Kenmore Elite 795 5107 Users Manual

795.5107 to the manual b92d8214-ce77-4fc6-b15c-9eec4d32cbab

2015-01-24

: Kenmore Kenmore-Elite-795-5107-Users-Manual-327848 kenmore-elite-795-5107-users-manual-327848 kenmore pdf

Open the PDF directly: View PDF .
Page Count: 33

Download
Open PDF In Browser	View PDF

Use & Care Guide
Manual de Uso y Cuidado
Guide d'Utilisation et d'Entretien
English / Espa_ol / Fran_ais

ModeJs/ModeJos/Mod_Jes: 795.5107% 795.5108 _

Kenmore Eli?co
@

P sse

P/N

MFL63729001

Sears Brands Management Corporation
Hoffman Estates, IL 60179 U.S.A.
www.kemoracorn
www.sears.com
Sears Canada inc.
Toronto, Ontario, Canada
www.sears.ca

M5B 2B8

Warranty

Refrigerator Shelves

Protection Agreements

Freezer Shelf

important Safety instructions

Grounding

Requirements

installation

7 - 14

Refrigerator

22 - 23
23

Filter

24 =25

Water Filter

Performance Data Sheet

Unpacking your Refrigerator

installation

General Cleaning Tips

Base Grille installation

Outside

Leveling The Refrigerator Door

Inside Walls

Handle Removal

Door Liners And Gaskets

9 - 10

Plastic Parts

Door Alignment

Back Cover

Connecting The Water Line

Light (LED) Replacement

Before You Begin

Power Interruptions

What You Will Need

When You Go On Vacation

When You Move

When Should You Set The Icemaker Power
Switch To Off (O)

Normal Sounds You May Hear

Removing And Replacing Refrigerator Doors

installation instructions
Refrigerator

Features

Using Your Refrigerator

13 - 14
15

Care And Cleaning

Control Panel Features

Troubleshooting

16 - 18

Adjusting Control Settings

Food Storage Guide

Storing Frozen Food

Water And ice Dispenser

ice Storage Bin

Door Rack And Support

Snack Pan

Crisper And Crisper Cover
Airtight Crisper And Airtight Crisper Cover

26 - 27

16 =24

Ensuring Proper Air Circulation

Refrigerator And Freezer Controls

26 =27

21 - 22
22

Guide

28 =32

SIDE=BY=SIDE REFRIGERATOR
TM

Kenmore Elite Limited Warranty
When installed, operated and maintained according to all instructions supplied with the product, if any non=consumable
3art of this appliance other than the sealed refrigerant system fails due to a defect in material and workmanship within
one year from the date of purchase, call 1=800=4=MY-HOME®to arrange for free repair. This coverage applies for only 90
days from the date of purchase if this appliance is ever used for other than private family purposes.
If the sealed refrigerant system is defective within five years from the purchase date, call 1=800-4=MY-HOME ®to arrange
for free repair. This coverage applies for only one year from the date of purchase if this appliance is ever used for other
than private family purposes.
This warranty

covers only defects in material and workmanship.

Sears will NOT pay for:

1. Expendable items that can wear out from normal use, including but not limited to filters, belts, light bulbs, and bags.
2. A service technician to instruct the user in correct product installation, operation or maintenance.
3. A service technician to clean or maintain this product.
4. Damage to or failure of this product if it is not installed, operated or maintained according to the all instructions
supplied with the product.
5. Damage to or failure of this product resulting from accident, abuse, misuse or use for other than its intended purpose.
6. Damage to or failure of this product caused by the use of detergents, cleaners, chemicals or utensils other than those
recommended in all instructions supplied with the product.
7. Damage to or failure of parts or systems resulting from unauthorized modifications made to this product.
Disclaimer

of implied warranties;

limitation

of remedies

Customer's sole and exclusive remedy under this limited warranty shall be product repair as provided herein. Implied
warranties, including warranties of merchantability or fitness for a particular purpose, are limited to one year or the
shortest period allowed by law. Sears shall not be liable for incidental or consequential damages. Some states and
provinces do not allow the exclusion or limitation of incidental or consequential damages, or limitation on the duration of
implied warranties of merchantability or fitness, so these exclusions or limitations may not apply to you.
This warranty applies only while this appliance is used in the United States or Canada.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears Brands Management Corporation, Hoffman Estates, IL 60179
Sears Canada Inc., Toronto, Ontario, Canada M5B 2B8

Master

Protection

Agreements

Congratulations
on making a smart purchase.Your new
Kenmore _ product is designed and manufactured for years
of dependable operation. But like all products, it may
require preventive maintenance or repair from time to time.
That's when having a Master Protection Agreement can
save you money and aggravation.
The Master Protection Agreement also helps extend the life
of your new product. Here's what the Agreement* includes:
[] Parts and labor needed to help
properly under normal use, not
coverage goes well beyond the
deductibles, no functional failure
coverage - real protection.

keep products operating
just defects. Our
product warranty.
No
excluded from

[] Expert service by a force of more than 10,000
authorized Sears service technicians,
which means
someone you can trust will be working on your product.
[] Unlimited service calls and nationwide service, as
often as you want us, whenever you want us.
[] "No-lemon"
guarantee
replacement of your covered
product if four or more product failures occur within
twelve months.
[] Product
Fixed.

replacement

if your covered product

[] Annual Preventive Maintenance
Request - no extra charge.

Once you purchase the Agreement, a simple phone call is
all that it takes for you to schedule service. You can call
anytime day or night, or schedule a service appointment
online.
The Master Protection Agreement is a risk free purchase.
If you cancel for any reason during the product warranty
period, we will provide a full refund. Or, a prorated refund
anytime after the product warranty period expires.
Purchase your Master Protection Agreement today!
Some limitations and exclusions apply. For prices and
additional information in the U.S.A. call 1-800-827=6655.
*Coverage in Canada varies on some items. For full
details call Sears Canada at 1-800=361-6655.
Sears Installation Service
For Sears professional instaflation Of home appliances,
garage door openers, water heaters, and other major
home items, in the U.S.A. or Canada call
1-800-4-MY-HOME ®.

can not be

Check at your

[] Fast help by phone- we call it Rapid Resolution
phone support from a Sears representative
on all
products. Think of us as a "talking owner's manual."
[] Power surge protection
to power fluctuations.

against electrical

damage

due

[] $250 Food Loss Protection
annually for any food
spoilage that is the result of mechanical failure of any
covered refrigerator or freezer.
[]Rental
reimbursement
if repair of your covered product
takes longer than promised.
[]10% discount
off the regular price of any non-covered
repair service and related installed parts.

In the space below, record the date of purchase, model and serial number of your product. You will find the model and
serial number printed on an identification label located on the right-hand side of the refrigerator compartment. Have
these items of information available whenever you contact Sears concerning your product.
Model No.
Serial No.

Date of Purchase
Dealer

Save these instructions and attach your sales receipt for future reference.

Thisguidecontainsmanyimportant
safetymessages.
Alwaysreadandobey.
Thisis thesafetyalertsymbol.It alertsyoutosafetymessages
thatinformyouofhazardsthatcankillor
hurtyouor others,or causedamagetotheproduct.Allsafetymessages
willbepreceded
bythesafetyalert
symbolandthehazardsignalwordDANGER,
WARNING,
or CAUTION.
Thesewordsmean:

DANGER

You wil___/i
be killed or seriously injured if you do not follow instructions.

WAR,

You can be killed or seriously injured if you do not follow instructions.

N_NG

CAUTION

Indicates an imminently hazardous situation which, if not avoided, may result in minor or moderate
injury, or product damage only.

All safety messages will identify the hazard, tell you how to reduce the chance of injury and tell you what can happen if the
instructions are not followed.

To reduce the risk of fire, electric shock or injury to
persons when using your product, basic safety
precautions should be followed, including the
following. Read all instructions before using this
appliance:
• NEVER unplug your refrigerator by pulling on the power
cord. Always grip the plug firmly and pull it straight out
from the outlet.
• Repair or replace immediately all electric service cords
that have become frayed or otherwise damaged. Do not
use a cord that shows cracks or abrasion damage along
its length or at either the plug or connector end.
• When moving your refrigerator away from the wall, be
careful not to roll over or damage the electrical service
cord in any way.
• Do not crush or damage the water line.
• Do not store or use gasoline or other flammable vapors
or liquids in the vicinity of this or any other appliance.
• Do not allow children to climb, stand or hang on the
refrigerator doors or shelves in the refrigerator. They
could damage the refrigerator and seriously injure
themshelves.
• Keep fingers out of 'pinch point' areas; clearances
between the doors and cabinet are necessarily small.
Be careful when you open the doors when children are
in the area.
• Unplug your refrigerator before cleaning or making any
repairs.
NOTE: We strongly recommend that any servicing be
performed by a qualified individual.
• Do not store bottles in the freezer compartment, they
may break when frozen, causing damage.
• The refrigerator-freezer should be positioned so that
the supply plug is accessible for quick disconnection if an
accident happens.
• For personal safety, this appliance must be properly
grounded. Have the wall outlet and the circuit checked
by a qualified electrician to make sure the outlet is
properly grounded.

