Kinyo ARTDIOBT328 2.1 Portable Stereo Bluetooth Speaker User Manual
Kinyo Co., Ltd 2.1 Portable Stereo Bluetooth Speaker
Kinyo >
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 916975 |
| Application ID | RVPyWEULlC1lLbnSfTLNAg== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 177.93kB (2224126 bits) |
| Date Submitted | 2008-03-19 00:00:00 |
| Date Available | 2008-03-20 00:00:00 |
| Creation Date | 2008-03-13 16:13:25 |
| Producing Software | Adobe Acrobat 7.0 Image Conversion Plug-in |
| Document Lastmod | 2008-03-13 16:13:25 |
| Document Title | User manual |
| Document Creator | Adobe Acrobat 7.0 |
ARTDiom
BT-BEB
2.1 BLUETOOTH® STEREO SPEAKER with
Built-in Microphone
User's Guide
Guide De L’utilisateur
Guia De Uso
@ KINYO IARTDio
www.kinyo.oom
Please read and understand all safety instruction before use.
The Bluehooth® word mark and logos are owned by the Bluetooth SIG, Inc. and
any use of such marks by Klnyo Company Is under license.
1 2558100
LIMITED WARRANTY
Kinyo Company Inc. (KINYO) warrants this product to the original purchaser against defects
in material and workmanship for a period of one (1) year from the date of purchase. Kinyo will,
at its option, repair or replace the defective product at no cost to you during the warranty
period.
The warranty will not apply if the unit has been subject to accident, misuse, abuse,
disassembly. altered or operated contrary to the instnlctions contained in the accompanying
manual.
To obtain warranty service, proof of purchase. in the form of retail receipt. bill of sale or invoice
must be presented as evidence that the unit is within the warranty period. The product must
be packaged either in its original package or in such a way as to reasonably protect it from
shipping damage. Properly fill out the warranty card with description of problem. Send the
product freight prepaid or deliver to:
A1TN: SERVICE DEPT. KINYO COMPANY INC.
14235 LOMITAS AVE. LA PUENTE, CA 91746
ONE YEAR LIMITED WARRANTY CERTIFICATE
NAM E
ADDRESS
CITY STATE ZIP
PHONE EMAIL
DATE OF PURCHASE WHERE PURCHASED
PROBLEM
SIGNATURE
mmsmymmmummmam
®KINYO IARTDio
14235 LOMITAS AVE. LA PUENTE. CA 91746 WWW.KINYO.COM
IMPORTANT SAFETY INSTRUCTIONS
Please read and understand all safety instructions before use.
0 Read these instructions.
- Keep these instructions.
0 Heed all warnings.
0 Do not use this apparatus near water.
0 Clean only with dry cloth.
0 Do not block any ventilation openings. Install in accordance with the manufacturer's instmcticns.
0 Do not push objects into apparatus vents or slots because fire or electric shock hazards
could result.
0 Maintain a minimum distance of at least 6 inches around apparatus for sufficient ventilation
- Ventilation should not be impeded by covering the ventilation openings with items such as
newspapers, table cloth. curtains. etc.
0 No naked (open) flame sources. such as lighted candles. should be placed on or near apparatus.
0 Place apparatus In a stable location so it will not fall causing product damage or bodily harm.
- Do not install near any heat sources such as radiators, heat registers. stoves, or other
apparatus Gncluding amplifiers) that produce heat.
0 Do not defeat the safety purpose of the polarized plug. A polarized plug has tow blades
with one wider than the other. The wide blade is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
0 Operate the apparatus only from the low level audio line output jack of the computer or of
an audio device.
0 Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles. and the point where they exit from the apparatus.
0 Only use attachments! accessories specified by the manufacturer.
0 Unplug this apparatus during lightning storms or when unused for long periods of time.
0 Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way. such as power-supply cord or plug is damaged liquid has
been spilled or objects have fallen into the apparatus. the apparatus has been exposed to
rain or moisture. does not operate normally. or has been dropped.
0 The apparatus shall be disconnected from the mains by placing the power/standby switch
in the standby position and unplugging the power cord of the apparatus from the AC
mains receptacle.
0 The socket-outlet shall be installed near the equipment and shall be easily accessible.
WARNING TI) IEIIIIGIIIE IIISI OF FIIIE fill ELEI'IIICSIIIICK. II“ IIIT mimlslmllflim
A u?“ “I'm' & IIIII DII HIIISIIIIF.
mirror-ac ltllmllll FILM UH? SOLIIEREII III PIMLI‘O [EDIIBE III! RISK OF arm": Sllllll. HEB! “In
IIIIUFIED SERVICE PENDIIIIEL
summpao'recmuaeoomennm
Mttwmdoliisworfiulblh‘epclhddmdmlh cfwilheimhd
mmmmmafimm iiiiorlltedbudof
memmmeau m.
