Koden Electronics RB716A Marine Radar RA42C User Manual 12

Koden Electronics Co., Ltd Marine Radar RA42C 12

12

715.5.4.5.2 Changing the content of settings 1(PRESET1)(1) When PRESET1 is selected from CUSTOM items and the "ENT" key is pressed, thePRESET1 screen (See chart below) appears.(2) Select items with up-down keys and contents with left-right keys.The selected items will be enclosed by square frames and the contents will appear inreversed display. (a)Repeat this operation when multiple settings are to be made.(3) After the setting is completed, exit from the PRESET1 screen with the "ENT" key.Note) The contents will be displayed in (b) together with the numbers selected in P TABLE.•• Heading Flash Each revolution of the antenna turns the heading markeron and off.b) Stern Mark Display/non-display of the stern linec) North Mark Display/non-display of the north mark•• ST'BY screen Setting the screen display in stand-byNAVI: Navigation Data screenNOR: Normal screene) Buzzer Volume Setting the volume of the buzzera) Heading Flash b) Stern Mark c) North Mark d) ST'BY screen e) Buzzer Volume f) VRM Unit g) Water temperature h) Depth Unit i) EBL Mode j) WayPoint Mode k) Heading Input l) Heading Type m) Cursor position n) TX Pulse PRESET1 HM FLASH ON _OFF_ STERN M ON _OFF_ NORTH M ON _OFF_ ST’BY _NAVI_ NOR BUZ VOL OFF LOW _HIGH_ RM UNIT _NM_ KM SM TEMP °°°°C_ °°°°‚e DEPTH _M_ FT FM EBL BRG _REL_ TRUE MAG WP BRG _TRUE_ MAG HEAD INPUT _NMEA_ SIN/COS 12BIT 10BIT HEAD TRUE _MAG_ +MK MODE _DIST / BRG_ LAT / LON P TABLE 0 _1_ 2 .5 .75 1.5 3 6 P TABLE _1_ SHORT 0 0 0 1 1 LONG 0 1 1 2 2 (a) (b)
72•• VRM Unit Setting VRM unit••NM: Nautical mile••KM: Kilometer••SM: Statute mileg) Water temperature Setting water temperatureunit°C: CelsiusF: Fahrenheith) Depth Unit Setting Depth unitM: MeterFT: FeetFM: Fathomi) EBL Mode Setting Mode of EBLREL: Relative bearing from HMTRUE: True bearingMAG: Magnetic bearingj) WayPoint Mode Setting WayPoint bearing modeTRUE: True bearingMAG: Magnetic bearingk) Heading Source Setting Heading source;NMEASIN/COS: Compass Data with SIN/COS signal12BIT: Compass Data with 12bits serial signal10BIT: Compass Data with 10bits serial signall) Heading Type Heading Information Type settingMAG: Magnetic bearingTRUE: True bearingm) Cross cursor position display ModeDIST/BRG: Range and Bearing indicationLAT/LON: Latitude and Longitude indicationn) Transmitting pulse width Pulse setting for Range (Note: )Note: P TABLEPUSLETYPE•0.25NM 0.5 0.75 NM NM1.5NM3NM6NM•12NMP TABLE 0 SHORT 0 0 0 0 0 1 2 LONG 0 0 0 1 1 2 2P TABLE 1 SHORT 0 0 • 0 011 2 LONG 0 0 1122 2P TABLE 2 SHORT 0 0 0 1 1 1 2 LONG 0 1 1222 2Note• RA40C Pulse width 0 : 0.12 uS, 1 : 0.3 uS, 2 : 0.8 uS ΡΑ41Χ/42Χ Πυλσε ωιδτη 0 : 0.08 uS, 1 : 0.25 uS, 2 : 0.8 uSHeading MarkerStern Marker.75.25HU
73

Navigation menu