Kenwood USA 435002 UHF FM Transceiver User Manual User s Manual
Kenwood USA Corporation UHF FM Transceiver User s Manual
User's Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1854918 |
| Application ID | gCF3p/lTcM4KlZiOmyTg6A== |
| Document Description | User's Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 77.9kB (973744 bits) |
| Date Submitted | 2012-12-07 00:00:00 |
| Date Available | 2012-12-07 00:00:00 |
| Creation Date | 2017-10-29 04:45:02 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-29 04:45:02 |
| Document Title | User's Manual |
| Document Creator | Adobe InDesign CS2_J (4.0.5) |
INSTRUCTION MANUAL VHF FM TRANSCEIVER TK-2400 UHF FM TRANSCEIVER TK-3400 © B62-2478-00 (K) 09 08 07 06 05 04 03 02 01 00 THANK YOU We are grateful for your purchase of this KENWOOD product and welcome you to the Business Radio Service (BRS). Your KENWOOD 2-way Business Radio is called a “transceiver”, meaning “transmitter & receiver”. We believe this easy-touse transceiver will provide you with dependable and reliable communications. This KENWOOD transceiver is a precision device. Treat it with care, and you will enjoy years of reliable operation. FEATURES • • • • 4 channels (K) or 16 channels (K2) with 27 VHF operating frequencies (TK-2400) or 90 UHF operating frequencies (TK-3400) and 39 tones/ 168 codes settings for each channel allowing you to ignore unwanted calls. Built in voice scrambler gives you complete privacy for your conversations. Hands free operation when using an optional headset. Voice announcement lets you know which channel you have selected and which settings you have made when reassigning key functions and channel settings. OPERATING CONDITIONS Open locations (no obstructions) Up to 6 miles (9.6 km) Residential areas (near buildings) Up to 1.5 miles (2.4 km) In steel/ concrete reinforced buildings Up to 250,000 square feet (23,220 m2) In high rises Up to 20 floors Note: The listed ranges are based on field testing and may vary with your operating conditions and individual transceiver. FCC LICENSE INFORMATION Your KENWOOD transceiver operates on communications frequencies which are subject to FCC (Federal Communications Commission) Rules & Regulations. FCC Rules require that all operators using Private Land Mobile radio frequencies obtain a radio license before operating their equipment. Application for license must be made on FCC form 601, schedules D and H, and Remittance form 159. FAX: Forms can be obtained by fax from the FCC Fax-OnDemand system. Call 1-202-418-0177 from your fax machine and request document number 000601 for the form, schedules, and instructions. MAIL: Forms can be ordered by telephone, and will be sent to you by first class mail. Call the FCC Forms Hotline at 1-800-418-FORM (1-800-418-3676). INTERNET: Form 601 and instructions can be downloaded from the FCC Forms website at http://www.fcc.gov/formpage.html Before filling out your Form 601 application Technical Data section, you must decide on which frequencies you will operate. See the frequency charts on pages 14 and 15. QUESTIONS? Call the FCC for license application questions at 1-888-CALL-FCC (1-888-225-5322). One or more of the following statements may be applicable: FCC WARNING This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can generate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer for technical assistance. ATTENTION: The RBRC Recycle seal found on KENWOOD lithiumion (Li-ion) battery packs indicates KENWOOD’s voluntary participation in an industry program to collect and recycle Li-ion batteries after their operating life has expired. The RBRC program is an alternative to disposing Li-ion batteries with your regular refuse or in municipal waste streams, which is illegal in some areas. For information on Li-ion battery recycling in your area, call (toll free) 1-800-8-BATTERY (1-800-822-8837). KENWOOD’s involvement in this program is part of our commitment to preserve our environment and conserve our natural resources. ii NOTICES TO THE USER ◆ Government law prohibits the operation of unlicensed radio transmitters within the territories under government control. ◆ Illegal operation is punishable by fine and/or imprisonment. ◆ Refer service to qualified technicians only. Safety: It is important that the operator is aware of, and understands, hazards common to the operation of any transceiver. PRECAUTIONS • • • • • • • • • • • • Do not charge the transceiver and battery pack when they are wet. Ensure that there are no metallic items located between the transceiver and the battery pack. Do not use options not specified by KENWOOD. If the die-cast chassis or other transceiver part is damaged, do not touch the damaged parts. If a headset or headphone is connected to the transceiver, reduce the transceiver volume. Pay attention to the volume level when turning the squelch off. Do not place the microphone cable around your neck while near machinery that may catch the cable. Do not place the transceiver on unstable surfaces. Ensure that the end of the antenna does not touch your eyes. When the transceiver is used for transmission for many hours, the radiator and chassis will become hot. Do not touch these locations when replacing the battery pack. Do not immerse the transceiver in water. Always switch the transceiver power off before installing optional accessories. The charger is the device that disconnects the unit from the AC mains line. The AC plug should be readily accessible. iii Turn the transceiver power off in