Konica Minolta Dimage Z1 Instruction Manual 2724_PictBridge_Insertion

Z1 to the manual 82313e12-c0be-43b8-969b-c4560adf615f

: Konica-Minolta Konica-Minolta-Dimage-Z1-Instruction-Manual-124518 konica-minolta-dimage-z1-instruction-manual-124518 konica-minolta pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

Konica Minolta is a trademark of Konica Minolta Holdings, Inc. DiMAGE is a trademark
or registered trademark of Konica Minolta Camera, Inc. USB DIRECT-PRINT is a
trademark of Seiko Epson Corporation. PictBridge and the PictBridge logo are
trademarks of the Camera & Imaging Products Association (CIPA). All other brand and
product names are trademarks or registered trademarks of their respective owners.

AMENDMENTS
HOW TO

E

USE

INSTRUCTION MANUAL

BEFORE YOU BEGIN
Please take the time to read through this instruction manual so you can
enjoy all the features of your new camera. This instruction manual does not
provide instruction in printer operation. Refer to the manual that was
supplied with the printer. This manual assumes you understand the basic
operation of the camera described the camera’s instruction manual.

ACTIVATING PictBridge
Video output

If PictBridge is not active in the camera,
section 4 of the setup menu will display only
one menu option: video output.

NTSC

With the section 4 tab highlighted, press the
hold the central button of the controller (1),
and then press and hold the information (i+)
button (2) until the transfer-mode option
appears.

1
2

SETUP MENU AMENDMENTS
Video output
Transfer mode

NTSC
Data storage

When PictBridge is active, the transfer-mode
option is displayed in section 4 of the setup
menu. This amends page 85 in the DiMAGE
Z1 instruction manual. Two transfer modes
are available:
Data storage - to transfer data between the
camera and computer. This option must be
selected when moving image files to the
computer, using the camera with the DiMAGE
Viewer software, or printing with USB
DIRECT PRINT.
PictBridge - to print images with a PictBridge
compatible printer.

USB DIRECT-PRINT AND DPOF PRINT NOTES
To use USB DIRECT-PRINT, the transfer-mode option in section 4 of the
setup menu must be set to data storage. To make prints, read the
instructions on pages 102 - 104 of the camera manual.
DPOF file created with the camera can be printed directly from the camera
with a DPOF compatible printer. See page 105 in the camera manual. The
DPOF-print option on the menu is switched from section 2 to section 3.

© 2003 Konica Minolta Camera, Inc. under the Berne Convention
and the Universal Copyright Convention.
Printed in Japan

1AG6P1P1853-9222-2724-23 SY-A309

Print file?
Number of prints: 7
No
Yes
No. of prints:
Print size:
Layout:
Print quality:
Data print:
:start

7
Printer setup
Printer setup
Printer setup
Printer setup

When using USB DIRECT-PRINT or DPOF
print, the print-file message described in the
camera manual has been replaced with the
print-setup confirmation screen. Press the
central button of the controller to begin
printing, or press the menu button to return to
the main screen.

Print-setup confirmation screen

CONNECTING TO A PRINTER
Batch print
Index print

Confirm the transfer-mode option in section 4
of the setup menu is set to PictBridge.
Connect the camera to a PictBridge
compatible printer using the camera’s USB
cable. The larger plug on the cable is
connected to the printer. Open the card
chamber door and insert the smaller plug of
the cable into the camera. Turn the camera
on; the PictBridge screen is displayed
automatically.

–
–

The options that can be changed vary with
the printer.

Batch print

SELECTING PRINT IMAGES

Batch print in section 1 selects all still images on the memory card for
printing. When the all-frames option is selected, a screen opens so the
number of copies of each image can be specified. The reset option cancels
all changes made to the print selection screen.

Individual still images can be selected for printing on the PictBridge screen.
For other printing options, see the menu navigation section.

Index print

Number of prints in the print run.
Strike
through
indicates
unprintable file type.

An index print of all still images on the memory card can be made. The
quality and size of the print can be specified with the camera menu. The
number of images per page varies with the printer. The print-setup
confirmation screen is displayed before the print routine starts.

