Kyocera KWC-K3801 Dual Band CDMA Mobile Phone with Bluetooth User Manual 82 N0247 1EN
Kyocera Communications, Inc Dual Band CDMA Mobile Phone with Bluetooth 82 N0247 1EN
Kyocera >
Contents
- 1. Users Manual
- 2. Manual
Users Manual
User Guide 1
2
E1100 User Guide
This manual is based on the production version of
the Kyocera E1100 phone. Software changes may
have occurred after this printing. Kyocera reserves
the right to make changes in technical and product
specifications without prior notice. The products
and equipment described in this documentation
are manufactured under license from QUALCOMM
Incorporated under one or more of the following
U.S. patents:
4,901,307 5,109,390 5,267,262 5,416,797
5,506,865
5,544,196 5,657,420 5,101,501 5,267,261
5,414,796
5,504,773 5,535,239 5,600,754 5,778,338
5,228,054
5,337,338 5,710,784 5,056,109 5,568,483
5,659,569
5,490,165 5,511,073
The Kyocera Wireless Corp. (“KWC”) products
described in this manual may include copyrighted
KWC and third party software stored in
semiconductor memories or other media. Laws in
the United States and other countries preserve for
KWC and third party software providers certain
exclusive rights for copyrighted software, such as
the exclusive rights to distribute or reproduce the
copyrighted software. Accordingly, any copyrighted
software contained in the KWC products may not
be modified, reverse engineered, distributed or
reproduced in any manner not permitted by law.
Furthermore, the purchase of the KWC products
shall not be deemed to grant—either directly or by
implication, estoppel, or otherwise—any license
under the copyrights, patents, or patent
applications of KWC or any third party software
provider, except for the normal, non-exclusive
royalty-free license to use that arises by operation
of law in the sale of a product.
Kyocera is a registered trademark of Kyocera
Corporation. Brick Attack and Race 21 are
trademarks of Kyocera Wireless Corp.
QUALCOMM is a registered trademark of
QUALCOMM Incorporated.
Openwave is a trademark of Openwave Systems
Incorporated. eZiText is a registered trademark of
Zi Corporation. TransFlash is a trademark of
SanDisk Corporation. Bluetooth trademarks are
owned by Bluetooth SIG, Inc. and used by Kyocera
Wireless Corp. under license.
All other trademarks are the property of their
respective owners.
Copyright © 2008 Kyocera Wireless Corp. All
rights reserved. Ringer Tones Copyright ©
2000-2008 Kyocera Wireless Corp.
82-N0247-1EN, Rev. 001-DRAFT
FCC Notice
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation. To maintain
compliance with FCC RF exposure guidelines, if
you wear a handset on your body, use the Kyocera
Wireless Corp. (KWC) supplied and approved
accessory designed for this product. Using
accessories that are not supplied or approved by
KWC may violate FCC RF exposure guidelines.
Other accessories used with this device for
body-worn operations must not contain any
metallic components and must provide at least 15
mm separation distance including the antenna and
the user’s body.
THIS MODEL PHONE MEETS THE
GOVERNMENT’S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
User Guide 3
Your wireless phone is a radio transmitter and
receiver. It is designed and manufactured to not
exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal
Communications Commission of the U.S.
Government. These limits are part of
comprehensive guidelines and establish permitted
levels of RF energy for the general population. The
guidelines are based on standards that were
developed by independent scientific organizations
through periodic and thorough evaluation of
scientific studies. The standards include a
substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit
set by the FCC is 1.6 W/kg.*
Tests for SAR are conducted using standard
operating positions specified by the FCC with the
phone transmitting at its highest certified power
level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the
network. In general, the closer you are to a
wireless base station antenna, the lower the power
output.
Before a phone model is available for sale to the
public, it must be tested and certified by the FCC
that it does not exceed the limit established by the
government-adopted requirement for safe
exposure. The tests are performed in positions and
locations (e.g., at the ear and worn on the body) as
required by the FCC for each model.
Body-worn measurements differ among phone
models, depending upon availability of accessories
and FCC requirements. While there may be
differences between the SAR levels of various
phones and at various positions, they all meet the
government requirement for safe exposure.
The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF
emission guidelines. SAR information on this
model phone is on file with the FCC and can be
found under the Display Grant section
www.fcc.gov/oet/ea after searching on the FCC
ID: OVFKWC-K3801 (dual band) or
OVFKWC-K3802 (tri-band).
Additional information on SAR can be found on the
Cellular Telecommunications and Internet
Association (CTIA) web-site at
www.wow-com.com.
* In the United States and Canada, the SAR limit
for mobile phones used by the public is 1.6
watts/kg (W/kg) averaged over one gram of tissue.
The standard incorporates a substantial margin of
safety to give additional protection for the public
and to account for any variations in measurements.
Bluetooth® Certification
For information about E1100 Bluetooth
Certification, visit the Bluetooth Qualification
Program Web site at qualweb.bluetooth.org.
Caution
The user is cautioned that changes or
modifications not expressly approved by the party
responsible for compliance could void the warranty
and user’s authority to operate the equipment.
Optimize your phone’s performance
Use the guidelines in this user guide to learn how
to optimize the performance and life of your phone
and battery.
Air Bags
If you have an air bag, DO NOT place installed or
portable phone equipment or other objects over
the air bag or in the air bag deployment area. If
4
equipment is not properly installed, you and your
passengers risk serious injury.
Medical devices
Pacemakers—Warning to pacemaker wearers:
Wireless phones, when in the ‘on’ position, have
been shown to interfere with pacemakers. The
phone should be kept at least six (6) inches away
from the pacemaker to reduce risk.
The Health Industry Manufacturers Association
and the wireless technology research community
recommend that you follow these guidelines to
minimize the potential for interference.
• Always keep the phone at least six inches (15
centimeters) away from your pacemaker when
the phone is turned on.
• Do not carry your phone near your heart.
• Use the ear opposite the pacemaker.
• If you have any reason to suspect that
interference is taking place, turn off your phone
immediately.
Hearing aids—Some digital wireless phones may
interfere with hearing aids. In the event of such
interference, you may want to consult your service
provider or call the customer service line to discuss
alternatives.
Other medical devices—If you use any other
personal medical device, consult the manufacturer
of the device to determine if it is adequately
shielded from external RF energy. Your physician
may be able to help you obtain this information.
In health care facilities—Turn your phone off in
health care facilities when instructed. Hospitals
and health care facilities may be using equipment
that is sensitive to external RF energy.
Potentially unsafe areas
Posted facilities—Turn your phone off in any
facility when posted notices require you to do so.
Vehicles—RF signals may affect improperly
installed or inadequately shielded electronic
systems in motor vehicles. Check with the
manufacturer of the device to determine if it is
adequately shielded from external RF energy.
Blasting areas—Turn off your phone where
blasting is in progress. Observe restrictions, and
follow any regulations or rules.
Potentially explosive atmospheres—Turn off
your phone when you are in any area with a
potentially explosive atmosphere. Obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire, resulting in bodily injury or
death. Areas with a potentially explosive
atmosphere are often, but not always, clearly
marked.
They include:
• fueling areas such as gas stations
• below deck on boats
• transfer or storage facilities for fuel or
chemicals
• vehicles using liquefied petroleum gas, such as
propane or butane
• any other area where you would normally be
advised to turn off your vehicle engine
Use with care
Use only in normal position (to ear). Avoid
dropping, hitting, bending, or sitting on the phone.
Avoid magnetic environments
Keep the phone away from magnets which can
cause improper functioning of the phone.
Keep phone dry
Keep phone dry. Damage can result if the phone
gets wet. Water damage is not covered under
warranty.
User Guide 5
Resetting the phone
If the screen seems frozen and the keypad does
not respond to keypresses, reset the phone by
completing the following steps:
1. Remove the battery door.
2. Remove and replace the battery.
If the problem persists, return the phone to the
dealer for service.
Accessories
Use only Kyocera-approved accessories with
Kyocera phones. Use of any unauthorized
accessories may be dangerous and will invalidate
the phone warranty if said accessories cause
damage or a defect to the phone.
Radio Frequency (RF) energy
Your telephone is a radio transmitter and receiver.
When it is on, it receives and sends out RF energy.
Your service provider’s network controls the power
of the RF signal. This power level can range from
0.006 to 0.6 watts.
In August 1996, the U.S. Federal Communications
Commission (FCC) adopted RF exposure
guidelines with safety levels for hand-held wireless
phones. These guidelines are consistent with the
safety standards previously set by both U.S. and
international standards bodies in the following
reports:
• ANSI C95.1 (American National Standards
Institute, 1992)
• NCRP Report 86 (National Council on
Radiation Protection and Measurements,
1986)
• ICNIRP (International Commission on
Non-Ionizing Radiation Protection, 1996)
Your phone complies with the standards set by
these reports and the FCC guidelines.
E911 mandates
Where service is available, this handset complies
with the Phase I and Phase II E911 Mandates
issued by the FCC.
Hearing Aid Compatibility (HAC) with Mobile
Phones
Some mobile phones and hearing devices (hearing
aids and cochlear implants), when used together,
result in buzzing, humming, or whining noises
detected by the user.
Some hearing devices are more immune than
others to this interference noise, and phones also
vary in the amount of interference they generate.
The wireless telephone industry has developed
ratings for some of their mobile phones, to assist
hearing device users in finding phones that may be
compatible with their hearing devices. Not all
phones have been rated.
Phones that are rated have the rating on their box
or a label on the box. The ratings are not
guarantees and results will vary depending on the
user’s hearing device and hearing loss. If your
hearing device happens to be vulnerable to
interference, you may not be able to use a rated
phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for
your personal needs.
M-Ratings—Phones rated M3 or M4 meet FCC
requirements and are likely to generate less
interference to hearing devices than phones that
are not labeled. M4 is the better/higher of the two
ratings.
T-Ratings—Phones rated T3 or T4 meet FCC
requirements and are likely to be more usable with
a hearing device’s telecoil (“T Switch” or
“Telephone Switch”) than unrated phones. T4 is
the better/higher of the two ratings. (Note that not
all hearing devices have telecoils in them.)
6
Hearing devices may also be measured for
immunity to this type of interference. Your hearing
device manufacturer or hearing health professional
may help you choose the proper rating for your
mobile phone. The more immune your hearing aid
is, the less likely you are to experience interference
noise from mobile phones.
For more information about hearing aid
compatibility, visit the FCC's Consumer &
Governmental Affairs Bureau Web site at
www.fcc.gov/cgb/dro.
Kyocera Wireless Corp.
