Kenwood DVR 7000 Dvr7000hddvcs_b_1a_us User Manual To The 9ab5d476 7286 4adf B12d 17d8d9213d81
User Manual: Kenwood DVR-7000 to the manual
Open the PDF directly: View PDF 
.
Page Count: 100
| Download | |
| Open PDF In Browser | View PDF |
USER MANUAL DVR-7000 Viaccess© Digital Satellite Receiver Printed on recycled paper Issue: dvr7000hddvcs_b_1a_us © 2002 EchoStar International Corporation - The Netherlands We encourage you to express your thoughts on this user manual. Please send your comments to: EchoStar International Corporation Technical Publications Department Schuilenburglaan 5a 7604 BJ Almelo The Netherlands Preface PREFACE 1. DEAR CUSTOMER Thank you for purchasing an EchoStar satellite receiver. This receiver is of the latest generation for which it is possible to upgrade the software to keep up with the newest developments. Please read this user manual carefully, to be able to safely install, use and maintain the receiver for maximum performance. Keep this user manual next to your receiver for future reference. Please make a note of the serial number in the space below. This helps to trace and identify the receiver in case of theft. Also questions to our help desk can be answered more accurate if you can provide the details as mentioned on the serial number plate. You find the serial number plate at the rear panel of the receiver. Type: ............................................................................................................... S/N: .................................................................................................................. Software Version: ........................................................................................... © 2002 EchoStar International Corporation All rights reserved 2. INTENDED USE This user manual is intended for anyone who uses an EchoStar satellite receiver. It can be used by both first-time and experienced users of satellite receivers who want to install, use and maintain their receiver. This user manual is applicable for the EchoStar DVR-7000 Viaccess Digital Satellite Receiver and the related accessories. This user manual is divided into separate sections and chapters. For easy access to the information, a clear table of content and an index are provided. 3. WARRANTY COMMON INTERFACE-MODULES AND SMART CARDS For pay-services, please only use Common Interface (CI) modules and the related smart cards which are approved by the service provider of the encrypted program you want to receive. Only this will enable the receiver to work properly. Anomalies can occur when unapproved CI-modules and/or smart cards are used. EchoStar can not and will not accept any responsibility for the performance of such CI-modules and/or smart cards. If you use unapproved CI-modules and/or smart cards, EchoStar is no longer able to provide any assistance or support. Use of unapproved CI-modules and/or smart cards will void any warranty claim. If you have any doubt which CI-modules are approved, please ask your service provider for assistance. 4. DISCLAIMER SATELLITE RECEIVER EchoStar International Corporation has to the best of her abilities, everything done to supply you with a satellite receiver built to the most up-to-date software and hardware. EchoStar International Corporation makes no warranties with respect to the reception of the channels provided by the broadcast service providers and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. EchoStar International Corporation reserves the right, for whatever reason, to revise, change or modify the hard- and software of the satellite receiver without the obligation to notify or warrant any person or organization of such change. Therefore, please visit our website, on a regular basis, for the latest information available. Digital Satellite Receiver Page I Preface SOFTWARE DOWNLOADS EchoStar International Corporation will to the best abilities, do everything possible to supply you with software updates to keep your receiver as up-to-date as technically possible. EchoStar International Corporation makes no warranties with respect to the use of the supplied software downloads and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. EchoStar International Corporation reserves the right, for whatever reason, to revise, change or modify the software that can be used by your satellite receiver without the obligation to notify or warrant any person or organization of such change. Therefore, please visit our website, on a regular basis, for the latest software available. USER MANUAL EchoStar International Corporation has to the best of her abilities, everything done to supply you with the most up-to-date information. EchoStar International Corporation makes no warranties with respect to the information provided by this user manual and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. The information provided is meant as a guideline for the use and maintenance of the receiver. EchoStar International Corporation reserves the right to revise, change or translate this user manual without the obligation to notify any person or organization of such change. Therefore, please visit our website, on a regular basis, for the latest information available. 5. COPYRIGHT AND TRADEMARKS No part of this user manual may be copied, distributed, transmitted, stored in a retrieval system or translated into any human or computer language, in any form or by any other means, electronically, mechanically, magnetically, manually or otherwise or disclosure to third parties without the express written permission of EchoStar International Corporation. EchoStar International Corporation is possibly in the possession of patents, requests for patent approval, trademarks, copyrights and other intellectual property with respect to the contents within this user manual. The submission of this user manual does not imply you have got any license or other legal right for the use of the here above mentioned without the express written permission of EchoStar International Corporation. © and Quality has a Name are registered trademarks of EchoStar International Corporation; DVB, Digital Video Broadcasting is a registered trademark of the The Digital Video Broadcasting Project (1991 to 1996) which is an industry-led consortium of over 300 broadcasters, manufacturers, network operators, software developers, regulatory bodies and others in over 35 countries committed to designing global standards for the delivery of digital television and data services. Dolby Digital Dolby, Dolby Digital, AC-3 and Dolby Pro Logic are registered trademarks of the Dolby Laboratories Licensing Corporation; Viaccess® Viaccess is a registered trademark of VIACCESS SA, a France Telecom Group company that delivers end-to-end solutions for digital pay-TV services and multimedia applications, built around our DVB MPEG-2 compatible VIACCESS® Conditional Access System, and interactively engines such as OpenTV. All other trademarks are the property of their respective owners or companies. ■ EchoStar, EchoNAV ■ ■ ■ ■ Page II EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved © 2001 EchoStar International Corporation. All rights reserved worldwide. This user manual has been provided pursuant to an agreement containing restrictions on its use. This user manual is also covered by Federal Copyright Law. Preface TABLE OF CONTENTS Preface 1 2 3 4 5 DEAR CUSTOMER INTENDED USE WARRANTY DISCLAIMER COPYRIGHT AND TRADEMARKS I I I I II Safety Information 1 2 3 4 GENERAL SAFETY ELECTRICAL SAFETY WARNINGS, CAUTIONS AND NOTES SYMBOLS USED ON THE RECEIVER 1-1 1-1 1-2 1-2 Preparation © 2002 EchoStar International Corporation All rights reserved 1 2 3 4 5 6 STORAGE AND TRANSPORT TO UNPACK YOUR RECEIVER THE CONTENTS OF THE BOX THE DISPOSAL OF YOUR PACKING MATERIALS TO SETUP YOUR PERIPHERAL EQUIPMENT TO SETUP THE RECEIVER 2-1 2-1 2-1 2-1 2-2 2-2 Installation 1 2 3 CONNECT YOUR EQUIPMENT CONNECT A DISH TO SETUP YOUR RECEIVER FOR THE FIRST TIME 3-1 3-2 3-4 Familiarization 1 2 3 4 5 THE RECEIVER THE ECHONAV INSTALLATION MENU THE ECHONAV MODE AND SELECTION MENUS THE ELECTRONIC PROGRAM GUIDE (EPG) THE INFOBANNER AND POP-UP MENUS 4-1 4-4 4-14 4-16 4-18 Operation 1 2 3 4 5 6 TO NAVIGATE THROUGH THE MENUS USE THE FAVORITE LISTS TO USE THE ELECTRONIC PROGRAM GUIDE (EPG) TO USE THE DVR TO USE THE MP3 PLAYER TO SET THE USER PREFERENCES 5-1 5-7 5-10 5-14 5-18 5-19 Maintenance 1 2 3 HARDWARE MAINTENANCE SOFTWARE MAINTENANCE END OF LIFE DISPOSAL Digital Satellite Receiver 6-1 6-1 6-7 Page III Preface Troubleshooting 1 2 3 4 5 6 7 GENERAL EPG RELATED TV AND RADIO RELATED REMOTE CONTROL UNIT (RCU) RELATED DVR RELATED MP3 PLAYER RELATED INSTALLATION RELATED 7-1 7-1 7-2 7-3 7-3 7-4 7-4 Glossary 1 2 3 LIST OF USED ABBREVIATIONS EXPLANATION OF USED TERMINOLOGY EXPLANATION OF THE SEARCH MODES 8-1 8-2 8-4 Index Appendix 1 1 2 3 LNB CONFIGURATION MATRIX LNBF CONFIGURATION MATRIX USER DEFINED LNB(F) MATRIX A1-1 A1-1 A1-1 Appendix 2 Page IV INTRODUCTION THE BATTERIES THE KEYS PROGRAM THE TV, VCR AND AUX KEY SPECIAL SETUP FUNCTIONS SPECIAL FUNCTIONS TROUBLESHOOTING EQUIPMENT CODES A2-1 A2-1 A2-1 A2-3 A2-4 A2-5 A2-7 A2-8 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved 1 2 3 4 5 6 7 8 Safety Information Section 1 SAFETY INFORMATION 1. GENERAL SAFETY Read this manual carefully and make sure you understand the instructions given. For your safety, know what the reaction upon each action will be. Do not perform any actions which are not described in this manual, failing to do so might result in an uncontrolled behavior of the receiver or even in a hazardous situation for persons and/or equipment. Disconnect the receiver from the mains before you start any maintenance or installation procedures. Do not use alcohol or ammonia based liquids to clean the receiver. If required, clean with a soft lint-free cloth slightly made damp with a mild soap solution. Consult an authorized service technician if the receiver does not operate normally when the instructions in this user manual are strictly followed. Do not to attempt to open the receiver, as you will be exposed to a shock hazard. Do not put any objects on top of the receiver which could fall through the ventilation slots or which could cover them and prevent proper cooling of the components inside. Do not put any (foreign) objects into the ventilation or CI-slots. This can cause fire or an electrical shock by shorting the internal components. Make sure that nothing rests on the receivers cables and that the cables are not located where they can cause injury to persons and pets (e.g to stumble over, eat the cable). © 2002 EchoStar International Corporation All rights reserved Do not install the receiver: ■ in a closed or poorly ventilated cabinet; ■ directly on top of or under another equipment; ■ on a surface which will obstruct the ventilation slots. Do not expose the receiver and it’s accessories: ■ to rain or excessive moisture to avoid the risk of shock or permanent damage to your receiver; ■ to direct sunlight, heaters, stoves or any other heat generating equipment; ■ to any magnetic objects, such as speakers, electric motors, transformers, etc.; ■ to excessive vibration. To help avoid possible damage to the receiver’s electronics: ■ wait 5 seconds after you switched off the receiver before you move the receiver or disconnect any equipment; ■ do not touch the components or pins on the CI-module or the smart card and hold the CI-module and the smart card by it’s edges. 2. ELECTRICAL SAFETY When using or connecting electrical equipment always observe the safety regulations applicable in your country to reduce the risk of fire, electrical shock, and personal injury. Read and comply at least with the given safety instructions. ■ Always make sure that the electrical power supply corresponds with the voltage on the electrical identification plate at the rear of the receiver next to the electrical cord. ■ Your receiver is double insulated and complies with the EN 50144; therefore no additional earth wire is required, though the use of an earth leak switch and/or over voltage protection switch is recommended. ■ Only use an approved extension (convenience) lead suitable for the electrical power consumption of the installed equipment. Digital Satellite Receiver Page 1 - 1 1 Section 1 3. Safety Information WARNINGS, CAUTIONS AND NOTES Throughout this user manual, there may be blocks of text indicated by symbols and printed in a different way then the surrounding text. These blocks of text ask the attention of the reader to avoid hazardous situations. The hazard levels are indicated as: WARNING THIS INDICATES A HAZARDOUS SITUATION WHICH, IF NOT AVOIDED, COULD RESULT IN (SERIOUS) INJURY. CAUTION This indicates a situation which, if not avoided, could damage the equipment or other properties. NOTE This indicates additional information to the user to make the user aware of possible problems and information of any importance to help the user to understand, to use and to maintain the installation. 4. SYMBOLS USED ON THE RECEIVER The next paragraphs explain the meaning of the symbols, present on the receiver. The Dolby Digital logo. This logo tells you that this receiver is compliant with the Dolby Digital standard. The Digital Video Broadcasting logo. This logo tells you that this receiver is compliant with the DVB standards as registered under registration number 2365. The Digital Recording logo. This logo tells you that this receiver has a hard disk drive which gives you the capability to record TV and radio programs digitally. The MP3 logo. This logo tells you that this receiver has a MP3 player inside. The Viaccess logo. This logo tells you that this receiver has an embedded Viaccess smart card reader. The required smart card has to be obtained from a service provider who scrambles the programs according the Viaccess encryption method. 4.2. SYMBOLS ON THE REAR PANEL The caution ‘risk of electrical shock - do not open’ symbol This symbol tells you that you are not allowed to open the receiver. Only authorized (service) technicians are allowed to open the box. The CE mark. This mark tells you that the receiver is following the provisions of Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to the electromagnetic compatibility and the provisions of Council Directive 73/23/EEC and 93/68/EEC on the approximation of the laws of the Member States relating to low voltage and electrical safety. The double insulation symbol. This symbol tells you that the receiver is electrically safe within the normal use of the receiver as stated in the safety chapter. Page 1 - 2 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved 4.1. SYMBOLS ON THE FRONT PANEL Preparation Section 2 PREPARATION 1. STORAGE AND TRANSPORT The receiver and it’s accessories are delivered in a protective packaging. This packaging is designed to protect against excessive shocks and not against ingress of moisture. 1.1. STORAGE If necessary: ■ store the receiver in it’s original protective packaging; ■ in a room with the ambient conditions as stated in the technical specifications. 2 1.2. TRANSPORT Pack the receiver preferably in the original packaging or in an equally protective packaging. This is to help avoid possible damage to the receiver’s electronics. 2. TO UNPACK YOUR RECEIVER DANGER KEEP AWAY THE PLASTIC PACKAGING FROM CHILDREN. THE PLASTIC PACKAGING MAY CLING TO NOSE AND MOUTH AND PREVENT BREATHING. © 2002 EchoStar International Corporation All rights reserved When you unpack the contents of the box, confirm that all the parts are included. Refer to Chapter 3. The contents of the box. Unpack the contents of the box carefully. Electronic equipment as satellite receivers are easily damaged when you handle it roughly. Examine all parts for damage that may have occurred during shipment. If you find any damage, stop to unpack the box and call the retail seller where you bought the receiver. To help avoid possible damage to the receiver’s electronics, allow the receiver to adapt to the ambient temperature and humidity level. This to avoid condensation caused by a sudden change in temperature (e.g from a hot car into a cool room). 3. THE CONTENTS OF THE BOX The box contains: ■ A receiver; ■ A remote control unit; ■ A pair of batteries (for the remote control unit); ■ A loop through cable; ■ A set of documentation. 4. THE DISPOSAL OF YOUR PACKING MATERIALS CAUTION It is recommended to keep the packaging materials for a period of time. In case of warranty claims, we can request to return the receiver in the original packaging to protect the electronics and hard disk drive. Failing to do so might void the warranty. Most of the packaging materials can be recycled. Please discard these materials in an environmental safe manner ENVIRONMENTAL REMARK Dispose the packaging in an environmental safe manner. Please inform yourself on local regulations with respect to the disposal of reusable materials. Digital Satellite Receiver Page 2 - 1 Section 2 5. Preparation TO SETUP YOUR PERIPHERAL EQUIPMENT Please refer to the user manuals of your terrestrial antenna, dish, TV, video recorder and/or audio equipment to make sure this equipment is properly installed and configured before you install the receiver. EchoStar recommends that you follow at least the following instructions: 5.1. THE TERRESTRIAL ANTENNA 1. Make sure: ■ The terrestrial antenna is in good condition and well aligned for the best reception (avoid corroded contacts); ■ The UHF coaxial cable is in a good condition (no excessive bends or damaged insulation); ■ The UHF coaxial cable connections are well shielded (metal connectors). 2. If necessary, do any work. 5.2. THE DISH 5.3. THE TV, VIDEO RECORDER AND AUDIO EQUIPMENT 1. Make sure: ■ Safe access to the connections is available; ■ The equipment is switched off; ■ It is safe to remove and install the cables. 2. If necessary, do any work. 6. TO SETUP THE RECEIVER You can install the receiver safely in a convenient location if you adhere to the warning: WARNING DO NOT INSTALL THE RECEIVER: ■ in a closed or poorly ventilated cabinet; ■ directly on top of or under another equipment; ■ on a surface which will obstruct the ventilation slots. DO NOT EXPOSE THE RECEIVER AND IT’S ACCESSORIES: ■ to rain or excessive moisture to avoid the risk of shock or permanent damage to your receiver; ■ to direct sunlight, heaters, stoves or any other heat generating equipment; ■ to any magnetic objects, such as speakers, electric motors, transformers, etc.; ■ to excessive vibration. Page 2 - 2 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved 1. Make sure: ■ The outdoor components of the dish are good condition; ■ The dish is well aligned for the best reception; ■ The dish is connected with the correct RF coaxial cable (75 Ohm) and connectors; ■ The cables from the dish are in a good condition (no excessive bends or damaged insulation). 2. If necessary, do any work. Installation Section 3 INSTALLATION 1. CONNECT YOUR EQUIPMENT It is possible to connect the different equipment with the use of UHF coaxial cables, SCART cables, and/or so called audio/video cables with RCA connectors. WARNING ALL EQUIPMENT INVOLVED IN THE INSTALLATION TASK MUST BE INSTALLED CORRECTLY AND SWITCHED OFF. MAKE SURE THAT IT IS SAFE TO PROCEED WITH THE INSTALLATION UNSAFE CIRCUITS AND INSTALLATIONS CAN CAUSE (SERIOUS) INJURY OR DAMAGE TO EQUIPMENT. TASK. CONNECTION WITH UHF COAXIAL CABLES 1. On the TV, find the UHF-coaxial cable that is connected to the terrestrial antenna or cable network. 2. Remove the UHF-coaxial cable from the TV and make sure the cable condition is OK. 3. On the rear panel of the receiver find the TV OUT connector. 4. Install an UHF-coaxial cable between the TV OUT connector (receiver) and the antenna connector (TV). 5. On the rear panel of the receiver find the ANT IN connector. 6. Install the UHF-connector (terrestrial antenna) to the ANT IN connector (receiver). © 2002 EchoStar International Corporation All rights reserved CONNECTION WITH SCART CABLES 1. 2. 3. 4. On the TV find the SCART cable that is connected to the VCR. Remove the SCART connector that is connected to the VCR from the TV. On the rear panel of the receiver find the DECODER, TV and VCR SCART connectors. Install a full featured SCART cable between the decoder and the DECODER SCART connector (receiver). 5. Install a full featured SCART cable between the VCR and the VIDEO SCART connector (receiver). 6. Install a full featured SCART cable between the TV SCART connector (receiver) and the SCART connector on the TV (old SCART connection to the VCR). CONNECTION WITH AUDIO/VIDEO CABLE (RCA-CONNECTORS) 1. On the rear panel of the receiver find the VIDEO, AUDIO L and AUDIO R connectors. 2. Install an audio/video cable between: a. the VIDEO connector of the receiver and TV (yellow); b. the AUDIO L connector of the receiver and TV (white); c. the AUDIO R connector of the receiver and TV (red). CONNECTION WITH DOLBY DIGITAL AUDIO CABLE (RCA-CONNECTORS) 1. On the rear panel of the receiver find the S/PDIF connector. 2. Install an audio/video cable (black) between: a. the S/PDIF connector (receiver) and Dolby Digital connection of the Dolby digital compatible installation. CONNECTION WITH SERIAL CABLE (0-MODEM CABLE) 1. On the rear panel of the receiver find the SERIAL PORT connector. 2. Install a serial cable between the SERIAL PORT connector (receiver) and the serial port connection of the PC. CONNECTION WITH USB CABLE 1. On the rear panel of the receiver find the USB connector. 