Ki Ryung Electronics CALYPSO Satellite Radio Receiver User Manual Sportster User Guide 120204

Ki Ryung Electronics Co., Ltd. Satellite Radio Receiver Sportster User Guide 120204

Users Manual

CALYPSO Manual Jan. 19, 2005
2 Front Button description Channel up/down Encoder Knob and Select Button: The Channel up/down encoder knob is the primary control for navigating through the various lists and option menus available on the unit. In the default mode, the Channel up/down knob provides sequential tuning through the available program streams. Turning Channel knob clockwise is tunes up one stream-per-detent, while turning Channel knob counterclockwise is tunes down one stream-per-detent. When in the list mode, turning knob is scrolls down and up, respectively, through the various menus and lists. The current selection from the list will be highlighted on the display. When the item is highlighted, press the Select Button to enter the selection. Pressing and holding the Select button will tune to the previously selected stream. Category Buttons: The Up or Down category buttons allows the user to advance through the stream groups based on content category. By turning Channel knob, the user can then scroll up or down through the streams within that category. Once a choice has been made, it can be entered by pressing the Select Button. Memory (MEMO) Button (S-SEEK Function): This feature allows the user to capture and store the current program data information 3-DIGIT STREAM NUMBER 8-CHARACTER CATEGORY NAME AUTO SIZING/SCROLLING SONG TITLE AUTO SIZING/SCROLLING ARTIST NAME STREAM NAME BAND/PRESET BANK NUMBER CLOCK SIGNAL STRENGTH INDICATOR Default LCD Display
3(Stream Name & Number/ Artist & Song title). You can store up to 20 Artist/Song Title combinations. The Shuttle also has the capability to search the current incoming Sirius signal, and thereby alert you if it matches the Artist/Song title stored in Shuttle memory. Display (DISP) Button: This button allows the user to choose one of several ways of presenting the Stream Name, Artist and Song title information on the LCD screen. Menu (MENU) Button: The MENU Button is used to access Menu Options which displays the user setup menu, plus other feature/ function adjustments. Band Button (BAND)/Preset Tune (P. TUNE): Each momentary press of the BAND Button allows the user to switch between 3 bands of Stream presets (10 presets each A, B and C). Pressing and holding the BAND Button for 2 seconds initiates preset tuning that will display and tune all stored preset streams in sequence. This is indicated by the reverse image of the stream number and band preset number on the display. Pre-set tuning continues until the user decides to terminate this function by pressing and holding the BAND Button for 2 seconds. Keypad Buttons 0-9: These buttons are used to directly enter a desired stream number. They are also used when entering and recalling preset stream numbers into memory. Power Button : Turns Receiver ON and OFF. Jump(JUMP) Button: Used to quickly switch to a favorite channel then back to the original program. Remote Button description Mute Button: Mutes audio. Previous(PREV) Button: Use to tune the previous channel. Direct(DIRECT) Button: Use to tune the channel directly.
Display ButtonPressing the DISP button from the Default displaytoggles between the artist name/song title and largecharacter displayed text. In doing so, this willchange the character size and cause the field toscroll. This feature is useful when viewing thedisplay at a distance.NOTE: The displayed text will scroll only if thelength of the artist or title cannot be viewed in itsentirety.Pressing and holding the Display button will enterthe channel list mode.Pressing DISP will switch between these two display viewsChanging ChannelsTurning the Rotary Knob clockwise will increase, ormove up to the next channel. Turning the RotaryKnob counterclockwise will decrease, or move downto the previous channel.ChannelNameAuto Sizing/ScrollingArtist NameClockBand/PresetBank NumberDefault Screen3-DigitChannelNumberAuto Sizing/ScrollingSong Title8-CharacterCategoryNameBasic OperationAfter you have successfully activated your SIRIUSsubscription, the Normal Operation (Default ) screenwill appear (Below): Use the Rotary Knob to selectchannels.• The selected channel will automatically startplaying. The name and artist of the currentlyplaying song will scroll across the display.Signal StrengthMeter
Searching Channels (Channel List Mode)It is possible to search for a different channel whilelistening to your current channel. Be sure that thedisplay shows the Default screen prior to thefollowing steps:1. Press and hold the DISP button for 2 seconds toactivate the Channel List Mode (top right). TheChannel List screen will appear, showing allavailable channels regardless of category:• Pressing the DISP button while in the ChannelList Mode will change between Channel Name,Artist Name (middle right), and Song Title(bottom right). You can use this feature tosearch for a specific Artist or Song that may beplaying at the time.2. Turn the Rotary Knob to find the channel you want.Search Modes (Category, Channel, Artist,Song Title)The Sirius Sportster Receiver has four ways tosearch for and select music: by category, by channel,by artist, and by song title.Searching CategoriesIf you want to listen to a different entertainmentcategory, push the CATEGORY buttons to activatethe Category Select screen (top right):1. Use the CATEGORY buttons to scroll through musicand entertainment categories.2. When the category (ex. Rock) you want is displayed,use the Rotary Knob to search available channelswithin the category.• Pressing the DISP button while in the CategorySearch mode will change between Channel Name,Artist Name, and Song Title to be able to previewwhat is playing on other channels before selecting.3. When the channel you want is highlighted, press theRotary Knob. The channel will change and thedisplay will revert to the Default screen for the newchannel.To exit this mode without changing to a new channel,press and hold the DISP button for 1 second.
