Kohler KOHLER018 VEIL INTELLIGENT TOILET User Manual No Job Name

Kohler Co. VEIL INTELLIGENT TOILET No Job Name

User Manual

JOBNAME: No Job Name PAGE: 1 SESS: 17 OUTPUT: Wed Apr 6 16:10:51 2016Homeowners GuideWall Hung ToiletMproduct numbers are for Mexico (i.e. K-12345M)Los números de productos seguidos de Mcorresponden a México(Ej. K-12345M)Français, page “Français-1”Español, página “Español-1”K-54021247364-5-A
JOBNAME: No Job Name PAGE: 2 SESS: 17 OUTPUT: Wed Apr 6 16:10:51 2016Important InformationREAD AND FOLLOW ALL INSTRUCTIONSImportant SafeguardsWARNING: To reduce the risk of burns, electrocution, fire, or injury to persons:DANGER: Risk of electric shock. Connect only to a circuit protected by a Ground-FaultCircuit-Interrupter (GFCI)*.WARNING: Risk of electric shock. Do not immerse or flush the product with water.WARNING: Risk of personal injury. UV light emitted from this light can cause injury to skin oreyes. Avoid exposure to unshielded lamp.WARNING: Risk of personal injury. Replacement of the UV lamp must only be performed byqualified service personnel.CAUTION: Risk of personal injury. Do not remove the UV lamp protective cover. Eye damagemay result from viewing the UV light directly.For Service Personnel:WARNING: Risk of personal injury. This cover has an interlock designed to reduce the risk ofexcessive ultraviolet radiation. Do not bypass the interlock. Reinstall the interlock after servicing.IMPORTANT! The remote control must be paired for proper functionality.*Outside North America, this device may be known as a Residual Current Device (RCD).IMPORTANT! When using electrical products, especially when children are present, basic safetyprecautions should always be followed, including the following:Close supervision is necessary when this product is used by, on, or near children or invalids.Use this product only for its intended use as described in this manual. Do not use attachments notrecommended by the manufacturer.Never operate this product if it has a damaged cord or plug, if it is not working properly, if it hasbeen dropped or damaged, or dropped into water. Return the product to a service center forexamination and repair.Keep the cord away from heated surfaces.Never block the air openings of the product. Keep the air openings free of lint, hair, and otherdebris.Never use while sleeping or drowsy.Never drop or insert any object into any opening or hose.Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen isbeing administered.Connect this product to a properly grounded outlet only.SAVE THESE INSTRUCTIONS1247364-5-A 2 Kohler Co.WARNING:Exposure to Radio Frequency Energy: The radiated power output of the radar module is below the RF exposure limits for uncontrolled exposure. This device should be operated with a minimum distance of at least 20 cm between the antenna and a person’s body.Attention: évaluation d'exposition aux RF: L’intensité de champ RF émis par la carte radar est inferieures aux limites d'intensité de champ RF prévues pour l’environnement non contrôlé. Les dispositifs à un élément rayonnant fonctionnant normalement à des distances de séparation entre l'utilisateur et le dispositif supérieures à 20 cm.
JOBNAME: No Job Name PAGE: 3 SESS: 17 OUTPUT: Wed Apr 6 16:10:51 2016Features - ToiletNOTE: Many of the features listed here can be adjusted, enabled or disabled using the remote control.Specific directions for these procedures are listed later in this manual.General FeaturesAutomatic Flushing - When enabled, this feature automatically flushes the toilet after the userstands up, lowers the seat, or leaves the area 60 seconds after use. The toilet arrives with this featureenabled.Automatic Open/Close - When enabled, the seat cover will automatically open when the toilet isapproached. The seat and seat cover will automatically close 3 minutes after the toilet is used. Thetoilet arrives with this feature enabled.Energy Saving Mode - The toilet can be programmed to conserve energy. When the energy savingfunction is on, the toilet will reduce the heating temperature to save electricity.Deodorizer - The deodorizer eliminates or reduces unpleasant odors when enabled. It will beginoperation when the user sits down. The toilet arrives with this feature enabled.Side Controls - Allows the user to control basic toilet features without the remote control.Heated Seat - When activated, the seat features an adjustable heating option that will keep the seatwarm. The toilet arrives with this feature enabled.Night Light - The night light will automatically turn on in low light conditions when this feature isenabled. The toilet arrives with this feature enabled.Bidet FeaturesFront/Rear Wash - Front and rear wash feature adjustable positioning, adjustable water temperature,adjustable water pressure, and massage and spiral water action.Seat SensorArearear dryerfront flush lightingstopSeat SensorAreaBidet WandManual ControlsKohler Co. 3 1247364-5-A
JOBNAME: No Job Name PAGE: 4 SESS: 17 OUTPUT: Wed Apr 6 16:10:51 2016Features - Toilet (cont.)Dryer - The dryer features adjustable air temperature.UV Sterilization - The sterilization feature uses ultra violet rays and sterilized water to clean thebidet wand when enabled. It will begin operation only when the seat is closed.1247364-5-A 4 Kohler Co.
