Kyocera IUC19AB User Terminal of Wireless Internet System User Manual
Kyocera Corporation User Terminal of Wireless Internet System
Kyocera >
Contents
- 1. User Manual
- 2. User Manual 1 of 2
- 3. User Manual 2 of 2
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 705471 |
| Application ID | 87vm1s/UgOlYZVIe6YeqKA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 172.63kB (2157872 bits) |
| Date Submitted | 2006-09-15 00:00:00 |
| Date Available | 2006-09-15 00:00:00 |
| Creation Date | 2006-08-21 20:09:35 |
| Producing Software | AFPL Ghostscript 8.13 |
| Document Lastmod | 2006-08-21 20:16:53 |
| Document Title | Microsoft Word - Q34T-EE-001_UTcUsersManualR101 for FCC.doc |
| Document Creator | PrimoPDF http://www.primopdf.com |
| Document Author: | yamamoto |
iBurst Modem Card Model (UTC) Manual Approved Checked Designed Koyama Yamamoto Hirao Reference: Revision: Date: Kyocera Corporation -1- Q34T-EE-001 1.01 June.08.2006 Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual Revision Record Revision 1.00 1.01 Author Hirao Miyasaka Kyocera Corporation Date May.10.2006 June.08.2006 Detail First Release Correct some writings -2- Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual CONTENTS Safety Precautions on iBurst Modem ................................................................ ............................................................................ ............................................ 4 Chapter 1 Introduction ................................................................ ................................................................................................ .................................................................. .................................. 8 Components List ................................................................ ................................................................................................ ................................................................................................ ................................................................................ ................................................ 9 Outlook of iBurst Modem ................................................................ ................................................................................................ ................................................................................................ ................................................................... ................................... 9 Requirements on your PC ................................................................ ................................................................................................ ................................................................................................ ................................................................ 10 Outlook to use the iBurst Modem................................ Modem................................................................ ................................................................................................ ..................................................................................... ..................................................... 10 Indicators ................................................................ ................................................................................................ ................................................................................................ ......................................................................................... ......................................................... 10 Chapter 2 Setup Procedure ................................................................ .......................................................................................... .......................................................... 11 iBurst Software Installation .............................................................................................................. 12 Installation for Windows XP ................................................................ ................................................................................................ ............................................................................................ ............................................................ 12 Installation for Windows 2000 ................................................................ ................................................................................................ ......................................................................................... ......................................................... 15 Installation Installation for Windows Me ................................................................ ................................................................................................ ............................................................................................ ............................................................ 18 Installation for Windows 98SE................................ 98SE ................................................................ ................................................................................................ ......................................................................................... ......................................................... 