Kenwood Car Stereo System Kdc X597 Users Manual 113KDCX597
KDC-X597 to the manual 906096e3-7a03-45ae-b744-e366d2f37281
2015-01-23
: Kenwood Kenwood-Kenwood-Car-Stereo-System-Kdc-X597-Users-Manual-263203 kenwood-kenwood-car-stereo-system-kdc-x597-users-manual-263203 kenwood pdf
Open the PDF directly: View PDF 
.
Page Count: 24
| Download | |
| Open PDF In Browser | View PDF |
KENWOOD KDC-X597 KDC-BTSSSU KDC-BT355U CD-RECEIVER INSTRUCTION MANUAL AMPLI-TUNER LECTEUR DE CD MODE D'EMPLOI REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM MANUAL DE INSTRUCCIONES JVC KENWOOD Corporation /IIIJI -lliil Designed for Windows ~-™ Media™ Made for ~ iPod works with CiPhone PANDOR.A Take the time to read through this instrudion manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CO-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or seNice on the product. Model KDC-X597/ KDC-BTSSSU/ KDC-BT355U Serial number _ _ _ _ __ US Residents Only Register Online ~:~: ~'>-: ~~,-~ :- . - -._- - - - © 2012 JVC KENWOOD Corporation - ' ~ ~ --._- --_ "-- .' ·--~-: ~'.: ; -_ ~~-~~ ~-· ~~-:~~:~:~~:~~:~~:~::.~:-~~f;~;~~:~5~~~~f~:::i~~::Ji GET0858-001 A (KW/KO) CONTENTS BEFORE USE BEFORE USE 2 BASICS 3 GETTING STARTED 4 RADIO 5 CD I USB I iPod 6 AUX 7 Pandora A warning Do not operate any function that takes your attention away from safe driving. A caution Volume setting: • Adjust the volume so that you can hear sounds outside the car to prevent accident. • Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level. • • • • 8 (for l:~•!il!f.il~/ 13•Ita:if.i-i-11)) 8 SiriusXM™ (for 13•!il!f.il~/ 13nea:if.i-i-11J) Remote control (RC-406): • Do not leave the remote control in hot places such as on the dashboard. • The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type. • The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like. • Keep battery out of reach of children and in original package until ready to use. Dispose of used batteries promptly. If swallowed, contact a physician immediately. 8 BLUETOOTH 8 10 AUDIO SETTINGS 14 DISPLAY SETTINGS 15 MORE INFORMATION 16 TROUBLESHOOTING 17 SPECIFICATIONS 19 r-.v~;i~t;~~-~~-;------------------------------------------------------------------------------- -------------------------------------------------------------------1 INSTALLATION I CONNECTION 20 i Cleaning the unit: Wipe off dirt on the faceplate with a dry silicon or soft cloth. CALIFORNIA, USA ONLY This perchlorate WARNING applies only to the product sold or distributed in California USA "Perchlorate Material-special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate." j 1 r---------------------------------------------------------------------------1 I How to read this manual I • Operations explained mainly using buttons I on the faceplate. • [XX] indicates the selected items. • (-+XX) indicates references are available on L the stated page 2 General: Avoid using the USB device or iPod/iPhone if it might hinder driving safety. Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data. Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short circuit. If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate. ! ! I I I n~~~~-------_j Cleaning the connector: Detach the faceplate and clean the connector with a cotton swab gently, be1ng careful not to damage the connector. I 1 !KENWOOD I~ ~ ~ o I I• ! Handling discs: . . ~ i Do not t~uch the recordmg su.rface of the d.1sc. . . Connector (on the reverse ! Do not st1ck tape etc. on. the d1sc, or .use a d1sc w1th tape stuck on 1t. side of the faceplate) Do not use any accessones for the d1sc. i I • Clean from the center of the disc and move outward. ! I • Clean the disc with a dry silicon or soft cloth. Do not use any solvents. i I • When removing discs from this unit, pull them out horizontally. l IL_ _____________ • Remove burrs from the center hole and disc edge before inserting a disc. I ____ ___________________________________ ____ _ ___ _ ____ _ ____ _ _ _ _ _ __________________________ _ _ _ __________________________ ____________________ ___ _________ _j j 1 • 1 • 1 • l BASICS Faceplate Remote control (RC-406) rr~~~~~~::rL Remote sensor (Do not expose Volume knob (turn/press) to bright sunlight.) r 13~•I=I§r=:=i~=tF=tF=tii=)=I====L=o=a=d g s Iot Detach Pull out the insulation sheet when using for the first time. How to reset How to replace the battery Detach button CR202s:Q ~3 Your preset adjustments will also be erased. Turn on the power Press(!) SRC. • Press and hold to turn off the power. Press and hold SRC to turn off the power. (Pressing SRC does not turn on the power.) Adjust the volume Turn the volume knob. Press VOL/'.... or VOL "'vi'. ! I _j Press ATT during playback to attenuate the sound. • Press again to cancel. Select a source Press(!) SRC repeatedly. Press SRC repeatedly. Change the display information* Press SCRL DISP repeatedly. • Press and hold to scroll the current display information. ( not available) * l:i•II§:iite~ill: You can also select to turn off the display information by pressing SCRL DISP repeatedly. ENGLISH I 3 GETTING STARTED 1 Press t!> SRC to enter [STANDBY). 2 Press the volume knob to enter [FUNOION). 3 Turn the volume knob to select [INITIAL SET), then press the knob. 4 Turn the volume knob to make a selection (see the following table), then press the knob. 5 Press and hold~ to exit. When you turn on the power (or after you reset the unit), the display shows: //CANCEL DEMO'' .. //PRESS// .. 'VOLUME KNOB// 1 Press the volume knob. • To return to the previous hierarchy, press~. Default: XX PRESET TYPE NORMAL/ NORM: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM).; MIX: Memorizes one station or SiriusXM channel for each preset button regardless of the selected band or SiriusXM channel. KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates. PANDORASRC 13•Iti!Jett4t •~olii:Jie1e1e11J: [YES] is selected for the initial setup. 2 Press the volume knob again. //DEMO OFF// appears. ON: Enables PANDORA in source selection.; OFF: Disables.(~ 8) 1 Press the volume knob to enter [FUNOION). 2 Turn the volume knob to select [SETTINGS], then press the knob. 3 Turn the volume knob to select [CLOCK], then press the knob. BUILT-IN AUX/ BUILTIN AUX ON: Enables AUXin source selection.; OFF: Disables.(~ 7) CD READ 1: Automatically distinguishes between audio file disc and music CD.; 2: Forces to play as a music CD. No sound can be heard if an audio file disc is played. 4 Turn the volume knob to select [CLOCK ADJUST]/ [CLOCK ADJ], then press the knob. 5 Turn the volume knob to adjust the hour, then press the knob. 6 Turn the volume knob to adjust the minute, then press the knob. Press~ I~ to move between the hour and minute adjustment. 7 Press and hold ~ to exit. SWITCH PRE l:i•M:iite1e11l: REAR/ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on the rear (through an external amplifier). SP SELECT OFF/ 5/4/ 6 x 9/6/ OEM: Selects according to the speaker size (5 inches or 4 inches, 6x9 inches or 6 inches) or OEM speakers for optimum performance. (or) ------------------------------------------~ Press and hold SCRL DISP to enter clock adjustment mode directly while in clock display screen. Then, perform steps 5 and 6 above to set the clock. 