Kiddesigns 210A1 FRS 2-Way Radios (Walkie Talkie) User Manual CR 210 IB 1023

Kiddesigns Inc FRS 2-Way Radios (Walkie Talkie) CR 210 IB 1023

Users Manual

Talk ButtonMicrophonePower/Volume KnobGetting Started Turning Power On/OffSpeakingInstalling the Batteries CR-210 IB_back Printing color: Black Oct. 23, 13.Note: Batteries should always be installed by an adult.³ Use a Phillips screwdriver to open the battery compartment door located on the back of the unit.· Insert 4 AAA (R03) batteries into each Walkie Talkie with + and - terminals as indicated in the compartment.» Replace the compartment door and tighten the screw with a Phillips screwdriver. Do not over-tighten the screw. • Turn Power/Volume Knob right (clockwise) to turn on the Walkie Talkies. The Power LED will light to indicate unit is ON.• Both Walkie Talkies must be turned on in order to send and receive messages.• Turn Power/Volume Knob left (counter-clockwise) to shut off the Walkie Talkies.Press and hold the Talk Button while speaking into the Microphone. Release Talk Button to listen. Adjust volume using Power/Volume Knob.You Should KnowFor clear transmission, keep the antenna pointing upwards and the microphone approximately two inches from your mouth. For the Best Possible Performance• We recommend the use of alkaline batteries for longer life.• Do not mix old and new batteries.• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.• Batteries are to be inserted with correct polarity.• Remove exhausted batteries from the unit.• Do not attempt to recharge non-rechargeable batteries.• Remove the rechargeable batteries from the unit before charging.• The supply terminals are not to be short-circuited.• Batteries should be removed if the item will not be used for an extended period of time, such as a month or longer, to prevent battery leakage or damage.• Rechargeable batteries should only be charged under adult supervision.• Only batteries of the same or equivalent type as recommended are to be usedSpeakerPower LED³·ᕣWalkie Talkies can be used for all kinds of fun games and activities. Here are two suggestions:Hide and SeekJust like regular Hide and Seek, but with a twist: the “Hider” can send clues to the “Seeker” using the Walkie Talkies.Mystery SoundsCan you recognize the mystery sound? One kid sends a sound over the Walkie Talkies, while another tries to guess what the sound is. Examples can include an animal, song, TV show, or anything else! It is important to keep the Walkie Talkies as dry and clean as possible. You may clean the cabinet with a cloth or sponge moistened with mild soap and water. Do not attempt to use strong cleansers or solvents, as they may cause damage. ListeningPlaying Walkie Talkie GamesMaintenanceQuestions or Comments• Both Walkie Talkies must be turned on and have their antennas pointing upwards in order to send and receive messages (speak and listen).• Messages cannot be received while the Talk Button is being pressed. Release the Talk Button to listen.• Messages can be heard through the Speaker. • For questions or comments regarding this or other KIDdesigns products, please call our toll-free number: 1-888-TOP-TOYS Also visit our website: www.kiddesigns.comIf problems persist, please do not attempt to repair unit; see warranty for factory service.This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.CAN ICES-3 (B)/NMB-3(B)If one or both of the Walkie Talkies do not work, this may indicate that the batteries are weak. Insert 4 new AAA (R03) batteries into each unit. If the signal range of the Walkie Talkies decreases notably, this may again be an indication that the batteries are weak. Insert 4 new AAA (R03) batteries into each unit.Please keep in mind that this product does not transmit well through obstacles such as trees, buildings, and metal structures.If there is a sizable increase in static, it may be due to the proximity of electric motors, fluorescent lights, power lines, or other signal-disrupting objects. You may have to change your location.If problems persist, DO NOT ATTEMPT TO REPAIR THE UNIT. See the Warranty for factory services.FCC InformationTroubleshooting
Important Message to Customers Thank you for purchasing one of Disney/Pixar’s many top-quality electronic products. We would appreciate it if you take a few moments to read through these instructions. This will help you explain to the child the safe and proper way to use this toy, and to help give it the long-lasting life that Disney/Pixar products are designed for.Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the IC/FCC equipment authorization for this radio could violate IC/FCC rules.Portable Radio Operation and RF ExposureAntenna CareUse only the supplied or an approved replacement antenna.Unauthorized antennas, modifications, or attachments could damage the radio and may violate FCC/IC regulations.Printed in China CR210-102313-BCR-210 IB_front Printing color: Black Oct. 23, 13.Model CR-210Limited One-Year WarrantyPit StopWalkie TalkiesKIDdesigns, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI will repair or, at its discretion, replace this product without charge. This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by SDI Customer Service. The product must include proof of purchase, including date of purchase. An out-of-warranty fee for service will be charged for units that are received without proof of purchase.Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective batteries are the most common cause of problems encountered.If service is still required:1. Call SDI Customer Service at 1-888-TOP-TOYS (1-888-867-8697) for Return Authorization and for the address of the Factory Service Center. 2. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box. SDI is not responsible for damage that occurs during shipping to the Factory Service Center.3. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the warranty period. Also include your name and address information, a brief description for why the unit is being returned, and the return authorization number. No unit can be processed without a return authorization number.4. Write the return authorization number on the side of the shipping package and send the unit prepaid and insured to the Factory Service Center address authorized by SDI Customer Service.Disclaimer of WarrantyNOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner.This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI product.© 2013 SDI Technologies, Inc. All Rights ReservedQuestions? Visit www.eKids.comor call 1-888-TOP-TOYS© Disney/PixarVisit Disney/car.comDistributed by KIDdesigns, Inc. Rahway, NJ 07065-5024eKids is a wholly owned subsidiary of KidDesigns, Inc, 1299 Main Street Rahway NJ 07065
FRS FREQUENCY CHART (MHz) CH. No. CH. Freq. CH. No. CH. Freq. CH. No. CH. Freq. 1 462.5625 4 462.6375 7 462.7125 2 462.5875 5 462.6625 --- --- 3 462.6125 6 462.6875 --- --- FCC Warning To ensure that your expose to RF electromagnetic energy is Within the FCC allowable limits for occupational use, alwaysAdhere to the following guidelines: z DO NOT operate the radio without a proper antenna attached, as this may damaged the radio And may also cause you to exceed FCC RF exposure limits, A proper antenna is the antenna Supplied with this radio by the manufacturer or antenna specifically authorized by the manufacturer for use with this radio. z DO NOT transmits for more than 50% of total radio use time (“50% duty cycle). Transmitting more than 50% of the time can cause FCC RF exposure compliance requirements to be exceeded. The radio is transmitting when the “TX indicator” lights red. You can cause the radio to transmit by pressing the “PTT” switch. z ALWAYS kepp the antenna at least 2.5cm (1 inch) away from the body when transmitting and Only use the belt-clip which is listed in instructions when attaching the radio to your belt, etc., to ensure FCC RF exposure compliance requirements are not exceeded. The information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to as-sure that this radio operates with the FCC RF exposure limits of this radio.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE 1: This equipment has been tested and found to comply with the part 95 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

Navigation menu