the following locations: • In explosive atmospheres (inflammable gas, dust particles, metallic powders, grain powders, etc.). • While taking on fuel or while parked at gasoline service stations. • Near explosives or blasting sites. • In aircrafts. (Any use of the transceiver must follow the instructions and regulations provided by the airline crew.) • Where restrictions or warnings are posted regarding the use of radio devices, including but not limited to medical facilities. • Near persons using pacemakers. • • • • • • • • • Do not disassemble or modify the transceiver for any reason. Do not place the transceiver on or near airbag equipment while the vehicle is running. When the airbag inflates, the transceiver may be ejected and strike the driver or passengers. Do not transmit while touching the antenna terminal or if any metallic parts are exposed from the antenna covering. Transmitting at such a time may result in a high-frequency burn. If an abnormal odor or smoke is detected coming from the transceiver, switch the transceiver power off immediately, remove the battery pack from the transceiver, and contact your KENWOOD dealer. Use of the transceiver while you are driving may be against traffic laws. Please check and observe the vehicle regulations in your area. Do not expose the transceiver to extremely hot or cold conditions. Do not carry the battery pack (or battery case) with metal objects, as they may short the battery terminals. Danger of explosion if the battery is incorrectly replaced; replace only with the same type. When operating the transceiver in areas where the air is dry, it is easy to build up an electric charge (static electricity). When using an earphone accessory in such conditions, it is possible for the transceiver to send an electric shock through the earphone and to your ear. We recommend you use only a speaker/microphone in these conditions, to avoid electric shocks. iv Information concerning the battery pack: The battery pack includes flammable objects such as organic solvent. Mishandling may cause the battery to rupture producing flames or extreme heat, deteriorate, or cause other forms of damage to the battery. Please observe the following prohibitive matters. • • • • • • Do not disassemble or reconstruct battery! The battery pack has a safety function and protection circuit to avoid danger. If they suffer serious damage, the battery may generate heat or smoke, rupture, or burst into flame. Do not short-circuit the battery! Do not join the + and – terminals using any form of metal (such as a paper clip or wire). Do not carry or store the battery pack in containers holding metal objects (such as wires, chain-necklace or hairpins). If the battery pack is short-circuited, excessive current will flow and the battery may generate heat or smoke, rupture, or burst into flame. It will also cause metal objects to heat up. Do not incinerate or apply heat to the battery! If the insulator is melted, the gas release vent or safety function is damaged, or the electrolyte is ignited, the battery may generate heat or smoke, rupture, or burst into flame. Do not use or leave the battery near fire, stoves, or other heat generators (areas reaching over 80°C/ 176°F)! If the polymer separator is melted due to high temperature, an internal short-circuit may occur in the individual cells and the battery may generate heat or smoke, rupture, or burst into flame. Do not immerse the battery in water or get it wet by other means! If the battery’s protection circuit is damaged, the battery may charge at extreme current (or voltage) and an abnormal chemical reaction may occur. The battery may generate heat or smoke, rupture, or burst into flame. Do not charge the battery near fire or under direct sunlight! If the battery’s protection circuit is damaged, the battery may charge at extreme current (or voltage) and an abnormal chemical reaction may occur. The battery may generate heat or smoke, rupture, or burst into flame. • • • • • • • Use only the specified charger and observe charging requirements! If the battery is charged in unspecified conditions (under high temperature over the regulated value, excessive high voltage or current over regulated value, or with a remodeled charger), it may overcharge or an abnormal chemical reaction may occur. The battery may generate heat or smoke, rupture, or burst into flame. Do not pierce the battery with any object, strike it with an instrument, or step on it! This may break or deform the battery, causing a short-circuit. The battery may generate heat or smoke, rupture, or burst into flame. Do not jar or throw the battery! An impact may cause the battery to leak, generate heat or smoke, rupture, and/or burst into flame. If the battery’s protection circuit is damaged, the battery may charge at an abnormal current (or voltage), and an abnormal chemical reaction may occur. The battery may generate heat or smoke, rupture, or burst into flame. Do not use the battery pack if it is damaged in any way! The battery may generate heat or smoke, rupture, or burst into flame. Do not solder directly onto the battery! If the insulator is melted or the gas release vent or safety function is damaged, the battery may generate heat or smoke, rupture, or burst into flame. Do not reverse the battery polarity (and terminals)! When charging a reversed battery, an abnormal chemical reaction may occur. In some cases, an unexpected large amount of current may flow upon discharging. The battery may generate heat or