36 Installation for Mac OS X................................ X................................................................ ................................................................................................ ................................................................................................ ................................................................. ................................. 56 Connection Establishment ................................................................................................................. 60 Connection Establishment for Windows XP ................................................................ ................................................................................................ ..................................................................... ..................................... 60 Connection Establishment for Windows Windows 2000/Me/98SE ................................................................ ................................................................................... ................................................... 65 Connection Establishment for Mac OS X ................................................................ ................................................................................................ ......................................................................... ......................................... 66 Chapter 3 Utility Software ................................................................ .......................................................................................... .......................................................... 70 Using Utility Software........................................................................................................................ 71 Software Using Utility Software for Windows................................ Windows ................................................................ ................................................................................................ ................................................................................. ................................................. 71 Using Utility Software for Mac OS X ................................................................ ................................................................................................ ............................................................................... ............................................... 77 Chapter 4 MTU Optimizer Software & Network Property .......................................... .......................................... 83 MTU Optimizer Software & Network Property................................................................................ 84 Property Chapter 5 Uninstallation ................................................................ ............................................................................................. ............................................................. 87 iBusrt Software Uninstallation.......................................................................................................... 88 Uninstallation Uninstallation for Windows XP/2000 XP/2000 ................................................................ ................................................................................................ ............................................................................... ............................................... 88 Uninstallation for Windows Me/98SE ................................................................ ................................................................................................ .............................................................................. .............................................. 90 Uninstallation for Mac OS X ................................................................ ................................................................................................ ............................................................................................ ............................................................ 97 Chapter 6 Trouble shooting................................ shooting................................................................ .......................................................................................... .......................................................... 99 Windows............................................................................................................................................. 100 Windows Illegal hanghang-up when install iBurst Modem. ................................................................ ................................................................................................ ................................................................... ...................................100 ... 100 Illegal hanghang-up when set up dialer................................ dialer ................................................................ ................................................................................................ .................................................................................. ..................................................102 .................. 