KingBoard Technology KF-100 FM transmitter User Manual Model No

Shenzhen KingBoard Technology Co., Ltd. FM transmitter Model No

User manual

Model No. : KF-100 REV: A 20151216Kingboard technology Co.,ltdShenzhen KingBoard Technology Co., Ltd.Item: FM transmitterDescription:KF-100 it is the FM transmitter with a 3.5mm Jack, connected with cellphone or otherMP3 player.Remark:1. keep out of reach of children!2.Pls use the original accessories3.If unit have problem ,pls contact with the seller.Disassemble the unit by User is notallown4.Keep good ventilated environment when charge the unit, do not keep nearinflammables , oxidizers and explosive
Model No. : KF-100 REV: A 20151216Kingboard technology Co.,ltdB. Specification:1. Size：--- mm6. Charge port: Micro USB2. Weight：-- g7. connection jack：3.5MM3. Battery output：DC3.7 ~ 4.2V8. FM Frequency range ：87.5-108.0Mhz4. Charge input：DC 5V-1000mAh5. Battery capactity：110mAhOperation guideA:“Short press：Decrease 0.1 MhzLong press：Decrease the volumeB:“Short press：Increase 0.1 MhzLong press：Increase the volumeC. “ON/OFF”Switch to on, to turn on.Switch to on, to turn off.
Model No. : KF-100 REV: A 20151216Kingboard technology Co.,ltdUSER’S GUIDE:connect KF-100’s audio plug to the headphone jack of your music device,cellphone or other MP3 player.Turn KF-100 “ON”Start playing a song on your music device at medium level volume.Turn on your FM radio and find a station (frequency) that is not being used,for example: 88.1 MHz.Use the FWD and BACK scan buttons on KF-100 to match the radio stationyou found, for example: 88.1MHz.Note: Now both KF-100 and your radio should be on the same station, andyou should hear your music playing.Adjust the volume on your music device and/or FM radio as necessary.FCC Statement:This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or moreof the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.Caution: Any changes or modications to this device not explicitly approvedby manufacturer could void your authority to operate this equipment.This device complies with part 15 of the FCC Rules. Operation is subject tothe following two conditions: (1) This device may not cause harmfulinterference, and (2) this device must accept any interference received,including interference that may cause undesired operation.

Navigation menu