Kidde Fire Systems Vega Lt Tm0081 Users Manual 1

2015-02-09

• INTRODUCTION
  • 1.1 DESCRIPTION
  • 1.2 ABOUT THIS MANUAL
  • 1.3 SYSTEM DESIGN
  • 1.4 ELECTRICAL SAFETY
    • • WARNING:
  • G
  • GLOSSARY OF TERMS AND ABBREVIATIONS
    • • • • Abbreviation
• 3. INSTALLATION
  • 3.1 SYSTEM SCHEMATIC - Figure 2
  • 3.2 APPROVED CABLES
  • 3.3 INTERNAL CABLE ROUTING
  • ENCLOSURE MOUNTING
  • EXTERNAL CONNECTIONS
    • 3.5.1 Mains Wiring
    • 3.5.2 Detection Loop Wiring
    • 3.5.3 Sounder Circuit Wiring
    • 3.5.4 Auxiliary Output Wiring
    • 3.5.6 Auxiliary Input Wiring
    • 3
    • 3.5.7 Battery Installation
    • 3.5.8 Network and Repeater Cable Wiring (Optional)
• 4
• 4. ACCESS CONTROL LEVELS
  • • • • Access Level 1
  • 4.1 ACCESS INHIBIT KEYSWITCH
• 5. CONTROLS AND INDICATION
  • 5.1 PANEL DISPLAY
  • 5.2 CONTROL BUTTON FUNCTIONS
  • 5
  • 5.3 STATUS WINDOW INDICATION
    • • • Colour
  • 5.4 LIQUID CRYSTAL DISPLAY LAYOUT
• 6
• 6. OPERATION
  • 6.1 STATUS NORMAL
  • 6.2 GAINING ACCESS TO LEVEL 2 OR 3
  • 6.2 FIRE CONDITION
  • 6.3 RESETTING THE SYSTEM AFTER A FIRE CONDITION
  • 6.4 FAULT CONDITIONS
    • 6.4.1 System Faults
    • Zone Fault Conditions
    • 6.4.3 Group Fault Conditions
• P
• PRIORITY ALARM STRUCTURE
  • • • • Alarm Handling
• 8. FIRE & PLANT ZONE INDICATIONS
• 9. MENU STRUCTURE
  • 9.1 MAIN MENU
  • 9.2 ISOLATE \ DE-ISOLATE MENU
    • • • ISOLATE – Menu Functions
  • 9.3 LIST MENU
    • • • LIST – Menu Functions
  • 9
  • 9.4 SET MENU
    • • • SET – Menu Functions
  • 9
  • 9.5 TEST MENU
• 10. COMMISSIONING
  • 10.1 SYSTEM CHECKS
  • 10.2 INITIAL POWER UP
  • 10.3 POWERING DOWN
  • 10.4 CONNECTING THE DETECTION LOOP
  • 10.5 ADDING OR REMOVING LOOP DEVICES
    • Power Down
    • Processor Restart
    • 10.5.3 Auto Learn
  • 10.6 CONNECTING SOUNDER CIRCUITS
• 11. PROGRAMMING STANDARD & CUSTOM FEATURES
  • 11.1 PANEL SET-UP
    • • • • • STANDARD FEATURES – PANEL SETUP
            • Option
  • 11.2 ZONE FIRE INFORMATION
    • • • • • STANDARD FEATURES – ZONE INFORMATION
            • Option
  • 11.3 LOOP DEVICE INFORMATION
    • • • • • STANDARD FEATURES – LOOP DEVICE INFORMATION
            • Option
  • 11.4 PANEL FUNCTIONS (STANDARD OR BLC OUTPUTS)
    • • • • • STANDARD FEATURES – PANEL FUNCTIONS
            • Option
  • 11.5 OUTPUT GROUP INFORMATION
    • • • • • STANDARD FEATURES – OUTPUT GROUP INFORMATION
            • Option
    • 11.5.1 Fire Output
    • 11.5.2 Isolate Output Group
  • 11.6 SET ACTIVATIONS
    • 11.6.1 Common Alarm Installations
    • 11.6.2 Zone by Zone Alarm Installations
    • 11.6.3 Activation Styles
      • • • Activation Style
    • 11.6.4 Zone and Output Group Timers
    • 11.6.5 Single Device to Output Group Programming
    • 11.6.6 Plant Alarm to Output Group Programming
  • 11.7 REPEATER INFORMATION
  • 11.8 MOTHERBOARD INFORMATION
  • 11.9 PRIORITY HEADER TEXT
    • • • • • CUSTOM FEATURES – PRIORITY AND HEADER TEXT
            • Priority
  • 11.10 CUSTOM DEVICE TEXT
  • 11.11 PLANT ALARM INFORMATION
    • • • • • STANDARD FEATURES – ZONE INFORMATION
            • Option
  • 11.12 NETWORK INFORMATION
• 12 PLUG IN OPTIONS – INSTALLATION AND COMMISSIONING
  • 12.1 VEGA LOOP CARD - Part Number 44782-K074
  • 12.2 REPEATER CARD - Part Number 44782-K076
  • PRINTER ASSEMBLY- Part Number VR0053
  • 12.4 VEGANET NETWORK CARD - Part Number VN2107
  • 12.5 CZN NETWORK CARD - Part Number VN2108
• 13 MAINTENANCE
  • 13.1 ROUTINE MAINTENANCE
  • 13.2 TEST MODE
• 1
• 14. PANEL AND LOOP DEVICE FAULT CODES
  • • • • • Fault Code
            • • Device removed from detection loop
• FAULT DIAGNOSIS
  • • • • Main Panel Messages
          • Message
        • Repeater Panel Messages
          • Message
• RECOMMENDED SPARES LIST
  • 17. TECHNICAL SPECIFICATION
    • • LT 2000