Press and Hold theDISP button to enterthe Channel ListModePress DISP again toshow the Artist NamePress DISP again toshow the Song TitlePress DISP again to goback to Channel List3. Press and release the Rotary Knob to select thechannel. To exit this mode without changing to anew channel, press and hold the DISP button for1 second.Note: If you are in Channel List Mode and viewinga sports category channel list (NFL Zone, NHLZone), pressing the DISP button will togglebetween the team names and the current score ofany live play-by-play game.Direct TuningChannels can be directly accessed by pressing andreleasing the Rotary Knob and then using the 0-9keys to enter the desired channel number. Oncethe desired number has been entered, the channelwill change and the display will revert to the Defaultscreen for the new channel. The receiver willchange immediately if three numbers are entered(ex. “0”, ”0”, “7”), but if just one or two digits areentered, the unit will wait for 3 seconds beforechanging the channel.
Setting Channel PresetsYou can store up to 30 of your favorite channels aspresets, for quick access. Presets are stored in 3banks, A, B & C, each containing 10 channel presets.1. Press the BAND button to activate the preset bankyou want. The selected bank is shown in the lowerright corner of the Default screen.2. Select the channel you want to preset (see BasicOperation and Changing Channels on page 9).3. Hold the numbered preset button you want to storethe channel in for at least 2 seconds.• The selected preset number will flash and thenremain lit on the display to show that it has beenmemorized.• If the preset button already has a channel stored init, it will be replaced by the new channel.Recalling Channel PresetsThe 10 presets in the active bank (A, B or C) can beselected by pressing the “0” – “9” buttons.1. Press the BAND button to activate the preset bankyou want. The selected bank is shown in the lowerright corner of the Default screen.2. Press the desired preset button “0” – “9” to recall thepreset. The channel will change and the display willrevert to the Default screen for the new channel.Jump Preset ButtonThe Sirius Sportster Receiver includes a specialpreset button labeled Jump. It can be used forchannels that are accessed frequently andtemporarily such as traffic, weather, news or sports.This button allows you to quickly tune to one specificchannel and then tune back to the original channel. Ifthe Jump button is used for a traffic channel, theReceiver will automatically display alerts when yourselected city’s traffic report is broadcast.Refer to the Jump Settings options section forinformation on configuring your Jump preset button.
• If your Jump Setting is set to traffic, pressing theJump button will immediately begin searchingfor your desired city’s traffic report. The bandindicator on the display will change to the Jumpicon to indicate a Jump search is active. Onceyour local traffic is found, the Receiver willautomatically tune to that channel. You mayhave to wait up to 4 minutes for your desiredreport. Pressing the Jump button while thereceiver is searching will cancel the search.Pressing the Jump button after the receiver hastuned to your traffic report will return to theprevious channel.• If your Jump Setting is set to JumpSet, pressingthe jump button will immediately tune to yourdesired channel. Pressing the Jump buttonagain will return to the previous channel.Note: The channel preset for the Jump buttonremains the same regardless of which presetbank is currently selected.Searching for a Channel Preset (P.TUNE Mode)It is possible to quickly search through all of yourpresets using the Rotary Knob.1. Press and hold the BAND button to enter thePreset Tune Mode (P.TUNE).2. The bottom right portion of the display will changeto highlight the current preset.3. Turn the Rotary Knob in either direction to moveup or down through your presets. The newchannel will start to play as soon as you stopturning the Rotary Knob.• Only stored presets will be displayed, regardlessof what bank they are stored in.• Presets will be grouped and displayed by presetbank and number (ex. A-1, A-2...B-1, B-2...C-1,C-2...) and rotate all the way around back tothe beginning.