smoke, rupture, or burst into flame. Do not reverse-charge or reverse-connect the battery! The battery pack has positive and negative poles. If the battery pack does not smoothly connect with a charger or operating equipment, do not force it; check the polarity of the battery. If the battery pack is reverse-connected to the charger, it will be reversecharged and an abnormal chemical reaction may occur. The battery may generate heat or smoke, rupture, or burst into flame. vi • Do not touch a ruptured and leaking battery! If the electrolyte liquid from the battery gets into your eyes, wash your eyes with fresh water as soon as possible, without rubbing your eyes. Go to the hospital immediately. If left untreated, it may cause eye-problems. • Do not charge the battery for longer than the specified time! If the battery pack has not finished charging even after the regulated time has passed, stop it. The battery may generate heat or smoke, rupture, or burst into flame. Do not place the battery pack into a microwave or high pressure container! The battery may generate heat or smoke, rupture, or burst into flame. Keep ruptured and leaking battery packs away from fire! If the battery pack is leaking (or the battery emits a bad odor), immediately remove it from flammable areas. Electrolyte leaking from battery can easily catch on fire and may cause the battery to generate smoke or burst into flame. Do not use an abnormal battery! If the battery pack emits a bad odor, appears to have different coloring, is deformed, or seems abnormal for any other reason, remove it from the charger or operating equipment and do not use it. The battery may generate heat or smoke, rupture, or burst into flame. • • • vii CONTENTS UNPACKING AND CHECKING EQUIPMENT.......................... 1 PREPARATION .......................................................... 2 ORIENTATION ........................................................... 6 BASIC OPERATIONS ................................................... 8 VOICE OPERATED TRANSMISSION (VOX) .......................... 9 BACKGROUND OPERATIONS ........................................ 10 CHANNEL SETUP MODE.............................................. 11 KEY ASSIGNMENT MODE ............................................ 20 TROUBLESHOOTING GUIDE ......................................... 25 ALL RESET MODE ..................................................... 26 OPTIONAL ACCESSORIES ............................................ 26 Firmware Copyrights The title to and ownership of copyrights for firmware embedded in KENWOOD product memories are reserved for JVC KENWOOD Corporation. viii UNPACKING AND CHECKING EQUIPMENT Carefully unpack the transceiver. If any of the items listed below are missing or damaged, file a claim with the carrier immediately. SUPPLIED ACCESSORIES • • • • • • • • Battery charger/ AC adapter (KSC-35S) ................................ 1 Li-ion Battery pack (KNB-45L) ................................................ 1 Speaker/ microphone jack cover ............................................ 1 Speaker/ microphone locking bracket .................................... 1 Belt clip (KBH-10) ................................................................... 1 Screw (M3 x 8 mm) ................................................................. 2 Warranty card ......................................................................... 1 Instruction manual .................................................................. 1 Note: Refer to "PREPARATION" for accessory installation instructions. PREPARATION INSTALLING THE ANTENNA Antenna Screw the antenna into the connector on the top of the transceiver by holding the antenna at its base and turning it clockwise until secure. Note: The antenna is neither a handle, a key ring retainer, nor a speaker/ microphone attachment point. Using the antenna in these ways may damage the antenna and degrade your transceiver’s performance INSTALLING/ REMOVING THE BATTERY PACK ◆ Do not short the battery terminals or dispose of the battery by fire. ◆ Never attempt to remove the casing from the battery pack. 1 Align the battery pack with the back of the transceiver, then press the battery pack and transceiver firmly together until the release latch on the base of the transceiver locks. 2 To remove the battery pack, lift the safety catch on the base of the transceiver, then press the release latch underneath the safety catch. 3 While pressing the release latch, pull the battery pack away from the transceiver. CHARGING THE BATTERY PACK The battery pack is not charged at the factory; charge it before use. Average battery pack life (calculated using 5% transmit time, 5% receive time, and 90% standby time) is 17 hours. ATTENTION: Always switch OFF a transceiver equipped with a battery pack before inserting the transceiver into the charger. 1 Plug the AC adapter cable into the jack located on the rear of the charger. 2 Plug the AC adapter into an AC outlet. 3 Slide a battery pack or a transceiver equipped with a battery pack into the charging slot of the charger. • • Charging slot Indicator • • Make sure the metal contacts of the battery pack mate securely with the charger terminals. The indicator lights red and charging begins. 