• This refrigerator must be properly installed in accordance
with the 'Attention Installer' instructions that were taped
to the front of the refrigerator.
• After your refrigerator is in operation, do not touch the
cold surfaces in the freezer compartment when hands
are damp or wet. Skin may adhere to the extremely cold
surfaces.
• In refrigerators with automatic icemakers, avoid contact
with the moving parts of the ejector mechanism, or with
the heating element that releases the cubes.
DO NOT place fingers or hands on the automatic ice
making mechanism while the refrigerator is plugged in.
• DO NOT refreeze frozen foods which have thawed
completely. The United States Department of Agriculture
in Home and Garden Bulletin No. 69 says:
"...You may safely refreeze frozen foods that have thawed
if they still contain ice crystals or if they are still cold below
40°F (4°C). ''
"Thawed ground meats, poultry, or fish that have any
off-odor or off-color should not be frozen and should not
be eaten. Thawed ice cream should be discarded. If the
odor or color of any food is poor or questionable, get rid of
it. The food may be dangerous to eat."
"Even partial thawing and refreezing reduces the eating
quality of foods, particulary fruits, vegetables and prepared
foods. The eating quality of red meats is affected less than
that of many other foods. Use refrozen foods as soon as
possible to save as much of their quality as you can."

SAVE THESE INSTRUCTIONS

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.

Child entrapment and suffocation are not problems of
the past. Junked or abandoned refrigerators are still
dangerous.., even if they will sit for "just a few days".
If you are getting rid of your old refrigerator, please
follow the instructions at right to help prevent accidents.

Before you throw away your old
refrigerator or freezer:
• Take off the doors.
• Leave the shelves in place so that children
may not easily climb inside.

Your old refrigerator may have a cooling system that
used CFCs (chlorofluorocarbons). CFCs are believed to
harm stratospheric ozone. If you are throwing away your
old refrigerator, make sure the CFC refrigerant is
removed for proper disposal by a qualified servicer. If
you intentionally release this CFC refrigerant, you can
be subject to fines and imprisonment under provisions

of environmental legislation. This appliance contains
fluid (refrigerant, lubricant), and is made of parts and
materials which are reusable and / or recyclable. All the
important materials should be sent to the collection
center of waste material and can be reused after rework
(recycling). To recycle, please contact your local agency.

IMPORTANT:

Use of an extension cord will increase the clearance
needed for the back of the refrigerator. If the supply cord
is damaged, it must be replaced by the manufacturer or
its service agent or a similarly qualified person in order
to avoid any hazard.

Please read carefully.

TO CONNECT

ELECTRICITY

Electrical

Shock

Hazard

FOR PERSONAL SAFETY, this appliance must be
properly grounded. Have the wall outlet and the
circuit checked by a qualified electrician to make sure
the outlet is properly grounded.
3-prong
grounding type
wall receptacle --_..,
3-prong
grounding
plug

sure proper
ground exists

before use.

USE OF EXTENSION

CORDS

Because of potential safety hazards under certain
conditions, we strongly recommend against the use of an
extension cord. However, if you still elect to use an
extension cord, it is absolutely necessary that it be a
UL-listed (in the United States), 3-wire grounding type
appliance extension cord having a grounding type plug and
outlet, and that the electrical rating of the cord be
15 amperes (minimum) and 120 volts.

RECOMMENDED

GROUNDING

METHOD

The refrigerator should always be plugged into its own
individual properly grounded electrical outlet rated for
115 volts, 60Hz, AC only and fused at 15 or 20 amperes.
This provides the best performance and also prevents
overloading house wiring circuits which could cause a fire
hazard from overheated wires. It is recommended that a
separate circuit serving only this appliance be provided.
Use a receptacle which cannot be turned off with a switch
or pull chain. Do not use an extension cord.
Where a standard two-prong wall outlet is encountered, it
is your personal responsibility and obligation to have it
replaced with a properly grounded three-prong wall outlet.
Do not, under any circumstances, cut or remove the third
(Ground) prong from the power cord.
NOTE: Before performing any type of installation or
cleaning, disconnect the refrigerator from the
electrical source.

INSTALLATION
Excessive Weight Hazard
Use two or more people to move and install the
refrigerator.
Failure to do so can result in back or other injury.

UNPACKING

YOUR REFRIGERATOR

Remove tape and any temporary labels from your
refrigerator before using. Do not remove any warning
type labels, the model and serial number label, or the
Technical Data sheet located under the front part of the
refrigerator, behind the base grille.
To remove any remaining tape or glue, rub the area
briskly with your thumb. Tape or glue residue can also
be easily removed by rubbing a small amount of liquid
dish soap over the adhesive with your fingers. Wipe with
warm water and dry.

1. Avoid placing unit near heat sources, direct sunlight or
moisture.
2. To minimize noise and vibration, the refrigerator
MUST be installed on a solidly constructed floor.
3. Carpeting and soft tile surfaces are not recommended.
4. NEVER install the refrigerator on a platform or a
weakly supported structure.
5. Install this appliance in an area where the
temperature is between 55°F (13°C)and 110°F (43°C).
If the temperature around the appliance is too low or
high, cooling ability may be adversely affected.
NOTE: For proper air circulation, best cooling and energy
consumption results, maintain a minimum distance
of 2 inches (5.08cm) from adjacent items and
surfaces.
2" (5.08 cm)_

Do not use sharp instruments, rubbing alcohol,
flammable fluids or abrasive cleaners to remove tape or
glue. These products can damage the surface of your
refrigerator. For more information, see the Important
Safety Instructions
section.
Refrigerator shelves are installed in the shipping
position.

2" (5.08

cm) 4"

2" (5.08

cm) _"

"_-2" (5.08 cm)

Please reinstall shelves according to your individual
storage needs.
• Be careful when you work with the hinge, base grille,
stopper, etc. You may be injured.
When Moving Your Refrigerator
Your refrigerator is heavy. When moving the
refrigerator for cleaning or service, be sure to protect
the floor. Always pull the refrigerator straight out when
moving it. Do not wiggle or walk the refrigerator when
trying to move it, as floor damage could occur.

• Do not put hands or metal sticks into air vents, base
grille or bottom of the refrigerator. You may be injured
or receive an electrical shock.

BASE GRILLE

INSTALLATION

To install or replace base grille:
1. Remove the 2 screws from the bottom front part of
refrigerator.
2. Place base grille into position and insert and tighten
screws.
To remove the base grille:

Explosion
Hazard
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Failure to do so can result in death, explosion

or fire.

1. Open the doors. (Refrigerator and freezer).
2. Once doors are open, remove screws from base
grille. Remove base grille and set safely aside.
3. Reattach screws to the base of refrigerator.

LEVELING

THE REFRIGERATOR

DOOR

HANDLE

Place level on top of the refrigerator as shown below.

REMOVAL

You may have to remove the door handles to move the
refrigerator through a narrow opening. See instructions
below.
NOTE: To avoid damaging door surfaces when moving the
refrigerator through narrow openings, it is ALWAYS
recommended to remove the doors as instructed in
the next two pages.
* Loosen the set screws with a _2" (2.38 mm) Allen
wrench and remove the handle.
NOTE: If the handle mounting fasteners need to be
tightened or moved, use a 1/4"(6.35 mm) Allen
wrench.

Mounting
fasteners

If your refrigerator is not level, insert a flat blade
screwdriver into the grooves of the leveling legs (shown
in picture below). Rotate legs clockwise to raise or
counterclockwise to lower the front of the refrigerator.

Left leveling
leg

Right

leveling

Set screw

leg

Allen wrench
Raise the front of the refrigerator enough so the doors
close freely when opened halfway. The refrigerator
should slope 1/4"(6.35 mm) to ½" (0.127 mm) from front
to back.
Then level the refrigerator from side to side.

Removing the left (freezer) door with water line
connection.

ElectricShockHazard
• Disconnect
electricalsupplytotherefrigerator
beforeinstalling.
Failuretodosocouldresultin
deathor seriousinjury.
• Donotputhands,feetor otherobjectsintothe
airvents,basegrille,or bottomoftherefrigerator.
Youmaybeinjuredor receiveanelectricalshock.
• Becarefulwhenyouworkwiththehinge,base
grille,andstopper.Youmaybeinjured.