2. Install a serial cable between the USB connector (receiver) and the USB connection of the PC. Digital Satellite Receiver Page 3 - 1 3 Section 3 Installation . CONNECT A DISH It is possible to connect the different dish configurations with the use of RF coaxial cables. Only the most common configurations are discussed. If in doubt, please ask the EchoStar service department for advice. WARNING ALL EQUIPMENT INVOLVED IN THE INSTALLATION TASK MUST BE INSTALLED CORRECTLY AND SWITCHED OFF. MAKE SURE THAT IT IS SAFE TO PROCEED WITH THE INSTALLATION TASK. UNSAFE CIRCUITS AND INSTALLATIONS CAN CAUSE (SERIOUS) INJURY OR DAMAGE TO EQUIPMENT. CAUTION Tighten the cable connectors only by hand. Do not use any tools. You will damage the connector pins if you overtighten the connector. This will result in loss of signal quality, or even total loss of reception. 1. On the dish installation, connect a RF cable (for detailed instructions, refer to the manufacturer’s instructions). 2. On the rear panel of the receiver find the LNB IN (digital), the IF OUT and the LNB IN ANALOG connectors. FIXED DISH INSTALLATION WITH LNB(F) 3. Install the F-connector (dish) to the LNB IN connector (receiver). 4. Install the delivered loop through cable between the IF OUT connector (receiver) to the LNB IN ANALOG connector (receiver). Page 3 - 2 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved 2. Installation Section 3 FIXED DISH INSTALLATION WITH DISEQC SWITCH 3. Install the F-connector (DiSEqC switch) to the LNB IN connector (receiver). 4. Install the delivered loop through cable between the IF OUT connector (receiver) to the LNB IN ANALOG connector (receiver). MOTORIZED DISH INSTALLATION WITH LNB(F) 1. On the dish installation (for detailed instructions refer to the manufacturer’s instructions): a. connect a RF cable; b. connect the power and sensor cables; c. if present, set the East and West limit switches to prevent dish damage. 2. On the rear panel of the receiver find: a. the LNB IN (digital), the IF OUT and the LNB IN ANALOG, connectors; b. the M.PULSE, the GND, the M1 and the M2 connectors. 3. Install the F-connector (dish) to the LNB IN connector (receiver). 4. Install the delivered loop through cable between the IF OUT connector (receiver) to the LNB IN ANALOG connector (receiver). 5. On the rear panel of the receiver find the M.PULSE, the GND, the M1 and M2 connectors. 6. First install the motor sensor cables to the M.PULSE and GND connector (receiver). 7. Install the motor power cable to the M1 and M2 connectors (receiver). © 2002 EchoStar International Corporation All rights reserved DISH INSTALLATION WITH FERRITE FEED 1. On the dish installation, connect the ferrite cables (for detailed instructions refer to the manufacturer’s instructions). 2. On the rear panel of the receiver find the Ferrite + and the Ferrite - connectors. 3. Install the ferrite power cable to the Ferrite + and Ferrite - connectors (receiver). DISH INSTALLATION WITH POLAROTOR 1. On the dish installation, connect the polarotor cables (for detailed instructions refer to the manufacturer’s instructions). 2. On the rear panel of the receiver find the + 5V, the GND and the SKEW connectors. CAUTION It is possible that the GND connector is already occupied by the motor sensor cable. If you need to connect the GND for the polarotor as well, please use the appropriate connection materials to connect both cables. Failing to do so can cause damage to the equipment. 3. Install the polarotor power cable to the + 5V and GND connectors (receiver). 4. Install the polarotor skew cable to the SKEW connector (receiver). Digital Satellite Receiver Page 3 - 3 3 Section 3 3. Installation TO SETUP YOUR RECEIVER FOR THE FIRST TIME This procedures will guide you step-by-step through the initial setup of the receiver. After you have finished the initial installation, these pages are accessible through the icons in the menu bar which is in the initial setup not shown. NOTE Unless otherwise specified; This note explains the way you can navigate through the pages of the EchoNAV initial setup menu. 1. Use the OK key to pull down the menu selection fields. 2. Use the arrow keys to go through the selectable menu items. 3. In a pull-down menu, use the OK key to confirm the selection. 4. Use thearrow keys to navigate between the left and right column of selectable menu items. 5. Use the EXIT key to leave the menu and return to the live mode. 1. Switch on the TV. 2. On the receiver, press the on/standby button. The receiver display shows: - first a moving dot; - then it shows - - - ■ The TV shows the first page. Make the required selections. Read the available help text for information. Go to the Continue field. On the RCU, press the OK key to advance. © 2002 EchoStar International Corporation All rights reserved 3. 4. 5. 6. ■ 7. Make the required selections. 8. Read the available help text for information. Note that only the white fields are selectable, other fields show reference information. 9. Go to the Continue field. 10. On the RCU, press the OK key to advance. 11. Make the required selections. 12. Read the available help text for information. 13. Go to the Continue field. 14. On the RCU, press the OK key to advance. Page 3 - 4 EchoStar DVR-7000 Viaccess Installation Section 3 NOTE The receiver needs the correct local time to collect and show the EPG (Electronic Program Guide). An incorrectly entered local time will result in no EPG information. 15. Make the required selections. 16. Read the available help text for information. 17. On the RCU, use thekeys to select. 18. Go to the Press OK to set the time. Note that the local time is shown correctly. 19. On the RCU, press the OK key to advance. 20. Go to the Continue field. 21. On the RCU, press the OK key to advance. 3 © 2002 EchoStar International Corporation All rights reserved NOTE From the next step onwards, the procedure is divided in different configurations. The configurations are; Fixed, Motorized and SMATV. ■ Fixed means set up either a single dish, multiple dishes with DiSEqC switch; ■ Motorized means set up a moveable dish (motor/actuator by positioner); ■ SMATV means set up for television distribution (cable network in buildings). FOR FIXED AND DISEQC 1..4 SWITCH INSTALLATIONS 22. Make the required selections. 23. Read the available help text for information. Note that only the white fields are selectable, other fields show reference information. 24. Go to the Check Signal field. 25. On the RCU, press the OK key to advance. 26. Wait for the Checking Configuration to complete. 27. Make the required selections. 28. Read the available help text for information. 29. If the red dot in the transponder field stays: a. select another transponder; b. go to the check signal field; c. on the RCU, press the OK key. 30. Go to the Search Channels field. 31. On the RCU, press the OK key to advance. Digital Satellite Receiver Page 3 - 5 Section 3 Installation 32. Wait for the search to complete: a. the receiver display shows a moving dot; b. the search completed popup menu appears. 33. On the RCU, press the OK key. to end the initial setup procedure. FOR MOTORIZED INSTALLATIONS - AUTOSAT CAUTION On the motorized dish, set the physical East and West limit switches first. Failing to do so might cause damage to your motorized dish installation or other properties. © 2002 EchoStar International Corporation All rights reserved 22. Make the required selections. 23. Read the available help text for information. Note that only the white fields are selectable, other fields show reference information. 24. Go to the Autosat field. 25. On the RCU, press the OK key to advance. 26. On the RCU: a. press thekey to set the East limit; b. at the motor error, press thekey once; c. press the OK key. 27. On the RCU, press the OK key. 28. Select a Eastern satellite which you can receive. 29. When in the location field: a. press and hold thekey and watch the signal indicator for an indication; b. in the signal indicator, make sure a network name is shown; c. press thekey to select another transponder for signal verification; d. use thekey to fine tune for the best signal level and quality; e. press thekey to select the location bar; f. press the OK key, note that the saved position of the satellite is shown. 30. Repeat the procedure for the middle and Western Satellite. 31. Set the West limit (key), refer to step 26. 32. Go to the Autosat field. 33. On the RCU, press the OK key to advance. Page 3 - 6 EchoStar DVR-7000 Viaccess Installation Section 3 34. Make the required selections. 35. Read the available help text for information. 36. Go to the Search Channels field. 37. On the RCU, press the OK key to advance. © 2002 EchoStar International Corporation All rights reserved 38. Wait for the search to complete: a. the receiver display shows a moving dot; b. the search completed popup menu appears. 39. On the RCU, press the OK key. to end the initial setup procedure. 3 FOR MOTORIZED INSTALLATIONS - MANUAL SELECTION CAUTION On the motorized dish, set the physical East and West limit switches first. Failing to do so might cause damage to your motorized dish installation or other properties. 22. Make the required selections. 23. Read the available help text for information. Note that only the white fields are selectable, other fields show reference information. 24. Go to the Set Limits field. 25. On the RCU, press the OK key to advance. 26. On the RCU: a. press thekey to set the East limit; b. at the motor error, press thekey once; c. press the OK key. 27. On the RCU: a. press thekey to set the West limit; b. at the motor error, press thekey once; c. press the OK key. 28. Go to the Program Satellites field. 29. On the RCU, press the OK key to advance. Digital Satellite Receiver Page 3 - 7 Section 3 Installation 30. Make the required selections. 31. Read the available help text for information. 32. Go to the Search Channels field. 33. On the RCU, press the OK key to advance. 34. Wait for the search to complete: a. the receiver display shows a moving dot; b. the search completed popup menu appears. 35. On the RCU, press the OK key. to end the initial setup procedure. © 2002 EchoStar International Corporation All rights reserved FOR SMATV INSTALLATIONS 22. Make the required selections. After the initial installation it is possible to add more symbol rates. Refer to section Maintenance for detailed instructions. 23. Read the available help text for information. 24. Go to the Check Signal field. 25. On the RCU, press the OK key to advance. 26. Wait for the search to complete: a. the receiver display shows a moving dot; b. the search completed popup menu appears. 27. On the RCU, press the OK key to end the initial setup procedure. Page 3 - 8 EchoStar DVR-7000 Viaccess Familiarization Section 4 FAMILIARIZATION 1. THE RECEIVER The digital satellite receiver has 2 Common Interface slots. The front panel gives you the control over the basic functions. The rear panel gives you various connections to connect the audio and video equipment as well as a terrestrial and dish antenna. Ventilation slots in the housing are provided for cooling of the internal electronics. The software of the receiver contains the EchoNAV user interface with on-screen help, which gives you easy control over the features of the receiver. The software contains also a large database of pre-programmed satellites and transponders which are used for a quick installation. For initial installation, the software guides you through the required setup menu to allow for an easy and reliable installation setup of the receiver. FEATURE HIGHLIGHTS ■ Multilingual Advanced User Interface (12+ languages); ■ Embedded Viaccess 1.1; ■ 40 Gbyte Low Noise Audio/Video Hard Disk Drive; ■ Digital Audio/Video Recording with Slow Motion, Pause, FF, Rew; ■ Pause Live Video; ■ MP3 Player, 500 Songs (typical.)/USB Port; ■ 6 Week EPG (Saved on Hard Disk); © 2002 EchoStar International Corporation All rights reserved ■ 5,700 Channels, 100 Satellites, 1,300 Transponders; 4 ■ 8 Favorite Lists for each Mode (TV, Radio, DVR, MP3); ■ Powerful Channel Sorting and Grouping; ■ Multiple Scan Modes (incl. Update Scan); ■ Digital Audio Output (Dolby Digital Compatible); ■ Integrated High Power Positioner (36 Volt, 5 Amp.); ■ Software Updates via Internet/Satellite (OTA). 1.1. THE RECEIVER FRONT PANEL The front panel has: ■ The display, to show the clock or the actual status of the receiver; ■ The ■ ■ ■ ■ key, to switch the receiver to on or stand-by; The MENU key, to get access to the EchoNAV installation menu; The OK key, to get access to the EchoNAV mode and selection menu; The arrow keys, to navigate left, up, right and down through the selectable options; The access door, to access the different slots for the CI-modules and smart cards. Digital Satellite Receiver Page 4 - 1 Section 4 Familiarization 1.2. THE RECEIVER REAR PANEL The rear panel gives you various connections to connect the audio and video equipment as well as a terrestrial and dish antennas. Depending on the installation setup, you may not use all connectors, but they are provided for any desired setup in future. The VCR connector (SCART), for the connection of a VCR with the use of a fully-featured SCART-cable; The DECODER connector (SCART), for the connection of a decoder with the use of a fully-featured SCART-cable; The TV connector (SCART), for the connection of a TV with the use of a fully-featured SCART-cable; The 0/12V connector (RCA), for the connection of a remote switch; The FERRITE + connector (spring-clip), for the connection to the + terminal of a magnetic polarotor (Ferrite); The FERRITE - connector (spring-clip), for the connection to the - terminal of a magnetic polarotor (Ferrite); The M1 connector (spring-clip), for the line 1 connection of a motor or actuator (for motorized/actuated dishes); The M2 connector (spring-clip), for the line 2 connection of a motor or actuator (for motorized/actuated dishes); The M.PULSE connector (spring-clip), for the connection of the feedback sensor (for motorized/actuated dishes); The +5V connector (spring-clip), for the connection of the power terminal of a polarotor; The GND connector (spring-clip), for the connection of the ground terminal of the feedback sensor and the polarotor; ■ The SKEW connector (spring-clip), for the connection of the skew terminal of a polarotor; Page 4 - 2 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved The available connectors on the rear panel are: ■ The LNB IN connector (F-type), ■ for the connection of a dish to the receiver, to receive the digital broadcasts; ■ The IF OUT DIGITAL connector (F■ type), for the connection of a loop through cable; ■ The LNB IN ANALOG connector (F■ type), for the connection of a dish to the receiver, to receive the analog broadcasts; ■ The S/PDIF connector (RCA), ■ for the connection of Dolby Digital (AC-3) compatible audio equipment; ■ The VIDEO connector (RCA), ■ for the connection to the composite video input of the TV (monitor); ■ The AUDIO L connector (RCA), ■ for the connection of the left audio input channel of a stereo set; ■ The AUDIO R connector (RCA), ■ for the connection of the right audio input channel of a stereo set; ■ The ANT IN connector (IEC), ■ for the connection of an terrestrial TV antenna; ■ The TV OUT connector (IEC), ■ for the connection to the antenna connector of a TV or a VCR; ■ The SERIAL PORT connector (sub-D), ■ for the connection to the serial communication port of a PC; ■ The USB connector (slave USB), ■ for the connection to an operational USB port of a PC; Familiarization Section 4 1.3. THE REMOTE CONTROL UNIT (RCU) ■ ■ ■ ■ ■ ■ ■ ■ © 2002 EchoStar International Corporation All rights reserved ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ The EchoStar Quattro is a programmable RCU that also can control your TV, VCR, DVD and/or Audio set. The EchoStar Quattro requires two AA/R6 alkaline batteries to operate. ON/STANDBY ■ MUTE To switch to standby or on. To blank out the volume. VCR ■ AUX To control the VCR. To control the Audio Set or DVD. TV To control the TV. ■ SAT To control the receiver. EPG To view the EPG. ■ i To view the InfoBanner; MENU To view detailed EPG To go to the installation menu. information. VOL+ ■ Satellite Dish To increase the volume. To select another satellite. VOL■ CH+ To decrease the volume. To go one channel up. ARROW CLUSTER ■ CHTo scroll left, up, right or down. To go one channel down. EXIT ■ OK To leave a menu or feature. To go to the (favorites) lists; PAGE+ To make a menu selection; To go one page up. To pull down a selection menu. PAGE ■ PREVIOUS To go one page down. To go to the previous channel; ALT AUDIO To access special features. To choose a language. ■ ? ALT SUBTITLE Not used for Sat-mode. To choose a subtitle. ■ V (white) STOP To edit a list To stop the recording or play ■ PLAY back of an event; To play back a recorded event. To return to actual time in the ■ FAST FORWARD EPG window To go to the end of an REWIND recorded event fastly. To go to the beginning of an ■ PAUSE recorded event fastly. To pause the playback of an RECORD (press twice) event; To record a live program. To pause a live program. SKIP BACKWARD ■ SKIP FORWARD Not used for Sat-mode. Not used for Sat-mode. GREEN ■ YELLOW To select a (favorites) list. To group a list; RED To select an EPG timer. To go to another mode. ■ BLUE NUMBER KEYS To sort a list; To enter numerical settings; To zoom in/out the time slot of To type in a channel number. the EPG view window. TV/RAD ■ FAV To switch to TV or Radio To go to the favorite list of the mode. actual mode. Digital Satellite Receiver Page 4 - 3 4 Section 4 Familiarization 1.4. THE ECHONAV USER INTERFACE The EchoNAV user interface is designed to give you easy control over the receiver. The EchoNAV user interface has four main features that give access to the different functions. The four main features are: ■ The EchoNAV installation menu, that helps you to setup the receiver and access the parental lock settings; ■ The EchoNAV user menu, that helps you to control the daily operation and selection of the favorites; ■ The EchoNAV EPG menu, that helps you to control the different timers and to view the available EPG; ■ The EchoNAV InfoBanner, that helps you to view the available information about the actual mode. The EchoNAV user interface has various ways to navigate through the menus and functions. Some of the keys on the remote control unit give direct access to functions. The most important keys are identified as EPG, colored keys, MENU, OK and record (press twice). Other keys are multi-functional which means that their function changes dependent of the mode that you are in. NOTE 2. THE ECHONAV INSTALLATION MENU The EchoNAV installation menu has different main menus that give you access to the different sub menus. The main menus are: ■ The guided initial setup menu which is only accessible after the first time you switch the receiver on and after every manually initiated factory reset; ■ The User Preferences menu, the installation setup menu and the CI menu are accessible at any time. NAVIGATION A highlighted button shows you which (main/sub) menu is selected. The MENU key lets you change between the main and sub menu where thekeys let you make a selection in the selected (main/sub) menu. The OK key brings you into the related page, where you can make a choice from the available options. NOTE Once in a page, at any time: ■ you can use the MENU key to reverse from a menu page to the sub menu bar; ■ you can easily leave with the EXIT key. Page 4 - 4 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved Unless otherwise specified; this note explains the way you can navigate through the pages of the EchoNAV user menu. 1. Use the OK key to pull down the menu selection fields. 2. Use the keys to scroll the selectable items. 3. Use the keys to navigate between the left and right column of selectable items. 4. Use the EXIT key to leave the menu and return to the view mode. 5. In a pull-down menu: - use the OK key to confirm the selection. - the yellow bar indicates the active selection; - on the left, the green page indicator indicates where you are.. Familiarization Section 4 The main menus are divided in sub menus, selection pages and option fields. The main menu buttons are shown at the right hand side of the menu bar. The different sub menu buttons are shown on the left hand side of the menu bar. The selection pages with the option fields are accessible after you have selected a sub menu. Every menu, sub menu and selection page has one or more help lines to assist you. The main menus are accessible with: ■ The button, that gives you access to the User Preferences menu. ■ The button, that gives you access to the installation setup menu. ■ The button, that gives you access to the Conditional Access menu. 2.1. THE USER PREFERENCES MENU © 2002 EchoStar International Corporation All rights reserved This main menu has different sub menus that give access to the pages where you can customize the factory settings. The user preferences menu always comes in view with the User Profile sub menu. In the menu bar the sub menus are shown at the right side. The available sub menus are shown as icons which become a highlighted button after selection. The sub menus are accessible with: ■ The button, that gives you access to the User Profile page. ■ The button, that gives you access to the Languages page. ■ The button, that gives you access to the Parental Lock page. ■ The button, that gives you access to the Local Time page. ■ The button, that gives you access to the TV System page. Digital Satellite Receiver Page 4 - 5 4 Section 4 Familiarization 2.1.1. USER PROFILE PAGE This menu page allows you to customize the user profile, you can customize: ■ Aspect ratio To set the screen size of the TV. ■ Banner time out To set the view time for the InfoBanner. ■ Dolby Digital To tell the receiver that it is connected to a Dolby Digital amplifier or not. ■ Backgrounds To select the standard or a personal background. 