www.kyocera-wireless.com
To purchase accessories, visit
www.kyocera-wireless.com/store
User Guide 7
Table of Contents
1 Get Started . . . . . . . . . . . . . . . . . . . . . . . . . 9
Phone Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Attach the Lanyard . . . . . . . . . . . . . . . . . . . . . . .11
Phone Overview . . . . . . . . . . . . . . . . . . . . . . . . .11
Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Guide Conventions . . . . . . . . . . . . . . . . . . . . . . .16
2 Call Features . . . . . . . . . . . . . . . . . . . . . . 18
Power Phone Up . . . . . . . . . . . . . . . . . . . . . . . .18
Make Phone Calls. . . . . . . . . . . . . . . . . . . . . . . .18
Answer Phone Calls . . . . . . . . . . . . . . . . . . . . . .18
End Phone Calls . . . . . . . . . . . . . . . . . . . . . . . . .19
Activate Voice Dialing. . . . . . . . . . . . . . . . . . . . .19
Volume Control . . . . . . . . . . . . . . . . . . . . . . . . .19
Use Speed Dialing . . . . . . . . . . . . . . . . . . . . . . .19
Emergency Services . . . . . . . . . . . . . . . . . . . . . .20
3 Text Entry . . . . . . . . . . . . . . . . . . . . . . . . . 21
Text Entry Modes . . . . . . . . . . . . . . . . . . . . . . . .21
Text Entry Quick Reference . . . . . . . . . . . . . . . .22
4 Browser . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Launch Browser. . . . . . . . . . . . . . . . . . . . . . . . .24
Use Browser Options . . . . . . . . . . . . . . . . . . . . .24
Search for a Web Site . . . . . . . . . . . . . . . . . . . . .25
Use a Bookmark . . . . . . . . . . . . . . . . . . . . . . . .25
Check Browser Alerts. . . . . . . . . . . . . . . . . . . . .25
Set Web Prompt . . . . . . . . . . . . . . . . . . . . . . . . .26
5 Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . 27
View Contacts Directory . . . . . . . . . . . . . . . . . . .27
Add Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Customize Contacts . . . . . . . . . . . . . . . . . . . . . .28
Contact Groups . . . . . . . . . . . . . . . . . . . . . . . . .31
Search Contacts . . . . . . . . . . . . . . . . . . . . . . . . .32
Erase All Contacts. . . . . . . . . . . . . . . . . . . . . . . .33
Count Contacts. . . . . . . . . . . . . . . . . . . . . . . . . .33
6 Camera . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Take a Picture . . . . . . . . . . . . . . . . . . . . . . . . . .34
Change Camera Options. . . . . . . . . . . . . . . . . . . 34
Camera Indicators and Icons. . . . . . . . . . . . . . . 35
7 Messaging . . . . . . . . . . . . . . . . . . . . . . . .36
Text Messages . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Multimedia Messages. . . . . . . . . . . . . . . . . . . . . 38
Voicemail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Erase Messages . . . . . . . . . . . . . . . . . . . . . . . . .41
Work with Messages . . . . . . . . . . . . . . . . . . . . .42
Message Settings . . . . . . . . . . . . . . . . . . . . . . . .43
Message Groups. . . . . . . . . . . . . . . . . . . . . . . . .46
8 Recent Calls . . . . . . . . . . . . . . . . . . . . . . .48
Call Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
View Call Timers . . . . . . . . . . . . . . . . . . . . . . . . 49
View Data Counter . . . . . . . . . . . . . . . . . . . . . . .49
9 Settings. . . . . . . . . . . . . . . . . . . . . . . . . . .50
Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . .50
Create a Custom Menu . . . . . . . . . . . . . . . . . . . .51
Bluetooth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Sounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Convenience . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Voice Features . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
View Phone Information . . . . . . . . . . . . . . . . . . 66
10 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Voice Memo. . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Alarm Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Use Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . 70
Use Calculator . . . . . . . . . . . . . . . . . . . . . . . . . .70
Use Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Use Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . .71
8
Memopad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
11 BREW Apps . . . . . . . . . . . . . . . . . . . . . . . 73
How does BREW Work? . . . . . . . . . . . . . . . . . . 73
Download an Application . . . . . . . . . . . . . . . . . 73
Open an Application . . . . . . . . . . . . . . . . . . . . . 74
View Application Details . . . . . . . . . . . . . . . . . . 74
Remove an Application . . . . . . . . . . . . . . . . . . . 74
Disable an Application . . . . . . . . . . . . . . . . . . . 74
Check Available Memory. . . . . . . . . . . . . . . . . . 74
12 Media Gallery . . . . . . . . . . . . . . . . . . . . . . 75
Browse Camera Pictures . . . . . . . . . . . . . . . . . . 75
Modify a Picture . . . . . . . . . . . . . . . . . . . . . . . . 75
Browse Saved Images . . . . . . . . . . . . . . . . . . . . 76
Browse Wallpapers . . . . . . . . . . . . . . . . . . . . . . 76
Edit Wallpaper Shuffle. . . . . . . . . . . . . . . . . . . . 76
Browse Screensavers . . . . . . . . . . . . . . . . . . . . 77
Browse Caller IDs . . . . . . . . . . . . . . . . . . . . . . . 77
Browse Saved Sounds . . . . . . . . . . . . . . . . . . . . 77
Browse Ringers. . . . . . . . . . . . . . . . . . . . . . . . . 77
Edit Ringer Shuffle . . . . . . . . . . . . . . . . . . . . . . 78
Browse Voice Memos . . . . . . . . . . . . . . . . . . . . 78
Delete All Files . . . . . . . . . . . . . . . . . . . . . . . . . 79
Playback Tools . . . . . . . . . . . . . . . . . . . . . . . . . 79
13 Voice Commands. . . . . . . . . . . . . . . . . . . 80
Voice Dial List. . . . . . . . . . . . . . . . . . . . . . . . . . 80
Voice Commands . . . . . . . . . . . . . . . . . . . . . . . 80
Voice Command Settings. . . . . . . . . . . . . . . . . . 82
14 Get Help . . . . . . . . . . . . . . . . . . . . . . . . . . 83
User Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Customer Support . . . . . . . . . . . . . . . . . . . . . . . 83
Qualified Service. . . . . . . . . . . . . . . . . . . . . . . . 84
Phone Accessories . . . . . . . . . . . . . . . . . . . . . . 84
Become a Product Evaluator. . . . . . . . . . . . . . . 84
User Guide 9
1 Get Started
Phone Battery
Install the Battery
To install the battery:
1. Hold the phone face down.
2. Find notch directly above the back cover. It is
square. Use the notch to slide the cover
down. Lift the cover from the bottom to
remove.
3. Place the battery in the battery casing with
the metal contacts facing toward the bottom
of the phone. The metal contacts of the
battery must make contact with the metal
contacts of the battery casing.
4. Replace the battery door by sliding the
notches into the openings on each side of the
battery casing.
5. Snap the cover into place.
Charge the Battery
You must have at least a partial charge in the
battery to make or receive calls.
To charge the battery:
1. Connect the AC adapter to the microUSB jack
on the side of the phone.
2. Plug the adapter into a wall outlet.
The battery icon in the upper-right corner of the
screen tells you whether the phone is:
– Charging (the icon is animated)
– Partially charged
– Fully charged
10 Phone Battery
You can safely recharge the battery at any time,
even if it has a partial charge.
Warning: The battery will not charge if you use
the phone while it is connected to an AC adapter.
Note: Before removing the battery, make sure the
phone is powered off.
Battery Safety Guidelines
• Do not disassemble or open the battery.
• Do not crush, bend, deform, puncture, or
shred the battery.
• Do not attempt to insert foreign objects into
the battery.
• Do not immerse the battery or expose it to
water or other liquids. Even if a battery
appears to dry out and operate normally,
internal parts can slowly corrode and pose a
safety hazard.
• Always keep the battery between 15 °C and 25
°C (59 °F and 77 °F). Do not expose the
battery to extremes of temperature (heat or
cold), fire, or other hazards such as a cooking
surface, iron, or radiator.
• Never use any damaged battery.
• Only use the battery for its intended phone.
• Only use the battery with a qualified charger.
Use of an unqualified battery charger may
present a risk of fire, explosion, leakage, or
other hazard. If you are unsure about whether
a charger is qualified, contact customer
support.
• Do not short-circuit the battery or allow
metallic conductive objects—such as keys,
coins, or jewelry—to contact the battery’s
terminals.
• Replace the battery only with another qualified
battery. Use of an unqualified battery may
present a risk of fire, explosion, leakage, or
other hazard. If you are unsure about whether
a replacement battery is compatible, contact
customer support.
• Promptly dispose of used batteries in
accordance with local regulations and recycle
if possible. Do not dispose as household
waste.
• Supervise all battery usage by children.
• Avoid dropping the phone or battery. If the
phone or battery is dropped, especially on a
hard surface, an internal short-circuit can
occur and pose a safety hazard. If you suspect
battery damage, take it to a service center for
inspection.
• Improper battery use may result in a fire,
explosion, or other hazard.
User Guide 11
Common Causes of Battery Drain
• Playing games or using the Web.
• Taking pictures with the flash on.
• Keeping backlighting on.
• Operating in digital mode when far away from
a base station or cell site.
• Using data cables or accessories.
• Operating when no service is available, or
service is available intermittently.
• High earpiece and ringer volume settings.
• Repeating sound, vibration, or lighted alerts.
Attach the Lanyard
To attach the lanyard:
1. Hold the phone face down.
2. Find the notch directly above the back cover.
It is square. Use the notch to slide the cover
down. Lift the cover from the bottom to
remove.
3. Remove the battery. Use the notch directly
below the battery casing. It is a half circle.
4. Thread the lanyard through the upper square
notch’s hole.
5. Make sure the lanyard catches on the hook
inside the hole.
6. Insert the battery.
7. Replace the battery door cover and snap it
into place.
Phone Overview
Get to Know Your Phone
The phone is shown here in the open position.
1. Home screen.
12 Phone Overview
2. Left softkey selects items that appear on the
lower left of the display. At the home screen,
you can select Menu.
3. Navigation key scrolls through lists and text
entry fields and accesses the following
shortcuts from the home screen.
– Scroll left to launch Browser.
– Scroll right to go to Tools > Voice
Memo.
– Scroll up to create a custom menu
shortcut.
– Scroll down to go to Recent Calls > All.
4. Send key starts or answers a call. Press once
to activate voice command, twice to display
the All Calls list, and three times to redial the
last number dialed. Press and hold to
activate voice commands.
5. Speakerphone key activates the
speakerphone and answers incoming calls.
6. Keypad for entering numbers, letters, or
symbols.
7. * Shift key changes the text mode in text
entry.
8. 0 Next key cycles through word choices
during text entry.
9. Right softkey selects items that appear on
the lower left of the display. At the home
screen, you can select Contacts.
10. OK key selects a menu item or option. At the
home screen, you go to the main menu when
you press the OK key.
User Guide 13
11. End key turns the phone on and off, ends a
call or browser session, and returns you to
the home screen.
12. Back key erases characters in text entry and
returns you to the previous screen when
navigating through menus.
13. # Space key enters a space during text entry.
Press and hold to activate or deactivate Silent
mode.
The phone is shown here in the closed position.
When the phone is closed, the keys are locked to
prevent accidental key presses.
1. Camera lens.
2. Volume key raises or lowers ringer volume.
3. Camera key activates Camera mode. To
activate camera mode, press and hold the
Camera key.
4. External screen displays time, caller ID,
signal, and battery strength.
5. Lightpipe LED.
6. Jack for microUSB cable (sold separately).
7. Jack for a hands-free headset (sold
separately).
Warning: Inserting an accessory into the
incorrect jack will damage the phone.
Lightpipe LED Behavior
Your phone’s lightpipe LED displays different
patterns depending upon the alert. You can
disable the lightpipe LED, see “Set LightPipe
Behavior” on page 56.
New message One flash. If you do not
respond, your phone will flash
again to remind you.
Incoming
call
Heartbeat pulse. It will
continue until you answer the
phone or miss the call.
Missed call One flash. If you do not
respond, your phone will flash
again to remind you.
In call Wave pulse. It will continue
until the call ends.
Alarm Three flashes. It will continue
until you respond to the alert.
Scheduler Three flashes. It will continue
until you respond to the alert.
14 Phone Overview
Note: Incoming emergency calls always activate
the LED, even if you have disabled it.
Screen Icons
These icons may appear on your phone’s screen.
Bluetooth One flash. It will continue until
you respond to Bluetooth
request.
Low battery One flash. It will continue until
you charge the phone.
Charging Wave pulse. Displays when the
phone is being charged.
The phone is operating in IS95 digital
mode.
The phone is operating in IS2000 (1X)
digital mode.
The phone is receiving a signal. You can
make and receive calls. Fewer bars indicate
a weaker signal.
A call is in progress.
The phone has a standard speed data
connection.
The phone is not receiving a signal. You
cannot make or receive calls.
Content is DRM protected.
Data service is available and active on your
phone. Check with your service provider for
availability.
(blinking) The phone is sending high-speed
data.
(blinking) The phone is receiving
high-speed data.
Data service is available, but the phone is
dormant.
Bluetooth wireless technology is enabled
(On).
Bluetooth wireless technology is disabled
(Off).
The phone is roaming outside of its home
service area.
New text message.
New voice message.
New voice and text message.
New photo message.
New photo and voice message.
New photo and text message.
User Guide 15
Main Menu
The contents of the main menu are as follows:
New photo, voice and text message.
The phone is set to light up instead of ring.
The phone is set to vibrate or to vibrate and
then ring.
The speaker phone is turned on.
Position location is set to your service
provider and to emergency services.
Position location is set to emergency
services only.
The phone is in camera mode.
The phone is set to auto answer.
The phone is in privacy mode or is
accessing a secure Web site.
The alarm clock is set.
The battery is fully charged. The more black
bars, the greater the charge.
The phone is in airplane mode.
16 Guide Conventions
Guide Conventions
In this guide, the following conventions are used
when describing phone features.
Select means to press the Left softkey, Right
softkey or OK key to select an item seen on the
display. For example, “Select Menu” tells you to
physically press the left softkey to choose Menu
from the display.
Press means to press a phone key. For example,
“Press the Send key to make a phone call” tells
you to physically press the Send key on your
phone.
Browser
Launches the Browser
Contacts
View All
Add New
Groups
Speed Dial List
Voice Dial List
Erase Contacts
Contacts Count
Camera
Launches the Camera
Messaging
New Text Msg
New Pic Msg
Voicemail
Inbox
Browser Alerts
Sent Msgs
Outbox
Saved Msgs
Drafts
Msg Settings
Message Groups
Erase Msg
Recent Calls
All
Incoming
Outgoing
Missed
Data
Erase Call List
Call Timer
Kilobyte Counter
Settings
Bluetooth
Sounds
Display
Convenience
Voice Features
Accessories
Network
Security
Phone Info
Tools
Voice Memo
Scheduler
Alarm Clock
Tip Calculator
Calculator
Timer
Stopwatch
Memopad
World Clock
BREW Apps
Mobileshop
Settings
Help
Media Gallery
Images
Sounds
Delete All
Note: The menu items on your phone can change depending on the services provided by your service provider.
Check with your service provider.
User Guide 17
Scroll means to use the Navigation key to move
though a list on the display. For example, “Scroll
through your Contacts list to choose a contact”
means to physically press the Navigation key up
or down to scroll through the list on the display.
> (greater than symbol) tells you to select an
option from a menu or list. For example, “Menu
> Settings” means to:
1. Press the left softkey to select Menu.
2. Scroll to the Settings option.
3. Press the OK key to select Settings.
18 Power Phone Up
2 Call Features
This section describes call features such as
volume, holding calls, speed dialing and other
features.
Power Phone Up
• To turn your phone on, press and hold the
End key and wait until the phone display
lights up.
• To turn your phone off, press and hold the
End key until the phone plays a musical
chime and turns off.
Make Phone Calls
Make sure you are in an area where a signal can
be received. Look for the signal strength icon on
the home screen. The more bars you see in this
symbol, the stronger the signal. If there are no
bars, move to where the signal strength is better.
When the phone has been idle for a time, it
changes to power save mode. When you see
“Power Save” on your phone’s screen, press any
key to return to normal operating mode.
There are several ways you can make a phone
call.
