Kenxen WSF0100 Auto-Feed Portable WiFi Scanner User Manual WSF01 2014 11 14 indd
Kenxen Limited Auto-Feed Portable WiFi Scanner WSF01 2014 11 14 indd
Kenxen >
User Manual
AUTO-FEED PORTABLE Wi-Fi SCANNER
User Manual
1 List of accessory
USB cable, Scanner, Software CD, User Manual, 6 x AA batteries, Pouch.
2 Warnings for safety use
Please do the operation according to below safety rules in case of any hurt:
● Be away from re or hot device ● Please do not use an incorrect power supply
● Be away from water ● Please do not mix the using of batteries
● Be away from dust or dirty ● Please do not break the USB cable
● Do not disassemble the scanner ● Please do not painting
● Do not knock the product ● Disposals of abnormal case
● Please use the required Micro SD card ● Safety Storage
● Be away from such environment with strong electromagnetic ● Please do not insert or take out the Micro SD card when the scanner
interference is working, or it may cause some defects on Micro SD card
3 Product Information
This is a kind of Auto-Feed Portable Wi-Fi Scanner, it work as an automatic feeding scanner when use with docking station. Via
DIRECTSCAN Pro apps, it can scan & Wi-Fi transfer the image to mobile devices directly (iOS & Android).
With batteries & Micro SD card, it can work without PC. When work with PC, it is no need for Micro SD card & batteries. DIRECTSCAN
software included and it provides these functions of Picture Direct, OCR Direct, BCR Direct, Scan and OCR.
In this way, it can input these pictures into your needed software and do the OCR conveniently.
It can be previewing after you completed scanning. It is also very convenient to carry and you can use it to scan almost anything. It can be
connected to iPad & Android tablets to load scanned pictures directly.
4 Product Specifi cations:
Product Size(LxWxH) 285 mm x 50 mm x 43 mm
Weight 350g
Color type CIS (Contact image sensor)
Resolution 300DPI (default) , 600DPI , 1200DPI
Scanning speed A4 length: 1200DPI with color: ≤ 8s 1200DPI with mono: ≤ 5s
600DPI with color: ≤ 5s 600DPI with mono: ≤ 5s
300DPI with color: ≤ 5s 300DPI with mono: ≤ 5s
Scan width 216mm
Scan length 300DPI: ≤ 1200mm 600DPI: ≤ 1200mm 1200DPI: ≤1200mm
External memory card Micro SD card (TF Card) up to 32GB
Output le format JPEG / PDF
Display Panel 1.45” Color LCD (480*320)
Focus range Contact, ±0.3mm
USB Port USB 2.0 high Speed
Power source 6 x AA batteries or USB
USB mass storage Windows XP / Win7 / Vista or above Mac 10.4 or above
Wi-Fi 802.11b/g/n
CD software System
requirement
Operation System: Windows XP / Win7 / Vista or above
CPU: Pentium III or above
RAM: At least 256MB
CD ROM: 4x speed CD ROM or above
5 Introduction on appearance
5.1 Front View
No. Name Function / Description
1Enter Preview the scanning image
2Up / Resolution In menu mode, Upward function
In main interface, Resolution selection
3 Power/Scan Power on / Power Off / Menu
Power off mode, press this button for 2 second to turn on
Power on mode, press this button for 2 second to turn off
Power on mode, you can also press this button shortly to start or end scanning
4SD Card Slot The place to insert Micro SD card
5Down / File format In menu mode, Downward function
In main interface, File format selection
6 Menu Enter into menu, this button is to con rm the function on the menu
7USB Port When plug in USB cable and connect with PC, it can scan and input directly.
It also can use USB cable to provide 5V power supply and it is no need to load batteries.
8 Adjustable Plate To x scanning document width
9TFT Screen Show all the working status
5.2 Bottom View
No. Name Function / Description
1 Battery Cover You can load 6xAA batteries after opening. Scanner cannot recharge these batteries itself and you
need to take out for recharging if applicable.
