Kid Galaxy V039-2G4R 20V RC EPIC CLIMBER User Manual 10318 KG 20V Jeep US IM 11x17 V2 20180518 CS6
Kid Galaxy Inc. 20V RC EPIC CLIMBER 10318 KG 20V Jeep US IM 11x17 V2 20180518 CS6
User Manual
Item number.: 10318 CONTROLLER: FORWARD/REVERSE 1. Pull inward on lever of transmitter to propel vehicle forward. 2. Release lever to neutral position to allow car to stop. 3. Push outward on lever of transmitter to propel vehicle in reverse. 4. Avoid moving lever inward or outward without allowing vehicle to come to a complete stop. QUICK START GUIDE FORWARD POWER ON FORWARD CHARGE THE BATTERY REVERSE The included charger is designed to charge the included 20V battery. Allow for at least a 3 hrs and 45 mins charge before use. Alternatively, you can use any fully charged 20 volt compatible battery from Black & Decker, Dewalt, Porter-Cable, or Stanley. Many 20V batteries from these manufacturers that are under 3.0Ah should fit. REVERSE CONTROLLER: TURNING TURN LEFT Turn wheel to change direction while traveling. TURN LEFT TURN RIGHT TURN RIGHT CONTROLLER BATTERY INSTALLATION Install included AAA batteries into controller. 1. Attach the charger to the 20v battery. 2. Plug charger in wall. 3. Battery is charging and shows level of charge as lights blink. Fully charged when lights are solid. CHARGE TIME: 3 hours and 45 minutes UNLOCK VEHICLE SURFACE Remove vehicle surface locks/pins. To re-attach body, push pins all the way to lock body in place. POST RACE Turn vehicle off. Disconnect battery from vehicle and remove it. Turn transmitter off. Live to race another day. WARNING: HIGH PERFORMANCE MOTOR Do not overload the motor in branches, sand, mud, swamps, etc. that prevent the car from moving and creates extra work for the motor. When car is stuck, avoid running the motor repeatedly. Walk to vehicle (sorry) and remove the vehicle from the obstacle. FORWARD ALLOW MOTOR TO COOL PROLONGS MOTOR LIFE Periodically, allow the motor and battery to cool between races. Use of a higher amperage battery requires intermittent breaks. If the motor is very hot to the touch, discontinue use until the motor has cooled. BATTERY USE Included battery should be charged only with included charger. Use of compatible 20 volt batteries that fit is encouraged, and these batteries should only be charged with their respective charger. Flip battery connecter mechanism as it does not lock into place. If not aligned, battery cannot be installed. SAFETY FIRST You are the owner of an extremely powerful radio control product. Use with care to avoid product damage or personal injury. LOAD THE BATTERY RELEASE BATTERY Press the lock at the end of the battery to release from the car. Push until “CLICKS” EXTREMELY POWERFUL VEHICLE. ONLY USE OUTDOORS IN LARGE, OPEN AREA. CAN BE USED ON AREAS WITH SHORT GRASS, SMALL ROCKS, DIRT AND SAND. TROUBLESHOOT HELP. CALL US! 1-800-816-1135 or email: customerservice@kidgalaxy.com Examine battery charger regularly for any damage to cord, plug, enclosure, and other parts. In the event of such damage, discontinue use until repaired. ROTATE ADAPTER/ALTERNATE BATTERY INSTALLATION TURN ON/ADJUST VEHICLE Black & Decker ™, Stanley Fat Max®, or Porter Cable®. Make sure all motors are functional and car can turn left/right. Front wheels should face forward and if not, adjust steering trim until they point forward. Always turn on transmitter before turning on vehicle. LED on transmitter will illuminate. Adapter is aligned for included battery and power packs from 1. Align arrows. 