Kpnetworks ISH-1101-003 Gateway Board User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2957445
Application ID	IEaHtp9w+2TRixLJyAq8IA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.27kB (253322 bits)
Date Submitted	2016-04-13 00:00:00
Date Available	2016-10-10 00:00:00
Creation Date	2016-03-29 17:33:55
Producing Software	itext-paulo-155 (itextpdf.sf.net-lowagie.com)
Document Lastmod	2016-03-29 17:33:55
Document Title	User Manual
Document Creator	pdftk 1.41 - www.pdftk.com

ISH-1101-003
NZ-BOX Gateway circuit Board
Instruction Manual
Rev 1.0
2016/3/1
Kpnetworks Ltd.
-1-
A2A-15043-00
Revision History
Description
Date
Rev 1.0
First Edition
December 15, 2015
Rev 1.1
Added Warnings.
March 1, 2016
-2-
A2A-15043-00
Table of Contents
WARNINGS .................................................................................................................................. 4
CAUTION .................................................................................................................................... 4
KEY TO SYMBOLS ....................................................................................................................... 5
NOTE .......................................................................................................................................... 5
OVERVIEW OF THE NZ-BOX GATEWAY CIRCUIT BOARD ............................................... 7
THE FRONT BOARD .................................................................................................................... 7
THE BACK BOARD ...................................................................................................................... 8
HOW TO USE THE NZ-BOX GATEWAY CIRCUIT BOARD ............................................................... 9
INSTALLATION ............................................................................................................................ 9
POWER ON/OFF ...................................................................................................................... 10
RESET THE NZ-BOX GATEWAY CIRCUIT BOARD ....................................................................... 10
STATUS OF THE NZ-BOX GATEWAY CIRCUIT BOARD ................................................................. 11
CAUTION FOR THE OPERATION................................................................................................. 12
REGULATORY INFORMATION TO HOST MANUFACTURER ........................................................... 13
-3-
A2A-15043-00
Safety Warnings
Warnings

Connect the earth wire to the outlet before turning on the power, to prevent
an electric shock.
Place the power code in the outlet which is connected to
the earth wire.

Do not use the NZ-Box Gateway circuit Board in an environment that
consists of excessive humidity or flammable gas.

Changes or modifications not expressly approved by Kpnetworks Ltd.
responsible for compliance could void the user’s authority to operate the
equipment.

This equipment complies with radio frequency exposure limits set forth by
the FCC and Industry Canada for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20
cm between the device and the user or bystanders. This device must not be
co-located or operating in conjunction with any other antenna or
transmitter.

Cet équipement est conforme aux limites d'exposition aux radiofréquences
définies par la FCC et Industrie Canada pour un environnement non
contrôlé. Cet équipement doit être installé et utilisé avec un minimum de
20 cm de distance entre le dispositif et l'utilisateur ou des tiers. Ce
dispositif ne doit pas être utilisé à proximité d’une autre antenne ou d’un
autre émetteur.
Caution

