Kenwood Car Stereo System Kdc 3051G Users Manual 3251RY Radio OWNER'S Operating Instructions User
KDC-315R to the manual 8f6eac77-9bf1-4fa6-b6df-12922a6df129
2015-01-23
: Kenwood Kenwood-Kenwood-Car-Stereo-System-Kdc-3051G-Users-Manual-263116 kenwood-kenwood-car-stereo-system-kdc-3051g-users-manual-263116 kenwood pdf
Open the PDF directly: View PDF 
.
Page Count: 15
| Download | |
| Open PDF In Browser | View PDF |
m .u a co CD-RECEIVER INSTRUCTION MANUAL AMPLI-TUNER LECTEUR DE CD MODE D’EMPLOI РAДИОПРИЕMНИК С KOMПAKT–ДИСKAMИ ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ АВТОМАГНІТОЛА ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ 13 0. KDC-3051R KDC-3051G KDC-3051RY KDC-3051GY KDC-315A KDC-315R KDC-3251RY This symbol mark indicates that Kenwood manufactured this product so as to decrease harmful influence on the environment. Изделие изготовлено в Mалайзии Autogood products Internet store “130”© 2010 Kenwood Corporation All Rights Reserved. CoverRear_KDC-3051R_001A_f.indd 1-2 GET0671-001A (EW/E2W) 7/27/10 3:15:35 PM Safety Safety 2 Preparation 4 How to attach/detach the faceplate How to reset your unit Initial settings before operations Basic operations 5 Getting started 6 Canceling the display demonstration Setting the demonstration mode Adjusting the clock Listening to the radio 6 Adjust [SETTINGS] mode settings 8 13 0. Listening to the other external components 9 Function settings 10 Troubleshooting 11 Installation/connection 12 Basic procedure Warning Caution Wiring connection Installing the unit Specifications 2 EN02-15_KDC-3051R[E]f.indd 2 The illustrations in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the illustrations may differ from what appears on the actual equipment. If you experience problems during installation, consult your Kenwood dealer. When you purchase external components, check with your Kenwood dealer to make sure that they work with your model and in your area. Detailed information and notes about the playable audio files are stated in an online manual on the following site: www.kenwood.com/cs/ce/audiofile/ co Selecting Repeat Play Selecting Random Play Selecting Scan Play Selecting a folder/track/file Important to know... To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Caution: Adjust the volume so that you can hear sounds outside the car. Driving with the volume too high may cause an accident. Condensation: When the car is airconditioned, moisture may collect on the laser lens. This may cause disc read errors. In this case, remove the disc and wait for the moisture to evaporate. This unit can only play the CDs with: m Listening to a disc WARNING Stop the car before operating the unit. .u a CONTENTS 15 Autogood products Internet store “130” 8/2/10 9:17:24 AM ENGLISH The marking of products using lasers Declaration of Conformity with regard to the EMC Directive 2004/108/EC EU Representative’s: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State. For Turkey Bu ürün 26891sayılı Resmi Gazete’de yayımlanan Elektrikli ve Elektronik Eşyalarda Bazı Zararlı Maddelerin Kullanımının Sınırlandırılmasına Dair Yönetmeliğe uygun olarak üretilmiştir. This product complies with Directive, Number 26891 regarding “REGULATION ON THE RESTRICTION OF THE USE OF CERTAIN HAZARDOUS SUBSTANCES IN LECTRICAL AND ELECTRONIC EQUIPMENT”. 13 0. co m Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead. The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit. .u a Manufacturer: Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan Muting upon the reception of a phone call To use this feature, connect the MUTE lead to your telephone using a commercial telephone accessory. (page 13, 14) When a call comes in, “CALL” appears. The audio system pauses. To continue listen to the audio system during a call, press SRC. “CALL” disappear and the audio system resumes. When a call ends, “CALL” disappear. The audio system resumes. Autogood products Internet store “130” EN02-15_KDC-3051R[E]f.indd 3 3 8/2/10 9:17:25 AM Preparation 1 2 1 2 Do not expose the faceplate to direct sunlight, excessive heat, or humidity. Also avoid places with too much dust or the possibility of water splashing. Keep the faceplate in its casing while detached. The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. To prevent deterioration, do not touch the terminals of the unit and faceplate with your fingers. How to reset your unit If this unit fails to operate properly, press the reset button. The unit returns to factory settings when the reset button is pressed. .u a How to attach/detach the faceplate Reset button m Initial settings before operations Press SRC to enter [STANDBY] mode. Press the volume knob to enter [FUNCTION] mode. Turn the volume knob to select [INITIAL SET], then press to enter. Turn the volume knob to make a selection, then press to confirm. See table below for selection. 