Kenwood Car Stereo System Kdc 3051G Users Manual 3251RY Radio OWNER'S Operating Instructions User

KDC-315R to the manual 8f6eac77-9bf1-4fa6-b6df-12922a6df129

: Kenwood Kenwood-Kenwood-Car-Stereo-System-Kdc-3051G-Users-Manual-263116 kenwood-kenwood-car-stereo-system-kdc-3051g-users-manual-263116 kenwood pdf

Open the PDF directly: View PDF .
Page Count: 15

KDC-3051R

KDC-3051G

KDC-3051RY

KDC-3051GY

KDC-315A

KDC-315R

KDC-3251RY

CD-RECEIVER

INSTRUCTION MANUAL

AMPLI-TUNER LECTEUR DE CD

MODE D’EMPLOI

РAДИОПРИЕMНИК С KOMПAKT–ДИСKAMИ

ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ

АВТОМАГНІТОЛА

ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ

This symbol mark indicates that Kenwood manufactured this product so as to decrease

harmful influence on the environment.

GET0671-001A (EW/E2W)© 2010 Kenwood Corporation All Rights Reserved.

Изделие изготовлено в Mалайзии

CoverRear_KDC-3051R_001A_f.indd 1-2CoverRear_KDC-3051R_001A_f.indd 1-2 7/27/10 3:15:35 PM7/27/10 3:15:35 PM

130.com.ua

Autogood products Internet store “130”

2

CONTENTS

Safety 2

Preparation 4

How to attach/detach the faceplate

How to reset your unit

Initial settings before operations

Basic operations 5

Getting started 6

Canceling the display demonstration

Setting the demonstration mode

Adjusting the clock

Listening to the radio 6

Adjust [SETTINGS] mode settings

Listening to a disc 8

Selecting Repeat Play

Selecting Random Play

Selecting Scan Play

Selecting a folder/track/file

Listening to the other external

components 9

Function settings 10

Troubleshooting 11

Installation/connection 12

Basic procedure

Warning

Caution

Wiring connection

Installing the unit

Specifications 15

Safety

WARNING

Stop the car before operating the unit.

Important to know...

To prevent a short circuit, never put or

leave any metallic objects (such as coins or

metal tools) inside the unit.

Caution: Adjust the volume so that you

can hear sounds outside the car. Driving

with the volume too high may cause an

accident.

Condensation: When the car is air-

conditioned, moisture may collect on the

laser lens. This may cause disc read errors.

In this case, remove the disc and wait for

the moisture to evaporate.

This unit can only play the CDs with:

The illustrations in this manual are

examples used to explain more clearly

how the controls are used. Therefore, what

appears on the illustrations may differ from

what appears on the actual equipment.

If you experience problems during

installation, consult your Kenwood dealer.

When you purchase external components,

check with your Kenwood dealer to make

sure that they work with your model and in

your area.

Detailed information and notes about the

playable audio files are stated in an online

manual on the following site:

www.kenwood.com/cs/ce/audiofile/

EN02-15_KDC-3051R[E]f.indd 2EN02-15_KDC-3051R[E]f.indd 2 8/2/10 9:17:24 AM8/2/10 9:17:24 AM

130.com.ua

Autogood products Internet store “130”

3

ENGLISH

Declaration of Conformity with regard to

the EMC Directive 2004/108/EC

Manufacturer:

Kenwood Corporation

2967-3 Ishikawa-machi, Hachioji-shi, Tokyo,

192-8525 Japan

EU Representative’s:

Kenwood Electronics Europe BV

Amsterdamseweg 37, 1422 AC UITHOORN,

The Netherlands

This Product is not installed by the

manufacturer of a vehicle on the production

line, nor by the professional importer of a

vehicle into an EU Member State.

Information on Disposal of Old Electrical

and Electronic Equipment and Batteries

(applicable for EU countries that have

adopted separate waste collection

systems)

Products and batteries with the

symbol (crossed-out wheeled bin)

cannot be disposed as household

waste.

Old electrical and electronic

equipment and batteries should

be recycled at a facility capable

of handling these items and their

waste byproducts.

Contact your local authority

for details in locating a recycle

facility nearest to you. Proper

recycling and waste disposal will

help conserve resources whilst

preventing detrimental effects on

our health and the environment.

Notice: The sign “Pb” below the

symbol for batteries

indicates that this battery

contains lead.