JOBNAME: No Job Name PAGE: 5 SESS: 17 OUTPUT: Wed Apr 6 16:10:51 2016Features - Remote ControlTop of Remote ControlOn/Off - Press to turn the remote control on or off.Front of Remote ControlSeat Cover Open/Close - Press to open or close the cover.Seat Open/Close - Press to open the cover and seat when both are closed, or the seat only when thecover is already open.Eco Flush - Press to flush the toilet with .8 gpf (3 lpf).Full Flush - Press to flush the toilet with 1.28 gpf (4.85 lpf).Seat Temperature - Press to adjust the seat temperature. Press the icon again to increase or decreasethe seat temperature.Stop - Press to stop the bidet wash, dryer, deodorizer and UV cleaner. Press and hold to turn theremote control off.Front - Press to activate the front bidet wash.Rear - Press to activate the rear bidet wash.Dryer - Press to activate the dryer. Press the icon again to increase or decrease the dryer.Clean - When the seat is closed, press to activate the UV sterilization. The feature is activated whenthe icon is blinking.Water Temperature - Press to adjust the water temperature when the bidet features are in use. Pressthe icon again to increase or decrease the water temperature.Wand PositionSpiralEco FlushFull FlushSeat TemperatureWater Pressure"Clean"Seat Cover Open / Seat CloseSeat and Seat Cover Open/CloseMassage"Stop""Front" BidetWash"Rear" BidetWash"Dryer"Bidet WaterTemperatureOn/OffSeat temp Flush-fullFlush-ecoSeatClean Dryer RearFrontPressureSpiralMassageStop Cover UVWater temp WandKohler Co. 5 1247364-5-A
JOBNAME: No Job Name PAGE: 6 SESS: 17 OUTPUT: Wed Apr 6 16:10:51 2016Features - Remote Control (cont.)Massage - Press to activate massaging action from the bidet wand. Water pressure will vary whilethe massage action is activated.Spiral - Press to activate or deactivate spiraling action on the bidet wand. This function operates inthe rear wash mode only.Wand Position - Select this icon to adjust the position of the wand. Press the icon again to increaseor decrease the wand position.Wand Pressure - Select this icon to adjust the pressure of the water. Press the icon again to increaseor decrease the wand pressure.1247364-5-A 6 Kohler Co.