5 Hold to finish the procedure. 13 0. co 1 2 3 4 Item Selectable setting (Preset: *) PRESET TYPE NORM *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/ LW). ; MIX: Memorizes one station for each preset button regardless of the selected band (FM1/ FM2/ FM3/ MW/ LW). KEY BEEP ON */ OFF: Activates/deactivates the keypress tone. RUSSIAN SET ON: Folder name, file name, song title, artist name, album name are displayed in Russian (if applicable). ; OFF *: Cancels. P-OFF WAIT Sets the duration when the unit will automatically turns off (while in standby mode) to save the battery. –––– : Cancels ; 20M *: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes BUILTIN AUX ON1 *: Outputs sound of the connected external component when “AUX” is selected as the source. ; ON2: Outputs sound from the connected external component when “AUX” is selected as the source. When you turn on the power, the sound attenuates (to prevent noise when no external component is connected). Turn the volume knob clockwise to return to the previous volume level. ; OFF: Disables “AUX” in source selection. CD READ 1 *: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as a music CD. SWITCH PRE REAR */ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on the rear of the unit (through an external amplifier). SP SELECT OFF */ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance. [SWITCH PRE] is selectable only with KDC-3051R/ KDC-3051G/ KDC-315A/ KDC-315R/ KDC-3251RY. 4 EN02-15_KDC-3051R[E]f.indd 4 Autogood products Internet store “130” 8/2/10 9:17:25 AM Loading slot Detaches the faceplate Ejects the disc Display window Auxiliary input jack .u a Volume knob The following indicator lights up when... ST: A stereo broadcast is received (FM). IN: A disc is in the unit. TI: Traffic Information function is turned on. RDS: RDS service is available. When you press or hold the following button(s)... General operation Turns on. Turns off if pressed and held. Selects the available sources (TUNER, CD, AUX, STANDBY), if the power is SRC turned on. • If the source is ready, playback also starts. “CD” is selectable only when a disc is loaded. Adjusts the volume level. Volume knob Selects items. (turn) Confirms selection. Volume knob Enters [FUNCTION] settings. (press) Selects the FM bands (FM1/ FM2/ FM3) or MW/ LW. BAND Selects the next folder. Pauses/resumes playback of a disc. Mutes the sound while listening to a radio or an external component connected to the auxiliary input jack. Searches for a radio station. Selects track/file. 4/¢ Fast-forwards/reverses tracks if pressed and held. Changes the display information. Scrolls the display information if pressed and held. SCRL DISP Enters clock adjustment mode directly (page 6) if pressed and held while in clock display screen. Returns to the previous item. Exit from setting mode if pressed and held. 13 0. co m Button ENGLISH Basic operations Autogood products Internet store “130” EN02-15_KDC-3051R[E]f.indd 5 5 8/2/10 9:17:26 AM Getting started The display demonstration is always turned on unless you cancel it. When you turn on the power (or after you reset the unit), the display shows: [CANCEL DEMO] \ [PRESS] \ [VOLUME KNOB] Setting the demonstration mode 1 Press the volume knob to enter [FUNCTION] mode. 2 Turn the volume knob to select [SETTINGS], then press to enter. 3 Turn the volume knob to select [CLOCK], then press to enter. 4 Turn the volume knob to select [CLOCK ADJ], then press to enter. Clock hour flashes on the display. 5 Turn the volume knob to adjust the hour, then press to enter minute adjustment. Clock minutes flashes on the display. 6 Turn the volume knob to adjust the minute, then press to confirm. Press 4 / ¢ to move between the hour and minute adjustment. 7 Hold to finish the procedure. 