Keurig Rivo Cappuccino And Latte System User Guide

: Keurig Keurig-Rivo-Cappuccino-And-Latte-System-User-Guide-643844 keurig-rivo-cappuccino-and-latte-system-user-guide-643844 keurig pdf

Open the PDF directly: View PDF .
Page Count: 11

Let’s Begin!

Use and Care Guide

Cappuccino

& Latte System

IMPORTANT SAFEGUARDS

Safe Operation & Use

SAVE THESE INSTRUCTIONS.

1. Read all instructions before using.

2. Do not touch hot surfaces. Use handles

and knobs when available.

3. This appliance must be properly installed

and located in accordance with these

instructions before it is used.

4. The use of accessory attachments

not recommended by the appliance

manufacturer may result in fire,

electrical shock or injury to persons.

5. Do not place on or near a hot gas or

electric burner, or in a heated oven.

6. Do not use outdoors.

7. To protect against fire, electric shock and

injury do not immerse cords, plugs or the

appliance in water or any other liquid.

8. Do not overfill the Water Reservoir

with water.

9. Use only water in this appliance! Do not

put any other liquids or foods in the Water

Reservoir except as instructed in the

Cleaning Instructions in this guide.

10. Unplug System before cleaning or

maintenance. Allow to cool before putting

on or taking off parts and before cleaning

the appliance. System automatically

enters standby mode after 2 minutes of

non use.

11. For best operation, plug the appliance

into its own electrical outlet on a

dedicated circuit to prevent flickering

of lights, blowing of fuses or tripping a

circuit breaker.

12. Do not operate any appliance with a

damaged cord or plug or after the

appliance malfunctions or is damaged

in any manner. Contact Keurig Customer

Service to report any malfunction of or

damage to the System.

13. Do not let the cord hang over the

edge of the table or counter, or touch

hot surfaces.

14. Close supervision is necessary when any

appliance is used by or near children.

15. Do not lift the Brew Handle to open the

System while brewing is in progress.

16. Always keep the Water Reservoir Lid

on the Water Reservoir unless you are

refilling it.

17. This appliance is equipped with a

Power Cord having a grounding wire

with a grounding plug. The appliance

must be grounded using a 3-hole

properly grounded outlet. In the event

of an electrical short circuit, grounding

reduces the risk of electrical shock.

18. If the outlet is a standard 2-prong wall

outlet, it is your personal responsibility

and obligation to have it replaced with a

properly grounded 3-prong wall outlet.

19. Do not, under any circumstances, cut or

remove the third (ground) prong from the

Power Cord or use an adapter.

20. Consult a qualified electrician

if the grounding instructions are not

completely understood, or if doubt exists

as to whether the appliance is properly

grounded.

21. Do not use the appliance for other than

its intended use.

WARNING WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE THE

BOTTOM COVER. NO USER SERVICEABLE PARTS ARE INSIDE. REPAIR SHOULD BE

DONE BY AUTHORIZED SERVICE PERSONNEL ONLY.

RISK OF FIRE OR

ELECTRIC SHOCK

DO NOT OPEN !

WARNING TO USERS AND PARENTS: DO NOT permit children to use System unless there

is adult supervision. System dispenses very hot water.

WARNING THIS PRODUCT CONTAINS CHEMICALS, INCLUDING LEAD, WHICH IS KNOWN

TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.

DO NOT permit children to use System unless there is adult supervision. System

dispenses very hot water.

CAUTION: There are sharp needles that puncture the Rivo™ pack located above the Rivo™

Pack Holder and in the bottom of the Rivo™ Pack Holder. To avoid risk of injury, do not put

your fingers in the Rivo™ Pack Assembly Housing.

CAUTION: There is extremely hot water in the Rivo™ Pack Holder during the brew process.

To avoid risk of injury, do not lift the Brew Handle or open the Rivo™ Pack Assembly Housing

during the brewing process.

CAUTION: The Frothing Whisk is detachable and may pose a choking hazard.