_ Thlehtxlimedbyl’neymbolhndm MHWGMW.
The eullmltlorl point within in equilateral triangle It The lighting flash with arrowhead symbol with In equilateral triangle
intended he elertthe user to the presence of Important is intended be alert the usertc the presence of unlnsuleted
operating and maintenance iservldng) Instructions In dangerous voltage within the product's enclosure that may be of
the literature accompanying the appliance. auffldent magnitude on constitute a rlsk of electric shock to persons.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 oftlie FCC Rules. These limlts are deslgned to provide reasonable protection against
harrnfill interference in a residential installation. This equipment generates, us es and can radiate radio frequency
energy and, ifnot installed and used in accordance with the instructions, may cause harrnfill interference to
radio communications However, there is no guarantee that interference will not occur in a particular installation
Iffl—ljs equipment does ciiuse harrnful interference to radio or televlsion reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more ofthe
following measures:
-- Reorient or relocate the receiving antenna,
-- Increase the separation between the equipment and receiver.
cNJ'I'IONfI'O RENCE THE MOP m0 wwK.
D0 WT REMOVE DOVER CIR M
No USER—mm PARTS INSIDE
REFER SENDING TD QIMIJFEB GEM/ICE mNEL
7, Connect the cqmprn cnt 1nto an outlet on a circuit different from that to Wthh the receiver ls connected.
—- Consult the dealer or an experienced radio/T‘V technician for help.
RF Exposure Information:
To comply with FCC RF exposure compliance requirement, this grant is applicable to only mobile
configurations. The antenna used for this transmitter must be 1nstslled to provide ii separation dlstance of at
lease 20crn from all persons and must not be coelociited or operating in conjunction with any other antenna or
transmitter.
Changes or modifications not expressly approved by the party responslble for compliance
could void the user's authority to operate the equipment.
NTRODUC’HON
Artdle'e BT—nl, Is a 2.1 Bluetaolh stereo Speaker, compliant with Bluetaoth version 1.2
class 2. The BT-aze supports Blustcoth AZDP', AVRCP’, Headset and Hands-tree profiles.
The system is capable ofstreaming music from mobile phones, MP3 players. portable
media players. PDA's, computers and other audio devices with BIuetooihAzDP enabled.
This system operates ereIeealy from audio sources up to 33 taet(10 mat-re) away open
space. The built-In microphone. enables to easlly answer phone calls hands-tree through
the system. The system also comes with an auxiliary inputthatwill connect all line in
audio sources (cablea included).
1 The pic back and its pin -in Biuetooth adapter/irenamitterldevice needs to aupportAzDP
(Audio istribu on Profi e).
2 The playback and Its plug-In Buiatooth adeptarltransmltterldevlce needs supportAVRCP
(Audiolvidee Remote Control Profile).
0 86) $96)
0 VOL- : Press to decrease the volume.
9 VOL+: Press to increase the volume.
8 K1: Press to play the previous selection.
0 HI : Press to play the selection, press again to pause the selection.
6 Dbl: Press to play the next selection.
(7) PAIRING Button:
e) PAlllltmflniiiate the pairing mode irom the speaker to the Bluetooth enabled device by
pressing and holding the Pairing button for three seconds. The blue LED will flash three
times. Release the button and the blue and red LEDs will tiash alternately to Indicate that
the speaker is in the pairing mode. Please see detailed pairing instructions on PAGE 5.
Note: It the pairing process cannot be completed within 90 seconds, the blue and red
Blumoth LED will stop flashing and the Bin-tooth pairing process will automatically
terminate. Please repeat the pairing Instructions to pair up the Bluetooth speakerwlth
the Biuetooth device.
h) DISCONNEGTING BLUETOOTN CONNECTION: To disconnect the Biuetoothwireless
connection. press and hold the button again iorthree seconds. The blue LED will ilash
three timesto indicate the Biuetooth signal is disconnected.
c) ANSWERINGIENBING CALLS: Ta answerthe phone on your Bluetnoth device (when
connected to the Biuatcotlr speaker) press the button to pick up the call. Press again
to end the call.
PAIRING LEI! Indicator:
The blue and red LED will flash altematelyto indicaw that the Bluatoolh speaker enwrs
the pairing mode. The blue LED will flash constantly when the Bluetooth device is
successfully connected with the Blueiocth speaker through Eiluatooth wireless technology.
If the Eiuetooth connection is disconnected. the blue LED will flash three times to indicate
the Bluetootlr signal is disconnected.
Power ButtenzFress to turn speaker on. press again to turn speaker oft.