13 0. co 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [DEMO MODE], then press to enter. Adjusting the clock m 1 Press the volume knob. [YES] is selected as the initial setup. 2 Press the volume knob again to confirm. [DEMO OFF] appears. If no operation is done for about 15 seconds or if you turn the volume knob to select [NO] in step 2, [DEMO MODE] appears and the display demonstration starts. 3 Turn the volume knob to select [ON] or [OFF]. If [ON] is selected, display demonstration starts if no operation is done for about 20 seconds. 4 Hold to finish the procedure. .u a Canceling the display demonstration Listening to the radio Hold to turn on or off the Traffic Information function (not applicable if “MW/ LW” is selected). Hold for about 2 seconds to memorize the current station or the selected Program Type. (Refer to [PTY SEARCH] on page 7 to select the Program Type.) Press briefly to recall memorized station (or Program Type after entering the PTY search mode). 6 EN02-15_KDC-3051R[E]f.indd 6 Autogood products Internet store “130” 8/2/10 9:17:27 AM ENGLISH 1 Press SRC to select “TUNER.” 2 Press BAND repeatedly to select a band (FM1/ FM2/ FM3/ MW/ LW). 3 Press 4 / ¢ to search for a station. Adjust [SETTINGS] mode settings While listening to the radio... 1 Press the volume knob to enter [FUNCTION] mode. 2 Turn the volume knob to select [SETTINGS], then press to enter. 3 Turn the volume knob to make a selection, then press to confirm. See table below for selection. 4 Hold to finish the procedure. Selectable setting (Preset: *) ON: Searches only FM stations with good reception. ; OFF *: Cancels. Selects the tuning mode for 4 / ¢ buttons. AUTO1 *: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset memory. ; MANUAL: Manually search for a station. AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ; NO *: Cancels (automatic memorizing is not activated). (Selectable only if [NORM] is selected for [PRESET TYPE].) (page 4) MONO SET ON: Improves the FM reception (but the stereo effect may be lost). ; OFF *: Cancels (stereo effect resumes). PTY SEARCH Selects the available Program Type (see table below). Then, press 4 / ¢ to start searching. Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language (ENGLISH */ FRENCH/ GERMAN), then press to confirm. NEWS SET 0M – 90M: Sets the time for receiving the next news bulletin. ; OFF *: Cancels. AF SET ON *: Automatically searches for another station broadcasting the same program in the same RDS network with better reception when the current reception is poor. ; OFF: Cancels. RDS REG ON *: Switches to another station only in the specific region using the “AF” control. ; OFF: Cancels. ATP SEEK ON *: Automatically searches for a station with better reception when the traffic information's reception is poor. ; OFF: Cancels. 13 0. co m .u a Item LOCAL SEEK SEEK MODE [PTY SEARCH] is selectable only when the source is “FM.” [NEWS SET/ AF SET/ RDS REG/ ATP SEEK] is selectable only when the source is “FM.” If other playback source is selected, these settings are selectable under [RDS SET] item. (page 11) Available Program Type: SPEECH MUSIC NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M (music) ROCK M (music) EASY M (music) LIGHT M (music) CLASSICS OTHER M (music) WEATHER FINANCE CHILDREN SOCIAL RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATION M (music) OLDIES FOLK M (music) DOCUMENT The unit will search for the Program type categorized under [SPEECH] or [MUSIC] if selected. [SPEECH] : White character item. ; [MUSIC] : Black character item. The RDS feature won't work where the service is not supported by any broadcasting station. If the volume is adjusted during reception of traffic information, the adjusted volume is memorized automatically. It will be applied the next time Traffic Information function is turned on. Autogood products Internet store “130” EN02-15_KDC-3051R[E]f.indd 7 7 8/2/10 9:17:28 AM Listening to a disc Ejects the disc. (“NO DISC” appears and “IN” indicator goes off.) Press to select track/file. Hold to fast-forwards/reverses. Press to select folder. m .u a 1 Press SRC to turn on the power. 2 Insert a disc into the loading slot. Playback starts automatically. 3 Press to resume/pause playback (if necessary). Selecting Repeat Play Selecting Scan Play Press number button 2 (SCAN) repeatedly to make a selection. co Press number button 4 (REP) repeatedly to make a selection. 