JOBNAME: No Job Name PAGE: 7 SESS: 17 OUTPUT: Wed Apr 6 16:10:51 2016Features - Back PanelRemote PairingPress the ″On/Off″icon.Press and hold the ″Dryer″icon. The bottom row of icons will flicker.While holding down the ″Dryer″icon, Press the manual ″Front″and ″Rear″icons on the toilet.Once the bottom row of icons stops flickering, the remote is paired.Seat Auto Open/Close Sensing DistancePress the ″On/Off″icon.Press and hold the ″Cover″icon.The night light will blink once quickly when the sensing distance is set for short distance.The night light will blink twice quickly when the sensing distance is set for mid distance.The night light will blink three times quickly when the sensing distance is set for long distance.The night light will blink slowly when the auto seat open/close function is deactivated.Auto-flushPress the ″On/Off″icon.Press and hold the ″Flush-full″icon.The night light will blink once quickly when the automatic flushing function is activated.The night light will blink slowly when the automatic flushing function is deactivated.Energy SavingWand PositionSpiralEco FlushFull FlushSeat TemperatureWater Pressure"Clean"Seat Cover Open / Seat CloseSeat and Seat Cover Open/CloseMassage"Stop""Front" BidetWash"Rear" BidetWash"Dryer"Bidet WaterTemperatureOn/OffSeat temp Flush-fullFlush-ecoSeatClean Dryer RearFrontPressureSpiralMassageStop Cover UVWater temp WandKohler Co. 7 1247364-5-A
JOBNAME: No Job Name PAGE: 8 SESS: 17 OUTPUT: Wed Apr 6 16:10:51 2016Features - Back Panel (cont.)Press the ″On/Off″icon.Press and hold the ″Seat Temp″icon.The night light will blink once quickly when the energy saving function is activated.The night light will blink slowly when the energy saving function is deactivated.DeodorizerPress and hold the ″Seat ″icon for 2 seconds to enable or disable the deodorizer.The night light will blink once quickly when the deodorizer function is activated.The night light will blink slowly when the deodorizer function is deactivated.Auto UV SterilizationPress the ″On/Off″icon.Press and hold the ″Clean″icon.The night light will blink once quickly when the automatic sterilization function is activated.The night light will blink slowly when the automatic sterilization function is deactivated.Low Battery Remote ControlWhen the ″Stop″icon is blinking, the remote has low battery.Put the remote back onto the base to charge the battery.When the red light on the charging base is blinking the batteries need to be replaced.Low Battery Charging BaseWhen the red light is blinking, the charging base has a low battery.Remove the charging base from the wall.Open the back cover and replace the batteries.1247364-5-A 8 Kohler Co.
JOBNAME: No Job Name PAGE: 9 SESS: 17 OUTPUT: Wed Apr 6 16:10:51 2016Manual OperationThe basic functions of the toilet can be controlled manually using the buttons located on the right side oftoilet.NOTE: When the manual bidet features are activated using the side buttons, they will default to themiddle temperature, pressure, and position settings.″Rear″-Press the ″Rear″icon to activate the rear wash. Press it a second time to stop the rear wash.″Dryer″-Press the ″Dryer″icon to activate the dryer. Press it a second time to stop the dryer.″Power″-Press the ″Power″icon to turn the power on. Press it a second time to turn the power off.Light Level Sensor - Senses low light levels. If it is activated, the night light will turn on when lowlight levels are sensed.″Front″-Press the ″Front″icon to activate the front wash. Press it a second time to stop the frontwash.″Flush″-Press the ″Flush″icon to flush the toilet.″Lighting″-Press the ″Lighting″icon to turn the night light off. Press it a second time to turn onthe night light.flush lightingfrontstopdryerrearLight Sensing AreaRear Wash Dryer PowerNight Light Flush Front WashKohler Co. 9 1247364-5-A
JOBNAME: No Job Name PAGE: 10 SESS: 17 OUTPUT: Wed Apr 6 16:10:51 2016Using the Bidet Wash FunctionsNOTE: The bidet function will automatically stop after 5 minutes.Using the Front Bidet WashPress the ″Front″icon.Press the ″Stop″icon to end.Using the Rear Bidet WashPress the ″Rear″icon.Press the ″Stop″icon to end.Adjusting the Water TemperatureNOTE: Adjust the water temperature while the rear or front wash are in use.Press the ″Water Temp″icon.Press the icon as needed to increase or decrease the water temperature.There are five settings available. The blue points to the left of the icon indicate the setting the watertemperature is on.Adjusting the Water PressureNOTE: Adjust the water pressure while the rear or front wash are in use.Press the ″Pressure″icon.Press the icon as needed to increase or decrease the water pressure.There are five settings available. The blue points to the left of the icon indicate the setting the waterpressure is on.Adjusting the Wand PositionNOTE: Adjust the wand position while the rear or front wash are in use.Press the ″Wand″icon.Press the icon as needed to increase or decrease the wand position.There are five settings available. The blue points to the left of the icon indicate the setting the wandposition is in.Massage and SpiralWand PositionSpiralWater PressureMassage"Front" BidetWash"Rear" BidetWashBidet WaterTemperatureSeat temp Flush-fullFlush-ecoSeatClean Dryer RearFrontPressureandWSpiralMassageater tempWStop Cover UV1247364-5-A 10 Kohler Co.
