Keystone Microtech KT6160 EZ-Extender User Manual KT 6160 UserManual EN 1 0 FCC

Download:
Mirror Download [FCC.gov]
Document ID	2412574
Application ID	5cz9U7NpGv6QzH2XW9YbjQ==
Document Description	User Manual rev.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	292.45kB (3655616 bits)
Date Submitted	2014-10-07 00:00:00
Date Available	2014-10-07 00:00:00
Creation Date	2014-10-07 11:30:20
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2014-10-07 13:34:29
Document Title	Microsoft Word - KT-6160-UserManual-EN-1.0 _FCC_
Document Creator	PScript5.dll Version 5.2
Document Author:	TracyTing

KT-6160 EZ-Extender
User’s Manual
Version 1.0, Aug. 2014
KT‐6160 EZ‐Extender
User’s Manual
Copyright Notice
©2014 Keystone Microtech Corporation. All rights reserved.
Important Note
Radiation Explosure Statement
This equipment complies with CE/FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Caution:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
This product contains a radio transmitter with wireless technology which has been
tested and found to be compliant with the applicable regulations governing a radio
transmitter in the 2.400GHz to 2.483GHz frequency range.
KT‐6160 EZ Extender UM
Thee KT‐6160 EZZ‐Extender
KT‐6
6160 EZ‐Exttender is an
n IO extension unit for the KT‐6101 Smart IO controller (SIO).
How
wever, in ad
ddition to th
he wired exttension via the
t RS‐232 serial port to the SIO, the
EZ‐EExtender alsso supportss a wireless exntension based on 2.4GHz
RF teechnology for
rem
mote I/O app
plication.
Thiss user’s man
nual guides you througgh the follow
wing steps to
t understand the basic
opeeration of th
he KT‐6160 EZ‐Extendeer:
z Understan
nd the hard
dware
z Product Specification
ns
z Install the
e hardware
z Use the device
1. Understand
d the hardw
ware
Hardware desccription:
KT‐6
6160 EZ Exteender UM
1 : Device ID
2 : Antenna co
onnector
3 : Serial port connector (D‐SUB
9 Fe
emale)
4 : Wireless Biinding butto
on
5 : Reset butto
on
6 : Status LEDss ( Power、RF、RS232
2/RS485、A
Alarm)
7 : RS‐232 / RSS‐485 modee switch
8 : I/O terminaal block
I/O terminal block:
on:
Portt Descriptio
Port
Deescription
Speecification
Digital Input modee：
DIO
O 0 ~ DIO 3
Softwarre Configuraable
Digital Input/Outp
put
Ports
+5Vd
dc ~ +30Vdcc
Digital Output mo
ode:
+5Vd
dc ~ +50Vdcc
@ 200
0mA/Chann
nel
Ain
n0+/Ain0‐
Analogg Input portt 0
e：0~20mA
A; 4~20mA
Current mode
Ain
n1+/Ain1‐
Analogg Input portt 1
Vo
oltage mode
e：0~5V; ±5
5V; 0~10V;
KT‐6
6160 EZ Exteender UM
±10V;
VS ‐ / VS +
Power Input
DC +10V ~ +30V
GND
Ground
Isolation Gnd
2. Product Specifications:
Models
KT‐6160
Analog Input (AI)
Input Channels
Input Types
0~20mA, 4~20mA, ‐10~+10V, ‐5~+5V, 0~+10V,
0~+5V
Resolution
16‐bits
Sampling Rate
60 samples/sec
Configurable Digital Input/Output (DIO)
Output Channels
Type
Sink
Max Load current
200mA/channel
Load Voltage
+5V ~ 50VDC
Power Requirements
Reverse Polarity Protection
Yes
Powered from Extension Port
Yes, 5Vdc
KT‐6160 EZ Extender UM
3. Install the hardware
(3.1)
KTT‐6160 EZ‐exxtender can
n be conneccted to KT‐6
6101 Smart IO contoller as
thee extended IO.Use an D‐Sub
9 cab
ble to cooneect the two devices as
folllowing:
(3.2)
(3.3)
onnecting th
he power: DC
D +10 ~ +30V to VS+ and
a VS‐
Co
Grrounding the unit
4. Use the device
(4.1) Byy switching the
t Device ID,
I KT‐6160
0 can be con
nfigured as o
one of the
folllowing mod
des:
KT‐6
6160 EZ Exteender UM
1. Extension
n mode: as an
a I/O exten
nsion modu
ule for KT‐61
101; please
select the Function Select switch
h ID to 1. (Itt can play ass a RF master if
(4.2)
further co
onnected to
o the other RF‐Slave
mo
ode EZ Extenders.)
2. RF slave mode:
as an
n wireless RF I/O extenssion module for KT‐610
01;
please select the Fun
nction Selecct swith ID to
o 2 or 3. In this mode,
KT‐6160 plays
as a RFF slave in re
esponse to a RF master.r.
3. RS‐485 Modbus slave
e mode: the
e KT‐6160 EZ‐extender
r can play ass a
RS‐485 Modbus slavee devices. Please selectt the Funtio
on Select sw
witch
ID to 4. 5. 6 or 7. Thee ID is also the device id
d for the mo
odbus proto
ocol.
As the KT‐610
01(Smart IO
O controller)) and the KTT‐6160 (EZ‐EExtender) caan
bee connected
d as through
h wired‐line and RF wirreless. The m
maximum I//O
po
orts used in the controll block logicc are show as
a followed..
I/O portts configuraation for SIO
O and EZ‐exttender
For the way to
o program the
t control block logic for EZ‐Exteder, please
reffer to the usser manula of KT‐6101
1 Smart IO Controller.
KT‐6
6160 EZ Exteender UM
Federal Communications Commission
NOTE: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to pro-vide reasonable protection against harmful interference
when the equipment is operate din a commercial environment. This
equipment generates, uses, and can radiate radiofrequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate
this equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Professional installed device must not be distributed through retail store.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
KT‐6160 EZ Extender UM

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2014:10:07 11:30:20+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2014:10:07 13:34:29+08:00
Metadata Date                   : 2014:10:07 13:34:29+08:00
Format                          : application/pdf
Title                           : Microsoft Word - KT-6160-UserManual-EN-1.0 _FCC_
Creator                         : TracyTing
Document ID                     : uuid:009f2246-8f4d-4fe9-a4a3-643fbcd0bf16
Instance ID                     : uuid:1a5f2550-4656-40e3-b77e-874fd0bdadea
Page Count                      : 8
Author                          : TracyTing

EXIF Metadata provided by EXIF.tools