2.1.2. LANGUAGES PAGE 2.1.3. PARENTAL LOCK PAGE The parental lock menu is initial accessible with the factory default PIN code 0000. For future use, you are requested to change the PIN code to your own personal code. This sub menu contains two menu pages. These menu pages are: TO CHANGE THE PARENTAL LOCK SETTINGS This menu page allows you to customize the parental lock settings, you can customize: ■ Receiver Lock To lock the receiver completely for unauthorized users. ■ Installation Lock To lock the installation menu for unauthorized users. ■ Channel lock To lock or unlock all locked selections at once. ■ Master hide To hide or unhide all hidden selections at once. ■ Change PIN Code To access the change PIN code page. Page 4 - 6 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved This menu page allows you to customize the language settings, you can customize ■ Menu Language To set the language you want to use in the menus. ■ Main audio language To set language for programs with bi-lingual audio. ■ 2nd audio language To set language for programs with bi-lingual audio. ■ Subtitling language To set language for bi-lingual subtitled programs. ■ 2nd subtitling language To set language for bi-lingual subtitled programs. Familiarization TO CHANGE THE Section 4 PIN CODE This menu page allows you to change the PIN code, you can change: ■ Old password To type in the factory default or personal PIN code. ■ New password To type in your new PIN code (numbers only). ■ Verify password To type in your New password again. Now the receivers verifies the new password to make sure that you typed in the new password correctly. © 2002 EchoStar International Corporation All rights reserved 2.1.4. LOCAL TIME PAGE This menu page allows you to customize the local time settings. For the correct operation of the EPG and the timers, it is necessary to set the local time correctly. You can customize: ■ Selected time zone To set the time zone where you are. ■ Year To set the actual year. ■ Month To set the actual month. ■ Date To set the actual date. ■ Day To set the actual day. ■ Hour To set the actual time in hours. ■ Minute To set the actual time in minutes. ■ Press OK to set the time To confirm the settings you made. 2.1.5. TV SYSTEM PAGE This menu page allows you to customize the TV settings used for the receiver, you can customize: ■ Channel To select the (UHF) TV channel to which the receiver is connected. ■ CH Frequency To view the frequency that corresponds with the selected channel. You can not set this option. ■ System To set the video format supported by your TV. Digital Satellite Receiver Page 4 - 7 4 Section 4 Familiarization 2.2. THE INSTALLATION SETUP MENU This main menu has different sub menus that give access to the pages where you can customize the settings to match your personal requirements. Note that the sub menus are dynamic which means that they change with the selections you make. The installation setup menu always comes in view with the system setup sub menu. In the menu bar the sub menus are shown at the right side. The available sub menus are shown as icons which become a highlighted button after selection. The sub menus are accessible with: button, that gives you access to the System Setup page (for Fixed dish). ■ The button, that gives you access to the System Setup page (for motorized dish). ■ The button, that gives you access to the Program Satellites page (for motorized dish). ■ The button, that gives you access to the User LNB Setting page. ■ The button, that gives you access to the About EchoStar information page. ■ The button, that gives you access to the System Upgrade page. ■ The button, that gives you access to the Factory Reset page. SIGNAL AND EL-WL INDICATOR In some menus the signal indicator is shown to help you to find a satellite and fine tune for the best signal level and quality. In some menus (motorized only), an EL-WL indicator is shown to show you what the East and West limits are that you have set for the dish installation, also the position of the searched satellites is shown. ■ The signal indicator The top bar shows the signal level to indicate that you receive a signal. The bottom bar shows the quality of the signal (signal-to-noise ratio) to indicate that you have a lock onto the selected transponder. The bottom text gives the satellite and network information to which the lock is established. ■ The EL-WL indicator (motorized only) EL and WL show you the calculated East and West Limits. The Indication in the EL-WL indicator show you the calculated position of the searched satellites. Note that this indicator can also show in the TV or Radio mode as part of the InfoBanner. Page 4 - 8 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved ■ The Familiarization Section 4 © 2002 EchoStar International Corporation All rights reserved 2.2.1. SYSTEM SETUP MENU This sub menu allows you to customize the system setup to match your installation. Note that the menu page is dynamic which means that it changes with the selections you make. You can customize: ■ System To set the dish type you use. ■ LNBs To set the amount of LNBs you have installed. ■ Polarity To set the device that controls the signal polarity. ■ Switch To set the switch type which you use to control the dish installation (if used). ■ LNB1 To set the LNB type(s) you use. ■ Method (motorized only) To set the scan method; AutoSat (automatically calculate the satellite positions from reference positions) Manual (enter the satellites by manual search). ■ AutoSat (motorized, AutoSat only) To confirm the selections you made and advance to the AutoSat setup page (AutoSat only) ■ Set Limits (motorized, manual only) To confirm the selections you made and advance to the Set Limits page. ■ Satellite (fixed only) To set the satellite you want to scan for the LNB. ■ Check Signal (fixed only) To confirm the selections you made and advance to the Check Signal page. ■ LNB Power (SMATV only) To select the distribution type (cable=Off, IF=On). ■ Symbol Rate 1-4 (SMATV only) To set the symbol rate you want to scan. ■ Search Channels (SMATV only) To confirm the selections you made and advance to the Search Channels page. Digital Satellite Receiver Page 4 - 9 4 Section 4 Familiarization 2.2.2. FIXED DISH SETUP This sub menu allows you to customize the system setup to add an additional fixed dish into your motorized configuration. Note that the menu page is dynamic which means that it changes with the selections you make. You can customize: ■ LNBs To set the amount of LNBs you have installed. ■ Polarity To set the device that controls the signal polarity. ■ Switch To set the switch type which you use to control the dish installation. ■ LNB1 To set the LNB type(s) you use. ■ Satellite To set the satellite you want to scan for the LNB. ■ Check Signal To confirm the selections you made and advance to the Check Signal page. 2.2.3. PROGRAM SATELLITES Page 4 - 10 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved This sub menu allows you to customize the system setup to add an additional satellite into your receiver. Note that the menu page is dynamic which means that it changes with the selections you make. You can customize and view: ■ Satellite To set the satellite you want to scan for the LNB. ■ Search mode To set a specific search mode (All, FTA, IF, TP, network or update). ■ Longitude To view the satellite location on the Clarke Belt. ■ Transponder To select a transponder of the selected satellite. ■ Skew To adjust the Horizontal/Vertical setting (only for polarotor). ■ Location To move the dish for best signal level and quality. ■ Satellite offset To compensate for a dish offset caused by ambient conditions. NOTE The satellite offset will affect all satellite positions, this means that all scanned positions will change which might result in total loss of signal for all satellites. ■ Search Channels To confirm the selections you made and advance to the Search Channels page. Familiarization Section 4 2.2.4. USER LNB SETTING This sub menu allows you to program a LNB that is not listed in the LNB selection list. Note that the menu page is dynamic which means that it changes with the selections you make. You can customize: ■ User’s LNB To select the first or second user defined LNB. ■ Low Frequency To enter the low frequency of the user LNB. ■ High Frequency To enter the high frequency of the user LNB. ■ Polarity Control To select the device that controls the polarity. ■ Band Control To set the control signal for high or low band selection. ■ Ku/C Control To set the control signal for the Ku/C LNB. ■ Store settings To confirm the selection and save the settings. © 2002 EchoStar International Corporation All rights reserved 2.2.5. ABOUT ECHOSTAR The About EchoStar menu gives all the where-to-contact-Information about EchoStar and the status information about the receiver. You can view: ■ Company This field shows the full name of EchoStar. ■ Address This field shows the address of EchoStar. ■ S/W version This field shows the current software version loaded into the receiver. ■ Boot version This field shows the current boot version loaded into the receiver. ■ Web site This field shows the EchoStar web site where you can find the latest user and software information. Digital Satellite Receiver Page 4 - 11 4 Section 4 Familiarization 2.2.6. SYSTEM UPGRADE PAGE This menu page allows you to upgrade the receiver’s software. EchoStar provides software updates Over-The-Air (OTA) which means that you can upgrade your system via the satellite. 2.2.7. FACTORY RESET The Factory Reset menu gives you the possibility to reset the receiver to the initial factory settings. The memory erase option restores the factory settings over your personal settings. All customized data like parental lock and favorites will be replaced with the factory settings. ■ Memory Erase - User Data To instruct the receiver to delete all personal settings and replace them with the factory settings, the PIN code is reset to the factory default 0000. ■ HDD Erase - Recordings To instruct the receiver to delete (only) all TV and Radio recordings from the hard disk. ■ HDD Erase - MP3 Songs To instruct the receiver to delete (only) all MP3 songs from the hard disk. ■ HDD Erase - Backgrounds To instruct the receiver to delete (only) all the personal backgrounds from the hard disk. ■ HDD Erase - EPG Data To instruct the receiver to delete (only) all scheduled EPG data from the hard disk. ■ Confirm Reset With this field you can confirm the selections made and execute the selected procedure. After the memory erase procedure is finished, you are taken to the initial setup procedure. (for detailed instructions, please refer to section 4). Page 4 - 12 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved If you are not able to receive the satellite/transponder, you always can upgrade the software through the SERIAL PORT (RS232) at the rear of the receiver and the downloaded software from the EchoStar website. ■ Location To select the default or user defined satellite where you want to download from. ■ Satellite To set the satellite where you want to download from. ■ TP frequency To set the transponder where you want to download from. ■ Polarity To set the correct polarity for the transponder. ■ Symbol rate To set the correct symbol rate for the transponder. ■ FEC To set the correct Forward Error Correction for the transponder Familiarization Section 4 2.3. THE CI INFORMATION MENU This main menu has different sub menus that give access to the pages where you can view the CI-module and smart card settings. Note that the sub menus are dynamic which means that they change with the selections you make. The conditional access information menu always comes in view with the system setup sub menu. In the menu bar the sub menus are shown at the right side. The available sub menus are shown as icons which become a highlighted button after selection. The sub menus are accessible with: The button, that gives you access to the CI-module 1 information page; The button, that gives you access to the CI-module 2 information page; The button, that gives you access to the Viaccess smart card reader information page. © 2002 EchoStar International Corporation All rights reserved 2.3.1. CI-MODULES The CI-modules sub menu gives all the Information about the CI-module and related smart card that is inserted. Note that the menu is dynamic which means that it changes with the type of CI-module and related smart card inserted. The menus for slots 1, 2 and 3 are almost identical, therefore only an example for slot 1 is shown. You can view: ■ Module Gives information about which CI-module and related smart card is inserted in the selected CI-slot. ■ Viaccess Embedded (smart card reader only) Gives information about which Viaccess compatible smart card is inserted in the Viaccess smart card reader. CONDITIONAL ACCESS INFORMATION ■ As an example; this page shows the additional information that is available from the inserted CI-module and smart card. ■ Note that this page can show differently for other CI-modules and smart cards. ■ EchoStar has no control over the information provided by the related service provider, therefor no specific information is given. Digital Satellite Receiver Page 4 - 13 4 Section 4 3. Familiarization THE ECHONAV MODE AND SELECTION MENUS 3.1. INTRODUCTION The mode and selection menu gives access to the current list, related features and on-screen help lines. After you have entered the mode and selection menu you can manipulate the lists through: ■ The Mode bar (red); ■ The List bar (green); ■ The Edit bar (white); ■ The Group bar (yellow); ■ The Sort bar (blue). 3.2. MODE 3.3. LIST The Lists are available in the all modes. Some of the lists are factory defined and other lists (Favorite lists) are user defined. Favorite lists are lists of your favorite items that are created and maintained by you. In every mode you can setup a number of favorite lists. The lists available are (mode dependent): ■ All Channels To access the list of scanned TV channels available on the scanned satellites. ■ Current Sat To access the list of all scanned TV channels available on the current selected satellite. ■ Favorites To access to your own favorite lists. You can rename the favorites to something meaningful to yourself, e.g. Film, Sport, Kids. Page 4 - 14 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved The Mode bar gives access to the different receiver modes. The receiver modes are: ■ TV To switch the receiver in the TV mode and to access the list of TV channels. ■ Radio To switch the receiver in the Radio mode and to access the list of Radio channels. ■ DVR To switch the receiver in the DVR mode and to access the list of DVR events. ■ MP3 To switch the receiver in the MP3 mode and to access the list of MP3 songs. ■ Lists To switch the receiver in the Lists mode and to access the favorite lists. Familiarization Section 4 © 2002 EchoStar International Corporation All rights reserved 3.4. EDIT The Edit options are available in the all modes. The Edit option gives you the possibility to customize the different lists. The availability of the Edit options is mode dependent, the available options are: ■ None No edit option is selected. ■ Move To enter the move channel function. ■ Add To enter the add channel function. ■ Rename To enter the rename channel function. ■ Volume To enter the set volume offset function. ■ Lock To enter the lock channel function. ■ Delete To enter the delete channel function. ■ Edit PID To enter the edit PID function. ■ Add PID To enter the add PID function. ■ Edit TP To enter the edit TP function. ■ Add TP To enter the add TP function. ■ Add SAT To enter the add SAT function. 3.5. GROUP The Group options are available in the all modes. The Group option allows you to group the lists in different ways. The availability of the Group options is mode dependent, the available options are: ■ None No group option is selected. ■ Per Satellite To group the list per satellite. ■ Per Network To group the list per network. ■ Per Transponder To group the list per transponder. (MP3 mode only) None No group option is selected. ■ Per Genre To group the list per genre. ■ Per Artist To group the list per artist. ■ Per Album To group the list per album. ■ Digital Satellite Receiver Page 4 - 15 4 Section 4 Familiarization 3.6. SORT The Sort options are available in all modes. The Sort options allow you to sort the lists in different ways. The availability of the Sort options is mode dependent, the available options are: ■ None No sort option is selected. ■ A to Z Sorts a list alphabetically. ■ Z to A Sorts a list alphabetically, in reverse order. ■ Character Shows list with entered character only. ■ Word Shows a list that contains the selected word only. ■ Scrambled Shows a list of encrypted channels only. ■ FTA Shows a list of Free-To-Air channels only. ■ Locked Shows a list of locked channels only. THE ELECTRONIC PROGRAM GUIDE (EPG) Most digital channels transmit program data as an EPG. Digital channels that transmit EPG offer you program information in advance for a certain period of time. Dependent of the service provider, EPG is offered in different ways. After you have entered the EPG, you can select the different EPG options, these are: ■ Mode, to select the TV or Radio mode to show. ■ List, to select the list in all channels, current satellite or personal favorite. ■ Date, to access the EPG calendar. ■ Timers, to select and set the VCR or Reserved timer. ■ Zoom, to expand or shrink the EPG window as a function of the time slot. Page 4 - 16 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved 4. Familiarization Section 4 4.1. THE TIMERS The event timers are a kind of alarm clock. An event timer reminds you when a timed program or recording starts. You can set the next timers: ■ DVR timer, to automatically record a program onto the hard disk. ■ VCR timer, to automatically switch over to the timed program before it really starts. This allows you to record a program on a video tape (video recorder); ■ Reserved timer, to automatically switch over to the timed program before it really starts or when the receiver is in standby, to switch on the receiver. © 2002 EchoStar International Corporation All rights reserved If a timer is set on a program that is shown in the EPG, the relevant data is already shown in the timer. You can change the settings as follows: ■ Date, to set the start date for the timer; ■ Start time, to set the start time in hours/minutes; ■ Stop time, to set stop time in hours/minutes; ■ Period, to set the timer once or repeat for every occurrence; ■ Favorite list, to select a list where to save the recording (none saves into the all files list). ■ Parental lock, to lock or hide the recording automatically. ■ Status, to set (active) or delete (inactive) the timer. ■ Store settings, to program the timer. Timers are shown in the EPG window as clocks. In the List-Timers page, it is possible to get a list of the timers that are set. In this page you also can change or delete a set timer. You can view an overview of all the timers that are set if you select the timers list. Digital Satellite Receiver Page 4 - 17 4 Section 4 5. Familiarization THE INFOBANNER AND POP-UP MENUS 5.1. THE TV INFOBANNER The TV InfoBanner shows the information related to the actual channel. The information shown is (some information only if provided by the service provider). ■ The channel information bar, to show the (favorites) list number and the channel name; ■ The satellite information dish, to show the name of the selected satellite; ■ The program information bar, to show the start time, duration indicator and program name; ■ The i-button, to indicate that there is detailed program information available; ■ The additional information bar, to show the additional service icons. These icons show only if the additional service is available. The icons are: icon for teletext; - the icon for alternate audio; - the icon for alternate subtitling; - the © 2002 EchoStar International Corporation All rights reserved - the icon for Dolby Digital audio; - the icon for Favorite channel; - the icon for Parental rating information. ■ The digital clock, to show the actual local time; ■ The next program information bar, to show the information of the next program. ■ If the volume +/- key is pressed, the volume button is shown (see the radio InfoBanner). ■ If the mute key is pressed, the volume button is shown with a red indicator. 5.2. THE RADIO INFOBANNER The radio InfoBanner shows the information related to the actual channel. The radio InfoBanner can show the same information as discussed with the TV InfoBanner. Page 4 - 18 EchoStar DVR-7000 Viaccess Familiarization Section 4 5.3. THE DVR INFOBANNER The DVR InfoBanner shows the information related to the actual recording. The information shown is (some information only if provided during the recording by the service provider). ■ The recording information bar, to show the name of the recording; ■ The jog shuttle, to show the actual status of the DVR (rewind, reverse slow motion, pause, play, fast forward and record); ■ The progress information bar, to show the start time and duration indicator; ■ The i-button, to indicate that there is detailed program information available; ■ The speed indicator to show the (re)wind and slow motion speed; © 2002 EchoStar International Corporation All rights reserved ■ The menu bar, to show the special functions. The special functions are: - the button, to mark a scene with an index marker; - the button, to repeat the recording continuously; - the button, to repeat all the recordings from the selected (favorite) list; - the button, to mark and repeat a scene continuously; - the button, to capture an image as a personal background. 