Height
difference

SETTING THE CONTROLS

CONTROL

PANEL FEATURES

The refrigerator control functions as the thermostat for the
entire appliance (refrigerator and freezer sections). The
colder the setting, the longer the compressor will run to
keep the temperature colder. The freezer control adjusts
the cold air flow from the freezer to the refrigerator.
Setting the freezer control to a lower temperature keeps
more cold air in the freezer compartment to make it
colder.
AIRFLOW
Cold air circulates from the freezer to the fresh food
section and back again through air vents in the wall
dividing the two sections. Be sure not to block vents while
packing your refrigerator. Doing so will restrict airflow
and may cause the refrigerator temperature to become
too warm or cause interior moisture buildup. (See air flow
diagram below.)

Temperalure
The Refrigerator Temp Control ranges from 30°F to
46°F (]°C to 8°C). Press the Refrigerator Temp button
to cycle through the available temperature settings one
increment at a time. The recommended temperature for
the refrigerator compartment is 37°F (3°C).
The Freezer Temp Control range is from -6°F to 8°F
(=21°C to -13°C). Press the Freezer Temp button to
cycle through the available temperature settings one
increment at a time. The recommended temperature for
the freezer compartment is 0°F (-18°C).
NOTE: When changing control settings, wait 24 hours
before making additional adjustments. The controls are set
correctly when milk or juice is as cold as you would like
and when ice cream is firm. If the temperature in either
compartment is too cold or too warm, change the setting
one increment at a time. Wait 24 hours for the change to
stabilize before adjusting again.
Temperature Mode Switch Function (°F <->°C)
if you want to convert °F to °C or vice versa, press and
hold the Freezer Temp. and Refrigerator Temp. buttons at
the same time for approximately
five seconds.
Ice & Water

iMPORTANT;

Dispenser

Select Water, Crushed ice or Cubed ice by pressing the
ICE & WATER button to the selection desired. The Water,
Crushed Ice or Cubed Ice icon will light up to indicate the
selection.

Because air circulates between both sections, any odors
formed in one section will transfer to the other. You must
thoroughly clean both sections to eliminate odors.
To prevent odor transfer and dried out food, wrap or
cover foods tightly. (See the Food Storage Guide section
for details.)

Selecting this icon indicates that cubed ice
will be dispensed when the dispenser pad is
activated.

NOTE: If you close the refrigerator door, you may see the
freezer door open and close again due to pressure from
internal air flow.

Selecting this icon indicates that water will be
dispensed when the dispenser pad is activated.

PRIOR TO USE
1. Clean your refrigerator thoroughly
accumulated during shipping.

Selecting this icon indicates that crushed ice
will be dispensed when the dispenser pad is
activated.

and wipe off dust

2. install accessories such as ice cube bin, drawers,
shelves, etc., in their proper places. They are packed
together to prevent possible damage during shipment.
3. Let your refrigerator run for at least 2 or 3 hours
before putting food in it. Check the flow of cold air
in the freezer compartment to ensure proper cooling.
Your refrigerator
is now ready for use.

To dispense water or ice, gently push your cup against
the dispenser pad.
NOTE: Hold your cup in place for a couple of seconds
after dispensing ice or water so the last few drops go in
your cup instead of on the floor.

Ultra Ice

Demo Mode (For Store Use Only)

When you touch the Ultra Ice button, the Ultra Ice icon
on the display panel will illuminate and will continue
for 24 hours. The function will automatically
shut off:
after 24 hours.
You can stop this function
button one more time.

manually

by touching

CAUTION

The Demo Mode
refrigerator and
while on display
OFF will display

the

To deactivate:

This function increases both ice making and freezing
capabilities by running the freezer compartment
at the
coldest setting for a 24-hour period.

With either refrigerator door opened, press and
hold the Refrigerator Temp. and Ultra Ice buttons
at the same time for five seconds. The control panel
will beep and the temperature settings will display
to confirm that Demo Mode is deactivated.
Use the
same procedure to activate the Demo Mode.

Water Filter Reset
When the water filter indicator turns on, you need
to change the water filter. After changing the water
filter, press and hold the Filter Reset button for three
seconds to turn the indicator light off:. You need
to change the water filter approximately
every six
months.

Adjusting Control Settings
Give the refrigerator time to cool down completely
before making final adjustments. It is best to wait 24
hours to let the normal settings recommended above
stabilize before making any changes. If you need to
adjust the temperature in the refrigerator or freezer,
start by adjusting the refrigerator temperature and
allow 24 hours for the temperature to stabilize again.
If it is still too warm or too cold, then adjust the
freezer control.

Door Alarm
When power is connected to the refrigerator, the door
alarm is initially set to ON. When you press the Door
Alarm button, the display will change to OFF and the
Door Alarm function will deactivate.

Use the settings listed in the chart below as a guide.
Always remember to wait at least 24 hours between
adjustments.

When either the refrigerator
or the freezer door is left
open for more than 60 seconds, the alarm tone will
sound to let you know that the door is open.

REFRIGERATOR section too
warm.
• Door opened often.
• Large amount of food
added.

Control Lock
When power is initially connected
the Lock function is off:.

I_-CO/_¢ENI_D ADJUSTMi:I_I"

CONDITION/REASON

When you close the door, the door alarm will stop.

to the refrigerator,

•

Room

temperature

•

very warm.

FREEZER section too warm/ice
not made fast enough.
• Door opened often.
• Large amount of food added.
• Very cold (55°F (13°C)) room
temperature. (Compressor
does not cycle often enough.)
• Heavy ice usage.
• Air vents blocked by items.

If you want to activate the Lock function to lock other
buttons, press and hold the Door Alarm button for
three seconds or more. The Control Lock indicator will
turn on and the Lock function is now enabled.
When the Lock function is activated, no other buttons
will work. The dispenser pad is also deactivated.
To disable the Lock function, press and hold the Door
Alarm button for approximately three seconds.

Ambient Mood Light/Dispenser

disables all cooling in the
freezer sections to conserve energy
in a retail store. When activated,
on the control panel.

REFRIGERATOR
cold.

Light

•

A white light illuminates the dispenser area whenever
the dispenser pad is engaged. The dispenser area
can also be illuminated by a mood light, which is
activated by pressing the Light button. When the
Mood Light is activated, the indicator light above the
Light button turns on.

section too

Controls not set correctly
your conditions.

FREEZER section too cold.
• Controls not set correctly
your conditions.

Set the FREEZER control
one degree colder;
wait 24 hours for the
new setting to take full
efl:ect before making
another adjustment.

•

Move items out of air
stream.

•

Set the REFRIGERATOR
control one degree
warmer; wait 24 hours for
the new setting to take
full efl:ect before making
another adjustment.

for

•
for

Set the REFRIGERATOR
control one degree
colder; wait 24 hours for
the new setting to take
full efl:ect before making
another adjustment.

Set the FREEZER control
one degree warmer;
wait 24 hours for the
new setting to take full
efl:ect before making
another adjustment.