6. Introduction on Micro SD card capacity
Below is the store capacity for 2GB card based on A4 standard paper side:
2GB Micro
SD Card
JPG PDF
300Dpi 600Dpi 1200Dpi 300Dpi 600Dpi 1200Dpi
Color 1600 600 120 1600 600 120
Mono 2000 800 120 2000 800 120
Remark: the quantity may vary due to different le color, size or content and the above information just for reference.
7. Introduction on TFT Display
When you switch on the scanner powered When you switch on the scanner powered by USB cable,
by batteries, you can use Micro SD mode to scan / Wi-Fi mode you can choose PC / Micro SD mode to scan / Wi-Fi mode
● Main Menu, scan and save ● Micro SD mode, scan & save ● Wi-Fi mode, working with
into Micro SD into TF card DIRECTSCAN Pro apps
7.1 Introduction on TFT Display
Right is the image for the TFT display:
NO. Name Description
1 Time Show setting time( hour: minutes: seconds)
2 Scanning QTY Show the scanning QTY saved in the Micro SD card
3Encryption Select Encrypting Not Encrypting
4Micro SD Card Status To indicate Micro SD card status: 1. No signal means no Micro SD card insert.
2. Signal means Micro SD insert. 3. Signal means Micro SD card is full.
5 Resolution Resolution level
6Format Select Scanned le format
7 Color format scanning image is mono or color
8 Battery Status To indicate the battery status:
Full power. Half power. Little power. Almost use up.
9 Status Display Showing scanning or connecting the PC
7.2 How to set Menu
Load scanner with Micro SD card & batteries and press “ ” for 2s to start.
Press “ ” button to enter and you can set color, resolution, le format, encrypted / not encrypted, format, time and reset here. Press
“ ” or “ ” to choose menu, press “ ” to enter the submenu option and press again to con rm after selecting.
Press “ ” button to exit menu or pause about 5 seconds to return to main interface.
7.2.1 Color setting
Press “ ” button to start and press “ ” to enter. Choose “ ” menu, press “ ” and enter color option:
“ ” show color mode, the scanned image will be colorized one; “ ” show mono mode, the scanned image will be black & white,
press “ ” or “ ” to choose.
Press “ ” button to exit the submenu.
7.2.2 Resolution setting
Choose “ ” menu, press “ ” button and enter the resolution option: 300dpi, 600dpi and 1200dpi can be chosen, press
“ ” or “ ” to select.
Press “ ” button to exit the submenu.
During standby status, you can press “ ” to select resolution directly
7.2.3 File format setting
Choose “ ” menu, press “ ” button and enter le format option: or format can be chosen, Press “ ” or
“ ” to select.
Press “ ” button to exit the submenu.
During standby status, you can press “ ” to select le format directly
7.2.4 File encryption setting
Choose “ ” menu, press “ ” button to enter le encryption option: “ ” show scanned le encrypted, “ ” show scanned le not
encrypted, press “ ” or “ ” to select.
Press “ ” button to exit the submenu.
Remark: 1. File locking or unlocking can only work after Micro SD card formatting;
2. The le can be read only if you put the Micro SD card into scanner and connect to computer.
7.2.5 Formatting setting
Note: after formatting, all the data in the Micro SD card will be lost, please make sure before formatting
Choose “ ” menu, press “ ” button to enter formatting option: “ ” indicate not formatting, “ ” indicate formatting the
Micro SD card.
7.2.6 Time setting
Choose “ ” menu, press “ ” button to enter time setting.
When YEAR/MONTH/DAY/HOUR/MINUTE shows on the right upper part of the TFT display, you can set the YEAR/MONTH/DAY/HOUR/
MINUTE, press “ ” or “ ” to adjust and press “ ” button to con rm and enter the next time setting.
7.2.7 RESET setting
Under Wi-Fi mode, press “ ” button into “ ” select: “ ” stands for not formatting, “ ” stands for formatting Micro SD
card.