Call Using a Number
1. Enter a phone number.
2. Press the Send key.
Call Using a Contact
1. Select Menu > Contacts > View All to
open your contacts list.
2. Highlight a contact and press the Send key.
Call Using Voice Commands
You can use voice commands to call a contact
from your voice dial list or to dial a phone
number. For more information, see “Voice
Commands” on page 80.
Redial a Number
1. Press the Send key twice to open your call
history.
2. Highlight a phone number or contact and
press the Send key.
Note: To redial the last number called, received
or missed, press the Send key three times.
Answer Phone Calls
When a call comes in, the phone rings, vibrates,
or lights up. The phone number of the caller also
appears if it is not restricted. If the number is
stored in your Contacts directory, the contact’s
name appears. There are several ways you can
answer a phone call.
Answer Using Earpiece
Press the Send key.
User Guide 19
Answer Using Speakerphone
Press the Speakerphone key.
Answer Using Flip
You can set the phone to answer immediately
when you open the flip. This feature does not
apply to incoming data calls. For more
information, see “Enable Open to Answer” on
page 59.
End Phone Calls
To end a phone call press the End key.
Activate Voice Dialing
1. Press and hold the Send key.
2. Follow the prompts.
For more informaton, see “Voice Commands” on
page 80.
Volume Control
There are several ways to control the volume of
your phone.
Adjust Volume during a Call
To adjust the earpiece volume during a call, press
the Volume key up or down.
Use the Speakerphone
Your phone has a built-in speakerphone.
• To turn on the speakerphone, press the
Speakerphone key. The speakerphone icon
appears on the home screen when the
speakerphone is on.
• To turn off the speakerphone, press the
Speakerphone key again.
Note: If you press the Speakerphone key during
an incoming call, you will answer the call.
Silence an Incoming Call
• To silence the phone without answering the
call select Silence, press the Back key, or
press the Volume key.
• To silence the phone and answer the call,
select Silence and then press the Send key.
Note: In the absence of voicemail, this feature
drops the call.
Use Speed Dialing
Speed dialing allows you to assign a one- or
two-digit shortcut to a contact. Before you can use
speed dialing you must save a phone number as a
contact and assign a speed dial location to it. See
“Customize a Number” on page 28.
To call a contact that has a speed dial location.
1. Enter the one- or two-digit speed dial
location.
2. Press the Send key.
20 Emergency Services
Emergency Services
Call Emergency Service
You can call an emergency code, even if your
phone is locked or your account is restricted.
When you call, your phone enters Emergency
mode. This enables the emergency service
exclusive access to your phone to call you back, if
necessary. To make or receive regular calls after
dialing the code, you must exit this mode.
To place dial an emergency code:
1. Enter your 3-digit emergency code.
2. Press the Send key.
Note: Regardless of your 3-digit emergency code
(911, 111, 999, 000, etc.), your phone operates
as described.
Exit Emergency Services
When you have completed the emergency call:
1. Select Exit.
2. Select Exit again to confirm your choice.
Note: To determine who has access to your
location, see “Set Location Information” on page
64.
User Guide 21
3 Text Entry
You can enter letters, numbers, and symbols in
contacts, text messages, and your banner.
Text Entry Modes
The current text entry mode (and capitalization
setting, when applicable) are indicated by icons.
The text entry screen has the following features:
1. Characters remaining that you can type.
Allowed length of messages can vary
depending on your service.
2. Text entry fields.
3. Current capitalization setting.
4. Current text entry mode.
There are five text entry modes:
Note: The mode you start in depends on the task
you are doing. For example, when entering a
phone number, you’re in Numbers Only mode.
When entering a name for a contact, you’re in
Normal Alpha mode.
Enter Numbers
• To enter a number while in Numbers Only
mode, press a number key once.
• To enter a number while in Normal Alpha or
Rapid Entry mode, press and hold a number
key until the number appears on the screen.
Enter Words Letter by Letter
1. Press a key once for the first letter, twice for
the second letter, and so on. If your phone is
set to Spanish, French, or Portuguese,
accented letters are available.
2. Wait for the cursor to move right and enter
the next letter.
Note: To enter a space, press # Space key.
Enter Words Quickly
When you press a series of keys using Rapid Entry
mode, your phone checks its dictionary of
Case Change
Numbers Only
Normal Alpha
Rapid Entry
Add Symbol
22 Text Entry Quick Reference
common words and guesses at the word you are
trying to spell.
1. For each letter of the word you want, press
the key once. For example, to enter the word
“any” press the 2 > 6 > 9 keys.
2. If the word doesn’t match what you want,
press 0 Next key to look at other word
matches.
3. When you see the word you want, press the #
Space key.
Enter Symbols
While entering text in Normal Alpha mode, you
can enter symbols by pressing the 1 key until you
see the symbol you want. Using this method, you
have access to the following symbols:.
. @ ? ! - , & : ‘ ]
To access the full set of symbols:
1. From the text entry screen select Options >
Add Symbol.
2. Scroll up or down to view the list of symbols.
3. Press the number key corresponding to the
symbol to enter it.
Change Modes
Sometimes you need to change modes. For
example, to enter numbers in an email address
while in Normal Alpha mode, you must change to
numbers only mode, enter the numbers, and then
change back to Normal Alpha mode to complete
the address.
To change text entry modes:
• Press and hold * Shift key until the icon for
the mode you want appears at the top of the
screen.
• You can also select Options then select a
different mode.
Note: You can change the default text entry mode
when creating a text message. For more
information, see “Set Default Text” on page 45.
Change Capitalization
You can change capitalization at any time while
entering text.
Press the * Shift key to choose upper or lower
case while in Normal Alpha mode.
Text Entry Quick Reference
This table gives instructions for entering letters,
numbers, and symbols. For more information, see
“Text Entry Modes” on page 21.
User Guide 23
To.. Do this..
Enter a letter Use Normal Alpha mode and press a key until you
see the letter your want.
Enter a number Use Normal Only mode and press a key.
Enter a symbol Use Normal Alpha mode and press a key until you
see the letter your want.
Enter a space Press the # Space key.
Erase a character Press the Back key.
Erase all characters Press and hold the Back key.
Move the cursor right or left Scroll left or right.
Move the cursor up or down Scroll up or down.
Change text entry modes Press and hold the # Space key.
Capitalize any letter In Normal Alpha mode, press the * Shift key.
Choose uppercase.
Lowercase any letter In Normal Alpha mode, press the * Shift key.
Choose lowercase.
Initial caps In Normal Alpha mode, press the * Shift key.
Choose sentence case.
Select soft options on screen Press the appropriate left or right softkey.
24 Launch Browser
4 Browser
You can use your phone to browse the Internet if
you have obtained phone Internet services from
your service provider and if over-the-air Internet
access is available in your area.
Note: You cannot receive incoming calls while
you are using the browser.
Launch Browser
1. Select Menu > Browser. A message about
airtime fees appears every time you start the
browser. For more information about how
airtime is charged, contact your service
provider.
2. Select OK to continue. If this is the first time
you have connected to the Internet, a
message informs you that security is not yet
enabled for your browser.
3. Select Yes to enable security. When you are
connected, a browser home page appears. It
has a list of bookmarks and some browser
menu options at the bottom of the screen.
The lock icon appears in a secure session.
An underline and an arrow indicate that
there is more text. Scroll down to view more
text. Press the Back key to return to the
previous screen.
4. To choose a site, scroll to the link and press
the OK key.
5. When you have finished using the browser,
press the End key to exit.
Use Browser Options
You can configure your browser.
During an active browser session, select Options
and one of the following:
•Display Mode selects how the Web page is
displayed. Normal Screen configures the
content to fit on the screen. Wide Screen
does not fit the content to the screen.
•Zoom Levels allows you to zoom into a
specific area of the page. This option only
appears when the Wide Screen mode is
active.
•Map On shrinks the Web page to display the
full page on the screen. This allows you to
choose certain areas of the page to zoom into.
User Guide 25
This option only appears when the Wide
Screen mode is active.
•Forward moves to next page in your
navigation trail.
•Back moves to previous page in your
navigation trail.
•Home returns to the browser home page.
•Add to Bookmarks saves the current page
as a bookmark for easy access.
•Bookmarks opens a list of your saved
bookmarks.
•Search opens the browser search page.
•Send URL sends the URL of the current page
with a text message.
•Go to URL... allows you to enter the URL of a
new page and go there.
•Refresh reloads the current page.
•History displays the pages you have visited.
•Quit exits the browser.
•More... > Show URL displays the entire URL
of the current page.
•More... > Restart Browser relaunches the
browser.
•More... > Clear IDs and Passwords clears
the browser cache of user names and
passwords.
•More... > Certificates displays certificates
used in the current browser session.
•More... > Save Items on the Page allows
you to save content from the current page to
your phone.
•More... > Preferences allows you to change
the home page and other browser settings.
•More... > About displays information about
your browser session.
Search for a Web Site
How you search for a Web site depends on your
service provider. For more information, contact
your service provider.
Use a Bookmark
1. Select Menu > Browser.
2. Select OK to accept browser fees.
3. From your Web home page, select Options
> Bookmarks. A list of bookmarks
appears.
4. Select a bookmark.
Check Browser Alerts
Alerts received from a Web site are sent to your
Browser Alerts folder. To check them, do the
following:
1. Select Menu > Messaging > Browser
Alerts. This action launches the browser
inbox.
2. Select OK to accept browser fees.
3. Select an alert and follow the prompts.
26 Set Web Prompt
Set Web Prompt
You can set a prompt to confirm the start or exit
of the browser. See “Set Web Alerts” on page 64.
User Guide 27
5Contacts
Use your phone’s contacts directory to store
information about a person or company. Each
contact entry can have up to six phone numbers,
two email addresses, two Web addresses, two
street addresses, and a space for notes.
View Contacts Directory
To view existing contacts in your phone:
1. Select Menu > Contacts > View All. Your
contacts are listed alphabetically.
2. Highlight a contact and do one of the
following:
– Press the Send key to call the contact.
– Press the OK key view the contact’s
details.
– Select New to create a new contact.
– Select Options > Call to call the
contact.
– Select Options > Send Text Msg to
send a text message.
– Select Options > Send Pict Msg to
send a picture message.
– Select Options > View Contact to view
the contact’s details.
– Select Options > Edit Contact to edit
the contact.
– Select Options > Erase Contact to call
the contact.
– Select Options > Send as vCard to
send contact as a vCard.
– Select Options > Send All to send all
contacts to a Bluetooth device or a
connected printer.
– Select Options > Contacts Menu to
access the Contacts menu.
Add Contacts
Add Contact from Home Screen
To add a contact to your Contacts directory:
1. From the home screen, enter a phone
number to save (include the area code).
2. Select Save > Save New Contact.
3. Enter a name for the contact.
4. Enter additional phone numbers, email
addresses, Web addresses and note, if
needed. Scroll up or down to move through
the contact fields.
5. When you are done entering information,
select Save.
Add Contact from Contacts Menu
To add a contact to your Contacts directory:
1. Select Menu > Contacts > Add New.
2. Enter a name for the contact. When you are
done scroll down to the next field.
28 Customize Contacts
3. Enter a primary number for the contact.
4. Enter additional phone numbers, email
addresses, Web addresses and note, if
needed. Scroll up or down to move through
the contact fields.
5. When you are done entering information,
select Save.
Add Code or Extension
When you save the phone number of an
automated service, you may include a pause to
stop dialing. For example, a pause where you
would wait to dial an extension.
1. From the home screen, enter a phone
number.
2. Select Options and a type of pause:
–Time Pause causes the phone to stop
dialing for two seconds.
–Hard Pause causes the phone to stop
until you select Release while making
the call.
3. Enter the remaining numbers and select
Save > Save New Contact.
4. Complete the contact and select Save.
Customize Contacts
Edit Contact Details
To edit details of an existing contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, select Edit.
4. Edit or add phone numbers, email
addresses, Web addresses and notes. Scroll
up or down to move through the contact
fields.
5. When you are done entering information,
select Save.
Customize a Name
To customize the name of an existing contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll to the
name.
4. Select Options and one of the following.
–Ringer assigns a specific ringer to the
contact.
–Msg Tone assigns a specific message
tone to the contact.
–Picture assigns a specific picture to the
contact.
–Erase Contact deletes the contact. This
will erase the entire contact.
–Send as vCard sends the contact as a
vCard.
Customize a Number
To customize the number of an existing contact.
1. Select Menu > Contacts > View All.
User Guide 29
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll to a
number.
4. Select Options and one of the following.
–Call calls the contact.
–Send Text Msg sends a text message.
–Send Pict Msg sends a multimedia
message.
–Prepend displays the contact details
screen for you to change the number
(adding an area code) or other data of
the contact.
–Add Speed Dial adds the number to
your speed dial list.
–View Number displays the number.
–Erase Number deletes number from the
contact.
–Secret / Not Secret makes the number
secret. It will not appear on the screen
until the lock code is entered. Secret
numbers can be called without a lock
code.
–Primary Number makes this number
the primary number for the contact.
–Send as vCard sends the contact as a
vCard.
–Add To Group adds the number to the
business, personal or custom group.
Customize an Email Address
To customize the email address of an existing
contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll to an
email address.
4. Select Options and one of the following.
–Send Text Msg sends a text message.
–Send Pict Msg sends a multimedia
message.
–View Address displays the email
address.
–Add To Group adds the email address
to the business, personal or custom
group.