• Pull up the water feed tube while pressing area
(Figure 1) as shown in the figure below.
• NOTE: If a tube end is deformed or abraded, trim the
part away. Disconnecting the tube under the door
causes about 0.13 gallons (0.5 liters) water to
flow out. Put a large container at end of tube to
prevent water from draining onto the floor.

Figure

REMOVING AND REPLACING
REFRIGERATOR
DOORS

Before removing the doors, remove the base grille.
See BASE GRILLE INSTALLATION for reference.
To remove the right (refrigerator)

door:
(2)

S
(1)\

...........
/2 _q
(5)
z(3)

,_<._'\

_7)
/(7)

Type 1

i(4)/
Rivet/

Type2

1. Open the door. Remove the top hinge cover screw
(1).
2. Use a flat blade screwdriver to pry back the hooks
(not shown) of the hinge cover from the top of the
refrigerator cabinet (2). Lift up the cover.
3.Rotate the hinge lever (3) clockwise. Lift the top hinge
(4) free of the hinge lever latch (5).

"1\.._

,Type 2
1. Open the door. Remove the top hinge cover screw (1).
2. Use a flat blade screwdriver to pry back the hooks
(not shown) of the hinge cover from the top of the
refrigerator cabinet (2). Lift up the cover.
3. Disconnect all the wire harnesses (3).
4. Remove the grounding screw (4).

NOTE: Regardless of hinge lever type, removal process is
the same.

5. Rotate hinge lever (5) counterclockwise. Lift the top
hinge (6) free of the hinge lever latch (7).

4. Lift the door from the lower hinge pin.

NOTE: Regardless of hinge lever type, removal process is
the same.

5. Place the door, inside facing up, on a nonscratching
surface.
CAUTION:
When lifting the hinge free of the latch,
be careful that the door does not fall forward.

CAUTION: When lifting the hinge free of the latch,
be careful that the door does not fall forward.
6. Lift the door from the lower hinge pin being careful to
pull the water lines through the lower hinge pin.
7. Place the door, inside facing up, on a nonscratching
surface.

Reinstallingthe right (refrigerator)door

Type1

5.Reconnect
thewatertubesbyinsertingthetubesinto
theconnectors.

Type2

1.Placethedoorontothelowerhingepin.
2. Fittophinge(4)overhingeleverlatch(5)into
place.Rotatelever(3)counterclockwise
tosecure
hinge.
NOTE:Regardless
ofhingelevertype,reinstallation
processis thesame.
3.Hooktabonswitchsideofcornerunderedgeofwire
openingin cabinettop.Positioncover(2)intoplace.
Insertandtightencoverscrew(1).
Reinstallingthe left(freezer)door
S'

(1)\

(4).

1. Feed the water tubes through the lower hinge pin and
place the door onto the lower hinge pin.
2. Fit top hinge (6) over hinge lever latch (7) and into
place. Rotate lever (5) clockwise to secure hinge.
NOTE: Regardless of hinge lever type, reinstallation
process is the same.
3. Install the grounding screw (4) and connect all the
wire harnesses (3).
4. Hook tab on door switch side of cover (2) under edge
of wire opening in cabinet top. Position cover into
place. Insert and tighten cover screw (1).

DOOR ALIGNMENT

Type 2
Adjusting tools: %6" (8 mm) wrench and
wrench 3/4"(19 ram)

Remove the base grille before adjusting the doors.
See BASE GRILLE INSTALLATION for reference.
Two methods of door alignment are available based on
the amount of adjustment needed and installation
requirements.

Keeper nut

t Wrench

Type 1
Adjusting tooh Fiat blade screwdriver
If the freezer compartment door is lower than the
refrigerator compartment door, level them by inserting a
flat blade screwdriver into the groove of the left leveling leg
and rotating it clockwise.

Left leveling
leg

Height
difference

hinge pin

Down_

!_'

_'__

Height
difference

Using a ¾" (19 mm) wrench, turn the keeper nut clockwise
to loosen the keeper nut.
Using a %6"(8 mm) wrench, turn the adjustment hinge pin
clockwise or counterclockwise to level the refrigerator and
freezer door.
After leveling the door, turn the keeper nut counterclockwise
to tighten.
CAUTION: Do not overtight the door adjustment screw.
The hinge pin can be pulled out. (Adjustable range of
height is a maximum of ½" (1.27 cm)).

If the freezer compartment door is higher than the
refrigerator compartment door, level them by inserting a
flat blade screwdriver into the groove of the right leveling
leg and rotating it clockwise.

AFTER

LEVELING

THE DOOR

HEIGHT

Confirm all legs are in contact with the floor.

Height
difference
_._

Right leveling

leg

CONNECTING

THE WATER

LINE

WHAT YOU WILL NEED
• Copper Tubing, 1/4"(6.35 mm) outer

NOTE: Water line installation is needed when the
Automatic Icemaker and/or Water Dispenser
features are available on your product.

BEFORE

diameter to connect the refrigerator
to the water supply. Be sure both
ends of the tubing are cut square.

YOU BEGIN

///
///

To determine how much tubing you need, measure
the distance from the water valve on the back of the
refrigerator to the water supply pipe. Then add 8 feet
(2.4 m). Be sure there is sufficient extra tubing (about 8
feet [2.4 m] coiled into 3 turns of about 10" [25 cm]
diameter) to allow the refrigerator to move out from the
wall after installation.

This water line installation is not warranted by the
refrigerator or icemaker manufacturer or seller. Follow
these instructions carefully to minimize the risk of
expensive water damage.
Water hammer (water banging in the pipes) in house
plumbing can cause damage to refrigerator parts and
lead to water leakage or flooding. Call a qualified
plumber to correct water hammer before installing the
water supply line to the refrigerator

Be sure that the kit you select allows at least 8 feet
(2.4 m) as described above.
• A cold water supply.The water pressure must be
between 20 and 120 PSI (1.4 bar and 8.2 bar) on
models without a water filter and between
40 and 120 PSI (2.8 bar and 8.2 bar) on models with
a water filter.

To prevent burns and product damage, do not hook up
the water line to the hot water line.
If you use your refrigerator before connecting the water
line, make sure the icemaker power switch is in the OFF
(O) position.

• Power drill.

Do not install the icemaker tubing in areas where
temperatures fall below freezing.

• 1/2"(12.7 ram) or
Adjustable Wrench.

When using any electrical device (such as a power
drill) during installation, be sure the device is doubleinsulated or grounded in a manner to prevent the hazard
of electric shock, or is battery-powered.
All installations must be in accordance with local

• Flat head and Phillips
screwdrivers.
• Two 1/4" (6.35 mm) outer diameter
compression
nuts and 2
ferrules (sleeves) to
connect the copper tubing to
the shutoff valve and the
refrigerator water valve.

plumbing code requirements.
NOTE: Wear eye protection.
• If a reverse osmosis water filtration system is
connected to your cold water supply, the water line
installation is not warranted by the refrigerator or
icemaker manufacturer or seller. Follow next instruction
carefully to minimize the risk of expensive water
damage.

• If your existing copper water
line has a flared fitting at the
end, you will need an
adapter (available at
plumbing supply stores) to
connect the water line to the refrigerator OR you can
cut off the flared fitting with a tube cutter and then use
a compression fitting.

• If a reverse osmosis water filtration system is
connected to your cold water supply, the water pressure
to the reverse osmosis system needs to be a minimum
of 40 to 60 PSI (2.8 kg.f/cm 2- 4.2 kg.f/cm 2,less than
2-3 sec to fill a cup of 7 oz capacity).

, Shutoff valve to connect to
the cold water line. The
shutoff valve should have a
water inlet with a minimum
inside diameter of %2"
(3.96 mm) at the point of connection to the
COLD WATER LINE. Saddle-type shutoff valves are
included in many water supply kits. Before purchasing,
make sure a saddle-type valve complies with your
local plumbing codes.

If the water pressure from the reverse osmosis system
is less than 21 PSI (1.5 kg.f/cm _, more than 4 sec to fill
a cup of 7 oz capacity):
• Check to see whether the sediment filter in the reverse
osmosis system is blocked. Replace the filter if
necessary.
• Allow the storage tank on the reverse osmosis system
to refill after heavy usage.
• If the issue about water pressure from reverse osmosis
remains, call a licensed, qualified plumber.
12

iNSTALLATiON

iNSTRUCTiONS

5. TIGHTEN

Install the shutoff valve on the nearest frequently used
drinking water line.

THE PIPE CLAMP

Tighten the clamp screws until the sealing washer
begins to swell.
NOTE: Do not overtighten

1. SHUT OFF THE MAIN WATER SUPPLY

or you may crush the tubing.