13 0. Audio CD : TRAC (track) REPEAT, REPEAT OFF MP3/WMA : FILE REPEAT, FOLD (folder) REPEAT, REPEAT OFF Selecting Random Play Press number button 3 (ALL RDM) repeatedly to make a selection. Audio CD : DISC RANDOM, RANDOM OFF MP3/WMA : FOLD (folder) RANDOM, ALL RANDOM, RANDOM OFF Press and hold number button 3 (ALL RDM) to select “ALL RANDOM” only if “RANDOM OFF” is selected initially. 8 EN02-15_KDC-3051R[E]f.indd 8 Audio CD : TRAC (track) SCAN, SCAN OFF MP3/WMA : FILE SCAN, SCAN OFF If scan play is selected, the unit starts playing the first 10-second intro of the music in the disc or the current folder. If “SCAN OFF” is selected, the unit resumes normal play of the current song. Selecting a folder/track/file 1 Press to enter Music Search mode. “SEARCH” appears, then the current file name appears on the display. 2 Turn the volume knob to select a folder/ track/file, then press to confirm. To return to the root folder (or first track for audio CD), press BAND. To return to the previous folder, press . To cancel the Music Search mode, press and hold . < or > on the display indicates that preceded/next folder is available. Autogood products Internet store “130” 8/2/10 9:17:28 AM ENGLISH Discs that cannot be used Discs that are not round. Discs with coloring on the recording surface or discs that are dirty. You cannot play a Recordable/ReWritable disc that has not been finalized. (For the finalization process refer to your disc writing software, and your disc recorder instruction manual.) 3-inch CD cannot be used. Attempt to insert using an adapter can cause malfunction. Listening to the other external components co m .u a Preparation : Make sure [ON1] or [ON2] is selected for [BUILTIN AUX]. (page 4) Auxiliary input jack 13 0. 3.5 mm stereo mini plug (optional accessory) 1 Press SRC to select “AUX.” 2 Turn on the external component and start playing. 3 Turn the volume knob to adjust the volume. Portable audio device (optional accessory) Maintenance Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to observe this precaution may result in damage to the monitor or unit. Cleaning the connector: Wipe off dirt on the connector of the unit and faceplate. Use a cotton swab or cloth. Handling discs Do not touch the recording surface of the disc. Do not stick tape etc. on the disc, or use a disc with tape stuck on it. Do not use any accessories for the disc. Clean from the center of the disc and move outward. Clean the disc with a dry silicon or soft cloth. Do not use any solvents. When removing discs from this unit, pull them out horizontally. Remove the rims from the center hole and disc edge before inserting a disc. Autogood products Internet store “130” EN02-15_KDC-3051R[E]f.indd 9 9 8/2/10 9:17:30 AM Function settings 1 Press the volume knob to enter [FUNCTION] mode. 2 Turn the volume knob to select [AUDIO CTRL] or [SETTINGS], then press to enter. 3 Turn the volume knob to make a selection, then press to confirm. See table below for selection. Repeat step 3 until the desired item is selected/activated. Press to return to the previous item. 4 Hold to finish the procedure. [AUDIO CTRL] : While listening to any source except in STANDBY state... 13 0. co m .u a Item Selectable setting (Preset: *) SUB-W LEVEL –15 — +15 (Preset: 0): Adjusts the subwoofer output level. BASS BOOST B.BOOST LV1 */ B.BOOST LV2: Selects your preferred bass boost level. ; OFF: Cancels. SYSTEM Q NATURAL */ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ GAME: Selects a preset sound mode suitable to the music genre. (Selects [USER] to use the customized bass, middle, and treble settings.) BASS ADJUST BASS C FRQ: 60/ 80/ 100 */ 200: Selects the center frequency. BASS LEVEL: –8 — +8 (Preset: 0): Adjusts the level. BASS Q FCTR: 1.00 */ 1.25/ 1.50/ 2.00: Adjusts the Q factor. BASS EXTEND: ON: Turns on the extended bass. ; OFF *: Cancels. MID ADJUST MID C FRQ: 0.5K/ 1.0K */ 1.5K/ 2.5K: Selects the center frequency. MID LEVEL: –8 — +8 (Preset: 0): Adjusts the level. MID Q FCTR: 0.75/ 1.00 */ 1.25: Adjusts the Q factor. TRE ADJUST TRE C FRQ: 10.0K/ 12.5K */ 15.0K/ 17.5K: Selects the center frequency. TRE LEVEL: –8 — +8 (Preset: 0): Adjusts the level. BALANCE L15 — R15 (Preset: 0): Adjusts the left and right speaker output balance. FADER R15 — F15 (Preset: 0): Adjusts the rear and front speaker output balance. SUB-W SET ON *: Turns on the subwoofer output. ; OFF: Cancels. DETAIL SET LPF SUB-W: THROUGH *: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/ 160HZ: Frequencies higher than 85 Hz/ 120 Hz/ 160 Hz are cut off. SUB-W PHASE: REV (180°)/ NORM (0°) *: Selects the phase angle of the subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [THROUGH] is selected for [LPF SUB-W].) SUPREME SET: ON *: Creates realistic sound by interpolating the high-frequency components that are lost in MP3/WMA audio compression. ; OFF: Cancels. (Selectable only when playback an MP3/ WMA disc.) VOL OFFSET: –8 — +8 (for AUX) ; –8 — 0 (for other sources): Presets the volume adjustment level of (Preset: 0) each source. The volume level will automatically increase or decrease when you change the source. (Before making an adjustment, select the source you want to adjust.) KDC-3051R/ KDC-3051G/ KDC-315A/ KDC-315R/ KDC-3251RY only: [SUB-W LEVEL/ SUB-W SET/ LPF SUB-W/ SUB-W PHASE] is selectable only if [SWITCH PRE] is set to [SUB-W]. (page 4) [SUB-W LEVEL/ LPF SUB-W/ SUB-W PHASE] is selectable only if [SUB-W SET] is set to [ON]. Select a source before making a source tone memory adjustment, [BASS ADJUST/ MID ADJUST/ TRE ADJUST]. 10 EN02-15_KDC-3051R[E]f.indd 10 Autogood products Internet store “130” 8/2/10 9:17:31 AM Item AUX NAME CLOCK DISPLAY RDS SET Selectable setting (Preset: *) AUX */ DVD/ PORTABLE/ GAME/ VIDEO/ TV: Selects the desired name for the connected component. (Selectable only if “AUX” is selected as the source.) CLOCK ADJ: (For details, see page 6.) TIME SYNC: ON *: Synchronizes the RDS station time data and the unit's clock. ; OFF: Cancels. DIMMER SET: ON: Dims the display illumination. ; OFF *: Cancels. TEXT SCROLL: AUTO/ ONCE: Selects to scroll the display information automatically, or scroll only once. ; OFF *: Cancels. NEWS SET/ AF SET/ RDS REG/ ATP SEEK: Selectable only if any source other than tuner source is selected. (For details, refer page 7.) ENGLISH [SETTINGS] Troubleshooting m .u a Remedy/Cause Adjust the volume to the optimum level. / Check the cords and connections. Check to be sure the terminals of the speaker leads are covered with insulating tape properly, then reset the unit. If “PROTECT” does not disappear, consult your nearest service center. Reset the unit. Turn off the demonstration mode. (page 6) Connect the antenna firmly. / Pull the antenna out all the way. co Symptom Sound cannot be heard. “PROTECT” appears and no operations can be done. The unit does not work at all. [P-OFF WAIT] does not work. Radio reception is poor. / Static noise while listening to the radio. “IN” flashes. 13 0. The CD player is not operating properly. Reinsert the disc properly. If the condition did not improve, turn off the unit and consult your nearest service center. CD-R/CD-RW cannot be played Insert a finalized CD-R/CD-RW (finalize with the component which you used for back and tracks cannot be skipped. recording). Disc sound is sometimes Stop playback while driving on rough roads. / Change the disc. / Check the cords and interrupted. connections. “NA FILE” appears. The unit is playing an unsupported audio file. “NO DISC” appears. Insert a playable disc into the loading slot. “TOC ERROR” appears. The CD is quite dirty. / The CD is upside-down. / The CD is scratched a lot. Try another disc instead. “ERROR 99” appears. The unit is malfunctioning for some reason. Press the reset button on the unit. If the “ERROR 99” code does not disappear, consult your nearest service center. “COPY PRO” appears. A copy-protected file is played. Noise is generated. Skip to another track or change the disc. Tracks cannot play back as you Playback order is determined when files are recorded. have intended them to play. “READING” keeps flashing. Longer readout time is required. Do not use too many hierarchies and folders. Elapsed playing time is not correct. This is caused by how the tracks are recorded. Correct characters are not displayed This unit can only display letters (upper case), numbers, and a limited number of symbols. (e.g. album name). Cyrillic alphabets (upper case) can also be displayed if [RUSSIAN SET] is set to [ON]. (page 4) Autogood products Internet store “130” EN02-15_KDC-3051R[E]f.indd 11 11 8/5/10 9:07:11 