Kyocera IUU19AC iBurst User Terminal User Manual Manual 1

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 1 -

Uetani Yamamoto

Koyama

Designed

Checked

Approved

Oct

ober 28

, 2008

Date:

1.00

Revision:

S40

T

-

EE

-

0

06

Reference:

For Mac OS X 10.4/10.5

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 2 -

Revision History

Revision

Author Date Detail

1.00 Uetani Oct. 28, 2008 First Edition

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 3 -

CONTENTS

CONTENTS CONTENTS

CONTENTS

Safety Precautions on iBurst Terminal

Safety Precautions on iBurst TerminalSafety Precautions on iBurst Terminal

Safety Precautions on iBurst Terminal ................................

................................................................

.......................................

..............

....... 4

44

4

Chapter 1

Chapter 1Chapter 1

Chapter 1

Introduction

IntroductionIntroduction

Introduction ................................

................................................................

...........................................................

......................................................

........................... 6

66

6

Components List

Components ListComponents List

Components List................................

................................................................

.....................................

..........

.....7

77

7

Requirements on your PC

Requirements on your PCRequirements on your PC

Requirements on your PC ................................

................................................................

........................................................

................................................

........................7

77

7

Outlook of iBurst Terminal

Outlook of iBurst TerminalOutlook of iBurst Terminal

Outlook of iBurst Terminal ................................

................................................................

......................................................

............................................

......................7

77

7

Indicators

IndicatorsIndicators

Indicators................................

................................................................

...............................................

..............................

...............8

88

8

Outlook to use the iBurst Terminal

Outlook to use the iBurst TerminalOutlook to use the iBurst Terminal

Outlook to use the iBurst Terminal................................

................................................................

...........................................

......................

...........8

88

8

Chapter 2

Chapter 2Chapter 2

Chapter 2

Setup Procedure

Setup ProcedureSetup Procedure

Setup Procedure................................

................................................................

.....................................................

..........................................

..................... 9

99

9

Installation for Mac O

Installation for Mac OInstallation for Mac O

Installation for Mac OS X

S XS X

S X................................................................................................................... 10

Connection Settings for Mac OS X 10.4

Connection Settings for Mac OS X 10.4Connection Settings for Mac OS X 10.4

Connection Settings for Mac OS X 10.4............................................................................................. 14

Connection Settings for Mac OS X 10.5

Connection Settings for Mac OS X 10.5Connection Settings for Mac OS X 10.5

Connection Settings for Mac OS X 10.5............................................................................................. 18

Chapter 3

Chapter 3Chapter 3

Chapter 3

Utility Software

Utility SoftwareUtility Software

Utility Software ................................

................................................................

...................................................

......................................

................... 24

2424

24

Utility Software on Mac OS X

Utility Software on Mac OS XUtility Software on Mac OS X

Utility Software on Mac OS X............................................................................................................ 25

Chapter 4

Chapter 4Chapter 4

Chapter 4

Uninstallation

UninstallationUninstallation

Uninstallation................................

................................................................

......................................................

............................................

...................... 32

3232

32

Uninstallation for Mac OS X

Uninstallation for Mac OS XUninstallation for Mac OS X

Uninstallation for Mac OS X.............................................................................................................. 33

Appendix

AppendixAppendix

Appendix ................................

................................................................

..................................................

....................................

.................. 35

3535

35

Maximum data rate on Mac

Maximum data rate on MacMaximum data rate on Mac

Maximum data rate on Mac ............................................................................................................... 36

FCC Compliance Statement

FCC Compliance StatementFCC Compliance Statement

FCC Compliance Statement............................................................................................................... 36

FCC RF Radiation Exposure Statement

FCC RF Radiation Exposure StatementFCC RF Radiation Exposure Statement

FCC RF Radiation Exposure Statement ........................................................................................... 37

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 4 -

Safety Precautions on iBurst Term

Safety Precautions on iBurst TermSafety Precautions on iBurst Term

Safety Precautions on iBurst Terminal

inalinal

inal

• Things you must know

• When using the product, use it correctly according to the safety precautions.

• The product uses particular radio frequency band tuned for the network operator.

• The safety precautions, hardware, software, and the design of the product may be changed

in the future without any announcement to the customers.

• About use restriction

• The product is designed as an OA apparatus for home use. Please use it neither in the

medical apparatus directly to affect a human life, nor the system of which very high

reliability is required.