The marking of products using lasers

The label is attached to the chassis/case and

says that the component uses laser beams

that have been classified as Class 1. It means

that the unit is utilizing laser beams that

are of a weaker class. There is no danger of

hazardous radiation outside the unit.

For Turkey

Bu ürün 26891sayılı Resmi Gazete’de

yayımlanan Elektrikli ve Elektronik Eşyalarda

Bazı Zararlı Maddelerin Kullanımının

Sınırlandırılmasına Dair Yönetmeliğe uygun

olarak üretilmiştir.

This product complies with Directive,

Number 26891 regarding “REGULATION ON

THE RESTRICTION OF THE USE OF CERTAIN

HAZARDOUS SUBSTANCES IN LECTRICAL

AND ELECTRONIC EQUIPMENT”.

Muting upon the reception of a

phone call

To use this feature, connect the MUTE lead

to your telephone using a commercial

telephone accessory. (page 13, 14)

When a call comes in, “CALL” appears.

The audio system pauses.

To continue listen to the audio system

during a call, press SRC. “CALL”

disappear and the audio system resumes.

When a call ends, “CALL” disappear.

The audio system resumes.

EN02-15_KDC-3051R[E]f.indd 3EN02-15_KDC-3051R[E]f.indd 3 8/2/10 9:17:25 AM8/2/10 9:17:25 AM

130.com.ua

Autogood products Internet store “130”

4

Preparation

How to attach/detach the faceplate

2

1

1

2

Do not expose the faceplate to direct

sunlight, excessive heat, or humidity. Also

avoid places with too much dust or the

possibility of water splashing.

Keep the faceplate in its casing while

detached.

The faceplate is a precision piece of

equipment and can be damaged by shocks

or jolts.

To prevent deterioration, do not touch the

terminals of the unit and faceplate with

your fingers.

How to reset your unit

If this unit fails to operate properly, press the

reset button.

The unit returns to

factory settings when the

reset button is pressed.

Initial settings before operations

1

Press SRC to enter [STANDBY] mode.

2

Press the volume knob to enter [FUNCTION] mode.

3

Turn the volume knob to select [INITIAL SET], then press to enter.

4

Turn the volume knob to make a selection, then press to confirm.

See table below for selection.

5

Hold to finish the procedure.

Item Selectable setting (Preset: *)

PRESET TYPE NORM *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/ LW). ;

MIX:

Memorizes one station for each preset button regardless of the selected band (FM1/ FM2/ FM3/ MW/ LW).

KEY BEEP ON */ OFF: Activates/deactivates the keypress tone.

RUSSIAN SET ON: Folder name, file name, song title, artist name, album name are displayed in Russian (if applicable). ;

OFF *: Cancels.

P-OFF WAIT Sets the duration when the unit will automatically turns off (while in standby mode) to save the battery.

–––– : Cancels ; 20M *: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes

BUILTIN AUX ON1 *: Outputs sound of the connected external component when “AUX” is selected as the source. ;

ON2: Outputs sound from the connected external component when “AUX” is selected as the source. When you

turn on the power, the sound attenuates (to prevent noise when no external component is connected). Turn

the volume knob clockwise to return to the previous volume level. ; OFF: Disables “AUX” in source selection.

CD READ 1 *: Automatically distinguishes between audio file disc and music CD. ; 2:

Forces to play as a music CD.

SWITCH PRE REAR */ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on the

rear of the unit (through an external amplifier).

SP SELECT OFF */ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance.

[SWITCH PRE] is selectable only with KDC-3051R/ KDC-3051G/ KDC-315A/ KDC-315R/ KDC-3251RY.

Reset button

EN02-15_KDC-3051R[E]f.indd 4EN02-15_KDC-3051R[E]f.indd 4 8/2/10 9:17:25 AM8/2/10 9:17:25 AM

130.com.ua

Autogood products Internet store “130”

5

ENGLISH

The following indicator lights up when...

ST: A stereo broadcast is received (FM).

IN: A disc is in the unit.

TI: Traffic Information function is turned on.

RDS: RDS service is available.

Basic operations

Volume knob

Loading slot

Detaches the faceplate Display window

Ejects the disc

Auxiliary input jack

When you press or hold the following button(s)...

Button General operation

SRC

Turns on.

Turns off if pressed and held.

Selects the available sources (TUNER, CD, AUX, STANDBY), if the power is

turned on.