4 When charging is completed, the indicator lights green. Remove the battery pack or the transceiver from the charging slot of the charger. It takes approximately 3 hours to charge the battery pack. When the charger will not be used for a long time, unplug the AC adapter from the AC outlet. Note: ◆ When the indicator blinks red, the battery pack is either defective or the battery pack contacts are not properly mated with those of the charger. ◆ When the indicator flashes green and orange, the battery pack has not satisfied the charging start temperature. Remove the battery pack from the charger and wait until it reaches a normal temperature before charging it again. ◆ The ambient temperature should be between 41°F and 104°F (5°C and 40°C) while charging is in progress. Charging outside this range may not fully charge the battery. ◆ The battery pack life is over when its operating time decreases even though it is fully and correctly charged. Replace the battery pack. INSTALLING THE BELT CLIP If necessary, attach the belt clip using the two supplied M3 x 8 mm screws. Belt clip Note: If the belt clip is not installed, its mounting location may get hot during continuous transmission or when left sitting in a hot environment. Do not use glue which is designed to prevent screw loosening when installing the belt clip, as it may cause damage to the transceiver. Acrylic ester, which is contained in these glues, may crack the transceiver’s back panel. INSTALLING THE CAP OVER THE SPEAKER/ MICROPHONE JACKS Install the cap over the speaker/ microphone jacks when not using an optional speaker/ microphone. Note: To keep the transceiver water resistant, you must cover the speaker/ microphone jacks with the supplied cap. 1 Place the cap over the jacks so that the locking tabs insert into the transceiver grooves. 2 While holding the cap in place, push it towards the bottom of the transceiver until the tabs on the cap click into place. • To remove the cap, hold the top of the cap in place with your finger while inserting a 3 mm or smaller flat blade screwdriver under the bottom of the cap. Slowly slide the screwdriver in until its tip touches the tab inside the cap, then gently pry the cap up (handle of screwdriver moving away from the transceiver) to remove the cap. INSTALLING THE (OPTIONAL) SPEAKER/ MICROPHONE Note: The transceiver is not fully water resistant when using a speaker/ microphone or headset. 1 Insert the speaker/ microphone plugs into the speaker/ microphone jacks of the transceiver. 2 Place the locking bracket over the speaker/ microphone plugs so that the locking tabs insert into the transceiver grooves. 3 While holding the locking bracket in place, push it towards the bottom of the transceiver until the tabs on the bracket click into place. • To remove the locking bracket, push the bracket up from the base. ORIENTATION Antenna Battery pack Channel selector Rotate to change the operating channel. • • To change the operating frequency or QT/DQT settings of a channel, refer to “CHANNEL SETUP MODE” on page 11. Channel Announcement: When changing channels, the transceiver will announce the newly selected channel number. LED indicator For the LED indicator status, refer to page 8. Power switch/ Volume control Turn clockwise to switch the transceiver ON. To switch the transceiver OFF, turn counterclockwise until a click sounds. Rotate to adjust the volume level. PTT (Push to Talk) switch Press and hold, then speak into the microphone to transmit. Side 1 key Press to activate its programmable function. The default setting is Super Lock. • For function descriptions and details on how to change the function of the Side 1 key, refer to “KEY ASSIGNMENT MODE” on page 20. Side 2 key Press to activate its programmable function. The default setting is Scan Temporary Delete. • For function descriptions and details on how to change the function of the Side 2 key, refer to “KEY ASSIGNMENT MODE” on page 20. Speaker/ microphone jacks Insert the Speaker/ microphone or Headset plug into this jack. BASIC OPERATIONS 1 Turn the Power switch/ Volume control clockwise to switch the transceiver power ON. • A beep sounds. Rotate the Channel selector to select your desired channel. • When you receive an appropriate signal, you will hear audio from the speaker. Adjust the volume as necessary. 3 To make a call, press and hold the PTT switch, then speak into the microphone using your normal speaking voice. • Hold the microphone approximately 1.5 inches (3 to 4 cm) from your lips. 4 Release the PTT switch to receive. Note: When the battery pack voltage becomes too low, the Low Battery Warning sounds an alert tone every 30 seconds and the LED indicator blinks red. LED Indicator Status Indicator Color Meaning Lights red Transmitting Lights green Receiving a call Blinks red Battery power is low while transmitting Blinks green Scanning Blinks red/orange The selected channel has not been programmed and cannot be used. VOICE OPERATED TRANSMISSION (VOX) VOX operation allows you to transmit hands-free. VOX can only be used if you are using a supported headset. This function can be turned off for specific channels. To activate VOX and set the VOX Gain level, perform the following steps: 1 Connect the headset to the transceiver . • The VOX function does not activate when a headset is not connected to the accessory terminal of the transceiver. 2 With the transceiver power OFF, press and hold the Side 1 key while turning the transceiver power ON. 3 Continue to hold the Side 1 key until a beep sounds. • • The LED indicator lights turn orange. When the Side 1 key is released, the transceiver will announces the VOX Gain level (the default level is OFF, so, a double beep sounds). 