Kenwood Car Stereo System Kdc U7056Bt Users Manual
Kenwood Car Stereo System KDC-U7056DAB 51cb966844d10
2015-01-23
: Kenwood Kenwood-Kenwood-Car-Stereo-System-Kdc-U7056Bt-Users-Manual-263182 kenwood-kenwood-car-stereo-system-kdc-u7056bt-users-manual-263182 kenwood pdf
Open the PDF directly: View PDF .
Page Count: 24
KDC-U7056DAB
KDC-U7056BT
KDC-U7056BTL
CD-RECEIVER
Quick Start Guide
© 2012 JVC KENWOOD Corporation
B59-2188-10_01_13Stepup_QSG_M_En.indd 1
B59-2188-10/01 (M)
13/06/04 13:3
Contents
Before use
About the Quick Start Guide.......................... 2
Before use.............................................................. 2
Appendix ............................................................... 4
Preparations.......................................................... 4
General operations............................................. 6
Playing music (CD/USB/iPod)......................... 7
Listening to the radio/Digital radio.............. 8
Hands-free phoning........................................... 9
Before installation.............................................10
Connecting wires to terminals.....................12
3 way speaker system setup.........................14
Installing/Removing the unit........................16
Installing the Microphone unit ...................17
Installing the Digital radio antenna...........17
Specifications......................................................21
# WARNING
To prevent injuries or a fire, take
the following precautions:
About the Quick Start
Guide
This Quick Start Guide describes basic
functions of this unit.
For functions not described in this Guide,
refer to the Instruction Manual on the
following website:
manual.kenwood.com/edition/im362/
• Stop the car before operating the unit.
• To prevent a short circuit, never put or
leave any metallic objects (such as coins
or metal tools) inside the unit.
! CAUTION
• Adjust the volume so that you can hear
sound outside the car. Driving with the
volume adjusted to a too high level may
cause an accident.
• Wipe off the dirt on the panel with a dry
silicon or soft cloth.
Failure to observe this precaution may
result in damage to the monitor or unit.
Cleaning the connector
The unit may not function properly if the
connector between the unit and faceplate
are dirty. Detach the faceplate and clean the
connector with a cotton swab gently, being
careful not to damage the connector.
Connector
Condensation
When the car is air-conditioned, moisture
may collect on the laser lens. This may cause
disc read errors. In this case, remove the disc
and wait for the moisture to evaporate.
Notes
To refer to the Instruction Manual, a browser
such as Internet Explorer® 7 or later, Firefox®
3.6 or later, Chrome™ 20 or later, Safari® 5.1
or later, iOS Safari® 4.0 or later, or Android™
2.2 or later is required.
2 | Quick Start Guide
B59-2188-10_01_13Stepup_QSG_M_En.indd 2
• If you experience problems during
installation, consult your Kenwood dealer.
• When you purchase optional accessories,
check with your Kenwood dealer to make
sure that they can work with your model
and in your area.
• Characters that conform to ISO 8859-1
can be displayed.
13/06/04 13:3
• To display characters in the following
language, additional setting is required.
KDC-U7056DAB KDC-U7056BT
- Chinese
Refer to “Chinese” of <12-5. Initial
settings>.
KDC-U7056BTL
- Arabic
- Persian
- Thai
Refer to “TAG Language” of <12-5. Initial
settings>.
How to reset your unit
If the unit fails to operate properly, press the
Reset button. The unit returns to the factory
settings.
Reset button
About the discs used with this unit
• This unit can only play the CDs with
.
• The following discs cannot be used:
-- A disc that is not round
-- A disc with coloring on the recording
surface or a disc that is dirty
-- A recordable/rewritable disc that has
not been finalized (For the finalization
process, refer to the instruction manual
that came with your disc writing
software or your disc recorder.)
-- An 8 cm (3 inch) disc (An attempt
to insert using an adapter can cause
malfunction.)
Handling discs
• Do not touch the recording surface of
the disc.
• Do not stick tape etc. on the disc, or use a
disc with tape stuck on it.
• Do not use any accessories for the disc.
• Do not use any solvents to clean discs.
