Kobian Canada MINIKB2 2.4GHz Mini Keyboard User Manual

Kobian Canada Inc., 2.4GHz Mini Keyboard

User manual

Hipstreet Mini Wireless Keyboard and Touchpad Thank you for purchasing this Hipstreet product. Description
Included · Mini Wireless Keyboard with Touchpad · 2.4GHz Wireless Receiver (Dongle) · User Manual · Mini-USB Charging Cable Specifications Receiver (dongle): Nano style Connection port: USB2.0 or higher Transmission mode: GFSK 2.4GHz wireless, up to 10 meters Transmission Power: Less than +4db Power supply: Rechargeable polymer Lithium-ion battery Charging voltage: 4.4V ~ 5.25V Charging current: 300mA Sleeping current class1: 30uA Operation voltage: 3.7V Operating current: <50mA Product weight: 95g Product size: 146.8*97.5*19mm Installation 1. Charge the keyboard with the included charging mini-USB cable for at least 3 hours. Any 5V USB source may be used. (USB port on a Laptop/PC, USB Adapter, etc.) 2. Open the back cover on the backside of the keyboard and remove the 2.4GHz wireless receiver (Dongle). 3. Insert the 2.4GHz wireless receiver (Dongle) into an available USB port. 4. Slide the ON/OFF Switch to the “ON” position on the
keyboard to power it on. The keyboard will install automatically. No further actions are required – you are now ready to use your keyboard! Note：The included Mini-USB cable can only be used for charging the Keyboard. Touchpad This touchpad supports multi-finger functions. (1) Left click is achieved by a single finger tap on the touchpad. (2) Right click is achieved by a simultaneous two finger tap on the touchpad. (3) To Scroll down on a page, drag two fingers downwards/upwards simultaneously on the touchpad. Auto Sleep and Wake-up Features The keyboard supports auto sleep and wake-up to save battery when not in use. When the keyboard is idle for 3 minutes, it will go into auto sleep mode. In the sleep mode, all LED indicators will turn off. Pressing any key can wake the keyboard back up. Switching Off the keyboard after use Slide the ON/OFF Switch to the “OFF” position to turn it off. The USB receiver (Dongle) does not need to be placed back into the keyboard, this makes usage much easier going forward.
Enabling the Backlight Feature To enable the backlight LEDs, press the button. The backlight LEDs will turn ON. The backlight LEDs will turn off automatically when the keyboard goes into auto sleep mode. If a any key is pressed to wake the keyboard back up, the backlight LEDs will also turn back ON. Charging the Internal Battery The device uses a built-in lithium-ion battery. Please use only the included mini-USB charging cable. Note: Fully charge the Keyboard before initial operation. This device can be used when charging, but charging time will be extended. When the battery is low, the low-voltage light will blink. Warning · Never try to open or repair this product yourself. · Keep this device away from all fluids, such as water. Maintenance · Do not attempt to disassemble the device or replace the
rechargeable battery. Doing so will void the warranty. · The battery will discharge when it is stored for a long time without operation. · Do not expose the device to extreme heat or cold environments; this will shorten the battery life. PRODUCT AND BATTERY DISPOSAL This product contains a built-in lithium battery and should not be disposed of in normal household waste. The battery in this device is not intended to be removed by the individual or end user. For disposal and recycling, please contact your local waste management authorities. The recycling and processing of electronic waste will make a significant contribution towards helping protect the environment. The cell within this product uses Lithium Ion technology. FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class C digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This device complies with Canadian ICES-003 and RSS-210 CONTACT US North America 1- 888-456-2426 UK 0800-051-8330 Netherlands 0800-404-0006 Germany 0800-180-7686 Monday through Friday: 8:30am – 5:00pm Email: support@hipstreet.com If you encounter any difficulties with this product, please visit our website at www.hipstreet.com

Navigation menu