The NZ-Box Gateway circuit Board is an electrostatic sensitive device.
Pay sufficient attention to static electricity during the operation.
-4-
A2A-15043-00
Key to Symbols
Warning ： Ensure that the operator fully understands the contents of the
statements with this sign.
The warning statements indicate a
possibility of injury if operational procedures are not followed
correctly.
Caution ：
Ensure that the operator fully understands the contents of the
statements with this sign.
The caution statements indicate a
possibility of damage to the NZ-Box Gateway circuit Board or its
peripheral equipment if operational procedures are not followed
correctly.
Note
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
-5-
A2A-15043-00
This device complies with Industry Canada’s licence-exempt RSSs. Operation
is subject to the following two conditions:
(1) this device may not cause interference; and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage;
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi,
même
si
le
brouillage
est
susceptible
d'en
compromettre
le
fonctionnement.
Innovation,
Science
and
Economic
Development
Canada
ICES-003
Compliance Label Information: CAN ICES-3 (B) / NMB-3(B)
-6-
A2A-15043-00
Overview of the NZ-Box Gateway circuit Board
The Front Board
3G Antenna Connector
U.FL Connector
SIMM CARD
GPS Antenna Connector
U.FL Connector
mini-SIM (2FF)
USB
Ethernet
USB2.0
USB-A Connector
10/100/1000BASE
RJ-45 Connector
Reset Switvh
Power Connector
+5V±5%
B04B-XASK-1
RS-485#1
RS-485(isolation)
USB-A Connector
LED
From the Top
Active
(Green)
Deactivate (Green)
Error
(Red)
RS-485
(Green)
3G
(Green)
Wi-Fi/BT (Green)
SD CARD
Mounting Hole (4)
MicroSD
Wireless LAN/Bluetooth Antenna
Earth wire
Note : USB devices should be inserted to USB port directly.
Following interface can not be used.
Digital I/O , Analog Input , RS-485#2
-7-
A2A-15043-00
The Back Board
-8-
A2A-15043-00
How to Use the NZ-Box Gateway circuit Board
Installation
Use the specified cable for the power code.
The polarity must be correct.
the mounting holes, the earth wire must be connected.
To use
Connect the NZ-Box Gateway
circuit Board according to the following power requirements,
Output Voltage
Output Current
：
：
+5V
Over 1.5A
Warning：The earth wire must be properly grounded to prevent electric shock.
Caution：Before the operation, eliminate static electricity from the operator.
Warning：The following actions may cause fire or electric shock,
1. Damage the power cord
2. Processe the power code
3. Bend the power code
4. Pull the power code
5. Twist the power code
6. Bundle the power code.
Avoid placing heavy objects or heating the power code, as it damages
it and increase the risks of fire or electric shock.
-9-
A2A-15043-00
Power ON/OFF
The power is turned on by applying power-supply voltage of +5V±0.5%, through
the power supply connector.
Alternatively, the power is turned off by cutting the voltage
application in the power input connector.
Warning：To prevent the breakage of a substrate, do not apply voltage which is
not specified in this manual.
Reset The NZ-Box Gateway circuit Board
A reset switch is used to restart the device.
Press the reset switch once, the CPU
will reset and the device will restart.
- 10 -
A2A-15043-00
Status of the NZ-Box Gateway circuit Board
LED indicates the device status.
Active
Following are details of the status.
：The light turns on when the substrate is in operation.
Steady Green
：
Active
Lights-out
：
Deactivate
Deactivate ：The light turns on when the substrate is under suspension
Error
RS-485#1
3G
Steady Green
：
Deactivate
Lights-out
：
Active
：The light turns on if an error occurs.
Steady Red
：
Error
Lights-out
：
Normal
：The light turns on when the device is connected to the RS-485
Blinking Green ：
Connected to RS-485
Lights-out
Not connected to RS-485
：
：The light turns on when the device is connected to 3G network.
Blinking Green ：
Lights-out
Wi-Fi/BT
3G network is online
： 3G network is offline（link is disconnected）
：The light turns on when the device is connected to Wi-Fi or Bluetooth
Blinking Green ：
Connected to Wi-Fi or Bluetooth
Lights-out
Connected to neither Wi-Fi nor Bluetooth
：
- 11 -
A2A-15043-00
Caution for the Operation
If the NZ-Box Gateway circuit Board is damaged
If the device is damaged or dropped, turn the power off immediately by
disconnecting the power code and contact our support service.
If a damaged device is used
as is, fire or electric shock may occur.
If the NZ-Box Gateway circuit Board emits smoke
Do not use the device in an event of emission of smoke or abnormal smell.
It may
lead to fire or electric shock. When a problem occurs, turn the power off immediately by
disconnecting the power code, ensure the smoke stops and contact our support service.
Do
not try to repair the device by yourself for safety reasons.
Prohibit the use of unexpected specification
Do not use of unexpected specification, to prevent fire or an electric shock.
Do not disassemble and modify
Do not disassemble or modify the device, to prevent fire or electric shock
- 12 -
A2A-15043-00
Regulatory Information to host manufacturer
Since this radio product ISH-1101-003 is granted as Single Limited Modular Approval,
this radio product is for OEM integration only.
And this radio device cannot be sold to general public.
Therefore, we Kpnetworks Ltd. will ask OEM integrator to include the following
statements required by FCC and ISED on the host product and in its Installation manual.
1.
Label of host product
1)The host manufacturer must include the following three ID numbers at the label of the
host product.
" Contains FCC ID: 2AGR9ISH-1101-003"
" Contains IC: 20941-ISH1101003"
" Contains IC: 7830A-PHS8P"
ISED number 7830A-PHS8P is granted to Cinterion Wireless Modules GmbH.
2)Following sentence must be indicated on the product.
It may be located in the user
manual for small size products.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1)
this device may not cause harmful interference, and
(2)
this device must accept any interference received, including interference that may
cause undesired operation.
3) ICES-003 Compliance Label must be indicated on the product.
CAN ICES-3 (*)/NMB-3(*)
* Insert either “A” or “B” but not both to identify the applicable Class of ITE.
2.
User manual of host product
This manual must include all required regulatory information/warning as shown in this
manual.
1) Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
- 13 -
A2A-15043-00
2) Statement in accordance with FCC §15.105. Based on the class of the host product,
either one of two statements must be indicated.
For Class A equipment:
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
For Class B equipment:
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
3) This equipment complies with radio frequency exposure limits set forth by the FCC
and Industry Canada for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 cm
between the device and the user or bystanders.
This device must not be co-located or operating in conjunction with any other antenna or
transmitter.
- 14 -
A2A-15043-00
Cet équipement est conforme aux limites d'exposition aux radiofréquences définies par la
FCC et Industrie Canada pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre
le dispositif et l'utilisateur ou des tiers.
Ce dispositif ne doit pas être utilisé à proximité d’une autre antenne ou d’un autre
émetteur.
4) This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1)
this device may not cause interference; and
(2)
this device must accept any interference, including interference that may cause
undesired operation of the device.
Note: 2.4GHz Wireless LAN and Bluetooth transmitters are classified as licence-exempt
device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1)
l'appareil ne doit pas produire de brouillage;
(2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.
- 15 -
A2A-15043-00

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
Creator                         : pdftk 1.41 - www.pdftk.com
Producer                        : itext-paulo-155 (itextpdf.sf.net-lowagie.com)
Modify Date                     : 2016:03:29 17:33:55-09:00
Create Date                     : 2016:03:29 17:33:55-09:00
Page Count                      : 15

EXIF Metadata provided by EXIF.tools