Number of copies of the displayed image.
Use the left/right keys of
the controller to display
the image to be printed.

:move

:sel.

Press the up key to select
the number of copies to
be printed. To deselect an
image for printing, press
the down key until the
number of copies reaches
zero.

:print

Repeat the previous steps until all the images to be printed are
selected. Press the central button of the controller to continue.

No. of prints:
Print size:
Layout:
Print quality:
Data print:
:start

7
Printer setup
Printer setup
Printer setup
Printer setup

Printing finished.
OK

The number of prints in the print run are
displayed as well as the print parameters
selected with the menu. See the menu
navigation section for more information. Press
the central button of the controller to begin
printing, or press the menu button to return to
the PictBridge screen.
Once printing begins, the operation can be
canceled by pressing the center of the controller.
The printing-finished message indicates the end of
the operation; turn the camera off to end the
routine.

The information (i+) button switches between the single frame and index
playback formats on the PictBridge screen. Enlarged playback, activated
with the zoom lever, can be used to examine image files on the screen.

NAVIGATING THE PictBridge MENU

Paper size
Sizes
Layout
Print quality
Data print

Printer setup
N. American
Printer setup
Printer setup
Printer setup

Paper size
The paper size of the print can be specified. The printer-setup option uses
the size set with the printer. The sizes option should be set first, see below.

Sizes
To set paper sizes depending on region. This changes the paper-size
option to common sizes used in particular areas.

Layout
The layout of the print can be set. The printer-setup option uses the layout
parameters of the printer. Borderless printing can be specified with the
camera as well as the number of images per page.

Print quality
The print quality can be set. The printer-setup option uses the quality set
with the printer. The fine quality can be specified with the camera.

Data print
Data can be printed with the image. The printer-setup option uses the
options set with the printer. The date of capture and the file name can be
selected for printing. Data printing can also be disabled with the menu.

DPOF print

–

Pressing the menu button (1) turns the menu on and off. The four-way keys
of the controller (2) move the cursor in the menu. Pressing the central
button of the controller enters a setting.
Activate the menu with the menu button.
Use the left/right keys of the controller to highlight the
appropriate menu tab; the menu changes as the tabs are
highlighted.
Use the up/down keys to scroll through the menu options.
Highlight the option whose setting needs to be changed.
With the menu option highlighted, press the right controller key;
the settings are displayed with the current setting highlighted. If
“Start” is displayed, press the center of the controller to continue.

DPOF print in section 3 allows still images and an index print selected with
the DPOF printing options in section 2 of the playback menu to be printed
from a DPOF compatible PictBridge or Epson USB DIRECT-PRINT printer.
Simply select the start option from the menu to begin the routine, see page
105 in the camera manual for more information. The transfer-mode option
in section 4 of the setup menu must be set to data storage to use DPOF
print.

Printing Notes
The following are the dimensions for postcard, L, and 2L paper sizes
in both millimeters and inches for your reference:
Postcard
L
2L

Use the up/down keys to highlight the new setting.

Press the central button of the
controller to select the highlighted
setting.
Once a setting has been selected, the cursor
will return to the menu options and the new
setting will be displayed. To return to the
PictBridge screen, press the menu button.
Read the following sections on information on
the menu options.

DPOF print

100 X 148mm
89 X 127mm
127 X 178mm

3.9 X 5.9 in.
3.5 X 5.0 in.
5.0 X 7.0 in.

NOTES ON PRINTING ERRORS
2
1

If a minor problem occurs during printing, such as the paper runs out, follow
the procedure recommended for the printer; no action is required for the
camera. If a major printer error occurs, press the center of the controller to
end the routine. Refer to the printer manual for the correct procedure for the
printer problem. Check the printer settings before starting again and
deselect the images that were printed.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2003:09:03 12:50:01
Producer                        : Acrobat Distiller 4.05 for Macintosh
Author                          : Will_Ash
Creator                         : QuarkXPressª: LaserWriter 8 J1-8.4.3
Title                           : 2724_PictBridge_Insertion.qxd
Modify Date                     : 2003:09:03 12:50:03+08:00
Page Count                      : 2

EXIF Metadata provided by EXIF.tools