–Erase Address deletes email address
from the contact.
–Secret / Not Secret makes the email
address secret. It will not appear on the
screen until the lock code is entered.
–Send as vCard sends the contact as a
vCard.
Customize an IM Address
To customize the IM address of an existing
contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
30 Customize Contacts
3. At the contact details screen, scroll to an IM
address.
4. Select Options and one of the following.
–View IM displays the street address.
–Erase IM deletes street address from the
contact.
–Send as vCard sends the contact as a
vCard.
Customize a Web Address
To customize the Web address of an existing
contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll to a Web
address.
4. Select Options and one of the following.
–Launch Web launches the Web browser
and goes to Web address.
–Send Pict Msg sends a multimedia
message.
–View Web displays the Web address.
–Erase Web deletes Web address from
the contact.
–Send as vCard sends the contact as a
vCard.
Customize a Street Address
To customize the street address of an existing
contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll to a street
address.
4. Select Options and one of the following.
–View Address displays the street
address.
–Erase Address deletes street address
from the contact.
–Send as vCard sends the contact as a
vCard.
Customize a Note
To customize the note of an existing contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll to a note.
4. Select Options and one of the following.
–View Note displays the note.
–Erase Note deletes note from the
contact.
–Secret / Not Secret makes the note
secret. It will not appear on the screen
until the lock code is entered.
–Send as vCard sends the contact as a
vCard.
User Guide 31
Assign Ringer to a Contact
To assign a ringer to a contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll to the
name.
4. Select Options > Ringer > Assign Ringer
and a ringer from the list. Scroll to play the
ringers.
Assign Picture to a Contact
To assign a picture to a contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll to the
name and do one of the following:
– Select Options > Picture > Assign
Picture > Camera Pictures. Scroll to
an image and select Select.
– Select Options > Picture > Take
Picture Now to take a new picture.
Assign Number Type
When you assign a number type, an icon is placed
in front of the contact number to specify the type
of number it is.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, select Edit.
4. Press down twice to scroll to the number
type dropdown and press the OK key.
5. Select General, Work, Home, Mobile,
Pager or Fax. The appropriate icon will
appear next to the number in your phone
lists.
6. Select Save.
Send a vCard
To send contact information as a message:
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll to the
contact name.
4. Select Options > Send as vCard > Via
Picture Msg, Via Bluetooth, or To
Printer.
5. Complete the appropriate task to send
contact information.
Contact Groups
You can assign your contacts to groups. Your
phone comes with default groups. You can also
create your own groups.
Create a Group
1. Select Menu > Contacts > Groups.
2. Select New.
3. Enter a name for the group, then select Next.
32 Search Contacts
4. Select contacts from the list provided. A
check mark appears next to each selection
you make. You can also remove checkmarks.
5. When you have chosen your contacts, select
Done.
Your new group appears the next time you view
your groups
Use a Group
1. Select Menu > Contacts > Groups.
2. At the groups list, scroll to a group.
3. Select Options and one of the following:
–View displays the group details.
–Edit adds or removes group members.
–Erase deletes the group.
–Send Text Msg sends a text message.
–Send Pict Msg sends a multimedia
message.
–Send as vCard sends the group as a
vCard.
–Create Msg Group creates a message
group.
Customize a Group
1. Select Menu > Contacts > Groups.
2. At the groups list, select a group.
3. Select Options and one of the following:
–Ringer assigns a ringer to the group.
–Msg Tone assigns a message tone to the
group.
–Picture assigns a picture to the group.
–Erase deletes the group.
–Edit adds or removes group members.
Search Contacts
To find a phone number or contact, you can
search the contacts directory, check the Frequent
List, or use Fast Find.
Contacts Directory
To search your contacts directory:
Select Menu > Contacts and one of the
following:
•View All lists the entire contacts directory.
•Groups lists existing groups.
•Speed Dial List or Voice Dial List shows
contacts on the specified list.
To quickly get down the list, enter the first letter of
the contact. You will skip to that letter of the
alphabet.
Frequent List
With Frequent List enabled, you can see 15 of
your most frequently called contacts. See “Enable
Frequent List” on page 59.
Fast Find
With Fast Find enabled, you can press one or two
keys to view close matches of the number. See
“Enable Fast Find” on page 59.
User Guide 33
Voice Search
You can use voice commands to find a contact in
your voice dial list. For more information, see
“Find Contacts” on page 81.
Erase All Contacts
You can delete all your contacts.
Select Menu > Contacts > Erase Contacts and
one of the following:
•Contacts Only deletes all contacts from the
phone.
•Groups Only deletes groups you have
created from the phone. This does not delete
the contacts.
•Erase All deletes both contacts and groups
from the phone.
Note: Deleted information can not be recovered.
Count Contacts
Check how many contacts you have stored.
Select Menu > Contacts > Contacts Count.
34 Take a Picture
6 Camera
Your phone comes with a camera. Before using
your phone’s camera, here are some tips:
• You cannot activate the camera while on an
active call or while browsing files in the media
gallery.
• Once the camera is active, the home screen
acts as the viewfinder.
• If you get a “Low memory” error, check your
resolution and quality compression settings.
• If there is no activity within 45 seconds after
you turn your camera on, the camera quits
and returns to the previous launch point.
• Menu settings and options can only be
accessed when the camera is active.
Take a Picture
To take a picture:
1. Activate the camera one of the following
ways:
– Press and hold the Camera key.
– Select Menu > Camera.
2. Focus on the image using the phone’s display
as a viewfinder. Scroll up or down to zoom in
and out.
3. Take a picture one of the following ways:
– Press the OK key.
– Press the Camera key.
– Select Capture.
The picture is saved to your camera pictures
folder.
4. Select Send to create a multimedia message
or Erase to delete the picture from your
phone.
You can also send the picture to a Bluetooth
device or a printer.
5. Press the End key to exit camera mode.
Change Camera Options
While in camera mode you can select one of the
following:
•Options > Settings displays the following
settings you may set up prior to taking a
picture:
–Resolution adjusts the resolution.
–Self Timer sets a self timer. When set, the
camera beeps from 3 seconds down to the
time the shutter snaps the picture
automatically. Self Timer is not available
when Multishot mode is activated.
–Date/Time places a time stamp on the
picture.
–Multishot allows you to take up to six
multiple pictures while the camera key is
User Guide 35
pressed and held. A tone will play each
time a picture is taken.
–Shutter Sound sets the sound used when
the camera takes a picture.
–White Balance adjusts for different
lighting.
–Color Tone sets the color tone of the
picture.
–Picture Quality sets the picture
compression. The higher the
compression, the better the detail of the
picture (higher pixel rate). When set
higher, the picture file size is larger, using
more memory.
•Options > Brightness adjusts the brightness
of the image in the home screen LCD.
•Options > Camera Pictures displays all
pictures taken and stored.
•Options > Last Picture displays the most
recently taken picture.
•Options > Frames adds a frame or a stamp
to your picture. A frame or stamp cannot be
removed once it has been used in a picture.
The picture resolution may change while
taking pictures with frames. The resolution
returns to the original setting once Frames is
disabled.
Note: The following settings will revert to the
default setting each time you exit the camera
application: Self Timer, Multishot and Color
Tone.
Camera Indicators and Icons
The following information indicators and icons
may display on the screen when you are operating
the camera.
Numbers in the top right corner indicate the
number of snapshots remaining.
Numbers in the bottom left corner indicate
the resolution setting for pictures.
Camera is in camera mode.
Multishot feature is on.
Self timer feature is on.
Date/Time stamp is on.
36 Text Messages
7 Messaging
This chapter describes how to send, receive, and
erase messages from your phone.
Note: The features and menus described in this
chapter may vary depending on services available
in your area. Check with your service provider for
details and possible usage charges.
Text Messages
You can only send text messages to phones that
are capable of receiving them or to email
addresses.
Create a Text Message
1. Select Menu > Messaging > New Text
Msg.
2. Enter a recipient’s phone number or email
address:
– Select Options > Recent List, Recent
Calls, Contacts, or Groups to access
your stored contacts.
– Enter a new address manually.
You can message up to ten recipients at
once. Use comma or spaces to separate
addresses. If you select stored contacts, this
is done automatically. Scroll down to move to
the next field when done.
3. Enter the message.
4. Select Send.
Attach QuickText and other Extras
During text entry, you can attach items such as
prewritten text (QuickText) or symbols.
1. From the text entry screen, select Options
and one of the following:
–Insert QuickText inserts prewritten text
from a list.
–Insert Note inserts memo created with
your memopad.
–Add Symbol inserts a symbol. Press the
corresponding number to select a
symbol.
If you have enhanced messaging, you also
have the following options.
–Insert Picture inserts a picture.
–Insert Sound inserts a sound.
–Insert Contacts inserts a contact.
2. Complete your message.
3. Select Send.
Use Text Message Options
When you create a text message, you have several
options to help you.
1. From the message entry screen, select
Options and one of the following:
–Add Address allows you to add another
recipient.
User Guide 37
–Save Address saves a recipient’s
address to your phone if it is new.
–Save Message saves the messages in
your Drafts folder.
–Save QuickText saves the message you
composed as a prewritten message.
–Msg Settings > Msg Receipt alerts you
when a recipient has received your
message.
–Msg Settings > Set Priority labels the
message as urgent.
–Msg Settings > Callback Number
includes a callback number with the
message.
–Msg Settings > Send Later schedules a
time to send the message.
–Msg Settings > Validity Period sets a
defined expiration time limit for a
message.
2. After setting options, select Close your
message.
3. Complete your message.
4. Select Send.
Retrieve a Text Message
When a text message is received, your phone
displays a notification and the message icon
appears at the top of your screen. The message
icon flashes if the message is urgent. Urgent
messages are also marked in the Inbox.
Message Notifications
If you see a message notification, select Inbox to
view messages and do one of the following:
• Sroll to a message and select View to open it.
• Select Ignore clear the message notification.
Note: If you receive a new message while you are
reading a message, the one you are reading will
be replaced by the new one. The older message is
in the Inbox.
Message Icons
1. If you see the message icon, select Menu >
Messaging > Inbox.
2. Sroll to a message and select View to open it.
View a Text Message
The options available when viewing a text message
may vary. Check with your service provider.
1. Select Menu > Messaging > Inbox.
2. Select a message to view. If the message is
long, scroll down to view entire message.
3. Select Reply to create a response message
or Options and one of the following.
–Erase deletes the message.
–Forward forwards the message.
–Reply with Copy replies to the message
with a copy of the original attached.
–Save Message saves the message to the
Saved Messages folder.
–Save as QuickText saves the message
text as QuickText, which can be inserted
38 Multimedia Messages
into other messages. Graphics are not
saved.
–Sender displays the sender information.
–Lock Msg / Unlock Msg protects the
message from being accidentally deleted.
If you have received an enhanced message,
you also have the following options:
–Play / Stop plays or stops a sound.
–Save Object saves an image or sound.
–Save Contact saves a contact.
–Launch Browser launches the browser.
Note: If a graphic is too large or incorrectly
formatted and is not received with the message,
an icon appears.
Multimedia Messages
You can only send multimedia messages to
phones that are capable of receiving them or to
email addresses. Multimedia messages have a
predetermined character and file size limit. When
you reach the character and file size limit for a
single multimedia message, you must edit the
message to meet the size limitation.
Note: Multimedia messaging is not available on
all phones. Check with your service provider.
Create a Multimedia Message
1. Select Menu > Messaging > New Pic
Msg.
2. Enter a recipient’s phone number or email
address:
– Select Options > Recent List, Recent
Calls, Contacts, or Message Groups to
access your stored contacts.
– Select Options > Online Album to
send a file to a Web location.
– Enter a new address manually. Scroll
down to move to the next field when
done. Repeat the procedure for the CC
and BCC fields. You can message up to
ten recipients at once. Use comma or
spaces to separate addresses. If you
select stored contacts, this is done
automatically.
3. Enter a subject. Scroll down to move to the
next field when done.
4. Enter a message. Scroll down to move to the
next field when done.
5. Attach an image file:
– Select Options > Take a Picture to
take a photo and attach it.
– Select Options > Media Gallery to
attach an existing file.
Scroll down to move to the next field when
done.
6. Attach a sound file:
– Select Options > Record Sound to
record a sound and attach it.
– Select Options > Media Gallery to
attach an existing file.
7. Select Send.
User Guide 39
Use Multimedia Message Options
When you create a multimedia message, you have
several options to help you.
1. From the message entry screen, select
Options and one of the following:
–Remove Image removes file from the
message.
–Remove Sound removes file from the
message.
–Add New Slide adds a new slide to the
message.
–Previous Slide edits the previous slide.
–Next Slide edits the next slide.
–Erase Slide erases the current slide.
–Insert Contacts adds a contact to the
message.
–Insert QuickText adds prewritten text
to the message.
–Preview Message plays the message.
–Save as QuickText saves the message
text as QuickText, which can be inserted
into other messages. Graphics are not
saved.
–Save Message saves the message to your
Drafts folder.
–Add Address adds additional recipients
to the message.
–Save Address saves a recipient’s
address to your phone if it is new.
–Msg Settings > Msg Receipt alerts you
when a recipient has received your
message.
–Msg Settings > Set Priority labels the
message as urgent.
–Msg Settings > Send Later schedules a
time to send the message.
–Msg Settings > Slide Interval sets
how fast the message moves from slide to
slide.
2. After setting an option, press the Back key to
return to the message window if necessary.