102 Mac ..................................................................................................................................................... 104 Data rate ................................................................ ................................................................................................ ................................................................................................ ......................................................................................... .........................................................104 ......................... 104 Chapter 7 Information ................................................................ ............................................................................................... ............................................................... 105 FCC Compliance Statement............................................................................................................. 106 Statement FCC RF Radiation Exposure Statement ......................................................................................... 106 Kyocera Corporation -3- Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual Safety Precautions on iBurst Modem • Things you must know • • • When using the product, use it correctly according to the safety precautions. The product uses particular radio frequency band tuned for the network operator. The safety precautions, hardware, software, and the design of the product may be changed in the future without any announcement to the customers. • About use restriction • • The product is designed as an OA apparatus for home use. Please use it neither in the medical apparatus directly to affect a human life, nor the system of which very high reliability is required. Do not use the product in the zone where the wireless machines are forbidden, such as an airplane and a hospital. An electric device and medical apparatus are affected and it becomes the cause of the accident. • About Qualification • • • • • • • • Our company does not take any responsibility about the damage produced by use under the conditions such as natural disasters, earthquake, flood, fires, misuse by intent or carelessness or other than the responsibility of our company. Our company does not take any responsibility about the damage produced by external factor, failure, malfunction, and fault of product, such as loss of enterprise profits, enterprise discontinuation, change and disappearance of the contents of memory etc. Our company takes no responsibility about the damage produced by not keeping the written contents of an owner's manual. Our company takes no responsibility about the damage produced from incorrect operation in combination with the connection apparatus and software in which our company is not participating etc. iBurst ™ is a registered trademark of ArrayComm, Inc. Mac OS X is a registered trademark of Apple Computer, Inc. Windows is a registered trademark of Microsoft Corporation. In addition, the name of the software carried in this document and peripheral equipment is each company’s trademark, or a registered trademark. Kyocera Corporation -4- Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual • For your safety -------- Danger -------(If used improperly, may cause death or serious injury.) • • • Do not use with an abnormal condition, such as with emission of smoke or odor. It may cause fire or electric shock. Do not disassemble or remodel the product. It may cause fire or electrical shock. Do not use or place the product at places with high humidity such as in the bath room or near the humidifier. It may cause fire or electric shock. And do not touch the product with wet hands. Kyocera Corporation -5- Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual ------- Warning -------(If used improperly, may cause disability or physical damage.) • • • • • • • • Do not give a shock strong against the product, such as dropping and throwing. It becomes the cause of failure. Moreover, do not ride on the product. It may become the cause of an injury. Do not put the product under direct sunshine or near equipment with high temperature such as a stove and a heater. It may raise the temperature of the interior and cause fire. Do not put the product at places with an extreme fluctuation of temperature, such as near the air conditioner or a heater. The dew condensation may occur in the interior and cause fire, electrical shock, and malfunction. Do not put the product at places with oil and steams such as in the kitchen. In addition, do not put it at dusty places and places where metal powder and toxic gas occur. It may cause fire or electric shock. Do not place the product on unstable places such as on an unsteady desk or slanted surfaces. In addition, do not put any object on the product. It may loose balance and tumble, or fall and cause injury. When the thunder occurs in near, do not use the product and its peripheral equipment. It may become the cause of an electric shock. Do not touch the connector pins directly with your hands. Static electricity may affect the components. As static electricity is created from both the cloth and the human body, before putting or removing the product, release static electricity by touching