7.2.8 Previewing and deleting picture
During the standby status, you can press “ ” button to preview the scanned image and press “ ” or “ ” to view whole
images.
If you need to delete any document, you can press “ ” button to enter and there will appear “ ” & “ ” option,: “ ” indicate
not deleting, “ ” indicate deleting. Press “ ” button to con rm.
8 Introduction on connecting with Tablets
8.1 Connect to iPad to read SD card
1. Switch on the scanner.
2. Connect the scanner to the iPad by USB cable & *iPad connection kit.
3.The saved pictures in the SD card will be displayed automatically.
8.2 Connect to Android Tablets to read SD card
1. Switch on the scanner.
2. Connect the scanner to Tablet via USB cable.
3. DCIM folder will show on the screen, double click to enter the folder for loading pictures.
9. Operations for DIRECTSCAN APP
9.1 Download APP
Download “ ” DIRECTSCAN app from App Store (iOS) or Play Store (Android) and setup.
9.2 How to connect scanner Wi-Fi
1.Press “ ” button and switch on scanner. Then press “ / ” button to select Wi-Fi mode, red Wi-Fi sign “ ” on the
screen will be ashing and Wi-Fi sign “ ” will turn into blue in 30 seconds. Now, Wi-Fi mode starts;
2.Switch on Wi-Fi setting on your mobile device and search scanner Wi-Fi account, as “(DIRECTSCAN – XXXXXXX), then type password to
connect (Default password: 12345678);
9.3 Wi-Fi Direct
Click “ ” DIRECTSCAN app to start, green Wi-Fi sign “ ” means Wi-Fi connected, press “ ” button can view all the documents
saved in Micro SD card, press “ ” button to enter Wi-Fi Direct operation, press “ ” button to start scanning and the scanned image
can transfer to mobile devices directly. After scanning, you can save or do own editing.
Back Save Edit
Synchronize
Connection Status
DIRECTSCAN-xxxxxxxx
DIRECTSCAN Apps
ONE-123
TWO-234
DIRECTSCAN-xxxxxxxx
More...
NETWORK
Connecting...
THREE-345
9.4 Wi-Fi Repeat
press “ ” button to enter Wi-Fi setting “ ” interface and choose a A/P Router Wi-Fi, input password and connect. Then go to mobile
device Wi-Fi setting interface and connect the selected A/P Router Wi-Fi. Click “ ” button the scanner Wi-Fi ID will show on the interface
to connect. Now, both scanner & mobile device connect to A/P router Wi-Fi and you can download the scanning image via Wi-Fi & share
saving images to others synchronically.
X
DIRECTSCAN-xxxxxxxx
Back
Back
RequiredNew Password
Confirm Password Required
SELECTING WI-FI...
OK
PEPEATER INTERFACE
Connection Status
ONE-123
TWO-234
DIRECTSCAN-xxxxxxxx
More...
NETWORK
Connecting...
THREE-345
DIRECTSCAN-xxxxxxxx
ONE-123
ONE-123
TWO-234
THREE-345
HJKDJAK-001
DAEFVZC-GEST
Connection Status
DIRECTSCAN-xxxxxxxx
App interface App interface Mobile device interface App interface
9.5 Download & save pictures
1. Use DIRECTSCAN APP.
2. Open DIRECTSCAN APP and click to connect.
3. Select you needed pictures and touch to download.
4. the downloaded images will be listed ,select the image for
editing directly. Pressing ,you can make relevant editing on
the selected images, such as delete, remove etc. Click to
select image and the selected image will be showing . Then
Pressing button and save image to your target location.
5. Click to create new folder and name.
6. Select your target folder and press button to save.
9.6 Editing picture
1. Select the pictures for editing.
2. Save editing image After editing completed, press to save
image.
9.7 Modify remove folder
1. Click and to select the picture & folder and click
for modi cation or removing.
