Kenwood Kca Bt300 Users Manual B64 4713 00_10_KCA BT300_KE.indb

KCA-BT300 to the manual 0091036b-0c97-43ab-a459-ac57a0d17a0a

2015-01-23

: Kenwood Kenwood-Kca-Bt300-Users-Manual-262783 kenwood-kca-bt300-users-manual-262783 kenwood pdf

Open the PDF directly: View PDF .
Page Count: 104

Download
Open PDF In Browser	View PDF

KCA-BT300
Bluetooth UNIT

INSTRUCTION MANUAL
APPAREIL Bluetooth

MODE D’EMPLOI
UNIDAD Bluetooth

MANUAL DE INSTRUCCIONES

Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new Bluetooth unit.

For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model KCA-BT300 Serial number

US Residence Only

B64-4713-00_10_KCA-BT300_KE.indb 1

10/03/12 14:51

Contents
Before use

Model List

Basic Operation of hands-free phoning
(Model-A)

Before Use
Making a call
Receiving a call
Call waiting
During a call
Other functions

Basic Operation of hands-free phoning
(Model-B)

Basic Operation of hands-free phoning
(Model-D)

Before Use
Making a call
Receiving a call
Call waiting
During a call
Other functions

2 |

Before Use
Playing Bluetooth Audio

Before Use
Making a call
Receiving a call
Call waiting
During a call
Other functions

Basic Operation of hands-free phoning
(Model-F)

Making a call
Receiving a call
Call waiting (Function of Model-A, B, C, D, E, F)
During a call

Bluetooth Audio

Before Use
Making a call
Receiving a call
Call waiting
During a call
Other functions

Basic Operation of hands-free phoning
(Model-E)

Registering Bluetooth device
Registering Special Bluetooth device
Registering PIN Code
Downloading the Phone Book
Selecting the Bluetooth device You Wish to
Connect
Deleting a Registered Bluetooth device
Adding a Voice Dialing Command
Setting a Voice Command for Category
Downloading the SMS
SMS (Short Message Service)

Remote control

Before Use
Making a call
Receiving a call
Call waiting
During a call
Other functions

Before Use
Making a call
Receiving a call
During a call
Other functions

Function Operation

Before Use
Making a call
Receiving a call
Call waiting
During a call
Other functions

Basic Operation of hands-free phoning
(Model-C)

Basic Operation of hands-free phoning
(Model-G)

Operation of hands-free phoning
(Model-H)

Registering Bluetooth device
Downloading the Phone Book
Hands-Free Control screen
Key Operation
Making a call
Receiving a call
During a call
Other functions

Appendix

Accessories/ Installation Procedure

Connection

Installation

Troubleshooting Guide

Specifications

KCA-BT300

B64-4713-00_10_KCA-BT300_KE.indb 2

10/03/12 14:51

Before use
2WARNING
To prevent injury or fire, take the following
precautions:
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
• Mounting and wiring this product requires skills and
experience. For safety’s sake, leave the mounting
and wiring work to professionals.

2CAUTION
• Do not install the unit in a spot exposed to direct
sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of
water splashing.

Notes
• If you experience problems during installation,
consult your Kenwood dealer.
• The capital letters and small letters of the display
can be reversed.
• The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some of the
illustrations on the display may be inapplicable.

Kenwood Receivers available for this unit
Operation methods are classified into groups by
receiver (control unit) type.
First, refer to (page 4) to confirm the
group of the operation you whish to perform.
Model-A, B, C, D, E, F, G
Refer to the relevant pages (). To use a Bluetooth audio player
with this unit, refer to (page 25).
Model-H
Refer to the relevant pages (). To use a Bluetooth audio player with this
unit, refer to (page 25).

Model-I
After performing the operation mentioned
(page 26) or
(page 26), refer to the
Instruction Manual for Control Unit.
To use a Bluetooth audio player with this unit, refer to
(page 25).
Notes on selecting and deleting a Hands-Free
Phone
• If a cell-phone is already selected, deselect it, and then
select a different one.
• "BT300 FW***" and the firmware version are displayed in the
cell-phone selection list. Although the same contents are
displayed in the deletion list, they cannot be deleted.
• The audio player is displayed on the device list after the
registration. However, the audio player on the list cannot be
selected.

Model-J, L
Refer to the Instruction Manual for Control Unit.
Model-K
Refer to the Instruction Manual for Control Unit.
The functions requiring different operation are
described below:
• Displaying song information of Bluetooth audio
source files
The currently playing song information can be
displayed when Bluetooth audio player supports
AVRCP 1.3 profile.
Title & Artist ("Title/Artist"), Album & Artist ("Album/
Artist")
• Displaying timestamp when dialing from call history
list
Name, telephone number, and timestamp can be
selected by switching among display items.
• Registering Bluetooth device
When a Bluetooth device to be connected is
selected from the device list, "Pairing" appears
and this unit automatically starts pairing with the
selected Bluetooth device
- The registration is complete when "Pairing Success"
is displayed. Perform the operation after sending a
PIN code.
- Enter a PIN code when "PIN Code NG" is displayed.
• Bluetooth Settings
Display
Overview
"MIC Gain"
"–3" – "0" – "+3": Adjust the sensitivity of the
microphone for a telephone call. Adjust the voice
of caller.
"NR Level"
"–3" – "0" – "+3": Reduce the noises generated
by surrounding environment without changing the
microphone volume. Adjust the voice of caller when
it is not clear.
"Echo Cancel"
"–2" – "0" – "+2": Adjust the level of echo
cancellation.
English |

B64-4713-00_10_KCA-BT300_KE.indb 3

10/03/12 14:51

Model List
The receiver units that can be used
with KCA-BT300 are as follows: (As
of April 2010)
For details on the compatible
receivers to be released in the
future, access the following URL:
http://www.kenwood.com/cs/
ce/bt/

Model name

Group

DDX5022
DDX5022Y
DDX5024
DDX5026
DDX5032
DDX5032M
DDX5034
DDX5034M
DDX5036
DDX5036M
DDX5054
DDX5056
DDX512
DDX514
DDX516
DDX52RY
DDX54R
DDX6019
DDX6029
DDX6029Y
DDX6034
DDX6034M
DDX6036
DDX6036
DDX6036M
DDX6039
DDX6054
DDX630BT
DDX7019
DDX7029
DDX7029Y
DDX7032
DDX7032M
DDX7039
DDX7039M
DDX712
DDX8019
DDX8029
DDX8029Y
DDX8039
DNX210EX
DNX5120
DNX512EX

4 |

J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
H
H
H
J
J
J
J
J
H
J
J
I
I
I
J
J
I
I
J
I
I
I
I
G-1
J
J

Type switch
setting
1 2 3
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF OFF ON
OFF OFF ON
OFF OFF ON
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF OFF ON
OFF ON OFF
OFF ON OFF
OFF OFF ON
OFF OFF ON
OFF OFF ON
OFF ON OFF
OFF ON OFF
OFF OFF ON
OFF OFF ON
OFF ON OFF
OFF OFF ON
OFF OFF ON
OFF OFF ON
OFF OFF ON
OFF OFF ON
OFF ON OFF
OFF ON OFF

Model name
DNX5140
DNX5160
DNX5220
DNX5240
DNX5360
DNX5360M
DNX5560
DNX7100
DNX710EX
DNX7120
DNX7200
DNX7220
DNX7320
DNX7320CN
DPX-MP2090U
DPX-MP2100
DPX-MP3110
DPX-MP3110S
DPX-MP4110
DPX-MP4110S
DPX-MP5100U
DPX-MP5110U
DPX-MP6110U
DPX-MP7090U
DPX302
DPX303
DPX313Y
DPX501
DPX501U
DPX501UY
DPX502
DPX502U
DPX502UY
DPX503
DPX503U
DPX503UY
DPX701
DPX701U
DPX701UY
KDC-5047U
KDC-6047U
KDC-HD545U
KDC-HD942U
KDC-MP2035
KDC-MP235
KDC-MP238
KDC-MP242
KDC-MP3035
KDC-MP335
KDC-MP338
KDC-MP342U
KDC-MP4036AX
KDC-MP4036U

Group
J
J
J
J
J
J
J
I
I
J
I
J
J
J
G-1
G-1
F
F
F
F
G-1
F
E-1
G-1
G-1
E-1
E-1
G-1
G-1
G-1
G-1
G-1
G-1
E-1
E-1
E-1
G-1
G-1
G-1
K
K
J
J
G-1
G-1
G-4
A
G-1
G-1
D-1
A
G-1
G-1

Type switch
setting
1 2 3
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF OFF ON
OFF OFF ON
OFF ON OFF
OFF OFF ON
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF OFF ON
ON OFF ON
ON OFF OFF
ON OFF OFF
ON OFF OFF
ON OFF OFF
OFF OFF ON
ON OFF OFF
OFF OFF OFF
OFF OFF ON
ON OFF ON
OFF OFF OFF
OFF OFF OFF
ON OFF ON
ON OFF ON
ON OFF ON
OFF OFF ON
OFF OFF ON
OFF OFF ON
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF ON
OFF OFF ON
OFF OFF ON
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF ON
OFF OFF ON
OFF OFF ON
OFF OFF OFF
OFF OFF ON
OFF OFF ON
ON OFF OFF
OFF OFF OFF
OFF OFF ON
OFF OFF ON

Model name
KDC-MP4039
KDC-MP408U
KDC-MP435U
KDC-MP436U
KDC-MP438U
KDC-MP439
KDC-MP442U
KDC-MP443
KDC-MP445U
KDC-MP5033U
KDC-MP5036U
KDC-MP5039U
KDC-MP5043U
KDC-MP532U
KDC-MP535U
KDC-MP538U
KDC-MP543U
KDC-MP5539U
KDC-MP6036
KDC-MP6039
KDC-MP6043U
KDC-MP632U
KDC-MP635
KDC-MP638U
KDC-MP642U
KDC-MP6539U
KDC-MP7090U
KDC-MP735U
KDC-MP738U
KDC-MP745U
KDC-MP8090U
KDC-MP832U
KDC-MP9090U
KDC-U6046
KDC-U6046L
KDC-W3537
KDC-W3537Y
KDC-W3541
KDC-W3541Y
KDC-W3544W
KDC-W3544WY
KDC-W4037
KDC-W4037Y
KDC-W4041
KDC-W4141Y
KDC-W4537U
KDC-W4537UY
KDC-W4544U
KDC-W4644UY
KDC-W4737U
KDC-W4737UY
KDC-W5041U
KDC-W5137

Group
D-1
D-1
G-1
G-1
D-1
G-4
B
A
K
G-1
G-1
D-1
A
G-1
G-1
E-2
A
D-1
G-1
E-2
B
G-1
G-3
E-1
J
E-2
D-1
G-3
E-1
K
E-1
G-3
E-1
K
K
G-1
G-1
D-2
D-2
A
A
G-1
G-1
D-1
D-1
G-1
G-1
A
A
G-1
G-1
D-1
G-1

Type switch
setting
1 2 3
ON OFF OFF
ON OFF OFF
OFF OFF ON
OFF OFF ON
ON OFF OFF
OFF OFF ON
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
ON OFF ON
OFF OFF ON
ON OFF OFF
OFF OFF OFF
ON OFF ON
OFF OFF ON
OFF OFF OFF
OFF OFF OFF
ON OFF OFF
OFF OFF ON
OFF OFF OFF
OFF OFF OFF
ON OFF ON
OFF OFF ON
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
ON OFF OFF
OFF OFF ON
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF ON
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF ON
OFF OFF ON
ON OFF OFF
ON OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF ON
OFF OFF ON
ON OFF OFF
ON OFF OFF
OFF OFF ON
OFF OFF ON
OFF OFF OFF
OFF OFF OFF
OFF OFF ON
OFF OFF ON
ON OFF OFF
OFF OFF ON

KCA-BT300

B64-4713-00_10_KCA-BT300_KE.indb 4

10/03/12 14:51

Model name
KDC-W5137Y
KDC-W5141UY
KDC-W5534U
KDC-W5534UY
KDC-W5541U
KDC-W5544U
KDC-W5641UY
KDC-W5644UY
KDC-W6041U
KDC-W6141UY
KDC-W6534U
KDC-W6537U
KDC-W6537UY
KDC-W6541U
KDC-W6641UY
KDC-W7037
KDC-W7037Y
KDC-W7041U
KDC-W7044U
KDC-W7141UY
KDC-W7144UY
KDC-W7534U
KDC-W7534UY
KDC-W7537U
KDC-W7537UY
KDC-W7541U
KDC-W7541UY
KDC-W7544U
KDC-W7644UY
KDC-W9537U
KDC-W9537UY
KDC-X491
KDC-X492
KDC-X493
KDC-X494
KDC-X590
KDC-X591
KDC-X592
KDC-X692
KDC-X693
KDC-X7006
KDC-X7006U
KDC-X7009U
KDC-X7013U
KDC-X7013UL
KDC-X7016
KDC-X7016L
KDC-X7533U
KDC-X791
KDC-X792
KDC-X794
KDC-X8006U
KDC-X8009U

Group
G-1
D-1
G-1
G-1
D-1
B
D-1
B
E-2
E-2
G-1
G-1
G-1
E-2
E-2
G-3
G-3
E-1
J
E-1
J
G-3
G-3
G-3
G-3
E-1
E-1
J
J
G-2
G-2
G-1
D-1
B
K
G-1
G-1
E-2
E-1
J
G-3
G-3
E-1
J
J
K
K
G-1
G-3
E-1
K
G-2
E-1

