Kenwood USA 31113110 Non-Broadcast Transmitter (UHF FM Repeater) User Manual Revised Manual Pages

Kenwood USA Corporation Non-Broadcast Transmitter (UHF FM Repeater) Revised Manual Pages

Contents

Revised Manual Pages

Download: Kenwood USA 31113110 Non-Broadcast Transmitter (UHF FM Repeater) User Manual Revised Manual Pages
Mirror Download [FCC.gov]Kenwood USA 31113110 Non-Broadcast Transmitter (UHF FM Repeater) User Manual Revised Manual Pages
Document ID127402
Application IDcJmO5ihXxlnd1a6ufTBAoA==
Document DescriptionRevised Manual Pages
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize4.36kB (54558 bits)
Date Submitted2000-12-21 00:00:00
Date Available2001-02-21 00:00:00
Creation Date2000-12-04 13:29:20
Producing SoftwareAcrobat PDFWriter 4.05 for Windows NT
Document Lastmod2000-12-04 13:29:57
Document TitleRevised Manual Pages
Document CreatorAdobe Acrobat PDF Link - 32
Document Author: Celia

(The following will be placed in the Instruction Manual)‘
MANDATORY SAFETY INSTRUCTIONS TO INSTALLERS & USERS
Use only manufacturer or dealer supplied antenna.
Antenna Minimum Safe Distance is 42 cm.
Antenna Gain: zero dBd referenced to a dipole.
The Federal Communications Commission has adopted a safety
standard for human exposure to RF (Radio Frequency) energy,
which is below the OSHA (Occupational Safety and Health
Act) limits.
Antenna Mounting: The antenna supplied by the manufacturer
or radio dealer must be mounted at a location such as a
radio tower or an access controlled roof— top, such that
during radio transmission, no person or persons can come
closer than the indicated minimum safe distance to the
antenna, i.e. 42cm‘ To comply with current FCC RF Exposure
limits, the antenna must be installed at or exceeding this
minimum safe distance, and in accordance with the
requirements of the antenna manufacturer or supplier.
Ease or Repeater Station Installation: The antenna should
be fixed— mounted on an outdoor permanent structure‘ RF
Exposure compliance must be addressed attthe time of
installation, including antenna co— location requirements
of 47 CFR Part 1.1307(b)(3).
Antenna substitution: Do not substitute any antenna for the
one supplied or recommended by the manufacturer or radio
dealer. You may be exposing person or persons to excess
radio frequency radiation. You may contact your radio
dealer or the manufacturer for further instructions.
WARNING: Duty cycle is 100%. Maintain a separation distance
from the antenna to person(s) of at least 42 cm.
“mesa-Lana 12/4/00

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Creator                         : Adobe Acrobat PDF Link - 32
Create Date                     : 2000:12:04 13:29:20
Author                          : Celia
Producer                        : Acrobat PDFWriter 4.05 for Windows NT
Modify Date                     : 2000:12:04 13:29:57-07:00
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: ALH31113110

Navigation menu