4 Press the Side 1 key to select the VOX Gain level of the radio (from 1~10 or Off). • Press the Side 2 key to enable or disable the VOX function for the current channel (you can change this setting for each channel by selecting a channel with the Channel selector). When turned ON, a beep sounds. When turned OFF, a double beep sounds. 5 Press the PTT switch to save the setting. • • A beep will sound. The transceiver announces the new VOX Gain level. 6 Turn the transceiver power OFF and then ON again to activate VOX. Note: ◆ The transceiver will automatically return to normal operation if no action is performed for 20 seconds. ◆ VOX Gain level 1 is the least sensitive and VOX Gain level 10 is the most sensitive. ◆ If a headset is connected to the transceiver while the VOX function is switched ON and the VOX Gain level is configured to a higher, more sensitive level, louder received signals may cause the transceiver to start transmission. BACKGROUND OPERATIONS TIME-OUT TIMER (TOT) The Time-out Timer prevent callers from using a channel for an extended duration (60 seconds). If you continuously transmit for the duration, transmission will stop and an alert tone will sound. To stop the tone, release the PTT switch. LOW BATTERY WARNING While operating the transceiver, the Low Battery Warning sounds an alert tone every 30 seconds and the LED indicator blinks red when the battery needs recharged or replaced. CHANNEL ANNOUNCEMENT When changing the channel, the transceiver will announce the newly selected channel number. Likewise, the transceiver will announce the current channel after you turn the transceiver power ON. 10 CHANNEL SETUP MODE This transceiver allows you to reprogram each of the channels with different frequencies and QT (Quiet Talk)/ DQT (Digital Quiet Talk) settings. The table below lists the default channel settings. Channel Number 10 11 12 13 14 15 16 Table Number Frequency (MHz) QT/DQT Setting TK-2400 (K) 4 channel model 20 154.4900 67.0 Hz 21 154.5150 67.0 Hz 151.6250 67.0 Hz 151.9550 67.0 Hz TK-2400 (K2) 16 channel model 20 154.4900 67.0 Hz 21 154.5150 67.0 Hz 151.6250 67.0 Hz 151.9550 67.0 Hz 10 151.5125 67.0 Hz 12 151.6850 67.0 Hz 15 151.7750 67.0 Hz 26 158.4000 67.0 Hz 151.6250 77.0 Hz 151.6250 88.5 Hz 151.6250 179.9 Hz 151.9550 82.5 Hz 151.9550 94.8 Hz 151.9550 179.9 Hz 151.7000 67.0 Hz 151.7600 67.0 Hz 11 Channel Number 10 11 12 13 14 15 16 Table Number Frequency (MHz) QT/DQT Setting TK-3400 (K) 4 channel model 464.5500 467.9250 461.0375 10 461.0625 TK-3400 (K2) 16 channel model 464.5500 467.9250 461.0375 10 461.0625 11 461.0875 12 461.1125 13 461.1375 14 461.1625 464.5000 467.7625 467.8125 467.8500 467.8750 467.9000 15 461.1875 16 461.2125 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz Note: Due to FCC regulations, the default values of TK-2400/ TK2300 (VHF) are different from TK-2200 (VHF) series. Make sure to choose a compatible frequency to interoperate with each other. 12 CHANNEL OPERATING FREQUENCIES To change the operating frequency of a channel: 1 With the transceiver power OFF, press and hold the PTT switch and Side 1 key while turning the transceiver power ON. • Continue to hold the PTT switch and Side 1 key until the LED lights orange and the transceiver announces “Self”. 2 Release the PTT switch and Side 1 key. • • The transceiver announces “Channel”. Pressing the Side 1 key or Side 2 key will toggle between QT, DQT, and Channel setup. 3 Press and release the PTT switch, then rotate the Channel selector to your desired channel. • Upon pressing and releasing the PTT switch, a beep will sound and the transceiver announces “Table zero”. 4 Press the Side 1 or Side 2 key to increment/ decrement the Table number, to select the new channel frequency. • • • Press and hold the Side 1 or Side 2 key to increment/ decrement the number by 5 at a time. Table numbers and their corresponding operating frequencies are provided in the table on page 14. A voice announcement will inform you of the currently selected Table number. 5 Press the PTT switch to save the setting. • • A beep will sound. Repeat steps 3 to 5 to set up another channel. 6 Turn the transceiver power OFF and then ON again to activate the new settings. Note: The transceiver will automatically return to normal operation if no action is performed for 20 seconds. 13 TK-2400 Operating Table Number Frequency (MHz) 10 11 12 13 OFF 151.6250 151.9550 152.8850 152.9150 151.7000 151.7600 152.9450 151.8350 151.8050 151.5125 151.6550 151.6850 151.7150 TK-3400 Operating Table Number Frequency (MHz) 10 11 12 13 14 14 OFF 464.5000 464.5500 467.7625 467.8125 467.8500 467.8750 467.9000 467.9250 461.0375 461.0625 461.0875 461.1125 461.1375 461.1625 TK-2400 Operating Table Number Frequency (MHz) 14 15 16 17 18 19 20 21 22 23 24 25 26 27 151.7450 151.7750 151.8650 151.8950 151.9250 152.9000 154.4900 154.5150 154.5275 154.5400 153.0050 154.5475 158.4000 158.4075 TK-3400 Operating Table Number Frequency (MHz) 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 461.1875 461.2125 461.2375 461.2625 461.2875 461.3125 461.3375 461.3625 462.7625 462.7875 462.8125 462.8375 462.8625 462.8875 462.9125 TK-3400 Operating Table Number Frequency (MHz) 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 464.4875 464.5125 464.5375 464.5625 466.0375 466.0625 466.0875 466.1125 466.1375 466.1625 466.1875 466.2125 466.2375 466.2625 466.2875 466.3125 466.3375 466.3625 467.7875 467.8375 467.8625 467.8875 467.9125 469.4875 469.5125 469.5375 469.5625 462.1875 462.4625 462.4875 462.5125 TK-3400 Operating Table Number Frequency (MHz) 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 