Type switch
setting
1 2 3
OFF OFF ON
ON OFF OFF
ON OFF ON
ON OFF ON
ON OFF OFF
OFF OFF OFF
ON OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
ON OFF ON
OFF OFF ON
OFF OFF ON
OFF OFF OFF
OFF OFF OFF
OFF OFF ON
OFF OFF ON
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF ON
OFF OFF ON
OFF OFF ON
OFF OFF ON
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF ON
OFF OFF ON
OFF OFF ON
ON OFF OFF
OFF OFF OFF
OFF OFF OFF
ON OFF ON
OFF OFF ON
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF ON
OFF OFF ON
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
ON OFF ON
OFF OFF ON
OFF OFF OFF
OFF OFF OFF
OFF OFF ON
OFF OFF OFF

Model name
KDC-X890
KDC-X891
KDC-X9006U
KDC-X9533U
KDC-X991
KDV-412
KDV-415U
KDV-4244
KDV-4544
KDV-5234
KDV-5244U
KDV-5544U
KDV-MP4343
KDV-MP4343G
KDV-MP4443
KDV-MP5042U
KDV-MP5343U
KDV-MP5443U
KDV-MP6333
KDV-MP6433
KIV-700
KMR-330
KMR-440U
KMR-700U*1
KOS-A210
KOS-A300
KOS-V1000
KOS-V500
KVT-50DVDRY
KVT-512
KVT-514
KVT-516
KVT-522DVD
KVT-522DVDY
KVT-524DVD
KVT-526DVD
KVT-532DVD
KVT-532DVDM
KVT-534DVD
KVT-534DVDM
KVT-536DVD
KVT-536DVDM
KVT-546DVD
KVT-54DVDR
KVT-554DVD
KVT-556DVD
KVT-614
KVT-636DVD
KVT-696
KVT-719DVD
KVT-729DVD
KVT-729DVDY
KVT-739DVD

Group
G-3
G-2
G-2
G-3
G-2
G-1
A
A
A
G-1
A
A
A
A
A
A
A
A
G-1
G-1
L
D-1
K
C
J
J
I
I
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
I
I
I
I

Type switch
setting
1 2 3
OFF OFF ON
OFF OFF ON
OFF OFF ON
OFF OFF ON
OFF OFF ON
ON OFF ON
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
ON OFF ON
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
ON OFF ON
ON OFF ON
OFF OFF OFF
ON OFF OFF
OFF OFF OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF OFF ON
OFF OFF ON
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF OFF ON
OFF OFF ON
OFF OFF ON
OFF OFF ON

Model name
KVT-819DVD
KVT-829DVD
KVT-829DVDY
KVT-839DVD

Group
I
I
I
I

Type switch
setting
1 2 3
OFF OFF ON
OFF OFF ON
OFF OFF ON
OFF OFF ON

*1 Except North American sales area

English |

B64-4713-00_10_KCA-BT300_KE.indb 5

10/03/12 14:51

Basic Operation of hands-free phoning (Model-A)
Before Use
• You need to register your cell-phone before using
it with this unit. For more details, see (page 20).
• If you have registered two or more cell-phones,
you need to select one of them. For more details,
see (page 22).
• To use the Phone Book, it must be downloaded to
this unit in advance. For details, see (page 21).
• For the method of operation in the Menu mode,
refer to the Instruction Manual for Control Unit.
• For more information regarding the function with
[
] mark, see (page 30).

Making a call
Dialing Method
1. Select dialing method item during Menu mode
Select the "DIALING MODE"/ "D.MODE" display.
2. Select a dialing method
Press the [AUD] knob.
• "NUMBER DIAL" » "PHONE BOOK1" » "PHONE
BOOK2" » "OUT-CALL" » "IN-CALL" » "MISSED
CALLS"
• "N-DIAL" » "PH-BOOK1" » "PH-BOOK2" » "OUTCALL" » "IN-CALL" » "MIS-CALL"
3 Methods of operations in the above modes are
described below.
3. Exit the dialing method selection mode
Exit Menu mode.
3 Dial a number (
)
2-1. Select the "NUMBER DIAL"/ "N-DIAL" display.
2-2. Enter a phone number
Press the number ([1] – [0]), #([FM]), *([AM]), or
+([¢]) button on the remote controller.
2-3. Make a call
Press the [DIRECT] button on the remote controller.
☞ You can input max 32 digits.

3 Speed dialing (Preset dial)
2-1. Select the "NUMBER DIAL"/ "N-DIAL" display.
2-2. Select the preset dial number
Press the [1] – [6] button.
2-3. Make a call
Press the [AUD] knob for at least 1 second.

☞ You need to register the preset dial number. (page 7)

3 Calling a number in the call log (
)
2-1. Select the "OUT-CALL" (outgoing call), "IN-CALL"
(incoming call), or "MISSED CALLS"/"MIS-CALL"
(missed call) display.

6 |

2-2. Select a name or phone number
Press the [FM] or [AM] button.
2-3. Make a call
Press the [AUD] knob for at least 1 second.
3 Calling a number in the Phone Book (
)
2-1. Select the "PHONE BOOK1"/"PH-BOOK1" display,
proceed to step 2-2.
Select the "PHONE BOOK2"/"PH-BOOK2" display,
proceed to step 2-3.
2-2. Select the initial to be searched for
Operation type
Operation
Move to the next
Press the [4] or [¢] button.
character.
Move to the next row. Press the [FM] or [AM] button.
Determine the
Press the [AUD] knob for at least 1 second.
selected initial.
2-3. Select the name
Operation type
Operation
Move to the next
Press the [FM] or [AM] button.
phone number.
Move to the next
Press the [4] or [¢] button.
name.
2-4. Make a call
Press the [AUD] knob for at least 1 second.
Make a voice dialing call
1. Select voice recognize item during Menu mode
Select the "VOICE RECOG"/ "V-RECOG" display.
2. Press the [AUD] knob for at least 1 second.
"V-RECOG READY"/ "VR READY" is displayed.
3. Press the [AUD] knob.
"PB NAME" is displayed.
When a beep is heard, say the name within 2
seconds.
4. "PB TYPE"/ "PN type" is displayed.
When a beep is heard, say the category within 2
seconds.
5. Make a call
This step is the same as step 3 of the procedure in
. You can
make a call or select a category.

☞ If your voice cannot be recognized, a message is
displayed. Pressing the [AUD] knob allows you to retry
voice input. See page 34.
☞ Both the name and category requires registration of a
voice tag. See page 22.
☞ Audio sound is not output during voice recognition.

Display of phone number type (category)
Display
Description
Display
Description
"GE"/ "GENERAL" General
"OF"/ "OFFICE" Office
"HM"/ "HOME" Home
"OT"/ "OTHER" Other
"MO"/ "MOBILE" Mobile

KCA-BT300

B64-4713-00_10_KCA-BT300_KE.indb 6

10/03/12 14:51

Receiving a call
Answering a Phone Call
Press the [AUD] knob or one of [1] – [6] buttons

☞ Inserting a disc such as a CD will disconnect your call.

Rejecting an Incoming Call
Press the [SRC] button.

Call waiting
Answering Another Incoming Call with the
Current Call Suspended
1. Press the [AUD] knob.
2. Turn the [AUD] knob. Select the "ANSWER" display.
3. Press the [AUD] knob.
Answering another Incoming Call after
Terminating the Current Call
Press the [SRC] button.
Continuing the Current Call
1. Press the [AUD] knob.
2. Turn the [AUD] knob. Select the "REJECT" display.
3. Press the [AUD] knob.
Answering the Waiting Call after Terminating the
Current Call
Press the [SRC] button.
Switching between the Current Call and Waiting
Call
Press the [AUD] knob.

During a call
Disconnecting a Call
Press the [SRC] button.
)
Switching to the Private Mode (
Press the [AUD] knob for at least 1 second.
Switches between Private talk ("PV TALK") or Handsfree talk ("HF TALK") when pressed.
Adjusting the Voice Volume during a Call
Turn the [AUD] knob.

Other functions
Clearing the Disconnection Message
Press the [DISP] button for at least 1 second.

Allow registration of a special device that cannot be
registered normally. See page 21.
Select a cell-phone subject to hands-free connection.
See page 22.
Select the audio player to be connected. See page 22.
Select a dialing method. See page 6.
Download a short message. See page 24.
Display the received short message. See page 24.
Register the voice tag for "voice recognize". See page 22.
Make a voice dialing call. See page 6.
Cancel registration of the Bluetooth device. See page 22.
"HF-CONNECT"/ "AD-CONNECT"/ "BAT"/ "SGNL":
Display the status of the Bluetooth device. See page 30.
Specify the PIN code required when registering this unit
using the Bluetooth device. See page 21.
"OFF"/ "0" – "99": Answer a call automatically after
lapse of the preset time interval for automatic answer.
See page 30.
"FRT"/ "F-R"/ "F-L": Specify the voice output speaker.
See page 30.
"ON"/ "OFF": Output a beep from the speaker when a
call comes in. See page 30.
For how to update the firmware, access our website.
http://www.kenwood.com/cs/ce/bt/

Switching between Display Modes
Press the [DISP] button. You can switch between the
Phone Book and the Call List.

English |

B64-4713-00_10_KCA-BT300_KE.indb 7

10/03/12 14:51

Basic Operation of hands-free phoning (Model-B)
Before Use
• You need to register your cell-phone before using
it with this unit. For more details, see (page 20).
• If you have registered two or more cell-phones,
you need to select one of them. For more details,
see (page 22).
• To use the Phone Book, it must be downloaded to
this unit in advance. For details, see (page 21).
• For the method of operation in the Function control,
refer to the Instruction Manual for Control Unit.
• For more information regarding the function with
[
] mark, see (page 30).

Making a call
Dialing Method
1. Entry dialing method mode
Press the [AUTO]/ [TI] button for at least 1 second.
2. Select a dialing method
Press the [AUD] knob.
"NUMBER DIAL" » "PHONE BOOK1" » "PHONE
BOOK2" » "OUT-CALL" » "IN-CALL" » "MISSED-CALL"
3 Methods of operations in the above modes are
described below.
3. Exit the dialing method selection mode
Press the [AUTO]/ [TI] button for at least 1 second.
3 Dial a number (
)
2-1. Select the "NUMBER DIAL" display.
2-2. Enter a phone number
Press the number ([1] – [0]), #([FM]), *([AM]), or
+([¢]) button on the remote controller.
2-3. Make a call
Press the [DIRECT] button on the remote controller.
☞ You can input max 32 digits.

3 Speed dialing (Preset dial)
2-1. Select the "NUMBER DIAL" display.
2-2. Select the preset dial number
2-2-1. Press the [SEARCH] button.
2-2-2. Select the number to recall by turning the
[AUD] knob.
2-2-3. Press the [AUD] knob.
2-3. Make a call
Press the [AUD] knob for at least 1 second.

☞ You need to register the preset dial number. (page 9)

3 Calling a number in the call log (
)
2-1. Select the "OUT-CALL" (outgoing call), "IN-CALL"
(incoming call), or "MISSED-CALL" (missed call)
display.

8 |

KCA-BT300

B64-4713-00_10_KCA-BT300_KE.indb 8

2-2. Select a name or phone number
Turn the [AUD] knob or push it towards up or
down.
2-3. Make a call
Press the [AUD] knob for at least 1 second.
3 Calling a number in the Phone Book (
)
2-1. Select the "PHONE BOOK1" display, proceed to
step 2-2.
Select the "PHONE BOOK2" display, proceed to
step 2-3.
2-2. Select the initial to be searched for
Operation type
Operation
Move to the next
Turn the [AUD] knob or push it towards right
character.
or left.
Move to the next row. Push the [AUD] knob towards up or down.
Determine the
Press the [AUD] knob for at least 1 second.
selected initial.
2-3. Select the name
Operation type
Operation
Move to the next
Turn the [AUD] knob or push it towards up
phone number.
or down.
Move to the next
Push the [AUD] knob towards right or left.
name.
2-4. Make a call
Press the [AUD] knob for at least 1 second.
Make a voice dialing call
1. Select voice recognize item during Function
control
Select "MENU" > "VOICE RECOG".
"V-RECOG READY" is displayed.
2. Press the [AUD] knob.
"PB NAME" is displayed.
When a beep is heard, say the name within 2
seconds.
3. "PN TYPE" is displayed.
When a beep is heard, say the category within 2
seconds.
4. Make a call
This step is the same as step 3 of the procedure in
. You can
make a call or select a category.

Display of phone number type (category)
Display
Description
Display
Description
"General"
General
"Office"
Office
"Home"
Home
"Other"
Other
"Mobile"
Mobile

10/03/12 14:51

Receiving a call
Answering a Phone Call
Press the [AUD] button.

☞ Inserting a disc such as a CD will disconnect your call.

Rejecting an Incoming Call
Press the [ATT] button for at least 1 second.

Call waiting
Answering Another Incoming Call with the
Current Call Suspended
1. Press the [AUD] button.
2. Turn the [AUD] knob or push it towards up or
down. Select the "ANSWER" display.
3. Press the [AUD] button.
Answering another Incoming Call after
Terminating the Current Call
Press the [SRC] button.
Continuing the Current Call
1. Press the [AUD] button.
2. Turn the [AUD] knob or push it towards up or
down. Select the "REJECT" display.
3. Press the [AUD] button.
Answering the Waiting Call after Terminating the
Current Call
Press the [ATT] button for at least 1 second.
Switching between the Current Call and Waiting
Call
Press the [AUD] button.

During a call
Disconnecting a Call
Press the [SRC] button.
)
Switching to the Private Mode (
Press the [38] button.
Switches between Private talk ("PRVT") or Hands-free
talk when pressed.
Adjusting the Voice Volume during a Call
Turn the [AUD] knob.