2. Load battery. 1 Turn to “ON” position 2 Turn to “ON” position Just flip adapter for use with TROUBLESHOOT TIPS DeWalt® power packs. 1. Align arrows. 2. Load battery. 1. If the vehicle is not moving, turn the “ON/OFF” switch on the CONTROLLER and the VEHICLE to the “OFF” position. Powering down for 10 seconds for reset purposes. 2. Turn both power switches to “ON” again to play. CONTROLLER TRIM ADJUSTMENT Before each use - adjust the trim adjustment knob so that the front wheels are rolling in a straight line Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The battery adaptor does not lock into place. Alignment critical for proper battery installation. Black & Decker ™, Stanley Fat Max®, Porter Cable®, DeWalt® are trademarks of Stanley Black & Decker, Inc. 20V Power Drive is not manufactured or distributed by Stanley Black & Decker, Inc. POWER ON TURN LEFT POWER OFF TURN RIGHT BACKWARD FORWARD TURN WHEELS MORE TO THE LEFT TRIM KNOB TURN WHEELS MORE TO THE RIGHT
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Format : application/pdf Title : 10318 KG_20V_Jeep_US_IM_11x17_V2_20180518_CS6 Metadata Date : 2018:05:18 18:12:11+08:00 Modify Date : 2018:05:18 18:12:11+08:00 Create Date : 2018:05:18 18:12:11+08:00 Creator Tool : Adobe Illustrator CS6 (Macintosh) Thumbnail Width : 196 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 24350 bytes, use -b option to extract) Instance ID : uuid:e5af30d1-60bb-a344-b9c2-edfde07c2fb5 Document ID : xmp.did:8B5261D24F206811822AC0B1E99B1900 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:8A5261D24F206811822AC0B1E99B1900 Derived From Document ID : xmp.did:8A5261D24F206811822AC0B1E99B1900 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:9ba8d3ef-70d7-4b44-8528-dd237d743b98, xmp.iid:8B5261D24F206811822AC0B1E99B1900 History When : 2017:06:16 11:56:08-04:00, 2018:05:18 18:11:57+08:00 History Software Agent : Adobe Illustrator CC 2017 (Macintosh), Adobe Illustrator CS6 (Macintosh) History Changed : /, / Ingredients File Path : /Volumes/Data/Clients/Kid Galaxy/17_20V_F-150 Power Drive/05_Instructions/02_Linked Images/CAMERA.psd, /Volumes/Data/Clients/Kid Galaxy/17_20V_F-150 Power Drive/05_Instructions/02_Linked Images/ALT BATTERY.psd, /Volumes/Data/Clients/Kid Galaxy/17_20V_F-150 Power Drive/05_Instructions/02_Linked Images/ALT BATTERY.psd, /Volumes/Data/Clients/Kid Galaxy/17_20V_F-150 Power Drive/05_Instructions/02_Linked Images/BATTERY.psd, /Volumes/Data/Clients/Kid Galaxy/17_20V_F-150 Power Drive/05_Instructions/02_Linked Images/BATTERY.psd, /Volumes/Data/Clients/Kid Galaxy/17_20V_F-150 Power Drive/05_Instructions/02_Linked Images/UNLOCK SURFACE.psd, /Volumes/Data/Clients/Kid Galaxy/17_20V_F-150 Power Drive/05_Instructions/02_Linked Images/RECHARGE.psd, /Volumes/Data/Clients/Kid Galaxy/17_20V_F-150 Power Drive/05_Instructions/02_Linked Images/TURNING.psd, /Volumes/Data/Clients/Kid Galaxy/17_20V_F-150 Power Drive/05_Instructions/02_Linked Images/ON_OFF.psd, /Volumes/Data/Clients/Kid Galaxy/17_20V_F-150 Power Drive/05_Instructions/02_Linked Images/FORWARD BACK.psd Ingredients Document ID : adobe:docid:photoshop:29b10ec7-9389-117a-a4aa-b63167cb0496, adobe:docid:photoshop:7d87a781-937b-117a-a4aa-b63167cb0496, adobe:docid:photoshop:7d87a781-937b-117a-a4aa-b63167cb0496, adobe:docid:photoshop:3086e269-937c-117a-a4aa-b63167cb0496, adobe:docid:photoshop:3086e269-937c-117a-a4aa-b63167cb0496, adobe:docid:photoshop:32b6a77c-937b-117a-a4aa-b63167cb0496, adobe:docid:photoshop:a9f38938-937c-117a-a4aa-b63167cb0496, adobe:docid:photoshop:950712f1-9381-117a-a4aa-b63167cb0496, xmp.did:26e930d4-d2a5-402d-bd8f-d2ca02b520b3, adobe:docid:photoshop:950712f1-9381-117a-a4aa-b63167cb0496 Ingredients Instance ID : xmp.iid:8de06a3c-0176-42d3-a35a-492167cf6006, xmp.iid:2b2f244b-5833-450d-b4ab-69de6f165a19, xmp.iid:2b2f244b-5833-450d-b4ab-69de6f165a19, xmp.iid:e8f70f75-9d79-4b4d-8d17-4bf2d583dbe3, xmp.iid:e8f70f75-9d79-4b4d-8d17-4bf2d583dbe3, xmp.iid:735dff63-4952-4c46-acfd-0ea5b4b4ac16, xmp.iid:fa63286a-b7a8-475e-b745-2c3da1fb315b, xmp.iid:6c0c5e0b-1530-4070-a675-0a6309b5e2e6, xmp.iid:67dd3865-dadc-4299-b0a8-32c9ab3da8d0, xmp.iid:24769a3f-0c60-4ca9-99f2-245af42f0dde Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : /Users/vincenttse/Documents/20V IM/10318 KG_20v_Jeep_IM_V1_20180510_FAR/Links/10318 forward n reverse_2018.psd, /Users/vincenttse/Documents/20V IM/10318 KG_20v_Jeep_IM_V1_20180510_FAR/Links/10318 forward n reverse_2018.psd, /Users/vincenttse/Documents/20V IM/10318 KG_20v_Jeep_IM_V1_20180510_FAR/Links/10318 Unlock vehicle surface_A_2018.psd, /Users/vincenttse/Documents/20V IM/10318 KG_20v_Jeep_IM_V1_20180510_FAR/Links/10318 Unlock vehicle surface_B_2018.psd, /Users/vincenttse/Documents/20V IM/10318 KG_20v_Jeep_IM_V1_20180510_FAR/Links/10318 Installing Camera_2018.psd, /Users/vincenttse/Documents/20V IM/10318 KG_20v_Jeep_IM_V1_20180510_FAR/Links/10318 Unload the Battery_B_2018.psd, /Users/vincenttse/Documents/20V IM/10318 KG_20v_Jeep_IM_V1_20180510_FAR/Links/10318 Load Battery_Enlarge A.psd, /Users/vincenttse/Documents/20V IM/10318 KG_20v_Jeep_IM_V1_20180510_FAR/Links/10318 Load Battery_A.psd, /Users/vincenttse/Documents/20V IM/10318 KG_20v_Jeep_IM_V1_20180510_FAR/Links/10318 Load Battery_Enlarge B.psd, /Users/vincenttse/Documents/20V IM/10318 KG_20v_Jeep_IM_V1_20180510_FAR/Links/10318 Load Battery_B.psd, /Users/vincenttse/Documents/20V IM/10318 KG_20v_Jeep_IM_V1_20180510_FAR/Links/10318 ON_OFF_enlarged_2018.psd, /Users/vincenttse/Documents/20V IM/10318 KG_20v_Jeep_IM_V1_20180510_FAR/Links/10318 Load the Battery with hand_2018.psd, /Users/vincenttse/Documents/20V IM/10318 KG_20v_Jeep_IM_V1_20180510_FAR/Links/DC US Charger_2018.psd, /Users/vincenttse/Documents/20V IM/10318 KG_20v_Jeep_IM_V1_20180510_FAR/Links/10318 RC_Ture Straight_2018.psd, /Users/vincenttse/Documents/20V IM/10318 KG_20v_Jeep_IM_V1_20180510_FAR/Links/10318 RC Installing Battery_2018.psd, /Users/vincenttse/Documents/20V IM/10318 KG_20v_Jeep_IM_V1_20180510_FAR/Links/10318 RC_front_2018.psd, /Users/vincenttse/Documents/20V