4 F/W UP xx.xx YES: Starts upgrading the firmware.; NO: Cancels (upgrading is not activated). For details on how to update the firmware, see: www.kenwood.com/cs/ce/ RADIO Default XX 1 Press(!) SRC to select TUNER. 2 Press C\ repeatedly (or press *AM- I #FM+ on RC-406) to select FM11 FM21 FM31 AM. 3 Press~ I~ (or press~ I~(+) on RC-406) to search for a station. • • To store a station: Press and hold one of the number buttons (1 to 6). To select a stored station: Press one of the number buttons (1 to 6) (or SEEK MODE Selects the tuning method for the~ I~ buttons. AUTOl: Automatically searches for a station.; AUT02: Searches for a preset station.; MANUAL: Manually search for a station. AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception.; NO: Cancels. (Selectable only if [NORMAL] I [NORM] is selected for [PRESET TYPE].)(~ 4) MONO SET ON: Improves the FM reception, but the stereo effect may be lost.; OFF: Cancels. PTYSEARCH Selects the available Program Type (see below), then, Tl ON: Allows the unit to temporarily switch to Traffic Information.; OFF: Cancels. press~ I~ to start. press one of the number buttons (1 to 6) on RC-406). ON: Allows the unit to temporarily switch to Traffic Information. ; OFF: Cancels. 1 Press *AM- I #FM+ to select a band. 2 Press DIRECT to enter Direct Access Tuning. (for FM) or"----~~ (for AM) appears on the display. 3 Press the number buttons to enter a frequency. 4 Press~ I~(+) to search for a frequency. 11 "---. - • To cancel, press~. • If no operation is done for 10 seconds after step 3, Direct Access Tuning is automatically canceled. 1 Press the volume knob to enter [FUNaiON]. 2 Turn the volume knob to select [SETTINGS], then press the knob. • [MONO SET]/ [PTY SEARCH]/ [TI] is selectable only when the source is FM. • Available Program Type: SPEECH: NEWS, INFORM (information), SPORTS, TALK, LANGUAGE, REL TALK (religious talk), PERSNLTY (personality), PUBLIC, COLLEGE, HABL ESP (spanish talk), MUSC ESP (spanish music), HIP HOP, WEATHER MUSIC: ROCK, CLS ROCK (classic rock), ADLT HIT (adult hits), SOFT RCK (softrock), TOP 40, COUNTRY, OLDIES, SOFT, NOSTALGA (nostalgia), JAZZ, CLASSICL (classical), R& B (rhythm and blues), SOFT R&B (soft rhythm and blues), REL MUSC (religious music) The unit will search for the Program Type categorized under [SPEECH] or [MUSIC] if selected. • If the volume is adjusted during reception of traffic information or alarm, the adjusted volume is memorized automatically. It will be applied the next time traffic information or alarm function is turned on. 3 Turn the volume knob to make a selection (see the following table), then press the knob. 4 Press and hold~ to exit. ENGLISH I 5 CD I USB I iPod CD ~: Label side Eject disc Note: Pairing request (via Bluetooth) is automatically activated if an iPhone/ iPod touch is connected through the USB input terminal. (-t10, 12) ttl : Applicable - : Not applicable The source changes to CD and playback starts. Pause or resume playback Press 6 USB Select a track/file Press~ I~ (or~ I~(+) Select a folder Press 1- I 2 +(or *AM- I #FM+ on RC-406). USB input terminal ~:}J~;:~:~~::) Select a track/file from a list iPod/iPhone on RC-406). ttl ttl ttl 1 Press Q.. 2Turn the volume knob to make a selection, then press the knob. • AAC/MP3/WMA file: Select the desired folder, then a file. • iPod or KENWOOD Music Editor Light (KME Light)/ KENWOOD Music Control (KMC) file*4: Select the desired file from the list (PLAYLISTS, ARTISTS, ALBUMS, SONGS, PODCASTS*S, GENRES, COMPOSERS*S). ttl ttl ttl*3 ttl*4 ttl*3 • To return to the root folder (or first file), press number button 5 iPod. • To return to the previous hierarchy, press~. • To cancel, press and hold~. USB input terminal . ..... .~::::::"'\ ~~ ~-~II~~ • To skip songs at a specific ratio, press~ I~. (-t 7) ---- ----------------------- --- ----- - - ----- ---- -------------- - -- --·---- Press 5 iPod to select the control mode while in iPod source. MODE ON: From the iPod*l. MODE OFF: From the unit. *1 You can still control play/pause, file selection, fast-forward or reverse files from the unit. ------ --~ ----- -- - -- ------ - ---- - ----- - Press 4 0 repeatedly. • Audio CD: TRACK/TRAC REPEAT, REPEAT OFF • AAC/MP3/WMA file: FILE REPEAT, FOLDER/ FOLD REPEAT, REPEAT OFF • iPod or KME Light/ KMC file: FILE REPEAT, REPEAT OFF Random play Press 3 X: repeatedly. • Audio CD: DISC RANDOM, RANDOM OFF • AAC/MP3/WMA file or iPod or KME Light/ KMC file: FOLDER/ FOLD RANDOM, RANDOM OFF / The source changes to iPod and playback starts. - --- ---- --- --- -------- ---- -- ---------- -- -- -- - ----- - ---- --- -- - Repeat play KCA-iP102 (optional accessory) 6 (or ENT ~II on RC-406). Reverse/Fast-forward Press and hold~ I~ (or~ I~(+) on RC-406). ttl ttl ttl -------------------------------·- ------------·------- ------------------·--------------- ----- ---- ------------------ ---- ------------ ---------------------- ---------------- ---- The source changes to USB and playback starts. .. ......... . . ... ~II Press and hold 3 X: to select ALL RANDOM." 11 *2 Only for AAC/MP3/WMA files. *3 Applicable only when [MODE OFF] is selected. *4 Only for files registered in the database created with KME Light/ KMC. (-t16) *S Only for iPod. CD I USB I iPod AUX --------------------------------Preparation: Select [ON] for [BUILT-IN AUX] I [BUILTIN AUX]. (-+ 4) 1 Press DIRECT. 2 Press the number buttons to enter a track/file number. 3 Press~ I~(+) to search for music. • To cancel, press~. • Not available if Random Play is selected. • Not applicable for iPod, KME Light/ KMC file. (-+16) While listening to iPod ... 1 Press C\. 2 Turn the volume knob to select a category, then press the knob. 3 Press C\ again. 4 Turn the volume knob to select the character to be searched for. 5 Press ~ I ~ to move to the entry position. You can enter up to three characters. 6 Press the volume knob to start searching. 7 Turn the volume knob to make a selection, then press the knob. Repeat step 7 until the desired item is selected. • To search for a character other than A to Z and 0 to 9, enter only"*" . • To return to the previous hierarchy, press~. • To return to the top menu, press number button 5 iPod. • To cancel, press and hold~. 1 2 3 4 5 While listening to iPod or KME Light/ KMC file ... Press the volume knob to enter [FUNGION]. Turn the volume knob to select [SETTINGS], then press the knob. Turn the volume knob to select [SKIP SEARCH], then press the knob . Turn the volume knob to make a selection, then press the knob. O.S% (default)/ 1%/ S%1 10%: Sets the skip ratio when searching for a song. (Holding ~I~ skips songs at 10% regardless of the setting made.) Press and hold~ to exit. Muting upon the reception of a phone call Connect the MUTE wire to your telephone using a commercial telephone accessory.