AUTOMATIC

ICEMAKER

Ice is made in the automatic icemaker and sent to the
dispenser. The icemaker will produce 6 cubes per cycle approximately
110 cubes in a 24-hour period, depending
on freezer compartment temperature, room temperature,
number of door openings and other operating conditions.

Personal Injury Hazard
DO NOT place fingers or hands on the automatic ice
making mechanism while the refrigerator
is plugged in.

It takes about 12 to 24 hours for a newly installed
refrigerator to begin making ice. Wait 72 hours for full
ice production to occur.

Indicator

Light

Ice making stops when the in-door ice bin is full. When
full, the in-door ice bin holds approximately
6 to 8 (1216 oz) glasses of ice.
To turn off: the automatic icemaker, set the icemaker
switch to OFF (O). To turn on the automatic icemaker,
set the switch to ON (I).
The water pressure must be between 20 and
120 psi (138 to 827 kPa) on models without a water
filter and between 40 and 120 psi (276 to 827 kPa)
on models with a water filter to produce the normal
amount and size of ice cubes.

\
Shutoff
Ice Cube size
selector button

The ice cube size selector button is used to compensate
for high or low water pressure. If you have low water
pressure coming to your refrigerator, you may need
to select the highest setting. For high water pressure,
select a lower setting.

_,WARNING:

WHEN YOU SHOULD SET THE ICEMAKER
POWER SWITCH TO OFF (O)

Connect to a potable

Switch

water supply only.

PREPARING FOR VACATION
Set the icemaker power switch to OFF (O) and shut off:
the water supply to the refrigerator.

•

When the water supply will be shut off: for several
hours.

•

When the ice bin is removed for more than one or two
minutes.

•

When the refrigerator

NOTE: The ice bin should be emptied anytime the
icemaker ON/OFF switch is turned to the OFF (O)
position.
If the ambient temperature will drop below freezing, have
a qualified technician drain the water supply system to
prevent serious property damage due to flooding caused
by ruptured water lines or connections.

will not be used for several days.

NOTE: The ice bin should be emptied when the
icemaker ON/OFF switch is turned to the OFF (O)
position.

NORMAL SOUNDS YOU MAY HEAR
The icemaker water valve will buzz as the icemaker

Power

Arm

fills

with water. If the power switch is in the ON (I) position,
it will buzz even if it has not yet been hooked up to
water. To stop the buzzing, move the power switch to
OFF (O).
NOTE: Keeping the power switch in the ON (I) position
before the water line is connected can damage the
icemaker.
You will hear the sound of cubes dropping into the bin
and water running in the pipes as the icemaker refills.

AUTOMATIC

ICEMAI(ER (continued)

_LCAUTION
•

The first ice and water dispensed may include particles
or odor from the water supply line or the water tank.

•

Throw away the first few batches of ice (about 24
cubes). This is also necessary if the refrigerator
has not
been used for a long time.

•

Dispense ice into a glass before filling it with water
or other beverages. Splashing may occur if ice is
dispensed into a glass that already contains liquid.
Never use a glass that is exceptionally
narrow or
deep. Ice may jam in the ice passage and refrigerator
performance may be affected.

Never store beverage cans or other items in the ice
bin for the purpose of rapid cooling. Doing so may
damage the icemaker or the containers may burst.

Keep the glass at a proper distance from the ice outlet.
A glass held too close to the outlet may prevent ice
from dispensing.

If discolored ice is dispensed, check the water filter
and water supply. If the problem continues, contact a
Sears or other qualified service center. Do not use the
ice or water until the problem is corrected.

To avoid personal injury, keep hands out of the ice
door and passage.
Never remove the dispenser cover.

•

Keep children away from the dispenser. Children
play with or damage the controls.

may
If ice or water dispenses unexpectedly, turn off the
water supply and contact Sears Home Service at
1-800-4-MY HOME*.

The ice passage may become blocked with frost if only
crushed ice is used. Remove the frost that accumulates
by removing the ice bin and clearing the passage with
a rubber spatula. Dispensing cubed ice can also help
prevent frost buildup.
•

Never use thin crystal glass or crockery to collect ice.
Such containers may chip or break resulting in glass
fragments in the ice.

FOOD STORAGE GUIDE
Wrap or store food in the refrigerator in airtight and
moisture-proof
material unless otherwise noted. This
prevents food odor and taste transfer throughout the
refrigerator. For dated products, check date code to
ensure freshness.

Items
Butter or
margarine

Milk

I_ Wipe milk cartons. For best
storage, place milk on interior
shelf, not in the door bin.
I_ Store in original carton on interior
shelf, not in door bin.

Fruit

I_ Wash, let dry, and store in
refrigerator
in plastic bags or in
the crisper. Do not wash or hull
fruit until you are ready to use
them. Sort and keep fruit in its
original container, in a crisper, or
store in a completely closed paper
bag on a refrigerator shelf.

Fish
Leftovers

Storage times will vary according to the quality and
type of food, the type of packaging or wrap used
(how airtight and moisture-proof)
and the storage
temperature. Ice crystals inside a sealed package are
normal. This simply means that moisture in the food
and air inside the package have condensed, creating
ice crystals.

wrapping
until you are ready to use it. Once
opened, rewrap tightly in plastic
wrap or aluminum foil.

Eggs

Vegetables
with skins
(carrots,
peppers)

Freezing
Your freezer will not quick-freeze a large quantity of
food. Do not put more unfrozen food into the freezer
than will freeze within 24 hours (no more than 2 to 3
Ibs. of food per cubic foot of freezer space). Leave
enough space in the freezer for air to circulate around
packages. Be careful to leave enough room at the
front so the door can close tightly.

Keep opened butter in a covered
dish or closed compartment.
When storing an extra supply,
wrap in freezer packaging and
freeze.
I_ Store in the original

Leafy

NOTE: Check a freezer guide or a reliable cookbook
for further information about preparing food for
freezing or food storage times.

How to

Cheese

vegetables

STORING FROZEN FOOD

NOTE: Allow hot foods to cool at room temperature
for 30 minutes, then package and freeze. Cooling hot
foods before freezing saves energy.
Packaging
Successful freezing depends on correct packaging.
When you close and seal the package, it must not
allow air or moisture in or out. If it does, you could
have food odor and taste transfer throughout the
refrigerator and could also dry out frozen food.
Packaging recommendations:
• Rigid plastic containers with tight-fitting
lids
• Straight-sided
canning/freezing
jars
• Heavy-duty aluminum foil
• Plastic-coated paper
• Non-permeable
plastic wraps
• Specified freezer-grade
self-sealing plastic bags
Follow package or container instructions for proper
freezing methods.

Remove store wrapping and trim
or tear off bruised and discolored
areas. Wash in cold water and
drain. Place in plastic bag or
plastic container and store in
crisper.

Do nat use
• Bread wrappers
• Non-polyethylene
plastic containers
• Containers without tight lids
• Wax paper or wax-coated
freezer wrap
• Thin, semi-permeable
wrap

Place in plastic bags or plastic
container and store in crisper.

I_ Use fresh fish and shellfish the
same day purchased.