3. Complete your message.
4. Select Send.
Retrieve a Multimedia Message
There are two modes for receiving a multimedia
message on your phone: Auto retrieve (default)
and Prompt. To control this setting, see “Enable
Auto Retrieve” on page 44.
Auto Retrieve Mode
When a message is received, it is automatically
downloaded onto your phone. A notification
appears when a new message has been
40 Multimedia Messages
downloaded to your phone. Select one of the
following:
•View opens the message.
•Later views the message at another time. It is
stored in the Inbox.
Note: If a message is received during a call, then
the phone downloads the message approximately
one minute after the last key is pressed.
Prompt Mode
When a multimedia message is received, it is not
automatically downloaded onto your phone. A
notification appears when a new message is
available for download. Select one of the
following:
•View downloads and opens the message.
•Erase deletes the message, without
downloading.
•Later downloads the message to the Inbox.
Note: If a multimedia message is received during
a call, the phone displays a notification after the
call ends.
View a Multimedia Message
When a multimedia message is received, the
message icon appears at the top of your screen.
The message icon flashes if the message is urgent.
All notifications or messages are stored in the
Inbox regardless of your auto receive settings.
1. Select Menu > Messaging > Inbox.
2. Select a message to view. If the message is
long, scroll down to view entire message.
3. Select Reply to create a response message
or Options and one of the following.
–Reply All replies to all recipients of the
message.
–Erase deletes the message.
–Recipients displays the recipients of the
message.
–Mute / Unmute silences the message.
–Forward launches the message creation
screen, allowing you to forward the
message. The original address will not be
shown, nor will the graphic, sound, and
text fields.
–Message Info displays message
information (priority, sender, subject,
time sent and received, and message
size).
–Replay plays the message again from the
beginning.
–Call initiates call to sender of message.
–Save Picture saves the currently viewed
picture embedded in the message.
–Save Sound saves the current sound
embedded in the message.
–Save Address extracts email addresses,
phone numbers, and/or URLs from the
sender information and message body.
–Save as QuickText saves the message
text as QuickText, which can be inserted
User Guide 41
into other messages. Graphics are not
saved.
–Save Message saves the message to the
Saved Messages folder.
–Lock Msg / Unlock Msg protects the
message from being accidentally deleted.
If a message contains more than one slide,
the following options are also available:
–Next moves to the next slide.
–Done exits the message.
–Pause / Resume pauses or continues
the message slides.
Voicemail
Configure your Voicemail
Before your phone can receive voicemail
messages, you must set up a password and record
a personal greeting with your service provider.
When you have set up your voicemail, all
unanswered calls to your phone are automatically
transferred to voicemail, even if your phone is in
use or turned off.
1. Press and hold the 1 key.
2. Follow the system prompts to create a
password and record a greeting.
Check your Voicemail
When a voice message is received, your screen
displays a notification along with a voicemail
message icon at the top of your screen. The
symbol flashes if the message is urgent.
• If you see a notification:
a. Select Call, which initiates a call to your
voicemail number.
b. Follow the system prompts to retrieve the
message.
To clear the screen without checking
messages, select Ignore.
• If you only see the voicemail message icon:
a. Select Menu > Messaging >
Voicemail.
b. Follow the system prompts to retrieve the
message.
Note: You can set the phone to beep or vibrate
every five minutes to remind you that you have
voicemail. For more information, see “Set Alerts”
on page 43.
Erase Messages
It is a good idea to erase old messages to free up
memory in your phone. You can erase messages
and pages as you send or read them, erase them
one at a time, or erase them all at once.
Erase a Single Message
1. Select Menu > Messaging > Inbox, Sent
Msgs, Outbox, Saved Msgs or Drafts.
2. Scroll to the message you wish to erase.
3. Select Options > Erase.
42 Work with Messages
4. You will see a notification. Select Yes to
erase the message.
Note: You can erase a scheduled message, but
you cannot cancel delivery of the message.
Erase All Messages
1. Select Menu > Messaging > Erase Msg >
Inbox, Outbox, Sent Msgs, Saved Msgs,
Drafts or All.
To erase messages from all folders, select
All.
2. You will see a notification. Select Yes to
erase the messages.
Work with Messages
Here are some tips about messaging with your
phone.
Unable to Send Messages
You may not be able to send or receive messages
if your phone’s memory is nearly full, or if digital
service is not available at the time. To free up
memory, erase old messages. See “Erase
Messages” on page 41.
Appended Messages
If you go over the character limit for a single
message, the phone may automatically append an
empty segment to your message to make space.
Warning: Your service provider will charge you
for each message segment.
When you start a message, the maximum
character limit appears once you are in the
message entry field. This number counts down as
you enter characters, until it reaches 0.
If you continue to enter text after this counter
reaches 0, a message segment may be appended.
When you reach the message size limit, you are
prompted to edit the message or alerted that the
message is being appended.
Note: Not available on all phones. Check with
your service provider.
Incoming Calls while Creating
Messages
If you receive a call while receiving a message you
will receive a notification. You can do the
following:
• Select Ignore to not answer the call. You will
return to the message screen.
• Press the Send key to answer the call. The
message will be saved to the Drafts folder.
Complete Messages in Drafts Folder
To continue composing a message in the Drafts
folder:
• Select Menu > Messaging > Drafts.
• Select the message your wish to complete.
• Select Edit.
• Complete your message.
• Select Send.
User Guide 43
View Sent Messages
To view messages in the Sent Messages folder:
Select Menu > Messaging > Sent Msgs.
Your list of saved messages will appear with the
following symbols
View Failed or Pending Messages
Failed or pending messages are stored in your
Outbox. To view messages in the Outbox:
Select Menu > Messaging > Outbox.
Your list of failed or pending messages will
appear with the following symbols
Message Settings
Messaging settings configure your phone for
voice, text, multimedia messages.
Set Alerts
Choose how you want be alerted of messages,
pages, and voicemail.
1. Select Menu > Messaging > Msg Settings
> Alerts > Msg Alert, Page Alert, or
Voice Alert.
2. Select an alert.
If you select an alert with an & Remind, the phone
notifies you once when a new message is received
and then notify you again every five minutes. To
stop a reminder alert, select Ignore.
The scheduled message will be sent at
the scheduled time. You cannot cancel
delivery of the message.
The message was sent. You cannot
cancel delivery of the message.
The message has been received.
The message has been sent to more
than one recipient.
The message is pending and will be sent
when possible. You can cancel delivery
of the message.
The message cannot be sent because
service is not available. An alert appears
on your phone if the message cannot be
sent.
44 Message Settings
Set Message List View
You can set how your phone displays your
message list..
Select Menu > Messaging > Msg Settings >
Msg List View and one of the following:
•Msg Preview displays first part of message.
•Sender displays who sent the message.
•Sender & Preview displays sender and first
part of message.
•Sender & Date/Time displays sender and
when message was sent.
Set Signature
The signature you create is included at the end of
all outgoing messages and is counted as
characters in your messages; however, it does not
appear in the message creation screen.
1. Select Menu > Messaging > Msg Settings
> Signature.
2. Enter your signature in the text field.
3. Select OK to save the signature.
Note: The characters in the signature are
included in the total character count of the
message.
Edit QuickText
Your phone comes with prewritten (QuickText)
messages, such as “Please call me,” which you
can insert into the body of a text message. You can
edit these messages or create new ones. Your
phone stores up to 40 QuickText messages, with
up to 100 characters per message.
1. Select Menu > Messaging > Msg Settings
> Edit QuickText and do one of the
following:
– Scroll to a QuickText message and select
Edit.
– Select New Msg to create a new
QuickText message.
2. Enter or edit the text.
3. Select Save.
Note: You can also save a message you have
written or received as QuickText.
Enable Auto Retrieve
To set your phone to auto retrieve multimedia
messages.
Select Menu > Messaging > Msg Settings >
Auto Retrieve and one of the following:
•Disabled turns off auto retrieve. You will be
prompted before any multimedia messages
are download.
•Enabled turns on auto retrieve.
User Guide 45
Enable CC/BCC Fields
To show or hide the CC and BCC fields when you
compose a multimedia message.
Select Menu > Messaging > Msg Settings >
CC and BCC and one of the following.
•Disabled hides the CC and BCC fields.
•Enabled shows the CC and BCC fields.
Set Callback Number
Set a callback number to let recipients know a
number where they can call you back.
1. Select Menu > Messaging > Msg Settings
> Callback Number.
2. Enter number in the text field.
3. Select OK to save the number.
Enable Save to Sent
You can save your outgoing messages.
Select Menu > Messaging > Msg Settings >
Save to Sent and one of the following:
•Disabled does not save outgoing messages.
•Prompt allows you to choose whether or not
to save your message when you send it.
•Enabled saves all outgoing messages to the
Sent folder.
Enable Auto-Erase
You can set your phone to erase message
automatically when memory is needed for
incoming messages.
Select Menu > Messaging > Msg Settings >
Auto-Erase and one of the following:
•Disabled erases no messages.
•Inbox Msgs erases old messages in your
Inbox when memory is needed.
•Sent Msgs erases old messages in your Sent
folder when memory is needed.
•Both erases old messages in both your Inbox
and Sent folder when memory is needed.
Set Default Text
You can change the default text entry mode when
creating a text message. This setting applies only
to the message body screen, not the “To” screen.
Select Menu > Messaging > Msg Settings >
Default Text and one of the following:
•Normal Alpha enter text in letter by letter.
•Rapid Mode enter text with word
recognition.
46 Message Groups
Request Message Receipts
Request a notification when a recipient has
received a text or multimedia message.
Select Menu > Messaging > Msg Settings >
Text Msg Receipt or Pic Msg Receipt and one
of the following:
•Don’t Request to not request a notification.
•Request to request a notification.
Set Voicemail Number
Set the number your phone calls to retrieve
voicemail. Often your voicemail number is
automatically programmed by your service
provider.
1. Select Menu > Messaging > Msg Settings
> Voicemail Number.
2. Select Edit.
3. Enter number in the text field. Use Options
> Time Pause or Hard Pause to enter
pauses
4. Select Save.
Erase Recent List
Clears recent list of message recipients from your
phone.
Select Menu > Messaging > Msg Settings >
Erase Recent List > Yes.
Request Message Read Receipts
Request a notification when a recipient has
received and read a text or multimedia message.
Select Menu > Messaging > Msg Settings >
Text Msg Read Receipt or Pic Msg Read
Receipt and one of the following:
•Don’t Request to not request a notification.
•Request to request a notification.
Message Groups
You can create groups for messaging.
Create a Group
1. Select Menu > Messaging > Message
Groups.
2. Select New.
3. Enter a name for the group, then select Next.
4. Select contacts from the list provided. A
check mark appears next to each selection
you make. You can also remove checkmarks.
5. When you have chosen your contacts, select
Done.
Use a Group
1. Select Menu > Messaging > Message
Groups.
2. At the groups list, scroll to a group.
3. Select Options and one of the following:
–View displays the group details.
–Edit adds or removes group members.
User Guide 47
–Erase deletes the group.
–Send Text Msg sends a text message.
–Send Pict Msg sends a multimedia
message.
–Send as vCard sends the group as a
vCard.
Customize a Group
1. Select Menu > Messaging > Message
Groups.
2. At the groups list, select a group.
3. Select Options and one of the following:
–Ringer assigns a ringer to the group.
–Msg Tone assigns a message tone to the
group.
–Picture assigns a picture to the group.
–Erase deletes the group.
–Edit adds or removes group members.
48 Call Lists
8 Recent Calls
Call Lists
Details on the calls you made, received, or missed
are stored in the recent call lists and are identified
by the following icons:
View Call Lists
1. Select Menu > Recent Calls and one of the
following:
–All to view all calls made or received.
–Incoming to view calls received.
–Outgoing to view calls made.
–Missed to view calls received, but not
answered.
–Data to view data calls.
2. Highlight a recent call.
3. Press the Send key to call the number or
select Options and one of the following.
–Save creates a new contact.
–View displays the contact details.
–Send Text Msg sends a text message to
the number.
–Send Picture Msg sends a multimedia
message to the number.
–Erase Record deletes the call from the
call list
Note: If the phone number is classified as
“secret,” you must enter your four-digit lock code
to view or edit it.
Deal with a Missed Call
When you have missed a call, “Missed Call”
appears on your screen. You can do one of the
following:
• To clear the screen, select OK.
• To view the call details, select Calls and press
the OK key.
• To return the call, select Calls and press the
Send key.
You can set an alert to beep every five minutes
after you have missed a call. See “Set Missed Call
Alert” on page 59.
Erase Call Lists
You can erase your phone’s call lists.
1. Select Menu > Recent Calls > Erase Call
List > All, Incoming, Outgoing, Missed,
or Data Call.
2. Select Yes.
Outgoing call
Incoming call
Missed call (flashing)
User Guide 49
View Call Timers
Select Menu > Recent Calls > Call Timer and
one of the following:
•All Calls tracks all calls you have made and
received. This timer cannot be reset.
•Recent tracks all calls you have made and
received since you last reset this timer. To
reset this timer to zero, select Reset.
•Home tracks all calls you have made and
received in your home network since you last
reset this timer. To reset this timer to zero,
select Reset.
•Roam tracks all roaming calls you have made
and received since you last reset this timer. To
reset this timer to zero, select Reset.
•Incoming tracks all incoming calls you have
received since you last reset this timer. To
reset this timer to zero, select Reset.