Registering to the Preset Dial Number List
1. Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dial a number/ Calling a number in the call log/
Calling a number in the Phone Book
2. Select the button you wish to register
2-1. Press the [SEARCH] button.
2-2. Select the number to memory by turning the
[AUD] knob.
2-3. Press the [AUD] knob for at least 1 second.
3. Exit the dialing method selection mode
Press the [SEARCH] button.
Items Set in Function control
* To enter the Menu mode, press the [AUD] knob for
at least 1 second.
Display
Setting overview
"DVC REGIST"* Register a Bluetooth device (pairing). See page 20.
"S-DVC SELECT"* Allow registration of a special device that cannot be
registered normally. See page 21.
"PHONE SEL"*
Select a cell-phone subject to hands-free connection.
See page 22.
"AUD SEL"*
Select the audio player to be connected. See page 22.
"SMS
Download a short message. See page 24.
DOWNLOAD"
"SMS INBOX"
Display the received short message. See page 24.
"VOICE TAG"
Register the voice tag for "voice recognize". See page 22.
"VOICE RECOG" Make a voice dialing call. See page 8.
"DEVICE DEL"*
Cancel registration of the Bluetooth device. See page 22.
"DVC STATUS"* Display the status of the Bluetooth device.
"PIN EDIT"*
Specify the PIN code required when registering this unit
using the Bluetooth device. See page 21.
"AUTO ANS"
"OFF"/ "0s" – "99s": Answer a call automatically after
lapse of the preset time interval for automatic answer.
See page 30.
"MIC GAIN"
"–2" – "0" – "+2": Adjust the sensitivity of the
microphone for a telephone call.
"NR LEVEL"
"–2" – "0" – "+2": Reduce the noises generated by
the surrounding environment without changing the
microphone volume.
"SP SEL"
"Front"/ "F-R"/ "F-L": Specify the voice output speaker.
See page 30.
"CALL BEEP"
"ON"/ "OFF": Output a beep from the speaker when a
call comes in. See page 30.
"BT F/W UPDATE" For how to update the firmware, access our website.
http://www.kenwood.com/cs/ce/bt/

Other functions
Clearing the Disconnection Message
Press the [AUTO]/ [TI] button for at least 1 second.
Switching between Display Modes
Press the [38] button for at least 1 second. You can
switch between the Phone Book and the Call List.

B64-4713-00_10_KCA-BT300_KE.indb 9

English |

10/03/12 14:51

Basic Operation of hands-free phoning (Model-C)
Before Use
• You need to register your cell-phone before using
it with this unit. For more details, see (page 20).
• If you have registered two or more cell-phones,
you need to select one of them. For more details,
see (page 22).
• To use the Phone Book, it must be downloaded to
this unit in advance. For details, see (page 21).
• For the method of operation in the Menu mode,
refer to the Instruction Manual for Control Unit.
• For more information regarding the function with
[
] mark, see (page 30).

Making a call
Dialing Method
1. Entry dialing method mode
Press the [MUTE] button for at least 1 second.
2. Enter dialing method selection mode
Turn the [VOL] knob to select "Dialing Mode", and
then press the [ENTER] button.
3. Select a dialing method
Press the [ENTER] button.
"DIAL" » "INITIAL" » "P-BOOK" » "OUT-CALL" »
"INCALL" » "MIS-CALL"
3 Methods of operations in the above modes are
described below.
4. Exit the dialing method selection mode
Press the [MUTE] button for at least 1 second.
3 Dial a number (
)
2-1. Select the "DIAL" display.
2-2. Enter a phone number
Operation type
Operation
Select the characters
Turn the [VOL] knob.
Determine the characters.
Press the [ ] button.
Delete the characters.
Press the [ ] button.
2-3. Make a call
Press the [ENTER] button on the remote controller.
☞ You can input max 32 digits.

3 Speed dialing (Preset dial)
2-1. Select the "DIAL" display.
2-2. Select the preset dial number
Press the [1] – [6] button.
2-3. Make a call
Press the [ENTER] button for at least 1 second.

☞ You need to register the preset dial number. (page 11)

10 |

3 Calling a number in the call log (
)
2-1. Select the "OUT-CALL" (outgoing call), "INCALL"
(incoming call), or "MIS-CALL" (missed call) display.
2-2. Select a name or phone number
Press the [u] or [d] button.
2-3. Make a call
Press the [38] button for at least 1 second.
3 Calling a number in the Phone Book (
)
2-1. Select the "INITIAL" display, proceed to step 2-2.
Select the "P-BOOK" display, proceed to step 2-3.
2-2. Select the initial to be searched for
Operation type
Operation
Move to the next
Turn the [VOL] knob or press the [ ] or
character.
[ ] button.
Move to the next row. Press the [u] or [d] button.
Determine the
Press the [ENTER] button for at least 1 second.
selected initial.
2-3. Select the name
Operation type
Operation
Move to the next
Turn the [VOL] knob or press the [u] or
phone number.
[d] button.
Move to the next
Press the [ ] or [ ] button.
name.
2-4. Make a call
Press the [ENTER] button for at least 1 second.
Make a voice dialing call
1. Enter Bluetooth menu mode
Press the [MUTE] button for at least 1 second.
2. Enter voice dialing call mode
Turn the [VOL] knob to select "Voice Recognize".
3. Press the [ENTER] button.
"Ready?" is displayed.
4. Press the [ENTER] button.
"PB Name?" is displayed.
When a beep is heard, say the name within 2
seconds.
5. Press the [1] button.
"PN Type?" is displayed.
When a beep is heard, say the category within 2
seconds.
6. Make a call
This step is the same as step 3 of the procedure in
. You can
make a call or select a category.

☞ If your voice cannot be recognized, a message is
displayed. Pressing the [ENTER] button allows you to
retry voice input. See page 34.
☞ Both the name and category requires registration of a
voice tag. See page 22.
☞ Audio sound is not output during voice recognition.

KCA-BT300

B64-4713-00_10_KCA-BT300_KE.indb 10

10/03/12 14:51

Display of phone number type (category)
Display
Description
Display
Description
"GE"/ "GENERAL" General
"OF"/ "OFFICE" Office
"HM"/ "HOME" Home
"OT"/ "OTHER" Other
"MO"/ "MOBILE" Mobile

Receiving a call
Answering a Phone Call
Press the [ENTER] button or one of [1] – [6] buttons.

☞ Inserting a disc such as a CD will disconnect your call.

Rejecting an Incoming Call
Press the [TUN], [iPod], or [AUX] button.

Call waiting
Answering Another Incoming Call with the
Current Call Suspended
1. Press the [ENTER] button.
2. Turn the [VOL] knob. Select the "ANSWER" display.
3. Press the [ENTER] button.
Answering another Incoming Call after
Terminating the Current Call
Press the [TUN], [iPod], or [AUX] button.
Answering the Waiting Call after Terminating the
Current Call
Press the [TUN], [iPod], or [AUX] button.
Switching between the Current Call and Waiting
Call
Press the [ENTER] button.

During a call
Disconnecting a Call
Press the [TUN], [iPod], or [AUX] button.
)
Switching to the Private Mode (
Press the [1] button.
Switches between Private talk ("PV TALK") or Handsfree talk ("HF TALK") when pressed.
Adjusting the Voice Volume during a Call
Turn the [VOL] knob.

Other functions
Clearing the Disconnection Message
Press the [MUTE] button for at least 1 second.
Switching between Display Modes
Press the [DISP] button. You can switch between the
Phone Book and the Call List.
Registering to the Preset Dial Number List
1. Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dial a number/ Calling a number in the call log/
Calling a number in the Phone Book
2. Select the button you wish to register
Press the [1] – [6] button for at least 2 seconds.
3. Exit the dialing method selection mode
Press the [MUTE] button for at least 1 second.
Items Set in Menu mode
* To enter the Menu mode, press the [ENTER] button
for at least 1 second.
Display
Setting overview
"DVC REG"* Register a Bluetooth device (pairing). See page 20.
"SDVC SEL"* Allow registration of a special device that cannot be
registered normally. See page 21.
"PHN-SEL"* Select a cell-phone subject to hands-free connection. See
page 22.
"AUD-SEL"* Select the audio player to be connected. See page 22.
"SMS DL"*
Download a short message. See page 24.
"IN BOX"*
Display the received short message. See page 24.
"VOICE TAG"* Register the voice tag for "voice recognize". See page 22.
"V-RECOG"* Make a voice dialing call. See page 10.
"DVC-DEL"* Cancel registration of the Bluetooth device. See page 22.
"D-STATUS" "HF-CON"/ "AD-CON"/ "BAT"/ "SGNL": Display the status of
the Bluetooth device. See page 30.
"PIN EDIT"* Specify the PIN code required when registering this unit
using the Bluetooth device. See page 21.
"ANS"
"OFF"/ "0" – "99": Answer a call automatically after lapse
of the preset time interval for automatic answer. See page 30.
"SPK"
"FRT"/ "F-R"/ "F-L": Specify the voice output speaker. See
page 30.
"C-BP"
"ON"/ "OFF": Output a beep from the speaker when a call
comes in. See page 30.
"BT F/W
For how to update the firmware, access our website. http://
Update"
www.kenwood.com/cs/ce/bt/

English |

B64-4713-00_10_KCA-BT300_KE.indb 11

10/03/12 14:51

Basic Operation of hands-free phoning (Model-D)
Before Use
• You need to register your cell-phone before using
it with this unit. For more details, see (page 20).
• If you have registered two or more cell-phones,
you need to select one of them. For more details,
see (page 22).
• To use the Phone Book, it must be downloaded to
this unit in advance. For details, see (page 21).
• For the method of operation in the Menu mode,
refer to the Instruction Manual for Control Unit.
• For more information regarding the function with
[
] mark, see (page 30).

Making a call
Dialing Method
1. Select dialing method item during Menu mode
Select the "DIALING MODE"/ "D.MODE" display.
2. Select a dialing method
Press the [38] button.
• "NUMBER DIAL" » "PHONE BOOK1" » "PHONE
BOOK2" » "OUT-CALL" » "IN-CALL" » "MISSED
CALLS"
• "N-DIAL" » "PH-BOOK1" » "PH-BOOK2" » "OUTCALL" » "IN-CALL" » "MIS-CALL"
3 Methods of operations in the above modes are
described below.
3. Exit the dialing method selection mode
Exit Menu mode.
3 Dial a number (
)
2-1. Select the "NUMBER DIAL"/ "N-DIAL" display.
2-2. Enter a phone number
Press the number ([1] – [0]), #([FM]), *([AM]), or
+([¢]) button on the remote controller.
2-3. Make a call
Press the [DIRECT] button on the remote controller.
☞ You can input max 32 digits.

3 Speed dialing (Preset dial)
2-1. Select the "NUMBER DIAL"/ "N-DIAL" display.
2-2. Select the preset dial number
Press the [1] – [6] button.
2-3. Make a call
Press the [38] button for at least 1 second.

☞ You need to register the preset dial number. (page 13)

3 Calling a number in the call log (
)
2-1. Select the "OUT-CALL" (outgoing call), "IN-CALL"
(incoming call), or "MISSED CALLS"/"MIS-CALL"
(missed call) display.

12 |

2-2. Select a name or phone number
Push the Control knob towards up or down.
2-3. Make a call
Press the [38] button for at least 1 second.
3 Calling a number in the Phone Book (
)
2-1. Select the "PHONE BOOK1"/"PH-BOOK1" display,
proceed to step 2-2.
Select the "PHONE BOOK2"/"PH-BOOK2" display,
proceed to step 2-3.
2-2. Select the initial to be searched for
Operation type
Operation
Move to the next
Push the Control knob towards right or left.
character.
Move to the next row. Push the Control knob towards up or down.
Determine the
Press the [38] button for at least 1 second.
selected initial.
2-3. Select the name
Operation type
Operation
Move to the next
Push the Control knob towards up or down.
phone number.
Move to the next
Push the Control knob towards right or left.
name.
2-4. Make a call
Press the [38] button for at least 1 second.
Make a voice dialing call
1. Select voice recognize item during Menu mode
Select the "VOICE RECOG"/ "V-RECOG" display.
2. Press the [38] button for at least 1 second.
"V-RECOG READY"/ "VR READY" is displayed.
3. Press the [38] button.
"PB NAME" is displayed.
When a beep is heard, say the name within 2
seconds.
4. "PB TYPE"/ "PN type" is displayed.
When a beep is heard, say the category within 2
seconds.
5. Make a call
This step is the same as step 3 of the procedure in
. You can
make a call or select a category.

☞ If your voice cannot be recognized, a message is
displayed. Pressing the [38] button allows you to retry
voice input. See page 34.
☞ Both the name and category requires registration of a
voice tag. See page 22.
☞ Audio sound is not output during voice recognition.

Display of phone number type (category)
Display
Description
Display
Description
"GE"/ "GENERAL" General
"OF"/ "OFFICE" Office
"HM"/ "HOME" Home
"OT"/ "OTHER" Other
"MO"/ "MOBILE" Mobile

KCA-BT300

B64-4713-00_10_KCA-BT300_KE.indb 12

10/03/12 14:51

Receiving a call

Other functions

Answering a Phone Call
Model-D-1: Press the Control knob or one of [1] – [6]
buttons
Model-D-2: Press the [VOL] button or one of [1] – [6]
buttons

Clearing the Disconnection Message
Press the [AUTO]/ [TI] button for at least 1 second.

Rejecting an Incoming Call
Press the [SRC] button.

☞ Inserting a disc such as a CD will disconnect your call.