4 5.4. THE MP3 INFOBANNER The MP3 InfoBanner shows the information related to the actual MP3 song. ■ The song information bar, to show the name of the recording; ■ The jog shuttle, to show the actual status of the MP3 player (rewind, pause, play and fast forward); ■ The progress information bar, to show the start time and duration indicator; ■ The i-button, to indicate that there is detailed information available; ■ The bass and treble indicators and the control button (alt audio key); ■ The menu bar, to show the special functions. The special functions are: - the button, to repeat the list in a random order; - the button, to repeat the song continuously; - the button, to repeat all the songs from the selected (favorite) list; - the button, to mark and repeat a song fragment continuously; Digital Satellite Receiver Page 4 - 19 Section 4 Familiarization 5.5. POP-UP MENUS Some pop-up menus are used to show that the receiver is busy to execute a task. Other popup menus require interaction with the user, you have to confirm or deny a earlier given command to complete the task 5.5.1. ALT AUDIO If transmitted, you can set per channel your alternate audio. You can call up the pop-up menu with the alternative audio key on the remote control unit. You can navigate up and down between the audio languages or left and right for bi-lingual programs. For the radio channels, you can navigate up and down between the different radio stations within the selected channel. 5.5.2. SUBTITLE 5.5.3. SATELLITE LIST This pop-up menu gives you the possibility to choose directly from the available satellites. You can call up the pop-up menu with the satellite key on the remote control unit. Page 4 - 20 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved If transmitted, you can set per channel your subtitling You can call up the pop-up menu with the subtitle key on the remote control unit. You can navigate up and down between the languages. Operation Section 5 OPERATION 1. TO NAVIGATE THROUGH THE MENUS NOTE Unless otherwise specified; this note explains the way you can navigate through the pages of the EchoNAV user menu. 1. Use the OK key to pull down the menu selection fields. 2. Use the keys to scroll the selectable items. 3. Use the keys to navigate between the left and right column of selectable items. 4. Use the EXIT key to leave the menu and return to the view mode. 5. In a pull-down menu: - use the OK key to confirm the selection. - the yellow bar indicates the active selection; - on the left, the green page indicator indicates where you are. NOTE In the following procedures, we assume that you have switched on the TV and the receiver is in the TV mode. © 2002 EchoStar International Corporation All rights reserved 1.1. TO SELECT A MODE 1. On the RCU, press the OK key; 2. Press the RED key and make the selection. 3. Read the available help text for information. 5 1.2. TO SELECT A CHANNEL 1. 2. 3. 4. On the RCU, press the OK key. Select the required mode. Read the available help text for information. Select a channel, either: a. use the keys; b. use the page + / - keys; c. use the numbered keys. NOTE Normally, you only can view a scrambled channel with the applicable CI-module and/or smart card inserted in a CI-slot or Viaccess smart card reader. Digital Satellite Receiver Page 5 - 1 Section 5 Operation 1.3. TO SELECT A LIST 1. 2. 3. 4. 5. On the RCU, press the OK key. Select the required mode. Read the available help text for information. On the RCU press the GREEN key. Select the required list. 1.4. TO GROUP A LIST 1. 2. 3. 4. 5. On the RCU, press the OK key. Select the required mode. Read the available help text for information. On the RCU press the YELLOW key. Select the required group option. © 2002 EchoStar International Corporation All rights reserved 1.5. TO SORT A LIST 1. 2. 3. 4. 5. On the RCU, press the OK key. Select the required mode. Read the available help text for information. On the RCU press the BLUE key. Select the required sort option. Note that only for the Character and Word option a keyboard appears. 6. When the keyboard appears: a. use the arrow keys to navigate; b. press OK to accept the character; c. select the button to get lower case characters and numbers; d. select the button e. on the RCU, press the OK key to confirm. Page 5 - 2 EchoStar DVR-7000 Viaccess Operation Section 5 1.6. TO EDIT A LIST 1. 2. 3. 4. 5. On the RCU, press the OK key. Select the required list. Read the available help text for information. On the RCU press the WHITE key. Select the required edit option. NOTE Some EDIT options are not always available. If an option is not presented, select Group - None and Sort - None © 2002 EchoStar International Corporation All rights reserved 1.6.1. TO MOVE A CHANNEL 1. 2. 3. 4. In the Edit menu, select the Move option. Read the available help text for information. Go to the channel you want to move. On the RCU, press the OK key. Note a red bullet appears behind the selection. 5. If you want to undo the selection, press the OK key again. 5 6. Move the channel, either: a. use the keys; b. use the page + / - keys; 7. On the RCU, press the OK key to confirm. 8. Either: a. press the WHITE key to end the session, or b. select the next channel you want to move. Digital Satellite Receiver Page 5 - 3 Section 5 Operation 1.6.2. TO LOCK A CHANNEL CAUTION You can only lock a channel or favorite if you have set the parental lock and the PIN-code correctly. We recommend, in the parental lock menu, that you check if the lock option is set correctly. NOTE After you have set a lock onto a channel, the installation and the EDIT menu are automatically locked with an installation lock to prevent unauthorized access. Now you can only access these functions if you know the correct PIN-code. 1. 2. 3. 4. In the Edit menu, select the LOCK option. Read the available help text for information. Go to the channel you want to lock. On the RCU, press the OK key. Note a red bullet appears behind the selection. 5. If you want to undo the selection, press the OK key again. © 2002 EchoStar International Corporation All rights reserved 6. Either: a. press the WHITE key to confirm the lock and end the session, or b. select the next channel you want to lock. 7. You can temporarily unlock all channels: a. On the RCU, press the MENU key; b. Select the Parental Lock menu; c. Enter the correct PIN-code as requested; d. Set the channel lock to Off. 8. You can restore all the locks on the channels: a. On the RCU, press the MENU key; b. Select the Parental Lock menu; c. Enter the correct PIN-code as requested; d. Set the channel lock to On. Page 5 - 4 EchoStar DVR-7000 Viaccess Operation Section 5 1.6.3. TO DELETE A CHANNEL 1. 2. 3. 4. In the Edit menu, select the DELETE option. Read the available help text for information. Go to the channel you want to delete. On the RCU, press the OK key. Note a red bullet appears behind the selection and the cursor advances to the next channel. 5. If you want to undo the selection, press the OK key again. © 2002 EchoStar International Corporation All rights reserved 6. Either: a. press the WHITE key to confirm the deletion and end the session, or b. select the next channel you want to delete. 1.6.4. TO SET THE CHANNEL VOLUME OFFSET 1. 2. 3. 4. In the Edit menu, select the VOLUME option. Read the available help text for information. Go to the channel you want to edit. On the RCU, use the keys to set the volume. 5. Either: a. Press the WHITE key to end the session, or b. select the next channel you want to edit. 5 1.6.5. TO RENAME A CHANNEL OR RECORDING 1. In the Edit menu, select the RENAME option. 2. Go to the item you want to rename. 3. On the RCU, press the OK key. Digital Satellite Receiver Page 5 - 5 Section 5 Operation 4. When the keyboard appears: a. use the arrow keys to navigate; b. press OK to accept the character; c. select the button to get lower case characters and numbers; d. select the button e. on the RCU, press the OK key to confirm. 5. Either: a. Press the WHITE key to end the session, or b. select the next channel you want to rename. CAUTION You can only hide a channel if you have set the parental lock and the PIN-code correctly. We recommend that you check if the hide option is set correctly. NOTE After you have set a hide onto a channel, the installation and the EDIT menu are automatically locked with an installation lock to prevent unauthorized access. Now you can only access these functions if you know the correct PIN-code. 1. Make the hide function available for edit: a. On the RCU, press the MENU key; b. Select the Parental Lock menu c. Enter the correct PIN-code as requested; 2. Set the Master Hide to Off. 3. On the RCU: a. press the MENU key; b. press the EXIT key. Page 5 - 6 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved 1.6.6. TO HIDE A CHANNEL Operation Section 5 1. 2. 3. 4. In the Edit menu, select the HIDE option. Read the available help text for information. Go to the channel you want to hide. On the RCU, press the OK key. Note a red bullet appears behind the selection. 5. If you want to undo the selection, press the OK key again. 6. Either: a. press the WHITE key to confirm the hide and end the session, or b. select the next channel you want to hide. © 2002 EchoStar International Corporation All rights reserved 7. Make the hide function active a. On the RCU, press the MENU key; b. Select the Parental Lock menu c. Enter the correct PIN-code as requested; 8. Set the Master Hide to On. 9. On the RCU: a. press the MENU key; b. press the EXIT key. 5 10. You can temporarily unhide all channels: a. On the RCU, press the MENU key; b. Select the Parental Lock menu c. Enter the correct PIN-code as requested; d. Set the Master Hide to Off. 11. You can restore all the hides on the channels: a. In the parental lock menu, set the Master Hide to On. 2. USE THE FAVORITE LISTS Navigation and use of the favorite lists are the same as for the all channels and current satellite list as described before. The main difference is that you can setup and organize the favorite lists as required. EchoStar has already pre-named the favorite lists to help you getting started. It is however possible to change the name of the favorite list to something that is meaningful to you. For adding channels quickly, you can use the group and sort option first to limit the amount of channels where you want to choose from. As an example, now it is possible to add all sport related channels in one step to the Sports TV favorite list. Note that for each mode, a separate number of favorite lists is available. Digital Satellite Receiver Page 5 - 7 Section 5 Operation 2.1. ADD A CHANNEL TO A FAVORITE LIST 1. 2. 3. 4. On the RCU, press the OK key. Select the required mode. Read the available help text for information. Group and sort the all channels list to locate the required channel quickly. 5. On the RCU press the GREEN key. 6. Select the favorite list to which you want to add a channel. 2.2. ADD A GROUP OF CHANNELS TO A FAVORITE LIST NOTE As an example, this procedure details the instructions on how to add a group of channels to a favorite list. In this example we add a complete network to the My TV Channels favorite list 1. 2. 3. 4. 5. On the RCU, press the OK key. Select the required mode. Read the available help text for information. Group the channels as required. Select the favorite list to which you want to add the group of channels. 6. On the RCU press the WHITE key. 7. Select the add option. 8. Go to the network you want to add. 9. On the RCU, press the OK key. Note a red bullet appears behind the selection and the cursor advances to the next item. 10. If you want to undo the selection, select again and press the OK key. Page 5 - 8 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved 7. On the RCU press the WHITE key. 8. Select the add option. 9. Go to the channel you want to add. 10. On the RCU, press the OK key. Note a red bullet appears behind the selection and the cursor advances to the next channel. 11. If you want to undo the selection, press the OK key again. 12. Press the WHITE key to end the session. Operation Section 5 11. Press the WHITE key to end the session. 12. If only the network bar is show, press the i-key to expand the selection. 13. Select a channel. 14. On the RCU, press the OK key to view the selected channel. Note that in the left bar of the InfoBanner, a heart symbol appeared to indicate that this channel is a favorite channel. 2.3. RENAME A FAVORITE LIST © 2002 EchoStar International Corporation All rights reserved 1. 2. 3. 4. On the RCU, press the OK key; Press the RED key and select Lists. Press the GREEN key and select the category. Read the available help text for information. 5. In the Edit bar, select the RENAME option. 6. Go to the favorite list you want to rename. 7. On the RCU, press the OK key. 5 8. When the keyboard appears: a. use the arrow keys to navigate; b. press OK to accept the character; c. select the button to get lower case characters and numbers; d. select the button e. on the RCU, press the OK key to confirm. Digital Satellite Receiver Page 5 - 9 Section 5 Operation 9. Either: a. press the WHITE key to end the session, or b. select the next favorite list you want to rename. 3. TO USE THE ELECTRONIC PROGRAM GUIDE (EPG) NOTE The EPG information is not always available. Sometimes the service provider (who sends the EPG information) supplies only the program name, the now/next information or sometimes nothing at all. EchoStar has no influence on this matter. Make sure the local time is set otherwise you can not view EPG information because it needs the correct time (Refer to the Local Time menu). © 2002 EchoStar International Corporation All rights reserved 1. Use the EPG key to access the main EPG menu. 2. Allow the receiver to collect the EPG information for the selected channel. 3. Read the available help text for information. 4. Use the keys to select a channel. 5. Use the keys to select the programs. 6. Use the key to return to actual time in the EPG window. 7. Use the i-key to shift between detailed program information and the main EPG menu. 8. Use the OK key to view the selected channel. Page 5 - 10 EchoStar DVR-7000 Viaccess Operation Section 5 3.1. TO SET A TIMER CAUTION Note that the VCR timer does not start or program your video recorder (VCR). You have to set the timer of your VCR also to the same time as on the receiver. Please refer to the user’s guide of your VCR how to record from a satellite receiver. On quite a lot of VCRs you have to select the so called external channel (E1) © 2002 EchoStar International Corporation All rights reserved 1. On the RCU, press the EPG key. 2. If EPG data is available, select a program in the future (right of the red line in the EPG window); 3. If no EPG data is available, select the correct channel. 4. Read the available help text for information. 5. On the RCU press the YELLOW key. 6. Select the required timer. 7. When the timer appears, if necessary: 8. Change the date: a. use thekey, to go to the Date; b. read the available help text for information; c. press the OK key to change the date; d. in the calendar, select the required date; e. press the OK key to return to the timer. NOTE 5 Be aware that the shown EPG start/stop time might not be the same as the actual start/stop times, because of last minute program changes. 9. Change the start time: a. use thekey, to go to the Start Time; b. read the available help text for information; c. press thekeys to set the hours; d. press the OK key to go to the minutes; e. press thekeys to set the minutes. 10. Change the stop time: a. use thekey, to go to the Stop Time; b. read the available help text for information; c. press thekeys to set the hours; d. press the OK key to go to the minutes; e. press thekeys to set the minutes. Digital Satellite Receiver Page 5 - 11 Section 5 Operation 11. Change the repetition rate: a. use thekey, to go to the Period; b. read the available help text for information; c. press thekeys to set the repetition. 12. Save the recording in a specific (favorite) list: a. use thekey, to go to the Favorite List; b. read the available help text for information; c. press thekeys to set the (favorite) list. 13. Save the recording as locked or hidden a. use thekey, to go to the Parental Lock; b. read the available help text for information; c. press thekeys to select Lock or Hide; d. press the OK key to activate the setting. Note that a red bullet appears in selection. 14. Change the status: a. use thekey, to go to the Status; b. read the available help text for information; c. press thekeys to set the status; © 2002 EchoStar International Corporation All rights reserved 15. Save the timer: a. use thekey, to go to the Store Settings; b. read the available help text for information; c. press the OK key to confirm the settings. 16. Note the clock that appeared in your program. 17. Do not forget to program also your VCR if you have set a VCR timer. NOTE You cannot set a (EPG-based) timer in the past or on a program that has already begun. If the timer screen does not disappear, you have set a timer in the past or for a running program. Revise either date, start or stop time to a time in the future. 18. For a program that has already begun: a. set the timer as usual and change the start time to 00:00; b. use the key, to go to the Store Settings; c. press the OK key to confirm the settings. 19. Note that: a. the DVR InfoBanner momentarily appears with a red blinking indicator; b. the display on the receiver shows Hdd. Page 5 - 12 EchoStar DVR-7000 Viaccess Operation Section 5 3.2. DELETE A TIMER 1. On the RCU: a. press the EPG key; b. press the GREEN key; c. select from the list: Timers; d. press the OK key. 2. Select the applicable timer and press the OK key. 3. Change the status: a. use the key, to go to the status; b. read the available help text for information; c. press thekey to set the status to inactive. 4. Delete the timer: a. use the key, to go to the Store Settings; b. read the available help text for information; c. press the OK key to confirm the deletion. © 2002 EchoStar International Corporation All rights reserved 3.3. USE THE INFOBANNER RELATED FUNCTIONS 1. On the RCU, press the i-key. 2. If available, allow the receiver to collect the EPG information for the selected channel. 3. If the i-button in the InfoBanner is shown, use the i-key on the RCU to shift between the detailed program information and the InfoBanner. 4. On the RCU, press the EXIT key to remove the InfoBanner from the screen (only in TV-mode). 5 3.4. TO SELECT THE ALTERNATE AUDIO 1. On the InfoBanner, find the alt audio symbol. 2. On the RCU, press the key. 3. In the Alt. Audio pop-up menu, select the required alternate audio. Note that alternate audio information is provided by the service provider. 4. On the RCU, press the Digital Satellite Receiver key. Page 5 - 13 Section 5 Operation 3.5. TO SELECT THE SUBTITLE LANGUAGE 1. On the InfoBanner, find the subtitle symbol. 2. On the RCU, press the key. 3. In the subtitle pop-up menu, select the required subtitle language. Note that subtitle information is provided by the service provider. 4. On the RCU, press the key. 3.6. TO SELECT ANOTHER SATELLITE 4. © 2002 EchoStar International Corporation All rights reserved 1. On the RCU, press the key. 2. In the Satellites List pop-up menu, select the required satellite. 3. On the RCU, press the OK key. Note that the dish moves towards the selected satellite. TO USE THE DVR 4.1. PLAY BACK A RECORDING 1. 2. 3. 4. On the RCU, press the OK key. Select the DVR mode. Read the available help text for information. Select a recording, either: a. use the keys; b. use the page + / - keys; 5. On the RCU, press the OK key to playback the recording. 6. On the RCU: Page 5 - 14 a. press the key for play; b. press the key for fast forward; c. press the key for rewind; d. press the key for pause; e. press the key to stop. EchoStar DVR-7000 Viaccess Operation Section 5 7. For forward slow motion, on the RCU: a. press the key for pause; b. press the key for slow motion; 8. For reverse slow motion, on the RCU: a. press the key for pause; b. press the key for reverse slow motion. 4.2. USE THE INDEX MARKER © 2002 EchoStar International Corporation All rights reserved 1. Play back a recording. 2. On the RCU: a. press the i-key to show the InfoBanner; b. press the MENU key to activate the menu; 3. 4. 5. 6. c. use thekeys to select the button. Wait for the scene that you want to mark. On the RCU, press the OK key. Wait for the popup to disappear. On the RCU: a. press the MENU key to leave the menu; b. press the EXIT key to remove the InfoBanner. 5 4.3. PLAY BACK THE INDEX MARKER 1. 2. 3. 4. 5. Select the DVR mode. Select the event with the index marker. On the RCU, press the i-key to expand. Select the index that you want to play back. On the RCU, press the OK key to playback the index. Digital Satellite Receiver Page 5 - 15 Section 5 Operation 4.4. USE THE A-B MARKER 1. Play back a recording. 2. On the RCU: a. press the i-key to show the InfoBanner; b. press the MENU key to activate the menu; c. use thekeys to select the button. 3. Wait for the scene that you want to repeat. 4. On the RCU, press the OK key. 5. Wait for the popup to disappear. 6. 7. 8. 9. Wait for the end of the scene you want to repeat. On the RCU, press the OK key. Wait for the popup to disappear. Note that the marked scene repeats continuously. © 2002 EchoStar International Corporation All rights reserved 10. On the RCU, press the OK key to cancel the marker. 