a metal object such as a small cabinet. Do not use it in the intense place of vibration. It becomes the cause of failure. Kyocera Corporation -6- Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual -------- Caution -------(If treated improperly, the equipment may not perform or work properly.) • • • • Do not put the product at low temperature. The product may not function properly. Do not put the product on the top of magnetic objects and places where electromagnetic waves occur. This includes electrical appliances, AV, and OA (microwave oven, speaker, TV, radio, fluorescent light, inverter air conditioner, and electric kitchen appliances). The product will not be able to make communication properly if effected by magnetism or electronic noise. Putting the product near TV or radio may cause RF receive error. The product lifetime may shorten if used at places with hydrogen sulfide such as at a hot spring. Data communication will be disabled or a data file may corrupt if the PC is turned off or the product is separated from the PC during the communication. Important data must be verified against the original data. Kyocera Corporation -7- Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual Chapter 1 Introduction This chapter describes what should be confirmed before using iBurst Modem. Modem. Kyocera Corporation -8- Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual Components List The table below shows the list of components. Please confirm items in the package. UTC model Component iBurst Modem Notes UTC model Refer to the pictures shown below. Q’ty Q’ty Outlook of iBurst Modem UTC model Link/Communication Indicator Power Indicator External antenna port PC card connector Kyocera Corporation -9- Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual Requirements on your PC • PC/AT Compatible PC with WindowsXP/2000/Me/98SE; or version 10.1.5 or later version of Mac OS X except Mac Intel model. • PCMCIA Type II slot complied with the PC card standard 95 or later. Outlook to use the iBurst Modem A UTC model shall be plugged into a PC card slot of your PC. Before inserting it, you have to install iBurst software which includes device drivers. Please read through every sections related with the operating system for details. Insertion of iBurst Modem iBurst Modem PC card slot Indicators Indicators The table below describes meaning of each indicator. Indicator Power Indicator Link/Communication Indicator State OFF Blue Red OFF Amber Yellow Green Kyocera Corporation Meaning Turned OFF Turned ON Fault Turned OFF No signal receiving Weak signal receiving Blinking when communicating. Strong signal receiving Blinking when communicating. - 10 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual Chapter Chapter 2 Setup Procedure This chapter describes how to install iBurst software, then guides you how to make a network connection so as to use data communication service. Kyocera Corporation - 11 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual iBurst Software Installation Installation This section shows the procedure to install iBurst software on your PC for utilizing iBurst Modem. The procedure shall be done once before using it. Installation for Windows XP ATTENTION: Don’t choose “PCIC Compatible” mode of PC card controller in BIOS menu if your PC has such menu. Please choose “Auto-Selected” or “CardBus/16bit” if BIOS has it. There is a case that some models of PCs cannot drive iBurst Modem due to BIOS or PC card driver problem. 1. Make sure to remove the iBurst Modem from your PC. ATTENTION: Don’ Don’t plug the iBurst Modem into your PC until completion of installation. 2. Turn your PC on. 3. Insert the Software Utility CD provided by the network operator into your CD-ROM drive; or execute the appropriate installation software. 4. iBurst Setup starts. Click the [Next >] button. Kyocera Corporation - 12 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 5. Select [I accept the terms the license agreement], click the [Next >] button. 6. Click the [Next >] button after appearing dialog window as shown below. NOTE: To install to a different folder, click [Browse…] and specify another folder. 7. Click the [Next >] button. Kyocera Corporation - 13 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 8. The following dialog window will appear, and installation of software begins. 9. When the installing process finishes, the dialog window shown below will appear. Select “Yes, I want to restart my computer now” and click the [Finish] button in the dialog window. 10. After finish of restarting, plug the iBurst Modem into a PC card slot of your PC. The iBurst Modem will be recognized and will be ready to use automatically. NOTE: If the PC request to restart again, click [Yes] to restart the PC. NOTE: To connect to the Internet, refer to page 59. Kyocera Corporation - 14 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual Installation for Windows 2000 ATTENTION: Don’t choose “PCIC Compatible” mode of PC card controller in BIOS menu if your PC has such menu. Please choose “Auto-Selected” or “CardBus/16bit” if BIOS has it. There is a case that some models of PCs cannot drive iBurst Modem due to BIOS or PC card driver problem. 1. Make sure to remove the iBurst Modem from your PC. ATTENTION: Don’ Don’t plug the iBurst Modem into your PC until completion of installation. 