•Outgoing tracks all outgoing calls you have
made since you last reset this timer. To reset
this timer to zero, select Reset.
Your phone can alert with a short beep ten
seconds before each minute passes during a call.
For more information, see “Enable Minute Alert”
on page 59.
View Data Counter
Your phone tracks the kilobytes you have received
and sent during data calls.
Select Menu > Recent Calls > Kilobyte
Counter to view your data call information. To
reset this counter to zero, select Options >
Reset.
You cannot redial a data call from this list.
50 Settings Menu
9 Settings
Settings Menu
The contents of the settings menu are as follows:
Bluetooth
On/Off
My Devices
Settings
Sounds
Ringers
Ringer Mode
Volume
Flip Sounds
Pwr On/Off Sound
Keypad
Display
Set Wallpaper
Wallpaper Shuffle
Set Screensaver
Themes
Main Menu View
My Banner
Backlighting
Lightpipe Behavior
Brightness
Language
Time/Date Format
External Display
Convenience
Airplane Mode
Auto-Hyphen
1-Touch Dialing
Hold Call
Fast Find
Frequent List
Minute Alert
Missed Call Alert
Open to Answer
Any Key Answer
Voice Features
Automatic Add
Expert Mode
Display Results
Digit Lengths
Voice Answer
Voice Wake-up
Voice Training
Accessories
Headset Sounds
Auto-Answer
TTY Device
Com Port Speed
T-coil Hearing Aid
Network
Data Calls
Privacy Alert
Voice Privacy
Roam/Svc Alert
Roam Option
Set Phone Line
Location
Web Alert
Roam Call Alert
Security
Lock Phone
Limit Calls
ICE Numbers
Erase Contacts
New Lock Code
Phone Info
Build Info
Icon Key
User Guide
Note: The menu items on your phone can change depending on the services provided by your service provider.
Check with your service provider.
User Guide 51
Create a Custom Menu
1. From the mainscreen, scroll up and hold.
2. Select Edit.
3. Select features from the list provided. A
check mark appears next to each selection
you make. You can also remove checkmarks.
4. When you have chosen your menu options,
select Save.
Your new selection appears the next time you
select your custom menu.
Bluetooth
The Bluetooth® wireless technology on your
phone enables wireless connectivity with
accessories such as portable or installed
hands-free car kits, headsets, handsets,
computers, PC cards and adapters, PDAs, and
speakers.
Not available on all phones. For details check with
your service provider.
You must use a Bluetooth device (compatible with
Class 2 Bluetooth wireless technology, version
1.2) in order to use this phone wirelessly.
Bluetooth accessories are noted with a symbol.
Enable Bluetooth
You must turn on your phone’s Bluetooth feature
to use it with Bluetooth devices.
Select Menu > Settings > Bluetooth > On/Off
and one of the following:
•On Visible allows other devices to find your
phone.
•On Invisible hides your phone for all devices
except those listed in your My Devices.
•Off prohibits your phone from being used
with any Bluetooth wireless technology device.
To prolong battery life, it is recommended to
turn Bluetooth off when you are not using it.
When you turn Bluetooth on the first time, you
will be prompted to do a device search. You can
immediately pair with a device.
Bluetooth Pairing
You must first “pair” your phone with the
Bluetooth device to allow your phone to
communicate with it. Refer to the instructions
for setting up Bluetooth (below) in conjunction
with the user guide provided with your
Bluetooth device.
1. Select Menu > Settings > Bluetooth >
On/Off > On Visible or On Invisible.
2. Prepare the Bluetooth device or accessory
for pairing as described in the other device’s
user guide.
3. Select Menu > Settings > Bluetooth > My
Devices > Find New.
52 Bluetooth
4. Your phone will search and detect visible
Bluetooth devices in the vicinity.
5. At the device list, highlight a device and
select Add.
When pairing is initiated from another
Bluetooth device, you will be prompted to
accept or reject the pairing.
6. If necessary, enter the password provided in
the Bluetooth device’s user guide and select
OK.
Your phone waits for the device’s response. If the
password is accepted the device is added to your
device list.
Use Bluetooth
Before you can use the Bluetooth audio functions
of your phone, you must set your phone to be
ready to communicate with a device. This is called
“connecting.”
Connect to a Device
To connect your phone to an audio Bluetooth
device:
1. Select Menu > Settings > Bluetooth > My
Devices.
2. At the device list, highlight a device and
select Connect.
A notification appears confirming the connection.
You can now use the device with your phone.
Disconnect from a Device
To disconnect your phone from an audio
Bluetooth device:
1. Select Menu > Settings > Bluetooth > My
Devices.
2. At the device list, highlight a connected
device and select Disconnect.
Bluetooth Device Options
You can change or review the information about
each device you paired with your phone.
1. Select Menu > Settings > Bluetooth > My
Devices.
2. At the device list, highlight a device, select
Options and one of the following:
–Rename renames the device.
–Delete removes the device from your
phone if you are no longer going to use
it.
–Services displays description of the
device (such as Headset, Handsfree,
Object Push, and Serial Port).
User Guide 53
Bluetooth Settings
You have settings for how your phone interacts
with Bluetooth devices.
Select Menu > Settings > Bluetooth >
Settings and one of the following:
•My Name changes the name of your phone to
identify to other devices it is paired with.
•Visible Duration sets the time your phone
remains visible to other devices.
•Services shows the list of the Bluetooth
protocol supported by your phone.
•OBEX Authentication enables or disables
OBEX authentication.
Sounds
Your phone has several settings that control the
sound. You can pick from a variety of ringers as
well as control the volume.
Ringers
You can change the ringer for your phone. You
can also assign ringers for different tasks.
Set Ringers
Your phone has multiple ringers you can choose
to use for all incoming calls.
1. Select Menu > Settings > Sounds >
Ringers > Ringer Type.
2. Select a ringer. As you scroll down the list
you will hear the ringers.
Enable Roam Ringer
Your phone can alert you to roaming calls with a
specific ringer.
Select Menu > Settings > Sounds > Ringers
> Roam Ringer > Enabled.
Enable Ringer Shuffle
You can set your phone use a different ringer
every time you receive a call.
Select Menu > Settings > Sounds > Ringers
> Ringer Shuffle and one of the following:
•Enable / Disable turns the ringer shuffle on
or off.
•Edit adds or removes ringers from the
shuffle.
•View shows the current shuffle list.
Set Ringer Mode
Your phone is set to make sounds when you
receive calls, press keys, navigate through menus,
and receive alerts (such as new messages). You
54 Sounds
can silence all sounds and set the phone to vibrate
or light up when you receive calls and alerts.
Select Menu > Settings > Sounds > Ringer
Mode and one of the following:
•Normal Sounds rings for the incoming call
or alert (in effect, returns phone to a
non-silent mode).
•Vibrate Only vibrates for the duration of the
incoming call or other alerts.
•Vibe then Ring vibrates for the first 10
seconds and then rings for the remainder of
the incoming call alert.
•Lights Only lights up for the duration of the
incoming call or other alerts.
You can also press and hold the # Space key to
go back forth from Vibrate Only mode to Normal
Sounds mode.
Note: The phone will ring when it is attached to
an external power source (such as a charger),
even if all sounds have been silenced.
Volume
Control the volume of your phone’s features.
Set Volume
Control the volume of the phone’s ringer,
speakerphone, earpiece and keypad..
1. Select Menu > Settings > Sounds >
Volume > Ringer Volume, Spkrphone
Volume, Earpiece Volume, or Key
Volume.
2. Scroll right to increase the volume or left to
decrease the volume.
3. Press the OK key to save.
Enable Smart Volume
Automatically adjust the volume during a call,
based on surrounding noise levels.
Select Menu > Settings > Sounds > Volume >
Smart Volume > Enabled.
Set Flip Sounds
Assign specific sounds for when your phone flip
opens or closes.
1. Select Menu > Settings > Sounds > Flip
Sounds > Flip Open or Flip Close.
2. Select a sound. As you scroll down the list
you will hear the sounds.
Enable Power On/Off Sounds
You can set your phone to play a sound when
powering on and off.
1. Select Menu > Settings > Sounds > Pwr
On/Off Sound > Power On Sound or
Power Off Sound.
2. Select a sound. As you scroll down the list
you will hear the sounds.
Keypad
Control the keypad tones of the phone.
User Guide 55
Set Key Press Sounds
Choose the sounds the keys make when pressed.
Select Menu > Settings > Sounds > Keypad >
Key Sound > Tone, Click, or Off.
Set Key Tone Length
Control the length of the keypad tones.
Select Menu > Settings > Sounds > Keypad >
Key Length > Normal or Long.
Display
Your phone has several settings that control the
display.
Set Wallpaper
You can select a wallpaper for your phone’s home
screen.
Select Menu > Settings > Display > Set
Wallpaper and one of the following options:
•Camera Pictures selects from taken
pictures.
•Saved Images selects from saved images.
•Wallpapers selects from wallpapers.
•None turns off the wallpaper.
Enable Wallpaper Shuffle
You can set your phone to shuffle through your
wallpapers.
Select Menu > Settings > Display >
Wallpaper Shuffle and one of the following:
•Enable / Disable turns the wallpaper shuffle
on or off.
•Edit adds or removes wallpapers from the
shuffle.
•View shows the current shuffle list.
•Set Shuffle Time sets the time interval for
each wallpaper change.
Set Screensaver
Screensavers appear on the home screen during
idle state. A screensaver activates 10 seconds after
the last keypress. Incoming calls and alerts
override the screensavers.
Select Menu > Settings > Display > Set
Screensaver and one of the following options:
•Camera Pictures selects from taken
pictures.
•Saved Images selects from saved images.
•Screensavers selects from screensavers.
•None turns off the screensaver.
56 Display
Set Theme
You can select a color theme for the display
background of your phone.
1. Select Menu > Settings > Display >
Themes.
2. Select a color theme. As you scroll down the
list you will preview the themes.
Set Main Menu View
Display menus in various formats.
Select Menu > Settings > Display > Main
Menu View and one of the following:
•Grid displays icons of each menu item, with
its name at the top of the screen.
•List displays a list of all menu items.
The next time you select Menu from the home
screen, you see the menu style you selected.
Set My Banner
The banner is the personal label for your phone.
It appears on the home screen above the time and
date. To change your banner:
1. Select Menu > Settings > Display > My
Banner.
2. Select Edit and press the Back key to clear
the current banner.
3. Enter your new text and select Save.
Set Backlight Duration
You can set the length of time the backlighting
remains on:
Select Menu > Settings > Display >
Backlighting and one of the following:
•Always Dim forces the backlight to remain
dim until it turns off.
•10 Seconds, 15 Seconds, or 30 Seconds
turns backlighting on for the set time after
your last keypress.
•Always Bright forces the backlight to remain
bright until it turns off.
Set LightPipe Behavior
Controls the behavior of the LED light on the
phone.
Select Menu > Settings > Display > Lightpipe
Behavior and one of the following:
•Enable All turns the LED display on.
•Disable All turns the LED display off.
•Disable while Charging turns the LED
display off when the phone is fully charged.
Set Brightness
Change the brightness of the display.
1. Select Menu > Settings > Display >
Brightness.
2. Scroll to change the brightness.
3. Press the OK key to save.
User Guide 57
Set Language
Your phone can display alternative languages.
Select Menu > Settings > Display > Language
and a language.
Set Time and Date Format
Your phone can display different time and date
formats.
Select Menu > Settings > Display >
Time/Date Format and a format.
Set External Display
Controls what information is shown on the
external display.
Select Menu > Settings > Display > External
Display and one of the following:
•Icons and Time displays information icons
and time.
•Icons Only displays icons only.
•Time Only displays time only.
Convenience
Your phone has several settings that may make
your phone more convenient to use.
Enable Airplane Mode
While in an airplane, it is normally required that
you turn off your mobile phone because it emits
RF signals that interfere with air traffic control. In
Airplane mode, however, your phone will not emit
RF signals. You cannot make or receive calls,
send text messages, use the browser, or
Bluetooth, but you can play games, use the
Scheduler, set the clock, and make emergency
calls to designated emergency numbers. Please
check with uniformed personnel before operating
your phone in Airplane mode.
To set your phone to Airplane mode:
Select Menu > Settings > Convenience >
Airplane Mode > Enabled > OK.
If you turn on Airplane mode, you can also set the
time and date manually.
Set Date and Time
While in Airplane Mode, your phone does not
keep time automatically. You can set the time and
date manually.
1. Select Menu > Settings > Convenience >
Set Time/Date.
2. Press the OK key to change the date.
– Scroll left or right to move between
month, day and year fields.
– Scroll up or down to change month, day
and year.
3. Press the OK key to save the date.
4. Press the OK key to change the time.
– Scroll left or right to move between hour,
minute and AM/PM fields.
– Scroll up or down to change hour,
minute and AM/PM.
58 Convenience
5. Press the OK key to save the time.
6. Select Done.
Enable Auto-Hyphenation
Auto-hyphenation, when enabled, automatically
inserts hyphens into your phone numbers to be
consistent with the U.S. dialing plan. For example,
1-222-333-4444.
To turn on auto-hyphenation:
Select Menu > Settings > Convenience >
Auto-Hyphen > Enabled.
Enable 1-Touch Dialing
The 1-Touch Dialing feature is the fastest way to
call a speed dial location. To call a contact with
speed dial, press and hold the speed dialing
location.
If it is a two-digit location, press the first digit
briefly, then press and hold the second digit.