11. Wait for the popup to disappear. 12. On the RCU: a. press the MENU key to leave the menu; b. press the EXIT key to remove the InfoBanner. 4.5. CAPTURE A PERSONAL BACKGROUND 1. Play back a recording. 2. On the RCU: a. press the i-key to show the InfoBanner b. press the MENU key to activate the menu; 3. 4. 5. 6. Page 5 - 16 c. use thekeys to select the button. Wait for the scene that you want to capture. On the RCU, press the OK key. Wait for the popup to disappear. On the RCU: a. press the MENU key to leave the menu; b. press the EXIT key to remove the InfoBanner. EchoStar DVR-7000 Viaccess Operation Section 5 4.6. INSTALL A PERSONAL BACKGROUND 1. On the RCU, press: a. the MENU key; b. the key to select the 2. 3. 4. 5. menu; c. the OK key, to select the menu. Press the OK key and select Background menu. Read the available help text for information. Select the personal background. On the RCU: a. press the MENU key to leave the menu; b. press the EXIT key to return to live video. 4.7. USE LIVE PAUSE © 2002 EchoStar International Corporation All rights reserved 1. In the TV mode, select a channel to view. 2. On the RCU, press the key: a. the DVR InfoBanner appears with a yellow pause and a red blinking indicator (recording); b. the live video freezes; c. the display on the receiver shows Hdd. 5 3. On the RCU, press the key: a. the live video is continued from the pause; b. the DVR InfoBanner disappears; c. the display on the receiver shows Hdd. 4. On the RCU: press the key to fast forward a time frame (to catch up with the real live video). 5. On the RCU, press the Digital Satellite Receiver key to abort pause. Page 5 - 17 Section 5 5. Operation TO USE THE MP3 PLAYER 5.1. PLAY BACK A SONG NOTE Thekeys have a different function in the various selections: ■ normal play mode: key, previous song - key, next song; ■ detailed information: key, previous song - key, next song; ■ play mode menu: key, previous mode - key, next mode; 1. 2. 3. 4. On the RCU, press the OK key. Select the MP3 mode. Read the available help text for information. Select a song, either: a. use the keys; b. use the page + / - keys; 5. On the RCU, press the OK key to play back the song. 6. On the RCU: key for play; b. press the key for fast forward; c. press the key for rewind; d. press the key for pause; © 2002 EchoStar International Corporation All rights reserved a. press the e. press the key to stop; f. press the i-key for detailed information. 7. For bass and treble setting, on the RCU: a. press the key for the bass control button; b. press thekeys to change the setting; c. press the key for the treble control button; d. press thekeys to change the setting; e. press the key to confirm the setting. 8. For the different play modes, on the RCU: a. press the MENU key to access the menu; b. press thekey to select a play mode; c. press the OK key, to activate the selection; d. press the OK key, to cancel the selection; e. press the MENU key to leave the menu. Page 5 - 18 EchoStar DVR-7000 Viaccess Operation Section 5 5.2. USE THE A-B MARKER 1. Play back a song. 2. On the RCU: a. press the MENU key to activate the menu; b. use thekeys to select the button. 3. Wait for the fragment that you want to repeat. 4. On the RCU, press the OK key. 5. Wait for the popup to disappear. © 2002 EchoStar International Corporation All rights reserved 6. Wait for the end of the fragment you want to repeat. 7. On the RCU, press the OK key. 8. Wait for the popup to disappear. 9. Note that the marked fragment repeats continuously. 10. On the RCU, press the OK key to cancel the marker. 11. Wait for the popup to disappear. 12. On the RCU, press the MENU key to leave the menu. 13. Note that none of the buttons is highlighted. 6. TO SET THE USER PREFERENCES 5 6.1. TO CHANGE THE USER PROFILE 1. On the RCU, press: a. the MENU key; b. the key to select the menu; c. the OK key, to select the menu. 2. Press the OK key and make the selections. 3. Read the available help text for information. 4. On the RCU: a. press the MENU key to save the settings; b. press the EXIT key to leave the menu. Digital Satellite Receiver Page 5 - 19 Section 5 Operation 6.2. TO CHANGE THE LANGUAGE 1. On the RCU, press: a. the MENU key; b. the key to select the menu; c. the OK key, to select the menu. 2. Press the OK key and make the selections. 3. Read the available help text for information. 4. On the RCU: a. press the MENU key to save the settings; b. press the EXIT key to leave the menu. 6.3. TO SET THE PARENTAL LOCK NOTE This procedure does not lock a specific channel or favorite. After you made the parental control settings, you must lock the required channels or favorites manually. For a detailed procedure, please refer to the paragraph To lock a channel. © 2002 EchoStar International Corporation All rights reserved 1. On the RCU, press: a. the MENU key; b. the key to select the 2. 3. 4. 5. menu; c. the OK key, to select the menu. Enter the correct PIN-code as requested Press the OK key and make the selections. Read the available help text for information. On the RCU: a. press the MENU key to save the settings; b. press the EXIT key to leave the menu. 6.4. TO CHANGE THE PIN CODE 1. 2. 3. 4. 5. 6. Select the parental Lock menu Enter the correct PIN-code as requested Select the Change PIN Code bar. On the RCU, press the OK key. Read the available help text for information. In the Change PIN-Code menu, make the required selections. Now you will return to the parental lock menu. 7. On the RCU: a. press the MENU key to save the settings; b. press the EXIT key to leave the menu. Page 5 - 20 EchoStar DVR-7000 Viaccess Operation Section 5 6.5. TO SET THE LOCAL DATE AND TIME NOTE Make sure the local time is set correctly otherwise you can not view and use the EPG information because the EPG and the related timers need the correct time. 1. On the RCU, press: a. the MENU key; b. the key to select the menu; c. the OK key, to select the menu. 2. Press the OK key and make the selections. 3. Read the available help text for information. 4. On the RCU: a. press the MENU key to save the settings; b. press the EXIT key to leave the menu. © 2002 EchoStar International Corporation All rights reserved 6.6. TO SET THE TV SYSTEM 1. On the RCU, press: a. the MENU key; b. the key to select the menu; 5 c. the OK key, to select the menu. 2. Press the OK key and make the selections. 3. Read the available help text for information. 4. On the RCU: a. press the MENU key to save the settings; b. press the EXIT key to leave the menu. Digital Satellite Receiver Page 5 - 21 © 2002 EchoStar International Corporation All rights reserved Viaccess EchoStar DVR-7000 Page 5 - 22 Operation Section 5 Maintenance Section 6 MAINTENANCE 1. HARDWARE MAINTENANCE WARNING RISK OF ELECTRICAL SHOCK. REMOVE THE MAINS PLUG FROM THE POWER SUPPLY SOCKET BEFORE YOU CLEAN THE RECEIVER. MAKE SURE, IF USED, CLEANING AGENTS CANNOT GET IN THE RECEIVER. 1. 2. 3. 4. 5. Switch the receiver to stand-by and on the display make sure the clock shows. Remove the mains plug from the power supply socket. Wait at least five seconds, to help avoid possible damage to the receiver’s electronics. Use a dry, soft and clean lint-free cleaning cloth to clean the receiver. Other cleaning agents can cause damage to the outside surface. a. Make a dry, soft and clean lint-free cleaning cloth a little damp. b. Carefully wipe the surface and make sure that no moisture gets into the receiver. c. Let the receiver dry on the air. 6. Install the receiver and make sure all connections on the rear panel are made correctly (For more detailed instructions, please refer to the section Installation). 7. Connect the mains plug to the power supply socket. 8. Set the local time, for detailed instructions please refer to the section Operation. © 2002 EchoStar International Corporation All rights reserved NOTE Make sure the local time is set correctly otherwise you can not view and use the EPG information because the EPG and the related timers need the correct time. 2. SOFTWARE MAINTENANCE NOTE Unless otherwise specified; This note explains the way you can navigate through the maintenance pages of the EchoNAV setup menu. 1. Use the OK key to pull down the menu selection fields. 2. Use thearrow keys to go through the selectable menu items. 3. In a pull-down menu, use the OK key to confirm the selection. 4. Use thearrow keys to navigate between the left and right column of selectable menu items. 5. Use the EXIT key to leave the menu and return to the live mode. 2.1. TO CHANGE THE SETUP OF THE RECEIVER 1. On the RCU, press: a. the MENU key; b. the key to select the 2. 3. 4. 5. menu; c. the OK key, to select the or menu. Press the OK key and make the selections. Read the available help text for information. Go to the Check Signal field. On the RCU, press the OK key. Digital Satellite Receiver Page 6 - 1 6 Section 6 Maintenance 6. Wait for the Check Signal page to appear. 7. In the Check Signal menu make the required selections for transponder and search mode. 8. Read the available help text for information. 9. If the red dot in the transponder field stays: a. select another transponder; b. go to the check signal field; c. on the RCU, press the OK key. 10. Go to the Search Channels field. 11. On the RCU, press the OK key. 12. Wait for the search to complete: a. the receiver display shows a moving dot; b. the search completed popup menu appears. 13. On the RCU, press the OK key. . © 2002 EchoStar International Corporation All rights reserved 2.2. TO CHANGE THE USER LNB SETTINGS 1. On the RCU, press: a. the MENU key; b. the key to select the 2. 3. 4. 5. menu; c. the OK key, to select the menu. Press the OK key and make the selections. Read the available help text for information. Go to the Store Settings field. On the RCU: a. press the OK key to save the settings; b. press the EXIT key to leave the menu. 2.3. ABOUT ECHOSTAR - RECEIVER INFORMATION 1. On the RCU, press: a. the MENU key; b. the key to select the menu; c. the OK key, to select the menu. 2. In the About EchoStar information menu you can look up the factory and receiver information. 3. Read the available help text for information. Page 6 - 2 EchoStar DVR-7000 Viaccess Maintenance Section 6 2.4. TO DO A SOFTWARE UPDATE FROM THE SATELLITE 1. On the RCU, press: a. the MENU key; b. the key to select the menu; c. the OK key, to select the menu. 2. Press the OK key and make the selections. 3. Read the available help text for information. 4. Go to the System Upgrading field. 5. On the RCU, press the OK key. 6. Wait for the system upgrade to complete. WARNING DO NOT PRESS ANY KEYS DURING THE SESSION, THIS CAN INTERRUPT THE SOFTWARE UPGRADE SEQUENCE © 2002 EchoStar International Corporation All rights reserved WHICH CAN DAMAGE THE RECEIVER PERMANENTLY. ■ The receiver display shows: - ota (check for new software) - d1...d100 (downloading) - P1...P100 (upgrading) - done (update memory) - C.... (channel indication) NOTE EchoStar offers on a regular basis software updates via the satellite and the EchoStar website. If you have trouble to get a download with the latest software version, please ask your retail seller or dealer for assistance. 2.5. TO DO A FACTORY RESET NOTE Be sure if you select Memory Erase because all your personal settings will be deleted and replaced with the factory settings. Some of the personal settings that will be deleted are Parental Lock, Favorite lists and System setup. Memory erase resets the receiver as if the receiver comes just out of the box. 6 1. On the RCU, press: a. the MENU key; b. the key to select the 2. 3. 4. 5. menu; c. the OK key, to select the menu. Press the OK key and make the selections. Read the available help text for information. Go to the Confirm Reset field. On the RCU, press the OK key. Digital Satellite Receiver Page 6 - 3 Section 6 Maintenance 2.6. TO GET CONDITIONAL ACCESS INFORMATION 1. On the RCU, press: a. the MENU key; b. the key to select the menu; c. the OK key, to select the menu. 2. Press the OK key and make the selections. 3. Read the available help text for information. 2.7. TO ADD A SATELLITE © 2002 EchoStar International Corporation All rights reserved 1. On the RCU, press: a. the OK key; b. Select Mode = TV c. Select List = All Channels d. Select Group = None e. Select Sort = None f. Select Edit = Add SAT 2. On the RCU, press the OK key. 3. Use the on-screen keyboard to enter the name of the satellite. 4. When the keyboard appears: a. use the arrow keys to navigate; b. press OK to accept the character; c. select the button to get lower case characters and numbers; d. select the button e. on the RCU, press the OK key to confirm. 5. On the RCU, use the numeric keys to enter the Position. 6. Select the Location. 7. On the RCU, press the white key. Page 6 - 4 EchoStar DVR-7000 Viaccess Maintenance Section 6 8. Enter the required settings. 9. Read the available help text for information. 10. Go to the continue field. 11. On the RCU, press the OK key to advance. © 2002 EchoStar International Corporation All rights reserved 12. Make the required selections, it is advised to select the search mode as TP. 13. Read the available help text for information. 14. Monitor the signal indicator and make sure that you have sufficient signal strength and quality. 15. After you found the location, press the OK key to confirm the position. 16. Go to the Search Channels field. 17. On the RCU, press the OK key to advance. 18. Wait for the search to complete: a. the receiver display shows a moving dot; b. the search completed popup menu appears. 19. On the RCU: a. press the OK key to end the procedure; b. press the EXIT key to return to live video. 2.8. TO ADD A TRANSPONDER 6 1. Select a channel of the satellite to which you want to add a transponder. 2. On the RCU, press: a. the OK key; b. Select Mode = TV c. Select List = All Channels d. Select Group = None e. Select Sort = None f. Select Edit = Add TP 3. On the RCU, press the OK key. Digital Satellite Receiver Page 6 - 5 Section 6 Maintenance 4. 5. 6. 7. On the RCU, press the OK key again to advance. Enter the required settings. Read the available help text for information. Monitor the signal indicator and make sure that you have sufficient signal strength and quality. 8. Go to the Search Channels field. 9. On the RCU, press the OK key to advance. 10. Wait for the search to complete: a. the receiver display shows a moving dot; b. the search completed popup menu appears. 11. On the RCU: a. press the OK key to advance; b. press the white key to end the procedure; c. press the EXIT key to return to live video. © 2002 EchoStar International Corporation All rights reserved 2.9. TO ADD A PID 1. Select a channel of the transponder to which you want to add a PID. 2. On the RCU, press: a. the OK key; b. Select Mode = TV c. Select List = All Channels d. Select Group = None e. Select Sort = None f. Select Edit = Add PID 3. On the RCU, press the OK key. 4. Select the applicable transponder. 5. On the RCU, press the OK key. Page 6 - 6 EchoStar DVR-7000 Viaccess Maintenance Section 6 6. Enter the required settings. 7. Read the available help text for information. 8. Monitor the signal indicator and make sure that you have sufficient signal strength and quality. 9. Go to the Store Settings field. 10. On the RCU: a. press the OK key to store the settings; b. press the white key to end the procedure; c. press the EXIT key to return to live video. 3. END OF LIFE DISPOSAL Your receiver and related accessories contain materials which can be recycled and reused. Specialized companies can recycle your equipment to increase the amount of reusable materials and to minimize the amount of materials to be disposed of. © 2002 EchoStar International Corporation All rights reserved Please inform yourself on local regulations on disposal of your equipment. 6 Digital Satellite Receiver Page 6 - 7 © 2002 EchoStar International Corporation All rights reserved Viaccess EchoStar DVR-7000 Page 6 - 8 Maintenance Section 6 Troubleshooting Section 7 TROUBLESHOOTING 1. GENERAL Problem Possible cause What to do? 1. Nothing appears on the receiver display. ■ Main power cable is damaged or not connected. ■ Check the main power cord and insert it in the (wall socket). ■ General domestic power failure ■ Check the domestic power supply and insert a new fuse. ■ The back-up battery of ■ Contact your dealer. the clock might be empty. 2. The display shows a flashing - - : - - ■ 3. You have forgotten the personal PIN-code. © 2002 EchoStar International Corporation All rights reserved 2. Contact your dealer. EPG RELATED Problem Possible cause What to do? 1. The EPG is empty. ■ You have selected an empty (favorites) list. ■ Select another (favorites) list. ■ The selected program supports no EPG. ■ There is no solution for this, the data is supplied by the service provider and beyond control. ■ The local time is not correct. ■ In the Local Time menu, set the correct time. ■ The selected program is an analog channel. (InfoBanner shows no i button) ■ Select a digital channel because analog channels do not support EPG information. ■ The time scale of the EPG is to big. ■ 2. The EPG shows (little) grey balloons without text. Use the zoom function (blue key) to reduce the time scale until the information can be read. ■ Select the grey balloon and on the RCU, press the i-key to view and read the information. 7 Digital Satellite Receiver Page 7 - 1 Section 7 3. Troubleshooting TV AND RADIO RELATED Problem Possible cause What to do? 1. No picture or sound in the ■ Receiver is in standby. TV or radio mode. ■ Cable related problems. 2. Bad picture or noisy sound in the TV or radio mode. Switch the receiver on. ■ Check the cable connections and do any necessary work. ■ Dish/LNB related problems. ■ Make sure the dish and LNB are correctly adjusted. Do any necessary work. ■ Bad reception of the signal. ■ Make sure the dish and LNB are clean and correctly adjusted. Do any necessary work. ■ Signal interference with UHF-installation. ■ Check the UHF settings. Make sure you use the correct channel. Please refer to the TV/radio user guide. ■ Bad reception of the signal. ■ Make sure the channel selected transmits. ■ Make sure the correct dish or LNB is selected. ■ Make sure the dish and LNB are clean and correctly adjusted. Do any necessary work. ■ Connect the 4. There is no Dolby digital ■ The equipment is connected to the receiver S/P DIF connector of the (AC-3) sound to my other with a RCA or SCARTreceiver to the Dolby equipment. cable only. digital input of the receiving equipment. 5. I cannot view or listen to a ■ The CI-module/smart card is not valid. scrambled channel. 6. I cannot find a channel which should be there. 7. The TV shows a popup: Page 7 - 2 ■ Insert, for this service, a valid CI-module/smart card. ■ The CI-module/smart card is not (correctly) inserted. ■ Insert the CI-module/ smart card correctly. ■ The group or sort option is set. ■ Set the group and sort mode to none. ■ You are in the wrong list. ■ Check the all channels list and select the correct (favorite) list. ■ The channel is hidden. ■ Unhide the channel. ■ You have selected an empty (favorite) list. ■ Press the WHITE key Select the add option. ■ Press the GREEN key Select the Current Sat or All Channels list. EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved 3. The TV shows a No Signal message. ■ Troubleshooting 4. REMOTE CONTROL UNIT (RCU) RELATED Problem Possible cause What to do? 1. Receiver does not respond to the RCU. ■ Batteries are empty. ■ ■ The RCU is set to another ■ On the RCU, press the mode (TV, VCR, AUX). SAT key. ■ The receiver code is not programmed correctly. ■ Program the SAT mode with code 0222, see the appendix for instructions. ■ Direct sun light from behind the receiver. ■ Close the sun blinds or get closer to the receiver. ■ You do not aim ■ Aim at the receiver sufficiently at the receiver. display. ■ install a RCU extender. ■ Batteries are almost empty. 2. Receiver does sometimes not respond to the RCU. © 2002 EchoStar International Corporation All rights reserved 5. Section 7 ■ Insert new batteries. Insert new batteries. DVR RELATED Problem Possible cause What to do? 1. I can not record a TV or radio broadcast onto the hard disk drive. ■ You have pressed the record key once. ■ Press the record key twice, EchoStar has build in a safety to prevent unwanted recording. ■ You have selected an analog station. ■ Analog broadcasts cannot be recorded onto the digital DVR, Please record the broadcast with a VCR. ■ Check the Local Time setting and reset as necessary. 2. The programmed channel ■ Local time setting is not correctly set. is not recorded completely. 3. Live pause seems not to work. 4. I cannot access the special functions menu. Digital Satellite Receiver ■ The EPG data does not reflect the actual start or stop time. ■ This data is supplied by the service provider and beyond control. You can set the timer 5 minutes earlier/later than shown. ■ You have selected an analog station. ■ Live pause records the program temporarily onto DVR. Analog broadcasts cannot be recorded onto the digital DVR. ■ You have pressed the record key. ■ Press the pause key once. ■ The InfoBanner is not in view. ■ Use the i-key to show the InfoBanner and press the MENU key. ■ You did not press the MENU key. ■ Press the MENU key. Page 7 - 3 7 Section 7 6. Problem Possible cause What to do? 5. The detailed information window shows NO INFORMATION ■ You have made a ■ There is no solution for recording from a program this, the data is supplied that did not offer detailed by the service provider information. and beyond control. 