Swann 1080p Pan & Tilt Wi Fi Camera Quick Start Guide SWN SWWHD PTCAM AU

2017-09-22

: Kogan Swn-Swwhd-Ptcam-Au SWN-SWWHD-PTCAM-AU SWN-SWWHD-PTCAM-AU usermanuals files

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadSwann 1080p Pan & Tilt Wi-Fi Camera Quick Start Guide  SWN-SWWHD-PTCAM-AU
Open PDF In BrowserView PDF
Getting to know your Pan & Tilt Wi-Fi Camera
Security Made Smarter
Light Sensor
Detects ambient light
and turns on the infrared
LEDS for night vision, if
necessary

1080p Pan & Tilt
Wi-Fi Camera

Speaker

Power LED
OFF
ON

Quick Start Guide

Infrared LEDS

Microphone
Wi-Fi LED
Unconnected state
Connected state

Threaded
Mounting Hole (Bottom)

Limited Warranty Terms & Conditions

Swann Communications warrants this product against defects in workmanship and material for a period of one (1) year
from its original purchase date. You must present your receipt as proof of date of purchase for warranty validation. Any
unit which proves defective during the stated period will be repaired without charge for parts or labour or replaced at
the sole discretion of Swann. The end user is responsible for all freight charges incurred to send the product to Swann’s
repair centres. The end user is responsible for all shipping costs incurred when shipping from and to any country other
than the country of origin.
The warranty does not cover any incidental, accidental or consequential damages arising from the use of or the
inability to use this product. Any costs associated with the fitting or removal of this product by a tradesman or other
person or any other costs associated with its use are the responsibility of the end user. This warranty applies to the
original purchaser of the product only and is not transferable to any third party. Unauthorized end user or third party
modifications to any component or evidence of misuse or abuse of the device will render all warranties void.
By law some countries do not allow limitations on certain exclusions in this warranty. Where applicable by local laws,
regulations and legal rights will take precedence.
For Australia: Our goods come with guarantees which cannot be excluded under Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and
the failure does not amount to major failure.

FCC Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) This device must accept any interference received, including interference
that may cause undesired operation.

Prefer to mount your camera?
Just attach the included
mounting bracket to the wall,
then line the threaded hole on
the bottom of the camera up
with the threaded stud on the
mounting bracket and tighten
the knob to secure the camera

Dual-Band
Wi-Fi Antenna

Reset Button

USB Power Port

Hold for 10 seconds
to perform a factory
reset. This will reboot
the camera and clear
all settings to factory
defaults, including
previously configured
Wi-Fi settings, so you
can set up your camera
again, if needed

Restarting your camera
can sometimes quickly
resolve a problem—just
disconnect the USB cable,
and then plug it back in

NEED HELP?
USA & Canada 1800 627 2799

Australia

UK & Europe

New Zealand 0800 479 266

tech@swann.com

0808 168 9031

1800 788 210

support.swann.com

QSGPTCAMVER1E | © Swann Communications 2017

Ethernet Port

MicroSD Card Slot

Used for wired
connection/setup

Never miss the moment—Put in a
microSD card to record and save
motion-activated events

Quick start: Setup via Wi-Fi
Setting up your camera is quick and easy. Just follow these simple steps.

1

•

Download and install the latest version of the AlwaysSafe app from
the Apple App Store or Google Play Store on your smartphone.

Connect the camera to the power adapter using the included USB
cable, then plug the power adapter into a power outlet.

Power Adapter

The camera supports both 2.4GHz and 5GHz Wi-Fi networks. Try
experimenting with both bands to see which one gives you better performance.
As a general rule, the 5GHz band has a shorter range but is great for high
bandwidth activities like online video streaming. The 2.4GHz band is better for
long range but is more prone to interference from other wireless devices.

•

If your home Wi-Fi network does not immediately appear in the list of

3

available Wi-Fi networks during the in-app setup, simply tap
again and refresh the list.

Create a password for the camera when prompted by the app. (Please note
the username of the camera is “admin”.) Password protection is designed to
prevent someone from accessing your camera on another device.

•

Want to securely share access to your camera with family members? We’ve
made it easy—simply install the AlwaysSafe app on their smartphone, open
the app, then tap + and scan the QR code you are sharing on your smartphone
(tap Camera Menu > ). The app will automatically pick up your camera. To
log into your camera, provide your camera’s password (one-time process).
From here on, your camera can be viewed at anytime from their smartphone
as long as there is internet access.

