Koden Electronics RB714A Marine Radar RA40C User Manual 15
Koden Electronics Co., Ltd Marine Radar RA40C 15
Contents
15
5.5.4.5 Changing the content of the setting (CUSTOM) Note) Items in CUSTOM are for conducting settings and adjustments at the time of installation, which need not be conducted normally. -Common operations for CUSTOM Use the up-down cursor keys to select CUSTOM after ”the common operations for the SETUP” menu, and press either the "ENT" key. MENU •→ Left/Right → (Select SETUP) Up/Down → ENT (Select CUSTOM) Common operation for SETUP When the above operations have been conducted, 4 items, namely "KEY ASSIGN", "PRESET1", "PRESET2" and "ADJUST", are displayed beside the CUSTOM item. Further explanation concerning the CUSTOM menu items will be done on the assumption that the above "common operations for CUSTOM" have already been conducted. .75 .25 HU S >>> 0.23NM SETUP SETUP ECHO SETUP WINDOW SEL WIN PICTURE SYSTEM CHECK NAV KEY ASSIGN PRESET1 PRESET2 NMEA PRESET ADJUST 68 CUSTOM 5.5.4.5.1 Changing the settings of soft keys (KEY ASSIGN) Conducting alterations and new settings for the functions of keys with number displays of 1-7. (1) Screen display for the setting When KEY ASSIGN has been selected with the up-down cursor keys from among the CUSTOM items and the "ENT" key is pressed, the setting screen is displayed. (See chart below) MARK NAV ECHO SETUP @BL1 @RM1 @BL2 @RM2 @L EBL2 @L VRM2 @ DG OFF /@//CSR @ INGS @AR RNG @ARGET @MK LINE @ ODE @Z @ FF-C @LEEP @UNE @T @RACK @OOM @ ^ @EL WIN @ICTURE @PI @PI/3D @PI/PPI @PI/NAV @LL PPI @LL PPI2 @ EXT KEY ASSIGNMENT EBL1 EBL2 RINGS PPI VRM1 VRM2 TUNE PPI/3D VAR RNG FL EBL2 ST PPI/PPI TRACK FL VRM2 ZOOM PPI/NAV TARGET GZ SLEEP ALL PPI SEL WIN OFF-C PICTURE ALL PPI2 NEXT NEXT NEXT NEXT SET1 SET2 SET3 SET4 Move with up-down cursor Key Groups Move with right-left cursor Mark is displayed when the function is set to a key. Operation panel Keys 1 - 7 Soft Key Setting Screen (2) Selecting functions Reverse the items to be set using the up-down cursor keys. (The items become reverse in accordance with the moving cursor.) (3) Key settings (3)-1 Making new settings (Example 1) For allocating the selected item to a soft key, press the key to be allocated. The selected item will be displayed beside the key, which indicates that the setting has been conducted. (3)-2 Changing the function of a key with an preset function (Example 2) When the allocated key is pressed, its function will be altered to the one selected in (1) above and the previous function will be canceled. The current settings for SET1-4 will be displayed below NEXT. In order to switch the settings SET1-4, use the right-left cursor keys. (Double settings (setting 1 item for more 69 than 1 key) are possible.) When settings are to be conducted for more than 1 key, repeat the operations (3)-1 to (3)-2. (Example 3) (4) Completing the setting After the setting has been finished, press the ENT key to exit from KEY ASSIGNMENT. Example of an operation (The process up to the selection of KEY ASSIGNMENT from the SETUP menu is omitted. Only the process after the above chart will be described.) Example 1) Altering OFF-C allocated to key 6 in setting 2 to HDG OFF. → Up/Down Select HDG OFF Example 2) Left/Right → The display beside key 6 changes to HDG OFF ENT ----------------------------Key 6 altered from Exit from KEY ASSIGNMENT OFF-C to HDG OFF Re-allocate SEL WIN to key 1 in setting 2. → Up/Down → select SEL WIN SEL WIN is displayed Exit from is altered to SEL WIN beside key 1. KEY ASSIGNMENT From SET1 to SET2 → ENT -------------------Key 1 in setting 2 Example 3) Alter key 1 in setting 1 from ST to HDG OFF and then reset key 1 in setting 2 as SEL W IN. → Up/Down Select HDG OFF Left/Right → The display beside key 6 changes to HDG OFF Up/Down Select SEL WIN From SET1 -------------- → Key 6 altered from ST SEL WIN is displayed Exit from KEY ASSIGNMENT 70 HDG OFF → ENT ----------------------------Key beside key 1. to SET2 to is altered to SEL WIN
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 2000:07:28 07:26:31 Producer : Acrobat Distiller 4.0 for Windows Modify Date : 2000:07:28 07:26:32-04:00 Page Count : 3EXIF Metadata provided by EXIF.tools