6. I cannot find a recording which should be there. ■ The group or sort option is set. ■ Set the group and sort mode to none. ■ You are in the wrong list. ■ Check the all Files list and select the correct (favorite) list. ■ The recording is hidden. ■ Unhide the recording. MP3 PLAYER RELATED Problem Possible cause What to do? 1. I cannot access the special functions menu. ■ You did not press the MENU key. ■ 2. The detailed information window shows data that is not complete. ■ The detailed information ■ When already on the is not available in the DVR, you cannot access MP3-tag. this information. During The MP3-tag is part of the downloading, use the MP3 file and contains the MP3 loader to change or detailed information. complete the MP3-tag. 3. I cannot go to another song with thekeys. ■ You are in the special functions menu ■ Press the MENU key. Press the MENU key and try again. INSTALLATION RELATED Problem Possible cause What to do? 1. My television does not receive any signal from the receiver (UHF only) ■ You did not select the correct audio/video channel on your TV. ■ 2. My television does not receive any signal from the receiver ■ You did not select the correct A/V channel on your TV. ■ Select the correct A/V channel on your TV. ■ You did not use a correct SCART cable. ■ Use only a full featured SCART cable that is correctly shielded. ■ On the receiver, in the user profile menu select the correct aspect ratio. Refer to the user manual of the TV for instructions. ■ On the receiver, In the TV system menu select the correct channel and PAL setting. ■ Use another method to connect the receiver. 3. My television shows black ■ You did not select the areas on the left and right correct aspect ratio for of the screen. your TV. 4. In a motorized ■ The motor turns the other ■ At the receiver, change installation, the dish turns way around because the the cable connections to to the West while I select cable is not installed M1 and M2. Set East Limit. correctly. Page 7 - 4 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved 7. Troubleshooting Troubleshooting Problem Possible cause What to do? 5. In a motorized installation, I cannot select a specific satellite. ■ ■ The required satellite is located outside the selected East or West limit. Section 7 If physically possible, mind dish damage, revise the limit setting. ■ Select another satellite. ■ The cables used are ■ Inspect the cable for 6. In a motorized worn, damaged or possible damage and installation, the positioner corroded. install new cable as reacts unpredictable required. which results in incorrect positioning of the dish. ■ The cable is incorrectly ■ Use sufficiently shielded finished or not sufficiently and correctly finished shielded. cables. © 2002 EchoStar International Corporation All rights reserved 7. During (initial) setup of ■ You did not select the the receiver, no channels correct LNB(F). are found. 8. The signal indicator shows one indicator (only signal strength). ■ On the receiver, in the installation setup menu select the correct LNB(F). ■ When installed, you have ■ On the receiver, in the selected the incorrect installation setup menu switch type or port. make the correct selections. ■ You have selected the incorrect satellite to search channels on. ■ On the receiver, in the installation setup menu select the correct satellite. ■ You have selected the incorrect search method. ■ At an initial setup, always choose the option All. ■ You have selected an analog transponder ■ Select another (digital) transponder. 7 Digital Satellite Receiver Page 7 - 5 © 2002 EchoStar International Corporation All rights reserved Viaccess EchoStar DVR-7000 Page 7 - 6 Troubleshooting Section 7 Glossary Section 8 GLOSSARY 1. LIST OF USED ABBREVIATIONS MCPC ANT Audio/Video Alternating Current ANTenna (terrestial) ATA Advanced Technology Attachement min. ºC mm CD Celcius Conditional Access Module Compact Disc CE Conformite European NVOD CH CHannel Common Interface OSD D2MAC Digital Multiplexed Analog Component version 2 OTA DAC Digital Analog Converter PAL B/G dB deciBell deciBell milliwatts PAL D/K A/V AC CAM CI dBm min MPEG NTSC OSG PCMCIA Multiple Channel Per Carrier MegaHertz minute minimum millimeter Moving Picture Experts Group National Television Standards Committee Near Video On Demand On-Screen Display On Screen Graphics Over The Air Phase Alternating Line B/G Phase Alternating Line D/K Personal Computer Memory Card Industry Association DiSEqC PCR Direct Current Digital Satellite Equipment Control PID DMA Direct Memory Access PIN DVB PWM HW Digital Video Broadcasting Digital Video Recorder East Limit Electronic Program Guide Fahrenheit Free-To-Air Gigabit GigaByte GrouND Graphical User Interface Horizon-to-Horizon HardWare IDE Intelligent Drive Equipment SW IEC International Electrotechnic Committee TP IF Intermediate Frequency TV IRD Integrated Receicer Decoder (the satellite receiver) µs ISO UHF LNB International Standards Organisation kilogram kiloHertz kiloWatt Low Noise Block down converter Vp-p Ultra High Frequency Volt Video ReCorder Version Voltspeak-peak LNBF LNB with Feedhorn Vrms Voltsrootmeansquare max. maximum MegaByte Megabits per second W Watt West Limit Width x Height x Depth DC © 2002 EchoStar International Corporation All rights reserved MHz DVR EL EPG ºF FTA Gb GB GND GUI H-H kg kHz kW MB Mbps Digital Satellite Receiver Program Clock Reference QPSK Packet IDentification Personal Identification Number Pulse Width Modulation Quadrature Phase Shift Key RCA Connector type, also Cinch connector RCU SAT Remote Control Unit Radio Frequency RaNDom Sony/Philips Digital Interface SATellite SCART Connector type, also Euro connector SCPC Single Channel Per Carrier Satellite Master Antenna TV Set Top Box (the satellite receiver) Software TransPonder RF RND S/PDIF SMATV STB V VCR Ver. WL WxHxD TeleVision micro second 8 Page 8 - 1 Section 8 2. Glossary EXPLANATION OF USED TERMINOLOGY C-band CCITT Clarke Belt CI-module/CAM Common Interface (CI) Conditional Access DBS band Decoder Digital Audio Broadcasting DiSEqC EPG FEC Feedhorn Ferrite Fixed Dish Free-To-Air broadcast Frequency band High Definition Television Horizontal KU-band LNB LNBF Page 8 - 2 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved DVB A frequency range (3.70-4.20 GHz) used for satellite broadcasts. An European committee of the international Telecommunications Union and makes recommendations for the distribution of telephone and data distribution. The Clarke Belt is a dedicated satellite orbit in which satellites remain in a fixed position relative to the Earth’s surface. Both names are used for these modules. These modules are PCMCIA cards with a slot in which you can insert a smart card. A DVB standard which defines the software and hardware requirements for condition access systems. A system which is used by service providers to control the subscriber’s access to certain services, programs and events like Pay TV. A signal frequency range (11.70-12.40ghz) intended for direct TV broadcast by satellite channels. A unit that is connected to a satellite receiver in order to unscramble a picture that is protected by encryption. Standard which describes the method of transmitting digital audio. A standard through which it is possible to let a DiSEqC compatible receiver send a signal over the RF cable to a switching device to switch between different LNBs or dishes. The DiSEqC uses the 22 kHz signal to control the switching device. A broadcast standard for digital radio and television, using MPEG-2 compression. DVB is being supported by all European manufacturers and broadcasters. A electronic program guide that comes with the broadcast of a particular satellite, Note that every station fills the EPG differently or not, so differences in the EPG are not necessarily receiver errors. Is an invisible part of a broadcast.which makes sure that possible errors in the reception of the satellite signal are corrected. A part of the dish which collects the signals from the dish. The signal is then fed to the LNB(F). A remote controlled device that determines the polarity of the signal which is fed to the LNB. The ferrite is more or less an electro-magnetic polarizer. A dish antenna that is pointed at one particular satellite. An unscrambled broadcast which you can view without additional payments to a service provider. A frequency band is a range of frequencies which are dedicate to a certain usage. In the satellite area, commonly known bands are the C-band and the Ku-band. A digital television format, which combines high-resolution video and theater like sound to create a movie theater quality TV viewing experience. In the satellite industry, horizontal is used to indicate the direction in which the received signal is polarized. Normally you will find that it is abbreviated as H. A frequency range (10.70-18.00 GHz) used by most European TV satellites. A device behind the feedhorn which processes the signal into a format which is understood by the receiver for further processing A LNB with an integrated Feedhorn. So the LNBF comes as one single unit. Glossary MPEG Near Video-On-Demand Network NTSC PAL PID © 2002 EchoStar International Corporation All rights reserved Parental lock Pay-Per-Channel Pay-Per-View Pay TV PIN-code Polarization Polarizer Polarmount Receiver RS232 connection Satellite SCART cable Service provider Digital Satellite Receiver Section 8 The Moving Picture Experts group is founded by the ISO to provide a basis for the coding and compression of moving pictures. MPEG has now become a standard method for the digital transmission of video and sound using less bandwidth than the analog transmission method. Multi channel system broadcasting many copies of a film with staggered start times so a complete film is always available to a viewer with a short waiting period. With respect to the receiver, a network (also known as a bouquet) is a set of programs that is offered by a single service provider. USA video standard with image format 4:3, 625 lines, 60 Hz and 4 MHz bandwidth with a total of 6 MHz video channel width. European video standard with image format 4:3, 625 lines, 50 Hz and 4 MHz bandwidth with a total of 8 MHz video channel width. MPEG-2 transmits the audio and video information in socalled packages. At the beginning of each package is an identifier (PID) present which tells the receiver what to do with the received information. Satellite receivers use normally four types of PID, these are VPID (video PID), APID (audio PID), Program Clock Reference (PCR PID) and data PID (EPG information). A feature which is introduced to give you the possibility to ‘lock’ or ‘hide’ several functions of the receiver to prevent unauthorized persons (children) to view broadcasts that are not suitable for them. The use of the parental lock requires a PIN-code. With this PIN-code you can change or unlock the locked or hided recordings and channels. With this feature, the viewer has to pay a certain price per month (or other period) to receive all programs of a certain channel. Conditional access service where the user is able to buy one particular program from a particular service provider. With Pay TV, the consumer has to pay for certain programs or services. The PIN-code or Personal Identification Number is necessary to make use of the parental lock feature. The PIN code has four digits which can be set personally. Broadcasts are done in a particular frequency band. To make maximum use of a frequency band and bring you the maximum number of programs, the broadcasts are polarized in different ways to fit as much as possible programs into one frequency band. A remote controlled device that determines the polarity of the signal which is fed to the LNB. A motorized dish antenna mount which enables a dish to point at every ‘visible’ satellite on the Clarke Belt. Unit which takes signals from a dish and converts them so they can appear on radio and TV. A RS232 connection allows you to connect equipment to the receiver which supports the RS232 protocol. A broadcast station, for satellite radio and TV, positioned on the Clarke Belt. A SCART cable is also known as ‘Peritel’ cable and is commonly used in Europe to connect the audio and video equipment. A fully furnished SCART cable has 21 wires which is at both sides finished with a 21-pin connector. A service provider is a company or organization that collects and offers you a number of programs and services. Some are free of charge and others you have to pay for. Page 8 - 3 8 Section 8 Glossary Smart Card SMATV Stream Symbol rate Transponder Vertical 3. A card that contains a ‘smart’ code and is used to de-scramble encrypted broadcasts when placed in a decoder or receiver with a built-in decoder. A satellite master antenna TV system is a system which shares the reception resources and is intended for the distribution of TV and radio signals to the user in one ore more buildings. The signal which is received from the transponder which contains the together with the video signal, additional information that the receiver needs in order to process the received signal correctly. Invisible information which tells the receiver at which speed (rate) the transponder sends the digital information (symbols). The receiver must be able to handle the symbol rate to process the signal correctly into a correct image. Equipment inside a satellite responsible for receiving a single uplinked channel and rebroadcasting it back to Earth. In the satellite industry, vertical is used to indicate the direction in which the received signal is polarized. Normally you will find that it is abbreviated as V. EXPLANATION OF THE SEARCH MODES Page 8 - 4 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved In the various menu pages you can make a selection from various search modes. The search mode gives the possibility to scan a satellite or transponder in a particular manner. The search modes are identified as: All In this mode the built-in database is used to select the available transponders. The digital and analog channels that belong to these transponders are searched for and added to the all channel list. FTA In this mode the built-in database is used to only search for the available FTA channels which are then added to the all channel list. In the real world it seems that the service providers do not always accurately code their channels with a scrambled or FTA code. For this reason you may find that some searched channels are scrambled. Also there is a possibility that scrambled channels are coded as FTA. These channels will then be missed out because of the erroneous code. Network In this mode the built-in database or information from the received stream is used to search for the transponders that are included with the currently received network. The digital channels that belong to this network are searched for and added to the all channel list. TP In this mode the built-in database or information from the received stream is used to search for or scan in the selected transponder. The digital and/or analog channels that belong to this transponder only are searched for or scanned in and added to the all channel list. Digital In this mode the built-in database is used to search for the available digital channels. The digital channels are then added to the all channel list. The digital channels are shown as white channel names for easy recognition. Analog In this mode the built-in database is used to add the analog channels to the all channel list. The analog channels are shown as black channel names for easy recognition. Digital IF In this mode the currently received satellite is scanned for digital channels. The digital channels, within the tuner bandwidth and selected symbol rates are scanned in and added to the all channel list. Analog IF In this mode the currently received satellite is scanned for analog channels. The analog channels within the tuner bandwidth are scanned in and added to the all channel list. Update In this mode the built-in database is used to search for the available digital channels. Then all new channels are added to the all channel list. None Transponders on the selected satellite are not searched for. Index INDEX A a-b repeat ............................... 4-19, 5-16, 5-19 about echostar page .................................... 6-2 add a channel to a favorite list ..................... 5-8 add pid ....................................................... 4-15 add pid ......................................................... 6-6 add sat ....................................................... 4-15 add satellite ................................................. 6-4 add tp ........................................................ 4-15 add transponder .......................................... 6-5 alternate audio ........................ 4-18, 4-20, 5-13 alternate subtitling ..................................... 4-18 analog .......................................................... 7-3 autosat ..................................................3-6, 4-9 B backgrounds ................................................ 4-6 bad picture ................................................... 7-2 bass control ............................................... 5-18 blue key ....................................................... 5-2 © 2002 EchoStar International Corporation All rights reserved C Section 9 el-wl indicator ...............................................4-8 epg .................................... 3-5, 4-16, 5-10, 7-1 erase - backgrounds ..................................4-12 erase - epg data ................................. 4-12, 6-3 erase - mp3 songs ............................. 4-12, 6-3 erase - recordings .............................. 4-12, 6-3 F factory reset ....................................... 4-12, 6-3 fast forward ...................................... 4-19, 5-14 favorite .......................................................4-18 favorite lists ..................................................5-7 features ........................................................4-1 ferrite .............................................3-3, 4-2, 8-2 fixed dish setup ..........................................4-10 fixed installations .........................................3-5 fta ...............................................................4-16 G green key .....................................................5-2 group ..........................................................4-15 group a list ...................................................5-2 capture background ..........................4-19, 5-16 caution ......................................................... 1-2 ce mark ........................................................ 1-2 change the language ................................. 5-20 change the pin code .................................. 5-20 change the user profile .............................. 5-19 check signal ............................................... 4-10 check signal menu ....................................... 6-2 ci-module ...............................................1-I, 7-2 cleaning ....................................................... 6-1 clock .................................................4-17, 5-12 conditional access information .................... 6-4 conditional access menu ....................4-5, 4-13 connections ................................................. 4-2 H D K decoder ....................................................... 3-1 delete ......................................................... 4-15 delete a channel .......................................... 5-5 delete a timer ............................................. 5-13 detailed program information ............5-10, 5-13 disposal ....................................................... 6-7 dolby digital ............................................... 4-18 dvb ............................................................... 1-II dvr timer ...........................................4-17, 5-11 keyboard .............................................. 5-2, 6-4 E echonav user interface ................................ 4-4 edit ............................................................. 4-15 edit a list ...................................................... 5-3 edit pid ....................................................... 4-15 edit tp ......................................................... 4-15 Digital Satellite Receiver hard disk drive .............................................7-3 hdd erase ........................................... 4-12, 6-3 hide a channel .............................................5-6 hide a timed recording ...............................5-12 I i-button ............................................. 4-18, 4-19 i-key ...........................................................5-10 index marker .................................... 4-19, 5-15 indicator .......................................................4-8 infobanner ........................................ 4-18, 5-13 install the receiver ........................................1-1 installation setup menu ................................4-5 ird .................................................................8-1 L language .......................................... 5-14, 5-20 languages page ...........................................4-6 list ...................................................... 4-14, 5-3 live pause .....................................................7-3 live pause ...................................................5-17 local time page .............................................4-7 lock ............................................................4-15 lock a channel ..............................................5-4 lock a timed recording ................................5-12 M master hide ..................................................5-6 memory erase .................................... 