(-+ 21) When a call comes in, "CALL" appears. • The audio system pauses. • To continue listening to the audio system during a call, press~ SRC. "CALL" disappears and the audio system resumes. When the call ends, "CALL" disappears. • The audio system resumes. 1 Connect a portable audio player (commercially available). ~~~IIi~~~ I~~~t jack @) ~ i~•[i[ ~~~:~leaudio 11 3.5 mm (1 /8 stereo mini plug with "L" shaped connector (commercially available) ) 2 Press~ SRC to select AUX. 3 Turn on the portable audio player and start playback. 1 2 3 4 5 While listening to AUX ... Press the volume knob to enter [FUNCTION] . Turn the volume knob to select [SETTINGS], then press the knob. Turn the volume knob to select [AUX NAME SET)/ [AUX NAME], then press the knob . Turn the volume knob to make a selection, then press the knob . AUX (default)/ DVD/ PORTABLE/ GAME/ VIDEO/ TV Press and hold~ to exit. ENGLISH I 7 pan d 0 fa® (for 13•Iil$tf4/13•MI:i..,.1e11l) Preparation: Install the latest version of the Pandora application into your device (iPhone/ iPod touch), then log in and create an account with Pandora. • Select [ON] for [PANDORA SRC]. (-t 4) Preparation: 1 Connect the optional SiriusXM Connect Vehicle Pause or resume playback Press 6 ...,.. .. (or press ENT ...,.. .. on RC-406). Thumbs up or thumbs down Press 1 •12 4.. • If thumbs down is selected, the current track is skipped. 1 Open the Pandora application on your device. 2 Connect your device to the USB input terminal. D Skip a track Create a new station .@) KCA-iP102 / (optional accessory) The source changes to PANDORA and broadcast starts. About Pandora • Pandora is only available in the US. • Because Pandora is a third-party service, the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable. • Some functions of Pandora cannot be operated from this unit. • For issues using the application, please contact Pandora at pa ndora-su pport@pa ndora.com. • If the version of the OS of the connected iPhone is earlier than 4.0, start the Pandora application before selecting the PANDORA source. 8 Expansion port on the rear panel L.c=:::=======l Si ri usXM Connect ~-"'=========1 Vehicle Tuner 2 Activate the subscription through www.siriusxm. 1 Press and hold the volume knob. 2 Turn the volume knob to select [FROM TRACK] or [FROM ARTIST], then press the knob. A new station is created based on the current song or artist. Save a station Search for a registered station Tuner (commercially available). Press and hold number button 3, 4 or 5 to store. • To select a stored station, press the same button (3, 4 or 5). 1 Press Q.. 2 Turn the volume knob to 3 make a selection, then press the knob (or press £./T on RC-406). [BY DATE]: According to the registered date. [A-Z]: Alphabetical order. Turn the volume knob to the desired station, then press the knob. com/activatenow or call 1-866-635-2349. The Radio ID is required to activate the SiriusXM Connect Vehicle Tuner. The Radio ID is located on the label of the SiriusXM Connect Vehicle Tuner and can also be shown on the unit's display window when you select "Channel 0" after SiriusXM Connect Vehicle Tuner is connected. 3 Press C) SRC to select SIRIUS XM to start updating. 1 Press(.!) SRC to select SIRIUS XM. 2 Press Q. repeatedly to select a band. 3 Press and hold Q.. 4 Turn the volume knob to select a category, then 5 press the knob. If "ALL CHANNEL" is selected, all the available channels will be shown. Turn the volume knob to select a channel, then press the knob. (or) Press~ I~ to search for a channel manually. • Pressing and holding ~I~ changes the channel rapidly. SiriusXM™ If a locked channel or a mature channel ([MATURE CH] is set to [ON]) is selected, a pass code input screen appears. Enter the pass code to receive the channel. Default XX • To store a channel of the current band: Press and hold one of the number buttons (1 to 6). • To select a stored channel of the current band: Press one of the number buttons (1 to 6) OJ CODE SET Turn the volume knob to select a number. [I] Press ~ I~ to move to the entry position. W Repeat steps OJ and Wto enter a new 4-digit pass code. [!] Press the volume knob to confirm. [[] Repeat steps OJ to[!] to reconfirm the pass code . • Make a note of the new pass code to enter channel lock settings from next time. Press~ (or~ on RC-406). Replay starts from the live position (and "~(!)" lights up for 13•III!Jetr4). CHANNEL EDIT/ CH EDIT* OJ During Replay... • To pause or resume playback, press 6 ~II (or ENT ~II on RC-406). • To skip the current song backward/forward, press~ I~ (or~ I~(+) on RC-406). • To rewind/fast-forward, press and hold~ I~ (or~ I~(+) on RC-406). • To exit from Replay and go to live, press~ (or~ on RC-406). Turn the volume knob to select a category, then press the knob. [I] Turn the volume knob to select a channel you want to lock, then press the· knob. "L" appears in front of the channel number. W Press ~ to exit. CHANNEL CLEAR/ CH CLEAR* YES: Clears all the locked channels. ; NO: Cancels. MATURECH ON: Turns on the Sirius XM-defined lock setting (mature channel).; OFF: Turns off. • If [ON] is selected, your setting (CHANNEL EDIT/ CH EDIT) is temporary ignored. 1 Press DIRECT to enter Direct Access Tuning. 2 Press the number buttons to enter a channel number, then press ~I~(+) to start searching. • To cancel, press~ or DIRECT. 1 Press the volume knob to enter [FUNGION]. 2 Turn the volume knob to select [SETTINGS], then press the knob. 3 Turn the volume knob to make a selection (see the following table), then press the knob. 4 Press and hold ~ to exit. Default XX SEEK MODE SIGNAL LEVEL/ SIGNAL LVL NO SIGNAL/ WEAK/ GOOD/ STRONG: Shows the strength of the current received signal. ------------------------------------------------------------------------------------------------------ BUFFER USAGE/ BUF USAGE 0%-100% (~):Shows the memory usage for Replay buffer. * Displayed only when [MATURE CH] is set to [Off]. Selects the tuning method for the~ I~ buttons. CHANNEL: Manually search for a channel.; PRESET: Search for a preset channel of the selected band. ENGLISH I 9 BLUETOOTH® You can operate Bluetooth devices using this unit. MIC (Microphone input term:y:hone (supplied) Rear panel Secure using cord clamps (not supplied) if necessary. Adjust the microphone angle If you turn off the unit or detach the control panel during a phone call conversation, the Bluetooth connection is disconnected. Continue the conversation using your mobile phone. Supported Bluetooth profiles Hands-Free Profile (HFP) I Serial Port Profile (SPP) I Phonebook Access Profile (PBAP) I Object Push Profile (OPP) I Advanced Audio Distribution Profile (A2DP) I AudioNideo Remote Control Profile (AVRCP) When connecting a Bluetooth device to the unit for the first time, perform pairing between the unit and the device. Once the pairing is completed, the Bluetooth device will remain registered in the unit even if you reset the unit. • Up to five devices can be registered (paired) in total. • A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any time. 10 • This unit supports Secure Simple Pairing (SSP). • Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the device to the unit manually. Refer to the instruction manual of the Bluetooth device for more information. 