Kenwood USA 30633120 Repeater User Manual 60942

Download:
Mirror Download [FCC.gov]
Document ID	60942
Application ID	D5PY30gbwcXSyetakE1bLg==
Document Description	8
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.1kB (101244 bits)
Date Submitted	1999-09-28 00:00:00
Date Available	2000-02-11 00:00:00
Creation Date	2001-06-07 14:00:32
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-06-07 14:00:34
Document Title	60942.pdf
Document Author:	jsoscia

VHF FM REPEATER/ UHF FM REPEATEH
KENWOOD
TKR-740/ TKFI-84D__.
INSTRUCTION MANUAL—
ID: ALH30633120 _
2.1033tc)(3) MANUAL
s, as; . r uu-W tn,
05 08 07 OS 05 04 03 02 0100
THANK YOU!
We are gratetul you purchased this KENWOOD repeater,
We believe this easy-to-program repeater will be highly
elfectlve in yourcomlnunications system, and will keep
personnel operating at peak efficiency.
KENWOOD incorporates the latest in advanced
technology into all of our products. As a result, we feel
strongly that you Will be pleased with the quality and
teatures 01 this product.
FEATURES
. You can easily program channel data using tile KFG-47D
version 2.00 or later (optional) on a PC.
- Vou can recall 1 at 32 preset channels using eithera PF key or
the external control line '
- The Iirmware can be written to the Flash memory through an
external source.
- QTIDQT signalling can be pro rammed on each channel. lt
decodes up to to ditterent QT DQT tones at one time
- When using the KPG~47D version 2 00 or later (optional), RX
PLL lock voltage, RX inpul signal strength, TX PLL lock
voltage, TX output power, and the power supply voltage can be
monitored on a PC
- The lnlsrtace port can be used With extemal equipment, such
as a repeater controller.
- The repeater has multl-mode capability.
Wide: 30 kHz, 25 kHz/ Narrow: is kH1,12.5 kHz
Wide: 25 kHz/ Narrow: 125 kHz
- You can adlust the following functions lrom a PC:
- Squelch (Analog/ Rsst)
- Signalling Balance
. Digital Pager Balance
- Maximum Deviation
- Signalling Deviation (TD)
- QT Deviation
- DOT Deviation
0 CW Deviation
. Digital Pager Deviation
- Test Tone Deviatlofl
- Remote TA
. RF Power
- RX Audio Signal Output (RA)
- RX Detector Signal Output (RD)
- TX Audio Input (TA)
- Voting Tone Level
PRECAUTIONS
- Do not expose the unit to rain or moisture; to prevent lire or
electric shock.
(TKR-740)
(Tm-540)
- Do not open the unit under any circumstances; to av0id risk at
electric shock.
- Do not expose the unit to long periods ol direct sunlight. not
place it close to heating appliances
. Do not place the unit in excessively dusty and/or humid areas,
nor on unstable surtaces
a ll you detect an abnormal odor or smoke coming Irom the unit,
disconnect the powerIrom the unit immediately. Contact your
KENWOOD service center or dealer.
NOTICES TO THE USER
FCC WARNING
This equipment generates or uses radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless
the modifications are expressly approved in me inst/Lichen manual. The
user could lose the authority to operate this equipment if an
unautnafized change or modification is made.
WARNING:
0 GOVERNMENT LAWPROHIEITS THE OPERATION OF
UNLICENSED HAD/O TFIANSMITTERS WITHIN THE
TERRITORIES UNDER GOVERNMENT CONTROL.
0 ILLEGAL OPERATION IS PUNISHAELE BV FINE OF!
lMPFI/SDNMENT OFI BOTH.
0 REFER SERV/CE TO QUALIFIED TECHNICIANS ONLY
UNPACKING AND CHECKING EQUIPMENT
More: The rolluwrrrg unpacking lnfonnaiion rs for use by your KElvwooo
dealer, an authorized KENWOOD sen/lee iacrlrty, or me factory.
Carefully unpack the repeater. We recommend that you
identity the items listed in the following table before
discarding the packing material. It any items are missing