Turn on the nearest faucet to relieve the pressure on
the line.

2. CHOOSE

THE VALVE LOCATION

Pipe Ctamp _

Clamp Screw!_

IWnlethErnd

Choose a location for the valve that
is easily accessible. It is best to connect
into the side of a vertical water pipe.
When it is necessary to connect into a
horizontal water pipe, make the
connection to the top or side, rather
than at the bottom, to avoid drawing
off any sediment from the water pipe.
=

6. ROUTE THE TUBING
Route the tubing between the cold water line and the
refrigerator.

DRILL THE HOLE FOR THE VALVE
Drill a 1¼,(6.35 mm) hole in thewater
pipe using a sharp bit.
Remove any burrs
resulting from drilling the
hole in the pipe. Take care
not to allow water to drain
into the drill. Failure to drill a

Route the tubing through a hole drilled in the wall or
floor (behind the refrigerator or adjacent base
cabinet) as close to the wall as possible.
NOTE: Be sure there is sufficient extra tubing [about
8 feet (2.4 m) coiled into 3 turns of about
10" (254 mm) diameter] to allow the refrigerator to
move out from the wall after installation.

1¼"(6.35 mm) hole may result in reduced ice
production or smaller cubes.

7. CONNECT

NOTE: Licensed plumbers must use only cooper tubing
NDA tubing #49595 or 49499 or Cross Link
Polyethylene (PEX) tubing.

4. FASTEN

THE SHUTOFF

THE TUBING

TO THE VALVE

Place the compression nut and ferrule (sleeve)
for copper tubing onto the end of the tubing and
connect it to the shutoff valve. Make sure the tubing
is fully inserted into the valve. Tighten the
compression nut securely.

VALVE

Fasten the shutoff valve to the cold water pipe with
the pipe clamp.

Saddle-Type

Compression

Shutoff Va_e_
Pipe Clamp

Saddle-Type --J
Shutoff Valve

Packing
Nut
Outlet
Valve

Vertical Cold
Water Pipe

Ferrule (sleeve)

NOTE: Commonwealth of Massachusetts Plumbing
Codes 248CMR shall be adhered to. Saddle

valves are illegal and use is not permitted in
Massachusetts. Consult with your licensed
plumber.

FLUSH

OUT THE TUBING

Back of refrigerator

Turn the main water supply on
and flush out the tubing until the
water is clear.
Shut the water off at the water
valve after about one quart of
water has been flushed through
the tubing.

9. CONNECT THE TUBING
REFRIGERATOR

W' (6.35 mm) Tubing
Tubing

_ _'_ ),4
1/4" (6,35 mm)
Compression
Nut

TO THE

Ferrule

NOTES:
Before making the connection to the refrigerator, be
sure the refrigerator power cord is not plugged into
the wall outlet.

Figure

Fasten the tubing into the tubing clamp attached to the
back of the refrigerator.
First, loosen the screw fastening the clamp. Next,
insert the tubing in the groove. Finally, re-fasten the
screw,

• If your refrigerator does not have a water filter,
we recommend installing one. If your water supply
has sand or particles that could clog the screen of
the refrigerator's water valve, install the filter in the
water line near the refrigerator
• Do not use old hoses; only use new hoses provided
by the manufacturer. For more information call
1-800-4-MY-HOME ®.

10. PLUG IN THE REFRIGERATOR
Arrange the coil of tubing so
that it does not vibrate against
the back of the refrigerator or
against the wall. Push the
refrigerator back to the wall.

1. Remove the plastic flexible cap from the refrigerator
connection.
,

Refrigerator
Connection

Place the compression nut and ferrule (sleeve) onto
the end of the tubing. (See figure 1)
Insert the end of the tubing into the connection as
far as possible. While holding the tubing, tighten the
fitting.

11. START
CAUTION: Check to make sure that leaks are not
occurring in the water line.

THE ICEiVIAKER

Set the icemaker power switch to the ON (I) position
The icemaker will not begin to operate until it
reaches its operating temperature of 15°F (-9°C)
or below. It will then begin operation automatically if
the icemaker power switch is in the ON (I) position,

Use this page to become more familiar with the parts and features.
Note: This guide covers several different models.The refrigerator you have purchased may have some or
all of the items listed below, The locations of the features shown below may not match your model,

@ Refrigerator Light (LED)
@ Dairy Corner

Automatic Icemaker
The ice is produced in the icemaker
and sent to the dispenser.

Freezer Shelf

Freezer Light (LED)

Freezer Door Rack (Plastic/Wire)

Drawer

Base Grille

For storage of dairy products
such as butter and cheese,

0 Water Filter
@ Refrigerator Shelf
@ Snack Pan
@ Refrigerator Door Rack
For storage

of meat or fresh food.

Door racks may be clear or opaque
refrigerator
model type.

@ Crisper
15

Drawer

depending

ENSURING

PROPER AiR CiRCULATiON

PRIOR TO USE

In order to ensure proper temperatures, air must flow
between the refrigerator and freezer sections.

1. Clean your refrigerator thoroughly and wipe off dust
accumulated during shipping.
2. Install accessories such as ice cube bin, drawers,
shelves, etc., in their proper places. They are packed
together to prevent possible damage during shipment.
3. Let your refrigerator run for at least 2 or 3 hours
before putting food in it. Check the flow of cold air in
the freezer compartment to ensure proper cooling.
Your refrigerator is now ready for use.

o Cool air enters the freezer though the vents located at
the top of the compartment and exits through the vents
located behind the freezer drawers.
o Cool air from the freezer section enters the fresh food
section through vents located at the top of the
compartment. The air moves down throughout the
compartment and exits through the vents located behind
the crisper drawers.

CONTROL

PANEL FEATURES

(identify your Control type)
Press the button for the desired function to review and
select other settings.
Type 1

Type 2

" Do not block any of these vents with food packages.
If the vents are blocked, airflow will be interrupted and
temperature and moisture problems may occur.
iMPORTANT:
Because air circulates between both sections, any odors
formed in one section will transfer to the other. You must
thoroughly clean both sections to eliminate odors.
To prevent odor transfer and dried out food, wrap or cover
foods tightly. (See the Food Storage Guide section for
details.)

REFRIGERATOR

AND FREEZER

CONTROLS

It is recommended to mantain the temperature of 37°F
(3°C) in the refrigerator compartment and 0°F (-18°C)in
the freezer compartment. To adjust temperatures press,
for refrigerator compartment the Refrigerator Temp graphic
and for freezer compartment the Freezer Temp graphic.
The lower the number, the colder the compartment will be.

NOTE: If you
close the
refrigerator door,
you may see the
freezer door
open and close
again due to
pressure from
internal air flow.

NOTE: The refrigerator temperature can be modified from
33°F to 46°F (0°C to 8°C). The freezer
temperature can be modified from -6°F to 8°F
(-21°C to -13°C).
To change temperature unit from Fahrenheit to Celsius
or from Celsius to Fahrenheit press and hold Refrigerator
Temp and Freezer Temp buttons.
16

DisplayOff Mode

iCE & WATER
(identify your icon type)

• When the refrigerator is in the Display Off Mode, the
display will remain off until a door is opened or a button is
pressed. Once on, the display will remain on for 20
seconds.
• To deactivate the Display Off Mode, press and hold the
Freezer Temp and Ultra Ice buttons for 5 seconds until
the tone sounds. Repeat this procedure to reactivate the
Display Off Mode.

Type

Type 2

You can select water or ice.
• Select Water, Crushed Ice or Cubed Ice by pressing
the ICE & WATER button to the selection desired. The
Water, Crushed Ice or Cubed Ice icon will light up to
indicate selection.
=_

Icemaker

Operation

Selecting this icon indicates that cubed ice will be
dispensed when the dispenser pad is activated.
Selecting this icon indicates that water will be
dispensed when the dispenser pad is activated.

Personal

Injury

Hazard

Selecting this icon indicates that crushed ice will
be dispensed when the dispenser pad is activated.

Avoid contact with the moving parts of the ejector
mechanism, or with the heating element that releases
the cubes. DO NOT place fingers or hands on the
automatic icemaking mechanism while the refrigerator
is plugged in.

To dispense water or ice, gently push your cup against
the dispenser pad.
NOTE: Hold your cup in place for a couple of seconds
after dispensing ice or water so the last few drops
go in your cup instead of on the floor.

A newly=installed
refrigerator
may take
12 to 24 hours to begin making ice.

