Kiddesigns B19 bluetooth speaker User Manual English Manual

Kiddesigns Inc bluetooth speaker English Manual

Users Manual

XX-B19 - IB (English)Size: 90 x 150 (mm)Material: 90gsm WF paperColor: 1C + 1C (Black)Date: Apr 09, 2015XX-B19_040915-A Printed in ChinaListening to Music Via BluetoothFor iPhoneB19 B19B19 B19For otherComputerconnectedto working outlet Computer USB portORUSB Adaptor (not included)Charging The SpeakerListening to Music Via AUX-InTOP VIEWBACK VIEWUsing The SpeakerM12344Top View Key:1. Mode2. Volume Down/Track Reverse3. Volume Up/Track Forward4. Play/Pause/SpeakerphoneBack View Key:1. AUX Jack2. On/Off Switch3. Micro USB Charging Port4. Battery DoorMFRONT VIEWB19RechargeableBluetooth SpeakerQuestions? Visit www.ekids.com For any other questions: 1-888-TOP-TOYS Toll FreeDistributed by ekids 1299 Main Street Rahway NJ 070651. Connect the Micro USB cable to the micro USB charging port on the back of the speaker.2. Connect the standard USB plug end of the cable to a power USB port on a computer or other USB charging device. The blue LED on the speaker will flash while the unit is charging and will glow steadily once fully charged.Connect one end of a standard 3.5mm audio cable to the headphone jack of your device, and the other end to the AUX jack of the speaker. Press the Mode button on the top of the speakerThis device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.CAN ICES-3 (B)/NMB-3(B)FCC InformationAUX ON OFF DC5VAUX ON OFF DC5V1231. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and make it ‘discoverable’ by turning on Bluetooth mode (check in Options or Settings).2. Press the Mode button on the speaker. The blue LED will flash while the speaker attempts to pair with your Bluetooth device. “B19” should appear on your device’s Bluetooth screen. If “Not Connected” or a similar message appears on your screen, select “B19” to connect to the speaker.3. If pairing is successful, the blue LED on the speaker will glow steadily. Press Play on both the speaker and your device to start listening to music.Using The Speakerphone Via Bluetooth When you are listening to music via Bluetooth and your receive a call, you can answer the call through the speaker by pressing the Play/Pause/Speakerphone button. The music will be disabled during the call, and will resume once you end the call by pressing the Play/Pause/Speakerphone button again.LED Indicator

Navigation menu