or have been damaged during shipment. Iile a claim with
the carrier immediately.
Front glass B102590-X4 1
Fuse (4 A) F064027-X5 t
Handles and screw set K01-0421-X5 1
Power cable assembly EGO-3344-X5 1
Lead wire with connector E31 -3228-X5 1
Square plug E59»0410—X5 1
Dressed screw NOB-0543)“ 1
Instruction manual BSZ-1136-XX 1 _]
INSTALLATION
' To install the handles onto the tram panel of the receiver,
align the handles with the holes on the tram panel, then
secure the handles using the supplied screws.
Please consult your dealer tor installing the repeater and
antenna.
MICROPHONE
Connect a KENWOOD optional microphone to the
MICROPHONE jack on the tront panel.
- H'flm ramfl
D (9 690 (500 @ o°o°o°o°o _, m U
D Q D (i 5°33??? @ © © © 39 D E
o e (700 (700 e 69 D
(D Speaker
(23 REF (reterence) indicator
Lights red when using an external reference
trequencyt Lights green when using the internal
reference frequency.
6) BUSY indicator
Lights green while a signal is being received.
(D TX (transmit) indicator
Lights red while transmitting.
@ POWER indicator
Lights green when power is applied.
© Display
Two, 7-segment digits display the channel number
or status.
I Hear Panel
a: mi mt
©_<°> @3%
s a (is o
®RXleack
Connect a RX antenna or a duplexer to this BNC
receptacle.
® TESTISPKR jack
Test input/output jack. Connect an external
speaker to this jack.
C3) REMT IIO jack
Connect an external remote controller to this jack
® CONTROL 110 jack
Connect an external programming device or
repeater controller to this DB»25 interiace.
REPEATER OPERATION
Nure: Please consult your dealer forprogrammirig the repeater
When power is applied to the unit. the POWER
indicator lights green.
Turn the VOLUME control clockwise until a click
sounds. to unmute the volume. Rotate to adiust the
volume. Turn the VOLUME control counterclockwise
fully to mute the volume.
The BUSY indicator lights green while receiving a
signal, and the TX indicator lights red while
transmitting.
i ""I if
<5 a o
(D Programmable Function keys
Press these keys to activate their programmable
functions.
TEST switch
Press to transmit an unmodulated signal With no
external microphone connected.
® VOLUME control
Turn clockwise until a click sounds, to unmute the
volume. Rotate to adjust the volume. Turn
counterclockwise fully to mute the volume.
(0 MICROPHONE iack
Connect a microphone to this B-pin modular jack.
© EXT.REF IN iack
Connect an external reference frequency (10 MHz,
-10 dBm or higher) to this BNC receptacle.
© DC 13.8V jack
Connect a 13.8 V DC power supply to this jack.
® FUSE
Insert a 4 Ablade luse into this fuse holder.
TX our jack
Connect a TX antenna or a duplexer to this ENC
receptacle.
TRANSCEIVER OPERATION
I Receive
Adjust the volume to your desired level. You may
need to readiust the volume when you receive a
message from your dispatcher or another member in
your fleet.
- The BUSY indicator lights while a signal is being
received.
‘ I Transmit
1 Listen to the channel belore transmitting, to make
sure it is not being used.
2 Press the PTT switch and speak in your normal
speaking voice.
. FCC regulations require that you identify the
station you are calling as well as your own
station (your assigned call sign).
~ The TX indicator lights while transmitting.
3 When you finish speaking, release the PTT switch.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2001:06:07 14:00:32
Producer                        : Acrobat Distiller 4.0 for Windows
Author                          : jsoscia
Title                           : 60942.pdf
Modify Date                     : 2001:06:07 14:00:34-04:00
Page Count                      : 2

EXIF Metadata provided by EXIF.tools