ULTRA iCE

Indicator Light
Type 1

Type

Press this button once to activate the increased ice making
function. The Ultra Ice icon on the display panel will
illuminate when activated. The Ultra Ice function runs the
freezer compartment at the coldest settings for a 24 hour
period to increase ice making. Press the button again to
cancel the Ultra Ice function.
S h utoff Arm
Ice Cube size
selector button

Power Switch

FILTER RESET
HOLD

The icemaker will produce 6 cubes per cycle,
approximately 100 cubes in a 24 hour period, depending
on freezer compartment temperature, room temperature,
number of door openings and other operating conditions.

3SEC

Type 1

HOLD

3SEC

Type 2

There is an indicator light for the water filter cartridge on
the dispenser that will blink to indicate it is time to change
the water filter. Water filters usually need to be replaced
once every six months. After,_[eplacing the filter, press and

If the refrigerator is used before the water connection is
made to the icemaker, set the power switch to OFF (O),
Throw away the first few batches of ice to allow the
water line to clear.

hold the Filter Reset button _
turn off the filter status light
................

Be sure nothing interferes with the sweep of the shutoff
arm.
When the bin fills to the level of the shutoff arm, the
icemaker will stop producing ice.
It is normal for several cubes to be stuck together
If ice is not used frequently, old ice cubes will become
cloudy, taste stale, and shrink.

or _

for 3 seconds to

DOOR
_

CONTROL

CONTROL
LOCK
HOLD 3 SEC

Type 1

HOLD

ADJUSTING

ALARM

SETTINGS

Give the refrigerator time to cool down completely
before making final adjustments. It is best to wait 24
hours before doing this. The initial settings mentioned in
CONTROL PANEL FEATURES section should be
correct for normal household refrigerator use.
The refrigerator control functions as the thermostat for
the entire appliance (refrigerator and freezer sections).
The colder the setting, the longer the compressor will
run to keep the temperature colder. The freezer control
adjusts the cold air flow from the freezer to the
refrigerator. Setting the freezer control to a lower
temperature keeps more cold air in the freezer
compartment to make it colder.
If you need to adjust temperatures in the refrigerator or
freezer, start by adjusting the refrigerator and allow 24
hours for the temperature to stabilize. If it is too warm or
too cold, then adjust the freezer control.

LOCK
3 SEC

Type

CONTROL

When either the refrigerator or freezer door is left open for
more than 1 minute, an alarm will sound to let you know
the door is open. The alarm will repeat every 30 seconds
until all doors are completely closed. The door alarm
function can be deactivated by pressing the Door Alarm
button.
CONTROL LOCK
This model is equipped with a control lock function that
disables the temperature controls and dispenser pad. To
activate the Control Lock, press and hold the Door Alarm
button for 3 seconds until the Control Lock indicator turns
on. Repeat this procedure to disable the Control Lock.
NOTE: When the Control Lock is enabled, the dispenser
pad and all other buttons are disabled.

Use the settings listed in the chart below as a guide.
Always remember to wait at least 24 hours between
adjustments.

DISPENSER LIGHT
Type 1

CONDITION/REASON :

Type 2

These models are equipped with a light that illuminates the
dispenser area whenever the dispenser pad is engaged.
Type 1
This model is equipped with a Mood Lamp that illuminates
the dispenser area.
m
The Mood Lamp can be turned on by pressing the
button.
When the Dispenser Light is enabled, an indicator located
above the Dispenser Light button will illuminate.
Type 2
This model is equipped with a Mood lamp that illuminates
the dispenser area. The Mood lamp can be turned on,
off or set in Auto function by pressing the
button.
When Auto function is set, brightness of
the room will be detected by the Light
Sensor to turn on when dark and off
when bright.

RECOMMENDED
ADJUSTMENT :

II REFRIGERATOR section too
warm
- Door opened often
- Large amount of food added
- Room temperature very warm

Set the Refrigerator
control one degree
colder; wait 24 hours
for the new setting to
take full effect before
making another
adjustment.

II FREEZER section too
warm/ice not made fast enough
- Door opened often
- Large amount of food added
-Very cold [below 55°F (13°C)]
room temperature.
(Compressor does not cycle
often enough).
- Heavy ice usage
-Air vents blocked by items

Set the Freezer control
one degree colder;
wait 24 hours for the
new setting to take full
effect before making
another adjustment.

Move items out of
airstream

II REFRIGERATOR
cold

section too Set the Refrigerator
control one degree
warmer; wait 24 hours
-Controls not set correctly for
for the new setting to
your conditions
take full effect before
making another
adjustment.
II FREEZER section too cold
-Controls not set correctly for
your conditions

Set the Freezer control
one degree warmer;
wait 24 hours for the
new setting to take full
effect before making
another adjustment.

FOOD STORAGE

GUIDE

STORING

Butter or
margarine

Cheese

Milk

Eggs

Fruit

Leafy
vegetables

Packaging
Successful freezing depends on correct packaging.
When you close and seal the package, it must not allow
air or moisture in or out. If it does, you could have food
odor and taste transfer throughout the refrigerator and also
dry out frozen food.

How t o Store
I_ Keep opened butter in a covered
dish or closed compartment.
When storing an extra supply,
wrap in freezer packaging and
freeze.

Packaging recommendations:
•
•
•
•
•
•

Store in the original wrapping until
you are ready to use it. Once
opened, rewrap tightly in plastic
wrap or aluminum foil.
_- Wipe milk cartons. For best
storage, place milk on interior
shelf, not on door shelf.

Do not use
Store in original carton or on
interior shelf, not on door shelf.

•
•
•
•

Wash, let dry, and store in
refrigerator in plastic bags or in
the crisper. Do not wash or hull
berries until you are ready to use
them. Sort and keep berries in
their original container in a
crisper drawer, or store in a closed
and sealed paper bag on a
refrigerator shelf.

Bread wrappers
Containers without tight lids
Wax paper or wax-coated freezer wrap
Thin, semi-permeable wrap
CAUTION:
Do not keep beverage cans or plastic
food containers in the freezer compartment. They may
burst if they freeze.

Freezing
Your freezer will not quick-freeze any large quantity of
food. Do not put more unfrozen food into the freezer than
will freeze within 24 hours [no more than 2 to 3 Ibs of food
per cubic foot (0.9 to 1.35 kg per cubic meter) of freezer
space]. Leave enough space in the freezer for air to
circulate around packages. Be careful to leave enough
room at the front so the door can close tightly.

Remove store wrapping and trim
or tear off bruised and discolored
areas. Wash in cold water and

Food storage times will vary according to the quality and
type of food, the type of packaging or wrap used (airtight
and moisture-proof) and the storage temperature. Ice
crystals inside a sealed package are normal. This simply
means that moisture in the food and air inside the package
have condensed, creating ice crystals.

Vegetables with I_ Place in plastic bags or plastic
skins (carrots,
container and store in crisper
peppers)
drawer.
_ Use fresh fish and shellfish the
same day purchased.
Leftovers

Rigid plastic containers with "tight=fitting lids"
Straight-sided canning/freezing jars
Heavy=duty aluminum foil
Plastic-coated paper
Non=permeable plastic wraps
Specified freezer-grade self-sealing plastic bags

Follow package or container instructions for proper
freezing methods.

drain. Place in plastic bag or
plastic container and store in
crisper drawer.

Fish

FOOD

NOTE: For further information about preparing food for
freezing or food storage times, check a freezer
guide or a reliable cookbook.

Wrap or store food in the refrigerator in airtight and
moisture-proof material unless otherwise noted. This
prevents food odor and taste transfer throughout the
refrigerator. For dated products, check date code to ensure
freshness.
items

FROZEN

NOTE: Allow hot foods to cool at room temperature for
30 minutes, then package and freeze. Cooling hot
foods before freezing saves energy.

Cover leftovers with plastic wrap
or aluminum foil. Plastic containers
with tight lids can also be used.

WARNING

WATER AND ICE DISPENSER

Do not put your hands into the water and ice dispenser
opening. Doing so may cause an injury to your hand.

Your refrigerator has a mechanism that can dispense cool
water and ice cubes without opening the door.
• The dispenser tray can easily be removed by pressing
down and lifting it out.
• First push the tray in the area labeled 'PUSH', then place
your finger in the center hole and lift up to remove the
tray.

CAUTION
When using the dispenser with a container with a
small opening, place the container as close to the top
as possible.
• The dispenser opening has the following dimensions:
Depth
4 Vs" (124 mm)
Width
8 Vs" (220 mm)
Height
10 Yl0"(277 mm)
For best performance, use a container that is smaller
than the dispenser opening.

iCE STORAGE

BiN

CRISPER

The ice bin stores the ice cubes made by the icemaker.
If you need to remove the ice storage bin, do so as follows:

AND CRISPER

COVER

The crisper allows for better conservation of fruits and
vegetables.

NOTE: Use both hands to remove the ice bin to avoid
dropping it.