Note: To use 1-Touch dialing, you must enable
1-Touch dialing on your phone and have a speed
dial location assigned to a contact.
To turn on 1-touch dialing:
Select Menu > Settings > Convenience >
1-Touch Dialing > Enabled.
Hold Call
Enable Hold Call
The Hold Call feature allows you to place
incoming calls on hold until you are ready to
answer them.
Note: The Hold Call feature will not work if the
Open to Answer feature is enabled. See “Enable
Open to Answer” on page 59.
1. Select Menu > Settings > Convenience >
Hold Call > Enabled.
If you have not recorded a hold message, you
will be prompted to record one, such as
“Please hold. I’ll answer in a minute.”
2. Record the message twice, as prompted.
3. Select Save to save the message or Options
and one of the following.
–Play to replay your message.
–Re-Record to record your message
again.
–Exit to exit.
The next time a call comes in, you will have the
option of placing it on hold.
Place a Call on Hold
You can place a call on hold once you have
enabled this feature.
Note: If you are already on a call and you receive
another call, you cannot place the incoming call
on hold. It will go to voicemail.
User Guide 59
When a call comes in, do the following:
1. Select Options > Hold Call. The caller will
be placed on hold and will hear your
recorded hold message.
2. Select Answer to speak to the caller on hold
or End Call to hang up without speaking.
Change Hold Call Message
1. Select Menu > Settings > Convenience >
Hold Call > Re-Record Msg.
2. Record the message twice, as prompted.
3. Select Save to save the message or Options
and one of the following.
–Play to replay your message.
–Re-Record to record your message
again.
–Exit to exit.
Enable Fast Find
With fast find enabled, you can press one or two
keys to view close matches of the number you are
looking for.
1. From the home screen, press the keys
corresponding to the letters of the name you
want to find. A matching contact or speed
dial entry appears.
2. Scroll to the contact you want and press the
Send key to call the number.
To enable fast find:
Select Menu > Settings > Convenience > Fast
Find > Enabled.
Enable Frequent List
From the home screen, select Contacts. The last
15 of your most frequently called contacts appear
when the Frequent List is enabled. Scroll past the
double line to view the entire Contacts directory.
To enable frequent list:
Select Menu > Settings > Convenience >
Frequent List > Enabled.
Enable Minute Alert
Your phone can alert with a short beep ten
seconds before each minute passes during a call.
Select Menu > Settings > Convenience >
Minute Alert > Enabled.
Set Missed Call Alert
Choose your alert for missed calls.
1. Select Menu > Settings > Alerts >
Missed Call Alert.
2. Select an alert.
If you select an alert with an & Remind, the phone
notifies you once when a new message is received
and then notify you again every five minutes. To
stop a reminder alert, select Ignore.
Enable Open to Answer
Open to answer allows you to answer a call by
opening the phone.
Select Menu > Settings > Convenience >
Open to Answer > Enabled.
60 Voice Features
Enable Any Key Answer
Set your phone to answer a call when press any
key.
Select Menu > Settings > Convenience > Any
Key Answer > Enabled.
Voice Features
Following features allow you to customize the
voice commands.
Enable Automatic Add
You can set the phone to automatically add a
contact to your voice dial list when you create a
new contact.
Select Menu > Settings > Voice Features >
Automatic Add > Enabled.
Set Expert Mode
When expert mode is used, instead of speaking a
command following the initial voice prompts, you
can speak the command after you hear a tone.
Select Menu > Settings > Voice Features >
Expert Mode and one of the following:
•Normal sets phone to default voice prompts.
•Expert sets phone to sound tones instead of
voice prompts.
Set Display Results
You can set the phone to display up to three
recognition contacts when calling or searching
for a contact with voice commands.
Select Menu > Settings > Voice Features >
Display Results > Single Best or Three Best.
Set Digit Lengths
You can set the number of digits used for a phone
number in your voice dial list.
Select Menu > Settings > Voice Features >
Digit Lengths and one of the following:
•North American allows 7, 10, and 1 + 10
digits in a phone number.
•Permit All allows 4-14 digits in a phone
number.
Voice Answer
Enable Voice Answer
You can set your phone to answer a call with your
voice when using a headset.
1. Disable the Auto-Answer feature, see “Enable
Auto-Answer” on page 62.
2. Set the phone to normal sounds, see “Set
Ringer Mode” on page 53.
3. Set the phone to play sound from the
headset, see “Set Headset Sounds” on page
61.
4. Select Menu > Settings > Voice Features
> Voice Answer > With Accessory.
User Guide 61
Use Voice Answer
When you receive an incoming call, the phone
prompts you with a voice recording. If the caller
is recognized as a contact entry in your phone,
then the phone prompts “Incoming call from
(Name), answer?” Do one of the following:
• Say “Yes” or press any except the End key to
answer the call.
• Say “No” or press the End key to ignore the
call.
• Remain silent. The voice alert repeats twice
and the phone rings once, then returns to the
home screen.
Voice Wake-up
Enable Voice Wake-up
You can set your phone to make a call using a
headset.
Select Menu > Settings > Voice Features >
Voice Wake-up > With Accessory.
Use Voice Wake-up
To wake up the phone:
1. Say “Wake Up” and listen for a tone.
2. Say “Wake Up” again until you hear two
tones.
If the phone does not recognize your Wake Up
command, see “Use Voice Training” on page 61.
Use Voice Training
If your phone is having trouble recognizing your
voice, you can train by speaking number
commands.
1. Select Menu > Settings > Voice Features
> Voice Training.
2. Read the message and select OK.
3. Select Train Numbers.
4. Read the message and select OK.
5. Follow the prompts displayed on the screen.
Speak each number until training is
complete.
To untrain your phone select Menu > Settings >
Voice Features > Voice Training > OK >
Untrain Numbers.
Accessories
This section describes settings that affect
accessories you use with your phone.
Set Headset Sounds
When a headset is attached to your phone, the
ringer can be played through the headset or
phone speaker.
Select Menu > Settings > Accessories >
Headset Sounds and one of the following:
•Out of phone rings from the phone speaker.
•Out of headset rings from the headset.
62 Network
Enable Auto-Answer
When a headset is attached to your phone, the
phone can be set to answer automatically.
Select Menu > Settings > Accessories >
Auto-Answer > After 5 Seconds. The phone
will automatically answer after 5 seconds.
Enable TTY
You can connect the phone to a teletype (TTY)
device for the hearing impaired.
Note: Enable TTY only when using the phone with
a TTY device.
1. Connect the TTY device to your phone.
2. Select Menu > Settings > Accessories >
TTY Device.
3. At the notification, select OK.
4. Select on of the following options:.
–TTY Off to disable TTY.
–TTY On to enable for TTY devices.
–TTY On + Talk to enable for TTY
devices and voice carry over.
–TTY On + Hear to enable for TTY
devices and hearing carry over.
Note: You can also enable TTY when you enter
##889 with your keypad and select TTY.
Set Com Port Speed
The Com Speed sets the data rate at which your
phone connects to a laptop or PC.
Select Menu > Settings > Accessories > Com
Port Speed and a speed.
Check with your service provider for details.
Enable Hearing Aid
You can use your phone with a T-coil hearing aid
device.
Note: Enable hearing aid feature only when using
the phone with a T-coil hearing aid device.
1. Connect the T-coil hearing aid device to your
phone.
2. Select Menu > Settings > Accessories >
T-coil Hearing Aid.
3. At the notification, select OK.
4. Select Enabled.
Network
Your phone has several settings for how your
phone connects to a network.
Enable Date Mode
Your phone may be able to receive certain data,
depending on the system sending the information.
You cannot receive voice calls while the phone is
in data mode. To receive data, you must connect
the phone to a laptop or PC and switch the phone
from voice mode to data mode.
User Guide 63
Note: To purchase a cable, visit
www.kyocera-wireless.com/store.
To enable data mode:
Select Menu > Settings > Network > Data
Calls and one of the following:
•Voice Only turns data mode off.
•Data, next call sets the phone to data mode
for the next incoming call or the next ten
minutes.
•Data, until off sets the phone to data mode
until the phone is turned off.
Enable Privacy Alert
Set your phone to alert you when enhanced digital
CDMA privacy is lost or regained.
Select Menu > Settings > Network > Privacy
Alert > Enabled.
Enable Voice Privacy
Set your phone to use enhanced digital CDMA
privacy.
Select Menu > Settings > Network > Voice
Privacy > Enhanced.
Enable Roaming Service Alert
Use this setting if you want the phone to alert you
when you roam outside of your home service
area.
Select Menu > Settings > Network >
Roam/Svc Alert and one of the following:
•Disabled turns roaming service alert off.
•When no svc alerts you with three tones
decreasing in pitch when service is lost and
three tones increasing in pitch when service is
acquired again.
•On roam change alerts you with two
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
•On any change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones if
the phone loses service.
Set Roaming Restrictions
You can restrict your phone from making a call
when roaming.
Select Menu > Settings > Network > Roam
Option and one of the following:
•Automatic allows roaming.
•No Roaming does not allows roaming.
64 Network
Set Phone Line
Your phone can have two service accounts, or
phone lines, associated with it. Each phone line
has its own phone number.
Note: You must first establish a second phone
line with your service provider. Once established,
a second phone number becomes available in the
menu for selection.
Select Menu > Settings > Network > Set
Phone Line and a phone line.
When you are using one line, you cannot receive
calls from the other. It would be as if the phone
were “off” for that number. Your voicemail,
however, will still take messages. All contacts and
settings are shared for both lines.
Set Location Information
This setting allows you to share your location
information with network services other than
emergency services (for example, 911, 111, 999
and 000) in markets where service has been
implemented. This feature works only when your
phone is in digital mode. You do have the option
of turning off the locator to emergency services.
Select Menu > Settings > Network >
Location and one of the following:
•911 Only (default) shares your position
information only with emergency services
when you call your 3-digit emergency code.
•Location On shares your position
information, in addition to emergency
services.
Set Web Alerts
You can set an alert to confirm the start or exit of
the browser.
Select Menu > Settings > Network > Web
Alert and one of the following:
•At Start prompts when you start a session.
•At End prompts when you end a session.
•Both prompts when you start and end a
session.
•No Prompts for no prompts.
Enable Roaming Call Alert
You can set the phone to warn you before you
answer or place a call while roaming.
User Guide 65
Note: Call prompt is disabled when the phone is
in Emergency Mode.
Select Menu > Settings > Network > Roam
Call Alert > Call Prompt.
The phone emits a distinctive ring to indicate
when you are roaming during a call. To accept or
place a call while roaming, you must press 1.
Security
This section describes all the features involved in
securing your phone and preventing access to
personal information. All security features are
shielded by a four-digit lock code.
Lock Phone
Set Lock Phone
When your phone is locked, you can call only
emergency numbers or your service provider’s
customer service number. You can still receive
incoming calls.
1. Select Menu > Settings > Security.
2. Enter your four-digit lock code.
3. Select Lock Phone.
4. Select OK to clear notification.
5. Select one of the following:
–Never leaves the phone always unlocked.
–On power up locks the phone every
time you turn it on.
–Now locks the phone immediately.
Unlock Phone
Do the following to unlock the phone:
• From the home screen, select Yes.
• Enter your four-digit lock code.
Set Limit Calls
You can limit the calls that can be made from your
phone to emergency numbers, your contacts, and
your service provider’s numbers.
1. Select Menu > Settings > Security.
2. Enter your four-digit lock code.
3. Select Limit Calls and one of the following:
–No Limit does not limit calls.
–Limit Outgoing limits outgoing calls.
Incoming calls can be answered.
–Limit All limits both incoming and
outgoing calls.
Assign ICE Numbers
The ICE (in case of emergency) numbers feature
allows you to specify three personal phone
numbers that can be called when the phone is
locked.
1. Select Menu > Settings > Security.
2. Enter your four-digit lock code.
3. Select ICE Numbers.
4. Select an Unassigned slot.
5. Enter the number and select Done.
66 View Phone Information
You can view these numbers only when they’re
being entered for the first time.
To make a call to an ICE number from a locked
phone, you must dial the number (including area
code) exactly as it was stored in ICE numbers.
Erase All Contacts
You can erase all entries from your
Contacts directory.
1. Select Menu > Settings > Security.
2. Enter your four-digit lock code.
3. Select Erase Contacts and one of the
following.
–No exits without erasing contacts.
–Yes erases all contacts. A confirmation
prompt appears to verify your decision.
4. Select Yes to confirm.
Change Lock Code
Change your lock code from the default provided
by the service provider. The lock code is typically
0000 or the last 4 digits of your phone number.
1. Select Menu > Settings > Security.
2. Enter your four-digit lock code.
3. Select New Lock Code and one of the
following.
4. A confirmation prompt appears. Select Yes.
5. Enter a new four-digit code.
6. Re-enter your new lock code. The lock code
is now changed.
View Phone Information
You can access information regarding your
phone.
Select Menu > Settings > Phone Info and one
of the following:
•Build Info shows specific software and
hardware information.
•Icon Key shows the icons used by your
phone.
•User Guide accesses the user guide.
User Guide 67
10 Tools
Your phone comes with tools and games. Some of
the games or tools described here may not be
available on your phone. If you receive and
incoming call while you are playing a game, the
game is paused and exited. You can return to play
once the call alert ends. Games do not remain
paused if the phone is turned off or loses power.
Voice Memo
The Voice Memo tool allows you to record and
play back audio memos.