WARNING: Very hot steam and liquid. Use only with Pitcher included. Operation with any

other pitcher or operation with no pitcher may result in injury.

SHORT CORD INSTRUCTIONS: A short power supply cord is provided to reduce the risk

of becoming entangled in or tripping over a longer cord. If an extension cord is used, (1)

the marked electrical rating of the cord set or extension cord should be at least as great

as the electrical rating of the appliance; (2) the cord should be arranged so that it will not

drape over the countertop or tabletop where it can be pulled on by children or tripped over

unintentionally; and (3) the extension cord must include a 3-prong grounding plug.

THIS PRODUCT IS FOR HOUSEHOLD USE ONLY.

When using electrical appliances, basic safety precautions should be

followed, including the following:

WELCOME 5

SYSTEM OVERVIEW 6

PREPARING YOUR SYSTEM 8

CRAFTING YOUR FIRST BEVERAGE 10

THE RIVO™ CONTROL PANEL 11

USING YOUR SYSTEM 12

HELPFUL HINTS 15

CLEANING AND MAINTENANCE 16

TROUBLESHOOTING 17

WARRANTY 18

WELCOME

TABLE OF CONTENTS

Thank you for purchasing the Keurig® Rivo™ Cappuccino and Latte System. Before operating

the Rivo™ System, we recommend carefully reading these instructions to learn how to use,

clean and care for the System. We hope you enjoy crafting the perfect espresso, cappuccino,

latte and more!

Record Your Rivo™ System Serial Number Above

The serial number can be found on the bottom of the Rivo™ System gift box

and on the side of housing behind the Water Reservoir. Removing the serial

number label from the Rivo™ System will void warranty.

5

J Frothing Lid

K Frothing Whisk

(Detachable)

L Steaming Wand

(Detachable from Lid)

M Frothing Pitcher

N Short Espresso Button

O Espresso Lungo Button

P Cappuccino Froth Button

Q Latte Froth Button

R Cold Froth Button

B

C

A

I

H

D

D1

J

K

L

M

FROTHING

PITCHER

R

Q

P

N O

CONTROL PANEL

G

F

E

CONTROL PANEL

RIVO™ SYSTEM

Indicates components which are top-rack dishwasher safe.

Do not place any other component in the dishwasher.

The Keurig® Rivo™ System is not for use with K-Cup® packs or Vue™ packs.

SYSTEM OVERVIEW

FROTHING PITCHER

A Water Reservoir Lid

B Water Reservoir

C Power Cord

D Rivo™ Pack Bin

D1 Beverage Platform

E Drip Tray Lid

F Drip Tray Overflow Indicator

G Drip Tray

H Power Button

I Brew Handle

6 7

PREPARING YOUR SYSTEM

1 Min

Prepare the Water Reservoir

STEP 1: Remove all packing materials from the Keurig®

Rivo™ System and Frothing Pitcher. Place the System on

a flat, stable surface away from water and heat sources.

Remove all adhesive tape and labels.

STEP 2: Lift and remove the Water Reservoir Lid, then

remove the Water Reservoir by lifting up and away from

the Rivo™ System.

STEP 3: Rinse the Water Reservoir and fill with water.

We recommend bottled or filtered water.

Hot water or any other liquid may damage the Water

Reservoir. Always ensure the Water Reservoir is filled to

the REFILL line before turning on the Rivo™ System.

Prepare the Brewing System*

STEP 1: Place a 12 oz. mug on the Drip Tray. Plug the Power

Cord into a grounded outlet and press the Power Button on

the right side of the System.

STEP 2: After about 1 minute, the Control Panel will flash

and you will hear a beep. This indicates the Rivo™ System

is ready. Press the Espresso Lungo Button to run the first

cleansing brew. When brew is complete, discard the hot

water from the mug.

Prepare the Frothing System*

STEP 1: Remove packing material and static cling from

Frothing Pitcher and fill to MIN FILL with water. Secure

the Lid and place the Frothing Pitcher into the System.

STEP 2: Press the Latte Froth Button to run the first

cleansing froth. You will hear a beep when the cycle

is complete.