• To remove the crisper compartment cover, pull out
the crisper compartment a bit to the front @, lift the
front part of the cover as shown in ®, and take it out @.

• Lift the ice storage bin slightly @ and pull it out ® as
shown in the figure.

• To remove the crisper compartment, pull the crisper
compartment to the front (b until it stops. Then slightly
lift the crisper compartment ® while pulling it out @.

DOOR RACK AND SUPPORT
Your refrigerator and freezer features racks which can
easily be arranged for packaged products.
• Lift the door rack holding both sides (b and pull it out in
® direction.

CAUTION

SNACKPAN

When removing the crisper compartment you will see
the water tank. Do not remove it, or water leakage
may result. The water tank is not a removable part.

• To remove the snack pan cover, pull the snack pan
out a bit @. Lift the front part of the snack pan cover and
pull out ®.

REFRIGERATOR

Youcancontroltheamountof humidityinthemoisturesealedcrispers.Adjustthecontrolto anysetting
between"VEGETABLES"
and"FRUIT".
• "VEGETABLES":
• "FRUIT":

COVER

The refrigerator compartment shelf is adjustable so that
you can place it at a height according to the space
requirement of foods.

Keeps moist air in the crisper for best
storage of fresh, leafy vegetables.

Lets moist air out of crisper for best storage of
fruits or vegetables with skins.

AIRTIGHT

CRISPER
(on

some

AND

AIRTIGHT

SHELVES

• Slide shelf
Pull the shelf towards you @, then lift both the front and
rear parts of the shelf upward ® to remove @.

CRISPER

models)

NOTE: Make sure to keep shelf horizontal while removing;
otherwise it may drop.

Ideal to store lettuce, spinach, broccoli, brussels sprouts,
celery or any vegetable or fruit that require cold, moist
conditions. The airtight crisper will keep vegetables fresh
for longer.

• Folding Shelf (on some models)
You can store taller items such as gallon containers or
bottles by simply sliding the shelf back.
Slightly lift the shelf in the direction @ while pushing it
to the back ®.

• To remove it, pull the airtight crisper cover out, insert a
flatblade screwdriver below the airtight cover hook @ and
pull down ®. Repeat same process on the opposite side.

• Fixed shelf
Lightly lift up the front part of shelf @, pull the shelf
towards you @, then take it out while lifting the rear part
of shelf @.

• Fixed shelf
1. Firmly pull the right rear of the shelf up @ to clear the
rear shelf support (view detail).

@
FREEZER

SHELF

To assemble or disassemble the freezer shelf, follow
the next steps:

2. Firmly pull the right front part of the shelf up ® to clear
the front shelf support.
J
1. Pull the shelf towards the front d). The shelf hook will
contact the support on the guide. Lift the shelf so the
hook clears the guide support (view detail) and pull out.
B

3. Tilt the shelf in the direction ®, and then pull it toward
you.

WATERFILTER

Grasping filter by its handle, twist it about 1/4turn until it
clicks into place. The filter is not correctly installed if you
can wiggle it from side to side. You will hear a snap when
it locks securely into place.

WhentheFilterReseticonturnson,youhavetochange
thewaterfilter.Pressthe FilterResetbutton:,A_,
_ _..........
for3 secondstoturntheiconoff.
Type

Before removing

Type

or installing water filter:

iMPORTANT: Turn off household water supply.
Removing

the water filter.

Rotate the knob of the cartridge counterclockwise. When
the cartridge is removed, you will feel it click out of place.
Pull out the cartridge.

NOTE: Removing the filter causes a small amount of
water to flow out. Place a cup below the filter
receptacle to catch water. Holding the cartridge
with the handle down will minimize spillage.

After installing water filter:
1. Turn on household water supply.
2. Dispense 2.5 gallons (9.46 liters) of water to purge the
system, depressing and releasing the dispenser pad in
cycles of 30 seconds ON and 60 seconds OFF. Open
the refrigerator door and shelf area to check for water
leaks.
To purchase replacement water filter, call
1-800-4-MY-HOME ®.

installing

the water filter.

Take the new cartridge out of its package and remove
protective receptacle from the o-rings. With cartridge knob
in the vertical position, push the new filter cartridge into
the cover until it stops.

Filter Performance Data Sheet
Nlodel Number 5231JA2006E
Use with

replacement

cartridge

5231JA2006E

This system has been tested according to NSF/ANSI 42 for the reduction of the substances listed below.
The concentration of the indicated substances in water entering the system was reduced to a
concentration less than equal to the permissible limit for water leaving the system, as specified in
NSF/ANSl 42.

ystem tested
and certified
by NSF
NSF/ANSI
reduction
of Chlorine,
Taste and
OdorInternational
and Nominalagainst
Particulate
Class Standard
III.

Influent Challenge
concentration. Units
apply to each row

Product
Water

Average %
Reduction

NSF Reduction
Requirements

5600000

At least 10 000
particles/ml

833333

93.2

> 85%

1.9 mg/L

2.0 mg/L + 10%

0.05 mg/L

97.4

>50%

Contaminant
Reduction

Average
Influent

Particulate
Class I Particle size:
>0.5 to <1 ,m
Chlorine taste and odor

42 for the

Max.
Effluent

Min. %
Reduction

NSF
Test

470000

91.6%

511032-03

0.05 mg/L

97.4%

511031-03

mg/L

To a capacity of 300 gallons (1.135 L).
* Note that while the testing was performed under standard labaratory conditions, actual performance may vary.

Application

_3CAUTION

Guidelines / Water Supply Parameters

Water pressure

30 - 100 psi !207 - 689 kPa)

Water temperature
Service flow

33°F - 100°F (0.6°C - 37.8°C)
0.5 gpm (1.9 Ipm)

To reduce the risk associated with ingestion
of contaminants due to use with water that is
microbiologically unsafe or of unknown
quality.
Do not use with water that is
microbiologically unsafe or of unknown
quality without adequate disinfection before
or after the system.
Systems must be installed and operated in
accordance with manufacturer's recommended
procedures and guidelines.

To reduce the risk of property damage due to water leakage:
• Read and follow Use instructions before installation and use of
this system.
• Install on COLD water lines only.
• Company with all state and local plumbing codes.
Never install or operate where inlet water pressure may exceed
125 psi (862 kPa).
• Protect filter from freezing. Remove filter in temperatures
below 34°F (1 °C).
• Replace cartridge at specified service interval. Cartridge
MUST be replaced at least every 6 months.
• After replacing the water filter cartridge, dispense 2.5 gallons
(9.46 liters) of water to purge the system, depressing and
releasing the dispenser pad in cycles of 30 seconds ON and
60 seconds OFF. Discard the purged water.

To purchase a replacement filter, visit your local Sears store or
call 1-800-4-MYHOME ®.Visit us on the web at www.sears.com

Product distributed in the United States
by Sears Brands Management Corporation,
Hoffman Estates, IL 60179

DOOR

LINERS AND GASKETS

Do not use cleaning waxes, concentrated detergent,
bleaches, or cleaners containing petroleum on plastic
refrigerator parts.
Use a clean sponge or soft cloth and a mild detergent in
warm water. Wash, rinse and dry all surfaces thoroughly.

PLASTIC

ExplosionHazard
Usenon-flammable
cleaner.

Both the refrigerator and freezer sections defrost
automatically. However, clean both sections about once a
month to prevent odors. Wipe up spills immediately.

CLEANING

BACK COVER

TIPS
ELECTRICAL

o Unplug refrigerator or disconnect power.
o Remove all removable parts, such as shelves,
crispers, etc. Refer to sections in Using Your
Refrigerator for removal instructions.
o Use a clean sponge or soft cloth and a mild detergent
in warm water. Do not use abrasive or harsh cleaners.

NOTE: Back cover should only be removed by a qualified
technician.

o Plug in refrigerator or reconnect power.

Clean the vents on the
back cover. Use a vacuum
cleaner with the brush
attachment, at least twice a
year to keep your refrigerator
working efficiently.

OUTSIDE
Waxing external painted metal surfaces helps provide
rust protection. Do not wax plastic parts. Wax painted
metal surfaces at least twice a year using appliance wax
(or auto paste wax). Apply wax with a clean, soft cloth.
Do not use wax on stainless steel exteriors. Use a product
specially designed for polishing stainless steel appliances,
or clean with a soft cloth or clean sponge and a mild
detergent dissolved in warm water. Dry thoroughly with a
soft cloth.

LIGHT (LED) REPLACEMENT
If refrigerator or freezer LED stops working, please call
1-800-4-MY-HOME ®for service.
NOTE: Do not remove the LED, it is only to be removed
by a qualified technician.