Default DisplayPreset Tune List ModeIn Preset Tuning Mode you can view your list ofpresets showing Channel Name, Artist Name, orSong Title just like in the Channel List Mode:1. Press and hold the BAND button to enter the PresetTune Mode (P.TUNE).2. Press the DISP button for 2-seconds which will bringup the Preset Tune List Mode displaying up to 6preset channel names.• Pressing the DISP button while in this mode willchange between Channel Name (right top), ArtistName (right middle), and Song Title list modes(right bottom)• The name field will scroll only if the length of theartist or song title cannot be viewed in its entirety.3. Use the Rotary Knob to select the desired preset.4. Push and release the Rotary Knob to select thepreset. The channel will change and the display willrevert to the P.TUNE Display.P.TUNE DisplayTo exit Preset Tune Mode and return to ChannelTuning Mode, press and hold the BAND button.
P.TUNEChannel NameList DisplayP.TUNE ArtistName ListDisplayP.TUNE SongTitle ListDisplayMemory (MEMO) and Song Seek (S-Seek)FunctionsThis feature allows the user to capture and storeinformation about the programming (Artist/Song,sports team, or traffic city) on the currently tunedchannel, up to a total of 20 listings. The receiveralso has the capability to continuously search allincoming SIRIUS channels and alert the user whena saved program is being played. When a team (orteams) are stored in memory, at the time receiver isinitially powered on, you will be alerted when theteams are playing in a game being broadcast. Also,while listening to your SIRIUS receiver, should one ofthe teams begin to play a game, you will alerted.Storing Song Titles or Sports Games1. Song Titles or Traffic City: While the receiver isin the default display mode, momentarily pressingand releasing the MEMO button stores the currentprogram data information within the receiver’smemory. A “Stored” pop-up screen, followed by“X Used/Y Empty” will each appear for 1 second,X being the total number of listings saved in
memory, and Y being the total number of memorylistings still available for storage. 2. Sports Games: If the current tuned channel is anNFL®, NBA®, NHL®, or College play-by-play sportsbroadcast, pressing the MEMO button will allowyou to select one of the teams playing to be storedin memory.Turn the Rotary Knob to highlight the team youwish to store in memory and press the RotaryKnob to select. The next screen will ask whichkind of alert you wish to have.Initial Game AlertScore Updates“Initial Game Alert” will sound an alert when theteam you have chosen is playing a game. “AllScore Updates” will sound an alert when the teamyou have chosen is playing a game, and also whenthe scores are updated for the team.Turn the Rotary Knob to highlight the team youwish to store in memory and press the RotaryKnob to select.3. If the MEMO button is pressed and all of thememory spaces are full, “S-Seek Full” will flash onthe display for 1 second.
A screen displaying the Replace-Cancel optionswill follow.This prompt allows you to make the followingReplace-Cancel choices:Replace: The list of stored memory items willappear.Turn the Rotary Knob to choose the item thatyou would like to overwrite with the new Artist/Song Title, sports game, or traffic city. Afterhighlighting the selected item in the list, press theRotary Knob to delete the stored Artist/SongTitle, sports team, or traffic city and replace itwith the updated information. The display will showthe “Stored” screen.Cancel: The Replace-Cancel prompt screen willdisappear and revert to the original screen.Nothing will be stored.
Viewing Program Information stored in Memory1. Press and hold the MEMO button for 3 seconds toenter S-Seek Mode. The program informationstored in memory will be displayed one-at-a-timein page format.2. Use the Rotary Knob to scroll through the 20-pagelisting. This function allows you to reviewpreviously stored program information.Deleting a Song Title Stored into Memory1. Press and release the Rotary Knob while in S-Seek Mode. A pop-up screen displaying twoselectable options - “Delete” and “S-Seek” - isdisplayed.2. Turn the Rotary Knob to highlight the “Delete”option.3. Press the Rotary Knob and a Delete confirmationscreen will appear.4. To permanently delete the program from your list,select “Yes” using the Rotary Knob and press theKnob in to confirm.