Call waiting
Answering Another Incoming Call with the
Current Call Suspended
1. Model D-1: Press the Control knob.
Model D-2: Press the [VOL] knob.
2. Push the Control knob towards up or down. Select
the "ANSWER" display.
3. Model D-1: Press the Control knob.
Model D-2: Press the [VOL] knob.
Answering another Incoming Call after
Terminating the Current Call
Press the [SRC] button.
Continuing the Current Call
1. Model D-1: Press the Control knob.
Model D-2: Press the [VOL] knob.
2. Push the Control knob towards up or down. Select
the "REJECT" display.
3. Model D-1: Press the Control knob.
Model D-2: Press the [VOL] knob.
Answering the Waiting Call after Terminating the
Current Call
Press the [AUTO]/ [TI] button for at least 1 second.
Switching between the Current Call and Waiting
Call
Model D-1: Press the Control knob.
Model D-2: Press the [VOL] knob.

During a call
Disconnecting a Call
Press the [SRC] button.
)
Switching to the Private Mode (
Press the [38] button.
Switches between Private talk ("PV TALK") or Handsfree talk ("HF TALK") when pressed.
Adjusting the Voice Volume during a Call
Model D-1: Turn the Control knob.
Model D-2: Turn the [VOL] knob.

Switching between Display Modes
Press the [AUTO]/ [TI] button. You can switch
between the Phone Book and the Call List.

Items Set in Menu mode
* To enter the Menu mode, press the Control knob for
at least 1 second.
Display
Setting overview
"DVC REGIST"*/
Register a Bluetooth device (pairing). See page 20.
"DVC REG"*
"S-DVC SELECT"*/
"SDVC SEL"*
"PHONE SEL"*/
"PHN-SEL"*
"DIALING MODE"*/
"D.MODE"*
"AUDIO SEL"*/
"AUD-SEL"*
"SMS DOWNLOAD"*/
"SMS DL"*
"SMS INBOX"*/
"INBOX"*
"VOICE TAG"*/
"VOICETAG"*
"VOICE RECOG"*/
"V-RECOG"*
"DEVICE DEL"*/
"DVC-DEL"*
"DVC-STATUS"/
"D-STATUS"
"PIN EDIT"*

Allow registration of a special device that cannot be
registered normally. See page 21.
Select a cell-phone subject to hands-free connection.
See page 22.
Select a dialing method. See page 12.
Select the audio player to be connected. See page 22.
Download a short message. See page 24.
Display the received short message. See page 24.
Register the voice tag for "voice recognize". See page 22.
Make a voice dialing call. See page 12.
Cancel registration of the Bluetooth device. See page 22.

"HF-CONNECT"/ "AD-CONNECT"/ "BAT"/ "SGNL":
Display the status of the Bluetooth device. See page 30.
Specify the PIN code required when registering this unit
using the Bluetooth device. See page 21.
"AUTO ANS"/
"OFF"/ "0" – "99": Answer a call automatically after
"ANS"
lapse of the preset time interval for automatic answer.
See page 30.
"SP SEL"/
"FRT"/ "F-R"/ "F-L": Specify the voice output speaker.
"SPK"
See page 30.
"CALL BEEP"/ "C-BP" "ON"/ "OFF": Output a beep from the speaker when a
call comes in. See page 30.
English |

B64-4713-00_10_KCA-BT300_KE.indb 13

10/03/12 14:51

Basic Operation of hands-free phoning (Model-E)
Before Use
• You need to register your cell-phone before using
it with this unit. For more details, see (page 20).
• If you have registered two or more cell-phones,
you need to select one of them. For more details,
see (page 22).
• To use the Phone Book, it must be downloaded to
this unit in advance. For details, see (page 21).
• For the method of operation in the Function control,
refer to the Instruction Manual for Control Unit.
• For more information regarding the function with
[
] mark, see (page 30).

Making a call
Dialing Method
1. Entry dialing method mode
Press the [ATT] button for at least 1 second.
2. Select a dialing method
Press the Control knob ([38]).
"DIAL" » "INITIAL" » "P-BOOK" » "OUT-CALL" » "INCALL" » "MIS-CALL"
3 Methods of operations in the above modes are
described below.
3. Exit the dialing method selection mode
Press the [ATT] button for at least 1 second.
3 Dial a number (
)
2-1. Select the "DIAL" display.
2-2. Enter a phone number
Press the number ([1] – [0]), #([FM]), *([AM]), or
+([¢]) button on the remote controller.
2-3. Make a call
Press the [DIRECT] button on the remote controller.
☞ You can input max 32 digits.

3 Speed dialing (Preset dial)
2-1. Select the "DIAL" display.
2-2. Select the preset dial number
Model E-1:
Press the [1] – [6] button.
Model E-2:
2-1. Press the [FNC] button.
2-2. Select the number to recall by turning the
Control knob.
2-3. Press the Control knob.
2-3. Make a call
Press the Control knob ([38]) for at least 1 second.
☞ You need to register the preset dial number. (page 15)

14 |

3 Calling a number in the call log (
)
2-1. Select the "OUT-CALL" (outgoing call), "IN-CALL"
(incoming call), or "MIS-CALL" (missed call) display.
2-2. Select a name or phone number
Push the Control knob towards up or down.
2-3. Make a call
Press the Control knob ([38]) for at least 1 second.
3 Calling a number in the Phone Book (
)
2-1. Select the "INITIAL" display, proceed to step 2-2.
Select the "P-BOOK" display, proceed to step 2-3.
2-2. Select the initial to be searched for
Operation type
Operation
Move to the next
Push the Control knob towards right or left.
character.
Move to the next row. Push the Control knob towards up or down.
Determine the
Press the Control knob ([38]).
selected initial.
2-3. Select the name
Operation type
Operation
Move to the next
Push the Control knob towards up or down.
phone number.
Move to the next
Push the Control knob towards right or left.
name.
2-4. Make a call
Press the Control knob ([38]) for at least 1 second.
Make a voice dialing call
1. Select voice recognize item during Function
control
Select "BT" > "V-REC".
2. Press the Control knob ([38]).
"PB Name?" is displayed.
When a beep is heard, say the name within 2
seconds.
3. "PN Type?" is displayed.
When a beep is heard, say the category within 2
seconds.
4. Make a call
This step is the same as step 3 of the procedure in
. You can
make a call or select a category.

Display of phone number type (category)
Display
Description
Display
Description
General
Office
"General"/
"Office"/
Home
Other
"Home"/
"Other"/
Mobile
"Mobile"/

KCA-BT300

B64-4713-00_10_KCA-BT300_KE.indb 14

10/03/12 14:51

Receiving a call
Answering a Phone Call
Press the [AUD] button or one of [1] – [6] buttons.

☞ Inserting a disc such as a CD will disconnect your call.

Rejecting an Incoming Call
Press the [ATT] button for at least 1 second.

Call waiting
Answering Another Incoming Call with the
Current Call Suspended
1. Press the [AUD] button.
2. Push the Control knob towards up or down. Select
the "ANSWER" display.
3. Press the [AUD] button.
Answering another Incoming Call after
Terminating the Current Call
Press the [SRC] button.
Continuing the Current Call
1. Press the [AUD] button.
2. Push the Control knob towards up or down. Select
the "REJECT" display.
3. Press the [AUD] button.
Answering the Waiting Call after Terminating the
Current Call
Press the [ATT] button for at least 1 second.
Switching between the Current Call and Waiting
Call
Press the [AUD] button.

During a call
Disconnecting a Call
Press the [SRC] button.
)
Switching to the Private Mode (
Press the Control knob ([38]).
Switches between Private talk ("PRVT") or Hands-free
talk when pressed.
Adjusting the Voice Volume during a Call
Turn the [AUD] knob.

Other functions
Clearing the Disconnection Message
Press the [ATT] button for at least 1 second.
Switching between Display Modes
Press the [AUTO]/ [TI] button. You can switch
between the Phone Book and the Call List.

B64-4713-00_10_KCA-BT300_KE.indb 15

Registering to the Preset Dial Number List
1. Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dial a number/ Calling a number in the call log/
Calling a number in the Phone Book
2. Select the button you wish to register
Model E-1:
Press the [1] – [6] button for at least 2 seconds.
Model E-2:
2-1. Press the [FNC] button.
2-2. Select the number to memory by turning the
Control knob.
2-3. Press the Control knob for at least 1 second.
3. Exit the dialing method selection mode
Press the [ATT] button for at least 1 second.
Items Set in Function control
* To enter the Menu mode, press the Control knob for
at least 1 second.
Item
Setting overview
MENU "Device
Register a Bluetooth device (pairing). See page 20.
Regist"*
"SPCL DVC
Allow registration of a special device that cannot be
Select"*
registered normally. See page 21.
"Phone
Select a cell-phone subject to hands-free
Selection"* connection. See page 22.
"Audio
Select the audio player to be connected. See page 22.
Selection"*
"Device
Cancel registration of the Bluetooth device. See
Delete"*
page 22.
"BT DVC
Display the status of the Bluetooth device.
Status"*
"PIN Code
Specify the PIN code required when registering this
Edit"*
unit using the Bluetooth device. See page 21.
"Auto Answer" "OFF"/ "0s" – "99s": Answer a call automatically
after lapse of the preset time interval for automatic
answer. See page 30.
"SP Select" "Front"/ "F-R"/ "F-L": Specify the voice output
speaker. See page 30.
"Call Beep" "ON"/ "OFF": Output a beep from the speaker when
a call comes in. See page 30.
"BT F/W
For how to update the firmware, access our website.
Update"
http://www.kenwood.com/cs/ce/bt/
BT > V-REC
Make a voice dialing call
BT > VOICE > NAME Register a name tag for voice recognition. See
page 22.
BT > VOICE > TYPE Register a type (category) voice tag for voice
recognition. See page 22.
BT > SMS > SMSDL Download a short message. See page 24.
BT > SMS > INBOX Display the received short message. See page 24.

English |

10/03/12 14:51

Basic Operation of hands-free phoning (Model-F)
Before Use
• You need to register your cell-phone before using
it with this unit. For more details, see (page 20).
• If you have registered two or more cell-phones,
you need to select one of them. For more details,
see (page 22).
• To use the Phone Book, it must be downloaded to
this unit in advance. For details, see (page 21).
• For the method of operation in the Menu mode,
refer to the Instruction Manual for Control Unit.
• For more information regarding the function with
[
] mark, see (page 30).

Making a call
Dialing Method
1. Entry dialing method mode
Press the [ATT] button for at least 1 second.
2. Select a dialing method
Press the [38] button.
"N-Dial" » "PH-Book1" » "PH-Book2" » "Out-Call" »
"In-Call" » "MIS-Call"
3 Methods of operations in the above modes are
described below.
3. Exit the dialing method selection mode
Press the [ATT] button for at least 1 second.
3 Dial a number (
)
2-1. Select the "N-Dial" display.
2-2. Enter a phone number
Press the number ([1] – [0]), #([FM]), *([AM]), or
+([¢]) button on the remote controller.
2-3. Make a call
Press the [DIRECT] button on the remote controller.
☞ You can input max 32 digits.

3 Speed dialing (Preset dial)
2-1. Select the "N-Dial" display.
2-2. Select the preset dial number
Press the [1] – [6] button.
2-3. Make a call
Press the [38] button for at least 1 second.

☞ You need to register the preset dial number. (page 17)

3 Calling a number in the call log (
)
2-1. Select the "Out-Call" (outgoing call), "In-Call"
(incoming call), or "MIS-Call" (missed call) display.
2-2. Select a name or phone number
Push the Control knob towards up or down.

16 |

2-3. Make a call
Press the [38] button for at least 1 second.
3 Calling a number in the Phone Book (
)
2-1. Select the "PH-Book1" display, proceed to step 2-2.
Select the "PH-Book2" display, proceed to step 2-3.
2-2. Select the initial to be searched for
Operation type
Operation
Move to the next
Push the Control knob towards right or left.
character.
Move to the next row. Push the Control knob towards up or down.
Determine the
Press the [38] button for at least 1 second.
selected initial.
2-3. Select the name
Operation type
Operation
Move to the next
Push the Control knob towards up or down.
phone number.
Move to the next
Push the Control knob towards right or left.
name.
2-4. Make a call
Press the [38] button for at least 1 second.
Make a voice dialing call
1. Select voice recognize item during Menu mode
Select the "V-RECOG" display.
2. Press the [38] button for at least 1 second.
"VR Ready" is displayed.
3. Press the [38] button.
"PB NAME?" is displayed.
When a beep is heard, say the name within 2
seconds.
4. "PB TYPE?" is displayed.
When a beep is heard, say the category within 2
seconds.
5. Make a call
This step is the same as step 3 of the procedure in
. You can
make a call or select a category.

Display of phone number type (category)
Display
Description
Display
Description
"GE"/ "GENERAL" General
"OF"/ "OFFICE" Office
"HM"/ "HOME" Home
"OT"/ "OTHER" Other
"MO"/ "MOBILE" Mobile

KCA-BT300

B64-4713-00_10_KCA-BT300_KE.indb 16

10/03/12 14:51

Receiving a call

Other functions

Answering a Phone Call
Press the Control knob or one of [1] – [6] buttons.

Clearing the Disconnection Message
Press the [ATT] button for at least 1 second.

Rejecting an Incoming Call
Press the [SRC] button.

Switching between Display Modes
Press the [SE] button. You can switch between the
Phone Book and the Call List.

☞ Inserting a disc such as a CD will disconnect your call.

Call waiting
Answering Another Incoming Call with the
Current Call Suspended
1. Press the Control knob.
2. Push the Control knob towards up or down. Select
the "ANSWER" display.
3. Press the Control knob.
Answering another Incoming Call after
Terminating the Current Call
Press the [SRC] button.
Continuing the Current Call
1. Press the Control knob.
2. Push the Control knob towards up or down. Select
the "REJECT" display.
3. Press the Control knob for at least 1 second.
Answering the Waiting Call after Terminating the
Current Call
Press the [ATT] button for at least 1 second.
Switching between the Current Call and Waiting
Call
Press the Control knob.

