Kyocera K009 CDMA Phone User Manual Operating Instructions

Kyocera Corporation CDMA Phone Operating Instructions

Contents

User Manual

Operating Instructions   Name & Function of Parts     17 TV key  1 Earpiece  18  Built-in antenna (for Bluetooth)   2 Main Display  19  Built-in antenna (Sub antenna)   3 Optical sensor 20 LED Display  4 OK key 21 Illumination 5  Address book key 22 Infrared port  6 Mail key 23 Speaker  7  Clear /News key   24 Battery pack/cover  8 Answer/Pair key 25 FeliCa mark  9 Number keys 26 Camera lens 10  Self Menu key 27  Flash/Camera start indicator   11 Microphone  28 Charging terminals 12  Built-in antenna (Main antenna) 29 Manner key 13 Cursor key  30  External connection jack/cover 14 Application key 31 Strap hole 15 EZ key  16 Power/End key - 1 -
■ Power saving during standby In order to minimize the power consumption, the K009 display turns automatically to power saving mode when key operation is stopped for a while. The indication restores with key operation.  ■akey In this manual, the point at which to press the akey is indicated as shown below. Example) Press uor d→j   Getting Ready to Make a Call  1. Charging with the AC Adapter   The battery charger can be charged by directly inserting the AC Adapter connector into the external connection terminal on the K009 Main Unit.  2. Turning the power on Press and hold Nor more than one second.  ◆Turning the power off Press and hold Ffor more than one second.   Switch to English  1. Press con the standby screen. 2. Select "機能設定" and pressc (選択). 3. Press 35. 4. Select "English" and press c (Set).   Displaying your own phone number  1. Press con the standby screen. 2. Press 0 to display your au telephone number.   Making a Call  1. Enter the phone number you want to call on the standby screen. Area code - Local code - Subscriber's number. <Example> 03-0001-XXXX Always include the area code, even when calling to a number in the same area you are in. If you enter a wrong number: ● Press C briefly - the last dialed digit will be deleted. ●  Press and hold C - the entire phone number will be deleted. 2. Press N to make a call.     - 2 -
Making an International Call  1. Enter the phone number you want to call using the following pattern on the standby screen. International dial code - Country code - Area code - Subscriber's number 2. Press N to make a call. <Example> to call United States, number 212-123-XXXX in the USA.   Operation  Explanation 1  Pressing "005345"  Access code 2  Pressing "1"  Country code of United States: 1 3 Pressing "212"  Area code  ※ : 212 4 Pressing "123-XXXX"  Subscriber's number: 123-XXXX 5  Press N The following operation is the same as the normal telephone operation. ※  When the first number of the area code is "0", press the area code number without "0".   Adjusting the receiver volume  1. During a call, press j. u: Volume level raised.  d: Volume level lowered.   Answering a call  1. The ringer tone sounds/vibrator buzzes, and the incoming call lamp flashes. 2. Press N to answer the call. An incoming call can also be answered by pressing any of the 0~9,* ,# ,L,R,s keys. If you do not answer the call or the caller disconnects before the call is answered, "   Missed Call X" will be displayed. (A number appears in the "X".)   Entering characters  This is the method of entering names for registering address book and writing mail. 1. Press & (Char.Type). 2. Select the entry mode you want.  漢字 "Kanji", "Hiragana" entry mode (full size)  1234  "Number" entry mode (half size) カナ "Katakana" entry mode (full size)   "Pictographs" entry mode  カタカナ "Katakana" entry mode (half size)  Sym  "Symbol" entry mode AB・ab  "Alphanumeric" entry mode (full size)  Face  "Face marks" entry mode 12 "Number" entry mode (full size)   ABCD・abcd  "Alphanumeric" entry mode (half size) - 3 -