Alternative setup
via Ethernet connection

The camera will begin rotating as part of its startup sequence.

If, for any reason, you’re having trouble joining the camera to your
Wi-Fi network wirelessly, try using Ethernet instead to configure the
camera’s initial Wi-Fi settings.

1

Search and playback events
recorded on the MicroSD card
Tap to return to the
Devices screen

Multi-camera window
options
Tip: Only one camera can
be displayed at a time if
streaming in “Clear” quality

Tap to change the quality of
the video stream between
Fluent (smoother movement)
and Clear (higher quality)

Tap to pan & tilt camera
Tip: For continuous
movement, drag and hold
joystick in desired direction

Tap to use the talk function
Tip: It’s not unusual to hear audio
feedback (echo, high-pitched
noise)—the camera’s mic is
very sensitive (so you don’t miss
hearing anything!) Try plugging
in your earphones for a better
experience!

Connect the camera to your Wi-Fi router using the included
Ethernet cable, and if you have not already done so, connect
the camera to power. Note: You will not hear instructions
from the camera when it detects the Ethernet connection.

Wi-Fi
Router
Ethernet Cable

Devices screen
Manually add a camera using
the QR code scan method

........................................................................
..................................................................
....................................................

2

Make sure your smartphone is connected to the same Wi-Fi
router as the camera, then open the AlwaysSafe app. The app
will automatically detect and add the camera.

3

From the preview window of the camera, tap
, then choose a
Wi-Fi network for the camera to join. Make sure to tap
at the
top right to save the camera’s new Wi-Fi settings.
You can now unplug the Ethernet cable and move the camera to
the desired location—as long as it is within range of your Wi-Fi
router, the camera will automatically reconnect. Or you can also
continue using the Ethernet connection—it can often provide
a faster and more reliable internet connection but camera
placement will be limited by the length of the Ethernet cable.

HEADS-UP!
Open the AlwaysSafe app when prompted,
then wait for the app to detect the camera,
and tap OK once the setup box appears on
the screen to continue with the setup.

Note: The camera’s Wi-Fi configuration mode times out in 10 minutes.
Simply restart the camera if you need more time to set it up.

4

Preview window.
Tap to start live view

LAN

Please open the Wi-Fi settings
option on your smartphone and
connect to your camera’s network

Tap to capture a photo or record
a video during live view
Tip: Captured photos/videos are
saved to the internal memory of
your smartphone. Look for the
AlwaysSafe folder

Tap to stop or start live view

Camera name and
connection status

Once ready, the camera goes into Wi-Fi configuration mode and
talks you through the setup process. Listen carefully and follow the
voice prompts to complete the setup of the camera.

Tap for a landscape (fullscreen)
display of the live view

Tap to hear or mute the sound

Wait ~30s

4

Select and view multiple
camera streams simultaneously

to scan

•

USB Cable

Micro-USB Connector

Live View screen

If you have problems setting up the camera with the app, try turning off
“Mobile Data” or “Cellular Data” on your smartphone first. This will prevent
your smartphone from automatically switching to cellular data for internet
connection once it detects the SWANN_xxx network has no internet access.

•

“AlwaysSafe”

2

Quick start: AlwaysSafe App

Tips & tricks

Check or change the
current Wi-Fi connection
Tip: Setting up the camera
using Ethernet? Once the
camera is detected, tap this
to configure Wi-Fi settings

Quickly start live view of the
last watched camera

Tap to share camera, edit
camera name & login
password, or delete camera.
Tip: Deleting the camera
does not remove the camera
from your Wi-Fi network. If
your smartphone is on the
same network, the app will
automatically detect and add the
camera again
Manage camera settings and
features such as date & time,
camera password, motion
detection sensitivity, email
notifications, and more
Tip: For the Email Alerts feature
to work properly, you may need
to review your email account
settings (e.g., Gmail) and give
permission for the app to use
your email account so it can
send out alerts

Access app settings and view
general information
Tip: Want to learn more about
using the AlwaysSafe app?
Download the AlwaysSafe App
Guide from our Support Center
at: support.swann.com



Navigation menu