Kodak Ektagraphic Iii Users Manual Ektg_iii
III to the manual a6427095-7b9e-48be-b4cd-f42f972c2eea
2015-02-04
: Kodak Kodak-Ektagraphic-Iii-Users-Manual-370850 kodak-ektagraphic-iii-users-manual-370850 kodak pdf
Open the PDF directly: View PDF 
.
Page Count: 38
| Download | |
| Open PDF In Browser | View PDF |
Operating Manual KODAK EKTAGRAPHIC III Slide Projectors PRESENTATION TECHNOLOGIES Important Safety Instructions When using your projector, always follow basic safety precautions: 1. Read and understand all instructions before using this equipment. 2. Operate this projector with 110- to 125-volt 60 Hz current only. Incorrect voltage can cause projector malfunction. See “Startup” on page 3 for Models III BR and III ABR, which feature a multi-voltage selector.) 3. Close supervision is necessary when any appliance is used by or near children, or others who may not understand the need for these precautions. Do not leave the projector unattended during use. 4. Be careful not to touch hot parts. For lamp replacement, allow the module to cool before touching the lamp and the surrounding area. Do not place the lamp module on heat-sensitive surfaces. 5. Do not operate your projector if the cord is damaged or if the projector has been dropped or damaged (see “How to Obtain Service” on page 30). 6. Position the cord so that it is not tripped over, pulled, or placed in contact with hot surfaces. 7. If an extension cord is necessary, use a cord with a current rating at least equal to that of the projector. Cords rated for less amperage than the projector may overheat. 8. Always unplug the projector from the electrical outlet before cleaning and servicing and when it is not in use. 9. Allow the projector to cool before storing. 10. Do not immerse this equipment in water or other liquids. 11. Do not disassemble this projector. Use a qualified service technician when service or repair is required. Incorrect reassembly can cause electric shock the next time the projector is used. 12. Use only safety electrical low-voltage (SELV) devices. 13. The use of an accessory attachment not recommended by the manufacturer may increase risk of damage. 14. Keep the air-flow vents unobstructed. Save These Instructions Operating Manual KODAK EKTAGRAPHIC III Slide Projectors Congratulations! You have just purchased a KODAK EKTAGRAPHIC III Slide Projector with a KODAK Extra Bright Lamp Module. This new lamp module procides 30% greater light intensity so your images look brighter, richer and more saturated. This module features a “Lamp On” indicator on the lamp module door. Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Loading the Slide Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Projecting Your Slides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Editing Your Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Clearing a Gate Jam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Using the Built-In Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Using a Dissolve Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Changing the Projection Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Cleaning the Condenser, Heat-Absorbing Glass, and Mirror . . . . . . . 23 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 How to Obtain Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Appendix A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Serial Number The serial number of your projector is printed on the label affixed to the power cord retainer on the base of the projector. Record this number, as well as the model identification, date, and place of purchase, for future reference. KODAK EKTAGRAPHIC III Slide Projector 1 Overview FRONT RIGHT 1 – Tray 2 – Lock Ring 3 – Storage Compartment/Remote 4 – Elevating Foot 5 – Elevating Adjustment Wheel 6 – Elevating Foot Release Button 7 – Lens 8 – Viewer (Model ATS) 9 – Focus Knob 10 – Autofocus (Models A, AMT, & ATS) 11 – Select Bar 12 – Timer (Models AMT & ATS) 13 – Reverse 14 – Forward 15 – Power/Fan/Half Lamp/Full Lamp BACK RIGHT 16 – Tray Release Latch 17 – Lamp Module 18 – Raised Index Mark 19 – Reading Light Cover 20 – Standby Light (Model E Plus) 21 – Special-Application Receptacle 22 – Remote Receptacle BASE 23 – Power Cord 24 – Power Cord Retainer 25 – Leveling Foot 2 KODAK EKTAGRAPHIC III Slide Projector Introduction Take the time to read the instructions in this operating manual to become familiar with your KODAK EKTAGRAPHIC III Slide Projector and how to operate it properly. Operation Startup Important Models III BR and ABR Only Before you turn on your new KODAK EKTAGRAPHIC III BR or ABR Slide Projector, it is critical to set the voltage selector to the proper setting. Use the proper fuse for the voltage selection. See the fuse label on the back of the projector. The voltage selector on the KODAK EKTAGRAPHIC III BR or ABR Slide Projector