467.1875 467.4625 467.4875 467.5125 451.1875 451.2375 451.2875 451.3375 451.4375 451.5375 451.6375 452.3125 452.5375 452.4125 452.5125 452.7625 452.8625 456.1875 456.2375 456.2875 468.2125 468.2625 468.3125 468.3625 468.4125 468.4625 468.5125 468.5625 468.6125 468.6625 15 QT/ DQT SETTINGS Quiet Talk (QT) and Digital Quiet Talk (DQT) are functions that reject undesired signals on your channel. You will hear a call only when you receive a signal that contains a matching QT tone or DQT code. If a call containing a different tone or code is received, squelch will not open and you will not hear the call. Likewise, when transmitting using QT or DQT, the receiving station must have a matching tone or code to hear your call. Be aware that other parties can still hear your calls if they set up their transceiver with the same tone or code. To change the QT/DQT settings of a channel: 1 With the transceiver power OFF, press and hold the PTT switch and Side 1 key while turning the transceiver power ON. • Continue to hold the PTT switch and Side 1 key until the LED lights orange and the transceiver announces “Self”. 2 Release the PTT switch and Side 1 key. • • The transceiver announces “Channel”. Pressing the Side 1 key or Side 2 key will toggle between QT, DQT, and Channel setup. 3 Press the Side 1 or Side 2 key to select QT or DQT setup. • The transceiver announces “QT” or “DQT”, depending on your selection. 4 Press and release the PTT switch, then rotate the Channel selector to your desired channel. • Upon releasing the PTT switch, the transceiver announces “QT One” or “DQT One”, depending on your selection. 5 Press the Side 1 or Side 2 key to increment/ decrement the Tone number, to select the new tone or code. • • • Tone numbers and their corresponding tones/ codes are provided in the table on pages 17 and 18. Press and hold the Side 1 or Side 2 key to increment/ decrement the QT or DQT number by 5 at a time. A voice announcement will inform you of the currently selected QT or DQT number. 16 6 Press the PTT switch to save the setting. • • A beep will sound. Repeat steps 3 to 6 to set up another channel. 7 Turn the transceiver power OFF and then ON again to activate the new settings. Note: The transceiver will automatically return to normal operation if no action is performed for 20 seconds. QT Channel Settings: QT Number QT Frequency QT Number QT Frequency QT Number QT Frequency 10 11 12 13 14 67.0 Hz 71.9 Hz 74.4 Hz 77.0 Hz 79.7 Hz 82.5 Hz 85.4 Hz 88.5 Hz 91.5 Hz 94.8 Hz 97.4 Hz 100.0 Hz 103.5 Hz 107.2 Hz 15 16 17 18 19 20 21 22 23 24 25 26 27 28 110.9 Hz 114.8 Hz 118.8 Hz 123.0 Hz 127.3 Hz 131.8 Hz 136.5 Hz 141.3 Hz 146.2 Hz 151.4 Hz 156.7 Hz 162.2 Hz 167.9 Hz 173.8 Hz 29 30 31 32 33 34 35 36 37 38 39 off 179.9 Hz 186.2 Hz 192.8 Hz 203.5 Hz 210.7 Hz 218.1 Hz 225.7 Hz 233.6 Hz 241.8 Hz 250.3 Hz 69.3 Hz OFF 17 DQT Channel Settings: DQT DQT DQT DQT DQT DQT DQT DQT Number Code Number Code Number Code Number Code 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 D023N D025N D026N D031N D032N D043N D047N D051N D054N D065N D071N D072N D073N D074N D114N D115N D116N D125N D131N D132N D134N D143N D152N D155N D156N D162N D165N D172N D174N D205N 18 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 D223N D226N D243N D244N D245N D251N D261N D263N D265N D271N D306N D311N D315N D331N D343N D346N D351N D364N D365N D371N D411N D412N D413N D423N D431N D432N D445N D464N D465N D466N 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 D503N D506N D516N D532N D546N D565N D606N D612N D624N D627N D631N D632N D654N D662N D664N D703N D712N D723N D731N D732N D734N D743N D754N D645N D023I D025I D026I D031I D032I D043I 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 D047I D051I D054I D065I D071I D072I D073I D074I D114I D115I D116I D125I D131I D132I D134I D143I D152I D155I D156I D162I D165I D172I D174I D205I D223I D226I D243I D244I D245I D251I DQT DQT DQT DQT DQT DQT DQT DQT Number Code Number Code Number Code Number Code 121 122 123 124 125 126 127 128 129 130 131 132 133 D261I D263I D265I D271I D306I D311I D315I D331I D343I D346I D351I D364I D365I 134 135 136 137 138 139 140 141 142 143 144 145 146 D371I D411I D412I D413I D423I D431I D432I D445I D464I D465I D466I D503I D506I 147 148 149 150 151 152 153 154 155 156 157 158 159 D516I D532I D546I D565I D606I D612I D624I D627I D631I D632I D654I D662I D664I 160 161 162 163 164 165 166 167 168 off D703I D712I D723I D731I D732I D734I D743I D754I D645I OFF CHANNEL CONFIRMATION MODE To confirm your channel settings: 1 With the transceiver power OFF, press and hold the PTT switch while turning the transceiver power ON. • Continue to hold the PTT switch until the LED lights orange and the transceiver announces “Confirm”. 2 Release the PTT switch. • Transceiver announces the channel table number, tone number, scrambler and VOX settings of the selected channel. 3 Rotate the Channel selector to your desired channel within 20 seconds, otherwise the operation will cancel. • Transceiver announces the channel table number, tone number, scrambler and VOX settings of the selected channel. Note: The transceiver will automatically return to normal operation if no action is performed for 20 seconds. 