1 Press C!> SRC to turn on the unit. 2 Search and select this unit model name (KDC-XS**/ KDC-BTS**U/ KDC-BT3**U) on the Bluetooth device. "PAIRING"-+ "PASS XXXXXX" .. Device name-+ "PRESS"-+ "VOLUME KNOB" scrolls on the display. 3 Press the volume knob to start pairing. "PAIRING OK" appears when pairing is completed and "BT" will light up when the Bluetooth connection is established. • For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN) code immediately after searching. • Pairing request (via Bluetooth) is automatically activated if an iPhone/iPod touch is connected through the USB input terminal. (Applicable only if [AUTO PAIRING]/ [AUTO PAIR] is set to [ON].) (... 12) Press the volume knob to pair once you have confirm the passcode. You can check the connectivity of the supported profile between the Bluetooth device and the unit. 1 Press~ to enter Bluetooth mode. 2 Turn the volume knob to select [BT TEST MODE]/ [BT TEST], then press the knob. "PLEASE PAIR YOUR PHONE" appears. 3 Search and select this unit model name (KDC-XS**/ KDC-BTS**U/ KDC-BT3**U) on the Bluetooth device. 4 Press the volume knob to start pairing and begin the test mode. "PAIRING" flashes on the display. The connectivity result (OK or NG) appears after the test. PAIRING: Pairing status HF CNT: Hands-Free Profile (HFP) compatibility AUD CNT: Advanced Audio Distribution Profile (A2DP) compatibility PB DL: Phonebook Access profile (PBAP) compatibility • To cancel, press~. BLUETOOTH• Bluetooth mobile phone Receive a call Press~ or the volume knob or one of the number buttons (1 to 6) (or~ on RC-406). • The~ button illuminates and flashes in green (for 13•11U1W/ l:oXtll:i,..,..,.111) or flashes in red (for 13•Itll:ii~.,.11J) when there is an incoming call. During a call, the button illuminates in red. • When [AUTO ANSWER] is set to the selected time, the unit answers incoming call automatically.(-+ 12) Reject an incoming call Press~ SRC (or.-- on RC-406). End a call Press~ or~ SRC (or.-- on RC-406). Switch between hands-free and private talk modes Press 6 ..,.II during a call. • Operations may vary according to the connected Bluetooth device. Adjust the phone volume Turn the volume knob during a call. Phone volume: [00] to [35] (Default: [15]) • This adjustment will not affect the volume of the other sources. Switch between two connected phones 1 Press~ to enter Bluetooth mode. 2 Press and hold~ to switch between the two connected phones ([MAIN]/ [SUB]). 1 Press~ to enter Bluetooth mode. 2 Turn the volume knob to make a selection (see the following table), then press the knob. Repeat step 2 until the desired item is selected. • To return to the previous hierarchy, press~. • To cancel, press~. PHONE BOOK OJ Turn the volume knob to select a name, then press the knob. [l] Turn the volume knob to select a phone number, then press the knob to call. • To return to the previous hierarchy, press~. • If the phone supports PBAP, the phonebook of the connected phone is automatically transferred to the unit when pairing. lfthe phone does not support PBAP, "NO DATA" appears. Transfer the phonebook manually. (-+ 12, TRANSFER PB) • Contacts are categorized as: GE (general), HM (home), OF (office), MO (mobile), OT (others). • This unit can display only non-accent letters. (Accent letters such as "U" is showns as "U".) • lfthe phonebook contains many contacts, use Alphabet Search. (-+12) CALL HISTORY/ HISTORY NUMBER DIAL OJ Turn the volume knob to select a name or a phone number. • "I" indicates call received, "0" indicates call made, "M" indicates call missed. • Press SCRL DISP to change the display information (name or phone number). • "NO DATA" appears ifthere is no recorded call history. [l] Press the volume knob to call. OJ Turn the volume knob to select a number (0 to 9) or character(*,#,+). [l] Press~ I~ to move the entry position. Repeat steps OJ and [l] until you finish entering the phone number. W Press the volume knob to call. When the phone receives a text message, the unit rings and "SMS RECEIVED" or "NEW SMS" appears. • You cannot read, edit, or send a message through the unit. • To clear the message, press any button. (or using RC-406) OJ Press the number buttons (0 to 9) to enter the phone number. [l] Press~ to call. DVC PRIORITY/ DVC PRI MAIN-XXX/ SUB-XXX: To view which device is connected as MAIN and which is connected as SUB. ENGLISH I 11 BLUETOOTH• Default: XX PAIRING PHONE SELEOI PHONESEL Select the phone or audio device to connect or disconnect. ------------------------ AUDIO SELEO/ AUDIO SEL DEVICE DELETE/ DVC DELETE [I] Turn the volume knob to select a device to delete, then press the knob. [I] Turn the volume knob to select [YES] or [NO], then press the knob. TRANSFER PB* : "DL PB ***"appears and transfer the phonebook of the connected phone to this unit manually. DETAILED SET/ DETAIL SET PIN CODE EDIT/ PIN EDIT (0000) Changes the PIN code (up to 8 digits). [I] Turn the volume knob to select a number. [I] Press~ I~ to move the entry position. Repeat steps [I] and [I] until you finish entering the PIN code. [I] Press the volume knob to confirm. AUTO ANSWER 1 - 99 (8): The unit answers incoming calls automatically in the selected time.; OFF: Cancels. RECONNEa ON: The unit automatically reconnect when the Bluetooth device is within range.; OFF: Cancels. AUTO PAIRING/ AUTO PAIR ON: The unit automatically pair supported Bluetooth device (iPhone/iPod touch) when it is connected through USB input terminal. Depending on the iOS version of the connected iPhone/iPod touch, this function may not work. ; OFF: Cancels. --- - - ----- ------ ---- - - -- ---- - ------ -- -- ----- ----------- --- -- - - ------------- · BT HF/AUDIO FRONT: Ouputs audio from the front left and right speakers.; ALL: Outputs audio from all the speakers. CALL BEEP ON: The unit beeps when there is an incoming call.; OFF: Cancels. BT F/W UPDATE/ BT UPDATE BT F/W XX.XX: YES: Updates all the Bluetooth settings (including stored pairing, phonebook, and etc.). ; NO: Cancels. MICGAIN -20- +8 (Q): The sensitivity of the microphone increases as the number ----------------------- -------- - -- --------------------- -------------------------------------------- increased. ECHO LEVEL 1 -10 (~) : Adjust the echo cancellation delay time until the least echo is being heard during a phone conversation. * Selectable only when the connected phone supports OPP. 12 You can search through the contacts quickly according to the first letter (A to Z), number (0 to 9), or symbol. • The second alphabet of the contact will be searched if the first alphabet does not exist. 