Activating the Song (S-Seek) Alert1. Press and hold the MEMO button for 3 seconds toenter the S-Seek Mode.2. Press and Release the Rotary Knob. A pop-upscreen displaying two selectable options -“Delete” and “S-Seek” will appear (below left).3. Use the Rotary Knob to highlight the “S-Seek”option.4. Press and release the Rotary Knob and a S-Seekconfirmation screen will appear. Select the “Yes”option using the Rotary Knob and press the Knobin to confirm (below right).Whenever the Sirius Sportster Receiver is turnedon, it automatically searches the incoming channelsto determine if a match exists with the programinformation stored in receiver’s memory. If one ormore matches are found, a pop-up screenmomentarily appears for 2-seconds and displays“S-Seek Alert”. An audible beep tone will beheard indicating that a match has been found. Thedisplay then reverts to the S-Seek Alert screen whichdisplays the current matches. You can now select theArtist/Song Title or game that you wish to listen to.No stored match alert is provided for the currentlyselected channel. To ensure that no duplicate entriesare stored in memory, the Receiver will check thestored input data to ensure the information about tobe stored is not already in memory. • If one or more matches are found, a list appears.You can scroll through the list and select aprogram using the Rotary Knob. Your selection willbe tuned and the display will revert to the lastactive display mode. • If a selection is not chosen within 10 seconds, thescreen will revert to the last active display andtuning modes.NOTE: Play of the current selection will continueuntil a new selection is made.
Game AlertThe Sirius Sportster Receiver can automaticallyidentify when your favorite team is playing. When agame is found, the Game Alert screen is displayed,followed by tuning information for that game. Usethe Rotary Knob to select and tune to the desiredchannel.See the Game Alert setting in the Menu DisplayOptions section for information on setting yourfavorite team.You can use the S-Seek feature to add Game Alertsfor additional teams. See the Setting S-Seek Alertssection for more information.Menu Display OptionsTo enter the Menu Options page, press and releasethe MENU Button. The “Menu Options” list willappear on the display (below).Using the Rotary Knob, highlight the option you wishto adjust and press the Knob. The following optionsare available:Sirius ID Lock OptionsGame Alert Audio LevelJump Settings Antenna AimingDisplay Settings Memory OptionsConfirm Tone Options Time Based FeaturesFM Transmitter Factory DefaultAdd or SkipNote: If a button is not pressed within 10 seconds, theReceiver will exit the “Menu Options” function andrevert back to the Default screen display.Menu OptionsSirius IDGame AlertJump SettingsDisplay SettingsConfirm Tone Options
Sirius IDDisplays your 12 digit Sirius ID (SID) number. TheSID is unique to every Sirius Sportster Receiver andis required to activate your service. It isrecommended that you write this number in thespace provided on the last page of this user guide.No adjustments are allowed in this mode. To exit thisoption, press the Rotary Knob or Menu Button.Game AlertGame Alert allows you to store your favorite sportsteams in memory. The Sportster Receiver willconstantly scan the SIRIUS channels and will soundan alert when a team you stored in memory isplaying, or when there is a score update for a team,depending on which option you have chosen for theteam.Teams which you have selected and are currentlyplaying will be displayed in a category called “MyGame Zone”.You may select one team from each sports leagueand the college category, however, more teams maybe chosen by using the MEMORY (MEMO) function.(See the section titled, “Memory (MEMO) and SongSeek (S-Seek) Functions” for more information toadd additional teams.)To choose teams to add to your stored game alerts:1. Turn the Rotary Knob to highlight “Game Alert”and press the Rotary Knob to select.2. Turn the Rotary Knob to highlight the sportsleague or college category of the team you wish toadd, and press the Rotary Knob to select.