2. Turn your PC on. 3. Insert the Software Utility CD provided by the network operator into your CD-ROM drive; or execute the appropriate installation software. 4. iBurst Setup starts. Click the [Next >] button. 5. Select [I accept the terms the license agreement], click the [Next >] button. Kyocera Corporation - 15 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 6. Click the [Next >] button after appearing dialog window as shown below. NOTE: To install to a different folder, click [Browse…] and specify another folder. 7. Click the [Next >] button. 8. The following dialog window will appear, and installation of software begins. Kyocera Corporation - 16 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 9. When the installing process finishes, the dialog window shown below will appear. Select [Yes, I want to restart my computer now] and click the [Finish] button in the dialog window. 10. After finish of restarting, plug the iBurst Modem into a PC card slot of your PC. The iBurst Modem will be recognized and will be ready to use automatically. NOTE: If the PC request to restart again, click [Yes] to restart the PC. NOTE: To connect to the Internet, refer to page 64. Kyocera Corporation - 17 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual Installation for Windows Me Me ATTENTION: Don’t choose “PCIC Compatible” mode of PC card controller in BIOS menu if your PC has such menu. Please choose “Auto-Selected” or “CardBus/16bit” if BIOS has it. There is a case that some models of PCs cannot drive iBurst Modem due to BIOS or PC card driver problem. Since the the installation disk of Windows Windows Me may be be required while driver installation, please prepare the the CD or copy the CD into a hard disk in your PC for it. 1. Make sure to remove the iBurst Modem from your PC. ATTENTION: Don’ Don’t plug the iBurst Modem into your PC until completion of installation. 2. Turn your PC on. 3. Insert the Software Utility CD provided by the network operator into your CD-ROM drive; or execute the appropriate installation software. 4. iBurst Setup starts. Click the [Next >] button. 5. Select [I accept the terms the license agreement], click the [Next >] button. Kyocera Corporation - 18 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 6. Click the [Next >] button after appearing dialog window as shown below. NOTE: To install to a different folder, click [Browse…] and specify another folder. 7. Click the [Next >] button. 8. The following dialog window will appear, and installation of software begins. Kyocera Corporation - 19 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 9. Click the [Finish] button. 10. Plug the iBurst Modem into a PC card slot of your PC. Windows will detect the iBurst Modem as a new hardware so that [Add New Hardware Wizard] will begin. 11. Confirm the device name indicated shall be [iBurst Modem] or [iBurst Modem Type 02-01]. Select [Specify the location of the driver (Advanced)] and click the [Next >] button in the dialog window. The device name detected shall be; “Kyocera Corporation-iBurst Modem” or “Kyocera Corporation-iBurst Modem Type 02-01”. Kyocera Corporation - 20 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 12. Select [Search for the best driver for your device.(Recommended)], then check [Specify a location] and click the [Browse] button. 13. Select [C:\Program Files\iBurst\bin], and click the [OK] button. 14. Click the [Next >] button. Kyocera Corporation - 21 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 15. Confirm the driver file name indicated shall be [NETIBST.INF] or [NETIBT21.INF]. Click the [Next >] button. The device name detected shall be; “iBurst Modem” or “iBurst Modem Type 02-01”. The driver file name shall be; “NETIBST.INF” or “NETIBT21.INF”. 16. Click the [Finish] button. The name of the network adaptor shall be; “iBurst Modem” or “iBurst Modem Type 02-01”. 17. The dialog window shown below will appear, click the [Yes] button, and restart your PC. NOTE: If the PC doesn’t shutdown itself, try to press Alt+Ctrl+Del keys several times. Kyocera Corporation - 22 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 18. Click the [Start] -> [Settings] -> [Control Panel] to open Control Panel as shown below, and then double click [Add New Hardware]. 19. Click the [Next >] button. 20. Click the [Next >] button. Kyocera Corporation - 23 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual NOTE: If the dialog window shown below appears, select [No, the device isn’t in the list] and click the [Next >] button. 21. Select [No, I want to select the hardware from a list], and click the [Next >] button. 22. Select [Ports (COM & LPT)], and click the [Next >] button. Kyocera Corporation - 24 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 23. Click the [Have Disk..] button. 24. Click the [Browse...] button. 25. Select [C:\Program Files\iBurst\bin], and click the [OK] button. NOTE: You don’t have to select a file name. Windows will find an appropriate file automatically. Kyocera Corporation - 25 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 26. Click the [OK] button. 27. Select [iBurst Virtual COM Port], and click the [Next >] button. 28. Click the [Next >] button. Kyocera Corporation - 26 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 29. Click the [Finish] button. 30. The dialog window shown below will appear, click the [Yes] button to SHUTDOWN your PC. NOTE: If the PC doesn’t shutdown itself, try to press Alt+Ctrl+Del keys several times. 