JOBNAME: No Job Name PAGE: 11 SESS: 17 OUTPUT: Wed Apr 6 16:10:51 2016Using the Bidet Wash Functions (cont.)NOTE: Adjust the wand action to massage or spiral while the rear or front wash are in use.Select the ″Massage″or ″Spiral″icons.Press the ″Massage″icon to choose between an oscillating action, pulsating action or both. The bluepoints to the left of the icon indicate the setting the massage action is in.Kohler Co. 11 1247364-5-A
JOBNAME: No Job Name PAGE: 12 SESS: 17 OUTPUT: Wed Apr 6 16:10:51 2016Settings - User ProfilesUsing the DryerPress the ″Dryer″icon.Press the icon as needed to increase or decrease the dryer .There are five settings available. The blue points to the left of the icon indicate the setting the dryeris on.Using the DeodorizerPress and hold the ″Seat″icon.The night light will blink once quickly when the deodorizer is activated.The night light will blink once slowly when the deodorizer turns off.Setting the Seat TemperaturePress the ″Seat Temp″icon.Press the icon as needed to increase or decrease the seat temperature.There are five settings available. The blue points to the left of the icon indicate the setting the seattemperature is on.Seat Seat Temperature"Dryer"Seat temp Flush-fullFlush-ecoSeatClean Dryer RearFrontPressureandWSpiralMassageater tempWStop Cover UV1247364-5-A 12 Kohler Co.
JOBNAME: No Job Name PAGE: 13 SESS: 17 OUTPUT: Wed Apr 6 16:10:51 2016Using the Manual Clean SettingsCleaning the Bidet WandNOTE: Use a soft bristle brush to clean the bidet wand.On the remote control, hold down the ″Wand″icon until the wand extends out.Clean the wand with a wet soft bristle brush and appropriate cleaner.Press and hold down the ″Wand″icon again or the ″Stop″icon to retract the wand.Cleaning or Replacing the DeodorizerUnplug the power cord from the outlet.Turn off the water by closing the water supply stop.Remove the filter cover.Remove the filter and inspect it for damage.If the filter is damaged, replace it.If the filter is clogged, remove all debris.Install the filter.Install the cover.Open the supply stop.Plug the power cord into the outlet.Kohler Co. 13 1247364-5-A
JOBNAME: No Job Name PAGE: 14 SESS: 17 OUTPUT: Wed Apr 6 16:10:51 2016Servicing the ToiletUnplug the power cord from the outlet.Turn off the water by closing the water supply stop.Remove the left side cover.Remove the filter covers.Remove the filters and inspect them for damage.If the filters are damaged, replace them.If the filters are clogged, remove all debris.Install the filters.Install the covers.Reattach the left side cover.Open the supply stop.Plug the power cord into the outlet.Care and CleaningWARNING: Risk of property or product damage. Do not use in-tank cleaners in your toilet.Products containing chlorine (calcium hypochlorite) can seriously damage fittings in the tank. Thisdamage can cause leakage and property damage.Kohler Co. shall not be responsible or liable for any tank fitting damage caused by the use of cleanerscontaining chlorine (calcium hypochlorite).FilterFilter1247364-5-A 14 Kohler Co.