_, CAUTION: Do not keep beverage cans or plastic
food containers in the freezer compartment. They may
break or burst if they freeze.

I_ Cover leftovers with plastic wrap,
aluminum foil, or plastic containers
with tight lids.

REFRIGERATOR

SECTION

WATER AND iCE DISPENSER

DOOR BIN AND SUPPORT

To dispense cold water, push on the dispenser switch
with a glass.

Your refrigerator and freezer feature bins which can
easily be arranged for packaged products.
Holding

both sides, lift the door bin 0 and pull it out (_).

SNACK PAN
To remove the snack pan cover, slightly pull out the
snack pan O. Lift the front part of the snack pan cover
and pull out (_).

Some dripping may occur after dispensing. Hold your
cup beneath the dispenser for a few seconds after
dispensing to catch all of the drops.

@
,_, WARNING: Do not put your
Fingers up the ice chute opening.
Doing so can result in severe injury.
A, CAUTION: Do not dispense ice
intofine china or crystal glasses.
China or crystal can break.

NOTE: The dispenser is equipped with a light that
turns on when the dispenser pad is engaged.

CRISPER DRAWER AND COVER

REFRIGERATOR/FREEZER SHELVES

The crisper drawer allows for better conservation of
fruits and vegetables.

IMPORTANT: Do not clean glass shelves with warm
water while they are cold. Shelves may break if exposed
to sudden temperature changes or impact.

To remove the crisper drawer cover, open the crisper
drawer several inches O, lift the front part of the cover
@ and slide the cover out (_).

NOTE: Glass shelves are heavy. Use special care when
removing them.
Shelves

To remove a shelf--Lift from both front and rearC) ,
then pull the shelf toward youC).

To remove the crisper drawer, open the crisper drawer (i)
until it stops. Then, slightly lift the crisper drawer (_) while
pulling it out (_).
CAUTION: Do not apply too much force when pulling
out the shelf. If the shelf hits the door, it may result in
damage or personal injury.

%
A CAUTION: You will see the water tank while
removing the crisper drawer. Do not remove the water
tank or water leakage may occur. The water tank is
not a removable part.

Tilt the shelf (_) and pull forward

to remove it (_.

FREEZER SECTION
ICE STORAGE BIN
The ice bin stores the ice cubes made by the icemaker.
If you need to remove the ice storage bin, do so as
follows:
NOTE: Use both hands to remove the ice bin to avoid
dropping it,
Lift the ice storage bin slightly (_) and pull it out C_)as
shown in the figure,

WATER FILTER
It is recommended

that you replace the water filter:

•

Approximately

every 6 months.

•

When the water filter indicator

•

When the water dispenser output decreases.

•

When the ice cubes are smaller than normal.

turns on.

1. Remove the old water filter.

Rotate the water
filter up into
position and
close the cover.
The cover will
click when closed
correctly.

Press the push button to open the
water filter coven
NOTE: Replacing the water filter
causes a small amount of water
(around 1 oz. or 25 cc) to drain. Place
a cup under the front end of the water filter cover to
collect any leaking water. Hold the water filter upright,
once it is removed, to prevent any remaining water from
spilling out of the water filter.

3. After the water filter is replaced, dispense 2.5
gallons of water (flush for approximately
5 minutes)
to remove trapped air and contaminants from
the system. Do not dispense the entire 2.5 gallon
amount continuously. Depress and release the
dispenser pad for cycles of 30 seconds ON and 60
seconds OFF.

Pull the water
filter downward
and pull out.
Make sure to
rotate the filter
down completely
before pulling
it out of the
manifold hole.

NOTE: To purchase a replacement water filter, visit a
Sears store or call 1-800-4-MY-HOME
®. You may also
order on-line at www.sears.com/partsdirect

2. Replace with a new water filter.
Take the new water filter out of its packing
the protective
cover from the
o-rings. With the
water filter tabs
in the horizontal
position, push the
new water filter
into the manifold
.)
hole until it stops.

and remove

Performance Data Sheet
Use Replacement

Cartridge:

ADQ73613402

The concentration of the indicated substances in water entering the system was reduced to a concentration
less than or
equal to the permissible limit for water leaving the system as specified in NSF/ANSI Standard 42 and Standard 53.

System tested and certified by NSF International
reduction of substances listed below.

against

NSF/ANSI

Standard

Average
Contaminant

Reduction

CHorine Taste and Odor
Nominal Particulate Oass I,,

Average

NSF

specified

Challenge

Influent

Concentration

2.0 mg/L

2.0 mg/L _+ 10%

Avg

Reduction
97.5%

Product

Water

Concentration
0.05 mg/L

Max Permissible
Product

53 for the

NSF Reduction

Water

Concentration

Requirements

N/A

_>50%

N/A

_>85%

N/A

_>99%

0.003 mg/L

N/A

0.005 mg/L

N/A

0.04 mg/L

N/A

5,600,000
At least 10,000 partides/mL

_>0.5 to < 1.0 pm

42 and Standard

99.3%

73,000

pts/ml

pts/mL
107 to 108 MFL; fibers greater

Asbestos

170 MFL

>99%

< 1 MFL

than 10 pm in length
Atrazine

0.0087

mg/L

0.009 mg/L _+10%

94.2%

0.00005

97%

0.0005

mg/L

Benzene

0.017 mg/L

0.015 mg/L _+10%

Carbofuran

0.073 mg/L

0.08 mg/L

Lindane

0.002 mg/L

0.002 mg/L _+10%

98.8%

P-DicWorobenzene

0.263 mg/L

0.225 mg/L _+ 10%

99.6%

0.001 mg/L

0.075 mg/L

N/A

Toxaphene

0.014 mg/L

0.015 mg/L _+10%

93.5%

0.001 mg/L

0.003 mg/L

N/A

0.25 mg/L

0.210 mg/L _+10%

99.5%

0.0012 mg/L

0.07 mg/L

N/A

0.001 mg/L

0.010 mg/L

N/A

2,4-D
Lead pH _6.5

0.150 mg/L

Lead pH 68.5

0.150 mg/L

M .....

y @ pH 6.5

0.006 mg/L

M .....

y @ pH 8.5

Cyst _"

0.0062

mg/L

120,000 cysts/L

Based on the use of Cryptosporidium

_+10%

98.8%

0.15 mg/L

_+10%

>99.3%

0.15 mg/L

_+10%

>99.3%

0.006 mg/L _+10%
0.006 mg/L _+10%
Minimum

50,000

cysts/L

0.00002

mg/L

0.001 mg/L

0.0002

mg/L

N/A

0.010 mg/L

N/A

96.5

0.0002

mg/L

0.002 mg/L

N/A

86.9

0.0081 mg/L

0.002 mg/L

N/A

<1 cyst/L

N/A

_>99.95%

>99.99%

parvum oocysts

mg/L

0.001 mg/L

Application

Guidelines/Water

Supply Parameters

Service Flow

0.5 gpm (1.9 Ipm)

Water Supply

Potable Water

Water Pressure

20-120 psi (138 - 827 kPa)

Water Temperature

33°F - 100°F (0.6°C - 38°C)

Capacity

200 gallons (757 liters)

To reduce the risk associated with choking: Do not
allow children under 3 years of age to have access to
small parts during the installation of this product.
To reduce the risk associated with ingestion
of contaminants: Do not use with water that is
microbiologically
unsafe or of unknown quality without
adequate disinfection before and after the system.
Systems certified for cyst reduction may be used on
disinfected water that may contain filterable cysts. EPA
Establishment Number 070595-MEX-O01

California Department of Public Health Certification
14-3015.
For conditions of use, health claims certified by California
Department of Public Health and replacement parts, see
Performance Data Sheet.