Registering to the Preset Dial Number List
1. Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dial a number/ Calling a number in the call log/
Calling a number in the Phone Book
2. Select the button you wish to register
Press the [1] – [6] button for at least 2 seconds.
3. Exit the dialing method selection mode
Press the [ATT] button for at least 1 second.
Items Set in Menu mode
* To enter the Menu mode, press the Control knob for
at least 1 second.
Display
Setting overview
"DVC REG"* Register a Bluetooth device (pairing). See page 20.
"SDVC SEL"* Allow registration of a special device that cannot be
registered normally. See page 21.
"PHN-SEL"* Select a cell-phone subject to hands-free connection. See
page 22.
"AUD-SEL"* Select the audio player to be connected. See page 22.
"SMS DL"*
Download a short message. See page 24.
"IN BOX"*
Display the received short message. See page 24.
"VOICE TAG"* Register the voice tag for "voice recognize". See page 22.
"V-RECOG"* Make a voice dialing call. See page 16.
"DVC-DEL"* Cancel registration of the Bluetooth device. See page 22.
"D-STATUS" "HF-CON"/ "AD-CON"/ "BAT"/ "SGNL": Display the status of
the Bluetooth device. See page 30.
"PIN EDIT"* Specify the PIN code required when registering this unit
using the Bluetooth device. See page 21.
"ANS"
"OFF"/ "0" – "99": Answer a call automatically after lapse
of the preset time interval for automatic answer. See page 30.
"SPK"
"FRT"/ "F-R"/ "F-L": Specify the voice output speaker. See
page 30.
"C-BP"
"ON"/ "OFF": Output a beep from the speaker when a call
comes in. See page 30.

Adjusting the Voice Volume during a Call
Turn the Control knob.

English |

B64-4713-00_10_KCA-BT300_KE.indb 17

10/03/12 14:51

Basic Operation of hands-free phoning (Model-G)
Before Use
• You need to register your cell-phone before using
it with this unit. For more details, see (page 20).
• If you have registered two or more cell-phones,
you need to select one of them. For more details,
see (page 22).
• To use the Phone Book, it must be downloaded to
this unit in advance. For details, see (page 21).
• For the method of operation in the Menu mode,
refer to the Instruction Manual for Control Unit.
• For more information regarding the function with
[
] mark, see (page 30).

Making a call
Dialing Method
1. Entry dialing method mode
Model-G-1, 2, 3:
Press the [ATT] button for at least 1 second.
Model-G-4:
Select "D.MODE" in Menu mode.
2. Select a dialing method
Model-G-1, 4:
Press the Control knob ([38] button).
"N-DIAL" » "PH-BOOK1" » "PH-BOOK2" » "OUT-CALL"
» "IN-CALL"
Model-G-2:
Press the Control knob ([38]).
"DIAL" » "INITIAL" » "PHONE BOOK"/ "PH.BOOK" »
"OUT-CALL" » "IN-CALL"
Model-G-3:
2-1-1. Press the [NEXT] button.
2-1-2. Press the [1] ("DIAL"), [2] ("PHBK"), [3] ("OUTC"), or [4] ("IN-C") button.
Pressing the [2] ("PHBK") button switches
between the Phone Book search methods.
3 Methods of operations in the above modes are
described below.
3. Exit the dialing method selection mode
Model-G-1, 2, 3:
Press the [ATT] button for at least 1 second.
Model-G-4:
Exit Menu mode.
3 Dial a number (
)
2-1. Select the "N-DIAL"/ "DIAL" display.
2-2. Enter a phone number
Press the number ([1] – [0]), #([FM]), *([AM]), or
+([¢]) button on the remote controller.

18 |

2-3. Make a call
Press the [DIRECT] button on the remote controller.
☞ You can input max 32 digits.

3 Speed dialing (Preset dial)
2-1. Select the "N-DIAL"/ "DIAL" display.
2-2. Select the preset dial number
Model-G-1, 4:
Press the [1] – [6] button.
Model-G-2:
2-2-1. Press the [FNC] button.
2-2-2. Select the number to recall by turning the
Control knob.
2-2-3. Press the Control knob.
Model-G-3:
2-2-1. Press the [NEXT] button.
2-2-2. Press the [1] ("1") – [6] ("6") button.
2-3. Make a call
Press the Control knob ([38] button) for at least 1
second.

☞ You need to register the preset dial number. (page 19)

3 Calling a number in the call log (
)
2-1. Select the "OUT-CALL"/"OUT-C" (outgoing call) or
"IN-CALL"/"IN-C" (incoming call) display.
2-2. Select a name or phone number
Push the Control knob towards up or down.
2-3. Make a call
Press the Control knob ([38] button) for at least 1
second.
3 Calling a number in the Phone Book (
)
2-1. Select the "PH-BOOK1"/ "INITIAL" display, proceed
to step 2-2.
Select the "PH-BOOK2"/ "PHONE BOOK"/ "PH.
BOOK" display, proceed to step 2-3.
2-2. Select the initial to be searched for
Operation type
Operation
Move to the next
Push the Control knob towards right or left.
character.
Move to the next row. Push the Control knob towards up or down.
Determine the
Press the Control knob ([38] button) for at
selected initial.
least 1 second.
2-3. Select the name
Operation type
Operation
Move to the next
Push the Control knob towards up or down.
phone number.
Move to the next
Push the Control knob towards right or left.
name.
2-4. Make a call
Press the Control knob ([38] button) for at least 1
second.

KCA-BT300

B64-4713-00_10_KCA-BT300_KE.indb 18

10/03/12 14:51

Receiving a call
Answering a Phone Call
Model-G-1, 2, 3:
Press the [AUDIO] button or one of [1] – [6] buttons.
Model-G-4:
Press the [VOL] button or one of [1] – [6] buttons.

☞ Inserting a disc such as a CD will disconnect your call.

Rejecting an Incoming Call
Model-G-1, 2, 3:
Press the [ATT] button for at least 1 second.
Model-G-4:
Press the [SRC] button.

During a call
Disconnecting a Call
Press the [SRC] button.
)
Switching to the Private Mode (
Press the Control knob ([38] button).
Switches between Private talk ("PV TALK"/ "PRIVATE")
or Hands-free talk ("HF TALK"/ — ) when pressed.
Adjusting the Voice Volume during a Call
Turn the [VOL] knob.

Other functions
Clearing the Disconnection Message
Model-G-1, 2, 3:
Press the [ATT] button for at least 1 second.
Model-G-4:
Press the [AUTO]/ [TI] button for at least 1 second.
Switching between Display Modes
You can switch between the Phone Book and the Call
List.
Model-G-1, 2, 4:
Press the [DISP]/ [AUTO]/ [TI] button. (If the [DISP]
button is not provided, press the [AUTO] or [TI]
button.)
Model-G-3:
Press the [AUTO]/ [TI] button.

Registering to the Preset Dial Number List
1. Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dial a number/ Calling a number in the call log/
Calling a number in the Phone Book
2. Select the button you wish to register
Model-G-1, 4:
Press the [1] – [6] button for at least 2 seconds.
Model-G-2:
2-1. Press the [FNC] button.
2-2. Select the number to memory by turning the
Control knob.
2-3. Press the Control knob.
Model-G-3:
2-1. Press the [NEXT] button.
2-2. Press the [1] ("1") – [6] ("6") button for at least 2
seconds.
3. Exit the dialing method selection mode
Model-G-1, 2, 3:
Press the [ATT] button for at least 1 second.
Model-G-4:
Press the [MENU] button.
Items Set in Menu mode
* To enter the Menu mode, press the Control knob for
at least 1 second.
*1 To enter the Menu mode, push the Control knob
towards right or left.
Display
Setting overview
"PHN-SEL"*/
Select a cell-phone subject to hands-free connection.
"Phone Selection"* See page 22.
"PHN-DEL"*/
Cancel registration of the Bluetooth device. See page 22.
"Phone Delete"*
"D.MODE"*
Model-G-4: Select a dialing method. See page 18.
"BT-CON"/ "BAT"/ "SGNL": Display the status of the
"P-STATUS"*/
"Phone Status"*1 Bluetooth device. See page 30.
"ANS"/
"OFF"/ "0" – "99": Answer a call automatically after
"Auto Answer"
lapse of the preset time interval for automatic answer.
See page 30.
"SPK"/
"FRT"("Front")/ "F-R"/ "F-L": Specify the voice output
"SP Select"
speaker. See page 30.
"C-BP"/
"ON"/ "OFF": Output a beep from the speaker when a
"Call Beep"
call comes in. See page 30.

English |

B64-4713-00_10_KCA-BT300_KE.indb 19

10/03/12 14:51

Function Operation
Operation buttons

2 Press the decision button for at least 1 second.

Operation buttons are grouped and described in
common.
Operation buttons in each group are described as
follows
Group
A
B
C
D
E
F
G

Decision
button
[AUD]
[AUD]
[ENTER]
[38]
[38]
Control knob
[38]

Up
[FM]
[u]

Selection button
Down
Left
[AM]
[4]
[AUD] knob
[d]
[ ]
Control knob
Control knob
Control knob
Control knob

Right
[¢]
[ ]

Search for the Bluetooth device.
When search is completed, "Finished" is displayed.

3 Select the Bluetooth Device
Operation type
Selects the Bluetooth
device
Determine the selection

Operation
Push the selection button towards up
or down.
Press the decision button

4 "PAIRING" is displayed
If "Pairing Success"/"PAIRING OK"/"PAIR OK" is
displayed, proceed to step 7.
If "PIN Code NG"/"PAIR NG" is displayed, press the
decision button. Then enter the PIN code (steps 5
and 6).

5 Input the PIN code
Operation type
Select the numbers.

Registering Bluetooth device
To make your Bluetooth device (cell-phone or audio
player) usable with this unit, you need to register
it (pairing). You can register up to five Bluetooth
devices to this unit.

When registering from Bluetooth devices

1 Turn on the control unit.
2 Start registering a unit by operating the
Bluetooth device.
By operating the Bluetooth device, register the
hands-free unit or audio player (pairing). Select
"KCA-BT300" from the list of connected units.

3 Enter a PIN code
Model-A, B, C, D, E, F:
Input the PIN code registered as mentioned in
(page 21).
PIN code is set to "0000" as the default.
Model-G:
Enter "0000" as a PIN code.
Check that registration is complete on the
Bluetooth device.

4 By operating the Bluetooth device, start handsfree or audio connection.

When registering from this unit (Function of
Model-A, B, C, D, E, F)

1 Select the Bluetooth Device registration mode
Select the "Device Regist"/ "DVS REGIST"/ "DVS
REG"/ "DVC REG" display.

20 |

Move to the next digit.
Delete the last digit.

Operation
Push the selection button towards up
or down.
Push the selection button towards right.
Push the selection button towards left.

6 Transmit the PIN code
Press the decision button for at least 1 second.
If "Pairing Success"/"PAIRING OK"/"PAIR OK" is
displayed, registration is completed.

7 Return to the device list
Model-A, B, D, F:
Press the decision button.
Model-C:
Press the decision button for at least 1 second.
Model-E:
Press the [FNC] button.

8 End device registration
Exit Menu mode.

⁄
• You can also register from the Bluetooth device side. For
the PIN code necessary for registration, see (page 21).
• This unit allows up to eight digits to be input for a PIN
code. If a PIN code cannot be input from this unit, it can
be input from the Bluetooth device.
• If there are 5 or more Bluetooth devices registered, you
cannot register a new Bluetooth device.
• If the error message appears even though the PIN code
is correct, try
(page 21).
• For how to operate the Bluetooth device, refer to the
Instruction Manual that comes with your Bluetooth
device.

KCA-BT300

B64-4713-00_10_KCA-BT300_KE.indb 20

10/03/12 14:51

Function of Model-A, B, C, D, E, F

Registering Special Bluetooth device
Allow registration of a special device that cannot be
registered normally (pairing).

1 Select the special device registration mode
Select the "SPCL DVC Select"/ "S-DVC SELECT"/
"SDVC SEL" display.

2 Press the decision button for at least 1 second.
3 Select a device name
Operation type
Selects the device name
Determine the selection

Operation
Push the selection button towards up
or down.
Press the decision button

If "Completed"/"Complete" is displayed, registration
of the special device is completed.

4 Go through the procedure of (page 20) and complete the
registration (pairing).

⁄
• If the device name is not in the list, select "Other Phone".

Function of Model-A, B, C, D, E, F

Registering PIN Code
By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.

1 Select the PIN code edit mode
Select the "PIN Code Edit"/ "PIN EDIT" display.

2 Press the decision button for at least 1 second.
3 Input the PIN code
Operation type
Select the numbers.
Move to the next digit.
Delete the last digit.

Operation
Push the selection button towards up
or down.
Push the selection button towards right.
Push the selection button towards left.

4 Register a PIN code
Press the decision button for at least 1 second.
If "Completed"/"Complete" is displayed, registration
is completed.

Downloading the Phone Book
Download the phone book data from the cellphone to this unit so that you can use the Phone
Book of this unit.

To download automatically
If the cell-phone supports a phone book
synchronization function, the phone book is
downloaded automatically after Bluetooth
connection.

☞ Setting on the cell-phone may be required.
☞ If no phone book data is found in the unit even after
the compete display, your cell-phone may not support
automatic download of phone book data. In this case,
try downloading manually.

To download from the cell-phone manually

1 By operating the cell-phone, end the hands-free
connection.

2 By operating the cell-phone, send the phone
book data to this unit
By operating the cell-phone, download the phone
book data to this unit.

During downloading:
"Downloading", "DOWNLOAD", or "Now
Downloading…" is displayed.
After completion of downloading:
"Completed" or "COMPLETE" is displayed.

3 By operating the cell-phone, start the handsfree connection.

To clear the downloading completion message:
Press any button.