• If the source is ready, playback also starts. “CD” is selectable only when a disc is

loaded.

Volume knob

(turn)

Adjusts the volume level.

Selects items.

Volume knob

(press)

Confirms selection.

Enters [FUNCTION] settings.

BAND Selects the FM bands (FM1/ FM2/ FM3) or MW/ LW.

Selects the next folder.

Pauses/resumes playback of a disc.

Mutes the sound while listening to a radio or an external component

connected to the auxiliary input jack.

4

/

¢

Searches for a radio station.

Selects track/file.

Fast-forwards/reverses tracks if pressed and held.

SCRL DISP

Changes the display information.

Scrolls the display information if pressed and held.

Enters clock adjustment mode directly (page 6) if pressed and held while in

clock display screen.

Returns to the previous item.

Exit from setting mode if pressed and held.

EN02-15_KDC-3051R[E]f.indd 5EN02-15_KDC-3051R[E]f.indd 5 8/2/10 9:17:26 AM8/2/10 9:17:26 AM

130.com.ua

Autogood products Internet store “130”

6

Hold to turn on or off the Traffic Information function (not applicable if “MW/ LW” is selected).

Listening to the radio

Hold for about 2 seconds to memorize the current station or the selected Program

Type. (Refer to [PTY SEARCH] on page 7 to select the Program Type.)

Press briefly to recall memorized station (or Program Type after entering the PTY

search mode).

Getting started

Canceling the display

demonstration

The display demonstration is always turned

on unless you cancel it.

When you turn on the power (or after you

reset the unit), the display shows:

[CANCEL

DEMO] \ [PRESS] \

[VOLUME KNOB]

1

Press the volume knob.

[YES] is selected as the initial setup.

2

Press the volume knob again to confirm.

[DEMO

OFF] appears.

If no operation is done for about

15 seconds or if you turn the volume knob

to select [NO] in step

2

, [DEMO

MODE]

appears and the display demonstration

starts.

Setting the demonstration mode

1

Press the volume knob to enter

[FUNCTION].

2

Turn the volume knob to select

[DEMO MODE], then press to enter.

3

Turn the volume knob to select [ON] or

[OFF].

If [ON] is selected, display demonstration

starts if no operation is done for about

20 seconds.

4

Hold to finish the procedure.

Adjusting the clock

1

Press the volume knob to enter

[FUNCTION] mode.

2

Turn the volume knob to select

[SETTINGS], then press to enter.

3

Turn the volume knob to select [CLOCK],

then press to enter.

4

Turn the volume knob to select

[CLOCK ADJ], then press to enter.

Clock hour flashes on the display.

5

Turn the volume knob to adjust the

hour, then press to enter minute

adjustment.

Clock minutes flashes on the display.

6

Turn the volume knob to adjust the

minute, then press to confirm.

Press 4

/

¢ to move between the

hour and minute adjustment.

7

Hold to finish the procedure.

EN02-15_KDC-3051R[E]f.indd 6EN02-15_KDC-3051R[E]f.indd 6 8/2/10 9:17:27 AM8/2/10 9:17:27 AM

130.com.ua

Autogood products Internet store “130”

7

ENGLISH

1

Press SRC to select “TUNER.”

2

Press BAND repeatedly to select a band (FM1/ FM2/ FM3/ MW/ LW).

3

Press 4

/

¢ to search for a station.

Adjust [SETTINGS] mode settings

While listening to the radio...

1

Press the volume knob to enter [FUNCTION] mode.

2

Turn the volume knob to select [SETTINGS], then press to enter.

3

Turn the volume knob to make a selection, then press to confirm.

See table below for selection.

4

Hold to finish the procedure.

Item Selectable setting (Preset: *)

LOCAL SEEK ON: Searches only FM stations with good reception. ; OFF *:

Cancels.

SEEK MODE Selects the tuning mode for

4

/

¢

buttons.

AUTO1 *: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset

memory. ; MANUAL: Manually search for a station.

AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ; NO *:

Cancels (automatic

memorizing is not activated). (Selectable only if [NORM] is selected for [PRESET TYPE].) (page 4)

MONO SET ON: Improves the FM reception (but the stereo effect may be lost). ; OFF *: Cancels (stereo effect resumes).

PTY SEARCH Selects the available Program Type (see table below). Then, press

4

/

¢

to start searching.

Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language

(ENGLISH */ FRENCH/ GERMAN), then press to confirm.

NEWS SET 0M – 90M: Sets the time for receiving the next news bulletin. ; OFF *: Cancels.

AF SET ON *: Automatically searches for another station broadcasting the same program in the same RDS network

with better reception when the current reception is poor. ; OFF:

Cancels.

RDS REG ON *: Switches to another station only in the specific region using the “AF” control. ; OFF: Cancels.

ATP SEEK ON *: Automatically searches for a station with better reception when the traffic information's reception is

poor. ; OFF: Cancels.

[PTY SEARCH] is selectable only when the source is “FM.”

[NEWS SET/ AF SET/ RDS REG/ ATP SEEK] is selectable only when the source is “FM.” If other playback source is selected,

these settings are selectable under [RDS SET] item. (page 11)

Available Program Type:

SPEECH MUSIC NEWS AFFAIRS INFO SPORT EDUCATE

DRAMA CULTURE SCIENCE VARIED POP M (music) ROCK M (music) EASY M (music)

LIGHT M (music) CLASSICS

OTHER M (music)

WEATHER FINANCE CHILDREN SOCIAL

RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY

NATION M (music)

OLDIES FOLK M (music) DOCUMENT

The unit will search for the Program type categorized under

[SPEECH]

or

[MUSIC]

if selected.

[SPEECH]

: White character item. ;

[MUSIC]

: Black character item.

The RDS feature won't work where the service is not supported by any broadcasting station.

If the volume is adjusted during reception of traffic information, the adjusted volume is

memorized automatically. It will be applied the next time Traffic Information function is

turned on.

EN02-15_KDC-3051R[E]f.indd 7EN02-15_KDC-3051R[E]f.indd 7 8/2/10 9:17:28 AM8/2/10 9:17:28 AM

130.com.ua

Autogood products Internet store “130”

8

Selecting Repeat Play

Press number button 4 (REP) repeatedly

to make a selection.

Audio CD : TRAC (track) REPEAT,

REPEAT OFF

MP3/WMA : FILE REPEAT, FOLD (folder)

REPEAT, REPEAT OFF

Selecting Random Play

Press number button 3 (ALL RDM)

repeatedly to make a selection.

Audio CD : DISC RANDOM, RANDOM OFF

MP3/WMA : FOLD (folder) RANDOM,

ALL RANDOM, RANDOM OFF

Press and hold number button

3 (ALL RDM) to select “ALL RANDOM” only

if “RANDOM OFF” is selected initially.

Selecting Scan Play

Press number button 2 (SCAN)

repeatedly to make a selection.

Audio CD : TRAC (track) SCAN, SCAN OFF

MP3/WMA : FILE SCAN, SCAN OFF

If scan play is selected, the unit starts

playing the first 10-second intro of the

music in the disc or the current folder. If

“SCAN OFF” is selected, the unit resumes

normal play of the current song.

Selecting a folder/track/file

1

Press to enter Music Search mode.

“SEARCH” appears, then the current file

name appears on the display.

2

Turn the volume knob to select a folder/

track/file, then press to confirm.

To return to the root folder (or first track for

audio CD), press BAND.

To return to the previous folder, press .

To cancel the Music Search mode, press

and hold .

< or > on the display indicates that

preceded/next folder is available.

1

Press SRC to turn on the power.

2

Insert a disc into the loading slot.

Playback starts automatically.

3

Press to resume/pause playback (if necessary).

Press to select track/file.

Hold to fast-forwards/reverses.

Press to select folder.

Ejects the disc. (“NO DISC” appears and “IN” indicator goes off.)

Listening to a disc

EN02-15_KDC-3051R[E]f.indd 8EN02-15_KDC-3051R[E]f.indd 8 8/2/10 9:17:28 AM8/2/10 9:17:28 AM

130.com.ua

Autogood products Internet store “130”

9

ENGLISH

Preparation : Make sure [ON1] or [ON2] is selected for [BUILTIN AUX]. (page 4)

3.5 mm stereo mini plug

(optional accessory)

Auxiliary input jack

1

Press SRC to select “AUX.”

2

Turn on the external component and start playing.

3

Turn the volume knob to adjust the volume. Portable audio device

(optional accessory)

Listening to the other external

components

Discs that cannot be used

Discs that are not round.