• Do not use the product in the zone where the wireless machines are forbidden, such as an

airplane and a hospital. An electric device and medical apparatus are affected and it

becomes the cause of the accident.

• About Qualification

• Our company does not take any responsibility about the damage produced by use under

the conditions such as natural disasters, earthquake, flood, fires, misuse by intent or

carelessness or other than the responsibility of our company.

• Our company does not take any responsibility about the damage produced by external

factor, failure, malfunction, and fault of product, such as loss of enterprise profits,

enterprise discontinuation, change and disappearance of the contents of memory etc.

• Our company takes no responsibility about the damage produced by not keeping the

written contents of an owner's manual.

• Our company takes no responsibility about the damage produced from incorrect operation

in combination with the connection apparatus and software in which our company is not

participating etc.

• iBurst ™ is a registered trademark of ArrayComm, Inc.

• Windows and Windows Vista are registered trademarks of Microsoft Corporation.

• Mac OS X is a registered trademark of Apple Inc.

• In addition, the name of the software carried in this document and peripheral equipment is

each company’s trademark, or a registered trademark.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 5 -

• For your safety

-------- Danger

Danger Danger

Danger --------

----------------

--------

( If used improperly, may cause death or serious injury. )

• Do not use with an abnormal condition, such as with emission of smoke or odor. It may

cause fire or electric shock.

• Do not disassemble or remodel the product. It may cause fire or electrical shock.

• Do not use or place the product at places with high humidity such as in the bath room or

near the humidifier. It may cause fire or electric shock. And do not touch the product with

wet hands.

------- Warning

Warning Warning

Warning --------

----------------

--------

( If used improperly, may cause disability or physical damage. )

• Do not give a shock strong against the product, such as dropping and throwing. It becomes

the cause of failure. Moreover, do not ride on the product. It may become the cause of an

injury.

• Do not put the product under direct sunshine or near equipment with high temperature

such as a stove and a heater. It may raise the temperature of the interior and cause fire.

• Do not put the product at places with an extreme fluctuation of temperature, such as near

the air conditioner or a heater. The dew condensation may occur in the interior and cause

fire, electrical shock, and malfunction.

• Do not put the product at places with oil and steams such as in the kitchen. In addition, do

not put it at dusty places and places where metal powder and toxic gas occur. It may cause

fire or electric shock.

• Do not place the product on unstable places such as on an unsteady desk or slanted

surfaces. In addition, do not put any object on the product. It may loose balance and

tumble, or fall and cause injury.

• When the thunder occurs in near, do not use the product and its peripheral equipment. It

may become the cause of an electric shock.

• Do not touch the connector pins directly with your hands. Static electricity may affect the

components. As static electricity is created from both the cloth and the human body, before

putting or removing the product, release static electricity by touching a metal object such

as a small cabinet.

• Do not use it in the intense place of vibration. It becomes the cause of failure.

-------- Caution

CautionCaution

Caution --------

( If treated improperly, the equipment may not perform or work properly. )

• Do not put the product at low temperature. The product may not function properly.

• Do not put the product on the top of magnetic objects and places where electromagnetic

waves occur. This includes electrical appliances, AV, and OA (microwave oven, speaker, TV,

radio, fluorescent light, inverter air conditioner, and electric kitchen appliances). The

product will not be able to make communication properly if effected by magnetism or

electronic noise. Putting the product near TV or radio may cause RF receive error.

• The product lifetime may shorten if used at places with hydrogen sulfide such as at a hot

spring.

• Data communication will be disabled or a data file may corrupt if the PC is turned off or

the product is separated from the PC during the communication. Important data must be

verified against the original data.

• When connecting the product onto PC via USB cable, use the enclosed USB cable.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 6 -

Chapter 1

Chapter 1Chapter 1

Chapter 1

Introduction

IntroductionIntroduction

Introduction

7

This chapter

This chapter This chapter

This chapter describes what should be confirmed

describes what should be confirmed describes what should be confirmed

describes what should be confirmed before

before before

before

using iBurst

using iBurst using iBurst

using iBurst Terminal

TerminalTerminal

Terminal.

..

.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 7 -

Components List

Components List Components List

Components List

The table below shows the list of components. Please confirm items in the package.

USB model

Component

ComponentComponent

Component

Notes

NotesNotes

Notes

Q’

Q’Q’

Q’ty

tyty

ty

iBurst Terminal Unit of USB model

*Refer to the picture shown below.

1

USB Extension Cable Type: USB1.1

Length: 1m

1

Holder *Refer to the picture shown below. 1

Requirements on your PC

Requirements on your PC Requirements on your PC

Requirements on your PC

• version 10.4/10.5 of Mac OS X; or

PC/AT Compatible PC with Windows Vista/XP (x86 based).

(Refer to the manual for Windows.)

• 1 USB1.1 port or a later version of USB port.

Outlook of iBurst Terminal

Outlook of iBurst Terminal Outlook of iBurst Terminal

Outlook of iBurst Terminal

USB model

USB connector

Link/Communication Indicator

Antenna

Holder

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 8 -

Indicator

IndicatorIndicator

Indicators

s s

s

The table below describes meaning of each indicator.

Indicator State Meaning

Link/Communication Indicator OFF Turned OFF

Amber No signal receiving

Yellow Weak signal receiving

Flashing when communicating.

Green Strong signal receiving

Flashing when communicating.

Amber/Yellow

Fault (Flashing)

Outlook to use the iBurst Terminal

Outlook to use the iBurst Terminal Outlook to use the iBurst Terminal

Outlook to use the iBurst Terminal

A USB model shall be connected to a USB port of your PC directly or via USB cable. Before

connecting the USB interface, you have to install iBurst software which includes device drivers.

Please read through every sections related with the operating system for details.

USB Connection

USB Cable

UTU

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 9 -

Chap

ChapChap

Chapter 2

ter 2ter 2

ter 2

Setup Procedure

Setup ProcedureSetup Procedure

Setup Procedure

This chapter describes how to install

This chapter describes how to install This chapter describes how to install

This chapter describes how to install iBurst software,

iBurst software,iBurst software,

iBurst software, then

then then

then

guides you how to make a network connection so as to use

guides you how to make a network connection so as to use guides you how to make a network connection so as to use

guides you how to make a network connection so as to use

data communication service.

data communication service.data communication service.

data communication service.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 10 -

Installation

Installation Installation

Installation for

forfor

for Mac OS X

Mac OS X Mac OS X

Mac OS X

NOTE:

Package lineup of the installation software are for Mac OS X 10.4 and 10.5. Please choose an

appropriate package according to OS version and processor type on your PC. If you attempt to

install a wrong package, installation will be rejected.

NOTE:

All screen copies in this section are captured on Mac OS X 10.4 if not mentioned.

1. Make sure to disconnect the iBurst Terminal with your PC.

ATTENTION:

Don

DonDon

Don’

’’

’t connect the iBurst Terminal with your PC until completion of installation.

t connect the iBurst Terminal with your PC until completion of installation.t connect the iBurst Terminal with your PC until completion of installation.

t connect the iBurst Terminal with your PC until completion of installation.

2. Turn your PC on and login as an administrative user.

3. Insert the Software Utility CD provided by the network operator into your CD-ROM drive; or

execute the appropriate installation software.

4. If the confirmation message shown below appears, click [Continue] button.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 11 -

5. Click the [Continue] button.

6. Click the [Continue] button.

7. The following dialog will appear, click the [Agree] button.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 12 -

8. Select a destination disk, and then click the [Continue] button. In case of 10.5, this window

may be skipped.

9. Click the [Install], or [Upgrade], button after appearing dialog window as shown below.

NOTE: Authentication dialog will appear at here. Fill an administrator name and

password, and then click the [OK] button.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 13 -

10. Click the [Continue installation] button.

11. When finish installing, the dialog shown below will appear. Click the [Restart] button.

12. To connect to the Internet, jump to the page listed below depending on Mac OS X version.

Mac OS X 10.4  page 14

Mac OS X 10.5  page 18

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 14 -

Connection

Connection Connection

Connection Settings

SettingsSettings

Settings

for

forfor

for Mac OS X

Mac OS X Mac OS X

Mac OS X

10.4

10.410.4

10.4

1. Make sure to connect the iBurst Terminal with your PC.

NOTE: The iBurst icon on the dock will be varied when a UT recognized via USB. See page 31.