⁄
• For how to operate the cell-phone, refer to the
Instruction Manual that comes with your cell-phone.
• Up to 1000 phone numbers can be registered for each
registered cell-phone.
• Up to 32 digits can be registered for each phone number
along with up to 50* characters representing a name.
(* 50: Number of alphabetic alphabetical characters.
Fewer characters can be input depending on the type
of characters.)
• To cancel downloading of the phone book data, operate
the cell-phone.

⁄
• By default, "0000" is specified.
• A PIN code can be specified with up to 8 digits.

Next page 3
English | 21

B64-4713-00_10_KCA-BT300_KE.indb 21

10/03/12 14:51

Function Operation
In Standby mode

In Standby mode

Selecting the Bluetooth device You
Wish to Connect

Deleting a Registered Bluetooth
device

When two or more Bluetooth devices have already
been registered, you need to select the Bluetooth
device you wish to use.

You can delete a registered Bluetooth device.

1 Select the Bluetooth device selection mode
during Menu mode

1 Select the Bluetooth device deletion mode
during Menu mode
Select the "Device Delete"/ "DEVICE DEL"/ "Phone
Delete"/ "PHN-DEL" display.

Cell-phone
Select the "Phone Selection"/ "PHONE SEL"/ "PHNSEL" display.

2 Enter the Bluetooth device deletion mode

Audio player (excluding Model-D)
Select the "Audio Selection"/ "AUD-SEL" display.

3 Select the Bluetooth device you wish to delete

2 Enter the selected Bluetooth device selection
mode
Press the decision button for at least 1 second.
'(name)' is displayed.

3 Select the Bluetooth device
Operation type
Selects the Bluetooth
device
Set up the Bluetooth device

Operation
Push the selection button towards up
or down.
Push the selection button towards right
or left.

'✱(name)' or '-(name)' is displayed.
"✱" (dark color) or "✱": The selected cell-phone is
busy.
"✱" (light color) or "_": The selected cell-phone is
on standby.
" " (blank): The cell-phone is deselected.
☞ If a cell-phone is already selected, deselect it, and then
select a different one.

4 Exit the Bluetooth device selection mode
Exit Menu mode.

⁄
• For Model-D, F, and G, the firmware version "BT300 FW
***" is displayed at the end of the Bluetooth device list.
For how to update the firmware, access our website.
http://www.kenwood.com/cs/ce/bt/
• For Model-G, the audio player is displayed on the device
list after the registration. However, the audio player on
the list cannot be selected.

Press the decision button for at least 1 second.
'(name)' is displayed.
Push the selection button towards up or down.

4 Delete the selected Bluetooth device
Model-A, B, D, F, G-1, G-3:
Press the decision button for at least 1 second.
Model-C:
Press the decision button.
Model-E, G-2:
4-1. Press the decision button.
4-2. Push the selection button towards right to
select "YES"/"Y".
4-3. Press the decision button.

5 Exit the Bluetooth device deletion mode
Exit Menu mode.

⁄
• When a registered cell-phone is deleted, its Phone Book,
log, SMS, and voice tag are also deleted.
• For Model-D, F, and G: The firmware version "BT300 FW
***" is displayed and cannot be deleted.

Function of Model-A, B, C, D, E, F

Adding a Voice Dialing Command
Add a voice tag to the phonebook for voice dialing.
You can register up to 35 voice tags.

1 Entry the voice tag mode
Select the "NAME MEM"/ "PB Name Edit"/ "Name
EDT" display.
Model-A, B, C, D, F:
Press the decision button for at least 1 second.
Model-E:
Press the decision button.

2 Search for the name to register
Select the name to register with reference to 2-3 in
.

22 |

KCA-BT300

B64-4713-00_10_KCA-BT300_KE.indb 22

10/03/12 14:51

If a voice tag has already been registered for a
name, "*" is displayed before the name.

3 Select a mode
Model-A, B, C, D-2, F:
Push the selection button towards up or down.
Model-B, C, D-1:
Turn the selection button.
Model-E:
Push the selection button towards right or left.
Display
Operation
"N-REG"/"REGIST"/"Name REG" Register a voice tag.
"N-CHK"/"PLAY"/"Name CHK" * Play a voice tag.
"N-DEL"/"DELETE"/"Name DEL" * Delete a voice tag.
"RETURN"
Return to step 2.
* Displayed only when a name for which a voice tag has
been registered is selected.

Select "N-REG"/"REGIST"/"Name REG"
* Audio sound is not output during voice tag registration.

4 Register a voice tag (first)
Press the decision button.
"Enter Voice 1"/ "ENTER1" is displayed.
When a beep is heard, say a voice tag within 2
seconds.

5 Confirm the voice tag (second)
Press the decision button.
"Enter Voice 2"/ "ENTER2" is displayed.
When a beep is heard, say the same voice tag as
that you said in step 4 within 2 seconds.
"COMPLETE" is displayed.

6 End registration
Press the decision button.
Return to step 2. You can register another voice tag
continuously.

☞ If your voice cannot be recognized, a message is
displayed. Pressing the [38] button allows you to retry
voice input. (page 26)

Select "N-CHK"/"PLAY"/"Name CHK"

4 Press the decision button.
Play the registered voice and return to step 2.

Select "N-DEL"/"DELETE"/"Name DEL"

4 Delete a voice tag
Model-B, D, F:
Press the decision button for at least 1 second.
Model-A, C, E:
4-1. Press the control button.
4-2. Push the selection button towards right to
select "YES"/"Y".
4-3. Press the decision button.

B64-4713-00_10_KCA-BT300_KE.indb 23

Return to step 2.

Exit the voice tag mode
Exit Menu mode.

Function of Model-A, B, C, D, E, F

Setting a Voice Command for
Category
Add a voice tag to the phone number category
(type) for voice calling.

1 Entry the voice tag mode
Model-D:
Press the [38] button for at least 1 second.
Model-F:
Push the Control knob towards up or down.
Select the "TYPE MEM"/ "PN Type Edit"/ "Type EDT"
display.
Model-A, B, D, F:
Press the decision button for at least 1 second.
Model-C, E:
Press the decision button.

2 Select the category (type) you wish to set
Operation type
Selects category
Determine the selection

Operation
Push the selection button towards up
or down.
Press the decision button.

3 Select a mode
Model-A, B, C, D-2, F:
Push the selection button towards up or down.
Model-B, C, D-1:
Turn the selection button.
Model-E:
Push the selection button towards right or left.
Display
Operation
"T-REG"/"REGIST"/"Type REG"
Register a voice tag.
"T-CHK"/"PLAY"/"Type CHK" *
Play a voice tag.
"T-DEL"/"DELETE"/"Type DEL" * Delete a voice tag.
"RETURN"
Return to step 2.
* Displayed only when a category (type) for which a voice
tag has been registered is selected.

4 Register the category (type) by performing
steps 4 to 6 in (page 22).

Exit the voice tag mode
Exit Menu mode.

Next page 3
English | 23

10/03/12 14:51

Function Operation
Function of Model-A, B, C, D, E, F

Function of Model-A, B, C, D, E, F

Downloading the SMS

SMS (Short Message Service)

Download the short message (SMS) arrived at the
cell-phone so that it can be read on the receiver.

The SMS arrived at the cell-phone is displayed on
the receiver.
A newly arrived message is displayed.

1 Select the SMS download item during Menu
mode
Select the "SMS Download"/ "SMS DL" display.

2 Start downloading
Press the decision button for at least 1 second.
"SMS Downloading"/ "DOWNLOAD" is displayed.
When the downloading finishes, "Completed"/
"COMPLETE" is displayed.

3 Exit the SMS download mode
Exit Menu mode.

⁄
• The cell-phone must be able to transmit the SMS using
Bluetooth. Setting on the cell-phone may be required. If
the cell-phone does not support SMS function, the SMS
download item in Menu mode is not displayed.
• When the SMS is downloaded from the cell-phone, the
unopened messages in the cell-phone are opened.

¤
• To prevent car accidents, the driver should not read the
SMS while driving.

When a new message arrives
"SMS Received"/"NEW SMS" is displayed.
The display disappears with any operations.
Displaying the SMS

1 Select the SMS Inbox mode during Menu
mode
Select the "SMS Inbox"/ "INBOX"/ "SMS" display.

2 Entry the SMS Inbox mode
Press the decision button for at least 1 second.
A message list appears.

3 Select a message
Push the selection button towards up or down.
• Select a phone number and reception date display
mode.
Model-B: Press the [38] button.
Model-C: Press the [DISP] button.
Model-D: Press the [AUTO]/ [TI] button.
Model-F: Press the [SE] button for at least 1 second.
• Scroll the messages.
Push the Control knob towards right or left.
Keep pressing the Control knob scrolls the messages.

4 Display the text
Press the decision button.
Pressing this button again allows you to select a
message again.

5 Exit the SMS Inbox mode
Exit Menu mode.

⁄
• The unopened message is displayed at the beginning
of the list. Other messages are displayed in the order of
reception.
• The SMS that has arrived when the cell-phone is not
linked with Bluetooth cannot be displayed. Download
the SMS.

24 |

KCA-BT300

B64-4713-00_10_KCA-BT300_KE.indb 24

10/03/12 14:51

Remote control

Bluetooth Audio

Making a call

Before Use

• Enters the dialing method selection mode :
[ ] button
• Selects a dialing method : [38] button
• Number dial input:
Input a digit: [0] – [9]
Input "+": [¢]
Input "#": [FM]
Input "*": [AM]
Clear the entered phone number: [4]

• You need to register your Bluetooth Audio player
before using it with this unit. For more details, see
(page 20).
• The Model-A, B, C, D, E, F allows you to select the
Bluetooth audio player you wish to connect. Refer
to (page 22).
• For Model-G, H, I operate the Bluetooth Audio player
for connection.
• For the Model-J, K, L, refer to the Instruction Manual
for Control Unit.

☞ You can input max 32 digits.

• Makes a call : [DIRECT] button

Function of Model-A, B, C, D, E, F, G, H, I

Receiving a call

Playing Bluetooth Audio

• Answers the call : [ ] button
• Switches between the private talk mode and
the hands-free talk mode : [38] button

Source select
Model-A, B, C, D, E, F, G:
Press the [SRC] button.
Select the "BT Audio EXT"/ "BT-A EXT"/ "EXT Media"/
" MEDIA" display.
Model-H, I:
To select the source, select "EXT Media" with
reference to the Instruction Manual for Control
Unit.
Pause and play
Press the [38] button.

Call waiting (Function of Model-A, B, C, D, E, F)
• Answering Another Incoming Call with the
Current Call Suspended : [ ] button
• Answering another Incoming Call after
Terminating the Current Call : [SRC] button
• Continuing the Current Call : [1] button

Music Search
Press the [4] or [¢] button.

During a call
• End the call : [SRC] button
• Adjusts the voice volume : [VOL] buttons

⁄
• If your remote controller has a mode selection switch,
set it to "AUD".
] button and/or
• Remote controllers with the [
numeric buttons are available optionally. Purchase a
remote controller with a desired function.

⁄
• All or some of the operations above cannot be performed if
the Bluetooth audio player is not ready for remote contol.
• The information about the music played by the Bluetooth
audio player cannot be displayed. Either Bluetooth audio
player cannot be displayed, or "T- " is displayed.
• Switching between Bluetooth audio sources does not start
or stop playback automatically. Perform the operation for
starting or stopping playback.
• Some audio players cannot be controlled remotely or
reconnected after Bluetooth disconnection. Operate the
main unit of the audio player to connect Bluetooth.
• For Model-H, I: The buttons other than needed for operation
above may be appeared. However they are invalid.

English |

B64-4713-00_10_KCA-BT300_KE.indb 25

10/03/12 14:51

Operation of hands-free phoning (Model-H)
Registering Bluetooth device
To make your Bluetooth device (cell-phone or audio
player) usable with this unit, you need to register
it (pairing). You can register up to five Bluetooth
devices to this unit.

When registering from Bluetooth devices

3 Enter a PIN code
Enter "0000" as a PIN code.
Check that registration is complete on the
Bluetooth device.

During downloading:
"Downloading", "DOWNLOAD", or "Now
Downloading…" is displayed.

3 By operating the cell-phone, start the handsfree connection.

4 By operating the Bluetooth device, start handsfree or audio connection.

⁄
• If there are 5 or more Bluetooth devices registered, you
cannot register a new Bluetooth device.
• For how to operate the Bluetooth device, refer to the
Instruction Manual that comes with your Bluetooth
device.

Hands-Free Control screen
TEL
Or when a call comes in …

Hands-Free Control screen
9

Hands

Downloading the Phone Book
Download the phone book data from the cellphone to this unit so that you can use the Phone
Book of this unit.

To download automatically
If the cell-phone supports a phone book
synchronization function, the phone book is
downloaded automatically after Bluetooth
connection.

To download from the cell-phone manually

10
AUTO

Free
K E N WO O D

1
2

0123456789

Clear

4
5
S e t Up

14
7

Return

Control screen
DV D V I D E O

13:50

16
TEL

REP
Title 1
Chap
KENWOOD

TIME

SCRL
T0:05:20

1 By operating the cell-phone, end the hands-free
connection.

2 By operating the cell-phone, send the phone
book data to this unit
By operating the cell-phone, download the phone
book data to this unit.