Discs with coloring on the recording surface or discs that are dirty.

You cannot play a Recordable/ReWritable disc that has not been finalized. (For the

finalization process refer to your disc writing software, and your disc recorder instruction

manual.)

3-inch CD cannot be used. Attempt to insert using an adapter can cause malfunction.

Maintenance

Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to

observe this precaution may result in damage to the monitor or unit.

Cleaning the connector: Wipe off dirt on the connector of the unit and faceplate. Use a

cotton swab or cloth.

Handling discs

Do not touch the recording surface of the disc.

Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

Do not use any accessories for the disc.

Clean from the center of the disc and move outward.

Clean the disc with a dry silicon or soft cloth. Do not use any solvents.

When removing discs from this unit, pull them out horizontally.

Remove the rims from the center hole and disc edge before inserting a disc.

EN02-15_KDC-3051R[E]f.indd 9EN02-15_KDC-3051R[E]f.indd 9 8/2/10 9:17:30 AM8/2/10 9:17:30 AM

130.com.ua

Autogood products Internet store “130”

10

1

Press the volume knob to enter [FUNCTION] mode.

2

Turn the volume knob to select [AUDIO CTRL] or [SETTINGS], then press to enter.

3

Turn the volume knob to make a selection, then press to confirm.

See table below for selection.

Repeat step 3 until the desired item is selected/activated.

Press to return to the previous item.

4

Hold to finish the procedure.

[AUDIO CTRL] : While listening to any source except in STANDBY state...

Item Selectable setting (Preset: *)

SUB-W LEVEL –15 — +15 (Preset: 0): Adjusts the subwoofer output level.

BASS BOOST B.BOOST LV1 */ B.BOOST LV2: Selects your preferred bass boost level. ; OFF:

Cancels.

SYSTEM Q NATURAL */ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ GAME: Selects a preset sound mode suitable to the

music genre. (Selects [USER] to use the customized bass, middle, and treble settings.)

BASS ADJUST BASS C FRQ: 60/ 80/ 100 */ 200:

Selects the center frequency.

BASS LEVEL: –8 — +8 (Preset: 0):

Adjusts the level.

BASS Q FCTR: 1.00 */ 1.25/ 1.50/ 2.00:

Adjusts the Q factor.

BASS EXTEND: ON: Turns on the extended bass. ; OFF *:

Cancels.

MID ADJUST MID C FRQ: 0.5K/ 1.0K */ 1.5K/ 2.5K:

Selects the center frequency.

MID LEVEL: –8 — +8 (Preset: 0):

Adjusts the level.

MID Q FCTR: 0.75/ 1.00 */ 1.25:

Adjusts the Q factor.

TRE ADJUST TRE C FRQ: 10.0K/ 12.5K */ 15.0K/ 17.5K:

Selects the center frequency.

TRE LEVEL: –8 — +8 (Preset: 0):

Adjusts the level.

BALANCE L15 — R15 (Preset: 0): Adjusts the left and right speaker output balance.

FADER R15 — F15 (Preset: 0): Adjusts the rear and front speaker output balance.

SUB-W SET ON *: Turns on the subwoofer output. ; OFF:

Cancels.

DETAIL SET LPF SUB-W: THROUGH *: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/ 160HZ: Frequencies

higher than 85 Hz/ 120 Hz/ 160 Hz are cut off.

SUB-W PHASE: REV

(180°)/ NORM

(0°)

*: Selects the phase angle of the subwoofer output to be in line

with the speaker output for optimum performance. (Selectable only if a setting other than

[THROUGH] is selected for [LPF SUB-W].)

SUPREME SET: ON *: Creates realistic sound by interpolating the high-frequency components that are lost

in MP3/WMA audio compression. ; OFF: Cancels. (Selectable only when playback an MP3/

WMA disc.)

VOL OFFSET:

(Preset: 0)

–8 — +8 (for AUX) ; –8 — 0 (for other sources): Presets the volume adjustment level of

each source. The volume level will automatically increase or decrease when you change the

source. (Before making an adjustment, select the source you want to adjust.)

KDC-3051R/ KDC-3051G/ KDC-315A/ KDC-315R/ KDC-3251RY only:

[SUB-W LEVEL/ SUB-W SET/ LPF SUB-W/ SUB-W PHASE] is selectable only if [SWITCH PRE] is set to [SUB-W]. (page 4)

[SUB-W LEVEL/ LPF SUB-W/ SUB-W PHASE] is selectable only if [SUB-W SET] is set to [ON].