[Assignment of characters and key functions] Characters are assigned to each key as shown below. Press a key repeatedly to cycle through characters assigned to that key.  Entry mode key Kanji・Hiragana 漢字 Katakana カナ・カタカナ Alphanumeric AB・ABCD Alphanumeric ab・abcd Number 12・1234 1 あいうえおぁぃぅぇぉ  アイウエオァィゥェォ  . @ - _ / :  ~  1  . @ - _ / :  ~  1  1 2 かきくけこ  カキクケコ  ABC2  abc2  2 3 さしすせそ  サシスセソ  DEF3  def3  3 4 たちつてとっ  タチツテトッ  GHI4  ghi4  4 5 なにぬねの  ナニヌネノ  JKL5  jkl5  5 6 はひふへほ  ハヒフヘホ  MNO6  mno6  6 7 まみむめも  マミムメモ  PQRS7  pqrs7  7 8 やゆよゃゅょ  ヤユヨャュョ  TUV8  tuv8  8 9 らりるれろ  ラリルレロ  WXYZ9  wxyz9  9 [カナ]ワヲンヮ、。ー-・.!?(space)0  [AB] [ab] 0(space)! ? ・ , ’ ”_ .- 0 わをんゎ、。-・~!?(space)  [カタカナ]  ワヲン、。ー-・.!?(space)0 [ABCD] [abcd] 0(space)  ! " #$%& ' ( )* + , - . / : ; <=>?@[¥]^_` { | } ~ 0 (before confirm)゛  (Voiced Sound symbol)           ゜(Semi-voiced Sound symbol)         Switches lowercase/uppercase(before confirm) Switches lowercase/uppercase * (after confirm)  、。-・~!?(スペース) (after confirm) .  ,  -  !  ? . (before confirm)Reverse toggle of entered characters # (after confirm)line change    line change Remarks: ■ “~”can be inputted only when inputting full-sized characters. It changes to“~”when inputting half-sized characters.   ■ It is not likely to be able to change line on the input of part of character screen. ■ Inputting voiced sound symbol/semi-voiced sound symbol or switching uppercase/lowercase can be done by pressing #after inputting the character. (A list of Pictographs, Face marks, and Characters is displayed if you press it after the inputted character is set.) < Example >つ→っ→づ→つ  ハ→バ→パ→ハ  a→A→a                  - 4 -
Registering in the Address Book  You can register frequently used phone numbers and E-mail addresses. Up to 1000 addresses can be registered in the address book.  ■  Registering in the address book 1. Press and hold & for more than one second on the standby screen. The screen to register a contact is displayed.  2. Enter the item you want. Select the icon of the item you want by jand press c (Select) to enter it. As for the items you can enter, see "Items to register in the address book".  3. Press % (Reg) .  ■  Items to register in the address book The following data can be put in the address book.    Name  Up to 12 full size (24 half size) characters.  Reading  Up to 24 half size characters. Registered automatically after "Name" is entered.  Phone No.1~3 Up to 32 digits. Selecting from 7 Phone number types.  E-mail Address 1~3  Up to 64 half size alphanumeric characters. Selecting from 6 E-mail address types.  Group  You can classify it into 20 classes for managing.  Image  An image stored in the data folder is selected.  Call Img Dsp  You can set the display of the registered image. Basic   Obtain GPS Info Up to 66 byte.  Incoming Call  Setting the action (ringer, lamp) for voice call reception.  E-Mail Receive  Setting the action (ringer, lamp, ring time) for E-mail reception.  C-Mail Receive  Setting the action (ringer, lamp, ring time) for C-mail reception. Set  Secret Setup  Setting not to display the content of the address book.    Blood Type  Selecting from 4 blood types and  “No Settings”.  Birthday  Inputting date of birth.  Star Sign  Selecting from 13 constellations and  “No Settings”.  Address  Up to 40 full size (80 half size) characters. Other  Memo  Up to 40 full size (80 half size) characters.           - 5 -
Calling from the Address Book  Saved phone number in the Address Book can be loaded and a call is placed to that number. 1. Press L on the standby screen. 2. Use a to scroll through and display the name you want. 3. Press N.   Creating and Sending E-Mail  1. Press L on the standby screen. 2. Use a to select  “Create New”and press c. Icons  :  ”Address”to which you send E-Mail   :  ”Attachment”of E-Mail  :  ”Text”which is the mail contents. :  ”Subject”of E-Mail  3. Use j to select  “  [Address] ” and press c (Select). 4. Press c (Select). 5. Use j to select  “Direct Input” and press c ( Select). 6. Enter the address and press c (OK). 7. Press L (OK). 8. Use j to select  “  [Subject] ” and press c (Select). 7. Enter the subject and press c (OK). 