9.8 Wireless Security Setting
1. Switch Mode Button on the scanner to setting mode(Left).
2. Press button and it will show the interface of Wireless Security Setting
as below image.
Then you can set SSID & Password here.
10 Computer modify SSID & Password
10.1 Turn on scanner and switch the button to Wireless Lan mode
1. Turn on scanner and switch the button to Wireless Lan mode;
open “Wireless Network Connection” at your PC and then press
“Refresh network list”.
3. Open the explorer to type 10.10.1.1 and switch the button to Wireless Lan setting mode after connecting. Press the Settings menu on the
left top of page to enter and submit the setting after modify the SSID & password. The newly SSID & password will take effect when you
resume the scanner.
Remark: Password should be 8 numbers.
11 Introduction on connecting with PC
11.1 Scanning to Micro SD card
Insert Micro SD card and plug in USB cable (no need for batteries).
Press “ ” button about 2 seconds, power on, then blinking in the lower part of the TFT, press or quickly to shift to it
1
3
4
8
9
7 6 5
2
8 9
1
Scan
DIRECTSCAN
2. After refreshing, Wireless Lan “magic scan-XXXXXXXX” will
turn up and the last 8 numbers are the same as the last 8
number of MAC Address on your scanner. Double click the
Wireless Lan and press the default password “12345678”
to connect.
DIRECTSCAN
WSF01
2 System Setting
Click the “System Setting” button, then you can set the system language, scan
color / orientation and OCR language/Export format. After nished the setting,
click “Save” button to save the setting, then you can start to scan.
*Please select not more than 3 languages for OCR.
3 Scan and OCR
a) Scan pictures
Click “Start/Stop Scan” button, press and hold the “Scan” button of scanner
to start scanning. After nished the scanning, release the “Scan” button.
The scanned picture will be inserted to this software directly, then you can
click “Save Image” button to save the scanned picture to your computer.
b)Open pictures from computer Click “Open Image” button to open a picture
from your computer, the picture will be inserted to this software directly.
c) OCR
Click “Preprocess Image” button to preprocess the picture, the image will
be change to Black and White picture as right picture :
Click “Start Recognizer”, then select folder and le name. After conrm the
setting, the software will start recognizing and export the picture to Word/Excel
les automatically .
12 Operations & Attentions for Auto-Feed Scanning
12.1 Power by batteries
11.1.1. Load the Micro SD card & batteries according to these signs on the scanner and press for 2s to open.
11.1.2. Set your required color, resolution, JPG/PDF and Encryption.
11.1.3. Put the document on the at table.
11.1.4. Put the scanner on the document and ensure the documents including the valid scanning width.
11.1.5. Press“ ” and the TFT display shows . It goes into scanning status.
11.1.6. Hold the scanner and slide according to your required direction until scanning completed.
11.1.7. Press“ ” again to exit scanning mode and one more le number will be added. In this way, it means the scanned le was
stored into Micro SD card.
12.2 Please pay much attention to the following points when you scan:
● Please make sure you input the Micro SD card when you make handy scanning, or it can’t work.
● Please do not take out the Micro SD card before the scanning completed.
● Please set the time & date when you open the scanner and the scanning date on the document just keeps the same as the setting.
● Please do not leave any nger printing or dirt on the CIS glasses and it may affect the scanning quality.
13 Introduction on Auto-Feed Scanning
13.1 Introduction on the application of Auto-Feed Scanning
Attention:
The batteries and USB cable should be connected when the scanner works with docking station
If you use the docking station batteries to supply power, the scanner can work whether you load the batteries on the scanner or not .
It only works when you plug the USB cable into the docking station. However, it can’t work if you plug the USB cable into the
scanner for PC connecting or power supply.