26 |

1 Displays the Search for Phone Book screen.
See (page
28).
2 Displays the Out Going Calls screen.
See (page 28).

KCA-BT300

B64-4713-00_10_KCA-BT300_KE.indb 26

10/03/12 14:51

3 Displays the Incoming Calls screen.
See (page 28).
4 Switches between the private and hands-free
modes (only when a call in progress).
5 Displays the Hands-Free Set Up screen.
See (page 29).
6 Enter three phone numbers for quick dialing.
See (page 28).
7 Enters a phone number.
See (page 28).
8 Displays the signal strength.*
The more the number of bar segments, the
stronger the signal.
9 Displays the present Auto Answering status
AUTO
When Auto Answering is on:
When Auto Answering is off:
p Displays the battery drain of the cell-phone.*
The more the number of bar segments, the higher
the battery level.
q Starts the call.
w Ends the call.
Clears the phone number being entered.
e Clears the entered phone number.
r Returns to the previous screen.
t Displays the calling and called phone numbers.
If you have registered a phone number in the
Phone Book, the destination person name is
displayed.
y Displays the status of connection with the cellphone.
White: The cell-phone is connected.
Orange: The cell-phone is not connected, or it is
outside the service range.

⁄
• While your car is moving, some functions are
disabled for safety’s sake. The buttons associated
with the disabled functions become ineffective if
pressed.
• When the Hands-Free Control screen appears, the
name of the connected cell-phone is displayed for 5
seconds.
• Setting the cell-phone in the private mode can
disable the hands-free function.
• * Since the number of steps of the control unit is
different from that of the cell-phone, the statuses
displayed on the control unit may discord from
those displayed on the cell-phone. No status
is displayed if information about it cannot be
obtained.

B64-4713-00_10_KCA-BT300_KE.indb 27

Key Operation
17
18
19

20
25
21
26

22
23

SRC

u [SRC] key
During a call: Ends the call.
i [*] key (When f is set to "AUD")
Number dial input: Inputs "+".
o [FM+] key (When f is set to "AUD")
Number dial input: Inputs "#".
; [AM-] key (When f is set to "AUD")
Number dial input: Inputs "*".
a [4] key (When f is set to "AUD")
Number dial input:
Clears the entered phone number.
s [0] – [9] key (When f is set to "AUD")
Number dial input: Inputs a phone number digit.
d [DIRECT] key (When f is set to "AUD")
Make a call.
f Remote Control Mode selector switch
Switch to "AUD" when dialing.
g [5]/ [∞] key
During a call: Adjusts the voice volume.
h [
] key
Displays the Hands-Free Control screen.
When a call comes in: Answers the call.
j [u]/ [d] key
During a call: Adjusts the voice volume.
k [SRC] key
During a call: Ends the call.

⁄
• The voice volume level adjusted during a call will be
effective for the next and subsequent calls.
• Increasing the volume excessively is more likely
to produce echo. If echo is produced, turn down
the volume as low as possible. Echo increases in
proportion to the volume.
English | 27

10/03/12 14:51

Operation of hands-free phoning (Model-H)
name whose ﬁrst character you have touched.
2 Select the initial character of a person name in
memory
Press the character ([a] etc.) button.

Making a call
Dial a number
1. Enter a phone number
Press the number ([0] – [9]), [+], [#], or [*].
2. Make a call
Press the [ ] button.

Phone Book L i s t
1234567890

☞ To clear your incorrect entry, press [Clear].

Speed dialing (Preset dial)
1. Select the preset dial number
Press the [P1] – [P3] button.
2. Make a call
Press the [ ] button.

Name
Name
Name
Name

☞ You need to register the preset dial number. (page 29)

Calling a number in the call log
1. Enter the call log mode
Press the [ ] (outgoing call) or [
call) button.
Incoming Calls
1

AUTO

] (incoming

AUTO

Kenwood
1234567890
Kenwood
1234567890

Kenwood
1234567890

DISP

Kenwood
1234567890

Return

1 Enters the destination name.
2 Change to record of redial list.
3 Enters the destination data and returns to the
Hands-Free Control screen.
2. Select a name or phone number
Press the [
] button.
3. Confirm the destination
Press the [OK] button.
4. Make a call
Press the [ ] button.
Calling a number in the Phone Book
1. Enter the Phone Book mode
Press the [ ] button.

OK
Return

1 Enters the destination name.
2 Enters the destination data and returns to the
Hands-Free Control screen.
3 Select a destination you wish to call
]
Press the [ Name
button.
4. Confirm the destination
Press the [OK] button.
5. Make a call
Press the [ ] button.

☞ To use the Phone Book, it must have been downloaded
from the cell-phone. For details, see (page 21).

⁄
• Up to 16 characters can be displayed for each name in the
Phone Book.
• Initials including no corresponding name will not be
displayed.
• During search, a non-accent character such as "u" is
searched for instead of an accent character such as "ü".

Receiving a call
Answering a Phone Call
Press the [ ] button.
Rejecting an Incoming Call
Press the [ ] button.

AUTO

Phone Book L i s t

During a call

1
a

Disconnecting a Call
Press the [ ] button.

Return

1 Displays the Phone Book beginning with the

28 |

KCA-BT300

B64-4713-00_10_KCA-BT300_KE.indb 28

10/03/12 14:51

Other functions
Registering to the Preset Dial Number List
1. Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dial a number/ Calling a number in the call log/
Calling a number in the Phone Book
2. Select the button you wish to register
Press the [P1] – [P3] button for at least 2 seconds.

Selecting a Hands-Free Phone
1. Display the Hands-Free Set Up screen
Press the [SetUp] button on Hands-Free Control
screen.
2. Display the Phone Select list
Press the [Select] button on Hands-Free Set Up
screen.
Phone Select
Kenwood 1
Kenwood 2

Setting up the Hands-Free Phone
Press the [SetUp] button on Hands-Free Control
screen.

Kenwood 3
Kenwood 4
Kenwood 5

Hands Free Set Up
Au t o A n s w e r i n g
1
8
P h o n e Vo i c e
2
F-Right
Beep
On
4 S
Se
e ll e
ec
c tt

AUTO

Return

AUTO

3. Select a Hands-Free phone you wish to use
Press the [ Kenwood 1
] button.

1
2

⁄

D
Seelleetcet
Return

1 Sets an automatic response time after call
termination. ( "8")
"Oﬀ ": This function can not use.
"0-99": Sets to calling ring time (second).
2 Sets a ringing tone output position.
( "F-Right")
"F-Left": Outputs the tone from the front lefthand side speaker.
"F-Right": Outputs the tone from the front righthand side speaker.
"Front All": Outputs the tone from the both front
speakers.
3 Set the beep of the incoming call. ( "On")
"On": Beep is heard.
"Oﬀ ": Beep is canceled.
4 Display the Phone Select screen.
5 Display the Phone Delete screen.

• If a cell-phone is already selected, deselect it, and then
select a different one.
• The firmware version "BT300 FW ***" is displayed at the end
of the Bluetooth device list.
For how to update the firmware, access our website.
http://www.kenwood.com/cs/ce/bt/
• The audio player is displayed on the device list after the
registration. However, the audio player on the list cannot be
selected.

Deleting the Hands-Free Phone
1. Display the Hands-Free Set Up screen
Press the [SetUp] button on Hands-Free Control
screen.
2. Display the Phone Delete list
Press the [Delete] button on Hands-Free Set Up
screen.
Phone Delete

AUTO

Kenwood 1
Kenwood 2

⁄

Kenwood 3
Kenwood 4

• Select the speaker which is further from the microphone in
order to prevent howling or echoes.

Kenwood 5

Return

3. Select a Hands-Free phone you wish to delete
Press the [ Kenwood 1
] button.

⁄
• The Phone Book, outgoing call list, and incoming call list are
deleted together with the deleted Hands-Free phone.
• The firmware version "BT300 FW ***" is displayed and
cannot be deleted.

English |

B64-4713-00_10_KCA-BT300_KE.indb 29

10/03/12 14:51

Appendix
About the Cell-Phone
This unit conforms to the following Bluetooth
specifications:
Version
Bluetooth Standard Ver. 2.1 + EDR
Profile
HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phonebook Access Profile)
SYNC (Synchronization Profile)
For the cell-phones verified for compatibility, access
the following URL:
http://www.kenwood.com/cs/ce/bt/

⁄
• The units supporting the Bluetooth function have been
certified for conformity with the Bluetooth Standard
following the procedure prescribed by Bluetooth
SIG. However, it may be impossible for such units to
communicate with your cell-phone depending on its type.

About the Bluetooth Audio player
This unit conforms to the following Bluetooth
specifications:
Version
Bluetooth Standard Ver. 2.1 + EDR
Profile
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)

About Bluetooth Icons
The control unit supporting the icon display function
can display the following statuses:.
• Bluetooth cell-phone connection status
BT : This indicator turns on when a cell-phone is
connected.
• Signal strength of cell-phone
Maximum
Minimum
• Battery level of cell-phone
Full

Nearly dead

⁄
• Icons are not displayed if information cannot be obtained
from the cell-phone.
• Since the number of steps of the control unit is different
from that of the cell-phone, the statuses displayed on the
control unit may discord from those displayed on the cellphone.

Menu Glossary
• "D-STATUS"/ "P-STATUS" (Displaying the
Bluetooth device Status)
You can display the connection status, signal
strength, and battery level.
"HF CONNECT"/ "BT-CON" / "HF-CON":
Bluetooth cell-phone connection status.
"AD CONNECT"/ "AD CON" :
Bluetooth Audio connection status.
"BAT" : Battery level of cell-phone.

30 |

"SGNL" : Signal strength of cell-phone.
• "ANS"/ "Auto Answer" (Setting the Time Interval
for Automatic Answer)
This function automatically answers (responds
to) a call after lapse of the preset time interval for
automatic answer.
"OFF" : Does not answer the phone call
automatically.
"0" : Automatically answers the phone call at once.
"1" – "99" : Automatically answers the phone call
after lapse of 1 – 99 seconds.
☞ If the time set in the cell-phone is shorter than that set
in the unit, the former will be used.

• "SPK"/ "SP Select" (Setting up the Voice Output
Speakers)
You can specify the voice output speakers.
"Front"/ "FRT" : Outputs voice from the front-left
and front-right speakers.
"F-R" : Outputs voice from the front-right speaker.
"F-L" : Outputs voice from the front-left speaker.
☞ Select the speaker which is further from the
microphone in order to prevent howling or echoes.

• "C-BP"/ "Call Beep"/ "Beep" (Setting the Beep of
the Incoming Call)
You can output a beep from the speaker when a
call comes in.
"ON" : Beep is heard.
"OFF" : Beep is canceled.

Function Note
• Dial a number
• Depending on the type of your control unit, "|" (all
segments are lit) is displayed for #.

• Calling a number in the call log
• The outgoing call list and the incoming call list, and the
missed call list are the lists of calls originated from and
received at this unit. They are not the ones stored in the
cell-phone memory.

• Calling a number in the Phone Book
• To use the Phone Book, it must have been downloaded
from the cell-phone. For details, see .
• Up to 19 characters can be displayed for each name in
the Phone Book.
• During search, a non-accent character such as "u" is
searched for instead of an accent character such as "ü".
The non-alphabetical caracters such as Chinese and
Russian are classified as symbol.

• Switching to the Private Mode
• Depending on the type of your cell-phone, switching
to the private talk mode may select the source that was
used before commencing the hands-free connection.
If this happens, the source cannot be switched back to
the hands-free talk mode by operating this unit. Operate

KCA-BT300

B64-4713-00_10_KCA-BT300_KE.indb 30

10/03/12 14:51

your cell-phone to return to the hands-free talk mode.

• Switching between Display Modes
• Depending on the type of your control unit, the
following restrictions are placed.
- Up to 19 characters can be displayed.
- The # letter cannot be displayed, or "|" (all segments
are lit) is displayed for #.
- You cannot switch between display modes.

FCC WARNING
This equipment may generate or use radio frequency energy.
Changes or modifications to this equipment may cause
harmful interference unless the modifications are expressly
approved in the instruction manual. The user could lose
the authority to operate this equipment if an unauthorized
change or modification is made.
NOTE

FCC Notice
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.

Information on Disposal of Old Electrical
and Electronic Equipment and Batteries
(applicable for EU countries that have
adopted separate waste collection systems)
Products and batteries with the symbol
(crossed-out wheeled bin) cannot be
disposed as household waste.
Old electrical and electronic equipment
and batteries should be recycled at a facility
capable of handling these items and their
waste byproducts.
Contact your local authority for details in
locating a recycle facility nearest to you.
Proper recycling and waste disposal will
help conserve resources whilst preventing
detrimental effects on our health and the
environment.
Notice: The sign "Pb" below the symbol for
batteries indicates that this battery
contains lead.

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment may cause harmful
interference to radio communications, if it is not installed and
used in accordance with the instructions. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.

IC (Industry Canada) Notice
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation
of the device.
The term "IC: " before the certification/registration
number only signifies that the Industry Canada
technical specification were met.
• Contains Transmitter Module FCC ID : RKXCK5050NEW
• Contains Transmitter Module IC ID : 5119A-CK5050NEW

English |

B64-4713-00_10_KCA-BT300_KE.indb 31

10/03/12 14:51

Accessories/ Installation Procedure
Setting the Type Switch

Accessories
1

3 m (9.5 ft) ..........1

..........1
4

..........2

..........1

Installation Procedure
1. To prevent a short circuit, remove the key from the
ignition and disconnect the - battery.
2. Set the Type switch.
3. Make the proper input and output wire
connections for each unit.
4. Install the unit in your car.
5. Reconnect the - battery.
6. Press the reset button on the control unit.

OFF

123

1: Display Character Conversion Function

¤
• Insulate unconnected wires with vinyl tape or other similar
material. To prevent a short circuit, do not remove the caps
on the ends of the unconnected wires or the terminals.
• After the unit is installed, check whether the brake lamps,
blinkers, wipers, etc. on the car are working properly.