Power LED Indicator: Green LED will light up when powerla on.
AC Plug: Plug the“: power plug into a wall outlet.
AUXIN: Inaertthe 3.5mm stereo inputcahle (included)to the 'AUX IN"ieck. Connect the
other end to the audio output oi an audio source.
* :The Built-in Microphone is located on the bottom ofthe system.
Note: Make sure your Bluetooth device I: connected with the Bluetooth speaker. when the
phone rings on your Bluetocth device press the Pairing button to answer the call. You will be
able to talk hands-tree through the microphone. Press the Pairing button again to end the call.
POWER SOURCE
ac Power (Wall Outlet)
1.Plug theAC plug Into a wall outlet.
2.Press the POWER button to turn on the system.
PAIRING WITH BLUETOOTH ENABLED DEVICES
You need to pair the system with your Bluefooth device before using. Make sure the system
is on before pairing.
am
pm mi. new
mmdie-tol i
tun-n m
When initiating the pairing,
keep the distance between the
system and the Blualonth
wireless technology enabled
device less than 3 set (1 meter).
Make sure there is no other
Bluetooth wireless technogy
enabled device nearby.
er—Hl
Pairing la the process ofaeaocletlng your speaker with Bluetuofh devices. Pairing
establishes a permanent securit link between all devices uain Bluerocth wireless
technology. You will be prompts to enter a PIN (personal Ident Iication number) to
establish th I pairing. After the pairing is successful. you will not have to re-enter it
again. The de remembers the PIN and wiil automatically connect to the speaker.
The following elring instructions describe the pairing process between the speekerand
a ty Ical Blue 1h audio source. The pairing process may be differentforyour Bluataoth
day use. Ifgou have problems pairing. please refer to the user's guide olyourspeolflc
device for
PAIRING WITH ANY BLUETOOTHAZDP ENABLED DEVICES
1.Tum your speaker on. Press and hold PAIRING button forlhrcc seconds. until the
PAIRING LED flashes blue IIghtthree times.
2. Release the button. The PAIRING LED will flash blue and red light alternately, lndlcatlng
that the Bluefooth speaker and the Bluefaoth device are in the pairing mode.
3. Turn on the Biuefaoth settings on your Bluetooth device. Then perform a search for
Bluetooth devices in range.
4. YuurEluetootti device will display a newdevioe named 'ARTD|0'0I| the Bluetooth Device List.
5. Select "ARTDID' from the Bluetooth Device List.
5. You are prompted to enters FIN.Entcrthc default PIN of '0000.'
1. when the Bluerootlt LED flashes blue light constantly. it indicates that the pairing
process has been completed successfully. Your computer and the Bluefaoth speakerare
now connected through Bluetooth wireless technology.
8. The LCD screen on yourBluetooth device should display a BIuatoothOb or audio icon
(CH / {1mm indicate Bluetooth connection.
NOTE: If the pairing process cannot be completed within 90 seconds. the blue and led
Bluarooth LED stops flashing and the Bluelootlt pairing process will automaticallytermlnated.
Please repeat the pairing Instructions to pair up the speakerwllh the Blualooth device.
eteiled pairing instructions.
9. Select music on yoursluetooth device to play wirelelalythrough your a'r-azs speaker system.
Refer to the user's guide clyour Bluetooth device for more detailed instructions.
PAIRING WITH BLUETOOTH-ENABLED COMPUTER
1 . Start the Eluetoorh application on your computer. then perform a search for Bluetooth
devices In range.
2. Turn yourspaakercn. Press and hold PAIRING button forthree seconds until the PAIRING
LED flashes blue light three times.
3. Release the button. The PAIRING LED will flash blue and red light alternately lndlcatlng
the Bluelooth speaker and Bluetooth device are In the pairing mode.
4. Yourcomputershould now display a new device named “ARTDIO'on the Bluetooth Device List.
5.5elect “ARTDID' from the Bluelooth Device List.
5. You are prompted to entara PIN. Enter the default PIN of'0000.'
7. When the PAIRING LED flashes blue light constantly. It Indicates thatthe pairing process
has been completed successfully. Vourcomputar and the Eluetooth speaker are now
connected through RIM-tooth wireless tachnoiogy.
NOTE: It the pairing process cannot be completed within 90 seconds. the blue and red
Bluetooth LED stops flashing and the Blualooth pairing process will automaticaily terminated.
Please repeat the pairing instructions to pair up the speaker with the Bluetoolh device.
8. Select music on your computer to play wirelessly through your BT—SZB speaker system.
Refer to the user's guide ofyour Bluetooth application for more detailed instructions.
