Kramer Electronics KT-107 Touch panel communication module User Manual KT 107 KT 107RB

Download:
Mirror Download [FCC.gov]
Document ID	3441693
Application ID	BwpeFulKVD8pGEecfWommw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	48.7kB (608772 bits)
Date Submitted	2017-06-27 00:00:00
Date Available	2017-12-25 00:00:00
Creation Date	2017-06-22 15:37:55
Producing Software	Microsoft® Word 2010
Document Lastmod	2017-06-22 15:37:55
Document Title	KT-107/KT-107RB
Document Creator	Microsoft® Word 2010
Document Author:	Jeremy Karp;DPhilosoph@kramerel.com

KT-107/KT-107RB Quick Start Guide
This guide helps you install and use your KT-107/KT-107RB for the first time.
Scan for full manual
Go to www.kramerav.com/downloads/KT-107 to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check what’s in the box
KT-107/KT-107RB Touch Panel
Tabletop mount
On-wall mount unit
1 Quick start guide
AC/DC adapter
Installation screws
Panel mount plate
1 right-angle OTG USB cable
Step 2: Get to know your KT-107/KT-107RB
Feature
Function
Hidden Reset Button
Located on top-side. Insert a pin and hold for a few seconds to reset
KT-107/KT-107RB
Light Sensor
Automatically adjusts the screen brightness according to the room lighting conditions
Activity RGB LED
Lights green when powered, flashes green when charging the battery, lights red when
camera on
Camera
For remote room viewing or video conferencing
Microphone
For audio communication, recording or conferencing
Speakers
To output the sound
Control Button
Touch the Kramer logo area lightly to set the screen to sleep mode or turn it back on.
Press and hold (for 1 to 2 seconds) to open the pop-up menu which lets you power
down the unit, reboot it or return to the Home-page.
Press twice to activate the camera
Tabletop Mount Connector
For connecting to the tabletop mount
Cover
Covers the wall mount connections and power button
10
Power Button
Press to power on the KT-107/KT-107RB. When powered, press briefly to open the
pop-up menu and power down the device, reboot it or return to the Home-page.
Press and hold to power down the device immediately. This button is also used for
firmware upgrade
KT-107/KT-107RB Quick Start (P/N: 2900-300786QS REV 4)
P/N:
2 9 0 0 - 3 0 0 7 8 6 QS
Rev:
#
Feature
Function
11
Volume-up Button
Used for firmware upgrade. Press to increase KT-107/KT-107RB speaker volume
12
Micro USB Port
For connecting to an adjacent on-wall USB device and for firmware upgrade
13
Flat Cable Connector
For connecting to the on-wall mount unit
14
Connecting Holes
For connecting to the tabletop mount or the panel mount plate.
To prevent potential damage to the Touch Panel, use only Kramer supplied screws
and mounts
Step 3: Mounting the KT-107/KT-107RB
Mounting on a table using one of the following options:
Portable Mount: place the tabletop mount on the table. Connected cables remain visible and the table remains intact.
Secure Mount: secure the tabletop mount to the table as follows:
1. Measure the exact location on the surface of the table where you want to install the KT-107/KT-107RB.
2. Drill a hole in the table and optionally cut the cable pass-through opening according to the cut-out dimensions defined in
the user manual.
3. Secure the tabletop mount to the table using the M5x60 secure screw.
4. Connect the Ethernet port to a PoE-enabled source. Optionally, you can connect the power adapter too (as backup).
5. Replace the appropriate cover and place the KT-107/KT-107RB over the tabletop mount (the Touch Panel is magnetically
held in place), by first inserting the lower part of the Touch Panel then carefully laying the KT-107/KT-107RB in place..
6. Wait for the Home-page to load and then secure the KT-107/KT-107RB to the tabletop mount from the rear side (using 2
M2x4 screws, supplied with the unit).
7. Optionally, lock the tabletop mount with a Kensington locker (not supplied).
Mounting on the wall:
Before mounting KT-107/KT-107RB on a wall, install an in-wall junction box (recommended boxes are listed in the user manual)
1. Attach the on-wall mount unit to the installed junction box (top side up see indication arrows on unit).
Connect Ethernet and/or power cables and optionally, insert the right-angle USB cable (supplied) for connecting to an
adjacent external USB device.
2. Screw the 4 wall-mounting screws (supplied) through the screw openings.
The various screw openings fit various types of wall junction boxes.
3. On the rear side of the KT-107/KT-107RB, remove the screw cover and the cover and set aside.
4. Attach the panel mount plate to the rear side of the KT-107/KT-107RB (using 4 M2x4 screws, supplied).
5. Connect the flat cable from the on-wall mount
(attached to the in-wall junction box) to the connector
on the rear of KT-107/KT-107RB.
6. Hang the KT-107/KT-107RB on the wall by sliding the
tabs on the attached panel mount plate over the
grooves on the on-wall mount unit.
Step 4: Customizing the KT-107/KT-107RB settings
The Settings page is accessible from the Home-page and enables customizing the KT-107/KT-107RB settings:
To modify date and time settings:
1. In the Home-page, click Settings.
2. Scroll down to the System area and click
Date & time.
3. Enable Automatic date & time to derive the date
and time from the Network. When disabled, enter
the date and time manually.
4. Select the time format.
To modify display settings:
1. In the Home-page, click Settings.
2. Select Display.
3. Set the following (as required):