2. Select [System Preferences…] on the Apple menu.

3. Click [Network] in the [System Preferences] window.

4. After the 1st connection with the iBurst Terminal, you will find the pop-up shown below. Take

note the name of the new port. Click [OK].

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 15 -

5. Click on the drop down menu of the [Show]; and

Select [Ethernet Adaptor (en XX)] indicated in the previous step.

NOTE: The ‘XX’ in the “en XX” is the port number and it may be the biggest one among

them when 1st connection.

Additionally, set as follows.

• Select the [PPPoE] tab.

• Check [Connect using PPPoE].

• Enter [Account Name] provided by the network operator.

• Enter [Password] provided by the network operator.

• Check [Save password] If you require the computer to remember your password.

• Check [Show PPPoE status in menu bar].

NOTE: If uncheck this option, you cannot see the icon described in the step 9 and 10.

• And then, click [PPPoE Options…]

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 16 -

6. On the PPPoE Options dialog, set any if required and click [OK].

7. Click the [Apply Now] button.

8. At this point, the connection configuration is completed. When you open any internet

application software, e.g. a web browser, the internet connectivity will be activated

automatically.

NOTE:

If you don’t enable “Connect

automatically when needed”, you have

to make a PPPoE connection following

the procedure described in the next

page every when you want to connect to

the Internet.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 17 -

NOTE: The step below is for easy connection/disconnection of PPPoE session manually.

9. Click the <---> icon at the top right of screen, and select the Ethernet Adapter you chose in step

5 as the default network adaptor. And then, click <---> again and click [Connect] to start

connecting or click [Disconnect] to clear connection.

NOTE: The steps below is to connect/disconnect PPPoE session manually on “Internet Connect”

dialog.

10. Click the <---> icon at the top right of screen, and choose [Open Internet Connect]

11. Select [Ethernet Adaptor (en XX)] you chose in step 5 and click the [Connect] or [Disconnect].

NOTE: In case that there are many network adaptors, you can find the adapter by

expanding icon array, by clicking “>>”, at the top of the dialog.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 18 -

Co

CoCo

Connection Settings for Mac OS X

nnection Settings for Mac OS X nnection Settings for Mac OS X

nnection Settings for Mac OS X 10.5

10.5 10.5

10.5

1. Make sure to connect the iBurst Terminal with your PC.

NOTE: The iBurst icon on the dock will be varied when a UT recognized via USB. See page 31.

2. Select [System Preferences…] on the Apple menu.

3. Click [Network] in the [System Preferences] window.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 19 -

4. You will find a new “Ethernet Adapter (enXX)” in the left side of the window. Select it.

NOTE: If you cannot find any “Ethernet Adapter (enXX)” on the window, Click “+”

button; and...

Click on the drop down menu of the [Interface]. You will find “Ethernet

Adaptor (en XX)”. And then, select it and click [Create].

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 20 -

5. Click on the drop down menu of the [Configure], and select [Create PPPoE Service…].

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 21 -

6. Specify a [Service Name]. “PPPoE” is the default name but you can change it. And then,

click [Done].

7. The service name specified above will be listed in the left side of the window. Select it and

configure parameters as follows.

• Enter [Account Name] provided by the network operator.

• Enter [Password] provided by the network operator.

• Check [Remember this password] if you require the computer to remember your password.

• Check [Show PPPoE status in menu bar].

NOTE: If uncheck this option, you cannot see the icon described in the step 11 and 12.

• And then, click [Advanced…]

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 22 -

8. Click [PPP] tab. Set any if required and click [OK].

9. Click the [Apply] button.

10. At this point, the connection configuration is completed. When you open any internet

application software, e.g. a web browser, the internet connectivity will be activated

automatically.

NOTE:

If you don’t enable “Connect

automatically when needed”, you have

to make a PPPoE connection following

the procedure described in the next

page every when you want to connect to

the Internet.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 23 -

NOTE: The step below is for easy connection/disconnection of PPPoE session manually.

11. Click the <---> icon at the top right of screen, and select [Connect “PPPoE”] to start connecting

or click [Disconnect “PPPoE”] to clear connection. Above-mentioned “PPPoE” must be the name

specified in step 6.

NOTE: The steps below is to connect/disconnect PPPoE session manually on “Network” dialog.

12. Click the <---> icon at the top right of screen, and choose [Open Network Preferences]

13. Select “PPPoE”, which must be the name specified in step 6, in the left side of the window and

click the [Connect] or [Disconnect].