It is essential that the manufacturer's recommended
installation, maintenance and water filter replacement
requirements be carried out for the product to perform
advertised.

NOTE: While the testing was performed under standard
laboratory conditions, actual performance may vary.
Replacement Cartridge:

To reduce the risk associated with property damage
due to water leakage:

ADQ73613402

To purchase a replacement filter, visit your local Sears
store or call 1-800-4-MY-HOME
®. Visit us on the web at
www.sears.com

Read and follow the Water

Product distributed in the United States by Sears Brands
Management Corporation, Haft:man Estates, I L 60179.

Installation and use MUST
local plumbing codes.

3M is a trademark
NSF is a trademark

Do nat install if water pressure exceeds 120 psi (827
kPa). Contact a plumbing professional if you are
uncertain of how to check your water pressure.

installation

of 3M Company.
of NSF International.

3M Company.

Filter instructions

before

and use of this system.
comply with all state and

Do not install where water hammer conditions may
occur. If water hammer conditions exist, you must
install a water hammer arrester. Contact a plumbing
professional if you are uncertain of how to check for
this condition.
•

•

Do nat install on hot water supply lines.
The maximum operating water temperature
water filter system is 100°F (38°C).

of this

Protect water filter from freezing. Do not operate
refrigerator in ambient conditions below 55°F. Drain
water filter when storing unit in temperatures
40°F (4.4°C).

below

The disposable water filter must be replaced every
six months, at the rated capacity, or if a noticeable
reduction in fiow rate occurs.
Do not install systems in areas where ambient
temperatures

may go above 110°F (43.3°C).

Where a backflow prevention device is installed on
a water system, a device for controlling pressure due
to thermal expansion must be installed.
Ensure all tubing and fittings are secure and free
from leaks.

State of California
Department

of Public Health

Water Treatment Device
Certificate Number
09- 2019
Date Issued:

Manufacturer:
The water
116830

Sears Roebuck

treatment

December

!5, 2009

and:Co.

rant to Section

d_
ii

,,for the

Microbiolo

and Turbidity

Cysts

Organic Contaminants
2,4-D Redu_ti'on
Atrazine
Benzene

.....
/

Carbofuran

,!!!iiiiii_
'_'!i_'_
, _

Lindane
p-Dichlorobenzene

Toxaphene

Ratea

Service Capacity:

200 gal

:_;

Rat_Servil

Flowi

0.5 gpm

INSIDE WALLS (allow freezer to warm up so
the cloth will not stick)
To help remove odors, you can wash the inside of the
refrigerator with a mixture of baking soda and warm
water. Mix 2 tablespoons of baking soda to 1 quart of
water (26 g soda to 1 liter water.) Be sure the baking soda
is completely dissolved so it does not scratch the surfaces
of the refrigerator.

Explosion Hazard

_CAUTION:
water.

Use non-flammable
cleaner. Failure to do so can result
in fire, explosion, or death.

While cleaning

the inside, do not spray

DOOR LINERS AND GASKETS
Use a clean sponge or soft cloth and a mild detergent
in warm water. Do not use cleaning waxes, concentrated
detergents, bleaches, or cleaners containing petroleum on
plastic refrigerator
parts.

Both the refrigerator and freezer sections defrost
automatically;
however, clean both sections about once a
month to prevent odors. Wipe up spills immediately.
GENERAL CLEANING
•
•

•
•
•

TIPS
PLASTIC PARTS (Covers and Panels)

Unplug refrigerator
or disconnect power.
Remove all removable parts, such as shelves, crispers,
etc. Refer to sections in Using Your Refrigerator for
removal instructions.
Use a clean sponge or soft cloth and a mild detergent
in warm water. Do not use abrasive or harsh cleaners.
Hand wash, rinse and dry all surfaces thoroughly.
Plug in refrigerator or reconnect power.

Use a clean sponge or soft cloth and a mild detergent
in warm water. Do not use window sprays, abrasive
cleansers, or flammable fluids. These can scratch or
damage the material.

CONDENSER COILS
Use a vacuum cleaner with
an attachment to clean the
condenser cover and vents.
Do not remove the panel
covering the condenser
coil area.

OUTSIDE
Waxing external painted metal surfaces helps provide
rust protection. Do not wax plastic parts. Wax painted
metal surfaces at least twice a year using appliance wax
(or auto paste wax). Apply wax with a clean, soft cloth.
For products with a stainless steel exterior, use a clean
sponge or soft cloth and a mild detergent in warm water.
Do not use abrasive or harsh cleaners. Dry thoroughly
with a soft cloth.

WHEN YOU MOVE

LED LIGHT REPLACEMENT

When you are moving your refrigerator to a new home,
follow these steps to prepare it for the move.

Electrical Shock Hazard

1. Remove all food from the refrigerator
frozen food in dry ice.

Before service is performed on the interior LED lighting,
unplug the refrigerator or turn off power at the circuit
breaker or fuse box.

2. Unplug the refrigerator.
3. Clean, wipe and dry thoroughly.

Setting either or both controls to the OFF position does
not remove power to the light circuit.

4. Take out all removable parts, wrap
and tape them together so they do
rattle during the move. Refer to the
REFRIGERATOR section for removal

NOTE: The refrigerator and freezer compartment lights
are LED interior lighting, and service should be performed
by a qualified technician.

POWER INTERRUPTIONS
1. If the power will be out for 24 hours or less, keep all
refrigerator doors closed to help foods stay cold and
frozen.

Depending on the model, raise the front of the
refrigerator so it rolls more easily OR screw in the
leveling legs all the way so they do not scrape the
floor. See the DOOR ALIGNMENT section.

When you get to your new home, put everything back and
refer to the REFRIGERATOR INSTALLATION section for
preparation

WHEN YOU GO ON VACATION
If you choose to leave the refrigerator on while you are
away, follow these steps to prepare your refrigerator
before you leave.

2. Turn off the icemaker

and freeze other items.
and empty the ice bin.

If you choose to turn the refrigerator off before you leave,
follow these steps.
1. Remove all food from the refrigerator.
2. Depending on your model, set the thermostat control
(refrigerator
control) to OFF. See the SETTING THE
CONTROLS section.
3. Clean the refrigerator,

them well
not shift and
USING YOUR
instructions.

6. Tape the doors shut and tape the power cord to the
refrigerator cabinet.

2. If the power will be out for more than 24 hours, remove
all frozen food and store it in a frozen food locker.

1. Use up any perishables

and pack all

wipe it and dry well.