For Good Reception
To assure good reception, note the following:
• Communicate with the cell-phone within the lineof-sight distance of 10 m (30 ft). The communication
range becomes shorter depending on the
surrounding environment. The communication
range also becomes shorter when there is an
obstacle between this unit and the cell-phone. The
above maximum communication range (10 m) is
not always assured.
• Keep this unit away from other electric components
(AV components) as far as possible. If they are near,
call connection can fail, TV or radio noise can be
generated, or poor reception can occur.
• A broadcast station or walkie-talkie located nearby
can interfere with communication due to too strong
signal.

32 |

Set the Type switch according to the type of the
control unit connected. See the Type switch setting
column of the model list (page 4).
For the models released after April 2010, set the Type
switch as follows.
- For the model connected with the 5L connector
1: OFF, 2: OFF, 3: OFF
- For the model connected with the KAB connector
1: OFF, 2: ON, 3: OFF
- For more details, see the following web site. Set the
Type switch according to the web site when the
above setting is different from that of the web site.
www.kenwood.com/cs/ce/bt/

When the control unit cannot display accent characters
("u", "a", etc.), it converts these characters to upper-case
alphabetic characters.
OFF: Do not covert characters.
ON: Convert characters.

2: Specifying the Connector to Connect
Specify the type of the connector to be connected to the
control unit.
OFF: Use the 5L connector.
ON: Use the KAB connector.

3: Specifying the Control Unit Type
Specify the type of the control unit to connect to.
OFF: Set when no control unit type is specified in Model list,
or the control unit type is not in the model list.
ON: Set when the control unit type is specified in Model list.

KCA-BT300

B64-4713-00_10_KCA-BT300_KE.indb 32

10/03/12 14:51

Connection

Installation
Control Unit
(KAB connector)

Control Unit
(5L connector)

Installation of the Microphone Unit
1 Check the installation position of the microphone
(accessory 1).

2 Remove oil and other dirt from the installation
surface.

3 Install the microphone.
4 Wire the microphone cable up to the hands-free
Accessory 4

box with it secured at several positions using tape
or the like.

(1.5 m, 5ft)
Accessory 1

Type Switch (page 4, 32)

123

Connector for external device

⁄
Accessory 1
(3 m, 9.5 ft)

• Only the terminal which has
the same shape as that of the
connector connected to the
control unit can be used.
• Only one external device can be
connected.

Fix a cable with a commercial
item of tape.

If You Want to Connect KCA-S220A
Connect the Hands-Free Box to the terminal labelled
TO CHANGER 2.

Peel the release coated paper of double-face adhesive tape to
fix on the place shown above.

KCA-BT300

Control Unit (5L)
KCA-S220A
TO HEAD UNIT

TO CHANGER 1

TO CHANGER 2

Adjust the direction of the microphone to the driver.
Disc Changer

¤
• Please keep the total extension of the control cable from
the control unit to the disc changer to 13 m (43 ft) or
less. Control cable lengths in excess of 13 m will cease to
function properly.

⁄
• Install the microphone as far as possible from the cellphone.

English |

B64-4713-00_10_KCA-BT300_KE.indb 33

10/03/12 14:51

Installation

Troubleshooting Guide

Installation of the Bluetooth unit

¤
• Determine the installation position after making sure that
the unit can communicate with the Bluetooth device.
• Please do not install the unit near the dashboard, the rear
tray, or other important components. Doing so could lead
to injury or accident should the unit come off due to a
shock and strike a person or an important component.
Tapping screws should be used for mounting. (Attachment
with velcro strips, although easy, can come off with a
shock.)

Securing to audio board

What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.

The hands-free talk volume is low.
✔ The hands-free talk volume is set at a low level.
☞ The hands-free talk volume can be adjusted
independently. Adjust it during hands-free talk.

No sound is heard from the rear speakers.
✔ You are talking in the hand-free talk mode.
☞ No sound is heard from the rear speakers in the
hands-free talk mode.

No beep is heard at reception of an incoming call.
✔ No beep is heard depending on the type of your
cell-phone.
☞ The is
set ON.

Voice is not recognized.
✔ The vehicle window is open.
☞ If the surrounding noise is large, voice cannot be
recognized properly. Close the vehicle windows
to reduce noise.
✔ Small voice.
☞ If voice is too small, it cannot be recognized
properly. Speak into the microphone a little more
loudly and naturally.
✔ The person uttering the voice tag is not the one who
registered the it.
☞ Only the voice of the person who registered the
voice tag can be recognized.

The Bluetooth audio player cannot be registered
(pairing).
✔ The PIN code is fixed.
☞ When a PIN code is specified in the Instruction
Manual for Bluetooth Audio Player, register it
with reference to to
register the Bluetooth audio player. If no PIN
code is specified in the Instruction Manual, try
“0000”.

The sound from the Bluetooth audio player is
discontinuous.
✔ The distance between this unit and audio player is
too far.
☞ Move the audio player nearer to this unit.
✔ Another Bluetooth device is affecting the Bluetooth
communication.
☞ Turn off another Bluetooth device.
☞ Move another Bluetooth device away from this
unit.

Accessory 2 (Ø4 × 16 mm)
Antenna part

Securing to pile carpet
Antenna part
Accessory 3

⁄
• Do not stick the velcro tape over the serial number.
• If the installation place is stepped, cut the velcro tape into
two pieces and stick them at two positions.

The messages shown below display your
systems condition.
No Number/ NO-NMBER/ Incoming No Number :
• The calling party does not notify a caller ID.
• There is no phone number data.

34 |

KCA-BT300

B64-4713-00_10_KCA-BT300_KE.indb 34

10/03/12 14:51

Specifications
No Data/ NO DATA :
• There is no outgoing call list.
• There is no incoming call list.
No Entry/ NO ENTRY :
The cell-phone has not been registered
(pairing).
HF Disconnect/ HF DISCONCT/ HF D-CON/ Disconnect/
DISCONCT/ Non Connection/ Disconnected :
The unit cannot communicate with the cellphone.
Audio Disconnect/ AUD DISCONCT/ AD D-CON :
The unit cannot communicate with the audio
player.
HF Connect/ HF CONNECT/ Connect/ CONNECT :
The unit can communicate with the cellphone.
HF Error 07/ HF ERR07:
The memory cannot be accessed.
\ Turn off the power and on again. If this
message still appears, press the reset
button on the control unit.
HF Error 68/ HF ERR68:
The unit cannot communicate with the cellphone.
\ Turn off the power and on again. If this
message still appears, press the reset
button on the control unit.
Unknown:

The Bluetooth device cannot be detected.

Device Full/ DVC FULL:
5 Bluetooth device have already been
registered. No more Bluetooth device cannot
be registered.

Bluetooth section
Technology
: Bluetooth 2.1 + EDR Certified
Frequency
: 2.402 – 2.480 GHz
Output Power
: +4dBm (MAX), 0dBm (AVE) Power Class 2
Maximum Communication range
: Line of sight approx.10m (32.1 ft)
Profiles
: HFP (Hands Free Profile)
: HSP (Headset Profile)
: OPP (Object Push Profile)
: PBAP (Phonebook Access Profile)
: SYNC (Synchronization Profile)
: SPP (Serial Port Profile)
: A2DP (Advanced Audio Distribution Profile)
: AVRCP (Audio/Video Remote Control Profile)

General
Operating voltage (10.5 – 16V allowable)
: 14.4 V
Current consumption
: 200 mA
Dimension (W x H x D)
: 95 x 30 x 105 mm
3-3/4 x 1-3/16 x 4-1/8 inch
Weight
: 0.38 kg (0.84 lbs)

Specifications subject to change without notice.

PIN Code NG/ CODE NG:
The PIN code is wrong.
Connect NG/ CONCT NG:
The unit cannot be connected to the device.
Pairing Failed/ PAIRING NG/ PAIR NG:
Pairing error.
Err No Matching/ NO MATCHING/ NO MATCH:
The voice tag is wrong. Voice cannot be
recognized because of an unregistered voice
tag, etc.
Too Soft:

Voice is too small and cannot be recognized.

Too Loud:

Voice is too large to be recognized.

Too Long:

The word or utterance is too long to be
recognized.

The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by Kenwood Corporation is under license. Other
trademarks and trade names are those of their
respective owners.

No Phonebook/ NO PB:
Data is not contained in the phone book.
No Message/ NO SMS:
No short message in In Box.

This symbol mark indicates that
Kenwood manufactured this product
so as to decrease harmful inﬂuence on
the environment.

English |

B64-4713-00_10_KCA-BT300_KE.indb 35

10/03/12 14:51

Table des matières
Avant l’utilisation

Liste des modèles

Fonctionnement de base de la téléphonie
mains libres (Modèle A)
40
Avant utilisation
Effectuer un appel
Recevoir un appel
Appel en attente
Pendant un appel
Autres fonctions

Fonctionnement de base de la téléphonie
mains libres (Modèle B)
42
Avant utilisation
Effectuer un appel
Recevoir un appel
Appel en attente
Pendant un appel
Autres fonctions

Fonctionnement de base de la téléphonie
mains libres (Modèle C)
44
Avant utilisation
Effectuer un appel
Recevoir un appel
Appel en attente
Pendant un appel
Autres fonctions

Fonctionnement de base de la téléphonie
mains libres (Modèle D)
46
Avant utilisation
Effectuer un appel
Recevoir un appel
Appel en attente
Pendant un appel
Autres fonctions

Fonctionnement de base de la téléphonie
mains libres (Modèle E)
48
Avant utilisation
Effectuer un appel
Recevoir un appel
Appel en attente
Pendant un appel
Autres fonctions

Fonctionnement de base de la téléphonie
mains libres (Modèle F)
50
Avant utilisation
Effectuer un appel
Recevoir un appel
Appel en attente
Pendant un appel
Autres fonctions

36 |

Fonctionnement de base de la téléphonie
mains libres (Modèle G)
52
Avant utilisation
Effectuer un appel
Recevoir un appel
Pendant un appel
Autres fonctions

Fonctionnement des fonctions

Boutons de commande
Enregistrer un appareil Bluetooth
Enregistrer un appareil Bluetooth spécial
Enregistrement du code PIN
Téléchargement du répertoire téléphonique
Sélection de l'appareil Bluetooth que vous
souhaitez connecter
Supprimer un appareil Bluetooth enregistré
Ajouter une commande de numérotation vocale
Configurer une commande vocale pour la
catégorie
Téléchargement de SMS
SMS (Service de messagerie - Short Message
Service)

Télécommande

Effectuer un appel
Recevoir un appel
Appel en attente
(Fonctionnement des modèles A, B, C, D, E, F)
Pendant un appel

Audio Bluetooth

Avant utilisation
Lecture d'audio par Bluetooth

Fonctionnement de la téléphonie mains
libres (Modèle H)
60
Enregistrer un appareil Bluetooth
Téléchargement du répertoire téléphonique
Ecran de commande mains libres
Opération des touches
Effectuer un appel
Recevoir un appel
Pendant un appel
Autres fonctions

Appendice

Accessoires/ Procédure d’installation

Connexion

Installation

Guide de dépannage

Caractéristiques techniques

KCA-BT300

B64-4713-00_10_KCA-BT300_KE.indb 36

10/03/12 14:51

Avant l’utilisation
2AVERTISSEMENT
Pour éviter toute blessure et/ou incendie,
veuillez prendre les précautions suivantes:
• Pour éviter les court-circuits, ne jamais mettre ou laisser
d’objets métalliques (comme une pièce de monnaie ou
un outil en métal) à l’intérieur de l’appareil.
• Le montage et le câblage de ce produit nécessite des
compétences et de l'expérience. Pour des raisons de
sécurité, laissez un professionnel effectuer le travail de
montage et de câblage.

2ATTENTION
• N’installez pas l’appareil dans un endroit exposé
directement à la lumière du soleil, à une chaleur
excessive ou à l’humidité. Évitez également les endroits
trop poussiéreux ou exposés aux éclaboussures.

Remarques
• Si vous rencontrez des problèmes pendant l’installation,
consultez votre revendeur Kenwood.
• Les lettres capitales et les lettres minuscules de l'écran
peuvent être inversées.
• Les illustrations de l’affichage et du panneau
apparaissant dans ce manuel sont des exemples
utilisés pour expliquer avec plus de clarté comment
les commandes sont utilisées. Il est donc possible que
les illustrations d’affichage puissent être différentes
de ce qui est réellement affiché sur l’appareil et aussi
que certaines illustrations représentent des choses
impossibles à réaliser en cours de fonctionnement.

Récepteurs Kenwood disponibles pour cet
appareil
Les modes de fonctionnement sont classés par groupes
en fonction du type de récepteur (unité de commande).
Tout d'abord, référez-vous à la
(page 38) afin de vérifier le groupe de l'opération que vous
souhaitez exécuter.

Modèle A, B, C, D, E, F, G
Référez-vous aux pages correspondantes
(). Pour utiliser un lecteur audio Bluetooth avec cet
appareil, référez-vous à la section

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : iwaseki
Create Date                     : 2010:03:12 14:51:30+09:00
Modify Date                     : 2010:03:18 08:03:53+09:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 9.0.0 (Macintosh)
Format                          : application/pdf
Creator                         : iwaseki
Title                           : B64-4713-00_10_KCA-BT300_KE.indb
Creator Tool                    : Adobe InDesign CS4_J (6.0.4)
Metadata Date                   : 2010:03:18 08:03:53+09:00
Document ID                     : uuid:3040a8cc-6ca9-cf43-9d71-ce43058fc87b
Instance ID                     : uuid:ef4d741c-8268-4b17-9dbc-027028aa3fa6
Page Count                      : 104

EXIF Metadata provided by EXIF.tools

Kenwood Kca Bt300 Users Manual B64 4713 00_10_KCA BT300_KE.indb

KCA-BT300 to the manual 0091036b-0c97-43ab-a459-ac57a0d17a0a

Navigation menu

Versions of this User Manual:

Views

Navigation