1 Press~ to enter Bluetooth mode. 2 Turn the volume knob to select [PHONE BOOK], then press the knob. 3 Press~ to enter alphabet search mode. The first menu (ABCDEFGHIJK) appears. To go to the other menu (LMNOPQRSTUV or WXYZl *),press~ I~- 4 Turn the volume knob to select the desired first letter, then press the knob. • To search with numbers, select "1 ". • To search with symbols, select"*"· 5 Turn the volume knob to select a name, then press the knob. 6 Turn the volume knob to select a phone number, then press the knob to call. • To return to the previous hierarchy, press~• Contacts are categorized as: GE (general), HM (home), OF (office), MO (mobile), OT (others). • This unit can display only non-accent letters. (Accent letters such as "U" is shown as "U".) BLUETOOTH• Bluetooth audio player 1 Press and hold ~. 2 Speak the name of the contact you want to call or the voice command to control the phone functions. Operations and display indications may differ according to their availability on the connected device. • Supported Voice Recognition features vary for each phone. Refer to the instruction manual of the connected phone for details. • This unit also supports the intelligent personal assistant function of iPhone. Playback 1 Press C!> SRC (or SRC on RC-406) to select BTAUDIO. 2 Operate the Bluetooth audio player to start playback. Pause or resume playback Press 6 ...,.. .. (or ENT ...,.. .. on RC-406). Select group or folder Press 1-12 +(or *AM- 1 #FM+ on RC-406). --------------------------------------------------------- -------------------------· You can store up to 6 contacts. 1 Press~ to enter Bluetooth mode. 2 Turn the volume knob to select [PHONE BOOK], [HISTORY], or [NUMBER DIAL], then press the knob. 3 Turn the volume knob to select a contact or enter a phone number. 4 Press and hold one of the number buttons (1 to 6). ''STORED" appears when the contact is stored. • To erase a contact from the preset memory, select [NUMBER DIAL] in step 2 and store a blank number. ~---------------------------------------- -------------------------------------- Reverse/forward skip Press~ I~ (or~ 1 ~(+)on RC-406). Reverse/fast-forward Press and hold~ I~ (or~ I~(+) on RC-406). Repeat play Press 4 0 repeatedly to make a selection. FILE REPEAT, ALL REPEAT, REPEAT OFF Random play Press 3 X:: repeatedly to make a selection. FOLDER/ FOLD RANDOM, RANDOM OFF Press and hold 3 X:: to select "ALL RANDOM." 1 Press ~ to enter Bluetooth mode. 2 Press one of the number buttons (1 to 6). 3 Press~ or the volume knob to call. "NO MEMORY" appears if there are no contacts stored. You can listen to Pandora on your smart phone (Android OS or RIM OS) through Bluetooth on this unit. 1 Open the Pandora application on your device. 2 Connect to Bluetooth audio player. (-+10, 12) 3 Press C!> SRC to select PANDORA. The source switches and broadcast starts automatically. • You can operate Pandora in the same way as Pandora for iPod/iPhone. (-+ 8) ENGLISH I 13 AUDIO SETTINGS While listening to any source ... 1 Press the volume knob to enter [FUNGION]. 2 Turn the volume knob to select [AUDIO CONTROL]/ [AUDIO GRL], then press the knob. 3 Turn the volume knob to make a selection (see the following table), then press the knob. Repeat step 3 until the desired item is selected or activated. 4 Press and hold~ to exit. PRESET EQ NATURAU USER/ ROCK/ POPS/ EASY/TOP40/ JAW POWERFUL: Selects a preset equalizer suitable to the music genre. (Select [USER] to use the customized bass, middle, and treble settings.) BASS BOOST B.BOOST LV1/ B.BOOST LV2/ B.BOOST LV3: Selects your preferred bass boost level.; OFF: Cancels. LOUDNESS LOUDNESS LV1/ LOUD LV1/ LOUDNESS LV2/ LOUD LV2: Selects your preferred low and high frequencies boost to produce a well-balanced sound at a low volume level.; OFF: Cancels. BALANCE L15 to R15 (0): Adjusts the left and right speaker output balance. FADER R15 to F15 (0): Adjusts the rear and front speaker output balance. SUBWOOFER SETI SUB-W SET ON: Turns on the subwoofer output.; OFF: Cancels. (orusingRC-406)~~~~~~~~~~~~~~~~~~~~ 1 2 Press AUD to enter [AUDIO CONTROL]/ [AUDIO GRL]. Press JJrt../T to make a selection, then press ENT ........ • To return to the previous hierarchy, press~. Default: XX SUB-W LEVEL -15 to+ 15 (0): Adjusts the subwoofer output level. BASS LEVEL -8 to +8 (0): -MIDLEVEL--------=_ t~ +B(m:____ Adju.sts the le~el to memorize for each source. (Before . 8 -------------------------=------- makmg an adjustment, select the source you want to adjust.) TRE LEVEL -8 to +8 (0): BASS ADJUST BASS GR FRQ HPF THROUGH: All signals are sent to the speakers.; 100HZ/ 120HZ/ 150HZ: Audio signals with frequencies higher than 100 Hz/ 120 Hz/ 150Hz are sent to the speakers. LPF SUBWOOFER/ LPF SUB-W THROUGH: All signals are sent to the subwoofer.; 85HZ/ 120HZ/ 160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/ 160 Hz are sent to the subwoofer. SUB-W PHASE REVERSE/ REV (180°)/ NORMAL/ NORM (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [THROUGH] is selected for [LPF SUBWOOFER]/ [LPF SUB-W].) SUPREME SET ON: Creates realistic sound by interpolating the high-frequency components that are lost in MP3/WMA audio compression.; OFF: Cancels. (Selectable only when playing back an MP3/WMA disc or a USB device, except iPhone/iPod.) VOLUME OFFSET/ VOL OFFSET (Default: 0) -8 to +8 (for AUX); -8 to 0 (for other sources): Presets the volume adjustment level of each source. (Before adjustment, select the source you want to adjust.) 60/80/ 100/200: Selects the center frequency. -------------------------------------------~ BASS LEVEL -8 to +8 (0): Adjusts the level. BASS QFACTOR 1.00/1.25/1.50/2.00: Adjusts the quality factor. BASS EXTEND ON: Turns on the extended bass. ; OFF: Cancels. MID GR FRQ 0.5K/1.0K/1.5K/2.5K: Selects the center frequency. MID LEVEL -8 to +8 (0): Adjusts the level. MID QFAGOR 0.75/1.00/1.25: Adjusts the quality factor. TRE GR FRQ 1O.OK/12.5K/15.0K/17 .5K: Selects the center frequency. TRE LEVEL -8 to +8 (0): Adjusts the level. ------------------------------------------------------------------------- MID ADJUST TRE ADJUST 14 ---------------------------------------------------------- • 13•IIJI:iite1;.111: [SUB-W LEVEL]/ [SUB-W SET]/ [LPF SUB-W]/ [SUB-W PHASE] is selectable only if [SWITCH PRE] is set to [SUB-W]. (~ 4) • [SUB-W LEVEL]/ [LPF SUB-W]/ [SUB-W PHASE] is selectable only if [SUB-W SET] is set to [ON]. DISPLAY SETTINGS 1 Press the volume knob to enter [FUNGION]. 2 Turn the volume knob to select [SETTINGS], then press the knob. 3 Turn the volume knob to make a selection (see the following table), then press the knob. DISP DIMMER ON: Dims the display illumination.; OFF: Cancels. TEXT SCROLL AUTO/ ONCE: Selects whether to scroll the display information automatically, or scroll only once.; OFF: Cancels. BT DVC STATUS (See the table on the left column.) Repeat step 3 until the desired item is selected or activated. 