13.1.1 The ways to scan without plugging in USB cable
Load the scanner on the docking station according to the point 6;
Load 6xAA batteries on the docking station;
Set the menu according to point 8;
Adjust the paper tray according to the document width;
Put the scanning image upward and push it into the paper tray;
The automatic feeder will run the paper after the scanner detects and you can release the paper for auto scanning;
The automatic feeder will stop work after the paper goes out and the scanning has completed. After that, the picture number will
be increased by 1 piece on the TFT display and it means the scanned image was stored.
13.1.2 Usage when insert into USB
Please refer to 9, and please note below two point:
1. Insert the USB cable into the USB slot of docking station, not the scanner;
2. When scanning, do not press “ ” button, paper can be feed automatically, please refer to paper auto feed method 12.1.
13.1.3 Paper feed orientation when scanning with the docking station
When scanning with the DIRECTSCAN software, paper feed orientation should be followed as below, then scanning Image will be
correct
Paper
orientation
Orientation
setting
Correct paper feed
orientation
Wrong paper feed orientation
Horizontal
Vertical
When scanning without the DIRECTSCAN software, paper feed orientation should be followed as below, then scanning Image will be
correct
Paper orientation Correct paper feed
orientation
Wrong paper feed orientation
13.2 Attentions on the application of Auto-Feed Scanning
Please pay much attention to the below points when you use the scanner with docking station.
Not all the paper can go through the scanner and please see the below listed types:
Type Problems may arise
Not applicable
documents
Papers with more than 1.0mm depth The paper may jam on the process
Very soft paper or clothing It may not run
Paper width exceeds 216mm It can't input the paper tray
If these documents are in special shape (triangle, round, diamond, etc.), some area may be cut by the bottom automatic detective bar
and please see the details as below:
Paper in Shape Problems may happen Proposed solution
The area surpassing the dotted line
may be cut
Turn around the document and put the longest side go
rstly
The area surpassing the dotted line
may be cut
Turn around the document and put the longest side go
rstly
The area surpassing the dotted line
may be cut
Put the round document onto a rectangular paper and then
make the scanning
Others The surpassing area may be cut if the
longest side does not go rstly
Please keep the longest side go rstly and please use same
way as
the round document if the longest side is not at the end edge
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
*iPad connection kit not included.
All trademarks are the property of their respective owner.
11.3.3 Picture Direct
1 Click “Picture Direct” icon, the function icon will be appeared as
right picture:
2 Click the “Setting” button, then you can set the system language
and scan color / orientation. After you nished the setting, click
“Save” button to save the setting, then you can start to scan.
3 Select and open any ofce software or MSN / Skype / QQ
communication software that you want to insert a photo, then
place the mouse cursors in the selected software and location.
Press and hold the “ ” button on the scanner to start scanning.
Slide the scanner with the direction as below. After nish the
scanning, release the “ ” button. The scanned picture will be
inserted to your appointing software directly.
11.3.4 OCR Direct
1 Click “OCR Direct” icon, the function icon will be appeared as right picture:
2 Click the “Setting” button, then you can set the system language,
scan orientation and OCR language, after you nished the setting,
click “Save” button to save the setting, then you can start to scan.
*Please select not more than 3 languages for OCR.
3 Select and open any ofce software or MSN / Skype / QQ communication
software that you want to insert text, then place the mouse cursors in the
selected software and location. Press and hold the “Scan” button on the
scanner to start scanning. Slide the scanner with the direction as setting.
After nish the scanning, release the “Scan” button. The scanned text will
be inserted to your appointed software directly for editing.
11.3.5 BCR Direct
Click “BCR Direct” icon, the user interface will be appeared as right picture:
New card:
1 Click the “New Card” button, the user interface for creating
new card will be appeared as right picture:
Card List: You can nd all saved cards in the list.
Card Information: All card information.
Scan Image: Click “Scan Image” button to scan name card.
Recognize language: You can choose recognize language
according to card information.
Recognize: Recognize card information.
Save: Save card.
Close: Exit new card.
2 Click the “System Setting” button, then you can set the system
language and scan color / orientation, after you nished the setting,
click “Save” button to save the setting, then you can start to scan.