4. Tape rubber or wood blocks to the tops of both doors
to prop them open far enough for air to get in. This
stops odor and mold from building up.

instructions.

BEFORE YOU BEGIN

WHAT YOU WILL NEED

This water line installation is not covered by the refrigerator
warranty. Follow these instructions carefully to minimize the
risk of expensive water damage.

•

Copper Tubing, 1/4 in. outer
diameter, to connect the refrigerator
to the water supply. Be sure both
ends of the tubing are cut square.

•

To determine how much tubing you
need: measure the distance from the water valve on the

Water hammer (water banging in the pipes) in house
plumbing can cause damage to refrigerator parts and can
lead to water leakage or flooding. Call a qualified plumber
to correct water hammer before installing the water supply
line to the refrigerator.

back of the refrigerator to the water supply pipe. Then,
add 8 feet (2.4 m). Be sure there is sufficient extra tubing
(about 8 feet [2.4 m] coiled into 3 turns of about 10 in.
[25 cm] diameter) to allow the refrigerator to move out
from the wall after installation.

CAUTION: To prevent burns and product damage, only
connect the refrigerator water line to a cold water supply.
Connect to a potable water supply only.

•

If you use your refrigerator before connecting the water
line, make sure the icemaker power switch is in the OFF (O)
position.

1½in. or adjustable wrench.
Flat blade and Phillips head screwdrivers.
Two ¼ in. outer diameter

Do not install the icemaker tubing in areas where
temperatures fall below freezing.

compression nuts and
2 ferrules (sleeves) to
connect the copper tubing
to the shutoff valve and the

WATER PRESSURE
Connect to a cold water supply. The water pressuremust
be between 20 and 120 psi(138to 827 kPa) on models
withouta water filter
and between 40 and 120 psi(276 to
827 kPa) on models with a water filter.

refrigerator

If a reverse osmosis water filtration system is connected
to your cold water supply, the water pressure to the reverse
osmosis system needs to be a minimum of 40 to 60 psi (2.8
kgf/cm 2 - 4.2 kgf/cm 2, less than 2.0-3.0 sec. to fill a cup
of 7 oz capacity).

Shutoff valve to connect
to the cold water line. The
shutoff valve should have a water inlet with a minimum
inside diameter of 5/32 in. at the point of connection
to the COLD WATER LINE.
_
_--_-_
Saddle-type shutoff valves

If the water pressure from the reverse osmosis system is less
than 21 psi or 1.5 kgf/cm2 (takes more than 4.0 sec to fill a
cup of 7 oz capacity):
system is blocked.

Replace the filter if necessary.

Allow the storage tank on the reverse osmosis system to
refill after heavy usage.

•

If the issue concerning water pressure from reverse
osmosis remains, call a licensed, qualified plumber.
All installations must be in accordance with local

•

are included in many water
_
I_
supply kits. Before purchasing, __("_
make sure a saddle-type
_k,,,,_--_<,_l_,p_kL_J
valve complies with your local
._ v
plumbing codes.

Check to see if the sediment filter in the reverse osmosis

•

plumbing

water valve.

If your existing copper water
line has a flared fitting at the
end, you will need an adapter
(available at plumbing supply
stores) to connect the water line
to the refrigerator OR you can
cut off the flared fitting with
a tube cutter and then use a
compression fitting.

If a reverse osmosis water filtration system is connected
to your cold water supply, this water line installation is not
covered by the refrigerator warranty. Follow the following
instructions carefully to minimize the risk of expensive water
damage.

•

Power drill.

NOTE: A Self Piercing Saddle Type Water Valve should
not be used.

code requirements.

CAUTION: Wear eye protection
prevent injury.

during installation

Electrical Shock Hazard

When using any electrical device (such as a power
drill) during installation, be sure the device is battery
powered, double insulated or grounded in a manner that
will prevent the hazard of electric shock.

INSTALLATION

5. TIGHTEN THE PIPE CLAMP

INSTRUCTIONS

Install the shutoff valve on the nearest frequently
drinking water line.

Tighten the clamp screws until the sealing washer
begins to swell.

used

NOTE: Do not overtighten
tubing.

1. SHUT OFF THE MAIN WATER SUPPLY
Turn on the nearest faucet to relieve the pressure on the
line.

clamp or you may crush the
Washer
Inlet End

2. CHOOSE THE VALVE LOCATION
Choose a location for the valve that is
easily accessible. It is best to connect
into the side of a vertical water pipe.
When it is necessary to connect into
a horizontal water pipe, make the
connection to the top or side, rather
than at the bottom, to avoid drawing
off any sediment from the water pipe.

Pipe Clamp

Clamp Screw_

3. DRILL THE HOLE FOR THE VALVE
Drill a 1/4 in. hole in the water pipe using a sharp bit.
Remove any burrs resulting from
drilling the hole in the pipe. Be
careful not to allow water to
drain into the drill. Failure to
drill a 1/4 in. hole may result
in reduced ice production or
smaller cubes.

ROUTE THE TUBING
Route the tubing between the cold water line and the
refrigerator.
Route the tubing through a hole drilled in the wall or
floor (behind the refrigerator or adjacent base cabinet)
as close to the wall as possible.
NOTE: Be sure there is sufficient extra tubing (about
8 feet coiled into 3 turns of about 10 in. diameter) to
allow the refrigerator to move out from the wall after
installation.

7. CONNECT THE TUBING TO THE VALVE
NOTE: The hookup line cannot be white, plastic
tubing. Licensed plumbers must use only copper
tubing NDA tubing #49595 or 49599 or Cross Link
Polyethylene (PEX) tubing.

Place the compression nut and ferrule (sleeve) for
copper tubing onto the end of the tubing and connect
it to the shutoff valve. Make sure the tubing is fully
inserted into the valve. Tighten the compression nut
securely.

4. FASTEN THE SHUTOFF VALVE
Fasten the shutoff valve to the cold water pipe with
the pipe clamp.

Saddle-Type
Shutoff Valve _

Pipe Clamp-

./
_I

ompression

Nut

Packing Nu_
Outlet Valve-Saddle-Ty_
Shutoff Valve

Vertical Cold
Water Pipe

Ferrule (sleeve)

NOTE: Commonwealth of Massachusetts Plumbing
Codes 248CMR shall be adhered to. Saddle valves are
illegal and their use is not permitted in
Massachusetts. Consult with your licensed plumber.

NOTE: Commonwealth of Massachusetts Plumbing
Codes 248CMR shall be adhered to. Saddle valves are
illegal and use is not permitted in Massachusetts.
Consult with your licensed plumber.

8. FLUSH OUT THE TUBING
Turn the main water supply on and
flush out the tubing until the water
is clear.

10. TURN THE WATER ON AT THE SHUTOFF VALVE
Tighten any connections that leak.

Shut the water off: at the water
valve after about one quart of
water has been flushed through the
tubing.
9. CONNECT THE TUBING TO THE
REFRIGERATOR
NOTE: Before making the connection to the
refrigerator, be sure that the refrigerator power cord is
not plugged into the wall outlet.
1. Remove the plastic flexible cap from the water valve.
_CAUTION:
Check to see if leaks occur at the water line
connections.