NFLNBANHLGame Alert3. Turn the Rotary Knob to highlight the league teamname or college team name you wish to add, andpress the Rotary Knob to select.Anaheim Mighty DucksNoneNHL Atlanta ThrashersNoneCOLLEGEColoradoAuburnNote that for college teams, you will receive analert for all teams playing for that college. Thereare 30 college teams currently licensed forbroadcast by SIRIUS.4. Turn the Rotary Knob to highlight which type of analert you want, and press the Rotary Knob toselect.Alert TypeInitial Game AlertAll Score UpdatesWhen the SIRIUS receiver is powered on, andwhile it is playing, “Initial Game Alert’ will soundan alert when the team you have chosen is playinga game. “All Score Updates” does the same butalso sounds an alert when the scores are updatedfor the chosen team.To exit the Game Alert menu, press the MENUbutton.
Jump SettingsYou can access the Jump Settings menu bypressing and holding the Jump button for 2seconds or by pressing Menu to enter the MenuOptions list and selecting Jump Settings using theRotary Knob.There are two options available for Jump buttonsettings – Traffic and JumpSet. The currentlyselected option is indicated by a jump icon.1. Traffica. Use the Rotary Knob to highlight the “Traffic”option. Press the Rotary Knob to select.b. Scroll to the city for which you would like to heartraffic reports and press the knob.Use the Menu button to exit this menu withoutchanging your current city selection.Note: If the channel list has not yet beendownloaded from the satellite data stream, anUpdating City List notification will be displayed.Please wait 10 minutes and try again.Menu OptionsSirius IDGame AlertJump SettingsDisplay SettingsConfirm Tone Options
1. JumpSetSelect JumpSet if you would like to use the Jumpbutton for any channel other than a traffic channel.a. Use the Rotary Knob to highlight the “JumpSet”option. Press the Rotary Knob to select.b. After pressing Menu to exit to the DefaultScreen, the Jump button can be programmedby tuning to your desired channel and pressing& holding the button for 2 seconds, asdescribed in the Setting Channel Presetssection.Display SettingsThe following adjustments are possible:Contrast ControlDimming ControlManualAutomaticFont TypeTo enter any of these modes, use the Channel knobto highlight the option you wish to adjust and pressthe Select button. The automatic dimming functionis enabled when Automatic is selected. Also the automatic dimming function is disabled when Manual is selected.
To exit the Display settings, simply push theMENU button.Confirm Tone OptionsThe Sirius Sportster Receiver will sound an Audio“Tone” alert when the unit powers ON and OFF aswell as when the S-Seek Alert is activated. Thedefault is ON. To change the tone options, performthe following:1. Use the Rotary Knob to highlight the “ConfirmTone Options”. Press the Rotary Knob to select.2. Use the Rotary Knob to Select “ON” or “OFF”.Press the Knob to set the Tone Option.To exit the Display settings, simply push theMENU button.FM Transmitter OptionsIf you would like to use the built-in FMTransmitter, you must turn ON the function andselect an FM frequency:1. Use the Rotary Knob to highlight the “FMTransmitter Options”. Press the Rotary Knobto select.2. Use the Rotary Knob to Select “On/Off”. Pressthe Knob to set the option.3. Press Menu to return to the previous menu.4. Use the Rotary Knob to highlight the“Frequency Selection”. Press the Rotary Knobto select.5. Use the Rotary Knob and Category Buttons toadjust the FM frequency. The Rotary Knobadjusts in 0.1 MHz increments and the CategoryButtons adjust in 1 MHz increments.
Channel Add or SkipThe Sirius Sportster Receiver will allow you to skipselected channels when changing channels viathe Rotary Knob. At any time you may select toadd or skip specific channels. While in the “MenuOptions” List mode, follow the steps below to Addor Skip a channel1. Use the Rotary Knob to highlight the “Add orSkip”. Press the Rotary Knob to select.2. Use the Rotary Knob to Select the channel youwish to skip or add. Pressing the Rotary Knob willadd the text “Skip” next to the channel name toskip that channel. To add the channel, simplypress the Rotary Knob and the text “Skip” will beremoved.Note: This feature only functions in normalchannel search modes. You can always accessany skipped channel using the Direct Tuningfunction.Lock OptionsThe Sirius Sportster Receiver has the ability tolockout the use of any channel, or channels you donot want others to access without your permission.Like the Skip feature, the locked channel will notappear when the user changes channels with theRotary Knob. When the user tries to access thelocked channel using the Direct Tuning function, the“Enter Code” screen will be displayed and thechannel will not be accessed until the proper code isentered.While in the “Menu Options” List mode, follow thesteps below to Lock a channel:1. Use the Rotary Knob to highlight the “LockOptions”. Press the Rotary Knob to select.2. Select “Lock/Unlock” from the Lock Options Menu(below left) and press the Rotary Knob to select.3. Use the Rotary Knob to select the channel you wishto lock. Press the Knob in to select (below right).