PAIRING WITH A COMPUTER WITH A BLUEI'OO'I'H USB ADAPTER
1. For all computers that are not Bluetooth-enabled. plug In the Bluetoorh USB Adapter Into a
USE port on your computer. Install the software ifrequired (reterto the user's guide for
detailed instructions for software installation)
2. start the Bluatooth applltatlon on your computar.Pertorm a search forBIuetooth devices In range.
3. Turn on yourspeaker, then press and hold the PAIRING button for three seconds, until
the PAIRING LED flashes blue light three tlmel.
4. Release the button.The PAIRING LED will flash blue and red IIghtaItarnater, Indicating
that the Eluatoath speaker and the Bluatootlt device are In pairing mode.
5. Your computer should new display a new device named ‘ARTDIO" on the Blueiooth
Device List.
6. Select "ARTDIO" from the Bluetoorh Device List.
1 You are prompted to enter a PIN. Enter the default PIN ctr-noon!
B: When the PAIRING LED flasher blue light constantly. It Indicateethat the pairing process
hes been completed successfully. Your computer and the Bluelocth speaker are now
connected through Bluetocth wireless technology.
NOTE: Ilthe pairing process cannot be completed within 90 seconds. the blue and red
Bluetooth LED stops flashing and the Blueioofh pairing process will automatically
laminated. Please repeat the pairing Instructions to pair up the the speakerwlth the
Bluetooth device.
9. Select music on your computer to play wirelessly through your BT—SZB speaker system.
Rafarto the user‘s guide of your Bluatoofh USE adapter for more detailed instructions.
USING YOUR BLUETOOTH SPEAKER
Uslng Your Bluelooth Spaakerfer Wireless Music
1 . Select music from your Bluetooth device and playwlrelasely through the speaker.
2. Press VOL + or VOL- to adlust the volume.
3. Press i« or »t to play previous or next selection.
Using Your Blueiooth Speaker for Hands-free Cell
1." the phone ring: 1mm your Bluetoath device, press the PAIRING button to anew-rthe
phone. Enjoy youroonversatlon hands-free through built-In microphone.
2. End the cell by pressing the PAIRING button again.
3. Music will resume after the call.
CONNECTING T0 OTHERAUDIO SOURCES
Connect other audio sources such a: IPnd, MP3 players, portable CD players. portable
game consoles and computer to the speaker through an auxiliary Input.
1. Disconnect the Blueloalh wireless connection to any Elustoolh enabled device. Press
and hold the PAIRING button forsxeoonde. The Pairing LED will flesh blue Iightihree
times to indicetethe Bluetcath ' less is disconnected.
2. Insert one end ofthe 3.5mm stereo Input csbl- (Included) Into the “AUX IN'Jsck on the heck
ofthe system. Then Insert the other end Into the line outputJeok olyoureudlo source.
3. Turn on the audio souwe and play music.
4. Press VOL+ orVOLr- Ia ediusltlle volume.
SPECIFICATIONS
'18 Watts Total Power Output Specifications for Bluetoutha:
'Pre-Amplified a Magnetically Shielded . Bluetonthfit v1 2 Compliant
SthIIIIs: ' SIUEIUUM Radio Class 2
s3 Watts per Channel ' 2.4GH1-2.4835GH1 ISM Bandwidth
-2 x 2' Full Range Drivers ' Supports BluatoothQAZDP, AVRCP, Headset
-Frsquency Reepcneez1GDHz ~ anHz and Hands-ties Profiles
Subwoofsr: ' Up to 33 Feet Operating Range (open space)
.12 Watts with 3- Woofer Driver ' imlritrsillppons Pairing. Encryption-
'F R :80H ~300H 5" "33 '°“
qfiflf‘lfir'gfifiegfizgfieceiv; z - No software Inutellsflon In Needed
-Built-in Microphone
-Slgnel Input: Bluetootho Wireless.
3.5mm Smreo Input
lFunctIons: Power Onlotl, Volume Controls,
TelklPeIrIng,PIey/Peuse. Previous, Next
-Power Source: AC 12V 2A
nDimeneione: W9.45' H3.94" x D63!“
BOX CONTENTS
1x 3.5mm Stereo InputCebIe
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2008:03:13 16:13:25+08:00 Creator : Adobe Acrobat 7.0 Modify Date : 2008:03:13 16:13:25+08:00 Page Count : 5 XMP Toolkit : 3.1-701 Metadata Date : 2008:03:13 16:13:25+08:00 Creator Tool : Adobe Acrobat 7.0 Format : application/pdf Document ID : uuid:4efeb57e-1574-44e0-a545-d9a5afa3fe23 Instance ID : uuid:b251215f-7e08-4dda-95b0-9cca8e140165 Producer : Adobe Acrobat 7.0 Image Conversion Plug-inEXIF Metadata provided by EXIF.tools