4 Press and hold~ to exit. • To return to the previous hierarchy, press~. Default: XX COLOR SELEaI COLORSEL VARIABLE SCAN/VARISCAN/ COLOR 01 -COLOR 24/ USER: Selects your preferred key illumination color. You can create your own color (when [COLOR 01]- [COLOR 24] or [USER] is selected). The color you have created can be selected when you select [USER]. [] Press and hold the volume knob to enter the detailed color adjustment. W Press ~I~ to select the color (R/ G/ B) to adjust. [}] Turn the volume knob to adjust the level (0- 9), then press the knob. DISPDIMMER ON: Dims the display illumination.; OFF: Cancels. TEXT SCROLL AUTO/ ONCE: Selects whether to scroll the display information automatically, or scroll only once.; OFF: Cancels. KEY DIMMER DIMMER LV1: Dims the key illumination.; DIMMER LV2: Dims the key illumination darker than DIMMER LV1.; DIMMER OFF: Cancels. BTDVC STATUS/ DVCSTATUS HF-CON 1/2/1/: Shows the connection status of the Bluetooth device.; NO: No connection. AD-CON YES: An Bluetooth audio is connected.; NO: No connection. BATT FULL/ MID/ LOW: Shows the battery level of the Bluetooth device.; ---: No information. SIGNAL MAX/ MID/ LOW/ NO SIGNAL: Shows the signal strength of the Bluetooth device.;---: No information. ENGLISH I 15 MORE INFORMATION General • This unit can only play the following CDs: cOJD§@ cOJo§@ cOJD§@ &'ilm ~ ·······~ • Detailed information and notes about the playable audio files are stated in an online manual on the DIOITALAUDIO following site: www.kenwood.com/cs/ce/audiofile/ Playable files • Playable Audio file: AAC (.m4a), MP3 (.mp3), WMA (.wma) • Playable disc media: CD-R/RW /ROM • Playable disc file formats: ISO 9660 Levell /2, Joliet, Romeo, Long file name. • Playable USB device file system: FA T16, FAT32 Although the audio files are complied with the standards listed above, playback maybe impossible depending on the types or conditions of media or device. Unplayable discs • Discs that are not round. • Discs with coloring on the recording surface or discs that are dirty. • Recordable/ReWritable discs that have not been finalized. • 8 em CD. Attempting to insert using an adapter may cause malfunction. About USB devices • This unit can play AAC/MP3/WMA files stored on a USB mass storage class device. • You cannot connect a USB device via a USB hub and Multi Card Reader. • Connecting a cable whose total length is longer than 5 m may result in abnormal playback. • This unit cannot recognize a USB device whose rating is other than 5 Vand exceeds 1 A. 16 About iPod/iPhone Made for - iPod touch (1st, 2nd, 3rd, and 4th generation) - iPod classic - iPod with video - iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation) - iPhone, iPhone 3G, 3GS, 4, 4S • For the latest compatible list and software versions of iPhone/iPod, see: www.kenwood.com/cs/ce/ipod • If you start playback after connecting the iPod, the music that has been played by the iPod is played first. In this case, "RESUMING" is displayed without displaying afolder name, etc. Changing the browse item will display the correct title, etc. • You cannot operate iPod if"KENWOOD" or "t/" is displayed on iPod. About Bluetooth • Depending on the Bluetooth version of the device, some Bluetooth devices may not be able to connect to this unit. • This unit may not work with some Bluetooth devices . • Signal conditions vary, depending on the surroundings . • For more information about Bluetooth, visit the following website: www.kenwood.com/cs/ce/ About KENWOOD Music Editor Light and KENWOOD Music Control • This unit supports the PC application KENWOOD Music Editor Light and Android™ application KENWOOD Music Control. • When you play audio files with song data added using the KENWOOD Music Editor Light or KENWOOD Music Control, you can search for audio files by Genres, Artists, Albums, Playlists, and Songs . • KENWOOD Music Editor Light and KENWOOD Music Control are available from the following web site: www.kenwood.com/cs/ce/ TROUBLESHOOTING Sound cannot be heard. "PROTECT" appears and no operations can be done. • Adjust the volume to the optimum level. • Check the cords and connections. Check to be sure the terminals of the speaker wires are insulated properly, then reset the unit. If this does not solve the problem, consult your nearest service center. "NO MUSIC" appears. Connect a USB device that contains playable audio files. "NA DEVICE" appears. Connect a supported USB device, and check the connections. "USBERROR"appea~. • Remove the USB device, turn the unit off, then turn it on again. • Try to connect another USB device . "iPod ERROR" appears. • ReconnecttheiPod. • Reset the iPod. ~-------------------------------------------------------------------------------------------------------------------------------------- • Sound cannot be heard. • The unit does not turn on. • Information shown on the display is incorrect. The unit does not work at all. • Radio reception is poor. • Static noise while listening to the radio. "NA FilE" appears. Clean the connectors.(~ 2} Reset the unit.(~ 3} • Connect the antenna firmly. • Pull the antenna out all the way. Make sure the media contains supported audio files. 16} (~ "NO DISC" appears. Insert a playable disc into the loading slot. "TOC ERROR" appears. Make sure the disc is clean and inserted properly. "PlEASE EJECT" I "PlS EJECT" appears. Reset the unit. If this does not solve the problem, consult your nearest service center. ------------------------------------------------------------- ---------------------------- Noise is generated. Skip to another track or change the disc. -------~--------------------------------------------~-----------------------------------~-------- Tracks do not play back as you have intended them to play. Playback order is determined when files are recorded. "READING" keeps flashing. Do not use too many hierarchical levels or folders. Elapsed playing time is not correct. This is caused by how the tracks are recorded. The number of songs contained in the /ISONGS" category of this unit is different from the iPod/iPhone. Podcast files are not counted on this unit as this unit does not support the playback of pod cast files. Correct characters are not displayed (e.g. album name). This unit can only display uppercase letters, numbers, and a limited number of symbols. ------------------------------------------------------------------- -----------------------------· --------------------------------------------------- ----------------------- -------------------------------------------------------------------------·------------------------------~ Disc cannot be ejected. Press and hold~ to forcibly eject the disc. Be careful not to drop the disc when it is ejected. If this does not solve the problem, reset the unit.(~ 3} "READERROR"appea~. Copy the files and folders onto the USB device again. If this does not solve the problem, reset the USB device or use another USB device. "NO DEVICE" appears. Connect a USB device, and change the source to USB again. --------------------------------------------------------------------------------------------------------~ "COPY PRO" appears. A copy-protected file is played. ENGLISH I 17 TROUBLESHOOTING ADD ERROR"I ADD ERR" • "SEARCH ERROR"I "SEARCH ERR" New station creation is unsuccessful. No Bluetooth device is detected. • Search from the Bluetooth device again. • Reset the unit.