Kodak 4020 Users Manual Service For The Ektapro Projector

2015-02-04

• Library
• Manual Contents
• Kodak EKTAPRO Slide Projector Service Manual
  • TABLE OF CONTENTS
  • 1. GENERAL INFORMATION 1-3
    • Service Tools 1-3
    • Safety Precaution 1-4
    • Safety Check 1-5
  • 2. INTRODUCTION 2-1
    • Projector Models 2-2
      • EKTAPRO Model 4020 2-2
      • EKTAPRO Model 5020 2-4
      • EKTAPRO Model 7020 2-5
      • EKTAPRO Model 9020 2-6
      • Overview 2-7
    • Accessories 2-8
      • DUAL LAMP MODULE 2-8
      • CABLE REMOTE 2-8
      • HEAT ABSORBING GLASS with CLIP
      • CONDENSER KIT 4X4 (with CLIP) 2-9
      • IR REMOTE System RA/LP (Laser Pointer) 2-10
      • 12/7-PIN MODULE 2-10
      • LENS SUPPORT 2-10
      • 12/7-PIN ADAPTER CABLE 2-11
      • TWIN SOCKET ADAPTER 2-11
      • SLIDE SYNCHRONIZER 2-12
      • LAMPS 2-12
    • Specification 2-13
    • CONNECTORS 2-13
      • Remote SOCKET on Projector: 2-13
      • P-Bus / RS 232 fiINfl 2-14
      • P-Bus / RS 232 fiOUTfl 2-14
      • ACCESSORY SLOT 2-15
    • OEM ACCESSORIES 2-16
      • COPYWRITE 2-16
      • SLIDE SYNCHRONIZER ADAPTER by KODAK AUSTRALIA 2-17
      • ADAPTER by MÜWO 2-18
      • ADAPTERS by MAYER & ZELLER 2-19
      • ADDRESSES 2-20
        • CONTROL SYSTEMS 2-20
        • SOFTWARE for direct PC CONTROL 2-21
        • RACKS 2-21
        • EXTERNAL TIMER 2-21
  • 3. THEORY GUIDE 3-1
    • Block Diagram 3-1
    • Microcontroller Unit 3-3
    • Description of Functions 3-4
      • Power Supply 3-4
      • Switch On / Initialize Procedure 3-6
      • Slide Change Sequence 3-7
      • Tray Motion 3-8
        • Tray Motion Sequence: 3-9
      • LAMP Control 3-11
      • Focus 3-15
      • Auto focus 3-16
      • P-BUS 3-17
        • Command Structure 3-18
      • Accessory slot 3-19
      • Remote Control 3-20
  • 4. DISASSEMBLY/ASSEMBLY 4-1
    • UPPER HOUSING 4-1
    • BUTTONS and COVER PLATES 4-2
      • Assembly 4-3
    • CENTER HOUSING 4-4
    • FAN, KEYBOARD PCB and TRAY MOTION PCB 4-8
    • BACK PANEL PCB 4-10
    • TRANSFORMER, POWER SUPPLY PCB and BACK PLATE ASSEMBLY 4-11
    • MECHANISM FRAME and LENS MOUNT 4-12
    • LENS MOUNT 4-13
    • RETAINER AF ASSEMBLY 4-16
    • MECHANISM FRAME 4-18
    • AUTO FOCUS PCB and FOCUS MOTOR 4-21
    • Master Board PCB 4-22
      • Master Board PCB Connectors 4-23
      • MICROCONTROLLER 4-24
    • LOWER HOUSING 4-25
    • DUAL LAMP MODULE 4-26
      • DUAL LAMP MODULE 4-29
    • Lubrication 4-30
  • 5. DIAGNOSTICS 5-1
    • Diagnostic Overview EKTAPRO 4020/5020/7020/9020 and 9020/CINE 5-1
    • Preparation 5-3
    • No Function 5-4
    • Switch on Procedure Problems 5-9
    • Lamp Problems EP 4020/5020/7020/9020 and 9020/CINE 5-12
    • Mirror Position 5-17
    • Switch On Procedure 5-18
    • Switch On Procedure complete - No Keyboard Function 5-19
    • No function with REMOTE CONTROL 5-20
    • Cable Remote 5-23
    • No Slide Transport forward/reverse and other projection problems 5-24
    • Shutter Problems 5-35
    • Fan Problems 5-27
    • Slide Obstruction in Slide Tray 5-29
    • Wrong Transport Step by 80/140 SLIDE TRAY 5-30
    • No Focus Actuation 5-32
    • No Standby Function 5-33
    • Communication Trouble 4010/5010/9010 5-35
    • AUTO FOCUS 5020/9020 and 9020/CINE: No AUTO FOCUS Function 5-39
    • Accessory Slot 7020/9020 5-40
  • 6. Projector Checking 6-1
  • 7. MAINTENANCE 7-1
    • Maintenance Intervals 7-1
    • Maintenance Procedure 7-1
    • Cleaning 7-1
    • Lubrication 7-3