31. Turn your PC on again. Kyocera Corporation - 27 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 32. Click the [Start] -> [Settings] -> [Control Panel] to open Control Panel as shown below, and then double click [Modems]. NOTE: If the dialog window as shown below appears, click the [Add] button. Kyocera Corporation - 28 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 33. Check [Don’t detect my modem; I will select it from a list], and click the [Next >] button. 34. Click the [Have Disk...] button. 35. Click the [Browse…] button. Kyocera Corporation - 29 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 36. Select [C:\Program Files\iBurst\bin], and click the [OK] button. NOTE: You don’t have to select a file name. Windows will find an appropriate file automatically. 37. Click the [OK] button. 38. Select [iBurst Virtual MODEM], and click the [Next >] button. Kyocera Corporation - 30 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 39. Select [iBurst Virtual COM Port (COM X)], and click the [Next >] button. NOTE: The ‘X’ in “COM X” above is a COM port number assigned automatically. NOTE: If the dialog window as shown below appears, type a dummy number in “What are (or city) code are you in now ?” and then click the [Next >] button. 40. Click the [Finish] button. Kyocera Corporation - 31 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 41. Click the [OK] button. 42. Click the [Start] -> [Settings] -> [Control Panel] to open Control Panel as shown below, and then double click [Network]. Kyocera Corporation - 32 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 43. Click the [Add…] button on [Configuration] tab. The name of a network adaptor shall be; “iBurst Modem” or “iBurst Modem Type 02-01”. 44. Select [Protocol] and click the [Add…] button. 45. Click the [Have Disk…] button. Kyocera Corporation - 33 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 46. Click the [Browse…] button. 47. Select [C:\Program Files\iBurst\bin], and click the [OK] button. NOTE: You don’t have to select a file name. Windows will find an appropriate file automatically. 48. Click the [OK] button. 49. Select [NDIS(PPPoE) Usermode I/O Protocol], click the [OK] button. Kyocera Corporation - 34 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual NOTE: If the same dialog at step 45 is popped up again, cancel once and repeat from step 43. 50. Click the [OK] button. NOTE: One of the protocols added shall be; “NDIS(PPPoE) User mode I/O Protocol -> iBurst Modem”; or “NDIS(PPPoE) User mode I/O Protocol -> iBurst Modem Type 02-01”. 51. The dialog window shown below will appear, click the [Yes] button, and restart your PC. NOTE: If the PC doesn’t shutdown itself, try to press Alt+Ctrl+Del keys several times. NOTE: To connect to the Internet, refer to page 64. Kyocera Corporation - 35 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual Installation for Windows 98SE ATTENTION: Don’t choose “PCIC Compatible” mode of PC card controller in BIOS menu if your PC has such menu. Please choose “Auto-Selected” or “CardBus/16bit” if BIOS has it. There is a case that some models of PCs cannot drive iBurst Modem due to BIOS or PC card driver problem. Since the the installation disk of WINDOWS 98SE may be required while driver installation, please prepare the CD or copy the CD into a hard disk in your PC for it. 1. Make sure to remove the iBurst Modem from your PC. ATTENTION: Don’ Don’t plug the iBurst Modem into your PC until completion of installation. 2. Turn your PC on. 3. Insert the Software Utility CD provided by the network operator into your CD-ROM drive; or execute the appropriate installation software. 4. iBurst Setup starts. Click the [Next >] button. 5. Select [I accept the terms the license agreement], click the [Next >] button. Kyocera Corporation - 36 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 6. Click the [Next >] button after appearing dialog window as shown below. NOTE: To install to a different folder, click [Browse…] and specify another folder. 7. Click the [Next >] button. 8. The following dialog window will appear, and installation of software begins. Kyocera Corporation - 37 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 9. Click the [Finish] button. 10. Plug the iBurst Modem into a PC card slot of your PC. Windows will detect the iBurst Modem as a new hardware so that [Add New Hardware Wizard] will begin. 11. Confirm the device name indicated shall be [iBurst Modem] or [iBurst Modem Type 02-01]. Click the [Next >] button. The device name detected shall be; “Kyocera Corporation-iBurst Modem” or “Kyocera Corporation-iBurst Modem Type 02-01”. Kyocera Corporation - 38 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 12. Select [Search for the best driver for your device.(Recommended)], and then check the [Next >] button. 13. Check [Specify a location] and click the [Browse] button. 14. Select [C:\Program Files\iBurst\bin], and click the [OK] button. Kyocera Corporation - 39 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 15. Click the [Next >] button. 