Kinpo Electronics BT002H Bluetooth Audio Headset User Manual BT002 UserMan
Kinpo Electronics Inc Bluetooth Audio Headset BT002 UserMan
Users Manual
BT002 Bluetooth Audio Dongle & Headset (English) E1 Contents I. Safety Instructions II. Specifications III. Name of Parts and Keys IV. LED Displays 1. Package Contents 2. Loading the battery 3. Pairing Pairing the Audio Dongle to the Headset Pairing the Mobile Phone to the Headset 4. Using the BT Set to Audio Device 5. Using the BT Set in PC 6. Using the Headset to Mobile Phone I. Safety Instructions Do not attempt to disassemble, repair or alter the equipment yourself. The high-voltage circuitry in the equipment poses significant electrical hazard. Do not attempt to disassemble, alter or directly solder the battery. Do not use batteries that are significantly damaged or deformed. Do not put it into water or allow it to get wet. Do not use this product in the bathroom. E2 II. Specifications General Power Source Headset: AAA Battery X 1 Audio Dongle: AAA Battery X1 AC Adapter: Dimensions Headset: Left 76.8 X 58.7 X 31.9 (in mm) Right 68.8 X 58.7 X 31.9 (in mm) (LXWXD) Audio Dongle: 64.5 X 39.1 X 21.2 (in mm) Weight Headset: Approx. 65.6g (without battery) Audio Dongle: Approx. 25.4g (without battery) Operating Temperature: 0qC to 40qC (32qF to 104qF) Conditions Humidity: 5% ~ 90% Storage -20qC ~ 60qC (-4qF to 140qF) Temperature Bluetooth Standard Bluetooth Profile Audio Dongle Headset Bluetooth SIG 1.2 A2DP (Advanced Audio Distribution Profile) HSP (Headset Profile) HFP (Hands-Free Profile) RF Specifications Spectrum Modulation Method Range Power Class Frequency Band Antenna Sensitivity Output Power Audio Dongle Headset FHSS (Frequency Hopping Spread Spectrum) GFSK (Gaussian Frequency Shift Keying) 10M (without obstacles / tested by laboratory) Bluetooth Class 2 2402 ~ 2480GHz 2402 ~ 2480GHz Internal embedded Antenna <0.1% BERAT –80dbm –80dbm -6dbm ~ 4dbm E3 III. Name of Parts and Keys Audio Dongle Audio Plug (see M) DC IN (see N)key LED key Battery Door ---------------------------------------------------------------------------------------------- M Power key ( To power the BT Dongle on and off 1. Press once Æ keep pressing 2 seconds to power on the BT Dongle 2. Press once Æ keep pressing 2 seconds to power off the BT Dongle N Pairing key ( When off, press and hold key, and then press key, to enable Pairing functions. ---------------------------------------------------------------------------------------------- E4 Bluetooth Headset Left Ear hook key(-) key(+) key LED Location of Battery / Battery cover Microphone M Power key ( To power the BT Headset on and off 1. Press once Æ keep pressing 2 seconds to power on the BT Headset 2. Press once Æ keep pressing 2 seconds to power off the BT Headset N Volume keys (+ / -) th There are 15 levels in volume control and the default value is 6 level. 1. Volume UP: press once to up one level. 2. Volume DN: press once to down one level. 3. Volume DN: when battery low, there will be a warning sound to remind you, if press Volume DN key, the warning sound will be turned off. O Compound Functions Use to pair, answer the phone, and cancel the phone call, see details as below: Status Keys Pairing Press and hold , then press Answer incoming call (press once: 1 second) Hang up the phone (press once: 1 second) Cancel See key Last number redial Press + at the same time E5 ---------------------------------------------------------------------------------------------Right Ear hook key (X) Status Key Play (press once: 1 second) Stop (press once: 1 second) Cancel (do not answer (press once: 1 second) the incoming call) IV. LED Displays Modes Pairing Searching Linked Dis-link Telephone call Talking Play music (Stop headset only) LED Status Blinking Blinking Blinking (in breathing style) Blinking Blinking Blinking (in breathing style) Blinking E6 1. Package Contents y Audio Dongle y Headset y AAA Battery X2 y Warranty Card y User Manual y AC Adapter (Optional) 2. Loading the Battery E7 3. Pairing Pairing the Audio Dongle to the Headset The Audio Dongle and Headset have been paired before leaving the factory. 1. Press and hold the key, and then press the key of the Audio Dongle 2. Press and hold the key, and then press the key of the Headset. During searching, both LED of the Audio Dongle and Headset will blink. When they are linked, both LED will blink in a breathing style. LED LED IMPORTANT The Headset will be turned off automatically when out of the signal receiving range (10M without obstacles) over 60 seconds. There will be a power off sound to remind you and then turn off the headset. NOTE This Headset beeps to alert you the battery life is low and it will keep on until you press the key to turn the beep off. Each time you turn on the Headset, the beep will alert you if the battery life is low. E8 Pairing the Mobile Phone to the Headset 1. Enable the pairing function of the Headset. See STEP 2 in “Pairing the Audio Dongle to the Headset”. 2. Power on your mobile phone and check the pairing function provided by the phone. STEP 1 ª Pairing the mobile phone and headset first, then turn off the headset. STEP 2 Pairing the audio dongle and headset, then turn them off. STEP 3 ª Pairing the mobile phone and headset again to confirm the pairing of the STEP 1. NOTE If you want to pair a second mobile phone to the headset, please repeat the STEPS 1, 2, and 3. E9 4. Using the BT Set to Audio Device The Audio Dongle is only used to transfer the signal from the audio device to Headset. The control side is in audio device. 1. Turn on the Audio Dongle and Headset 2. Turn on the audio device such as CD Player, Radio, etc. and play. 3. Plug the Audio Dongle to the earphone jack of the audio device. 4. Wear the Headset. Press key on the headset to play. During playing, press key again to stop. The stop function only work for the headset, you need to stop the audio device for stopping the playing. Audio Dongle connect to audio device 5. Using the BT Set in PC The Audio Dongle is only used to transfer the signal from the PC to Headset. The control side is in PC. 1. Turn on the Audio Dongle and Headset 2. Turn on the PC. 3. Plug the Audio Dongle to the earphone jack of the PC. 4. Wear the Headset. Audio Dongle connect to PC E10 6. Using the Headset to Mobile Phone 1. Pair your Mobile Phone to Headset first. 2. Wear the Headset. Status Answer Hang up Cancel Last number redial Key (press once: 1 second) Remarks When listen music, if there is a phone call coming in, the music in the headset side will be stopped, and there is a ring tone. Press the key and the music (press once: 1 second) will play again. If do not want to answer the phone call. + Redial the last call you have made. E11 CE Statement For the following equipment: Bluetooth Audio Dongle & Headset Is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (89/336/EEC), Low-voltage Directive (73/23/EEC) and the Amendment Directive (93/68/EEC), the procedures given in European Council Directive 99/5/EC and 89/3360EEC. ---------------------------------------------------------------------------------------------- FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1. The device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC RF Radiation Exposure Statement This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user¡¦s authority to operate the equipment. E12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2005:12:15 12:05:00Z Modify Date : 2005:12:15 20:06:05+08:00 Page Count : 12 Creation Date : 2005:12:15 12:05:00Z Mod Date : 2005:12:15 20:06:05+08:00 Producer : Acrobat Distiller 5.0 (Windows) Author : amanda.wu Metadata Date : 2005:12:15 20:06:05+08:00 Creator : amanda.wu Title : BT002 UserMan.pdfEXIF Metadata provided by EXIF.tools