Changing the Lock/Unlock CodeThe first time the Lock/Unlock function is accessed,the user must enter the default lock code. Thedefault lock code is “0000”. This code can bemaintained or changed. To change the default lockcode, perform the following procedure while in the“Menu Options” List mode:1. Use the Rotary Knob to highlight the “LockOptions”. Press the Rotary Knob to select.2. Select “Edit Code” from the Lock Options Menu(below left) and press the Rotary Knob to select.3. Enter the default code “0000”.4. The “New Code” prompt will appear. Enter your newfour digit code using the 0-9 number buttons (belowright). You will then be prompted to confirm the newcode by entering your code again.5. The lock code is now changed.Note: you can use this same method to Edit thecode once it is changed from the default.Audio LevelThe audio output of the Sirius Sportster Receivercan be adjusted to fine-tune the audio signal levelfor maximum performance. This is important whenusing either the optional Home Docking Station orthe optional Mobile Docking Station. The followingsetting affects both the line output and FM outputlevels. To change the Audio Level, perform thefollowing procedure while in the “Menu Options”List mode:1. Use the Rotary Knob to highlight the “Audio LevelOptions”. Press the Rotary Knob to select.2. Use the Rotary Knob to adjust to the desired audiooutput level. A 10 segment horizontal bar graph isdisplayed with a “-” sign to the left and a “+” sign tothe right. To store your setting and exit thisfunction, press the Rotary Knob.
Antenna AimingWhen using the optional Home Docking Station orthe Boombox indoors, it is important to locate theantenna in an acceptable location (See theindividual installation guides for more information).1. Use the Rotary Knob to highlight “AntennaAiming”. Press the Rotary Knob to select.2. Two 10 segment horizontal bar graphs will bedisplayed ( SAT and TER) with a “-“ sign to the leftand a “+” sign to the right. SAT indicated satellitesignal and TER indicates terrestrial signal – ifavailable.3. Adjust the antenna for maximum performance asper the manuals.To exit this function, press the Rotary Knob orMENU button.Memory OptionsIn this mode, the user can turn the MemorySearch Function (S-Seek) ON or OFF. In addition,all 30 Preset Memory Locations can be cleared.To change the Memory Options, use the followingprocedure while in the “Menu Options” Listmode:1. Use the Rotary Knob to highlight the “MemoryOptions”. Press the Rotary Knob to select.2. Select one of the following Memory Options:a. Automatic Memory Search function - On orOff: Use the Rotary Knob to select between Onand Off by highlighting the desired selection.Then press the Rotary Knob to store.b. Clear All Memory Locations: Press andrelease the Rotary Knob; a prompt displayscreen appears confirming - Clear All MemorySelect “Yes” or “No” and press the RotaryKnob.To exit this function, press the Rotary Knob orMENU button.
• Time Zone: Since the Clock adjusts the timeautomatically, it is important to specify your propertime zone. Use the Rotary Knob to select theproper time zone. The following is a list of timezones available:(GMT-9:00) Alaska(GMT-8:00) Pacific(GMT-7:00) Mountain(GMT-6:00) Central(GMT-5:00) Eastern(GMT-4:00) Atlantic(GMT-3:30) Newfoundland (Abbreviated asNewfndlnd)• Daylight Savings Time (DST) Observance:Activate this function if your area is subject toDST; turn the Rotary Encoder to toggle betweenDST Observed (default) or DST Not Observed.b. Alarm Clock: When this menu option ishighlighted and selected, you will be able to setthe unit to turn on at a specific time. The lastselected channel prior to shutdown will be presentwhen the Alarm feature is activated. Alarmappears on the first line of the display followed bythe alarm options:Time-Based FeaturesThis Menu Option allows for adjustments of thefollowing items:Clock Auto ShutdownAlarm Clock Sleep ModeProgram AlertTo change the Time-Based Features, use thefollowing procedure while in the “Menu Options”List mode:1. Use the Rotary Knob to highlight the “Time-Based Features”. Press the Rotary Knob toselect.2. Use the Rotary Knob to select one of the followingTime-Based Features to adjust:a. Clock: When entering this menu option, youcan setup the clock shown on the defaultdisplay, based on the format desired, and thetime zone in which you reside. The clock data isprovided via the Sirius Satellite data stream, andwill update based on the received signal. • Format: The Clock Format option allows foreither 12 Hour (Default), or 24 Hour display.