19 KEY ASSIGNMENT MODE This transceiver allows you to reprogram the Side 1 and Side 2 keys with any of the functions listed in the table below. Explanations on the use of each function are provided under “PROGRAMMABLE FUNCTIONS”, on page 22. Table Number Function Name None (no function) Calling Alert Key Lock Key Lock with Status Memory Monitor Monitor Momentary Scan Scan Temporary Delete (Side 2 key default) Scrambler Squelch Off 10 Squelch Off Momentary 11 Super Lock (Side 1 key default) 12 Low Transmit Power 20 To change the functions of the Side 1 and Side 2 keys: 1 With the transceiver power OFF, press and hold the Side 1 and Side 2 keys while turning the transceiver power ON. • Continue to hold the Side 1 and Side 2 keys until the LED lights orange and the transceiver announces “Setup”. 2 Continue to press and hold the key to be reprogrammed (either the Side 1 or Side 2 key), while releasing the remaining key. • • The transceiver will announce “Table zero”. If you continue to hold both keys, or if you release both keys, the operation will cancel in 20 seconds. 3 Release the key. 4 Press the Side 1 or Side 2 key to increment/ decrement the number, to select the new key function. • • Table numbers and their corresponding functions are provided in the table on page 20. A voice announcement will inform you of the currently selected Table number. 5 Press the PTT switch to save the setting. • A beep will sound and the transceiver will announce the new Table number. 6 Turn the transceiver power OFF and then ON again to activate the new settings. Note: The transceiver will automatically return to normal operation if no action is performed for 20 seconds. 21 PROGRAMMABLE FUNCTIONS ■ Calling Alert Calling alert tone helps alerting party members that you are calling. To make a call, press the key programmed as Calling Alert. • Release the key to end the tone, and press and hold the PTT switch to transmit and speak into the microphone. ■ Key Lock Press and hold this key for 1 second to lock/ unlock the transceiver keys. The following keys/ functions can still be used when Key Lock is active: Calling Alert, Key Lock, Monitor, Monitor Momentary, PTT, Squelch Off, Squelch Off Momentary, Selector, Super Lock, Key Lock with Status Memory, and Volume Control. • When the transceiver power is turned OFF and then ON again, the Key Lock function will be cancelled. ■ Key Lock with Status Memory This operates the same as Key Lock except that when the transceiver power is turned OFF and then ON again, the keys remain locked. Without Status Memory, when the transceiver power is turned OFF and then ON again, the Key Lock function will be cancelled. ■ Monitor Momentarily press this key to deactivate QT or DQT signaling. Press the key again to return to normal operation. ■ Monitor Momentary Press and hold this key to deactivate QT or DQT signaling. Release the key to return to normal operation. 22 ■ Scan Scan is useful for monitoring signals on the transceiver channels. When scanning, the transceiver checks for a signal on each channel and only stops if a signal is present. If the QT/DQT matches, the transceiver stops at the channel and opens the squelch so you can listen to the call. If the QT/DQT does not match, the call is ignored and scanning continues. ■ Scan Temporary Delete (Side 2 key default) Press this key to start scanning the transceiver channels. When Scan pauses at an undesired channel, you can remove that channel from the scanning sequence by pressing and holding this key for 3 seconds. ■ Scrambler Press this key to activate (a single beep sounds) and deactivate (a double beep sounds) the scrambler function of the selected channel. The Scrambler function allows you to hold a conversation in complete privacy. When the Scrambler function is activated, any other party that is listening to your channel will be unable to understand your conversation. ■ Squelch Off Press this key to hear background noise. Press the key again to return to normal operation. ■ Squelch Off Momentary Press and hold this key to hear background noise. Release the key to return to normal operation. 23 ■ Super Lock (Side 1 key default) Super Lock locks the same keys as Key Lock. Press and hold this key for 4 seconds to lock the transceiver keys. To deactivate Super Lock, with the transceiver power OFF, press and hold the Side 2 key for 2 seconds while turning the transceiver power ON. • When the LED lights orange, release the Side 2 key. A confirmation tone will sound. ■ Low Transmit Power Press this key to change the transmit power to low power. Each time you press this key, the transmit power toggles between high and low. 24 TROUBLESHOOTING GUIDE Problem Solution • Cannot turn the transceiver power ON. Battery power dies shortly after charging. Cannot talk to or hear other members in your group. • • The battery pack life is finished. Replace the battery pack with a new one. • Make sure you are using the same frequency and QT/DQT settings as the other members in your group. Other group members may be using the Scrambler function. Turn on your transceiver’s Scrambler. Other group members may be too far away. Make sure you are within range of the other transceivers. • • • Other voices (besides group members’) are present on the channel. The battery pack may be dead. Recharge or replace the battery pack. The battery pack may not be installed correctly. Remove the battery pack and install again. Change the QT/DQT settings. Make sure all group members change the settings on their transceivers to match the new QT/DQT setting. 