16. Confirm the driver file name indicated shall be [NETIBST.INF] or [NETIBT21.INF]. Click the [Next >] button. The device name detected shall be; “iBurst Modem” or “iBurst Modem Type 02-01”. The driver file name shall be; “NETIBST.INF” or “NETIBT21.INF”. NOTE: If the dialog window as shown below appears, insert [Windows 98SE CD-ROM] into the CD-ROM drive and click the [OK] button. Kyocera Corporation - 40 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual NOTE: If the dialog window as shown below appears, insert [Windows 98SE CD-ROM] into your PC and enter the directory of your [Windows 98SE CD-ROM], click the [OK] button. “xxxxxxxx“ in the picture below is a file name that can not be found. 17. Click the [Finish] button. The name of the network adaptor shall be; “iBurst Modem” or “iBurst Modem Type 02-01”. 18. The dialog window shown below will appear, click the [Yes] button, and restart your PC. NOTE: If the PC doesn’t shutdown itself, try to press Alt+Ctrl+Del keys several times. Kyocera Corporation - 41 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 19. Click the [Start] -> [Settings] -> [Control Panel] to open Control Panel as shown below, and then double click [Add New Hardware]. 20. Click the [Next >] button. 21. Click the [Next >] button. Kyocera Corporation - 42 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual NOTE: If the dialog window as shown below appears, select [No, the device isn’t in the list] and click the [Next >] button. 22. Select [No, I want to select the hardware from a list.], and click the [Next >] button. 23. Select [Ports (COM & LPT)], and click the [Next >] button. Kyocera Corporation - 43 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 24. Click the [Have Disk..] button. 25. Click the [Browse…] button. 26. Select [C:\Program Files\iBurst\bin], and click the [OK] button. NOTE: You don’t have to select a file name. Windows will find an appropriate file automatically. Kyocera Corporation - 44 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 27. Click the [OK] button. 28. Select [iBurst Virtual COM Port], and click the [Next >] button. 29. Click the [Next >] button. Kyocera Corporation - 45 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual NOTE: If the dialog window as shown below appears, insert [Windows 98SE CD-ROM] into the CD-ROM drive and click the [OK] button. NOTE: If the dialog window as shown below appears, insert [Windows 98SE CD-ROM] into your PC and enter the directory of your [Windows 98SE CD-ROM],click the [OK] button. “xxxxxxxx“ in the picture below is a file name that can not be found. 30. Click the [Finish] button. 31. The dialog window shown below will appear, click the [Yes] button to SHUTDOWN your PC. NOTE: If the PC doesn’t shutdown itself, try to press Alt+Ctrl+Del keys several times. Kyocera Corporation - 46 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 32. Turn your PC on again. 33. Click the [Start] -> [Settings] -> [Control Panel] to open Control Panel as shown below, and then double click [Modems]. NOTE: If the dialog window as shown below appears, click the [Add] button. Kyocera Corporation - 47 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 34. Select [Other], and click the [Next >] button. 35. Check [Don’t detect my modem, I will select it from a list] and click the [Next >] button. 36. Click the [Have Disk…] button. Kyocera Corporation - 48 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 37. Click the [Browse…] button. 38. Select [C:\Program Files\iBurst\bin], and click the [OK] button. NOTE: You don’t have to select a file name. Windows will find an appropriate file automatically. 39. Click the [OK] button. 40. Select [iBurst Virtual MODEM], and click the [Next >] button. Kyocera Corporation - 49 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 41. Select [iBurst Virtual COM Port (COM X)], and click the [Next >] button. NOTE: The ‘X’ in “COM X” above is a COM port number assigned automatically. NOTE: If the dialog window as shown below appears, type a dummy number in “What are (or city) code are you in now ?” and then click the [Next >] button. 42. Click the [Finish] button. Kyocera Corporation - 50 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 43. Click the [OK] button. 44. Click the [Start] -> [Settings] -> [Control Panel] to open Control Panel as shown below, and then double click [Network]. Kyocera Corporation - 51 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 45. Click the [Add] button on [Configuration] tab. The name of a network adaptor shall be; “iBurst Modem” or “iBurst Modem Type 02-01”. 46. Select [Protocol] and click the [Add…] button. 47. Click the [Have Disk…] button. Kyocera Corporation - 52 - Revision 1.01 --- June.08.2006 iBurst Modem Card Model (UTC) Manual 48. Click the [Browse…] button. 49. Select [C:\Program Files\iBurst\bin], and click the [OK] button. NOTE: You don’t have to select a file name. Windows will find an appropriate file automatically. 50. Click the [OK] button. Kyocera Corporation - 53 - Revision 1.01 --- June.08.2006
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 53 Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:8964c5a4-8d42-40e5-bbae-dcf991d13d48 Producer : AFPL Ghostscript 8.13 Modify Date : 2006:08:21 20:16:53+09:00 Create Date : 2006:08:21 20:09:35Z Creator Tool : PrimoPDF http://www.primopdf.com Metadata Date : 2006:08:21 20:16:53+09:00 Document ID : uuid:7873d672-95c7-4e6d-bb57-5706bc7568c9 Format : application/pdf Title : Microsoft Word - Q34T-EE-001_UTcUsersManualR101 for FCC.doc Creator : yamamoto Author : yamamotoEXIF Metadata provided by EXIF.tools