Koden Electronics RB716A Marine Radar RA42C User Manual 02

Koden Electronics Co., Ltd Marine Radar RA42C 02

02

iTo prevent the risk of personal injury or damage to the equipment, the followingsafety symbols are used to indicate safety-related information. Insure that you clearlyunderstand the meanings of the symbols BEFORE using the equipment.Symbols Used in ManualThis indicates a very dangerous procedure that could resultin serious injury or death if not performed properly.This indicates a hazardous procedure that could result inserious injury or death if not performed properly.This indicates a hazardous procedure or danger that couldresult in light-to-severe injury, or that might damage theequipment, if proper precautions are not taken.Safety Symbols Used on EquipmentThe following safety symbols are used inside or on the equipment near operation lo-cations to provide information about safety items and operation precautions. Insurethat you clearly understand the meanings of the symbols and take the necessary pre-cautions BEFORE using the equipment.This indicates high voltages with a risk of serious electric shock if the partis touched. NEVER touch the part with bare hands, etc.The symbol prohibits the operation shown inside the symbol. (The ex-ample in the left prohibits disassembly.)The symbol indicates that the operation inside the symbol is potentiallyhazardous. (The example on the left indicates that the plug should be heldwhen disconnecting it from the AC outlet.)This indicates the ground (earth) terminal. If the equipment cannot begrounded via the power cord, connect this terminal to ground. There is arisk of serious electric shock if the equipment is not grounded.RA40C/RA41C/RA42CMarine RadarInstruction Manual21st Jul. 2000 (1st Edition)Document: E-A40C/41C/42C-2-00Safety SymbolsDANGER!WARNING!CAUTION!
ii•DO NOT OPEN THE COVER EXCEPT SERVICE PERSONNEL. YOU MAY GET AN ELECTRIC SHOCK.•SWITCH OFF SHIPS MAIN AND PULL OFF MOTOR FUSE BEFORE MAINTENANCE. ROTATING ANTENNA MAY HIT YOU.• KEEP OFF DURING TRANSMISSION. RADIATION LEVEL: 100W/m2 DISTANCE : 0.8m RADIATION LEVEL: 10W/m2 DISTANCE : 8m• DO NOT DROP COVER. IT MAY HIT SOMEBODY.• •••••••••••••••••••••• •••••••••••••• •••••••••••••••••••••••• •••••••• •••••••••••••••••••••••••• ••••••••••••••• ••••• : 100W/m2 •• : 0.8m ••••• : 10W/m2 •• : 8m• •••••••••••••••••• ••••••••••••DO NOT PAINT THE RADOME. PERFORMANCE WILL DOWN.• •••••••••••••••••••• •••••••• WARNING and CAUTION for Scanner Unit and Antenna ;!There is a risk of receiving electric shock if these parts are touched byaccident. Only qualified personnel should remove covers on theseparts."To avoid accidental antenna rotation, turn off ship’s main and pull offout the motor fuse during repair inspect, or maintenance.When repairing or inspecting the scanner unit wear a safety harnessand provide a secure platform so that there is no danger of falling evenwhen the vessel lists or when there is an unexpected incident such asan earth quake.#Do not approach the antenna while it is transmitting.In addition, at inspection never look into the wave guide during trans-mission.$When remove the scanner cover etc., do not drop it. It may endangerpeople below.%Do not paint the RADOME. Antenna performance will be down.For SafetyWARNING / • •CAUTION / • ••••••
iii • SEE INSTRUCT ION MANUALS BEFORE CONNECTING POWER. SAFETY INFORMATION IS WRITTEN IN. • EARTH CONNECTION ESSENTIAL BEFORE CONNECTING POWER. YOU MAY GET AN ELECTRIC SHOCK. • DO NOT OPEN THE COVER EXCEPT SERVICE PERSONNEL. HIGH VOLTAGE IS INSIDE. YOU MAY GET AN ELECTRIC SHOCK. • ••••••••••••• •••••••••••• •••••••••••••• • •••••••••••••• ••••••••• •••••••••••• • ••••••••••••• •••••••••• •••••••••••••• ••••••WARNING for Display Unit ;!See instruction manuals before connecting power. Safety information iswritten in. "Earth connection essential before connecting supply.There is a risk of serious electric shock if the equipment is notgrounded.#There is a risk of receiving electric shock if these parts are touched byaccident.Only qualified personnel should remove covers on these parts.WARNING / • ••••
ivInstallationRadio laws dictate that this radar may only be installed by properly licensed personnel.LicensingYou must obtain a license as prescribed by the Radio Law to operate this unit.To Customers* To use this equipment effectively, the operation and maintenance procedure in this manualmust be followed properly. Note that this equipment is only a navigational instrument hav-ing no warrant for navigation safety. Non-execution of fundamental navigation require-ments such as the ship location check or lookout is not allowed.* If some abnormality occurs in this equipment, immediately turn off the equipment POWERswitch and the radar main switch in the power distribution board and notify our mainte-nance section or dealer.* This instrument uses oscillator and LCD backlight. They are easy to be broken. Do notsubject the instrument to excessive force or drop it.* The mercury (Hg) is used in LCD backlight. When you discard your radar, it is due to lawsor regulations of your nations.

Navigation menu