2. Place the compression nut and ferrule (sleeve) onto the
end of the tubing as shown.
3. Insert the end of the copper tubing into the connection
as far as possible. While holding the tubing, tighten the
fitting.

11. PLUG IN THE REFRIGERATOR
Arrange the coil of tubing so that it does not vibrate
against the back of the refrigerator or against the wall.
Push the refrigerator back to the wall.

Back of refrigerator

¼" (6.35 mm) Tubing
Tubing

1/4" (6.35 mm]
Compression
Nut

Ferrule
(Sleeve)

12. START THE ICEMAI(ER

Refrigerator
Connection

Set the icemaker

power switch to the ON (I) position.

The icemaker will not begin to operate until it reaches
its operating temperature of 15°F (-9°C) or below. It
will then begin operation automatically
if the icemaker
power switch is in the ON (I) position.

COOLING
Before conducting

troubleshooting,

make sure that the following

Service Flow

0.5 gpm (1.9 Ipm)

Water Supply

Potable Water

Water Pressure

40-120 psi (276 - 827 kPa)

Water Temperature
Electrical

iiiil!liiiii!
!ili

basic requirements

are met:

33°F - IO0°F (0.6°C - 38°C)
115 Volts, 60 Hz, AC only, and fused
at 15 amperes (minimum).

Ratings

iilllii! il

Refrigerator
and
Freezer section are
not cooling.

Cooling System runs
too much.

The power

iii
supply

cord

is unplugged.

Firmly plug
voltage.

the cord

into a live outlet

with

the proper

Refrigerator is set to demo mode. The
display shows the word "OFF."

Demo Mode allows the lights and control display
to
work normally
while disabling
cooling
to save energy
while on the showroom
floor. Refer to the Setting the
Controls
section for instructions
on how to disable
Demo Mode.

Refrigerator

is in the defrost cycle.

During the defrost cycle, the temperature
of each
compartment
may rise slightly.
Wait 30 minutes and
confirm
the proper temperature
has been restored
once the defrost cycle has completed.

Refrigerator

was recently installed.

It may take up to 24 hours for each
reach the desired temperature.

Refrigerator

was recently relocated.

If the refrigerator
was stored for a long period of time
or moved on its side, it is necessary
for the refrigerator
to lay upright for 24 hours before connecting
it to
power.

Refrigerator
model.

is replacing

Modern
refrigerators
require more operating
time
use less energy due to more efficient
technology.

an older

Refrigerator was recently plugged
or power restored.

The refrigerator
completely.

will take

compartment

but

up to 24 hours to cool

Door opened often or a large amount
of food / hot food was added.

Adding
food and opening the door warms the
refrigerator,
requiring
the compressor
to run longer in
order to cool the refrigerator
back down. In order to
conserve energy, try to get everything
you need out of
the refrigerator
at once, keep food organized
so it is
easy to find, and close the door as soon as the food is
removed.
(Refer to the Food Storage
Guide.)

Doors are not closed completely.

Firmly push the doors shut. If they will not shut all the
way, see the Doors will not close completely
or pop
open section in Parts & Features Troubleshooting.

Refrigerator
location.

The compressor
will run longer under warm conditions.
At normal room temperatures
(70°F/110°C)
expect
your compressor
to run about 40°,/o to 80°,/o of the
time. Under warmer
conditions, expect it to run even
more often. The refrigerator
should not be operated
above 110°F (43°C).

is installed

in a hot

Use a vacuum

Condenser / back cover is clogged.

condenser

cleaner

cover

an attachment

and vents. Do not remove
coil area.

covering the condenser

with

to clean the
the panel

COOLING

ii
was recently

Refrigerator or
Freezer section is too

Refrigerator

warm.

Air vents are blocked.

Rearrange items to allow air to flow throughout the
compartment.
Refer to the Airflow diagram in the
Using Your Refrigerator section.

Doors are opened often or for long
periods of time.

When the doors are opened often or for long periods
of time, warm, humid air enters the compartment.
This raises the temperature and moisture level within
the compartment.
To lessen the effect, reduce the
frequency and duration of door openings.

Unit is installed

The refrigerator should not be operated
temperatures above 110°F (43°C).

It may take up to 24 hours for each compartment
reach the desired temperature.

in a hot location.

A large amount of food or hot food
was added to either compartment.

Adding food warms the compartment
requiring the
cooling system to run. Allowing hot food to cool to
room temperature before putting it in the refrigerator
will reduce this effect.

Doors not closed correctly.

See the Doors will not close correctly or pop open
section in Parts & Features Troubleshooting.

Temperature
correctly.

If the temperature is too warm, adjust the control one
increment at a time and wait for the temperature to
stabilize. Refer to the Setting the Controls section for
more information.

control

is not set

Defrost cycle has recently

Interior moisture
buildup.

installed.

completed.

During the defrost cycle, the temperature of each
compartment
may raise slightly and condensation may
form on the back wall. Wait 30 minutes and confirm
the proper temperature has been restored once the
defrost cycle has completed.

Doors are opened often or for long
periods of time.

Doors not closed correctly.

See the Doors will not close correctly
Troubleshooting
section.

Weather

Humid weather allows additional moisture to enter the
compartments
when the doors are opened leading to
condensation or frost. Maintaining
a reasonable level
of humidity in the home will help to control the amount
of moisture that can enter the compartments.

is humid.

section in the

Defrost cycle recently completed.

During the defrost cycle, the temperature of each
compartment
may raise slightly and condensation may
form on the back wall. Wait 30 minutes and confirm
that the proper temperature has been restored once
the defrost cycle has completed.

Food is not packaged

Food stored uncovered or unwrapped, and damp
containers can lead to moisture accumulation within
each compartment. Wipe all containers dry and store
food in sealed packaging to prevent condensation and
frost.

correctly.

!!!

COOLING/ICE

& WATER

Food is freezing
in the refrigerator

Food with high water content was
placed near an air vent.

Rearrange
air vents.

compartment.

Refrigerator
incorrectly,

temperature

If the temperature is too cold, adjust the control one
increment at a time and wait for the temperature to
stabilize. Refer to the Setting the Controls section for
more information.

Refrigerator
location,

is installed

Frost or ice crystals
form on frozen food
(outside of package).

control is set

in a cold

Door is opened frequently
periods of time.

items with high water content away from

When the refrigerator is operated in temperature
below 41°F (5°C), food can freeze in the refrigerator
compartment. The refrigerator should not be operated
in temperature below 55°F (13°C).

or for long

When the doors are opened often or for long periods
of time, warm, humid air enters the compartment.
This
raises the temperature and moisture level within the
compartment.
Increased moisture will lead to frost
and condensation. To lessen the effect, reduce the
frequency and duration of door openings.

Door is not closing properly.

Refer to the Doors will not close correctly or pop
open section in the Troubleshooting section.

Refrigerator or
Freezer section is too
cold.