AM Installation/connection (×1) (×1) (×1) (×1) (×1) (×2) Basic procedure If your car's ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you connect the ignition wire to a power source with a constant voltage supply, as with battery wires, the battery may die. Do not use your own screws. Use only the screws provided. Install this unit in the console of your vehicle. Make sure the faceplate will not hit the lid of the console (if any) when closing and opening. After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly. Mount the unit so that the mounting angle is 30° or less. If the fuse blows, first make sure the wires aren't touching to cause a short circuit, then replace the old fuse with one with the same rating. Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the · wires or ground them to any metal part in the car. When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rear). Do not touch the metal part of this unit during and shortly after the use of the unit. Metal part such as the heat sink and enclosure become hot. Mounting and wiring this product requires skills and experience. For safety's sake, leave this work to professionals. If you experience problems during installation, consult your Kenwood dealer. co m 1 Remove the key from the ignition switch, then disconnect the · terminal of the car battery. 2 Make proper input and output wire connections. \ “Wiring connection” (page 13, 14) 3 Install the unit to your car. \ “Installing the unit” (page 14) 4 Reconnect the · terminal of the car battery. 5 Reset the unit. (page 4) Caution .u a Part list: A Faceplate.............................................................. B Escutcheon......................................................... C Mounting sleeve ............................................. D Casing for faceplate ...................................... E Wiring harness.................................................. F Removal tool .................................................... Warning 13 0. The unit can only be installed in a car with a 12 V DC power supply, negative ground. If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. Disconnect the battery's negative terminal and make all electrical connections before installing the unit. Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals. Be sure to ground this unit to the car's chassis again after installation. 12 EN02-15_KDC-3051R[E]f.indd 12 Autogood products Internet store “130” 8/2/10 9:17:31 AM ENGLISH Wiring connection For KDC-3051R/ KDC-3051G/ KDC-315A/ KDC-315R/ KDC-3251RY KDC-3051R/ KDC-3051G/ KDC-315A/ KDC-315R KDC-3251RY Front output terminals Rear/subwoofer output terminals Rear/subwoofer output terminals Fuse (10 A) Antenna terminal (JASO) KDC-3051R/ KDC-3051G/ KDC-315A/ KDC-315R: To the steering wheel remote control adapter (optional accessory) Blue/White (Power control/motor antenna control wire) To the power control terminal when using the optional power amplifier, or to the antenna control terminal in the vehicle. m co To the terminal that is grounded when either the telephone rings or during conversation. (To connect the Kenwood navigation system, consult your navigation manual.) 13 0. Brown (Mute control wire) .u a Light blue/yellow (Steering remote control wire) Yellow (Battery wire) Red (Ignition wire) Ignition wire (Red) Red (A7) Vehicle A4 (Yellow) Battery wire (Yellow) ISO connectors Yellow Blue/White Red Black A7 (Red) Unit Yellow (A4) Pin A4 A5 A7 A8 Connecting the ISO connectors on some VW/Audi or Opel (Vauxhall) automobiles You may need to modify the wiring of the supplied wiring harness as illustrated below. Default wiring Color and function Battery Power control Ignition (ACC) Earth (ground) connection Pin B1 / B2 B3 / B4 B5 / B6 B7 / B8 Color and function Rear speaker (right) Purple ª / Purple/black · Gray ª / Gray/black · Front speaker (right) White ª / White/black · Front speaker (left) Green ª / Green/black · Rear speaker (left) Autogood products Internet store “130” EN02-15_KDC-3051R[E]f.indd 13 13 8/2/10 9:17:31 AM For KDC-3051RY/ KDC-3051GY Fuse (10 A) Antenna terminal (JASO) White (+) / White/black (–) : To front speaker (left) Gray (+) / Gray/black (–) : To front speaker (right) Green (+) / Green/black (–) : To rear speaker (left) Purple (+) / Purple/black (–) : To rear speaker (right) To the antenna control terminal in the vehicle. Blue/White (Power control wire) To the power control terminal when using the optional power amplifier. Brown (Mute control wire) To the terminal that is grounded when either the telephone rings or during conversation. (To connect the Kenwood navigation system, consult your navigation manual.) Red (Ignition wire) Car fuse box Ignition key switch Car fuse box 13 0. Yellow (Battery wire) co m .u a Blue (Motor antenna control wire) Black (Ground wire) To the metallic body or chassis of the car Battery Installing the unit 1 2 Connect the wiring harness to the unit. Other wiring connection has been completed earlier. (page 13, 14) Before attaching, make sure the direction of the escutcheon is correct. (Wider hooks on the top side.) 14 EN02-15_KDC-3051R[E]f.indd 14 Dashboard of your car Bend the appropriate tabs to hold the mounting sleeve firmly in place. Autogood products Internet store “130” 8/2/10 9:17:31 AM ENGLISH Removing the unit 1 Detach the faceplate. 2 Engage the catch pin on the removal tools into the holes on both sides of the escutcheon, then pull it out. 3 Insert the removal tools deeply into the slots on each side, then follow the arrows instructions as shown on the right. Specifications Subject to change without notice. FM tuner section Audio section MW tuner section 13 0. .u a co Frequency range (9 kHz space): 531 kHz — 1 611 kHz Usable sensitivity (S/N = 20 dB): 36 μV Maximum output power: 50 W × 4 Output power (DIN 45324, +B = 14.4 V): 30 W × 4 Speaker impedance: 4 Ω — 8 Ω Tone action: Bass: 100 Hz ±8 dB Middle: 1 kHz ±8 dB Treble: 10 kHz ±8 dB For KDC-3051R/ KDC-3051G/ KDC-315A/ KDC-315R/ KDC-3251RY: Preout level / load (CD): 2 000 mV/10 kΩ Preout impedance: ≤ 600 Ω m Frequency range (50 kHz space): 87.5 MHz — 108.0 MHz Usable sensitivity (S/N = 26 dB): 1.0 μV/75 Ω Quieting sensitivity (DIN S/N = 46 dB): 2.5 μV/75 Ω Frequency response (±3 dB): 30 Hz — 15 kHz Signal-to-Noise ratio (MONO): 63 dB Stereo separation (1 kHz): 40 dB LW tuner section Frequency range: 153 kHz — 279 kHz Usable sensitivity (S/N = 20 dB): 57 μV CD player section Laser diode: GaAIAs Digital filter (D/A): 8 Times Over Sampling D/A converter: 24 Bit Spindle speed: 500 rpm — 200 rpm (CLV) Wow & Flutter: Below Measurable Limit Frequency response (±1 dB): 20 Hz — 20 kHz Total harmonic distortion (1 kHz): 0.01 % Signal-to-Noise ratio (1 kHz): 105 dB Dynamic range: 90 dB MP3 decode: Compliant with MPEG-1/2 Audio Layer-3 WMA decode: Compliant with Windows Media Audio Auxiliary input section Frequency response (±3 dB): 20 Hz — 20 kHz Input maximum voltage: 1 200 mV Input impedance: 10 kΩ General Operating voltage (11 V — 16 V allowable): 14.4 V Maximum current consumption: 10 A Installation size (W × H × D): 182 mm × 53 mm × 158 mm Weight: 1.3 kg About Audio file Playable Audio file: MP3 (.mp3), WMA (.wma) Playable disc media: CD-R/RW/ROM Playable disc file format: ISO 9660 Level 1/2, Joliet, Romeo, Long file name. Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device. Autogood products Internet store “130” EN02-15_KDC-3051R[E]f.indd 15 15 8/10/10 3:56:06 PM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Kenwood KDC-3251RY Car Radio OWNER'S MANUAL Operating Instructions User Manual Create Date : 2011:01:25 22:05:16+02:00 Keywords : "Kenwood KDC-3251RY User Manual, Kenwood KDC-3251RY Operating Instructions, Kenwood KDC-3251RY Car Radio , Kenwood KDC-3251RY OWNER'S MANUAL PDF" Modify Date : 2013:07:07 23:04:37+03:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : Kenwood KDC-3251RY Car Radio OWNER'S MANUAL Operating Instructions User Manual Description : Kenwood KDC-3251RY Car Radio OWNER'S MANUAL Operating Instructions User Manual Title : Kenwood KDC-3251RY Car Radio OWNER'S MANUAL Operating Instructions User Manual Subject : Kenwood KDC-3251RY User Manual, Kenwood KDC-3251RY Operating Instructions, Kenwood KDC-3251RY Car Radio , Kenwood KDC-3251RY OWNER'S MANUAL PDF Creator Tool : Internet store http://130.com.ua Metadata Date : 2013:07:07 23:04:37+03:00 Producer : Internet store http://130.com.ua Document ID : uuid:e3611b3f-66ee-4eb3-b178-a2948b86205c Instance ID : uuid:0c041c5b-1c72-402a-9961-7fa0b677e2ec Page Mode : UseThumbs Page Count : 15 Warning : [Minor] Ignored duplicate Info dictionaryEXIF Metadata provided by EXIF.tools