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 24 -

Chapter 3

Chapter 3Chapter 3

Chapter 3

Utility Software

Utility SoftwareUtility Software

Utility Software

This chapter describes the feat

This chapter describes the featThis chapter describes the feat

This chapter describes the features and usage of the

ures and usage of the ures and usage of the

ures and usage of the

Utility Software

Utility Software Utility Software

Utility Software for iBurst Terminal.

for iBurst Terminal.for iBurst Terminal.

for iBurst Terminal.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 25 -

Utility Software on Mac OS X

Utility Software on Mac OS X Utility Software on Mac OS X

Utility Software on Mac OS X

To open the utility dialog.

1. Click the iBurst Terminal UTL icon on the Dock.

2. The iBurst_Terminal UTL dialog appears as shown in next page.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 26 -

Link Info Pane

[Link Info] pane indicates several communication statuses about iBurst Terminal.

The following descriptions are about each item on the pane.

(1) UTID

UTIDUTID

UTID

UTID is an identifier assigned to the iBurst Terminal. This will be used for maintenance

support.

(2) Link Status

Link StatusLink Status

Link Status

This indicates current link status between the iBurst Terminal and the access point.

Connect :

Connect :Connect :

Connect :

The link is connected.

No Connect

No Connect No Connect

No Connect : The iBurst Terminal is connected with your PC but the link is not

connected.

No iBurst Terminal :

No iBurst Terminal :No iBurst Terminal :

No iBurst Terminal :

There is no iBurst Terminal connected with your PC.

(3) Link Speed

Link SpeedLink Speed

Link Speed

This indicates current bandwidth allocated automatically between the iBurst Terminal

and a radio base station.

(4) Fram

FramFram

Frame Error Rate

e Error Ratee Error Rate

e Error Rate

This indicates current Frame Error Rate on the downlink air.

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 27 -

(5) Signal Strength

Signal StrengthSignal Strength

Signal Strength

This indicates current signal strength of the received radio signal. The signal bar

indicates the level visually in percentage and the status words are categorized according

to the percent level as follows.

No Signal :

No Signal :No Signal :

No Signal :

0%

Poor :

Poor :Poor :

Poor :

In the range of 1 to 24%

Fair :

Fair :Fair :

Fair :

In the range of 25 to 49%

Good

GoodGood

Good : In the range of 50 to 74%

Excellent :

Excellent :Excellent :

Excellent :

In the range of 75 to 100%

(6) Current Data Rate

Current Data RateCurrent Data Rate

Current Data Rate

This indicates current throughputs on both directions.

(7) Total Byte Received

Total Byte ReceivedTotal Byte Received

Total Byte Received

Total Byte Received indicates the total number of bytes received from the access point

since the communication link is established.

(8) Total Byte Sent

Total Byte SentTotal Byte Sent

Total Byte Sent

Total Byte Sent indicates the total number of bytes transmitted to the access point since

the communication link is established.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 28 -

Setup Pane

[Setup] pane can be displayed in the main dialog window by clicking the [Setup] tab. This pane

controls enabling/disabling to show each indicator on the [Link Info] pane.

The following descriptions are about each item on the pane.

(1) Selecting [ON] enables the corresponding indicator on the Link Info pane.

All are [ON] as the default.

(2) Selecting [OFF] disables the corresponding indicator on the Link Info pane.

(3) [Apply] button activates every setting above.

(4) [Reset] button enables and activates all settings above.

(1)

(2)

(4)

(3)

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 29 -

About Pane

[About] pane shows the version information about software, hardware and copyrights.

The following descriptions are about each item on the pane.

(1) This shows the version number and the build date of this Utility Software.

(2) This shows the firmware version and the build date of the iBurst Terminal.

(3) This shows the hardware version and the manufactured date of the iBurst Terminal.

(1)

(2)

(3)

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 30 -

Menu Bar

It will be displayed while the iBurst Terminal utility is active.

(1) iBurst_Terminal UTL menu

The menu is used to quit the iBurst Terminal utility or to perform other operations.

(2) DisplaySetup menu

The menu is used to control enabling/disabling to show each indication on the [Link Info] pane.

The function is the same as the [Setup] pane of the dialog.