Select a source before making a source tone memory adjustment, [BASS ADJUST/ MID ADJUST/ TRE ADJUST].

Function settings

EN02-15_KDC-3051R[E]f.indd 10EN02-15_KDC-3051R[E]f.indd 10 8/2/10 9:17:31 AM8/2/10 9:17:31 AM

130.com.ua

Autogood products Internet store “130”

11

ENGLISH

[SETTINGS]

Item Selectable setting (Preset: *)

AUX NAME AUX */ DVD/ PORTABLE/ GAME/ VIDEO/ TV: Selects the desired name for the connected component.

(Selectable only if “AUX” is selected as the source.)

CLOCK CLOCK ADJ: (For details, see page 6.)

TIME SYNC: ON *: Synchronizes the RDS station time data and the unit's clock. ; OFF: Cancels.

DISPLAY DIMMER SET: ON: Dims the display illumination. ; OFF *: Cancels.

TEXT SCROLL: AUTO/ ONCE: Selects to scroll the display information automatically, or scroll only once. ;

OFF *: Cancels.

RDS SET NEWS SET/ AF SET/ RDS REG/ ATP SEEK: Selectable only if any source other than tuner source is selected.

(For details, refer page 7.)

Troubleshooting

Symptom Remedy/Cause

Sound cannot be heard. Adjust the volume to the optimum level.

/

Check the cords and connections.

“PROTECT” appears and no

operations can be done.

Check to be sure the terminals of the speaker leads are covered with insulating tape properly,

then reset the unit. If “PROTECT” does not disappear, consult your nearest service center.

The unit does not work at all. Reset the unit.

[P-OFF WAIT]

does not work. Turn off the demonstration mode. (page 6)

Radio reception is poor. / Static

noise while listening to the radio.

Connect the antenna firmly. / Pull the antenna out all the way.

“IN” flashes. The CD player is not operating properly. Reinsert the disc properly. If the condition did not

improve, turn off the unit and consult your nearest service center.

CD-R/CD-RW cannot be played

back and tracks cannot be skipped.

Insert a finalized CD-R/CD-RW (finalize with the component which you used for

recording).

Disc sound is sometimes

interrupted.

Stop playback while driving on rough roads. / Change the disc. / Check the cords and

connections.

“NA FILE” appears. The unit is playing an unsupported audio file.

“NO DISC” appears. Insert a playable disc into the loading slot.

“TOC ERROR” appears. The CD is quite dirty. / The CD is upside-down. / The CD is scratched a lot. Try another

disc instead.

“ERROR 99” appears. The unit is malfunctioning for some reason. Press the reset button on the unit. If the

“ERROR 99” code does not disappear, consult your nearest service center.

“COPY PRO” appears. A copy-protected file is played.

Noise is generated. Skip to another track or change the disc.

Tracks cannot play back as you

have intended them to play.

Playback order is determined when files are recorded.

“READING” keeps flashing. Longer readout time is required. Do not use too many hierarchies and folders.

Elapsed playing time is not correct. This is caused by how the tracks are recorded.

Correct characters are not displayed

(e.g. album name).

This unit can only display letters (upper case), numbers, and a limited number of symbols.

Cyrillic alphabets (upper case) can also be displayed if [RUSSIAN SET] is set to [ON].

(page 4)

EN02-15_KDC-3051R[E]f.indd 11EN02-15_KDC-3051R[E]f.indd 11 8/5/10 9:07:11 AM8/5/10 9:07:11 AM

130.com.ua

Autogood products Internet store “130”

12

Installation/connection

Part list:

A Faceplate.............................................................. (×1)

B Escutcheon ......................................................... (×1)

C Mounting sleeve ............................................. (×1)

D Casing for faceplate ...................................... (×1)

E Wiring harness .................................................. (×1)

F Removal tool .................................................... (×2)

Basic procedure

1

Remove the key from the ignition

switch, then disconnect the · terminal

of the car battery.

2

Make proper input and output wire

connections.

\ “Wiring connection” (page 13, 14)

3

Install the unit to your car.

\ “Installing the unit” (page 14)

4

Reconnect the · terminal of the car

battery.

5

Reset the unit. (page 4)

Warning

The unit can only be installed in a car with

a 12 V DC power supply, negative ground.

If you connect the ignition wire (red) and

the battery wire (yellow) to the car chassis

(ground), you may cause a short circuit,

that in turn may start a fire. Always connect

those wires to the power source running

through the fuse box.

Disconnect the battery's negative terminal

and make all electrical connections before

installing the unit.

Insulate unconnected wires with vinyl tape

or other similar material. To prevent a short

circuit, do not remove the caps on the ends

of the unconnected wires or the terminals.

Be sure to ground this unit to the car's

chassis again after installation.

Caution

If your car's ignition does not have an ACC

position, connect the ignition wires to a

power source that can be turned on and

off with the ignition key. If you connect

the ignition wire to a power source with

a constant voltage supply, as with battery

wires, the battery may die.

Do not use your own screws. Use only the

screws provided.

Install this unit in the console of your

vehicle. Make sure the faceplate will not hit

the lid of the console (if any) when closing

and opening.

After the unit is installed, check whether

the brake lamps, blinkers, wipers, etc. on

the car are working properly.

Mount the unit so that the mounting angle

is 30° or less.

If the fuse blows, first make sure the wires

aren't touching to cause a short circuit,

then replace the old fuse with one with the

same rating.

Connect the speaker wires correctly to the

terminals to which they correspond. The

unit may be damaged or fail to work if you

share the · wires or ground them to any

metal part in the car.

When only two speakers are being

connected to the system, connect the

connectors either to both the front output

terminals or to both the rear output

terminals (do not mix front and rear).

Do not touch the metal part of this unit

during and shortly after the use of the

unit. Metal part such as the heat sink and

enclosure become hot.

Mounting and wiring this product requires

skills and experience. For safety's sake, leave

this work to professionals.

If you experience problems during

installation, consult your Kenwood dealer.

EN02-15_KDC-3051R[E]f.indd 12EN02-15_KDC-3051R[E]f.indd 12 8/2/10 9:17:31 AM8/2/10 9:17:31 AM

130.com.ua

Autogood products Internet store “130”

13

ENGLISH

Wiring connection

KDC-3251RY

KDC-3051R/ KDC-3051G/

KDC-315A/ KDC-315R

For KDC-3051R/ KDC-3051G/ KDC-315A/ KDC-315R/ KDC-3251RY

Fuse (10 A)

Antenna terminal (JASO)

Light blue/yellow

(Steering remote control wire)

KDC-3051R/ KDC-3051G/ KDC-315A/ KDC-315R: To the

steering wheel remote control adapter (optional accessory)

Blue/White

(Power control/motor antenna

control wire)

Brown

(Mute control wire)

To the power control terminal when using the optional power

amplifier, or to the antenna control terminal in the vehicle.

To the terminal that is grounded when either the telephone rings

or during conversation. (To connect the Kenwood navigation

system, consult your navigation manual.)

Yellow (A4)

Red (Ignition wire)

Red (A7)

Yellow (Battery wire)

Rear/subwoofer

output terminals

Front output terminals

Rear/subwoofer output terminals

Pin

Color and function

Pin

Color and function

A4

A5

A7

A8

Yellow

Blue/White

Red

Black

Battery

Power control

Ignition (ACC)

Earth (ground) connection

B1 / B2

B3 / B4

B5 / B6

B7 / B8

Purple

ª

/ Purple/black ·

Gray

ª

/ Gray/black ·

White

ª

/ White/black ·

Green

ª

/ Green/black ·

Rear speaker (right)

Front speaker (right)

Front speaker (left)

Rear speaker (left)

ISO connectors

Connecting the ISO connectors on some VW/Audi or

Opel (Vauxhall) automobiles

You may need to modify the wiring of the supplied

wiring harness as illustrated below.

Unit Vehicle

A7 (Red)

Ignition wire

(Red)

A4 (Yellow)

Default wiring

Battery wire

(Yellow)

EN02-15_KDC-3051R[E]f.indd 13EN02-15_KDC-3051R[E]f.indd 13 8/2/10 9:17:31 AM8/2/10 9:17:31 AM

130.com.ua

Autogood products Internet store “130”

14

2

1

Installing the unit

Connect the wiring harness to the unit. Other wiring

connection has been completed earlier. (page 13, 14)

Before attaching, make sure

the direction of the

escutcheon is correct. (Wider

hooks on the top side.)