Use a dry silicon or soft cloth.
• Clean the disc by moving the cloth
outward from the center of the disc.
• When removing a disc from this unit, pull
it out horizontally.
• If the center hole or outside rim of a disc
has burrs, remove them before inserting
a disc.
B59-2188-10_01_13Stepup_QSG_M_En.indd 3
The illustrations of the display and panel appearing
in this manual are examples used to explain more
clearly how the controls are used. Therefore, what
appears on the display in the illustrations may differ
from what appears on the display on the actual
equipment, and some of the images on the display
may be inapplicable.
! CAUTION
• Keep battery out of reach of children
and in original package until ready to
use. Dispose of used batteries promptly.
If swallowed, contact a physician
immediately.
• Do not leave the battery near fire or
under direct sunlight. A fire, explosion
or excessive heat generation may result.
• Do not set the remote control in hot
places such as on the dashboard.
• The Lithium battery is in danger of
explosion if replaced incorrectly.
Replace it only with the same or
equivalent type.
English | 3
13/06/04 13:3
Appendix
Preparations
About Audio file
• Playable Audio files
AAC-LC (.m4a), MP3 (.mp3), WMA (.wma),
WAV (.wav) of USB device
• Playable disc media
CD-R/RW/ROM
• Playable disc file formats
ISO 9660 Level 1/2, Joliet, Long file name.
• Playable USB devices
USB mass storage class
• Playable USB device file systems
FAT12, FAT16, FAT32
The online manual about
audio files is put on the site,
www.kenwood.com/cs/ce/audiofile/.
Models of iPods/iPhones that can
be connected to this unit
Made for
• iPod touch (4th generation)
• iPod touch (3rd generation)
• iPod touch (2nd generation)
• iPod touch (1st generation)
• iPod classic
• iPod with video
• iPod nano (6th generation)
• iPod nano (5th generation)
• iPod nano (4th generation)
• iPod nano (3rd generation)
• iPod nano (2nd generation)
• iPod nano (1st generation)
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
For information on the compatibility with
iPod/iPhone software, visit www.kenwood.
com/cs/ce/ipod/.
Before using this unit for the first
time
When this unit is first turned on, the
interactive menu appears for setting the
interface language and demonstration
mode. This menu disappears when no
action is taken for 15 seconds.
1
KDC-U7056BTL only:
Select the interface language to display
the menu items of the Function setting,
from English, Arabic, and Persian.
Turn [Control] knob to select the
language, and then press [Control] knob.
2 KDC-U7056BTL only:
If you selected English in step 1, select
the language to display the audio file
information, from English and Thai.
(Arabic or Persian is automatically
selected if you selected Persian or Arabic
in step 1.)
3 Press [Control] knob when the message
“To cancel DEMO Press the volume knob”
appears.
4 Turn [Control] knob to select “YES”, and
then press [Control] knob.
The interface language and
demonstration mode can also be set
with the Function setting. Refer to <124. Demonstration mode setting> in
Instruction manual
4 | Quick Start Guide
B59-2188-10_01_13Stepup_QSG_M_En.indd 4
13/06/04 13:3
[Control] knob (Volume knob)
[1/6] Release
Adjusting the clock
1
Detaching/ Attaching the faceplate
Press [Control] knob to enter the
Function setting mode.
The item can be selected and
determined as follows.
”Settings” Á “Clock & Date” Á “Clock
Adjust”
Turn [Control] knob to select the item,
and press [Control] knob.
Press the
Release button.
2 Turn [Control] knob to adjust the hour,
and then press [Control] knob.
3 Turn [Control] knob to adjust the
minute, and then press [Control] knob.
4 Press and hold [1/6] to exits the
Function setting mode.
B59-2188-10_01_13Stepup_QSG_M_En.indd 5
!
• Remove the faceplate at once after
pressing the Release button; otherwise it
can fall down due to vibration.
• The faceplate is a precision component of
the unit and can be damaged by shocks
or jolts.
• Keep the faceplate in its case while
detached.
• Do not place the faceplate (and case) in
areas exposed to direct sunlight, excessive
heat or humidity. Also avoid places with
too much dust or the possibility of water
splashing.
English | 5
13/06/04 13:3
General operations
USB terminal
[SRC] [Control] knob (Volume knob)
Auxiliary input
Power
To turn the power ON, press [SRC].
To turn the power OFF, press and hold
[SRC].
Source selection
Pressing [SRC] repeatedly switches
among sources.
Source
Display
Standby
“STANDBY”
Digital radio[2]
“DIGITAL RADIO”
Tuner
“TUNER”
USB device connected to front USB
“USB (FRONT)”
terminal
USB device connected to rear USB
“USB (REAR)”
terminal
[1]
iPod connected to front USB terminal “iPod (FRONT)”
iPod connected to rear USB terminal[1] “iPod (REAR)”
Pandora® of iPod connected to front “Pandora
USB terminal[1][2][3]
(FRONT)”
Pandora of iPod connected to rear USB “Pandora
terminal[1][2][3]
(REAR)”
Pandora of device connected via
“Pandora”
[1][2][3]
Bluetooth
aha™ of iPod connected to front USB “aha (FRONT)”
terminal[1]
aha™ of iPod connected to rear USB “aha (REAR)”
terminal[1]
aha™ of device connected via
“aha”
Bluetooth[1]
Bluetooth audio
CD[1]
Auxiliary Input
“BT AUDIO”
“CD”
“AUX”
This source can be selected only when it can
be played.
Function of KDC-U7056DAB.
[3]
Function of KDC-U7056BT.
[1]
[2]
Volume
Turn [Control] knob to adjust the sound
volume.
USB terminal
A USB device or iPod can be connected.
The CA-U1EX (Max. 500mA) or KCA‑iP102
(optional accessories) is recommended
to connect a USB device or iPod.
Auxiliary input
A portable audio device can be
connected with a stereo mini-plug (3.5
mm ø).
6 | Quick Start Guide
B59-2188-10_01_13Stepup_QSG_M_En.indd 6
13/06/04 13:3
Playing music (CD/USB/iPod)
Disc slot
CA-U1EX[1]
[G]
Disc slot cover
[Control] knob
KCA-iP102[1]
[1/6]
[E/F] [R/S]
REAR USB indicator
Playing a disc
Open the Disc slot cover upward.
Insert a disc in the Disc slot.
When it is inserted, the source is
switched automatically and playback
starts.
Close the Disc slot cover.
Playing a USB device/ iPod
Connect a USB device or iPod to the USB
terminal as shown above.
When it is connected, the source is
switched automatically and playback
starts.
You can connect the iPod or USB device
to either one of the USB terminals
provided at the front and rear of this unit.
If you connect it to the rear USB terminal,
the “REAR USB” indicator stays lit.
optional accessories
[1]
Selecting an audio file folder
Press [R] or [S].
Selecting a song (track or file)
Press [E] or [F].
Fast-forwarding or fastbackwarding a song (track or file)
Press and hold [E] or [F].
B59-2188-10_01_13Stepup_QSG_M_En.indd 7
USB Terminal
Pause and play a song (track or
file)
Press and hold [1/6].
Music search
You can search for the song you want to
play.
1 Press [1/6].
2 Search for a song.
Operation type
Operation
Selecting items
Turn [Control] knob.
Determining selection
Press [Control] knob.
Returning to previous item Press [1/6].
To cancel music search in audio files or
iPod, Press and hold [1/6].
Ejecting disc
Open the Disc slot cover upward, and
press [G].
Removing USB device/ iPod
Switch to a source other than USB,
iPod, Pandora, and Aha Radio, and then
remove the USB device.
Data contained in the USB device/ iPod
may be damaged if you remove it when
it is used as the active source.
English | 7
13/06/04 13:3
Listening to the radio/Digital radio
[SRC] [Control] knob
[1/6]
[R]
[E/F]
Selecting a tuner source
4 Turn [Control] knob to select preset
Selecting a band (FM or AM)
(Tuner only)
Recalling the stations in the
memory
Press [SRC] to select “TUNER” or “DIGITAL
RADIO” (KDC-U7056DAB only). Refer to