8. Use j to select  “  [Text] ” and press c (Select). 9. Enter the body sentences and press c (OK). 10. Press L (Send).   Reading Received C-Mail  ■  When you receive C-Mail The message  “  [C-Mail] #  ”  appears when receive new C-Mail. The received C-Mail is stored in the Inbox. 1. Use j to select  “  [C-Mail] # ” and press c (OK) .  Received C-Mail is displayed.  ■  Reading C-Mail from the Inbox C-Mail can be read from the Standby Screen when any now-read mail read again. 1. Press and hold L for more than one second on the standby screen. 2. Use j to select“ Inbox” and press c (Select) .   3. Use j to select the folder including the C-Mail to read and press c (Select). 4. Use j to select the C-Mail to read and press c (View).        - 6 -
Using the EZweb Service  1. Press R on the standby screen. 2. Select "Top Menu/Search" and press c (Select).  To access information sites (sites that provide information): Select the desired information site, and press c (Select). ■ Pressing C returns the display to the previous display. Holding down C for a longer time returns you to au one Top.  Pressing F exits EZweb. you can scroll the display up and down by pressing j.   List of Basic Setup  ■ M0 Profile Mode No.  Function  Description M0  Profile  Displaying own phone number and E-mail address  ■ M1 Time / Toll / Sub Mode No.  Function  Description M11  Inquire Tool  Inquiring the call charge M12  Call Time / Tool  Confirming the last call time and charge M121  Voice Call  Confirming about voice call M122 Voice Call(OS)  Confirming about voice call(overseas) M13  Tool Display  Displaying estimated charge after call M14  Tool Rate  Setting the multiplication of charge M15  PC Site Viewer Rate  Confirming the last charge about PC Site Viewer M16  Subscription  Connecting the site for various application  ■ M2 Sound/Vib/Lamp Mode No.  Function  Description M21  Incoming Setup  Setting for reception M211  Incoming Call  Setting for voice call reception M212  E-Mail Receive  Setting for E-mail reception M213  Unreg E-Mail    Setting for unreg E-Mail reception M214 Message Receive  Setting for message reception M215  C-mail Receive  Setting for C-mail reception M216  NewsFlash Receive  Setting for NewsFlash reception M22  Machi-Uta Setup  Setting for Machi-Uta M23  Operation Tone  Setting for operation tone M231  Keypad Tone  Setting key-in confirm tone volume M232  OK Tone  Setting OK tone volume M233 NG Tone  Setting NG tone volume M234 Opening Tone  Setting sound/ volume of opening tone M235 Closing Tone  Setting sound/ volume of closing tone M236 RechargeStartTn  Setting recharge start tone volume M237 RechargeComp.Tn  Setting recharge complete tone volume M238 Wake-Up Tone  Setting wake-up tone M239 Power OFF Tone  Setting power OFF M24  Earphone Setup  Setting for earphone M241  Earphone Type  Setting of kind of earphone M242  Sound Output  Setting at output destination of earphone M243  Auto Answer  Setting for answering calls automatically M25  Vib/Lamp Setup  Setting for various Vibration/lamp M251 Talking Lamp  Setting for lamp while talking M252 Information Lamp  Setting for Information lamp M253 E/C-mail Send Lamp Setting for Mail Send lamp M254 Event Lamp  Setting for Event lamp M255 Birthday Lamp  Setting for Birthday lamp M256 E/C-mail Send Vib  Setting for Mail Send Vibration - 7 -
■ M3 Screen Display Mode No.  Function  Description M31 Display  Setting display  M311  Standby Screen  Setting image to display on standby screen  M312  Information Setup  Setting information to display on standby screen  M313  Mail Sendg Scrn  Setting image to display while sending mail  M314  Mail Rcvg Scrn  Setting image to display while receiving mail  M315  EZ Connect Scrn  Setting image to display while connecting to EZweb M32  LED Display  Setting LED Display  M321  Close Anim. Disp.  