Dashboard of your car

For KDC-3051RY/ KDC-3051GY

Bend the appropriate tabs

to hold the mounting sleeve

firmly in place.

Fuse (10 A)

Antenna terminal (JASO)

Blue/White

Brown

Blue

To the terminal that is grounded when either the telephone rings or

during conversation. (To connect the Kenwood navigation system,

consult your navigation manual.)

Car fuse box

Car fuse box

Battery

Ignition key switch

Red (Ignition wire)

Yellow (Battery wire)

Black (Ground wire)

To the metallic body or chassis of the car

White (+) / White/black (–) : To front speaker (left)

Gray (+) / Gray/black (–) : To front speaker (right)

Green (+) / Green/black (–) : To rear speaker (left)

Purple (+) / Purple/black (–) : To rear speaker (right)

(Motor antenna control wire)

(Power control wire)

(Mute control wire)

To the power control terminal when using the optional power amplifier.

To the antenna control terminal in the vehicle.

EN02-15_KDC-3051R[E]f.indd 14EN02-15_KDC-3051R[E]f.indd 14 8/2/10 9:17:31 AM8/2/10 9:17:31 AM

130.com.ua

Autogood products Internet store “130”

15

ENGLISH

Removing the unit

FM tuner section

Frequency range (50 kHz space):

87.5 MHz — 108.0 MHz

Usable sensitivity (S/N = 26

dB):

1.0 μV/75 Ω

Quieting sensitivity (DIN S/N = 46

dB):

2.5 μV/75 Ω

Frequency response (±3

dB):

30 Hz — 15 kHz

Signal-to-Noise ratio (MONO):

63 dB

Stereo separation (1

kHz):

40 dB

MW tuner section

Frequency range (9

kHz space):

531 kHz — 1 611 kHz

Usable sensitivity (S/N = 20

dB):

36 μV

LW tuner section

Frequency range:

153 kHz — 279 kHz

Usable sensitivity (S/N = 20

dB):

57 μV

CD player section

Laser diode:

GaAIAs

Digital filter (D/A):

8 Times Over Sampling

D/A converter:

24 Bit

Spindle speed:

500 rpm — 200 rpm (CLV)

Wow & Flutter:

Below Measurable Limit

Frequency response (±1

dB):

20 Hz — 20 kHz

Total harmonic distortion (1

kHz):

0.01 %

Signal-to-Noise ratio (1

kHz):

105 dB

Dynamic range:

90 dB

MP3 decode:

Compliant with MPEG-1/2 Audio

Layer-3

WMA decode:

Compliant with Windows

Media Audio

Audio section

Maximum output power:

50 W × 4

Output power (DIN 45324, +B = 14.4 V):

30 W × 4

Speaker impedance:

4 Ω — 8 Ω

Tone action:

Bass:

100 Hz ±8 dB

Middle:

1 kHz ±8 dB

Treble:

10 kHz ±8 dB

For KDC-3051R/ KDC-3051G/ KDC-315A/ KDC-315R/

KDC-3251RY

:

Preout level / load (CD):

2 000 mV/10 kΩ

Preout impedance:

≤ 600 Ω

Auxiliary input section

Frequency response (±3

dB):

20 Hz — 20 kHz

Input maximum voltage:

1 200 mV

Input impedance:

10 kΩ

General

Operating voltage (11

V — 16

V allowable):

14.4 V

Maximum current consumption:

10 A

Installation size (W × H × D):

182 mm × 53 mm × 158 mm

Weight:

1.3 kg

Specifications

1

Detach the faceplate.

2

Engage the catch pin on the removal

tools into the holes on both sides of the

escutcheon, then pull it out.

3

Insert the removal tools deeply into the

slots on each side, then follow the arrows

instructions as shown on the right.

About Audio file

Playable Audio file: MP3 (.mp3), WMA

(.wma)

Playable disc media: CD-R/RW/ROM

Playable disc file format: ISO 9660 Level

1/2, Joliet, Romeo, Long file name.

Although the audio files are complied with

the standards listed above, the play maybe

impossible depending on the types or

conditions of media or device.

Subject to change without notice.

EN02-15_KDC-3051R[E]f.indd 15EN02-15_KDC-3051R[E]f.indd 15 8/10/10 3:56:06 PM8/10/10 3:56:06 PM

130.com.ua

Autogood products Internet store “130”