KeyTrak OBD1 Wireless remote vehicle inventory transmitter User Manual ActiveLot OBD Module

KeyTrak, Inc. Wireless remote vehicle inventory transmitter ActiveLot OBD Module

User Manual

Download: KeyTrak OBD1 Wireless remote vehicle inventory transmitter User Manual ActiveLot OBD Module
Mirror Download [FCC.gov]KeyTrak OBD1 Wireless remote vehicle inventory transmitter User Manual ActiveLot OBD Module
Document ID2252316
Application IDUosn00DybXQCw1cWLkQwyA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize3.68kB (46051 bits)
Date Submitted2014-04-25 00:00:00
Date Available2014-04-25 00:00:00
Creation Date2014-03-14 15:48:59
Producing SoftwareGPL Ghostscript 8.15
Document Lastmod2014-04-17 13:21:16
Document TitleMicrosoft Word - ActiveLot OBD Module.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: wegnercl

ActiveLot OBD Module User’s Guide
Overview
The ActiveLot OBD Module gathers information from the vehicle along with the GPS location
and transmits it back to the ActiveLot system. While the vehicle is running, it will transmit
once every five seconds. While the vehicle is off, it will initiate a transmission cycle once
every hour.
For help with installation procedures, or if you have any questions, contact:
KeyTrak Support
1-800-541-5033
FCC Warnings
This device complies with part 15 of FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Confidential & Proprietary Information of KeyTrak, Inc. © 2014
ActiveLot OBD Module User’s Guide
Procedure
WARNING! Do not insert or remove the OBD module from the vehicle’s OBD-II port
while the vehicle is running.
1.
Locate your vehicle’s 16-pin OBD-II port.
2.
Insert the OBD module into the OBD-II port on your vehicle.
3.
Start the vehicle. This is required to pull the VIN (vehicle identification number) from the
vehicle’s computer system.
4.
You can verify the unit is transmitting using the ActiveLot iOS app, the Web app, or the
KeyTrak application.
NOTE: A couple of minutes after installation, the OBD module will acquire the
necessary GPS satellite information to provide an accurate location.
Confidential & Proprietary Information of KeyTrak, Inc. © 2014

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Author                          : wegnercl
Create Date                     : 2014:03:14 15:48:59Z
Modify Date                     : 2014:04:17 13:21:16-05:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : wegnercl
Title                           : Microsoft Word - ActiveLot OBD Module.doc
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2014:04:17 13:21:16-05:00
Producer                        : GPL Ghostscript 8.15
Document ID                     : uuid:5f226bbc-f67b-411d-9974-5e4e4cb9941f
Instance ID                     : uuid:0b469383-e669-4484-8cc1-9d064ee2e94a
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2ABY5OBD1

Navigation menu