Brightness: brightness level, adaptive brightness

Enable camera activation shortcut: via control
button

Status Bar: Hide lower and/or top status bar

Auto Sleep: Sleep timeout.
To modify Control button settings:
1. In the Home-page, click Settings.
2. Select Control.
3. Select Control button (Kramer Logo touch).
4. Enable or disable the control button.
To modify password protection upon Home-page exit:
1. In the Home-page, click Settings.
2. Select Control.
3. Select Home-page password-protected exit.
4. Disable or enable.
For KT-107 model: FCC-ID-R8S-KT-107
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense.
Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation of the device is subject to the following conditions:

This device may not cause harmful interference

This device must accept any interference received, including interference that may cause undesired operation
Recommendations for safe exposure to non-ionizing radiation: Only use the device at least 20 centimeters away from your body.
Technical Specifications:
Tabletop Mount Ports:
1 1000/100/10BaseT Ethernet on RJ-45 connector; 1 micro USB 2.0
2-pin terminal block for DC power supply
On-wall Mount Ports:
1 1000/100/10BaseT Ethernet on RJ-45 connector
1 2-pin terminal block connector for DC power supply
Speakers:
2x1 W, 8 ohm
Microphone:
-42dB ±3dB @ 1kHz sensitivity
CPU Performance:
1.6GHz Quad Core, GPU, 2GB RAM, 16GB Flash
OS Software:
Android 6.0.1
Multi Touch:
10 points, 2-finger gesture
Display:
7” IPS, 1280x800 RGB pixels, 16:10 aspect ratio, ±80° horizontal/vertical viewing angles, 400cd/m2
brightness, 800:1 contrast ratio
Video Format:
Decoding: H.265/HEVC; H.264/AVC; MPEG-1/2/4; DivX 3/4/5/6; MVC; GOOGLE VP8; VC-1; H.263;
SORENSON SPARK; ON2 VP6; MOTION JPEG; Encoding:H.264/AVC
Ethernet Port:
10/100/1000Mbps PoE LAN
Wireless Communication:
Wi-Fi 802.11 b/g/n/ac, Bluetooth 4.0
For KT-107RB, Wi-Fi 802.11 ac, 5GHz frequency band range is restricted to up to 5.35GHz
Camera:
Front, 2M pixels, HD 720p
Battery:
Rechargeable, supports up to 3 hours of Wi-Fi operation
Controls:
Hidden reset button, power button, volume-up button
Touch panel status LED: flashes green during charging, green for fully charged, red for camera on
Power Inputs:
Power over Ethernet (complies with IEEE802.3af and IEEE802.3at PoE standards), power supply unit
Power Consumption:
5V DC, 3A
Operating Temperature:
0° to +40°C (32° to 104°F)
Storage Temperature:
-10° to +55°C (14° to 131°F)
Humidity:
10% to 90%, RHL non-condensing
Case Design:
Black body and cover
Dimensions:
Shipping dimensions:22.4cm x 13cm x 20.6cm (8.8" x 5.12" x 8.1"), W, D, H
Touch panel: 17.8cm x 1.3cm x 13cm (7" x 0.51" x 5.12"), W, D, H
Tabletop mount: 18.5cm x 10.7cm x 12.4cm (7.28" x 4.2" x 4.88"), W, D, H
Panel mount plate: 14.6cm x 3.7cm x 9.2cm (5.75" x 1.46" x 3.62"), W, D, H
On-wall mount unit: 14.6cm x 1.1cm x 9.1cm (5.75" x 0.43" x 3.58"), W, D, H
Weight:
Shipping weight: 1.8kg (3.97lbs) approx.; Touch panel: 0.37kg (0.8lbs) approx.
Included Accessories:
Power supply unit adapter (5V, 4.0A AC/DC), tabletop mount, on-wall mount unit,
panel-mount plate, right-angle OTG USB cable, installation screws
Certifications:
CE/CB, FCC, ROHS, REACH
Mounting Options:
Table top (with tabletop mount unit), on-wall (with mount unit and panel mount plate)
Specifications are subject to change without notice at www.kramerav.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 4
Language                        : en-US
Tagged PDF                      : Yes
Title                           : KT-107/KT-107RB
Author                          : Jeremy Karp;DPhilosoph@kramerel.com
Subject                         : Touch Panel
Creator                         : Microsoft® Word 2010
Create Date                     : 2017:06:22 15:37:55+03:00
Modify Date                     : 2017:06:22 15:37:55+03:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools