Kidde Fire Systems Smoke Alarm K 73 06 Users Manual

: Kidde-Fire-Systems Kidde-Fire-Systems-Kidde-Fire-Systems-Smoke-Alarm-K-73-06-Users-Manual-568183 kidde-fire-systems-kidde-fire-systems-smoke-alarm-k-73-06-users-manual-568183 kidde-fire-systems pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

LHS™
Linear Heat Sensor
Effective: March 2013
K-73-06

FEATURES
•
•
•
•
•

Fixed Temperature Digital Heat Detector
Five Alarm Temperatures Available: 142°F - 158°F,
180 °F, 220°F, 350°F, 452°F
Compatible with All Fire Control Panels
Connect Directly to Initiating Circuit
Cost-Effective Solution for Hazardous Locations

•
•
•

Ideal for Use in Applications Where Spot-Type
Heat Detectors are Unsuitable
Fire Zone Location Using LHS with
SmartOne®-compatible panels
FM Approved

DESCRIPTION
The LHS™ Linear Heat Sensor cable is a flexible, durable and cost-effective fixed-temperature fire detector,
suitable for protecting a wide range of commercial and
industrial fire applications.
LHS is a small diameter cable capable of detecting heat
from a fire over its entire length. The sensor cable consists of a twisted pair of 19 AWG copper coated steel
conductors covered by a temperature sensitive insulation, and protected by either a plastic braid or jacket for
various environmental applications.
The LHS Linear Heat Sensor is Factory Mutual Approved
and is designed for open area as well as proximity detection. A wide range of jackets and operating temperatures
are available for proper system design, including confined areas or harsh environments which prohibit the use
of other forms of detection. LHS is compatible with any
fire control panel that is capable of accepting contact closure type initiating devices.

APPLICATIONS
•

Open Area Protection

•

Belt Conveyers

•

Tunnels

•

Aircraft Hangars

•

Cable Trays

•

Floating Roof Tanks

•

Classified Hazardous Areas (when used with intrinsic
safety barriers)

OPERATION
The heat from a fire causes the LHS cable’s special insulation to melt at a specific temperature, allowing the two
conductors to short together, thus creating an alarm condition on the fire control panel. The LHS cable may also
be used as a stand-alone contact device. The LHS normal operating state is an open circuit. For installation
details refer to “LHS Installation Instructions” (73-202).

Conductor
Tinned
copper-covered
steel

Insulation
Temperature-sensitive
thermoplastic or
fluoropolymer

Jacket
Thermoplastic strip
braid, PVC, nylon, or
fluoropolymer

FIRE ZONE LOCATION WITH LHS
An Intelligent Linear Heat Detection System is recommended for applications where fire zone location requires
zone output control for notification appliances, HVAC
control, suppression control and annunciation. In this system, each discrete addressable LHS cable zone will
report an individual alarm to the SmartOne®-compatible
fire control panel.
Addressable LHS cable zones are created by attaching
each LHS cable zone to an Addressable Input module
(P/N 70-407008-001). Each discrete LHS cable zone
location can be displayed on the SmartOne-compatible
panel 80-character LCD display with programmable text
zone description. Up to 255 devices (any mix of devices
including smoke detectors, manual pull stations, waterflow switches, LHS zones, etc.) can be connected to a
single SmartOne-compatible’s addressable loop.
Installing an Intelligent Linear Heat Detection System
results in substantial installation cost savings over traditional hard-wired linear heat detection systems.

Table 1: LHS Sensor Cable Specifications
Part Number:
656 ft (200 m) length roll
3,280 ft (1000 m) length roll
Alarm Temperature Range

73-200000-011
73-201000-011

73-200000-012
73-201000-012

73-200000-003
73-201000-003

73-200000-004
73-201000-004

73-200000-005
73-201000-005

145-158ºF
(63-70ºC)

180ºF
(82ºC)

220ºF
(105ºC)

350ºF
(177ºC)

452F
(233ºC)

Up to 221ºF (105ºC)

Up to 392ºF (200ºC)

Ambient Storage Temp.*

Up to 113ºF (45ºC)

Min. Installation Temp.

5ºF (-15ºC)

Min. Operating Temp.**

-40ºF (-40ºC)

Application

Indoor/Outdoor

Up to 158ºF (70ºC)

32ºF (0ºC)

Indoor/Outdoor

Approved Spacing

Indoor/Outdoor

Indoor/Outdoor

Indoor/Outdoor

12 seconds (max)

Nylon

Nylon

Outer Jacket Color

Black
Marked H8040N

Black
Marked H8045N

Conductor Insulation

20 seconds (max)
PVC

EVA

0.13 in. (3.35 mm)

0.13 in. (3.35 mm)

Electrical Rating

FEP

Black

Red

Polythene

Polypropylene

FEP

1 Black
1 Black/White

1 Black
1 White

0.17 in. (4.35 mm)

0.14 in. (3.5 mm)

1 Black
1 Red

Conductor Color

0.17 in. (4.35 mm)

30.48 ohms/1000 ft. @ 68ºV (100 ohms/1000 m) @ 20ºC
20.21 pF/ft.
(66.32 pF/m)

Insulation Rating

25.42 pF/ft.
(83.31 pF/m)

19.96 pF/ft.
(65.48 pF/m)

17.52 pF/ft.
(57.48 pF/m)

19.22 pF/ft.
(63.07 pF/m)

1000 megohm per 3280 ft. (1000 m) after 1 minute @ 500 Vdc Minimum
10.65 lb./1000 ft.
(15.85 kg/km)

10.65 lb./1000 ft.
(15.85 kg/km)

15.25 lb./1000 ft.
(22.7 kg/km)

12.67 lb./1000 ft.
(18.85 kg/km)

*Do not store in direct sunlight. **When not subjected to vibration.

SmartOne and Kidde are registered trademarks of Kidde-Fenwal, Inc. LHS is a trademark of Kidde-Fenwal, Inc.

This literature is provided for informational purposes only. KIDDE-FENWAL, INC. assumes
no responsibility for the product’s suitability for a particular application. The product must be
properly applied to work correctly.
If you need more information on this product, or if you have a particular problem or question,
contact KIDDE-FENWAL, INC., Ashland, MA 01721. Telephone: (508) 881-2000.
K-73-06 Rev AC

White

1 Amp maximum, 110 Vdc maximum

Conductor Resistance

Weight

-58ºF (-50ºC)

Proximity Detection

5 seconds (max)

Outer Jacket Material

Conductor Capacitance

-40ºF (-40ºC)

20 ft (6m) max

Flame Detection

External Diameter

-4ºF (-20ºC)

-22ºF (-30ºC)

© 2013 Kidde-Fenwal Inc.

400 Main Street
Ashland, MA 01721
Tel.: 508-881-2000
Fax: 508-881-8920
www.kiddefiresystems.com

14.65 lb./1000 ft.
(21.8 kg/km)



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2007:01:16 09:11:07Z
Creator                         : FrameMaker 10.0.2
Modify Date                     : 2013:03:18 11:13:36-04:00
Language                        : en
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/10/03-12:08:50
Producer                        : Acrobat Distiller 10.1.5 (Windows)
Creator Tool                    : FrameMaker 10.0.2
Metadata Date                   : 2013:03:18 11:13:36-04:00
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:878b9aaa-77a5-4c82-9034-3920b170743f
Instance ID                     : uuid:06f23e65-96df-41a8-9e83-cef086435407
Page Mode                       : UseNone
Page Count                      : 2

EXIF Metadata provided by EXIF.tools