4-12, 6-3 mode ..........................................................4-14 Page 9 - 1 9 Section 9 Index move ......................................................... 4-15 move a channel ........................................... 5-3 mp3 player ................................................ 5-18 N navigation ..................................... 3-4, 5-1, 6-1 no information ............................................. 7-4 no picture .................................................... 7-2 no signal ...................................................... 7-2 no sound ..................................................... 7-2 note ............................................................. 6-3 O ota ......................................................4-12, 6-3 P Q quattro ......................................................... 4-3 R rcu ............................................................... 8-1 receiver information ..................................... 6-2 record .................................................4-19, 7-3 red bullet ..................................................... 5-5 red key ........................................................ 5-1 remote control unit ...................................... 4-3 rename ...................................................... 4-15 rename a channel ....................................... 5-5 rename a favorite list ................................... 5-9 repeat continuously ................................... 4-19 repeat list ................................................... 4-19 reserved timer ........................................... 4-17 rewind ...............................................4-19, 5-14 S safety ........................................................... 1-1 satellite ........................................................ 6-4 satellites list ............................................... 5-14 scrambled .................................................. 4-16 search channels page ..........................3-5, 6-2 search mode ............................................... 6-2 search modes .............................................. 8-4 select a channel .......................................... 5-1 select a list .................................................. 5-2 Page 9 - 2 T teletext ....................................................... 4-18 timers ......................................4-17, 5-11, 5-13 transponder ....................................... 4-15, 6-5 treble control .............................................. 5-18 tv system page ............................................ 4-7 U usb ....................................................... 3-1, 4-2 use the epg ................................................ 5-10 use the infobanner ..................................... 5-13 user lnb settings ................................ 4-11, 6-2 user preferences menu ................................ 4-5 user profile page .......................................... 4-6 V vcr timer ........................................... 4-17, 5-11 volume ....................................................... 4-15 volume button ............................................ 4-18 W warning ........................................................ 1-2 white key ...................................................... 5-3 Y yellow key .......................................... 5-2, 5-11 Z zoom .......................................................... 4-16 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved parental lock page ....................................... 4-6 parental lock settings .................................. 4-6 parental rating information ........................ 4-18 pause ...............................................4-19, 5-14 pid ......................................................4-15, 6-6 pin code ................................................4-7, 5-6 play ............................................................ 4-19 play back ................................................... 5-14 polarotor ...................................................... 3-3 polarotor .............................................4-2, 4-10 program satellites ...................................... 4-10 select a mode .............................................. 5-1 select a recording ...................................... 5-14 select the alternate audio .......................... 5-13 select the subtitle language ....................... 5-14 set a timer .................................................. 5-11 set the channel volume ................................ 5-5 set the local date and time ......................... 5-21 set the tv system ........................................ 5-21 setup after memory erase ............................ 3-4 signal ................................................. 4-8, 4-10 signal indicator ............................................. 4-8 slow motion ...................................... 4-19, 5-15 smart card information ....................... 4-13, 6-4 smatv ........................................................... 3-8 software update ........................................... 6-3 software version ........................................ 4-11 sort ............................................................. 4-16 sort a list ...................................................... 5-2 start time .................................................... 5-11 stb ................................................................ 8-1 stop time .................................................... 5-11 subtitling .......................................... 4-20, 5-14 symbols ....................................................... 1-2 system setup menu ............................. 4-9, 6-1 LNB(F) Configuration matrix Appendix 1 APPENDIX 1 1. LNB CONFIGURATION MATRIX In the installation menu, the different LNBs are already pre-programmed to save you a lot of configuring routines. LNB TYPE Standard LO Selection 13/18V 0/22kHz H V H V 10,000 13/18V 18 18 0 0 Enhanced 9,750 13/18V 18 18 0 0 Quattro 9,750 13V 13 13 0 0 10,750 18V 18 18 0 0 5,150 13/18V 18 18 0 0 DBS 10,750 18V 18 18 0 0 TELECOM 11,475 18V 18 18 0 0 C-Band 2. LO Frequency LNBF CONFIGURATION MATRIX © 2002 EchoStar International Corporation All rights reserved In the installation menu, the different LNBFs are already pre-programmed to save you a lot of configuring routines. LNBF TYPE LO Selection 13/18V 0/22kHz H V H V 10,000 13/18V 18 13 0 0 Enhanced 9,750 13/18V 18 13 0 0 Universal 9,750 0 kHz 18 13 0 0 10,600 22 kHz 18 13 22 22 9,750 0 kHz 18 13 0 0 10,750 22 kHz 18 13 22 22 C-Band 5,150 13/18V 18 13 0 0 C-Band SS 5,150 13V 18 13 0 0 5,750 18V 18 13 0 0 Standard Quattro 3. LO Frequency USER DEFINED LNB(F) MATRIX In the User LNB setting menu, you can define your own LNB(F). You can use the list below to note the settings. User LNB(F) LO Frequency LO Selection 13/18V 0/22kHz H V H V User ........ 1 ... ...,... ... ... ... .../... ... ... ... ... ... ... ... ... ... ... User ........ 2 ... ...,... ... ... ... .../... ... ... ... ... ... ... ... ... ... ... Digital Satellite Receiver Page A1 - 1 A1 Appendix 1 LNB(F) Configuration matrix © 2002 EchoStar International Corporation All rights reserved Page A1 - 2 EchoStar DVR-7000 Viaccess EchoStar Quattro, Programmable Remote Control Unit Appendix 2 APPENDIX 2 1. INTRODUCTION This appendix gives the information necessary for the use of the Quattro with other equipment than the EchoStar receiver. This appendix also contains a code reference list which gives the program code for most of the know TV, video and audio equipment. The Quattro is and infra red (IR) type programmable remote control unit (RCU) that is able to control most functions (basic) of your TV, VCR, DVD and Audio equipment connected to the receiver. You can program the RCU with a code to which your equipment responds. If the code is not available in the supplied code list, the built-in intelligence assists you to find the applicable code. For future use it is recommended that you make a note of the equipment codes and the serial number in the fields below: The RCU is already pre-programmed for the EchoStar receiver with code 0222. TV key: _ _ _ _ VCR key: _ _ _ _ AUX key: _ _ _ _ SAT key: _ _ _ _ © 2002 EchoStar International Corporation All rights reserved Serial Number: _ _ - _ _ _ - _ _ 2. THE BATTERIES The RCU is powered by two 1.5 Volt Alkaline batteries type AA/LR6. We recommend that you do not use rechargeable batteries. At battery change, the RCU keeps the programmed information for a maximum of 15 minutes. 1. Remove the battery cover. 2. Find the battery + and - marks. 3. Insert the batteries accordingly the + and - marks. 4. Install the battery cover. 5. Press the SAT key once, Make sure the key lights up to indicate that it is ready for use. 3. THE KEYS If the RCU is programmed with the correct equipment code, the keys should control the same (basic) functions as the keys on the original remote control unit of that equipment. The functionality of the SAT mode is discussed in the user’s guide of the satellite receiver. The Power key This key controls the On-OFF-STANDBY function. The Mute key To blank out the volume. Mode keys (TV, VCR, AUX, SAT) These keys are programmable to take control over the television, video recorder, DVD-player, audio sets and the satellite receiver. MENU key This key activates the available on-screen menu for the selected equipment. EPG key If the function is available, this key activates the program function for VCR and DVD equipment. Digital Satellite Receiver Page A2 - 1 A2 Appendix 2 EchoStar Quattro, Programmable Remote Control Unit i key If the function is available, this key activates the display/information function for TV, VCR and DVD equipment. Satellite list key This key is not used. Volume +/- keys This key is used to control the volume level for the selected equipment. CH +/- keys This key is used to move one channel up or down for the selected equipment. Arrow cluster To scroll left, up, right or down. Page +/- keys If the function is available, this key activates the tracking +/- function for VCR and surround center +/- for audio equipment (AUX). Recall key This key brings back the last selection. If the function is available, this key activates the random function (AUX). Transport keys These keys operate the transport function of your VCR, DVD and DVR. To prevent accidental recording, the RECORD key is pressed twice to start the recording. Subtitle key If the function is available, this key gives subtitles in DVD mode and may also function in TV mode as white fast text key or menu key. Audio language key If the function is available, this key selects audio language choice for your DVD player and stereo/mono or audio language for your television. Bookmark key This key is dedicated for use in the SAT mode, for detailed information refer to the user’s guide of your satellite receiver. ? key If the function is available, this key activates the ? function for teletext and for some TVs it activates the 16:9 mode. Red, Green, Yellow, Blue and White key If the function is available, this key activates the fast text functions (fast navigation in teletext). For some equipment the key activates the menu function. For detailed information of the fast text functions, please refer to the applicable user’s guide. Page A2 - 2 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved OK key While in a menu, this key is mainly used to confirm a selection. EchoStar Quattro, Programmable Remote Control Unit Appendix 2 Numerical keys The Numerical keys (0-9, TV/RAD, FAV) activates the same functions as available on your original remote control unit, such as direct access program selection. TV/RAD key If the function is available, this key operates as the AV key for TV and as TV/VCR for VCR. FAV key If your original remote control unit uses one/two number keys (usually marked as -/--, 10 or 20), press this key as usual. Teletext keys If the function is available, some transport keys control the main teletext functions. You find the teletext functions under the given keys: teletext off; press the stop key teletext on; press the play key teletext mix; press the rewind key teletext hold; press the pause key teletext expand; press the record key © 2002 EchoStar International Corporation All rights reserved 4. PROGRAM THE TV, VCR AND AUX KEY You can program the mode keys (TV, VCR, AUX) with only one device per key. ■ The TV key is used to setup the RCU to control your basic TV functions; ■ The VCR key is used to setup the RCU to control your basic VCR or DVD functions; ■ The AUX key is used to setup the RCU to control your amplifier, tuner or miscellaneous audio equipment. You can program the SAT mode keys to control a number of satellite receivers. The RCU is default programmed to control the EchoStar satellite receiver that came in the same box. NOTE Some codes are quite similar. If your device does not respond or does not function properly with one of the codes, try another code listed under your brand. 4.1. SETUP WITH USE OF THE EQUIPMENT CODE LIST NOTE The procedures to set the RCU for the TV, VCR, DVD and Audio equipment is identical, therefor only the procedure to setup the TV is given. 1. 2. 3. 4. 5. 6. 7. Find your brand in the equipment code list. Switch your TV to on and make sure a broadcast is seen. On the RCU, press the TV key continuously until the indicator stays on. Release the TV key and make sure the indicator blinks continuously. Use the numerical keys to enter the first code that is listed behind your brand name. Monitor the TV key and note that the indicator blinks three times. Aim the RCU at your TV and press the on/standby key and make sure the TV switches off. 8. Now the RCU is programmed to control your TV. 9. If there is no response aim and press again. If there is no response, the first code is not valid for your TV. Repeat the previous steps with the next code given. 10. If the TV does not respond at the last code, continue with the next procedure Digital Satellite Receiver Page A2 - 3 A2 Appendix 2 EchoStar Quattro, Programmable Remote Control Unit 4.2. SETUP WITH USE OF THE SEARCH CODE FEATURE NOTE ■ A completed search is indicated by eight blinks. If the original remote control unit for the VCR, DVD or audio device does not have a on/off key: before you continue insert a tape or disk before you continue; ■ For some codes the play or Volume + key might work. ■ 1. 2. 3. 4. 5. 6. 7. 8. 9. Switch your TV to on and make sure a broadcast is seen. On the RCU, press the TV key continuously until the indicator stays on. Release the TV key and make sure the indicator blinks continuously. On the RCU, press the on/standby key and make sure the indicator of the TV key stays on. Press the up key once and see if the TV switches off. Make sure you wait at least 2 seconds to allow the TV to respond. If the TV does not switch off, repeat step 5 until the TV switches off. After the TV switched off, press the OK key to store the code. On the RCU, press the on/off key. See that the TV key blinks once and the TV switches on. Now your are ready to read-out the code from the memory for future use. NOTE You can read out the code from the RCU, just blink back the code. It is handy for future reference. Remember you only can blink back the code after the RCU operates your device. 1. 2. 3. 4. Switch your TV to on and make sure a broadcast is seen. On the RCU, press the TV key continuously until the indicator stays on. Release the TV key and make sure the indicator blinks continuously. Use the numerical keys to enter code 9 9 0. 5. Monitor the TV key and note that the indicator goes off and stays off. NOTE The amount of blinks gives you the first number, no blinks indicate a 0. 6. 7. 8. 9. 10. 11. 5. Press the numerical key 1 and count the blinks for the first number. Press the numerical key 2 and count the blinks for the second number. Press the numerical key 3 and count the blinks for the third number. Press the numerical key 4 and count the blinks for the fourth number. Write the code, with a permanent pen, in the boxes in the battery cover and this manual. Now the RCU is programmed to control your TV. SPECIAL SETUP FUNCTIONS It is possible to control a second TV or VCR with your RCU. One of the other mode keys (TV, VCR, AUX) must be sacrificed in this case. It is not possible to sacrifice the SAT key. It is also possible to control another (up to 16) EchoStar receivers that use the equipment code 0222. This is done with use of the address feature in the SAT mode. Page A2 - 4 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved 4.3. READ OUT THE EQUIPMENT CODE EchoStar Quattro, Programmable Remote Control Unit Appendix 2 5.1. SETUP A SECOND TV OR VCR NOTE The procedure to assign a second TV or VCR is identical, therefor only the procedure to assign the second TV is given. 1. 2. 3. 4. 5. 6. 7. On the RCU, press the TV key continuously until the indicator stays on. Release the TV key and make sure the indicator blinks continuously. Use the numerical keys to enter code 9 9 2. Monitor the TV key and note that the indicator goes on and off and finally stays on. Press the VCR key once and note that the indicator goes on and off and finally stays off. Now the VCR key is assigned as a TV key. Setup the VCR key to control your second TV, refer to chapter 4 for detailed instructions. 5.2. UNDO THE SETUP OF A SECOND TV OR VCR NOTE © 2002 EchoStar International Corporation All rights reserved The procedure to undo an assignment for the TV or VCR is identical, therefor only the procedure to undo the assignment of the VCR key as a second TV is given. 1. 2. 3. 4. 5. 6. 7. 6. On the RCU, press the VCR key continuously until the indicator stays on. Release the VCR key and make sure the indicator blinks continuously. Use the numerical keys to enter code 9 9 2. Monitor the VCR key and note that the indicator goes on and off and finally stays on. Press the VCR key once and note that the indicator goes on and off and finally stays off. Now the VCR key is assigned as a VCR key. Setup the VCR key to control your VCR, refer to chapter 4 for detailed instructions. SPECIAL FUNCTIONS 6.1. VOLUME LOCK (PUNCH THROUGH) The RCU allows you to select the device that you want to control the volume of, independently from any other mode. As an example, if you are in the SAT mode, you can stay in the SAT mode and adjust the volume of the TV directly with the volume +/- key. NOTE The procedures to set the volume lock for the TV, VCR, DVD and Audio equipment is identical, therefor only the procedure to set the volume lock for the TV is given. 1. 2. 3. 4. 5. 6. On the RCU, press the TV key continuously until the indicator stays on. Release the TV key and make sure the indicator blinks continuously. Use the numerical keys to enter code 9 9 3. Press the TV key once. Monitor the TV key and note that the indicator blinks three times. Now the volume control is locked to the TV except for the AUX mode. 6.2. RESET VOLUME LOCK (PUNCH THROUGH) 1. 2. 3. 4. 5. On the RCU, press the SAT key continuously until the indicator stays on. Release the SAT key and make sure the indicator blinks continuously. Use the numerical keys to enter code 9 9 3. Press the Volume + key once and note that the indicator blinks four times. Now the volume control is unlocked to control the device that belongs to that key. Digital Satellite Receiver Page A2 - 5 A2 Appendix 2 EchoStar Quattro, Programmable Remote Control Unit 6.3. REAL-TIME MACROS This feature allows you to program a macro on any key. With a macro you can assign a chain of key strokes to any key on the RCU, also on a mode key. The macros are recorded and played real-time, which means the actual time between key strokes will also be recorded. 6.3.1. DEFINE A MACRO NOTE ■ You have to complete the macro within a maximum of 8 key strokes. ■ If a mode key is used within a macro then all keys pressed after this mode key will follow that mode until another mode key is pressed. ■ Nested macros are not possible, in other words you cannot start another macro within a macro. 1. 2. 3. 4. 5. 6.3.2. PLAY BACK A MACRO If a macro is recorded under any key, not being a mode key, press the key and the macro plays back, for a macro under a mode key you have to press the key twice within two seconds. 6.3.3. DELETE A MACRO 1. 2. 3. 4. 5. 6. On the RCU, press the SAT key continuously until the indicator stays on. Release the SAT key and make sure the indicator blinks continuously. Use the numerical keys to enter code 9 9 5 and note that the indicator stays on. Choose and press the key for the macro that you want to delete. Press the SAT key for three seconds to delete the macro. Note that the indicator blinks three times. Now the macro is deleted successfully and the original key function is restored. 6.4. FACTORY RESET You can do either a functional reset which means that all personal programs as volume lock and real-time macros are lost. All equipment codes will remain. A full factory reset is done if you want to delete all personal programming as well as the equipment codes. This procedure will return the factory settings which you can customize later. 6.4.1. FUNCTIONAL RESET 1. 2. 3. 