Setting close animation display  M322  Caller’s Info Disp  Setting caller’s information display M33  Disp. Lighting  Setting lighting of display and keys  M331  Display Light  Setting lighting of display  M332  Key Light  Setting lighting of keys  M333  Recharging Display  Setting lighting of recharging display M34  Font Size  Setting character size  M341 Input Size  Setting character size for input  M342 Mail Display  Setting character size for mail display  M343 EZweb Display  Setting character size for EZweb display  M344 Address Book  Setting character size for address book  M345 History  Setting character size for history  M346 Phone No.  Setting character size for phone number M35 Font  Setting font of display  M351  Data Folder  Setting font from data folder  M352  Download  Setting font downloaded from EZweb   M353  Back to Default  Backing to default font M36 Transition Effect  Setting transition effects in replacing screen M37  Set Language  Setting the English/Japanese display  ■ M4 Privacy/Rstr Mode No.  Function  Description M41 Security Lock  Locked setting M411  Auto Lock  Setting auto lock M412  FeliCa Lock  Setting FeliCa lock M413  AddresBookLock  Setting addres book lock M414  Rem. Ctrl Lock  Setting remote auto lock M415  Open/Close Lock  Setting Open/Close lock M42  User Restrict  Restricted user’s setting M421  Dial Restrict  Disabling dial-up calls M422  EZweb Restrict  Restricting EZweb access M423  PCSiteViewerRstr  Restricting the start of PC Site Viewer M424  Mail Restrict  Restricting mail access M425  EZapps Restrict  Restricting EZappli access M426  Media Tuner Rstr  Restricting Media Tuner M427  Secret Mode  Setting Secret M43  Incoming Reject  Rejecting designated unwanted phone numbers M431  Specified No.  Rejecting Incoming form specified numbers M432  ID Unset  Rejecting Incoming form ID Unset M433  Payphone  Rejecting Incoming form payphone M434  Not Support  Rejecting Incoming form Not Support M435  Unreg Adrs Bk  Rejecting Incoming form numbers not registered in Address Book M436  Reject All  Rejecting all Incoming calls while roaming abroad M437  Save Incm History  Set whether to save or not to save in incoming history M44  Change Lock No.  Changing lock number M45 Reset  Various resets M451  Learning Reset  Initializing the character memory M452  Function Reset  Initializing all functions M453  Memory Reset  Initializing all memories M454  EZapps Reset  Initializing the EZapplis M455  All Reset  Initializing all functions and memories M46 Caller ID  Announcing your number to the other party M47  PIN Code Setup  PIN code setting M471  Change PIN Code  Changing PIN code M472  Need/No Setup  Setting whether to input PIN code when powered ON or using au certificate M48  Cert. Setup  Certificate setting - 8 -
M481  Cert. Disp  Displaying downloaded certificate in detail M482  Confirm Disp  Setting whether to display check screen when sending certificate M483  Root CA  Setting to display Root Certificate M49  Emer. Position  On emergency call, location information notified to emergency can be viewed M40  Incoming Display  Setting to display while incoming call  ■ M5 User Support Mode No.  Function  Description M51  Input    Setting for the character input M511  User Dictionary  Registering words in the list M512  Edit Phrase  Editing phrases M513  Edit Face Mark  Editing Emoticon M514  Input Setup  Setting for the input prediction M515  D/L Dictionary  Registering the dictionary downloaded from EZweb M516  Choice Palette  Registering or Editing often used symbols and pictograms M517  Write Now Setup  Setting for Write Now M52  Network    Setting for network service M521  Play Voice Mail  Listening to messages M522  Voice Mail1 ON  Setting the answering message service 1 M523  Voice Mail2 ON  Setting the answering message service 2 M524  Voice Mail OFF  Stopping the answering message service M525  Change Ans. Msg  Recording/Confirming/Changing response messages M526  Eng. Guidance  Switching to English language guidance M527  Jpn. Guidance  Switching to Japanese language guidance M528  Call Waiting ON  Setting call waiting service M529  Call Waiting OFF  Stopping call waiting