• Set Alarm: Use the Rotary Knob to select “SetAlarm” From the Alarm Clock Menu. Selecteither “Alarm Off” (Default) or “Alarm On” fromthe Menu and press the Rotary Knob to set.• Alarm Time: Use the Rotary Knob to select“Alarm Time” from the Alarm Clock Menu. Usethe Category buttons and the Rotary knob toset the time (hours, minutes) you want toactivate the Receiver (Default is 12:00pm).Press the Rotary knob to store the Alarm Time.c. Program Alert: When this menu option ishighlighted and selected, you will be able toprogram the unit to switch to a selected channelat a specific time. Press the Rotary Knob toenter the Program Alert Menu, The followingadjustment options are available:• Program Time/Day: Turning the Rotary Knobtoggles between Time and Day. If Time isselected, use the Category buttons and RotaryKnob to set the hours and minutes. AM or PMwill switch automatically when the AM or PMthreshold has been exceeded. When thedesired time is displayed, press the Rotary Knob. If Day is selected, the screen displays adefault day of Monday, with selectable choices ofMonday, Tuesday, Wednesday, Thursday,Friday, Saturday or Sunday. Use the RotaryKnob to increase (CW) or decrease (CCW) thedesired day in a circular motion (default value:Monday).• Channel: Turn the Rotary Knob to scroll through alisting of all the Sirius channels. When thedesired channel is highlighted, press the RotaryKnob.• Program Alert On/Off (Default is Off): Rotate theRotary Knob to toggle between Program AlertOn or Program Alert Off. When the desired alertstatus is highlighted, press the Rotary Knob.d. Auto Shutdown: You can program the unit toautomatically shut off after a 1-hour period withoutany user intervention. After 59 minutes ofinactivity, a beep tone sounds and a displayprompt appears on the screen, “Cancel AutoShutdown”. To activate the Auto Shutdownfeature, use the Rotary Knob to select it from theTime Based Features Menu and press the Knob
Factory DefaultThis Menu option will restore all original factorysettings. To activate this feature, perform thefollowing procedure while in the “Menu Options”List Mode:1. Press Menu to enter the Menu Options List.2. Use the Rotary Knob to highlight the “FactoryDefault” option. Press the Rotary Knob to select.“Restore Settings” will pop up on the Receiver’sdisplay.3. Use the Rotary Knob to select “Yes” to restore allsettings or select “No” to return to the MenuOptions List Mode.Use the Rotary Knob to select the desired SleepTime. When the desired time is highlighted,press the Rotary Knob. The Receiver will nowturn off after the selected time has elapsed. to enter the menu. Once in the Auto ShutdownMenu, use the Rotary knob to select either“Enable” or “Disable” the feature.• Cancel Auto Shutdown: If you want totemporarily deactivate the Auto Shutdownfeature once the beep tone sounds, press theRotary Knob. The Auto Shutdown sequence willreset to 1 hour.e. Sleep Mode: You can program the unit toshutdown after a selected period of time. Thescreen displays Sleep Mode on the top line, withoptional time settings as follows:Sleep Off15 Minutes30 Minutes45 Minutes60 Minutes
If “Yes” is chosen, the unit reverts to the originalfactory settings for the following parameters:• All Presets revert to empty• All Game Alerts Cleared• Auto Dimming On• Display Contrast to 50%• Display Mode to Auto• FM Modulator to On• FM Frequency to 88.1 MHz• Audio Output Level to 70%• Access to all skipped Channels (Lockedchannels remain locked)• Memory Search On• Memory Locations are erased• 12 Hour Clock Format• Eastern Time Zone• Daylight Savings Time Observed• Alarm Off• Program Alert Off• Auto Shutdown Off• Sleep Mode Off

Navigation menu