is located on the base of the projector. Using a small object, such as a coin, you can set the voltage selector for the proper voltage (100, 115, 130, 220, 230, and 240 V). KODAK EKTAGRAPHIC III Slide Projector 3 Operation EKTAGRAPHIC III BR and ABR Slide Projectors have a sensing capability to automatically set the proper power cycle (50 or 60 Hz). This eliminates the need to manually change the two-position switch included on models manufactured before November 1996. These projectors are shipped with a detachable power cord that is packaged separately (not wound on the Power Cord Retainer). A spare fuse is provided. The fuse is located in the small, pull-out storage door below the Power Inlet. Simply pull the door with your finger. Remove the spent fuse with a small object (e.g., pencil tip) by pushing the fuse up and removing it from the receptacle. Press the spare fuse into the receptacle and close the storage door. Important The EKTAGRAPHIC III BR and ABR Slide Projectors are supplied with a 3-wire grounding power cord to comply with UL122 (USA) and CSA222 (Canada) safety and electrical standards. We urge you to provide a permanent, properly installed 3-wire receptacle as the source of power for this projector. For advice and assistance, call a licensed electrician or your local power company. When used outside the United States of America, please use a proper adapter that ensures grounding and polarization. Although the Models III BR and ABR are approved to the standards of UL and CSA, they are not intended to meet approval in all countries worldwide. 4 KODAK EKTAGRAPHIC III Slide Projector Operation Models A, AMT and ATS Open the storage compartment and remove the remote control. Plug the 5-pin cable remote connector into the remote-control receptacle, aligning the raised dot with the metallic rivet head. This receptacle also accepts plugs for accessories, such as Kodak dissolve controls. Plug the power cord into a grounded outlet with 110- to 125-volt 60 Hz current only. KODAK EKTAGRAPHIC III Slide Projector 5 Operation Loading the Slide Tray A KODAK EKTAGRAPHIC Universal Slide Tray is designed to hold up to 80 slides. Be sure that your slide mounts are in good condition; frayed or bent mounts may fail to drop into the projector. A variety of slide trays are available with capacity up to 140 slides. See your dealer in Kodak products for a complete list of Kodak trays and accessories. Note: Do not attempt to project slides mounted with sticky or loose tape. Place the tray over the center post of the projector. Align the "0" slot with the gate index; the tray will drop into position. If your 80-slide tray does not drop easily, rotate the metal plate on the bottom of the tray until it locks into position. For a 140-slide tray, secure the lock ring, invert the tray, and align the index hole with the index notch. Slide and hold the tray release latch in the direction of the arrow, and turn the bottom plate until the index hole and notch align. Then release the latch. 80-Slide Tray 6 140-Slide Tray KODAK EKTAGRAPHIC III Slide Projector Operation Front-Screen Projection Remove the lock ring by turning it counterclockwise and lifting it off. Check each slide’s orientation (horizontal or vertical), and arrange them in the order you wish to show them. Then turn the slides upside down. Number each mount in the upper right-hand corner of the film’s shiny side. Insert your first slide into the first slot in the tray so that the number is visible on the outer circumference of the tray. Insert your second slide in the second slot with the emulsion (dull side) facing your first slide, and so on. KODAK EKTAGRAPHIC III Slide Projector 7 Operation Replace the lock ring by turning it clockwise until it is secure Rear-Screen Projection You can easily adapt a show from front- to rear-screen projection. Remove each slide from the tray and turn it around (keeping the slide upside down). This will give the projected slide a mirror image on the screen. Insert your first slide back into the first slot in the tray. The number is now visible in the inner circumference of the tray. Replace the lock ring by turning it clockwise until it is secure. With a Dissolve Control 8 When you use a dissolve control, put your slides into two trays (one for oddand one for even-numbered slides). KODAK EKTAGRAPHIC III Slide Projector Operation Tray Removing the Tray Place the loaded slide tray on the projector. Align the tray index bar with the gate index. The tray will drop into position. To remove the slide tray: • press the select bar all the way down • align the tray index bar with the gate index. You can then lift off the tray. Raised Index Mark This feature allows you to coordinate tray starting positions for multiple-projector presentations. For an 80-slide tray in the zero position, the raised index mark is at slot 20. If