Incorrect temperature

If the temperature is too cold, adjust the control one
increment at a time and wait for the temperature to
stabilize. Refer to the Setting the Controls section for
more information.

Frost or ice crystals
on frozen food
(inside of sealed
package).

Condensation from food with a high
water content has frozen inside of the
food package.

This is normal for food items with a high water
content.

Food has been left in the freezer for
a long period of time.

Do not store food items with high water content in the
freezer for a long period of time.

Demand exceeds ice storage
capacity,

The icemaker will produce
a 24 hour period.

House water supply is not connected,
valve is not turned on fully, or valve is
clogged.

Connect the refrigerator to a cold water supply with
adequate pressure and turn the water shutoff valve
fully open.

Icemaker is not
making enough ice.

control settings.

If the problem
a plumber.
Water

filter has been exhausted.

Low house water supply pressure.

The water pressure must be between 20 and 120 psi
(138 to 827 kPa) on models without a water filter and
between 40 and 120 psi (276 to 827 kPa) on models
with a water filter.

system is

Tubing connecting refrigerator
house supply valve is kinked.

that you replace the water filter:

Approximately
every 6 months.
When the water filter indicator turns on.
When the water dispenser output decreases.
When the ice cubes are smaller than normal.

If the problem
a plumber.
Reverse Osmosis filtration
used.

100 cubes in

persists, it may be necessary to contact

It is recommended
•
•
•
•

approximately

persists, it may be necessary to contact

Reverse osmosis filtration systems can reduce the
water pressure below the minimum amount and result
in icemaker issues. (Refer to Water Pressure section.)
The tubing can kink when the refrigerator is moved
during installation or cleaning resulting in reduced
water flow. Straighten or repair the water supply line
and arrange it to prevent future kinks.

ICE & WATER

Icemaker is not
making enough ice
(continued).

Dispensing water
slowly.

Doors are opened often or for long
periods of time.

If the doors of the unit are opened often, ambient
air will warm the refrigerator which will prevent the
unit from maintaining the set temperature. Lowering
the refrigerator temperature can help, as well as not
opening the doors as frequently.

Doors are not closed completely.

If the doors are not properly closed, ice production
will be affected. See the Doors will not close
completely or pop open section in Parts & Features
Troubleshooting
for more information.

The temperature setting for the
freezer is too warm.

The recommended temperature for the freezer
compartment
for normal ice production is O°F. If the
freezer temperature is warmer, ice production will be
affected.

Water

It is recommended

filter has been exhausted.

•
•
•
•
Reverse osmosis filtration
used.

system is

Approximately
every 6 months.
When the water filter indicator turns on.
When the water dispenser output decreases.
When the ice cubes are smaller than normal.

Reverse osmosis filtration systems can reduce the water
pressure below the minimum amount and result in
icemaker issues.
If the problem
a plumber.

Low house water supply pressure.

ice.

persists, it may be necessary to contact

The water pressure must be between 20 and 120 psi
(138 to 827 kPa) on models without a water filter and
between 40 and 120 psi (276 to 827 kPa) on models
with a water filter.
If the problem
a plumber.

Not dispensing

that you replace the water filter:

persists, it may be necessary to contact

Doors are not closed completely.

Ice will not dispense if any of the refrigerator
are left open.

Infrequent

Infrequent use of the ice dispenser will cause the cubes
to stick together over time, which will prevent them
from properly dispensing. Check the ice bin for ice
cubes clumping/sticking
together. If they are, break up
the ice cubes to allow for proper operation.

use of the dispenser.

The delivery chute is clogged
frost or ice fragments.

The dispenser display

with

doors

Eliminate the frost or ice fragments by removing the
ice bin and clearing the chute with a plastic utensil.
Dispensing cubed ice can also help prevent frost or ice
fragment buildup.
Press and hold the Lock button for three seconds to
unlock the control panel and dispenser.

is locked.

Ice bin is empty.

It may take up to 24 hours for each compartment to
reach the desired temperature and for the icemaker
to begin making ice. Make sure that the shutoff (arm/
sensor) is not obstructed.
Once the ice supply in the bin has been completely
exhausted, it my take up to 90 minutes before
additional ice is available,
and approximately
24
hours to completely refill the bin.

ICE & WATER

s
Icemaker is not
making ice.

Refrigerator was recently installed or
icemaker recently connected,

It may take up to 24 hours for each compartment to
reach the desired temperature and for the icemaker to
begin making ice.

Icemaker

Locate the icemaker ON/OFF
it is in the ON (I) position.

not turned on.

The ice detecting

Not dispensing
water.

sensor is obstructed.

switch and confirm

that

Foreign substances or frost on the ice-detecting
sensor
can interrupt ice production. Make sure that the sensor
area is clean at all times for proper operation.

The refrigerator
is not connected to
a water supply or the supply shutoff
valve is not turned on.

Connect refrigerator to the water supply and turn the
water shutoff valve fully open.

Icemaker shutoff (arm or sensor)
obstructed.

If your icemaker is equipped with an ice shutoff arm,
make sure that the arm moves freely. If your icemaker
is equipped with the electronic ice shutoff sensor,
make sure that there is a clear path between the two
sensors.

Reverse osmosis water filtration
system is connected to your cold
water supply.

Reverse osmosis filtration systems can reduce the
water pressure below the minimum amount and result
in icemaker issues. (Refer to the Water Pressure
section.)

New installation
connected.

Dispense 2.5 gallons (9.5 I) of water (flush for
approximately
5 minutes) to remove trapped air and
contaminants from the system. Do not dispense the
entire 2.5 gallon (9.5 I) amount continuously. Depress
and release the dispenser pad for cycles of 30
seconds ON and 60 seconds OFF.

or water line recently

The dispenser panel is locked.

Press and hold the Lock button for three seconds to
unlock the control panel and dispenser.

The dispenser is not set for water
dispensing.

The dispenser can be set for ice or water. Make
certain that the control panel is set for the proper
operation. Press the Water button on the control panel
to dispense water.

Refrigerator or freezer doors are not
closed properly.

Water will not dispense if any of the refrigerator
doors are left open.

Water filter has been recently
removed or replaced.

After the water filter is replaced, dispense 2.5 gallons
(9.5 I) of water (flush for approximately
5 minutes) to
remove trapped air and contaminants from the system.
Do not dispense the entire 2.5 gallon (9.5 I) amount
continuously. Depress and release the dispenser pad
for cycles of 30 seconds ON and 60 seconds OFF.

Tubing connecting refrigerator
house supply valve is kinked.

The tubing can kink when the refrigerator is moved
during installation or cleaning resulting in reduced
water flow. Straighten or repair the water supply line
and arrange it to prevent future kinks.

The house water supply is not
connected, the valve is not turned on
fully, or the valve is clogged.

Connect refrigerator to the water supply and turn the
water shutoff valve fully open.
If the problem
a plumber.

persists, it may be necessary to contact

ICE & WATER

!
Ice has bad taste or
odor.

ii
Water supply contains
as sulfur,

minerals such

!
A water filter may need to be installed
taste and odor problems.

to eliminate

NOTE: In some cases, a filter may not help. It may not
be possible to remove all minerals / odor / taste in all
water supplies.
Icemaker was recently

Ice has been stored for too long.