(-+ 3) "CHECK DEVICE"I "CHK DEVICE" Check the Pandora application on your device. Pairing cannot be made. ..."' "NO SKIPS" The skip limit has been reached. c::: "NO STATIONS" No station is found. • Make sure you have entered the same PIN code to both the unit and Bluetooth device. • Delete pairing information from both the unit and the Bluetooth device, then perform pairing again. "STATION liMIT"/ "STATION liM" The number of registered stations has reached its limit. Retry after deleting an unnecessary station on your device. "UPGRADE APP" Make sure you have installed the latest version of the Pandora application on your device. "CH LOCKED" The selected channel is locked. Enter the correct pass code to unlock.(-+ 9) • II II 0 ""C "' 0... "CHAN UNSUB" ! ~ X '"DEVICE FULL" appears. 1 ::s .i:: Echo or noise occurs. • Adjust the microphone unit's position.(-+ 10) • Check the [ECHO LEVEL] setting.(-+ 12) Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth device. • Move the car to a place where you can get a better signal reception. The selected channel is unsubscribed. Calll-866-635-2349 to subscribe. ® "CHAN UNAVAIL" The selected channel is unavailable. .S QJ "CHECK ANTENNA"I "CHK ANTENNA" Check the antenna and its connection are in good condition. ~~------------·----------------------------·--·---~~-------~--------- "CHECK TUNER" Make sure the SiriusXM Connect Vehicle Tuner is connected to the unit. I "NO SIGNAL" Make sure the antenna is mounted outside the vehicle. I "SUBSCRIPTION UPDATED- ENTER TO CONTINUE." I "SUBSCRIPTN UPDATED- ENTER TO CONTINUE." Your subscription is updated. Press the volume knob to continue. "WRONG CODE" Make sure you have entered the correct pass code.(-+ 9) I Voice calling method is ~ I not successful. ::s V\ v; • Use voice calling method in a more quiet environment. • Reduce the distance from the microphone when you speak the name. • Make sure the same voice as the registered voice tag is used. "NOT SUPPORT" appears. The connected phone does not support Voice Recognition feature. "ERROR" appears. Try the operation again. If "ERROR" appears again, check if the device supports the function you have tried. Sound is being interrupted or skipped during playback of a Bluetooth audio player. • Reduce the distance between the unit and the Bluetooth audio player. • Turn off, then turn on the unit and try to connect again. • Other Bluetooth devices might be trying to connect to the unit. The connected Bluetooth audio player cannot be controlled. • Check whether the connected Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP). (Refer to the instructions of your audio player.) • Disconnect and connect the Bluetooth player again. "HF ERROR" appears. 18 The number of registered devices has reached its limit. Retry after deleting an unnecessary device. Reset the unit and try the operation again. If this does not solve the problem, consult your nearest service center. SPECIFICATIONS FM Frequency Range •:olll$tr4/ 13•M=iieie1e11J: Version Bluetooth Ver.2.1 +EDR Certified 87.9 MHz to 107.9 MHz (200kHz space) Frequency Range 2.402 GHz to 2.480 GHz Output Power +4 dBm (MAX), 0 dBm (AVE) Power Class Maximum Communication Range Line of sight approx. 10 m (32.8 ft) Profile HFP (Hands-Free Profile) SPP (Serial Port Profile) PBAP (Phonebook Access Profile) OPP (Object Push Profile) A2DP (Advanced Audio Distribution Profile) AVRCP (Audio/Video Remote Control Profile) Maximum Output Power 50Wx4 Full Bandwidth Power 22 W x 4 (at less than 1 % THD) 13•M=iite1e11J: 87.5 MHz to 108.0 MHz (50 kHz space) ---------------------------------------------------------------------------------------------------------------- Usable Sensitivity (SIN= 26 dB) 11.2 dBf (1.0 ~V /75 0) ----------------------------------------------------------------------------------·-------------Quieting Sensitivity 19.2 dBf (2.5 ~V /75 0) (DIN S/N = 46 dB) Frequency Response (±3 dB) 30 Hz to 15 kHz Signal-to-Noise Ratio (MONO) 63 dB Stereo Separation (1 kHz) 40 dB Frequency Range 530 kHz to 1 700kHz (10kHz space) Usable Sensitivity (S/N = 20 dB) 31 ----------------------------------------------------------------------------------- AM ------------------------------------------------------------------------dB~ (36 ~V) Laser Diode GaAIAs Speaker Impedance 4 0 to 8 0 Digital Filter (D/A) 8 times over sampling Tone Action Bass 100Hz ±8 dB D/A Converter 24 Bit Middle 1 kHz ±8 dB Spindle Speed 500 rpm to 200 rpm (CLV) Treble 12.5 kHz ±8 dB Wow &Flutter Below measurable limit Frequency Response (± 1 dB) 20 Hz to 20 kHz Total Harmonic Distortion (1 kHz) 0.01% Preout Level I Load (CD) t:oXtA$tH: 4 000 mV/10 kO l~olte:iie1e1e1IJ/ 13•M=iite1e11J: 2 500 mV/10 kO Preout Impedance ~ Frequency Response (±3 dB) 20 Hz to 20 kHz 6000 Signal-to-Noise Ratio (1 kHz) Dynamic Range 90 dB Input Maximum Voltage 1 200 mV AAC Decode AAC -LC ".m4a" files Input Impedance 10 kO MP3 Decode Compliant with MPEG-1/2 Audio Layer-3 Operating Voltage 14.4 V (10.5 Vto 16 Vallowable) WMA Decode Compliant with Windows Media Audio Maximum Current Consumption 10 A USB Standard USB 1.1, USB 2.0 (Full speed) Installation Size (W x H x D) Maximum Supply Current DC 5 V== 1 A 182 mm x 53 mm x 160 mm (7-3/16 X 2-1/8 X 6-5/16 File System FAT16/ 32 AAC Decode AAC -LC ".m4a" files MP3 Decode Compliant with MPEG-1 /2 Audio Layer-3 WMA Decode Compliant with Windows Media Audio 11 Weight 11 11 ) 2.91bs (1.3 kg) Subject to change without notice. ENGLISH I 19 z lnstallating the unit (in-dash mounting) -u 0 1 1- w z z 0 u ............ z -cc 0 I- Bend the appropriate tabs to hold the mounting sleeve firmly in place . .... .... cc 1"'z When installing without the mounting sleeve 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with the supplied screws. - @ @ @@ /I ~T!J 05mm How to remove the unit Basic procedure 1 Detach the faceplate. 1 Remove the key from the ignition switch, then 2 disconnect thee terminal of the car battery. 2 Connect the wires properly. See Wiring connection.(~ 21) 3 Install the unit to your car. See Installing the unit (in-dash mounting). 4 Connect the 8 terminal of the car battery. 5 Reset the unit.(~ 3) 20 Fit the catch pin on the extraction keys into the holes on both sides of the trim plate, then pull it out. 3 Insert the extraction keys deeply into the slots on each side, then follow the arrows as shown on the right. @ ;/ 8 mm ----8 mm _MAX. __ _l_MAX. ~G 05mm Wiring connection Part list for installation [Ti;f!l:iit:tiif"mmomnonnooooonnmmo•moooTUi~I!J!tiffmnmo;@m(®)os~b~~~f~~-~-~~~-~-~nonoomoommmnn•~ ! MIC (Microphone input terminal) (-+ 10) jl~ ~ !ltottJ:i ..1e1e11J ., ! ~@ @ Front output ~~ ~ Front output ! 1 ® ! ! ~~ ~ Rear/subwoofer output ! ~ @Rear output ! .. ..................................................................................................................... ................................................................................................................................................................................................................................. '........ -' ~ Fuse (10 A) ® Faceplate ~ ( x1 ) Mounting sleeve 13•111$1!14/ 13•M:i ..1e1e11J: To the optional SiriusXM Connect Vehicle Tuner (commercially available) (-+ 8) Antenna terminal White To front speaker (left) ( x1 ) If no connections are made, do not let the wire come out from the tab. - > - - -White/Black ----- © Light blue/yellow Trim plate To the steering wheel remote control adapter (Steering remote control wire) ( x1 ) @ Wiring harness Green To rear speaker (left) Green/Black ->-------- To the power control terminal when using the optiorreJ power amplifier, or to the antenna control terminal in the vehicle. Blue/White (Power control wire) ( x1 ) Pu le To rear speaker (right) Purple/Black -~------~------ Brown (Mute control wire) :...l Ignition switch To the terminal that is grounded when either the telephone rings or during conversation. (To connect the Kenwood navigation system, refer your navigation manual.) Car fuse box ® ( x2) ® Red Extraction key Flat head screw (Ignition wire) Yellow ( x4) Blue .-------------~----------------~----~ (Battery wire) Black (Ground wire) Battery (Not used) @ Round head screw ( x4) To the metallic body or chassis of the car ENGLISH I 21 CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. JVC KENWOOD Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFAGURE. Location : Top Plate FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmfvl interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. FCC NOTE This equipment has been tested and found to comply with thelimits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in aparticular installation.lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on acircuit different from that to which the ' receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. • "Made for iPod," and "Made for iPhone" mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. • iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. • Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc., used with permission. • Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. All rights reserved. • The" AAC" logo is atrademark of Dolby Laboratories. • Android is trademark of Google Inc. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners. IC (Industry Canada) Notice This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The term "IC: "before the certification/ registration number only signifies that the Industry Canada technical specification were met. Informacion acerca de Ia eliminacion de equipos eh!ctricos yelectronicos al final de Ia vida util (aplicable a los paises que hayan adoptado sistemas independientes de recogida de residuos) CAUTION This equipment complies with FCC/I( radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement Cto OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person's body (excluding extremities: hands, wrists, feet and ankles). Under Industry Canada regulations, this radio transmitter may only operate using an antenna of atype and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Los productos con el slmbolo de un contenedor con ruedas tachado no pod ran ser desechados como residuos domesticos. Los equipos electricos yelectr6nicos al final de Ia vida uti I, deberan ser reciclados en instalaciones que puedan dar el tratamiento adecuado aestos productos y asus subproductos residuales correspondientes. P6ngase en contacto con su administraci6n local para obtener informacion sobre el punto de recogida mas cercano. Un tratamiento correcto del reciclaje y Ia eliminaci6n de residuos ayuda aconservar los recursos y evita al mismo tiempo efectos perjudiciales en Ia salud yel medio ambiente. Para cumplimiento de Ia COFETEL: "La operaci6n de este equipo esta sujeta alas siguientes dos condiciones: (1) es posible que este equipo odispositivo no cause interferencia perjudicial y (2) este equipo odispositivo debe aceptar cualquier interferencia, incluyendo Ia que pueda causar su operaci6n no deseada" Note de IC (lndustrie Canada) Le present appareil est conforme aux CNR d'lndustrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement. L'expression "IC:" avant le numero d'homologation/ enregistrement signifie seulement que les specifications techniques d'lndustrie Canada ont ete respectees. ATTENTION Cet equipement est conforme aux limites d'exposition aux rayonnements enoncees pour un environnement non contr61e et respecte les regles d' exposition aux frequences radioelectriques (RF) CNR-102 de I'IC. Cet equipement emet une energie RF tres faible qui est consideree conforme sans evaluation de !'exposition maxi male autorisee. Cependant, cet equipement doit etre installe et utilise en gardant une distance de 20 em ou plus entre le dispositif rayonnant et le corps (a I'exception des extremites: mains, poignets, pieds et chevilles). Conformement a Ia reg Iem entation d'lndustrie Canada, le present emetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inferieur) approuve pour l'emetteur par lndustrie Canada. Dans le but de reduire les risques de brouillage radioelectrique a!'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que Ia puissance isotrope rayon nee equivalente (p.i.r.e.) ne depasse pas l'intensite necessaire al'etablissement d'une communication satisfaisante. • Contains Bluetooth Module FCC ID: XQN-BTR60X • Contains Bluetooth Module IC: 9688A-BTR601 MILITARY Units purchased through the U.S.A. military exchange service overseas may be serviced under warranty in the continental U.S.A.. subject to lhe !allowing conditions. 1) The original warranty is in effect. 2) Proof of purchase is provided to lhe servicer. WARRANTY FOR MILITARY MARKET Kenwood corporation is proud ofthe quality and workmanship of itsaudio equipment. Thisunit has been properly designed, tested and inspected before II was shipped to you. If properly installed and operated inaccordance wilh inslruct~ns furnished, il should give yoo an optimum reliable pertormance. WARRANTY PERIOD This product iswarranted lor aperiod of (1) year from lhe dale of the original purchase. SCOPE OF WARRANTY Except as specified below, lhis warranty covers all defects in materials and workmanship of the Kenwood brand products During the warranty period, any authorized Kenwood Service Center in the military market listed in the back of this warranty card will provide you free-of-charge bolh parts and labor required to correct any defect in materials or wort
Source Exif Data:File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : JOSHN Create Date : 2013:01:31 12:17:24-05:00 Keywords : 113KDCX597;, Kenwood, Excelon, KDC-X597;, KDC-X597;, KDCX597;, WWW.CRUTCHFIELD.COM; Modify Date : 2013:01:31 12:34:17-05:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2013:01:31 12:34:17-05:00 Creator Tool : Adobe Acrobat 10.1.4 Format : application/pdf Title : 113KDCX597 Creator : JOSHN Subject : 113KDCX597, Kenwood Excelon KDC-X597, KDC-X597, KDCX597, WWW.CRUTCHFIELD.COM Document ID : uuid:de7305dc-35a4-4028-b799-6cbc23ded77d Instance ID : uuid:7a2ef655-460f-40af-ab30-c9aa06120cb3 Producer : Adobe Acrobat 10.1.4 Paper Capture Plug-in Page Layout : SinglePage Page Mode : UseOutlines Page Count : 24EXIF Metadata provided by EXIF.tools