KeyScan KPROX3 Proximity RFID Reader User Manual Manual
Keyscan Inc. Proximity RFID Reader Manual
KeyScan >
Manual
Specifications Dimensions Mullion: 115 mm x 45 mm x 17.5 mm (4 1/2" x 1 3/4" x 11/16") K-PROX3 Proximity Reader Wall plate: 121 mm x 76 mm 17.5 mm (4 25/32" x 3" x 11/16") Power Requirements Installation Guide 12 VDC, 80 mA Read Range This guide outlines how to connect the K-PROX3 proximity reader. The K-PROX3 has unique LEDs and enhanced security features designed for Keyscan access control systems with compatible firmware. Enhanced security and LED features may not function with non-Keyscan control boards. Off metal: up to 12.7 cm (5") On metal: up to 10.2 cm (4") Cable 12" wire pigtail Weight With mullion: With wall plate: Environmental Operating Temperature: -400 C to +650 (-400F to +1490F) Installation li!l Connections Connections must be in accordance with NFPA 70. Reader and/or control unit power sources must not be on circuits regulated by switches. Certifications CE CE, ETL FCC Compliance Statement: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: {1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Product can be used without license conditions or restrictions in all European Union countries, including Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland , Portugal, Romania, Slovakia, Spain, Sweden, United Kingdom, as well as other non-EU countries, including Iceland, Norway, and Switzerland This device complies with Industry canada licence-exempt RSS standard(s}, Operation is subject K-PROX Proximity Reader Connections Wall Switch Plate Mounting Templates 5, 7 Screw - tbd Specifications Supports certain HID© 125-kHz proximity protocols li!l Uses proven digital radio frequency identification technology li!l Has dedicated access, power, Present3 and global lockdown LEDs li!l Offers anti-tamper capability for enhanced security (tamper switch not included) li!l Has innovative heartbeat to detect wiring fault or reader damage with alarm reporting triggered by the ACU li!l Designed for indoor or outdoor use li!l Suitable for mullion or single gang mount li!l Electronics sealed in tamper-resistant epoxy potting K-PROX3 Proximity Reader to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme Industrie Canada exempts de licence standard RSS (s ) . Le fonctionnement est soumis aux deux conditions suivantes : ( 1 ) ce dispositif ne peut pas provoquer d'interferences et ( 2 ) ce dispositif doit accepter toute interference , y compris les interferences qui peuvent causer un mauvais fonctionnement du dispositif Note: This equipment has been tested and found to comply with the limits for a Class A Digital device , pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference when the equipment Is operated In a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference in which case the user will be required to correct the interference at his own expense. IMPORTANT! Changes or modifications not expressly approved by Keyscan, Inc. could void the user’s authority to operate the equipment. K eyscan Inc. A Member of the Kaba Group 901 Burns St., E. Whitby, Ontario, Canada LlN OE6 1.888.539.7226 (toll free Canada/USA) 905.430.7226 (elsewhere) www.keyscan.ca Technical support hours - 9:00 A.M. to 6:30 P.M. Eastern Time PROX3 Installation Guide - 03.16 (Document # KD10065-E) 01160-001 Rev 1 BEYOND SECURITY Keyscan Inc. A Member of the Kaba Group Features Features Installation and wiring of systems must be in accordance with the National Electrical Code, ANSI/NFPA 70. Do Not Connect To A Receptacle Controlled By A Switch. K� Parts List Contents 6 conductor shielded 22 AWG cable-152 metres (500 feet) maximum
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2016:04:11 12:34:16-07:00 Creator : Adobe Illustrator CC 2015 (Windows) Modify Date : 2016:05:03 15:04:00-07:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15 Metadata Date : 2016:05:03 15:04-07:00 Creator Tool : Adobe Illustrator CC 2015 (Windows) Format : application/pdf Document ID : uuid:2d807c69-28fa-4bd2-a628-56ff12be340a Instance ID : uuid:bcd2a9d6-d36b-49fa-a3c4-0c8fb1f324c0 History Action : editedScannedDoc, editedScannedDoc, editedScannedDoc, editedScannedDoc, editedScannedDoc History When : 2016:04:11 14:49:23-07:00, 2016:04:20 07:59:19-07:00, 2016:04:20 09:23:41-07:00, 2016:05:03 12:53:51-07:00, 2016:05:03 15:04-07:00 History Parameters : Page:1, Page:1, Page:1, Page:1, Page:1 Producer : Adobe PDF library 15.00 Page Count : 4 For : Rudy Regidor, Title : 01160-001 K-PROX3 (Quick Start Guide) 11APR2016 reduced size_2.eps Bounding Box : 33 35 578 756 Container Version : 11 Creator Version : 19 Warning : [Minor] Ignored duplicate Info dictionary Image Height : 721 Image Width : 545 Image Size : 545x721 Megapixels : 0.393EXIF Metadata provided by EXIF.tools