you start with slide 6, it will align at slot 26. For a 140-slide tray in the zero position, the index mark is at slot 35. So, if you start with slide 12, it will align at slot 47. KODAK EKTAGRAPHIC III Slide Projector 9 Operation Projecting Your Slides Lens To insert a lens, push the focus knob up and position the lens gear teeth on the lens barrel with the notch on the projector. Lamp Slide the power switch to half lamp (for longer lamp life) or lamp (for maximum brightness). You may want to keep a spare KODAK EC Lamp Module (CAT 831 3587) handy in case the lamp burns out during a presentation. Replacing the entire module makes the change quick and easy. (See “Maintenance” on page 21 for instructions on changing the lamp module.) See your dealer in Kodak products to order this module. 10 KODAK EKTAGRAPHIC III Slide Projector Operation Forward and Reverse Press the forward button on the projector or the remote control to project the first slide. To change slides, briefly press the forward or reverse buttons. Focus Focus your first slide using the focus knob on the projector or the focus button on the remote control. Autofocus (Models A, AMT, and ATS only) With autofocus on, the projector automatically focuses each slide, after you focus your first slide manually. Turn autofocus off if glass slides make the autofocus motor run continuously. Random Projection For random projection of any slide in the tray: • press and hold down the select bar, • rotate the tray to the desired slide, and • release the select bar. KODAK EKTAGRAPHIC III Slide Projector 11 Operation Screen Image Use the elevating foot to horizontally center the projected image on the screen. To release the foot, press the release button, while lifting the front of the projector to the desired height. Use the elevating wheel to make fine adjustments. If the image is not level, make an adjustment by turning the leveling foot at the rear of the projector. Timer (Models AMT & ATS only) 12 To time your slides, use the timer switch for slide changes from 3 to 22 seconds. To interrupt the timer, press either the forward or reverse button. For manual operation, slide the timer switch to Off. KODAK EKTAGRAPHIC III Slide Projector Operation Reading Light To illuminate a small area for reading, lift the reading light cover while the projector lamp is on. Standby Light (Model E Plus only) A glowing standby light indicates a “ready” condition. In a dissolve program, it indicates that • both projectors are receiving power • both power switches are set at fan • both projection lamps are properly installed, not burned out, and ready • both standby lights are operational • all thermal fuses are functional Special-Application The special-application receptacle allows additional external control and programming capability. It provides 22.5 V low-voltage power isolated from Receptacle the main power line. Use this receptacle for: • automatic “return-to-zero” devices (models A and E Plus) • a low-voltage power supply • a dark shutter switch The receptacle accepts 8-pin plugs and DIN-type plugs with 3 or 5 pins at 180˚. (See “Appendix A” for contact identification descriptions.) KODAK EKTAGRAPHIC III Slide Projector 13 Operation Important All equipment, cables, and connectors used with the special-application receptacle must be assembled by qualified electronic personnel All circuits connected electrically to the projector through this receptacle must have a rating of not more than 30 V (rms) and must comply with Underwriters Laboratories, Inc., low-voltage, limited energy circuit requirements.1 Single Slides To project single slides, slide the power switch to a half- or full-lamp position. Remove the tray and insert a slide upside down into the projector gate. Push the slide all the way down. After viewing the slide, press forward, reverse, or the select bar to eject the slide. Selecting Slide Projection Lenses When buying a lens, consider features such as focal length (measured in millimetres), aperture (designed as an f/stop), and the lens design (curved or flat). When selecting a lens, remember that the shorter the focal length (i.e., the smaller the f/number), the brighter the projected image. Also, a curved-field lens, in combination with cardboard open face mounts from an automated mounting process, provide superior projection quality. A flat-field lens is the best choice for glass-mounted slides. 1.UL-122, Photographic Equipment, Underwriters Laboratories, Inc., 33 Pfingsten Road, Northbrook, IL 60062-2096; CSA Specification C222, Number 118-1959 (R1965), Picture Machines Appliances, CSA, 178 Rexdale Boulevard, Rexdale, Ontario M9W 1R3 Canada. 