STEP 3: Remove the Frothing Pitcher from the System

and carefully remove the Lid. Discard the water and dry

all components.

*The first cleansing brew and cleansing froth cycles prepare the

System for your first beverage. It is normal for the System to be

slightly louder during these initial cycles.

*After brewing, the Rivo™ System will automatically prepare

for your next brew. As a safety feature, your System will

automatically shut off at any stage when it is idle for longer

than 2 minutes. Press the Power Button to restart.

You are now ready to craft your

first beverage!

1 Min

8 9

CRAFTING YOUR FIRST BEVERAGE

A Place a mug on the

Beverage Platform.

B Lift the Brew Handle

and place a Rivo™

pack into the System.

C Lower Brew Handle and

select your ESPRESSO

SIZE on the bottom row

of the Control Panel. After

about 1 minute, you will

hear a beep. This indicates

your espresso is complete.

Brew Espresso

STEP 1

THE RIVO™ CONTROL PANEL

Combine espresso with frothed milk and enjoy!

STEP 3

A Remove the Frothing

Pitcher from the System

and rinse thoroughly.

B Fill Frothing Pitcher with

fresh, cold milk.

Important: Add enough milk

to fill to MIN FILL, but do

not fill beyond MAX FILL. Do

not add ice, syrup or any other

ingredients to the milk prior

to frothing. Doing so may

damage the System.

C Return the sealed Pitcher

to the System by aligning

arrow on Frothing Lid.

Then select a FROTHING

MODE on the top row of

the Control Panel. After

about 90 seconds, you will

hear a beep. This indicates

your froth is complete.

STEP 2 Froth Milk

SHORT ESPRESSO (1.4 OZ.)

Perfect for espresso beverages such

as a cappuccino, latte or macchiato.

ESPRESSO LUNGO (2.8 OZ.)

Perfect for an americano

or iced latte.

CAPPUCCINO FROTH

Creates more foam

and less steamed milk.

Perfect for a cappuccino

or macchiato.

LATTE FROTH

Creates less foam and

more steamed milk.

Perfect for a latte.

COLD FROTH

Keeps your milk cold,

creates less foam and

more milk. Perfect

for an iced latte.

FROTHING MODES*

ESPRESSO SIZES

In order to ensure ideal pressure for espresso and frothed milk, the Rivo™

System is designed to perform one function at a time. Wait for brewing to

complete before selecting a frothing mode.

*Important: Add enough milk to fill to MIN FILL, but do not fill beyond

MAX FILL. Do not add ice, syrup or any other ingredients to the milk prior

to frothing. Doing so may damage the System.

10 11

USING YOUR SYSTEM

Crafting a Cappuccino

STEP 1: Place a 12 oz. mug on the Drip Tray and

prepare a Short Espresso (1.4 oz.) by selecting

the Short Espresso Button on the Control Panel.

STEP 2: Pour cold milk to MIN FILL of the

Frothing Pitcher (4.5 oz.) and place the Frothing

Lid on the Frothing Pitcher.

Important: Add enough milk to fill to MIN FILL, but do not fill

beyond MAX FILL. Do not add ice, syrup or any other ingredients

to the milk prior to frothing. Doing so may damage the System.

STEP 3: Return the sealed Pitcher to the System

and press the Cappuccino Froth Button.

If the Frothing Pitcher has not been positioned securely, you will hear

3 beeps when selecting a frothing mode. Remove the Frothing Pitcher

and re-insert, ensuring the Pitcher is securely in place.

STEP 4: When the milk is frothed, pull the

Frothing Pitcher from the System and carefully

remove the Lid. Pour the milk over the espresso

and enjoy!

Crafting a Latte

STEP 1: Place a 12 oz. mug on the Drip Tray and

prepare a Short Espresso (1.4 oz.) by selecting

the Short Espresso Button on the Control Panel.

STEP 2: Pour cold milk to MAX FILL of the

Frothing Pitcher (6 oz.) and place the Frothing

Lid on the Frothing Pitcher.

Important: Add enough milk to fill to MIN FILL, but do not fill

beyond MAX FILL. Do not add ice, syrup or any other ingredients

to the milk prior to frothing. Doing so may damage the System.

STEP 3: Return the sealed Pitcher to the System

and press the Latte Froth Button.

If the Frothing Pitcher has not been positioned securely, you will hear

3 beeps when selecting a frothing mode. Remove the Frothing Pitcher

and re-insert, ensuring the Pitcher is securely in place.

STEP 4: When the milk is frothed, pull the

Frothing Pitcher from the System and carefully

remove the Lid. Pour the milk over the espresso

and enjoy!

MAX FILL

MIN FILL

12 13

CARING FOR YOUSING YOUR SYSTEM

Crafting an Iced Latte

STEP 1: Fill a cup with ice and set aside. Place a

separate 3 oz. mug on the Beverage Platform

and prepare an Espresso Lungo (2.8 oz.) by

selecting the Espresso Lungo Button on the

Control Panel. Pour the espresso over the ice.

Important: Do not brew espresso directly into a glass cup filled

with ice. Doing so may cause the glass to crack or break.

STEP 2: Pour cold milk to MAX FILL of the

Frothing Pitcher (6 oz.) and place the Frothing

Lid on the Frothing Pitcher.

Important: Add enough milk to fill to MIN FILL, but do not fill

beyond MAX FILL. Do not add ice, syrup or any other ingredients

to the milk prior to frothing. Doing so may damage the System.

STEP 3: Return the sealed Pitcher to the System

and press the Cold Froth Button.

If the Frothing Pitcher has not been positioned securely, you will hear

3 beeps when selecting a frothing mode. Remove the Frothing Pitcher

and re-insert, ensuring the Pitcher is securely in place.

STEP 4: When the milk is frothed, pull the

Frothing Pitcher from the System and carefully

remove the Lid. Pour the milk over the espresso

and enjoy!

MAX FILL

1 AUTOMATIC SHUT-OFF – As a safety feature, your System will automatically shut off

after it is idle for longer than 2 minutes. Just press the Power Button to restart.

2 EMPTy wATER RESERvOIR NOTIFICATION – If the Water Reservoir becomes

empty during brewing or frothing, the System will stop. The Control Panel will light up in

a circular pattern, flashing on the last mode used, and you will hear a series of beeps. If the

Water Reservoir is filled within 2 minutes, simply press the last used mode and continue

crafting your beverage. If more than 2 minutes have passed, the System will automatically

shut off. Press the Power Button and begin a new brew. You will need a new Rivo™ pack.

3 FROTHING PITCHER NOTIFICATION – If the Frothing Pitcher has not been positioned

securely, you will hear 3 beeps when selecting a frothing mode. Remove the Frothing

Pitcher and re-insert, ensuring the Pitcher is securely in place.

4 THE RIGHT wATER – For the best tasting espresso, cappuccino or latte we recommend

using bottled or filtered water. We do not recommend using distilled or reverse osmosis water.

5 ICED BEvERAGES – Creating an iced latte or cappuccino is easy. Fill a cup with ice and

set aside. Brew espresso into a separate mug and pour the espresso over the ice. Use the

Cold Froth Button to froth milk and add the milk to the iced espresso. Important: Do not

brew espresso directly into a glass cup filled with ice. Doing so may cause the glass to crack

or break. Do not add ice, syrup or any other ingredients to the milk prior to frothing. Doing

so may damage the System.

6 THE DRIP TRAy AND RIvO™ PACK BIN – The Drip Tray is designed to capture excess

liquid from the brewing process and will fill with liquid after 10 to 12 brews. The Drip Tray

Indicator will become visible when the Drip Tray is almost full. The Rivo™ Pack Bin holds

up to 12 used Rivo™ packs. Empty both components by carefully removing them from the

System. Empty contents of the Drip Tray into the sink and dispose of the used Rivo™ packs.

Clean and dry both components before returning them to the System.

7 CLEAN yOUR SySTEM REGULARLy – To keep your System looking and performing

at its best, be sure to clean the external and internal components as indicated on page 16.

8 STORING – When storing your System, empty and dry all components. Store your System

upright in a safe, dry, frost-free environment.

HELPFUL HINTS

14 15

SOLUTION

• Plug System into an independent outlet.

• Make sure the Power Button is pressed.

• During normal operation, the System will shut off when it is

idle for longer than 2 minutes. Just press the Power Button

to restart.

• Check to be sure that the System is plugged in securely.

• Plug into a different outlet.

• Reset your home circuit breaker, if necessary.

• Make sure the System has power (see above).

• Check that the Water Reservoir is filled.

• System may be cold or frozen. Let System rest at room

temperature for at least 2 hours before powering on.

• Make sure the System has power (see above).

• Under normal operation, the System will shut off when it is idle

for longer than 2 minutes. Just press the Power Button to restart.

• If the System shuts off in the middle of a brew (not from power

outage), make sure the Water Reservoir is filled.

• Remember that any liquid overflow (from your mug or the

Water Reservoir) will be caught in the Drip Tray.

• When the Drip Tray is almost full, the red Drip Tray Overflow

Indicator will appear. Carefully remove the Drip Tray (there

may be hot liquid in it). Empty contents into the sink.

• The Power Button will only restart or turn on the System. It will

not turn the System off. The System will automatically shut off

after 2 minutes (see “System shuts off automatically,” above).

• This means that the Drip Tray is almost full. Carefully remove

the Drip Tray (there may be hot liquid in it). Empty contents

into the sink.

• The Water Reservoir needs to be refilled.

• Empty the Rivo™ Pack Bin.

• A Rivo™ pack may have been inserted incorrectly. Lift and lower

the Brew Handle to adjust the Rivo™ pack.

• Ensure you are using a new Rivo™ pack. Rivo™ packs cannot

be reused.

• Make sure you are using cold milk. Milk at room temperature

will not froth well.

• The Water Reservoir needs to be refilled.

SITUATION

System does not have power

System will not brew

System will not brew

when used for the first time

System shuts off automatically

There is water in the Drip Tray

The Power Button does

not turn System off

Red Indicator appears in Drip Tray

The System pump is

making a loud sound

The Brew Handle

won’t close

The espresso tastes weak

The milk does not froth

The Control Panel Buttons are

flashing in a circular pattern

TROUBLESHOOTINGWARRANTYCLEANING AND MAINTENANCE

Before cleaning the Keurig® Rivo™ System, unplug the Power Cord and wait for the System

to cool down. Unless otherwise noted, clean components with warm soapy water. Do not

use solvents, alcohol or other harsh substances. Do not place any components in an oven.

wATER RESERvOIR – The Water Reservoir should be cleaned regularly. The Water

Reservoir is not dishwasher safe. Wash by hand with warm water and mild soap.

FROTHING PITCHER – After each use, thoroughly clean all components of the Frothing

Pitcher. Place them on the top rack of the dishwasher or wash by hand with warm water

and mild soap.

Clean the interior components after every 10 to 12 beverages:

BREwING COMPONENTS – To clean the interior brewing components, place a mug on

a the Drip Tray. Lift and lower the Brew Handle without inserting a Rivo™ pack and press the

Espresso Lungo Button. When the process is complete, discard the water from the mug.

FROTHING COMPONENTS – Fill Frothing Pitcher to MIN FILL with water. Secure the Lid

and place the Frothing Pitcher into the System. Press the Latte Froth Button and wait for the

cycle to complete. Remove the Frothing Pitcher from the System and carefully remove the

Lid. Discard the water and dry all components.

DRIP TRAy AND RIvO™ PACK BIN – The Drip Tray is designed to capture excess liquid

from the brewing process and will fill with liquid after 10 to 12 beverages. The Drip Tray

Indicator will become visible when the Drip Tray is almost full. The Rivo™ Pack Bin holds up to

12 used Rivo™ packs. Empty both components by carefully removing them from the System.