(3) Help menu

The [Help] window will appear when help menu is selected.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 31 -

Icon Display on the Dock

When the Utility Software for iBurst Terminal is running, an icon of the Utility Software will be

displayed in the task tray of the computer monitor according to communication status of the iBurst

Terminal.

The table below shows icons with status descriptions.

Icon

IconIcon

Icon

Activities on iBurst Term

Activities on iBurst TermActivities on iBurst Term

Activities on iBurst Terminal

inalinal

inal

iBurst Terminal is not connected with your PC.

iBurst Terminal is connected with your PC, but No Signal received.

iBurst Terminal is connected with your PC,and Signal Strength is Poor.

iBurst Terminal is connected with your PC,and Signal Strength is Fair.

iBurst Terminal is connected with your PC,and Signal Strength is Good.

iBurst Terminal is connected with your PC,and Signal Strength is

Excellent.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 32 -

Chapter 4

Chapter 4Chapter 4

Chapter 4

Uninstallation

UninstallationUninstallation

Uninstallation

This chapter describes how to uninstall

This chapter describes how to uninstall This chapter describes how to uninstall

This chapter describes how to uninstall iBurst software

iBurst softwareiBurst software

iBurst software.

..

.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 33 -

Uninstallat

UninstallatUninstallat

Uninstallation for

ion for ion for

ion for Mac OS X

Mac OS X Mac OS X

Mac OS X

NOTE: All screen copies in this section are captured on Mac OS X 10.4.

1. Close all programs that are currently running.

2. Disconnect the iBurst Terminal with your PC.

3. Open the folder [Applications/iBurst Terminal/Uninstall], then double click the script file

[uninst_iburst_terminal.command].

4. The terminal window shown below will appear. Type administrator’s [password] and press

[Enter] key.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 34 -

5. Press [y] or [n] key, and Press [Enter] key.

6. Press [y] and [Enter] key to restart your computer.

ATTENTION

:

::

:

Don’t change any properties of MAC Terminal while

uninstallation. Otherwise you would have a problem on uninstalling of

iBurst Terminal software.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 35 -

Ap

ApAp

Appendix

pendixpendix

pendix

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 36 -

Maximum

Maximum Maximum

Maximum data r

data rdata r

data rate on Mac

ate on Mac ate on Mac

ate on Mac

iBurst Terminal would not perform maximum data rate when it connects with Mac PC.

This is obviously caused by Mac OS.

And typical data rate connecting with Mac is 800Kbps at downlink and 240Kbps at uplink.

FCC Compliance Statement

FCC Compliance Statement FCC Compliance Statement

FCC Compliance Statement

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

▬

Reorient or relocate the receiving antenna.

▬

Increase the separation between the equipment and receiver.

▬

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

▬

Consult the dealer or an experienced radio/TV technician for help.

CAUTION

This equipment has been tested for compliance with FCC RF exposure limits in the laptop

computer(s) configurations with a USB port and can be used in laptop computers with

substantially similar physical dimensions, construction, and electrical and RF characteristics.

And also this equipment has been tested with original antenna.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE006 Rev.1.00 Oct.28.2008

- 37 -

Note

If this equipment is intended for use in any other portable device, you are responsible for

separate approval to satisfy the SAR requirements of Part 2.1093 of FCC rules.

FCC RF Radiation Exposure Statement

FCC RF Radiation Exposure StatementFCC RF Radiation Exposure Statement

FCC RF Radiation Exposure Statement

This transmitter must not be co-located or operated in conjunction with any other antenna or

transmitter.

The available scientific evidence does not show that any health problems are associated with using

low power wireless devices. There is no proof, however, that these low power wireless devices are

absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the

microwave range while being used. Whereas high levels of RF can produce health effects (by

heating tissue), exposure to low-level RF that does not produce heating effects causes no known

adverse health effects. Many studies of low-level RF exposures have not found any biological

effects. Some studies have suggested that some biological effects might occur, but such findings

have not been confirmed by additional research.UTU03-1890F-US-A has been tested and found to

comply with FCC radiation exposure limits set forth for an uncontrolled equipment and meets the

FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65.

[The end of this manual]

Kyocera IUU19AC iBurst User Terminal User Manual Manual 1

Kyocera Corporation iBurst User Terminal Manual 1

Contents

Manual 1

Navigation menu

Namespaces

Views

Navigation