25 ALL RESET MODE At some point in time, you may desire to reset the transceiver settings to their default values. This function will reset all channels to their default frequencies and QT/DQT, the VOX function to its default status, and all keys to their default functions. To reset the transceiver: 1 With the transceiver power OFF, press and hold the PTT switch, the Side 1 key, and the Side 2 key while turning the transceiver power ON. • Continue to hold the keys for 2 seconds, until the LED lights orange. 2 Release the keys. • • The keys must be released within 2 second after the LED lights orange, otherwise All Reset Mode will cancel. The transceiver announces “Confirm” and returns to normal operation. OPTIONAL ACCESSORIES • • • • • • • • • KMC-21 (Speaker/ microphone) KMC-45 (Speaker/ microphone) KHS-1 (Headset) KHS-22 (Headset) KNB-45L (Li-ion battery pack)) KSC-35S (Rapid charger) KSC-356 (Multiple charger) KBH-10 (Belt clip) KWR-1 (Water resistant bag) 26 Radio FRequency eneRgy SaFety inFoRmation This Kenwood transceiver has been tested and complies with the standards listed below, in regards to Radio Frequency (RF) energy and electromagnetic energy (EME) generated by the transceiver. • FCC RF exposure limits for Occupational Use Only . RF Exposure limits adopted by the FCC are generally • • • based on recommendations from the National Council on Radiation Protection and Measurements, & the American National Standards Institute. FCC OET Bulletin 65 Edition 97-01 Supplement C American National Standards Institute (C95.1 – 1992) American National Standards Institute (C95.3 – 1992) This Kenwood transceiver generates RF EME while transmitting. RF EME (Radio Frequency Electric & Magnetic Energy) has the potential to cause slight thermal, or heating effects to any part of your body less than the recommended distance from this radio transmitter’s antenna. RF energy exposure is determined primarily by the distance to and the power of the transmitting device. In general, RF exposure is minimized when the lowest possible power is used or transmission time is kept to the minimum required for consistent communications, and the greatest distance possible from the antenna to the body is maintained. The transceiver has been designed for and is classiied for Occupational Use Only . Occupational/ controlled exposure limits are applicable to situations in which persons are exposed to RF energy as a consequence of their employment, and such persons have been made aware of the potential for exposure and can exercise control over their exposure. This means you can use the transceiver only if you are aware of the potential hazards of operating a transceiver and are familiar in ways to minimize these hazards. This transceiver is not intended for use by the general public in uncontrolled environments. Uncontrolled environment exposure limits are applicable to situations in which the general public may be exposed to RF energy, or in which the persons who are exposed as a consequence of their employment may not be fully aware of the potential for exposure or cannot exercise control over their exposure. The following list provides you with the information required to ensure that you are aware of RF exposure and of how to operate this transceiver so that the FCC RF exposure limitations are not exceeded. • • • While transmitting (holding the Ptt switch or speaking with VoX enabled), always keep the antenna and the radio at least 3 cm (1 3/16 inches) from your body or face, as well as from any bystanders. A LED on the top of the radio shows red when the transmitter is operating in both Ptt and VoX modes. Do not transmit for more than 50% of the total transceiver use time; transmitting over 50% of the total use time may exceed the limits in accordance to the FCC RF exposure requirements. Nominal transceiver operation is 5% transmission time, 5% reception time, and 90% stand-by time. Use only the speciied antenna for this transceiver; this may be either the antenna provided with the transceiver or another antenna authorized by Kenwood. Use only Kenwood authorized accessories (antennas, battery packs, belt clips, Speaker/ Mics or headsets etc.): When worn on the body, always place the radio in a Kenwood recommended clip or carrying case meant for this product. The use of other than recommended or approved body- worn accessories may result in RF exposure levels which exceed the FCC’s occupational/ controlled environment RF exposure limits. To ensure that your exposure to RF EME is within the FCC limits for occupational use, you must observe and adhere to the above points. electromagnetic interference compatibility Electronic devices are susceptible to electromagnetic interference (EMI) if they are not adequately shielded or designed for electromagnetic compatibility. Because this transceiver generates RF energy, it can cause interference to such equipment. • • Turn OFF your transceiver where signs are posted to do so. Hospitals and health care facilities use equipment that is sensitive to electromagnetic radiation. Turn OFF your transceiver while on board an aircraft when so instructed. Use of the transceiver must be in accordance with airline regulations and/or crew instructions. B59-2546-00
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Create Date : 2012:07:31 10:12:28+09:00 Creator : Adobe InDesign CS2_J (4.0.5) Modify Date : 2012:11:15 17:56:23-07:00 Title : Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2012:11:15 17:56:23-07:00 Creator Tool : Adobe InDesign CS2_J (4.0.5) Format : application/pdf Document ID : uuid:891c7830-49b4-4459-bbff-833ec79fdf3a Instance ID : uuid:ecae6010-3b5e-4506-b850-eb69398abbc1 Producer : Adobe Acrobat Pro 10.1.3 Page Count : 37EXIF Metadata provided by EXIF.tools