14 KODAK EKTAGRAPHIC III Slide Projector Operation Choosing a Curved- The lens you select depends on how you use your projector and what type of slide mount you use. So that you may choose the lens that best meets your or Flat-Field Lens needs, we do not include a lens with the projector. To obtain the best results of a projected image, insert slides with the emulsion side toward the projection lens, slide curve toward the light source. A flat-field lens works best for: • general home projection • glass mounts • plastic mounts • mixed mounts • non-embossed cardboard mounts • rear-projection applications • duplicated slides A curved-field lens works best for: • embossed cardboard mounts (Embossed mounts have beveled edges around the aperture. Kodak Premium Processing and Kodak Processing labs provide embossed mounts.) Lens Focal Length/ Use the illustration on the following page to help determine the lens focal Projector Distance length and projector distance. KODAK EKTAGRAPHIC III Slide Projector 15 Operation 16 L D 75 mm 13.3’ 100 mm 17.7’ 125 mm 22.2’ 150 mm 26.6’ 175 mm 31.0’ 200 mm 35.4’ KODAK EKTAGRAPHIC III Slide Projector Operation Editing Your Presentation Removing the Lock Ring To add or remove slides in the tray, you must first remove the lock ring. Turn the ring counterclockwise and lift off. Removing a Slide Rotate the tray to the slide you wish to remove. Firmly press and hold down the select bar to eject the slide. Adding a Slide When the lock ring is off, you can add a slide to any empty slot. (See “Front-Screen Projection” on page 7.) Replace and secure the lock ring. KODAK EKTAGRAPHIC III Slide Projector 17 Operation Clearing a Gate Jam To remove a defective slide or foreign object stuck in the projector gate, you need to remove the tray. • Slide the tray release latch in the direction of the arrow, and • with your other hand, lift off the back of the tray. Rotate the metal plate on the bottom of the tray until it locks into position. (For a 140-slide tray, see “Loading the Slide Tray” on page 6.) Put the tray aside. Remove the slide or object from the projector gate by pressing the forward button or removing the slide manually. Remount damaged slides to protect your projector and slides from subsequent damage. 18 KODAK EKTAGRAPHIC III Slide Projector Operation Using the Built-In Viewer (Model ATS Only) Important Before opening the viewer, you must remove the projection lens from the projector. Removing the Lens Turn the focus knob to the horizontal position. Push the knob toward the top of the projector as you withdraw the lens. Opening the Viewer Grasp the viewer handle and pull it out from the base of the projector. It will pop into place. Slide the power switch to lamp to project your slides. Closing the Viewer To close the viewer, fold it and push it back into the body of the projector. KODAK EKTAGRAPHIC III Slide Projector 19 Operation Reinserting the Lens To reinsert the lens, push the focus knob up and position the lens gear teeth on the lens barrel with the notch on the projector. Using a Dissolve Control One of the more common uses for a dissolve control is a simple two-projector fade. This feature fades down the light beam in one projector, while changing the image and fading up the light beam in the other projector. This eliminates a dark-screen interval. When using a dissolve control, you need to divide your slides into two trays (odd- and even-numbered slides). The dissolve control has two connectors that plug into the remote-control receptacles in the rear of two projectors. Refer to your dissolve-control operating manual for additional instructions and features. See your dealer in Kodak products for more information on Kodak dissolve controls. Shutdown To shut down, • remove and store the tray • slide the power switch to off Your projector will remain warm for several minutes. 20 KODAK EKTAGRAPHIC III Slide Projector Maintenance To ensure a long life and trouble-free operation for your projector: • Allow the air to flow freely around the projector. • Do not recirculate warm air. • Keep the projector dust free. • If your projector is chilled, bring it to room temperature before operating. Projection Lamps Quartz-halogen 82 V projection lamps— Included: EXR, 300 W (35-hour lamp life at full lamp/medium-brightness) Sampling of other lamps: EXY (200 hours/less brightness) EXW (15 hours/maximum brightness) FHS (70 hours/medium brightness) Use combinations of lamp brightness, plus half- and full-lamp settings to approximate image brightness in multi-projector presentations. Desired Brightness Lamp Tips EKTAGRPAHIC III Projector Lamp Maximum EXW High EXR Medium FHS Low EXY • Projector operation on line voltages above 125 volts greatly reduces the lamp life. • Unplug the projector before changing the lamp. • Allow for unrestricted flow of air to the exhaust vent to prolong lamp life. • Gently wipe off any fingerprints with a soft cloth moistened with rubbing alcohol. KODAK EKTAGRAPHIC III Slide Projector 21 Maintenance Changing the Projection Lamp Slide the power