4. Page A2 - 6 On the RCU, press the SAT key continuously until the indicator stays on. Keep the SAT key pressed. Use the numerical keys to enter code 9 8 0 and note that the indicator blinks four times. Now the RCU is programmed with the factory settings and ready for reprogramming. EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved 6. On the RCU, press the SAT key continuously until the indicator stays on. Release the SAT key and make sure the indicator blinks continuously. Use the numerical keys to enter code 9 9 5 and note that the indicator stays on. Choose and press the key which you want to assign for the macro. This can be any key, but after the recording it’s original function is lost. Immediately program the macro as required, after the final key stroke press the SAT key for three seconds to close the macro. Note that the indicator blinks three times. Now the macro is recorded successfully and ready for use. EchoStar Quattro, Programmable Remote Control Unit Appendix 2 6.4.2. FULL FACTORY RESET 1. 2. 3. 4. 7. On the RCU, press the SAT key continuously until the indicator stays on. Keep the SAT key pressed. Use the numerical keys to enter code 9 8 1 and note that the indicator blinks four times. Now the RCU is programmed with the factory settings and ready for reprogramming. TROUBLESHOOTING Problem Possible cause What to do? 1. Device does not respond to the RCU. ■ ■ You did not select the correct code for the device. 2. One of the mode keys ■ Batteries are empty. blinks twice when a key is pressed but the device does not respond. © 2002 EchoStar International Corporation All rights reserved 3. Device does sometimes not respond to the RCU. 4. Your device code is not listed. A2 Try all the codes listed for your brand. ■ Try the search method. ■ Insert new batteries. Close the sun blinds or get closer to the device. ■ Direct sun light from behind the device. ■ ■ You do not aim sufficiently at the device. ■ ■ Batteries are almost empty. ■ Insert new batteries. ■ The device code was not know at the time this manual was created. ■ Try the search method. 5. The RCU does not exe■ Some codes are quite cute the commands propsimilar, maybe you have erly. chosen the wrong code. Aim at the device’s display. ■ install a RCU extender. ■ Try another code listed for your brand. ■ Try the search method. 6. Volume control does not respond as expected. ■ Volume is locked to another device. ■ Undo the volume lock (punch through) function. 7. Video does not record. ■ You pressed the record key once. ■ Press the record key twice to start. The RCU has a safety feature to avoid a start of an unwanted recording. 8. The RCU gives still prob- ■ Your customized settings lems. are corrupted. Digital Satellite Receiver ■ Do an operational reset. ■ Do a factory reset. Page A2 - 7 Appendix 2 EchoStar Quattro, Programmable Remote Control Unit 8. EQUIPMENT CODES 8.1. ECHOSTAR SATELLITE RECEIVERS AD2000 IP 8.2. 0453 AD3000 series 0222 D2500 IP 0511 DSB1100 1086 DSB2000 0853 DSB9800 0871 DVR-7000 series 0222 IR700 0312 LT7500 0465 LT80+ 0688 LT8700 0454 SR1500 0218 SR200 I.P 0713 SR4500 0100 SR5500 0170 ECHOSTAR KEY ASSIGNMENTS KEY DSB9800 LT8700 LT80+ SR4500 SR1500 Power/Stby Power/Stby Power/Stby Power/Stby Power/Stby Select SAT mode Select SAT mode Select SAT mode Select SAT mode Select SAT mode Select SAT mode Select TV mode Select TV mode Select TV mode Select TV mode Select TV mode Select TV mode Select VCR mode Select VCR mode Select VCR mode Select VCR mode Select VCR mode Select VCR mode - - - - - - 1 1 1 1 1 1 2 2 2 2 2 2 3 3 3 3 3 3 4 4 4 4 4 4 5 5 5 5 5 5 6 6 6 6 6 6 7 7 7 7 7 7 8 8 8 8 8 8 9 9 9 9 9 9 0 0 0 0 0 0 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved Page A2 - 8 DSB2000 Power/Stby EchoStar Quattro, Programmable Remote Control Unit Appendix 2 8.2. ECHOSTAR KEY ASSIGNMENTS (CONTINUED) KEY DSB2000 DSB9800 LT8700 LT80+ TONERadio guide select A/V TV/SAT-TV or sat. select X- Favorite IRD FAVORITE SR4500 SR1500 RADIO/SAT- FCH, fav list Radio or MUTEMUTEMUTEMUTEMUTEMUTEVolume Mute Volume Mute Volume Mute Volume Mute Volume Mute Volume Mute IRD IRD IRD IRD IRD IRD Channel up IRD Cursor up IRD Channel up IRD Ch up IRD Ch up IRD Channel up IRD Channel DOWN IRD Cursor down IRD Channel DOWN IRD Ch down IRD Ch down IRD Channel DOWN IRD Volume up IRD Cursor left IRD Volume up IRD Vol- IRD Volume up IRD Volume up IRD Volume down IRD Cursor right IRD Volume down IRD Vol+ IRD Volume down IRD Volume down IRD ERASE RECALL © 2002 EchoStar International Corporation All rights reserved ->EXIT- IRD EPG- EPG RECALL SAT Guide SERV- Info subscription MenuNavigator IRD MenuNavigator IRD Up cursor IRD Cursor up IRD STORE ENTER- Ok IRD CLAMP MENU MenuNavigator IRD FORMATformat SETUP Setup menu IRD Ch up IRD VIDEO FINE- up TUNING- up IRD Ch DOWN IRD VIDEO FINE- down TUNINGdown IRD Down cursor Cursor down IRD IRD Left cursor IRD Cursor left IRD Left cursor IRD Tuning < SKEW- down Right cursor IRD Cursor right IRD Right cursor IRD Tuning > SKEW- up OK- IRD OK- IRD SELECTstore settings STOREstore IRD INFO- Info prog IRD Info- Info IRD CANCELcancel E- Function key ESCEscape, exit IRD VIEW CANCELcancel IRD === - MAC teletekst WEST- move dish west A- Function key B- Function key Digital Satellite Receiver ENTERstore selection VIDEO DEVIA VIEW POSITION SAT- Page A2 - 9 A2 Appendix 2 EchoStar Quattro, Programmable Remote Control Unit 8.2. ECHOSTAR KEY ASSIGNMENTS (CONTINUED) KEY LT8700 LT80+ C- Function key DSB2000 DSB9800 <| |> enlarge screen STOP- stop moving dish D- Function key =?= subtitiling select EAST- move dish east --- subtitling on/off subtitling +- Add. Info, subtitling KEY Ext SR1500 P.LOCK- set change p. Lock AUDIO DEEMPH P.LOCK- set change p. Lock TUNE AUDIOaudio menu BANDWITH AUDIO PPV VIDEOvideo menu POLARITY D2500 I.P. AD2000 I.P. SR200 I.P. SR5500 LT7500 SR5500 Power/Stby Power/Stby Power/Stby Power/Stby Power/Stby Power/Stby Select SAT mode Select SAT mode Select SAT mode Select SAT mode Select SAT mode Select SAT mode Select TV mode Select TV mode Select TV mode Select TV mode Select TV mode Select TV mode Select VCR mode Select VCR mode Select VCR mode Select VCR mode Select VCR mode Select VCR mode Select AUX mode Select AUX mode Select AUX mode Select AUX mode Select AUX mode Select AUX mode 1 1 1 1 1 1 2 2 2 2 2 2 3 3 3 3 3 3 4 4 4 4 4 4 5 5 5 5 5 5 6 6 6 6 6 6 7 7 7 7 7 7 8 8 8 8 8 8 9 9 9 9 9 9 0 0 0 0 0 0 TV/Radio select TV/Radio select RADIO -TV/ Radio select Favorite Favorite FAV/MAINFavorite or main list FAV, CANCEL EchoStar DVR-7000 FAV, CANCEL Viaccess © 2002 EchoStar International Corporation All rights reserved Page A2 - 10 TV/SAT Select TV or DBS SR4500 EchoStar Quattro, Programmable Remote Control Unit Appendix 2 KEY D2500 I.P. AD2000 I.P. SR200 I.P. SR5500 LT7500 SR5500 © 2002 EchoStar International Corporation All rights reserved MUTEMUTEMUTEMUTEMUTEMUTEVolume Mute Volume Mute Volume Mute Volume Mute Volume Mute Volume Mute IRD IRD IRD IRD IRD IRD Channel up IRD Channel up IRD Channel + IRD Channel up IRD TUNING- up IRD Channel up IRD Channel DOWN IRD Channel DOWN IRD Channel IRD Channel DOWN IRD TUNINGdown IRD Channel DOWN IRD Volume up IRD Volume up IRD Volume + IRD Volume up IRD Volume up IRD Volume up IRD Volume down IRD Volume down IRD Volume IRD Volume down IRD Volume down IRD Volume down IRD TV/DBSSelect TV or DBS TV- Select TV or Sat TES Internal sync toggle Guide - IRD Guide - IRD SAT-List of satellites SAT-List of satellites MenuNavigator IRD MenuNavigator IRD Channel up IRD Channel up IRD Up cursor IRD TUNING- up IRD Channel DOWN IRD Channel DOWN IRD Down cursor IRD TUNINGdown IRD Volume down IRD Volume down IRD Left cursor IRD <- TUNING <- TUNING <- TUNING Volume up IRD Volume up IRD Right cursor IRD -> TUNING -> TUNING -> TUNING OK/Store IRD OK/Store IRD STORE- IRD STOREstore settings ENTERstore selection STOREstore settings Info IRD Info IRD Exit IRD Exit IRD INDEXsystem info MASK SCAN - dish par. MASK ENTER SATELLITE MenuNavigator IRD ENTER SATELLITE EXTRA FEATURES CANCEL Cancel IRD WEST- move dish west DIG/ANADigital analog toggle IRD Digital Satellite Receiver EXTRA FEATURES DOWN/ CANCEL Pos. control TUNING SELECT SAT/STOREPos. control TUNING SELECT FSS/DBS SKEW- skew setting FSS/DBS EAST- move dish east AUDIO BANDWITH UP/ERASE Pos. control AUDIO BANDWITH TIMER- set timer AUDIO DEEMPH BRF/TEF AUDIO DE-EMPH Page A2 - 11 A2 Appendix 2 EchoStar Quattro, Programmable Remote Control Unit KEY 8.3. 8.4. 8.5. AD2000 I.P. SR200 I.P. SR5500 LT7500 SR5500 Speaker ALT- Audio language toggle LOCK- set change par. Lock STEREO AUDIOaudio parameters STEREO UHF-Select TV or DBS BACKBackground toggle MIXBackground toggle FORMAT VIDEOvideo menu FORMAT AMPLIFIERS Arcam 0641 Pioneer Bush 0421 Sansui 0013, 0300 0321 Cyrus 0683 Sherwood 0711 Denon 0272 Sony 0689 Goodmans 0421, 0847 Tevion 1129 JBL 0668, 1177 Videologic 1095 Kenwood 0772 Yamaha 0354 Philips 0641 MISCELLENEOUS AUDIO Goodmans 0841 Uher 0841 Sanyo 0871, 0882 Videologic 1179 0440 RECEIVERS Aiwa 0121, 1405, 1188 Okano Akai 0115, 0440 Onkyo 0135 Arcam 0642 Panasonic 0763 Audiolab 1189 Philips 0642, 1089, 1189, 1269, 1289 0502 Bang & Olufsen 0799 Phonotrend Denon 1104, 1160 Pioneer 0289, 1107, 1143 Fine Arts 1189 RCA 1254, 1123 Fisher 0360 Sanyo 0219, 0360 Goodmans 0440 Sharp 0262 Grundig 0219, 1131, 1189, 1192 Sherwood 0491, 0502, 0653, 1050 Harman/Kardon 0110 Sony 1058, 1158, 1258 JVC 0074, 0464 Technics 0208, 1135, 1308, 1309, 1518 Kenwood 1027, 1313, 1569, 1570 Thomson 1254 Marantz 0219, 0412, 1089, 1189 Thorens 1189 Memorex 1024 Venturer 1033 Micromega 1189 Wharfedale 0440 Mitsubishi 0440 Yamaha 0176, 0712, 1276 Myryad 1189 TELEVISIONS AGB 0516 M Electronic 0009, 0037, 0057, 0104, 0105, 0109, 0163, 0217, 0346, 0374, 0480 ASA 0087, 0104 MTC 0349, 0512 Acura 0009 Magnadyne 0087, 0102, 0247, 0516 Admiral 0087, 0163 Magnafon 0102, 0516 Adyson 0032, 0217 Magnum 0648 Aiwa 0701 Manesth 0217, 0235, 0264 Akai 0208, 0361, 0516, 0602, 0708 Marantz 0037, 0556 Akito 0272 Marelli 0087 Akura 0218, 0264, 0358, 0493 Mark 0037 Page A2 - 12 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved 8.6. D2500 I.P. EchoStar Quattro, Programmable Remote Control Unit Appendix 2 8.6. TELEVISIONS (CONTINUED) © 2002 EchoStar International Corporation All rights reserved Alba 0009, 0036, 0037, 0211, 0218, 0235, 0371, 0581, 0668 Matsui 0009, 0037, 0211, 0294, 0443, 0011, 0072, 0217, 0354, 0487, 0035, 0177, 0235, 0355, 0516, 0036, 0208, 0272, 0371, 0579 Allorgan 0294 McMichael 0043 Amplivision 0217, 0400 Mediator 0012, 0037 Amstrad 0009, 0037, 0171, 0177, 0354, 0371, 0412, 0433, 0516 Medion 0668 Anitech 0009 Memorex 0009, 1037 Arc En Ciel 0501, 0568 Memphis 0337 Arcam 0216, 0217 Metz 0087, 0275, 0367, 0388, 0447 A2 Asuka 0218 Minerva 0070, 0237, 0487 Atlantic 0206 Minoka 0412 Audiosonic 0037, 0109 Mitsubishi 0033, 0036, 0087, 0108, 0237, 0354, 0512, 0691 Autovox 0087, 0206, 0237, 0336 Mivar 0216, 0290, 0291, 0292, 0516, 0609 0009, 0102, 0216 BPL 0282 Multitech BSR 0294 Myryad 0556 BTC 0218 NEC 0170, 0704 Bang & Olufsen 0087, 0565 NEI 0037, 0337 Barco 0380 National 0237 Basic Line 0009, 0218 Neckermann 0037, 0087, 0191, 0349, 0505, 0556 Baur 0010, 0037, 0349, 0361, 0505, 0512 Nesco 0179 Beko 0370, 0486, 0714, 0715 Nikkai 0032, 0035, 0037, 0072, 0216, 0218, 0264, 0337 0102 Beon 0037 Nobliko Bestar 0626 Nogamatic 0501, 0568 Binatone 0217 Nokia 0361, 0473, 0480, 0548, 0606, 0631 Blaupunkt 0191, 0195, 0200, 0327, 0328 Nordmende 0109, 0196, 0198, 0501, 0560, 0568 0163, 0361 Blue Sky 0218, 0668, 1037 Oceanic Blue Star 0282 Onwa 0433 Bondstec 0247 Orion 0037, 0177, 0235, 0294, 0355, 0364, 0443, 0516, 0655 Boots 0217 Osaki 0032, 0072, 0217, 0218, 0264, 0412, 0493 Brandt 0109, 0196, 0198, 0335 Oso 0218 Brandt Electronic 0501, 0568 Osume 0032, 0072, 0157 Brionvega 0087 Otto Versand 0010, 0036, 0037, 0191, 0217, 0349, 0505, 0512, 0556 Britannia 0216 Palladium 0370, 0418 Bruns 0087 Panama 0217, 0264 Bush 0009, 0218, 0349, 0519, Panasonic 0126, 0163, 0214, 0226, 0237, 0250, 0274, 0367, 0650 0216, 0238 0036, 0272, 0355, 0581, 0037, 0211, 0282, 0294, 0371, 0374, 0668 CGE 0074, 0084, 0247 Pathe Cinema CS Electronics 0216 Pathe Marconi 0196, 0198, 0501, 0568 CTC 0247 Pausa 0009 Carrefour 0036 Phase 0032 Cascade 0009 Philco 0074, 0084, 0087, 0247 Cathay 0037 Philips 0012, 0037, 0043, 0087, 0193, 0374, 0556 Centurion 0037 Phoenix 0087 Digital Satellite Receiver Page A2 - 13 Appendix 2 EchoStar Quattro, Programmable Remote Control Unit 8.6. TELEVISIONS (CONTINUED) Century 0087 Phonola 0012, 0037, 0087 Cimline 0009 Pioneer 0109, 0163, 0166 Clarivox 0037 Prandoni Prince 0516 Clatronic 0247, 0370 Profex 0009, 0361 Condor 0370 Protech 0009, 0037, 0102, 0217, 0247, 0264, 0337, 0418, 0668 Contec 0009, 0036, 0216 Pye 0012 Continental Edison 0196, 0198, 0399, 0501, 0568 Quelle 0010, 0011, 0037, 0070, 0074, 0084, 0104, 0200, 0327, 0328, 0361, 0505, 0512 Crosley 0074, 0084, 0087 Questa 0036 Crown 0009, 0037, 0370, 0418, 0579 R-Line 0037 0070 Cybertron 0218 RBM Daewoo 0009, 0037, 0374, 0499 RFT 0087, 0428 Dainichi 0218 Radiola 0012, 0037 Dansai 0037 Radiomarelli 0087, 0516 Dayton 0009 Rank Arena 0036 0208, 0548 Rediffusion 0361 Decca 0037, 0072, 0272, 0516 Revox 0037 Denon 0145 Rex 0163, 0206, 0259, 0264 Dixi 0009, 0037 Roadstar 0009, 0218, 0264, 0418 Dual 0336, 0519 Runco 0603 Dual Tec 0217 SBR 0012, 0037, 0043, 0193 Dumont 0070, 0087 SEG 0036, 0217, 0264, 0668 Elbe 0259 SEI 0010, 0087, 0102, 0177, 0294, 0516 Elin 037, 0548 Saba 0087, 0109, 0163, 0196, 0198, 0335, 0501, 0568 Elite 0218 Saccs 0238 Elta 0009 Sagem 0610 Emerson 0087, 0361 Saisho 0009, 0011, 0033, 0177, 0211, 0235, 0264, 0354, 0516 Erres 0012, 0037 Salora 0163, 0194, 0349, 0356, 0359, 0361, 0548 Europhon 0516 Sambers 0102, 0516 Expert 0206 Samsung 0009, 0037, 0060, 0217, 0264, 0290, 0370, 0556, 0587 Ferguson 0037, 0073, 0109, 0190, 0193, 0238, 0324, 0335, 0560 Sandra 0216 Fidelity 0193, 0216, 0361 Sanyo 0011, 0036, 0045, 0072, 0104, 0157, 0208, 0339 Finlandia 0208, 0346, 0359 Schaub Lorenz 0361 Finlux 0037, 0070, 0072, 0087, 0104, 0105, 0179, 0346, 0411, 0516 Schneider 0037, 0057, 0218, 0247, 0303, 0336, 0371, 0394, 0668 Firstline 0009, 0216, 0217, 0247, 0294, 0668 Seleco 0163, 0206, 0259, 0411 Fisher 0104, 0208, 0217, 0303, 0370, 0555 Sentra 0035 Flint 0455 Sharp 0036, 0093, 1093, 1193 Forgestone 0193 Shorai 0294 Formenti 0037, 0087 Siarem 0087, 0102, 0516 Frontech 0163, 0247, 0264, 0448 Siemens 0037, 0157, 0191, 0195, 0200, 0327, 0328 Fujitsu 0072, 0206, 0683 Silver 0036 Funai 0179, 0264, 0294, 0303 Singer 0087 Page A2 - 14 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved De Graaf EchoStar Quattro, Programmable Remote Control Unit Appendix 2 8.6. TELEVISIONS (CONTINUED) © 2002 EchoStar International Corporation All rights reserved GEC 0037, 0043, 0072, 0217, 0516 Sinudyne 0010, 0087, 0102, 0177, 0235, 0294, 0516 GPM 0218 Skantic 0356 Geloso 0009 Solavox 0032, 0163 Genexxa 0163, 0218 Sonitron 0208 GoldStar 0037, 0109, 0217, 0290, 0377 Sonoko 0009, 0037 Goodmans 0036, 0037, 0072, 0179, 0217, 0235, 0364, 0371, 0374, 0499, 0624 Sonolor 0163, 0208 Gorenje 0370 Sontec 0037 Graetz 0163, 0361 Sony 0010, 0011, 0036, 0505, 1505, 1651 Granada 0037, 0045, 0072, 0208, 0217, 0339, 0359, 0516 Soundwave 0037, 0418 Grandin 0282, 0610 Standard 0009, 0217, 0218 Grundig 0070, 0191, 0195, 0237, 0487, 0556, 0587 Stern 0163, 0206, 0259 HCM 0009, 0282, 0412 Sunkai 0294, 0355 Hanseatic 0037, 0361, 0428, 0556 Susumu 0218 Hantarex 0516 Sysline 0037 Hifivox 0501, 0568 T + A 0447 Hinari 0009, 0036, 0037, 0179, 0218 Tandy 0072, 0163, 0217, 0218, 0276 Hisawa 0282, 0400, 0455 Tashiko 0036, 0043, 0217, 0359 Hitachi 0032, 0105, 0196, 0349, 0548, Tatung 0037, 0072, 0217, 0516 0217, 0247 0036, 0109, 0198, 0356, 0563, 0043, 0145, 0217, 0441, 0578 0044, 0163, 0225, 0481, Huanyu 0216, 0374 Tec Hypson 0037, 0264, 0282 Technics 0250, 0650 ICE 0217, 0264, 0371 Technol Ace 0179 A2 ICeS 0218 Teleavia 0501, 0568 ITS 0371 Telefunken 0074, 0084, 0101, 0109, 0262, 0335, 0471, 0498, 0501, 0568, 0625 ITT 0163, 0361, 0548 Teletech 0009 Imperial 0074, 0084, 0247, 0370, 0418 Teleton 0036, 0206, 0217, 0349 Indesit 0237 Tensai 0218, 0294 Indiana 0037 Texet 0216, 0218 Ingelen 0163 Thomson 0109, 0196, 0198, 0237, 0349, 0399, 0501, 0568 Inno Hit 0072, 0516 Thorn 0035, 0037, 0072, 0074, 0084, 0104, 0190, 0192, 0193, 0361, 0499, 0505, 0512 Interfunk 0037, 0163, 0247, 0361, 0501, 0512, 0568 Tomashi 0282 Intervision 0037, 0102, 0217, 0264, 0377, 0654 Toshiba 0035, 0036, 0070, 0243, 0508, 1508 Isukai 0218 Triumph 0177, 0243, 0516 JVC 0036, 0053, 0094, 0190, 0192, 0371, 0606, 0643, 0653 Uher 0206, 0303 Kaisui 0009, 0216, 0217, 0218, 0282 Ultra 0192 Kapsch 0163, 0206 Ultravox 0102 Karcher 0610 Universum 0037, 0104, 0105, 0264, 0346, 0370, 0492 0037 Kathrein 0556 Vestel Kendo 0037, 0235 Videosat 0247 Kingsley 0216 Videotechnic 0217 Digital Satellite Receiver Page A2 - 15 Appendix 2 EchoStar Quattro, Programmable Remote Control Unit 8.6. 8.7. TELEVISIONS (CONTINUED) Kneissel 0259, 0435 Voxson 0087, 0163 Korpel 0037 Waltham 0217, 0356 Korting 0087 Watson 0037 Koyoda 0009 Watt Radio 0102 Leyco 037, 0072, 0264, 0294 Wega 0036, 0087 Liesenk & Tter 0037 White Westinghouse 0037, 0216 Lloytron 0032 Yoko 0037, 0217, 0264 Zanussi 0206 0038, 0041, 0067 Loewe 0087, 0512 Luma 0206 Luxor 0194, 0237, 0349, 0356, 0361 VIDEO RECORDERS ASA 0037, 0081 NEC Aiwa 0000, 0307, 0348, 0352 Neckermann 0081 Akai 0041, 0106, 0315 Nesco 0072 Akiba 0072 Nokia 0041, 0046, 0104, 0106, 0240 Akura 0271 Nordmende 0041, 0320, 0321, 0384, 0494 Alba 0020, 0072, 0278, 0293, 0315, 0333, 0334, 0352, 0554 Oceanic 0000, 0041 0020, 0554 Okano 0315, 0348 0000, 0278, 0325, 0332 Orion 0004, 0333, 0334, 0343, 0348, 0352 0000, 0037, 0072 Anitech 0072 Osaki Asuka 0037 Otto Versand 0081 Baird 0000, 0041, 0104, 0107 Palladium 0006, 0037, 0041, 0072 Bang & Olufsen 0013, 0499 Panasonic 0162, 0226, 0227, 0454, 0459, 1162 Basic Line 0020, 0072, 0278, 0554 Pathe Marconi 0041 Blaupunkt 0003, 0006, 0034, 0154, 0162, 0195, 0226, 0227 Pentax 0042 Blue Sky 0278 Perdio 0000 Brandt 0320, 0321, 0493 Philco 0038 Brandt Electronic 0041 Philips 0081, 0146, 0384 Bush 0072, 0278, 0293, 0333, 0334, 0352 Phonola 0081 0067, 0081 CGE 0000 Pioneer Catron 0020, 0554 Portland 0020, 0554 Cimline 0072 Profex 0322 Clatronic 0020, 0554 Profitronic 0240 Combitech 0352 Proline 0000, 0293 Condor 0020, 0554 Pye 0081 Crown 0020, 0072, 0278, 0554 Quartz 0046 Cyrus 0081 Quelle 0081 Daewoo 0020, 0278, 0554 Radiola 0081 Dansai 0072 Rex 0041, 0384 De Graaf 0042, 0166 Roadstar 0037, 0072, 0240, 0278 Decca 0000, 0081 SBR 0081, 0146 Denon 0042 SEG 0240, 0322 Dual 0041 SEI 0004, 0081 Dumont 0000, 0081, 0104 Saba 0041, 0206, 0207, 0320, 0321, 0384, 0494, 0530 ESC 0240, 0278 Saisho 0004 Elbe 0038 Salora 0043, 0046, 0106 Elcatech 0072 Samsung 0240, 0432 Page A2 - 16 EchoStar DVR-7000 Viaccess © 2002 EchoStar International Corporation All rights reserved Ambassador Amstrad EchoStar Quattro, Programmable Remote Control Unit Appendix 2 8.7. VIDEO RECORDERS (CONTINUED) © 2002 EchoStar International Corporation All rights reserved Ferguson 0041, 0107, 0320, 0321, 0493 Sansui 0041, 0067, 0271 0046, 0104 Fidelity 0000 Sanyo Finlandia 0081, 0104 Saville 0352 Finlux 0000, 0042, 0081, 0104 Schaub Lorenz 0000, 0041, 0104 Firstline 0037, 0043, 0045, 0072 Schneider 0000, 0072, 0081 Fisher 0046, 0047, 0054, 0104 Seleco 0041 Frontech 0020, 0554 Sentra 0020, 0554 Funai 0000 Sharp 0048, 0062 GEC 0081 Shintom 0072, 0104 A2 General 0020, 0554 Shorai 0004 GoldHand 0072 Siemens 0003, 0006, 0037, 0054, 0081, 0104, 0146, 0195 GoldStar 0037 Silva 0037 Goodmans 000, 0020, 0037, 0062, 0072, 0278, 0343, 0554, 0637 Singer 0045 Graetz 0041, 0104, 0240 Sinudyne 0004, 0081 Granada 0046, 0081, 0104 Solavox 0020, 0554 Grandin 0000, 0037, 0072 Sonolor 0046, 0062 Grundig 0003, 0006, 0007, 0072, 0081, 0195, 0207, 0226, 0293, 0347, 0349 Sontec 0037 HCM 0072, 0293 Sony 0011, 0032, 0033, 0034, 1032 Hanseatic 0037 Sunkai 0348 Hinari 0004, 0072, 0240, 0293, 0352 Sunstar 0000 Hitachi 0000, 0004, 0041, 0042, 0166, 0240, 0544 Suntronic 0000 Hypson 0072 Tashiko 0000 ITT 0041, 0046, 0104, 0106, 0240, 0384 Tatung 0000, 0041, 0081 ITV 0020, 0037, 0278 Tec 0020, 0554 Imperial 0000 Technics 0162, 0226 Ingersol 0004 Teleavia 0041, 0493 Interfunk 0081 Telefunken 0041, 0320, 0321, 0384, 0493, 0494, 0529, 0580 JVC 0008, 0041, 0067, 0206, 0207, 0384 Tenosal 0072 Kaisui 0072 Tensai 0000, 0322 Kendo 0106 Thomson 0041, 0320, 0384, 0493, 0494, 0528 Kenwood 0041 Thorn 0041, 0104 Korpel 0072 Toshiba 0041, 0043, 0045, 0081, 0384 Lenco 0278 Towada 0322 Leyco 0072 Uher 0240 Loewe 0004, 0006, 0037, 0081, 0162, 0454, 1162 Universum 0000, 0006, 0037, 0081, 0106, 0195, 0240, 0325 Logik 0004, 0240 Yamishi 0072 Luxor 0043, 0046, 0048, 0062, 0104, 0106 Yokan 0072 M Electronic 0000, 0038 Yoko 0020, 0240, 0554 Manesth 0045, 0072 Thorn 0041, 0104 Marantz 0003, 0006, 0062, 0081, 0146 Toshiba 0041, 0043, 0045, 0081, 0384 0322 Matsui 0004, 0348, 0352 Towada Memorex 0000, 0037, 0046, 0104 Uher 0240 Memphis 0072 Universum 0000, 0006, 0037, 0081, 0106, 0195, 0240, 0325 Digital Satellite Receiver Page A2 - 17 Appendix 2 EchoStar Quattro, Programmable Remote Control Unit 8.7. VIDEO RECORDERS (CONTINUED) Metz 8.8. 0003, 0006, 0037, 0162, 0195, 0227, 0347, 0454, 0459, 1162 Yamishi 0072 Minerva 0006, 0195 Yokan 0072 Mitsubishi 0043, 0067, 0075, 0081, 0608 Yoko 0020, 0240, 0554 Multitech 0000, 0072 Murphy 0000 Myryad 0081 DVD Akai 0611 Samsung 0573 Bush 0690 Sharp 0630 Denon 0490 Sony 0533 JMB 0695 Technics 0490 JVC 0558 Thomson 0551 Kenwood 0490, 0534 Toshiba 0503 Oritron 0651 Wharfedale 0686 Panasonic 0490, 0703 Yamaha 0668 Philips 0539 Yamakawa 0665 Pioneer 0525, 0571 Proline 0652 © 2002 EchoStar International Corporation All rights reserved Page A2 - 18 EchoStar DVR-7000 Viaccess
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Producer : Acrobat Distiller 4.05 for Windows Author : Jan.Hendriks Title : dvr7000hddvcs_b_1a_us.book Modify Date : 2002:03:26 14:20:14+01:00 Create Date : 2002:03:26 13:40:43 Creator : FrameMaker 6.0 Page Count : 100 Page Mode : UseOutlinesEXIF Metadata provided by EXIF.tools