service M53  Notice Screen  Setting Notice Screen M54 Clock  Setting autonomous working M541  Auto Time Adj  Setting auto time set M542  Auto Power On  Setting auto power ON M543  Auto Power Off  Setting auto power OFF M55  No.Append Setup  Registering prefix or area code memory M56  Comm/USB  Exchanging dada connecting phone to PC M561  Conn. Environment  Checking connection M562  au FemtoCell  Setting and Search for au FemtoCell on M563 Ext.Mem.TransMd  Exchanging microSD data with external device M564  USB Setup  Setting operation when connecting USB cable M565  USB Charge  Setting for USB charge M566  Emission OFF  Setting Emission OFF M57  Maintenance  Updating software or checking for failure in the phone M571  Software Update  Beginning to update M572  Check Menu  Checking for failure in the phone M573 StatsDataSending  Setting status data sending of au phone M574  Area Quality  Setting whether to send out area quality info at connection error M58  Customize Key  Setting functions which can be started by Customize Key M581  TV Key Setup  Setting press the TV key M582  Side Key Setup    Setting press & hold the side key when closed on standby screen M59 BlogUp/Tweet  Setting BlogUp/Tweet M591  BlogUp  Setting E-mail address to BlogUp   M592  Tweet    Setting E-mail address to Tweet M50  Open & Anser  Setting for Open & Anser  ■  Mode setup (M6) Mode No.  Function  Description M6  Teens Mode  Setting teens mode   ■  Guide Function (M#) Mode No.  Function  Description M#  Guide Function  Displaying the operation instructions for functions other than M functions M#1  Operation Guide  Displaying the operation instructions for functions M#2  Top Icon Guide  Displaying explanation of top icon on screen M#3  au Online Manual  Connecting to EZweb au Online Manual and check the operations  - 9 -
Specifications  Weight:  approximately XX g (including battery pack) Continuous talk time:  approximately XX minutes  ★ Continuous standby time:  approximately XX hours  ★ Dimensions (H/W/D):  approximately XX mm x XX mm x XX mm  ※ ※  The height and depth are the dimensions when the telephone is folded. ★Used Japan  ●The continuous talk time and continuous standby time are the average values of when the signals can be received normally while the telephone is in the standstill status. The operation time may be reduced to utmost half due to charging conditions, temperature, and other operation environment conditions, signal condition at the location of use, function setting, roaming area.    FCC Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help and for additional suggestions. Warning The user is cautioned that changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.     FCC RF EXPOSURE INFORMATION Warning! Read this information before using your phone.   In August 1996, the Federal Communications Commission (FCC) of the United States, with its action in Report and Order FCC 96-326, adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. Body-worn Operation This device was tested for typical body-worn operations with the back of the phone kept 0.59 inches (1.5 cm) from the body. To comply with FCC RF exposure requirements, a minimum separation distance of 0.59 inches (1.5 cm) must be maintained between the user’s body and the back of the phone, including the antenna. All beltclips, holsters and similar accessories used by this device must not contain any metallic components. Body-worn accessories that do not meet these requirements may - 10 -
- 11 - not comply with FCC RF exposure limits and should be avoided. Turn off your phone before flying You should turn off your phone when boarding any aircraft. To prevent possible interference with aircraft systems, U.S. Federal Aviation Administration (FAA) regulations require you to have permission from a crew member to use your phone while the plane is on the ground. To prevent any risk of interference, FCC regulations prohibit using your phone while the plane is in the air.

Navigation menu