switch to Off and unplug the projector. Allow the projector and lamp to cool for about 10 minutes. Push the lamp-module release button and remove the lamp module. You can replace it with a new lamp module or replace only the lamp. Note: There is an additional safety latch, which reduces the chance of an accident with a loosely inserted lamp module, that may cause some resistance. To release the latch, you may need to apply extra effort when you pull out the module. To replace only the lamp, lift up the lamp release clip. Carefully remove the worn lamp from the socket and place it on a heat-resistant surface. Insert a new lamp into the socket. Push down to tightly seat the replacement lamp. Relatch the clip in the forward position and push the lamp module all the way back into the projector until it latches. 22 KODAK EKTAGRAPHIC III Slide Projector Maintenance Cleaning the Condenser, Heat-Absorbing Glass, and Mirror To clean the condenser, heat-absorbing glass, or mirror, you must disassemble the lamp module. Slide the power switch to Off and unplug the projector. Allow the projector to cool about 10 minutes. Push the lamp-module release button and remove the lamp module. Use a torx-head screwdriver to remove the screw. Using a flat-blade screwdriver, apply ample pressure to release each of the metal tabs. Lift off the top of the lamp module. KODAK EKTAGRAPHIC III Slide Projector 23 Maintenance Condenser Lens You can clean the condenser lens in place, or by pulling it out. Wear gloves to prevent fingerprints. Heat-Absorbing Glass (Models without KODAK Extra Bright Lamp Module) The heat-absorbing glass is fragile. Handle it only when cool. Caution The heat-absorbing glass easily removes for cleaning. Clean both sides of the condenser lens and the heat-absorbing glass with a soft, lint-free cloth. Do not leave fingerprints. Replace the lens and heat-absorbing glass to their original locations. 24 KODAK EKTAGRAPHIC III Slide Projector Maintenance Reassembling the Lamp Module To reassemble the lamp module, you will need to align and insert each tab into its appropriate slot. Start with the tabs in the rear of the lamp module. Insert the remainder of the tabs into slots until all 7 tabs on the top and 2 on the bottom are secured. Insert the screw and tighten. Then insert and seat the lamp. KODAK EKTAGRAPHIC III Slide Projector 25 Maintenance Mirror To clean the mirror, invert the lamp module to reach the mirror. Gently clean the mirror with a soft, lint-free cloth moistened with lens cleaner. When your maintenance is complete, push the lamp module back into the projector. Thermal Fuses 26 Your projector has two thermal fuses that prevent overheating. If your projector will not operate, call the Kodak Information Center or Kodak in your country to obtain the name of a service center nearest you (see “How to Obtain Service” on page 30). KODAK EKTAGRAPHIC III Slide Projector Troubleshooting Consult this guide before calling for service. PROBLEM CAUSE CORRECTION Projector does not operate No power to projector Plug power cord into suitable electrical outlet. Set power switch to Lamp. No illumination on screen with slide in projector gate Power switch on Off or Fan Set switch to Lamp. Lamp burned out Install new lamp or lamp module Lamp not seated in socket Check lamp. Slide itself not sharp Examine slide for proper focus. First slide in tray not properly Focus center of first slide. Slide in different type of mount from others Focus manually. Projection lens installed improperly Read and follow the instructions for installing the lens. Slide itself is not sharp Examine slide. Curved field lens used with glass, plastic, or non-embosssed mounts Try a flat field lens. (See “Choosing a Curved- or Flat-Field Lens” on page 15.) Curved field lens used for rear projection Use a flat field lens. Autofocus motor runs continuously Glass slides in tray Turn off autofocus or use slides with mounts other than glass. Autofocus fails to operate Lamp performance Install new lamp and try autofocus again. Slide not in proper focus on screen focus. Uneven edge-to-edge focus KODAK EKTAGRAPHIC III Slide Projector 27 Troubleshooting PROBLEM Slide fails to drop into projection position Uneven illumination on screen Projector won't cycle to next slide Program does not start with the with the correct slide 28 CAUSE CORRECTION Tray base plate not properly indexed Rotate the tray base plate until it locks into position. Tray not properly positioned on projector Reposition tray on projector. Slide mount warped or frayed at corners slide. Straighten mount or remount slide. Projector not level or tilted too high Set projector on a stand equal with center of screen. Projection lamp not fully seated Check lamp. Condenser lens not installed or not positioned properly in mount Check condenser lens. Slide mount not seated properly in