JOBNAME: No Job Name PAGE: 15 SESS: 17 OUTPUT: Wed Apr 6 16:10:51 2016Care and Cleaning (cont.)For best results, keep the following in mind when caring for your KOHLER product:•Always test your cleaning solution on an inconspicuous area before applying to the entire surface.•Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse anddry any overspray that lands on nearby surfaces.•Do not allow cleaners to soak on surfaces.•Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouringpad to clean surfaces.•For Artist Edition Toilets: Treat your decorative product just as you would treat your fine china.DO NOT use bristle brushes or abrasive-backed sponges. They will scratch decorative surfaces. Useonly warm water to clean. Dry with a cotton cloth or soft sponge.For detailed cleaning information and products to consider, visit www.kohler.com/clean. To order Care &Cleaning information, call 1-800-456-4537.Troubleshooting InformationNOTE: For service parts information, visit your product page at www.kohler.com/serviceparts.Small ChildrenThe auto flush and bidet features require a sensor located under the seat to be enabled. Smallchildren may not be tall enough (approximately 48″(1.2 m)) to activate the sensor. The bidet andautoflush features will not function correctly when this sensor has not been activated.GeneralSymptoms Probable Causes Recommended Action1. The toilet has no power. A. The power is not turned on. A. Press the ″Power″icon on themanual control panel.B. The power cord is notconnected.B. Connect the power cord.C. The GFCI or RCD is tripped. C. Reset the GFCI or RCD (ifapplicable).2. The toilet does not flushbut has power.A. There is no water beingsupplied to the toilet.A. Open the water supply stop all theway.B. The water control assemblydoes not work.B. Replace the water control assembly.3. No water comes from thebidet wand or it has aweak stream when it isactivated.A. The water supply stop is closedor only partially open.A. Open the water supply stop all theway.B. The inlet hose from the watersupply stop to the toilet iskinked or looped too tight.B. Remove the kink in the hose ormake the loop wider.C. Seat sensor does not detect theuser.C. Small children may not bedetected. Adjust the sittingposition. The sensor may havedifficulty with fabric or otherobjects. The sensor is designed tosense skin.D. The water supply screen isblocked or damaged.D. Service the filter following theinstructions in the Servicing theToilet Filter section.4. The heated seat is notwarm at all or it is not aswarm as desired.A. The heated seat feature is notenabled.A. Activate the heated seat featureusing the remote control.B. The temperature setting is toolow.B. Adjust the heated seat temperatureusing the remote control.Kohler Co. 15 1247364-5-A
JOBNAME: No Job Name PAGE: 16 SESS: 17 OUTPUT: Wed Apr 6 16:10:51 2016Troubleshooting Information (cont.)Symptoms Probable Causes Recommended Action5. Water stops flowing fromthe spray wand beforeyou are finishedcleansing.A. Five minutes after pressing oneof the spray icons, washingautomatically stops.A. Press the ″Rear″or ″Front″iconagain.6. Deodorizer feature is notworking.A. The deodorizer is not activated. A. Activate the deodorizer featureusing the remote control.7. UV sterilization feature isnot working.A. The UV sterilization is notactivated.A. Activate the UV sterilizationfeature using the remote control.8. The toilet does not flushautomatically.A. Automatic flush feature is notenabled.A1. Activate the automatic flush featureusing the remote control.A2. The sensor did not detect the user.If this issue occurs repeatedly, callthe Customer Care Center usingthe information provided on theback page of this manual.9. The night light does notturn on in low lightconditions.A. Night light is not enabled. A. Enable the night light feature usingthe remote control.B. Low light sensor is not workingproperly.B1. Clean the light sensor located onthe manual control panel.B2. Call the Customer Care Centerusing the information provided onthe back page of this manual.Remote ControlSymptoms Probable Causes Recommended Action1. The remote control is notturning on.A. The batteries are not correctlyinstalled.A. Remove and reinstall the batteries.B. The batteries are drained. B1. Replace the batteries.B2. Call the Customer Care Centerusing the information provided onthe back page of this manual.2. The remote control is notconnecting with the toilet.A. The remote is too far from thetoilet to receive signal.A. Move the remote closer to the toiletto regain connection.Remote Control ComplianceFCC ID: N82-KOHLER015, N82-KOHLER018IFT: Certification Number RCPKO1215-2233 and RCPKO1215-2234.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may cause undesiredoperation.Changes or modifications not expressly approved by the party responsible for compliance could void theuser’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference will not occur in a1247364-5-A 16 Kohler Co.