Empty contents of the Drip Tray into the sink and dispose of the used Rivo™ packs. Clean and

dry both components before returning them to the System.

DE-SCALING – Mineral content in water varies from place to place. Depending on the

mineral content of the water in your area, calcium deposits or scale may build up in your

System. Scale is non-toxic, but left unattended, it can hinder System performance.

Visit www.keurig.com to view our recommended de-scaling procedure.

If other issues arise with your System, call Keurig Customer Service at 1.866.901.BREW (2739).

Damage to the System resulting from the failure to follow these instructions will void the warranty.

16 17

WARRANTY

Limited One Year Warranty

Keurig warrants that your Brewer will be free of defects in materials or workmanship under normal

home use for one year from the date of purchase. It is recommended that you fill out and return the

warranty card enclosed with your Brewer so that your purchase information will be stored in our system.

Keurig will, at its option, repair or replace a defective Brewer without charge upon its receipt of proof

of the date of purchase. If a replacement Brewer is necessary to service this warranty, the replacement

Brewer may be new or reconditioned. If a replacement Brewer is sent, a new limited one year warranty

will be applied to the replacement Brewer.

This warranty only applies to Brewers operated in the United States and Canada. This warranty gives you

specific legal rights, and you may also have other rights that vary from state to state and, in the case of

Canada, from province to province.

Only the use of Keurig Brewed® Rivo™ brand packs and accessories will guarantee the proper functioning

and lifetime of your Keurig Brewer. Any damage to or malfunction of your Brewer resulting from the use

of non Keurig Brewed® Rivo™ brand packs and accessories may not be covered by this warranty or may

result in a service fee if the defect is determined to be caused by such use.

What is not covered by the Limited Warranty?

THIS WARRANTY DOES NOT COVER CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS

PROPERTY DAMAGE AND DOES NOT COVER INCIDENTAL COSTS AND EXPENSES RESULTING

FROM ANY BREACH OF THIS WARRANTY, EVEN IF FORESEEABLE. Some states or provinces do not

allow the exclusion or limitations of incidental or consequential damages, so the above limitation or

exclusion may not apply to you depending on the state or province of purchase. Nor does this warranty

cover damages caused by use of non Keurig® Rivo™ brand packs or accessories, services performed by

anyone other than Keurig or its authorized service providers, use of parts other than genuine Keurig

parts, or external causes such as abuse, misuse, inappropriate power supply or acts of God.

Other Limitations

THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER EXPRESS WARRANTY, WHETHER

WRITTEN OR ORAL. IN ADDITION, KEURIG HEREBY SPECIFICALLY DISCLAIMS ALL OTHER

WARRANTIES WITH RESPECT TO YOUR R500 SYSTEM, INCLUDING ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Some states or provinces do not

allow disclaimers of such implied warranties or limitations on how long an implied warranty lasts, so the

above limitation may not apply to you depending on the state or the province of purchase.

How do you obtain warranty service?

Keurig Systems are high-quality appliances and, with proper care, are intended to provide years of

satisfying performance. However, should the need arise for warranty servicing, simply call Keurig

Customer Service at our toll free phone number 1.866.901.BREW (2739). Please do not return your

System for servicing without first speaking to Keurig Customer Service to obtain a Returns Material

Authorization (RMA) number. Keurig Systems returned without an RMA number will be returned to the

sender without servicing.

Keurig, Incorporated

55 Walkers Brook Drive

Reading, MA 01867

1.866.901.BREW (2739) 18

Keurig, Incorporated

55 Walkers Brook Drive

Reading, MA 01867

Keurig, Incorporated is a

wholly-owned subsidiary

of Green Mountain

Coffee Roasters, Inc.

For Household Use Only

Made in China.

Printed in China.

© 2012 Keurig, Incorporated

All rights reserved

P/N 60-202246-000 Rev A 06/12

Cappuccino

& Latte System

www.keurig.com | 1.866.901.BREW