projector gate Check slide position and slidemount condition. Tray not properly positioned Reposition tray. Slide or foreign object stuck in gate See "Clearing a Gate Jam" on page 18. Tray number is not aligned with the with the raised index mark. Reposition tray (see “Tray” on page 9). KODAK EKTAGRAPHIC III Slide Projector Warranty Kodak warrants this KODAK EKTAGRAPHIC Slide Projector to function properly for four years from the date of purchase. If this KODAK EKTAGRAPHIC Slide Projector does not function properly within the warranty period, upon submission of dated proof of purchase, Kodak will repair it without charge, except for worn-out projector lamps. If Kodak is unable to repair the projector, the option of replacement or refund of the purchase price will be available. See an audiovisual products dealer in your country for the KODAK EKTAGRAPHIC III ABR Slide Projector's warranty coverage. Limitations This warranty does not cover circumstances beyond Kodak’s control, projector lamps, or problems caused by failure to follow the care and operating instructions in the manual. Any modification to the original design of this projector nullifies this warranty. Warranty service will not be provided without dated proof of purchase. Kodak makes no other express warranty for this product. Repair or replacement is Kodak’s only obligation. Kodak will not be responsible for any consequential or incidental damages resulting from the sale or use of this projector, regardless of the cause of such damages. Your Rights Under State Law Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state. KODAK EKTAGRAPHIC III Slide Projector 29 How to Obtain Service Assistance U.S.: 1-800-242-2424 Canada: 1-800-465-6325 www.kodak.com/go/projectors To obtain service or for assistance in using your KODAK EKTAGRAPHIC Slide Projector, contact the Kodak Information Center at 1-800-242-2424, Monday through Friday, 8 a.m. to 8 p.m. (Eastern time). In Canada, call 1-800-465-6325, Monday through Friday, 8:30 a.m. to 5 p.m. (Eastern time). Or call Kodak in your country. Shipping Instructions 30 To help us get your KODAK EKTAGRAPHIC Slide Projector back to you promptly, please enclose a note giving details of the problem, dated proof of purchase, and your complete name and shipping address. Pack the unit in a sturdy carton with ample packing material to protect the unit during shipping and handling. KODAK EKTAGRAPHIC III Slide Projector Appendix A Special-Application Receptacle Identification Chart Contacts Function Description 1&3 Zero-Position Switch (Models A and E Plus) Connects to an internal single-pole single-throw normally open switch. Contacts are closed when the slide tray is at any position other than zero. These leads connect only to the switch terminals. Do not exceed a switching load of 1 A at 30 V ac. 4&5 Shutter Switch Connects to an internal single-pole single-throw normally closed switch. Contacts are open when a slide is in the projector gate and the shutter is open. These leads connect only to the switch terminals. Do not exceed a switching load of 1 A at 30 V ac. 7&8 Low-Voltage Supply For operating external equipment. The current is supplied by a secondary winding on the main motor, isolated from the line-voltage power, and is available whenever the main projector motor is running. Supply is 25.5 V, 500 mA (1/2 A) maximum. Contact number 8 is common (return) for the remote-control circuit. Contact number 7 is the “hot” lead and is fused with a slow-blowing fuse. (Replacement requires disassembly of the projector by a qualified technician.) 6&8 Forward Tray Connects to the forward tray-advance circuitry in the projector. These contacts are connected internally to the remote-control receptacle and an electrical connection made at either receptacle will result in a forward cycle. 2&8 Reverse Tray Cycle Connects to the reverse tray-advance circuitry in the projector. These contacts are connected internally to the remote-control receptacle and an electrical connection made at either receptacle will result in a reverse cycle. Shell Plug Ground If a plug with a conducting shell is used, it is connected to the projector frame (chassis) through the special-application receptacle and to earth ground through the projector's power cable. KODAK EKTAGRAPHIC III Slide Projector 31 Presentation Technologies EASTMAN KODKCOMPANY Rochester, New York 14650 www.kodak.com/go/projectors Kodak, Ektagraphic, and kodalux are trademarks. PRESENTATION TECHNOLOGIES Part No. 5B905 12/98 Revision ©EastmanKodak Company Printed In U.S.A.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 38 Page Mode : UseOutlines Producer : Acrobat Distiller Command 3.01 for Solaris 2.3 and later (SPARC) Title : ektg_iii Creator : FrameMaker 5.5.6. Modify Date : 2000:08:24 09:39:18 Create Date : 1997:01:22 07:24:11EXIF Metadata provided by EXIF.tools