JOBNAME: No Job Name PAGE: 17 SESS: 17 OUTPUT: Wed Apr 6 16:10:51 2016Remote Control Compliance (cont.)particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.•Consult the dealer or an experienced radio/TV technician for help.Modifications: any modifications made to this device that are not approved by Kohler Co. may void theauthority granted to the user by the FCC to operate this equipment.RF Exposure WarningThis portable transmitter with its antenna complies with FCC’s RF exposure limits for generalpopulation/uncontrolled exposure.This device must not be co-located or operated in conjunction with any other antenna or transmitter.CANADA IC: 4554A-KOHLER015, 4554A-KOHLER018This device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions:1. This device may not cause interference, and2. This device must accept any interference, including interference that may cause undesired operation of thedevice.This portable transmitter with its antenna complies with Industry Canada RF Exposure Limits for GeneralPopulation/Uncontrolled Exposure.This Class B digital apparatus complies with Canadian ICES-003.WarrantyTHREE YEAR LIMITED WARRANTY FOR VITREOUS CHINA COMPONENTTHREE YEAR LIMITED WARRANTY FOR MECHANICAL PARTSKohler Co. warrants the vitreous china component on the KOHLER Numi toilet to be free of defects inmaterial and workmanship during normal residential use for three (3) years from the date of installation.Kohler Co. will further warrant all mechanical parts in the KOHLER Numi toilet to be free of defects inmaterial and workmanship during normal residential use for three (3) years from the date of installation.This warranty only applies to the KOHLER Numi toilet when installed in the United States of America andCanada.If a defect is found in normal use, Kohler Co. will, at its election, repair, replace or make appropriateadjustment where Kohler Co. inspection discloses any such defects. Damage caused by accident, misuse orabuse is not covered by this warranty. This warranty expressly excludes labor charges, removal charges,installation, or other incidental or consequential costs. Improper care and cleaning will void the warranty.Use of in-tank toilet cleaners will void the warranty. In no event shall the liability of Kohler Co. exceed thepurchase price of the product.Kohler Co. 17 1247364-5-ALe présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts delicence.Le fonctionnement de l’appareil est soumis aux deux conditions suivantes:1. L’appareil ne doit pas produire de brouillage, et2. Cet appareil doit tolérer les interférences reçues, y compris celles qui risquent de provoquer unfonctionnement indésirable.Cet émetteur portable et son antenne sont conformes aux limites d’exposition RF d’Industrie Canada pour lepublic général/l’exposition non contrôlée.
JOBNAME: No Job Name PAGE: 18 SESS: 17 OUTPUT: Wed Apr 6 16:10:51 2016Warranty (cont.)KOHLER CO. AND/OR SELLER ARE PROVIDING THESE WARRANTIES IN LIEU OF ALL OTHERWARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIEDWARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. KOHLER CO.AND/OR SELLER DISCLAIM ANY LIABILITY FOR SPECIAL, INCIDENTAL OR CONSEQUENTIALDAMAGES. Some states/provinces do not allow limitations on how long an implied warranty lasts, or theexclusion or limitation of special, incidental or consequential damages, so these limitations and exclusionsmay not apply to you. This warranty gives you specific legal rights. You may also have other rights whichvary from state/province to state/province.This is Kohler Co.’s exclusive written warranty.1247364-5-A 18 Kohler Co.If you believe that you have a warranty claim, contact your Dealer, Plumbing Contractor, Home Center orE-tailer, or by writing Kohler Co., Attn: Customer Care Center, 444 Highland Drive, Kohler, WI 53044, USA.Please be sure to provide all pertinent information regarding your claim, including a complete description ofthe problem, the product, model number, color, the date the product was purchased and from whom theproduct was purchased. Also include your original receipts. For other information or to obtain the name andaddress of the service and repair facility nearest you, call 1-800-4KOHLER (1-800-456-4537) from within theUSA and Canada and 001-800-456-4537 from within Mexico.
JOBNAME: No Job Name PAGE: 1 SESS: 1 OUTPUT: Wed Apr 6 16:10:51 20161247364-5-A
JOBNAME: No Job Name PAGE: 1 SESS: 1 OUTPUT: Wed Apr 6 16:10:51 2016USA/Canada: 1-800-4KOHLERMéxico: 001-800-456-4537kohler.com©2016 Kohler Co.1247364-5-A

Navigation menu