3 Click the “Scan Image” button, the user interface will be appeared as right picture:
Press and hold the “Scan” button of scanner to start scanning. After nished the
scanning, release the “Scan” button. The scanned picture will be inserted to this
software directly, then you can click “OK” button to conrm the scanned picture
and back to New Card interface, the scanned picture will be inserted to New
Card interface automatically.
Select recognize language, then click “Recognize” button to After you nish card edit, click “Save” button to save scanned card
recognize all information of scanned card as below: and back to “Card list” interface, it will add a new record in the card
list automatically. Also you can double click the record to edit the card.
Import image
Click the “Import image” button, then you can import card to the software.
Click “Open Image” button to open a card from your computer, the card will be inserted to this software directly, then you can click “OK”
button to conrm and back to New Card interface, the scanned picture will be inserted to New Card interface automatically. Then you
can edit and manage the card same with New Card.
Export Card
Firstly, press the “Export Card” button and select the format to proceed, then save the card to your
computer and you can input the card from the saved location.
Text format: there will be a folder named as Card Person name in the saved location and it includes
a card picture & Text le;
vCard format: there will be a vCard format le named as Card Person name in the saved location.
11.3.6 Scan and OCR
1 Click “Scan and OCR” icon, the user interface will be appeared as below:
Button Name Functions
S t a r t / S t o p S c a n Start/Stop Scanning
Open Image Insert pictures to the software from computer
Save Image Save scanned pictures to computer
Preprocess Image Preprocess the picture in the software
Start Recognizer Recognizing and export the picture to Word/Excel/Text les directly
System Setting Set the system language, scan color & orientation and OCR language
Exit Exit the software
Resolve After you cropped the picture, then you can click “Resolve” button to retrieve it
Rotate Left Rotate the picture to left
Rotate Right Rotate the picture to right
Flip X Flip vertical
Flip Y Flip Horizontal
Cut Press and hold the left button of mouse to select desired area, then click “Cut” button to crop the picture
shows le exported to Micro SD card.
Handle the scanning refer to 8.2 & 11 description
11.2 Mass storage mode
Just insert Micro SD card into the scanner and no need to setup any driver. It works with Windows and Mac system as below:
Works with Windows system (support Win XP, 7, Vista) Work with Mac (support Mac10.4 or above)
After plugging in USB cable, the PC screen shows as below: After plugging in USB cable, the PC screen shows as below:
Double click to open and enter the Micro SD card memory. Double click to open and enter the Micro SD card memory.
Then you can see your scanned images into the DCIM folder; Then you can see your scanned images into the DCIM folder;
11.3 Scanning with DIRECTSCAN software
When you use DIRECTSCAN software to scan with PC, the default resolution is 300 dpi and le format is JPG.
11.3.1 Setup the included software
Insert the CD into the CD driver, double click the setup in the disc and choose the language you will use, click the next button until the
installation completed.
11.3.2 Setup the included software
1 After the software was installed, an icon will be shown on your computer desktop.
DIRECTSCAN
2 Connect the scanner to your computer, double click the “DIRECTSCAN” Remarks:
icon, a DIRECTSCAN tool bar will be appeared as below: The preset language is English when you start the installation
software at the rst time and you can select another system
language from the “setting” on function icon.
Warnings for safety use
See installation instructions before connecting to the supply:
1. The maximum ambient temperature should not exceed 40℃.
Correct Disposal of this product
Warning: Changes or modification to this unit not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent
possible harm to the environment or human health from uncontrolled wash disposal. recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this product for environmental safe recycling.
5. The scanner is used for office machines and data processing appliances. lt is certified according to the relevant safety standard
EN 60950-1.
4. Children should be supervised to ensure that they do not play with the appliance.
3. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on
the apparatus.
2. The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.
.
Supplied USB cable with ferrite must be used with this unit to
ensure compliance with the Class B FCC limits