Ice that has been stored for too long will shrink,
become cloudy, and may develop a stale taste. Throw
away old ice and make a new supply.

The food has not been stored
properly in either compartment.

Rewrap the food. Odors may migrate to the ice if
food is not wrapped properly.

The interior of the refrigerator
to be cleaned.

Dispensing warm
water.

Discard the first few batches of ice to avoid discolored
or bad tasting ice.

installed.

needs

See the Care and Cleaning
information.

section for more

The ice storage bin needs to be
cleaned.

Empty and wash the bin (discard old cubes). Make
sure that the bin is completely dry before reinstalling
it.

Refrigerator

Allow 24 hours after installation
tank to cool completely.

was recently

installed.

for the water storage

The water dispenser has been used
recently and the storage tank was
exhausted.

Depending on your specific model, the water storage
capacity will range from approximately
20 to 30 oz
(0.6 to 0.9 liter).

Dispenser has not been used for
several hours.

If the dispenser has not been used for several hours,
the first glass dispensed may be warm. Discard the
first 10 oz.

Refrigerator is connected
water supply.

Make sure that the refrigerator
water pipe.

to the hot

is connected

_WARNING:
Connecting the refrigerator
water line may damage the icemaker.
Water has bad taste
or odor.

Water supply contains
as sulfur.
Water

minerals such

filter has been exhausted.

A water filter may need to be installed
taste and odor problems.
It is recommended
•
•
•
•

Refrigerator

Icemaker is making
too much ice.

was recently

installed.

Icemaker shutoff: (arm/sensor)
obstructed.

to a cold

to a hot

to eliminate

that you replace the water filter:

Approximately
every 6 months.
When the water filter indicator turns on.
When the water dispenser output decreases.
When the ice cubes are smaller than normal.

Empty the ice bin. If your icemaker is equipped with
an ice shutoff: arm, make sure that the arm moves
freely. If your icemaker is equipped with the electronic
ice shutoff: sensor, make sure that there is a clear path
between the two sensors. Reinstall the ice bin and wait
24 hours to confirm proper operation.

!!!

NOISE

i iil!liiiii!,!,iJ iiiii!!i
lii!
!l,,:,,,iil
!ili ii

iiliiiiiiiliiii

iiii i

iiii,

Clicking

The defrost control will click when
the automatic defrost cycle begins
and ends. The thermostat control (or
refrigerator control on some models)
will also click when cycling on and
off:.

Normal

Operation

Rattling

Rattling noises may come from the
flow of refrigerant, the water line on
the back of the unit, or items stored
on top of or around the refrigerator.

Normal

Operation

Refrigerator
the floor.

Floor is weak or uneven or leveling legs need to be
adjusted. See the Door Alignment section.

is not resting solidly on

Refrigerator with linear compressor
was jarred while running.

Normal

Operation

Evaporator fan motor is circulating
air through the refrigerator
and
freezer compartments.

Normal

Operation

Air is being forced over the condenser
by the condenser fan.

Normal

Operation

Gurgling

Refrigerant flowing through the
cooling system.

Normal

Operation

Popping

Contraction and expansion of the
inside walls due to changes in
temperature.

Normal

Operation

Sizzling

Water dripping on the defrost
during a defrost cycle.

Normal

Operation

Vibrating

If the side or back of the refrigerator
is touching a cabinet or wall, some of
the normal vibrations may make an
audible sound.

To eliminate the noise, make sure that the sides and
back cannot vibrate against any wall or cabinet.

Dripping

Water running into the drain pan
during the defrost cycle.

Normal

Operation

Pulsating or HighPitched Sound

Your refrigerator is designed to run
more efficiently to keep your food
items at the desired temperature. The
high efficiency compressor may cause
your new refrigerator to run longer
than your old one, but it is still more
energy efficient than previous models.
While the refrigerator is running, it is
normal to hear a pulsating or highpitched sound.

Normal

Operation

Whooshing

heater

!i!iii

PARTS AND FEATURES

Doors will not close
correctly or pop

Food packages
open.

open.

Ice bin, crisper cover, pans, shelves,
door bins, or baskets are out of
position.

Push bins all the way in and put crisper cover, pans,
shelves and baskets into their correct positions. See the
Using Your Refrigerator section for more information.

The doors were removed during
product installation and not properly
replaced.

Remove and replace the doors according to the
Removing and Replacing Refrigerator Handles and
Doors section.

Refrigerator

See Door Alignment in the Refrigeration
section to level refrigerator.

Doors are difficult
open.

Refrigerator wobbles
or seems unstable,

Lights do not work.

are blocking the door

is not leveled properly.

Rearrange
shelves.

food containers

to clear the door and door

Installation

The gaskets are dirty or sticky.

Clean the gaskets and the surfaces that they touch.
Rub a thin coat of appliance polish or kitchen wax on
the gaskets after cleaning.

Door was recently

When you open the door, warmer air enters the
refrigerator. As the warm air cools, it can create a
vacuum. If the door is hard to open, wait one minute
to allow the air pressure to equalize, then see if it
opens more easily.

closed.

Leveling legs are not adjusted
properly.

Refer to the Leveling and Door Alignment

Floor is not level.

It may be necessary to add shims under the leveling
legs or rollers to complete installation.

A light bulb has burned out.

Replace with an appliance bulb of the same wattage,
size and shape (available at your local hardware
store). Refer to the Light Bulb Replacement section.

NOTE: The refrigerator compartment
lamp is LED interior lighting, and
service should be performed by a
qualified technician. (This statement
only applies for certain models.)
A light bulb is loose in the socket.

section.

Unplug the refrigerator
or turn off: power at the circuit
breaker or fuse box. Gently remove the bulb and
reinsert. Reconnect power and reset the refrigerator
control. Refer to the Light Bulb Replacement section
for instructions on removing your light bulb.

!!!

Kenmore

Connect

(on some models)

Should you experience any problems with your
refrigerator, it has the capability of transmitting data
via your telephone to the Kenmore Connect TM Team.
This gives you the capability of speaking directly to
our trained specialists. The specialist records the data
transmitted from your machine and uses it to analyze the
issue, providing a fast and effective diagnosis.

Hold the mouthpiece of your phone in front of the
speaker that is located on the right hinge of the
refrigerator door, when instructed to do so by the call
center.

If you experience
problems
with your refrigerator,
call
1-800-4-MY-HOME
®. Only use the J
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.2
Linearized : No
Page Count : 43
Page Layout : SinglePage
Page Mode : UseNone
Producer : Goby Monitor Application version 3, 2, 1, 4
Create Date : Sat Sep 13 07:06:08 2014
Author :
Title :
Subject :

EXIF Metadata provided by EXIF.tools

Kenmore Elite 79551822410 User Manual REFRIGERATOR Manuals And Guides 1408237L

Navigation menu

Versions of this User Manual:

Views

Navigation