NOTE: Avoid door surface contact with chemical products
that contain Phosphate or Chlorine, such as
degreasers, detergents (containing TSP) and
bleachers.

freezer

SHOCK HAZARD

Before you begin, either unplug the refrigerator or
turn off power at the circuit breaker or fuse box.
Failure to do so could result in death or serious injury.

o Hand wash, rinse and dry all surfaces thoroughly.

INSIDE WALLS (allow
cloth will not stick)

and panels)

Do not use window sprays, abrasive cleaners, or
flammable fluids. These can scratch or damage the
material. Use a clean sponge or soft cloth and a mild
detergent in warm water. Wash, rinse and dry all
surfaces thoroughly.

Failure to do so can result in death, explosion, or fire.

GENERAL

PARTS (covers

POWER

to warm up so

INTERRUPTIONS

1. If the power will be out for 24 hours or less, keep all
refrigerator doors closed to help foods stay cold and
frozen.

To help remove odors, you can wash the inside of the
refrigerator with a mixture of baking soda and warm water.
Mix 2 tablespoons baking soda to 1 quart of water (26 g
soda to 1 liter water.) Be sure the baking soda is
completely dissolved so it does not scratch the surfaces of
the refrigerator.

2. If the power will be out for more than 24 hours, remove
all the frozen food and store it in a frozen food locker.

WHEN YOU GO ON VACATION

WHEN YOU SHOULD SET THE ICEMAKER
POWER SWITCH TO OFF (O)

If you choose to leave the refrigerator running while
you are away, follow these steps to prepare your
refrigerator before you leave.
1. Use up any perishables and freeze other items.
2. Empty the ice bin.
3. Turn OFF the Icemaker. NOTE: If the ambient
temperature will drop below freezing, have a qualified
service technician drain the water supply system (on
some models) to prevent serious property damage
due to possible flooding from ruptured water lines or
connections.

• When the
• When the
minute or
• When the

NORMAL

water supply will be shut off for several hours.
ice storage bin is removed for more than a
two.
refrigerator will not be used for several days.

SOUNDS

YOU MAY HEAR

• The icemaker water valve will buzz as the icemaker
fills with water. If the power switch is in the ON (I)
position, it will buzz even if it has not yet been hooked
up to water. To stop the buzzing, move the power switch
to OFF (O) position.

If you choose to unplug your refrigerator before you
leave, follow these steps.
1. Remove all food from the refrigerator and empty ice
bin.
2. Unplug refrigerator.
3. Clean refrigerator, wipe, and dry well.
4. Tape rubber or wood blocks to the tops of both doors
to prop them open far enough for air to get in. This
stops odor and mold from building up.

NOTE: Keeping the power switch in the ON (I) position
before the water line is connected can damage
the icemaker.
• You will hear the sound of cubes dropping into the bin
and water running in the pipes as the icemaker refills.

WHEN YOU MOVE
When you are moving your refrigerator to a new home,
follow these steps to prepare it for the move.
1. Remove all food from the refrigerator and pack all
frozen food in dry ice.
2. Unplug refrigerator.
3. Clean refrigerator, wipe, and dry well.
4. Empty water from the defrost pan.
5. Clean, wipe and dry thoroughly.
6. Take out all removable parts, wrap them well and
tape together so they do not shift and rattle during the
move. Refer to sections in Using your Refrigerator for
removal instructions.
7. Depending on the model, raise the front of the
refrigerator so it rolls more easily OR screw in the
leveling legs all the way so they don not scrape the
floor. See the DOOR ALIGNMENT section.
8. Tape the doors shut and tape the power cord to the
refrigerator cabinet.
9. If the ambient temperature will drop below freezing,
have a qualified service technician drain the water
supply system (on some models) to prevent serious
property damage due to possible flooding from ruptured
water lines or connections.
When you get to your new home, put everything back
and refer to the REFRIGERATION INSTALLATION
section for setup instructions.

UNDERSTANDING
HEAR

SOUNDS

YOU MAY

The defrost timer will click when the automatic defrost
cycle begins and ends. The thermostat control (or
refrigerator control, depending on the model) will also
click when cycling on and off.

Your new refrigerator may make sounds that your old
one did not make. Because the sounds are new to you,
you might be concerned about them. Most of the new
sounds are normal. Hard surfaces, like the floor, walls and
cabinets, can make the sounds seem louder than they
actually are. The following list describes the kinds of
sounds and what may be making them.

Rattling noises may come from the flow of refrigerant,
the water line, or items stored on top of the refrigerator
Your refrigerator is designed to run more efficiently to
keep your food items at the desired temperature.
The high efficiency compressor may cause your new
refrigerator to run longer than your old one, but it is still
more energy efficient than previous models. While
running you may hear a pulsating or high-pitched sound.
You may hear the evaporator fan motor circulating the air
through the refrigerator and freezer compartments.
each cycle ends, you may hear a gurgling sound due
to the refrigerant flowing in your refrigerator.
Contraction and expansion of the inside walls may cause
a popping noise.
Water dripping on the defrost heater during a defrost
cycle may cause a sizzling sound.
You may hear air being forced over the condenser by the
condenser fan.
You may hear water running into the drain pan during the
defrost cycle.

REFRIGERATOR

DOES NOT OPERATE

Check if...

Then...

The power supply cord is unplugged.

Firmly plug the cord into a live outlet with proper voltage.

A household fuse has blown or circuit breaker tripped.

Replace the fuse or reset the circuit breaker.
Check that the house circuit is not overloaded.

Refrigerator is in the defrost cycle.

Wait about 30 minutes for defrost cycle to end.

Display shows the word OFF. (Identify your control type).

The refrigerator control has been put into the store Demo
(Demonstration) Mode.
The Demo Mode disables the cooling system, but the
compartment lights continue to turn on and the control
panel also displays normally.
To disable Demo Mode open refrigerator door, then press
Ultra Ice and Refrigerator Temp buttons at the same time
for 5 seconds. When Demo Mode is deactivated, your
temperature setting will be displayed.

VIBRATION

OR RATTLING

NOISE
Then,,,

Check if...

Floor is weak or uneven or leveling legs need adjusting.
See DOOR ALIGNMENT section.

The floor.
refrigerator is not resting solidly on
the

LIGHTS

DO NOT WORK

Check if...

Then...

The power supply cord is unplugged.

Firmly plug the cord into a live outlet with proper voltage.

LED light failure.

not remove

the

qualified technician.
28

LED light, it is only to

be removed

by a

COMPRESSOR

MOTOR SEEMS TO RUN TOO MUCH
Then...

Check if...
The refrigerator that was replaced was an older model.

Modern refrigerators with more storage space require
more operating time. Even though this refrigerator may
run more than your older one, it will still use less energy.

The room temperature is hotter than normal.

The motor will run longer under warm conditions. At
normal room temperatures, expect your motor to run
about 40% to 80% of the time. Under warmer conditions,
expect it to run even more often. These model is still more
energy efficient than previous models.

The door is opened often or a large amount of food has
just been added.

Adding food and opening the door warms the refrigerator.
It is normal for the refrigerator to run longer in order to
cool the refrigerator back down. In order to conserve
energy, try to get everything you need out of the
refrigerator at once, keep food organized so it is easy to
find and close the door as soon as the food is removed.
See the FOOD STORAGE GUIDE section.

The refrigerator was recently plugged in and the
refrigerator control was set correctly

The refrigerator will take up to 24 hours to cool
completely.

The refrigerator control was not set correctly for the
surrounding conditions.

See the ADJUSTING

The doors are not closed completely.

Push the doors firmly shut. If they will not shut all the
way, see Doors Will Not Close Completely below.

The condenser coils are dirty.

This prevents air transfer and makes the motor work
harder. Clean the condenser coils. Refer to the CARE
AND CLEANING section.

DOORS

WILL

NOT

CONTROL SETTINGS section.

COMPLETELY

Check if...

Then...

The refrigerator is not level.

See DOOR ALIGNMENT in the REFRIGERATION
INSTALLATION section to level refrigerator.

Food packages are blocking the door open.

Rearrange food containers to clear door and door
shelves.

The ice bin, crisper cover, pans, shelves, door bins
or baskets are out of position,

Push bins all the way in and put crisper cover, pans,
shelves and baskets into their correct positions. See the
USING YOUR REFRIGERATOR section.

The gaskets are sticking.

Clean gaskets and the surfaces that they touch. Rub a
thin coat of paraffin wax on the gaskets after cleaning.

The doors were removed during product installation
and not properly replaced.

THE ICEMAKER

IS NOT PRODUCING

Remove and replace the doors according to the
REMOVING AND REPLACING REFRIGERATOR
DOORS section, or call a qualified technician.