IM/10318 KG_20v_Jeep_IM_V1_20180510_FAR/Links/10318 RC_front_2018.psd, /Users/vincenttse/Documents/20V IM/10318 KG_20v_Jeep_IM_V1_20180510_FAR/Links/10318 RC_front_2018.psd, /Users/vincenttse/Documents/20V IM/10318 KG_20v_Jeep_IM_V1_20180510_FAR/Links/10318 RC_Speed Mode_2018.psd, /Users/vincenttse/Documents/20V IM/10318 KG_20v_Jeep_IM_V1_20180510_FAR/Links/10318 RC_front_2018.psd, /Users/vincenttse/Documents/20V IM/10318 KG_20v_Jeep_IM_V1_20180510_FAR/Links/10318 Unlock vehicle surface_B_2018.psd, /Users/vincenttse/Documents/20V IM/10318 KG_20v_Jeep_IM_V1_20180510_FAR/Links/10318 Bottom of Chasis_2018.psd, /Users/vincenttse/Documents/20V IM/10318 KG_20v_Jeep_IM_V1_20180510_FAR/Links/10318 forward cap_2018.psd Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 1224.000977 Max Page Size H : 792.000000 Max Page Size Unit : Points Font Name : FenixBlackletterCaps-Italic, Helvetica-Condensed-Bold, Helvetica-Condensed-Black, HelveticaNeue-CondensedBold Font Family : Fenix BlackletterCaps, Helvetica Condensed, Helvetica Condensed Black, Helvetica Neue Font Face : Italic, Bold, Regular, Condensed Bold Font Type : TrueType, Open Type, Open Type, TrueType Font Version : April 2012, 001.004, 001.003, 13.0d2e2 Font Composite : False, False, False, False Font File Name : fenix blacklettercaps_it.ttf, Helvetica-Condensed-Bold.otf, Helvetica-Condensed-Black.otf, HelveticaNeue.ttc Plate Names : Cyan, Black, 032C Swatch Group Name : Default Swatch Group Swatch Group Type : 0 Swatch Colorant Swatch Name : White, Black, C=0 M=0 Y=0 K=100, 032C, C=0 M=0 Y=0 K=83 2 Swatch Colorant Mode : CMYK, CMYK, CMYK, RGB, CMYK Swatch Colorant Type : PROCESS, PROCESS, PROCESS, SPOT, PROCESS Swatch Colorant Cyan : 0.000000, 0.000000, 0.000000, 65.291801 Swatch Colorant Magenta : 0.000000, 0.000000, 0.000000, 57.412102 Swatch Colorant Yellow : 0.000000, 0.000000, 0.000000, 54.482300 Swatch Colorant Black : 0.000000, 100.000000, 100.000000, 32.346100 Swatch Colorant Tint : 100.000000, 100.000000, 100.000000 Swatch Colorant Red : 255 Swatch Colorant Green : 0 Swatch Colorant Blue : 0 Producer : Adobe PDF library 10.01 Trapped : False Nrpages : 1 Startlogpage : 1 Units : mm Vsize : 279.4 Hsize : 431.8 Margtop : 0 Margbot : 0 Margleft : 0 Margright : 0 Vshrink : 1.000000 Hshrink : 1.000000 Readerspread : False Screenreg : False Inks Name : cyan Inks Type : process Inks Book : process Inks Egname : cyan Inks Frequency : 120 Inks Angle : 22.5 Inks Dotshape : Inks R : 0 Inks G : 0.680969238 Inks B : 0.938095093 Inks Attribute : normal Inks Printingmethod : unknown Coverage : , , , , , Layers Name : BACKGROUND Layers Printable : True Layers Locked : True Files Instance ID : file://192.168.1.10/Data/Clients/Kid%20Galaxy/17_20V_F-150%20Power%20Drive/05_Instructions/02_Linked%20Images/FORWARD%20BACK.psd Files Rendition Class : image/psd Files Pagenr : 0 Files Type : image Files Count : 1 Pagelist Start : 0 Pagelist End : 0 Pagelist Inks : 1, 2, 3, 4, 5, 6 Fonts Name : Fenix BlackletterCaps Italic Fonts Type : TrueType Fonts Location : local Fonts Fontfile : Fonts Protection : False Page Count : 2 Creator : Adobe Illustrator CS6 (Macintosh)EXIF Metadata provided by EXIF.tools