ICE OR ICE CUBES ARE FREEZING

Check if...

TOO SLOWLY

Then...

The freezer temperature is cold enough to produce ice.

Wait 24 hours after hook-up for ice production. See the
CONTROL PANEL FEATURES section.

Door left open.

Check to see if something is holding the door open.
29

CUBES

PRODUCED

BY ICEMAKER

ARE TOO SMALL

Check if...

Then...

Water shutoff valve connecting refrigerator to water line
may be clogged or water pressure may be too low.

Call a plumber to check the valve and water supply.

Smaller cube size is selected,

Select larger cube size using the Ice Cube Size selector
button.

THE DOORS ARE DIFFICULT

TO OPEN
Then...

Check if...
The gaskets are dirty or sticky,

Clean gaskets and the surfaces that they touch. Rub a
thin coat of appliance polish or paraffin wax on the
gaskets after cleaning

The door is reopened within a short time after having
been opened.

When you open the door, warmer air enters the
refrigerator. As the warm air cools, it can create a vacuum.
If the door is hard to open, wait 5 minutes to allow the air
pressure to equalize, then see if it opens more easily.

TEMPERATURE

IS TOO WARM OR THERE

IS INTERIOR

Check if...

MOISTURE

BUILDUP

Then...

The air vents are blocked. Cold air circulates from the
freezer to the fresh food section and back again through
air vents in the wall dividing the two sections.

Locate air vents by using your hand to sense airflow and
move all packages that block vents and restrict airflow.
Refer to ENSURING PROPER AIR CIRCULATION
section for the location of air vents.

The doors are opened often.

When the door is opened, warm humid air is allowed into
the refrigerator. The more the door is opened, the faster
the humidity builds up, and the more warm air the
refrigerator must cool. In order to keep the refrigerator
cool, try to get everything you need out of the
refrigerator at once, keep food organized so it is easy to
find and close the door as soon as the food is removed.

The control is not set correctly for the surrounding
conditions.

Refer to the CONTROL PANEL FEATURES section.
Wait 24 hours for temperatures to stabilize or even out.
If the temperature is too cold or too warm, adjust the
setting one temperature at a time.

A large amount of food has just been added to the
refrigerator or freezer,

Adding food warms the refrigerator. It can take a few
hours for the refrigerator to return to normal temperature.

The food is not packaged correctly.

Wrap food tightly and wipe off damp containers prior to
storing in the refrigerator to avoid moisture accumulation.
If necessary, repackage food according to the guidelines
in the FOOD STORAGE GUmDE section.

The doors are not closing completely

See Doors Will Not Close Completely.

The weather is humid.

In humid weather, air carries moisture into refrigerator
when doors are opened.

A self-defrost cycle was completed.

It is normal for droplets to form on the back wall after the
refrigerator self-defrosts.
30

FROST OR ICE CRYSTALS

ON FROZEN

FOOD

Check if...

Then...

The door is not closing properly

See Doors Will Not Close Completely,

The door is opened often.

When the door is opened, warm, humid air is allowed in
the freezer resulting in frost.

FROZEN
FOOD
Check if...

IN REFRIGERATOR

refer to page 29.

COMPARTMENT
Then...

The temperature control in the refrigerator compartment
is set too cold.

Press the Refrigerator Temp button to set the refrigerator
compartment to a warmer temperature.

Refrigerator is installed in a cold location.

When room temperature is below 41 °F (5°C), food can
become frozen. The refrigerator should not be operated
in temperatures

Food with a high water content was placed too close to
the air vents,

below 55°F (13°C).

Place food with a high water content toward the front of
the refrigerator.

iCE HAS BAD TASTE OR ODOR
Check if...

Then...

The icemaker was recently installed,

Discard first few batches of ice to avoid discolored or
off-flavored ice.

The ice has been stored for too long,

Throw away old ice and make new supply,

The food has not been wrapped tightly in either
compartment,

Rewrap foods since odors may migrate to the ice if food
is not wrapped properly,

The water supply contains minerals such as sulfur,

A new filter may need to be installed to eliminate taste
and odor problems,

The interior of refrigerator needs cleaning,

See CARE AND CLEANING section,

Ice storage bin needs cleaning,

Empty and wash bin. Discard old cubes,

THERE

iS WATER

iN THE DEFROST

DRAIN PAN

Check if...

Then...

The refrigerator is defrosting.

The water will evaporate. It is normal for water to drip
into the defrost pan.

It is more humid than normal.

Expect that the water in the defrost pan will take longer
to evaporate, This is normal when it is hot or humid,

THE REFRIGERATOR

SEEMS TO MAKE TOO MUCH

Check if...

NOISE

Then...

he sounds may be normal for your refrigerator,

Refer tosection,
HEAR
the UNDERSTANDING

SOUNDS YOU MAY

NOT DiSPENSiNG

iCE

Check if...

Then...

All the doors are not closed completely.

Ice will not dispense if any of the refrigerator doors are left
open,

The dispenser display is locked.

Press and hold the Door Alarm button for 3 seconds to
unlock the control panel and dispenser,

Ice is not selected on the dispenser.

The dispenser can be set for ice or water. Make certain
that the control panel is set for the proper operation.
Press the dispenser Ice & Water button on the control
panel to cycle through the ice and water options,

The ice dispenser is not used often.

Check the ice bin for ice cubes clumping/sticking together,
If they are, break up the ice cubes to allow for proper
operation.

Ice bin is not installed correctly.

Be sure to install the ice bin firmly into position,

New installation.

Wait 24 hours after icemaker installation for ice
production to begin, Wait 72 hours for full ice production,

Ice cubes are stuck in the delivery chute.

Use a plastic utensil to clear the delivery chute,

The ice dispenser is stalling while dispensing
"crushed" ice.

Change the ice button from "crushed" to "cubed".
If cubed ice dispenses correctly, depress the button for
"crushed" ice and begin dispensing again,

Icemaker power switch in the OFF (O) position,

Move the switch to the ON (I) position,

Water supply turned off or not connected,

See the CONNECTmNG THE WATER MNE section,

NOT DiSPENSiNG

WATER

Check if...

Then...

The dispener display is locked,

Press and hold the Door Alarm button for 3 seconds to
unlock the control panel and dispenser,

New installation,

Flush and fill the water system,

Refrigerator or freezer doors are not closed
properly,

Water will not dispense if any of the refrigerator doors are
left open,

Water supply turned off or not connected,

See the CONNECTmNG THE WATER MNE section,

The water pressure is less than 40 psi.

The water pressure to the home affects the flow from the
dispenser,

Home filter or reverse osmosis system is used.

This can decrease water pressure. It is recommended
not to connect the supply line to a reverse osmosis
system for optimal operation,

The dispenser is not set for water dispensing,

The dispenser can be set for ice or water. Make certain
that the control panel is set for the proper operation.
Press the dispenser button on the control panel to cycle
through the ice and water options,

Water filter needs to be changed,

The filter should be changed every 6 months or
more often depending on usage. The filter can
become blocked over time with foreign
particles and reduce the water pressure,

Your Home
For troubleshooting,

product manuals and expert advice:

managem ylife
www.managemylife.com

.................. For repair - in your home - of all major brand appliances,
lawn and garden equipment, orheating and cooling systems,
nomatterwhomadeit,
nomatterwhosold
it!
For the replacement
owner'smanualsthatyou

parts, accessories and
needtodo-it-yourself.

For Sears professional
installation of home appliances
and items like garage door openers and water heaters.

1-800-4-MY-HOME

® (1-s00-469-4663)

Call anytime,
day or night (U.S.A. and Canada)
www.sears.com
www.sears.ca

o,.,,.Ho,11,,
For,epai,ofcaw-initemslikevac,.,,.,ms,
lawne_,.,ip_ent,
and electronics,

call anytime

for the location

of your nearest

Sears Parts& RepairService Center
1"800"488"1222

To purchase

a protection

1 =800"827-6655

agreement

(U.S.A.)

1"800"469"4663

on a product

serviced

t-800=361=6665

by Sears:
(Canada)

® Registered Trademark /
Trademark of KCD IP, LLC in the United States, or Sears Brands, LLC in other countries
® Marca Registrada / TMMarca de Fabrica de KCD IP, LLC en Estados Unidos, o Sears Brands, LLC en otros paises
Mc Marque de commerce / MDMarque deposde de Sears Brands, LLC

iiiiiiiii

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 33
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 4, 0, 0, 13
Create Date                     : Thu May 20 04:25:54 2010
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

Kenmore Elite 795 5107 Users Manual

795.5107 to the manual b92d8214-ce77-4fc6-b15c-9eec4d32cbab

Navigation menu

Versions of this User Manual:

Views

Navigation