Record Voice Memos
To record new voice memos, do the following:
1. Select Menu > Tools > Voice Memo >
Record New.
2. Say your voice memo. Select Stop when you
are done.
3. Select Save to save your memo.
If an incoming call is received while you are
recording a memo, the memo is saved and the
incoming call screen appears.
View Voice Memos
To play and use voice memos, do the following:
1. Select Menu > Tools > Voice Memo >
Recorded Memos.
2. At the file list, highlight a memo.
3. Select Play to play the memo select Options
and one of the following:
–Send creates a message with the file
attached or sends file to a Bluetooth
device.
–Erase deletes the memo.
–Assign assigns the memo to a funtion.
–Send to Online uploads a file to an
online server.
–Lock / Unlock prevents accidental
erasing of the memo.
–Rename renames the memo.
–Shuffle adds the file to your ringer
shuffle list.
–Details displays the details of the file.
–Erase All deletes all unlocked memos.
Scheduler
The Scheduler allows you to schedule events and
set reminder alerts.
Create an Event
1. Select Menu > Tools > Scheduler > Add
New Event.
2. Enter a name. Scroll down to move to the
next field when done.
3. Choose an event. Press the OK key and select
a choice from the list.
68 Scheduler
4. Modify the date, if needed. Press the OK key
to change the date.
– Scroll left or right to move between
month, day and year fields.
– Scroll up or down to change month, day
and year.
Press the OK key to save date and move to
the next field.
5. Modify the time, if needed. Press the OK key
to change the time.
– Scroll left or right to move between hour,
minute and AM/PM fields.
– Scroll up or down to change hour,
minute and AM/PM.
Press the OK key to save time and move to
the next field.
6. Modify the duration of event, if needed. Press
the OK key to change the duration.
– Scroll left or right to move between hour
and minute fields.
– Scroll up or down to change hour and
minute.
Press the OK key to save duration and move
to the next field.
7. Choose a priority. Press the OK key and
select a choice from the list.
8. Choose a reminder. Press the OK key and
select a choice from the list.
9. Enable silent mode, if needed. press the OK
key and select No to leave on normal sounds
or During Event to place phone in silent
mode during the duration of the event.
10. Make the event recurring, if need. Press the
OK key and select a choice from the list.
11. Select Save to save the event.
View Events
You can view the events saved to the scheduler.
View by Date
1. Select Menu > Tools > Scheduler and one
of the following:
–View Month displays the current month.
Days with events are highlighted. Scroll
through the calendar. Press the OK key
to select a date.
–View Day displays the current date.
Scroll right or left to move to another
date.
–Go to Date chooses a specific date.
Scroll left or right to move between
month, day and year fields. Scroll up or
down to change month, day and year.
Press the OK key to select the date.
2. At the day view, do one of the following.
– Select an existing event to view the event
detail.
– Scroll to a time and select Add New to
create a new event.
– Select Options > Go to Today to go to
the current date.
User Guide 69
– Select Options > Go to Date to go to a
specific date.
– Select Options > Erase Today’s
Events to delete all events for that date.
View by List
1. Select Menu > Tools > Scheduler > View
All Events.
2. At the event list, select one of the following:
– Scroll to an event and select View to
display the event detail.
– Select Options > Sort by Time to sort
events by time.
– Select Options > Sort by Type to sort
events by type.
– Select Options > Sort by Priority to
sort events by priority.
– Select Options > Erase All Events to
delete all events.
– Select Options > Erase All Past
Events to delete all past events.
Modify an Event
You can modify existing events.
From the event detail screen, you can select OK to
return to the previous screen or Options and one
the following:
•Edit edits the event.
•Erase deletes the event.
•Send creates a message with the event
attached or sends event to a Bluetooth device
or printer.
•Copy creates an event with the existing event
information.
Scheduler Settings
You can change the default settings of your
scheduler.
Select Menu > Tools > Scheduler > Settings
and one of the following:
•Scheduler Hours changes the work day.
•Auto Delete deletes events automatically.
•Priority prioritizes new events.
•Reminder assigns reminders for new events.
•Reminder Sound assigns sound alerts for
new event reminders.
•Silent Mode sets phone to silent mode for
new events.
Alarm Clock
You can set up to four alerts with your phone’s
three alarm clocks and one quick alarm.
70 Use Tip Calculator
Note: The alert occurs only if the phone is on.
Set an Alarm
1. Select Menu > Tools > Alarm Clock.
2. Scroll to one of the alarms and select Set.
3. Modify the time, if needed. Press the OK key
to change the time.
– Scroll left or right to move between hour,
minute and AM/PM fields.
– Scroll up or down to change hour,
minute and AM/PM.
Press the OK key to save time and move to
the next field.
4. Choose a sound. Press the OK key and select
a choice from the list.
5. Make the alarm recurring, if needed. Press
the OK key and select a choice from the list.
6. Enter a note. Press the OK key.
7. Select Save to set the alarm.
When the alarm rings, select Stop to turn off the
alarm or Snooze to silence the for 10 minutes.
Note: Opening the flip turns off the alarm.
Set the Quick Alarm
1. Select Menu > Tools > Alarm Clock.
2. Highlight the quick alarm and select Set.
3. Choose a time. A notification shows the quick
alarm is on.
When the quick alarm rings, select Off to turn off
the alarm or Reset to set the quick alarm again.
Use Tip Calculator
The Tip Calculator helps you calculate how much
tip to include with a bill.
1. Select Menu > Tools > Tip Calculator.
2. Enter the amount of your bill.
3. Select percentage you want to tip.
4. Enter the number of guests splitting the bill.
5. Select Next. The bill amount is shown.
6. Select Done to return to menu.
Use Calculator
The Calculator can perform basic mathematical
operations.
1. Select Menu > Tools > Calculator.
2. Enter the first number.
3. Select a mathematical operation:
– Scroll left to multiply.
– Scroll right to divide.
– Scroll up to add.
– Scroll down to subtract.
The chosen operation is highlighted.
4. Enter the second number. Press the OK key
to perform the operation. The result is
shown.
5. Select Exit to return to menu or Options
and one of the following:
–MS clears value currently stored and
adds the displayed result to value stored
in memory.
User Guide 71
–M+ adds displayed result to the value
stored in memory.
–MR displays currently stored value on
the screen.
–MC clears value currently stored in
memory.
Use Timer
The Timer counts down for the specified time. It
beeps when that amount of time has elapsed.
1. Select Menu > Tools > Timer > Set.
2. Enter the first number.
3. Enter the time length.
– Scroll left or right to move between
hours, minutes and seconds fields.
– Scroll up or down to change hours,
minutes and seconds.
4. If needed, select Sound and one of the
sounds to change the sound.
5. To work the timer, select the following
options:
–Start begins the countdown.
–Stop pauses the countdown.
–Reset clears the timer.
When the countdown is complete select Off to
silence the alarm.
Use Stopwatch
The Stopwatch counts time for you.
1. Select Menu > Tools > Stopwatch.
2. To work the stopwatch, select the following
options:
–Start begins counting.
–Stop pauses couting.
–Reset clears the stopwatch.
Press the Back key to return to the menu.
Memopad
Write memos on your phone.
Write a Memo
To write a memo:
1. Select Menu > Tools > Memopad > New
Memo.
2. Enter the memo.
3. Select Save.
Use a Memo
To use memos:
1. Select Menu > Tools > Memopad > View
Memos.
2. From the memo list, select a memo.
3. Select Options and one of the following:
–Edit modifies the memo.
–Send as SMS sends memo with a text
message.
–Use Number uses a number in the
memo.
–Lock Memo / Unlock Memo prevents
accidental erasing of the memo.
72 World Clock
–Erase deletes the memo.
–Erase All deletes all the unlocked
memos.
World Clock
The world clock lets you check times in cities
around the world in relation to local time.
Set World Clock
1. Select Menu > Tools > World Clock.
The world clock menu is displayed. Your
local time and date is on the first line,
followed by your selected world city and that
city’s time and date.
2. When you first access World Clock, scroll left
or right to select a time zone.
The world clock menu is displayed again, with the
new time zone.
Search World Clock
1. Select Menu > Tools > World Clock >
Options > Search City or Search
Country.
2. In the search field, enter letter(s) to search
by. Results are listed as you type.
3. Select a city or country from the list.
User Guide 73
11 BREW Apps
Your Kyocera phone has the added ability to
download and manage applications through
BREW.
BREW brings you the full range of applications
and services you have come to expect from the
Internet: Email and instant messaging, real-time
navigation services, group chat, games, relevant
news, and much more.
For more information about BREW capabilities
and application pricing, contact your service
provider.
How does BREW Work?
You connect to the server, download applications,
and then manage them as you like. When you
choose an application, you have the option of
choosing a demo, various limited use options, or
the full version—all varying in price. If you
choose a demo, BREW lets you know when it has
expired. If you choose a priced version, the
amount is added to your phone bill. BREW also
lets you know if you’re running out of memory. At
that point, you can either disable an application
or remove it completely.
Once applications are loaded, you can update to
newer versions as they become available.
Download an Application
1. Select Menu > BREW Apps >
Mobileshop > Catalog. When a
connection is made, a list of application
types appears.
2. Select an application type. A list of
applications appears. Long titles scroll left as
you highlight them.
3. Select an application. A list of usages
appears. There may be one or more usages
available. Prices are specified for each
usage.
4. Select a usage for the application. You are
prompted to confirm your purchase.
5. Select Yes to confirm. The application
downloads to your phone. Download times
may vary.
To open the application now, select Yes. If you
select No, you return to the BREW Apps menu,
where you see a link to your new application.
Note: Your connection to the application server
automatically ends after 30 seconds, unless you
connect again to download more apps. If you
want to end the connection manually, press the
End key on your phone.
74 Open an Application
Open an Application
Downloaded applications are stored under the
BREW Apps menu. Each application comes with
its own unique icon, to help you identify it easily.
Select Menu > BREW Apps and the application.
The BREW Apps icon always remains at the top
of this menu. Downloaded applications are listed
after.
View Application Details
You can get information about the size of an
application and how many uses it has left before it
runs out.
1. Select Menu > BREW Apps > Settings >
Manage Apps.
2. Select an application to view its details.
Remove an Application
If you remove an application, it is removed
completely from your phone. If you want to use it
again, you must pay for it again. If you want to free
up space on your phone, we recommend you
disable the application.
1. Select Menu > BREW Apps > Settings >
Manage Apps.
2. Select an application.
3. Select Remove. At the prompt, select Yes to
confirm.
Disable an Application
If you are running out of memory and would like
to download more applications, but do not want
to completely remove those you have paid for, you
can simply disable them. This means you have to
re-download an application in order to use it
again, but don’t have to pay for it again.
1. Select Menu > BREW Apps > Settings >
Manage Apps.
2. Select an application.
3. Select Lock App. At the prompt, select Yes
to confirm.
The application is listed in the BREW Apps
menu. The icon looks like an empty box.
Check Available Memory
The amount of memory depends on the number
of applications you download.
Select Menu > BREW Apps > Settings >
Manage Apps > System Info.
The amount of memory left is shown.
User Guide 75
12 Media Gallery
Your phone stores media files and can display
those files on the phone display.
Browse Camera Pictures
To browse the camera pictures on your phone:
1. Select Menu > Media Gallery > Images >
Camera Pictures. You can scroll through
the file list.
2. Select View to open a highlighted file or
select Options and one of the following:
–Send creates a message with the file
attached or sends file to a Bluetooth
device or printer.
–Take Picture launches the camera.
–Erase deletes the file.
–Assign assigns the file as a Caller ID,
wallpaper, or screensaver.
–Slideshow starts a slideshow beginning
with the selected file.
–Send to Online uploads a file to an
online server.
–Lock / Unlock prevents accidental
erasing of the file.
–Rename renames the file.
–Shuffle adds the file to the wallpaper
shuffle.
–Details displays details of the file.
–Erase All deletes all unlocked files.
Modify a Picture
To modify a picture you have taken, do the
following:
1. Select Menu > Media Gallery > Images >
Camera Pictures and a picture from the
list.
2. Select Options > Modify > Options and
one of the following:
–Rotate rotates the picture. Options
include 90° right, 180°, 90° left, flip
horizontal and flip vertical.
–Resize resizes the image. Options
include 90%, 75%, 50% and 35%.
–Brightness adjusts the brightness.
–Sharpness adjusts the sharpness.
–Saturation adjusts the saturation.
–Hue adjusts the hue.
–Auto Adjust automatically adjusts all
levels.
–Color Tone adjusts the color tone.
Options include grayscale, negative, sepia
and emboss.
3. If you modify the picture, select Save to save
your changes. You can save the modified
picture over the existing file or save it as a
new file.
76 Browse Saved Images
Browse Saved Images
To browse the saved images on your phone:
1. Select Menu > Media Gallery > Images >
Saved Images. You can scroll through the
file list.
2. Select View to open a highlighted file or
select Options and one of the following:
–Send creates a message with the file
attached or sends file to a Bluetooth
device or printer.
–Erase deletes the file.
–Assign assigns the file as a Caller ID,
wallpaper, or screensaver.
–Send to Online uploads a file to an
online server.
–Lock / Unlock prevents accidental
erasing of the file.
–Rename renames the file.
–Shuffle adds the file to the wallpaper
shuffle.
–Details displays details of the file.
–Erase All deletes all unlocked files.
Browse Wallpapers
To browse the wallpapers on your phone:
1. Select Menu > Media Gallery > Images >
Wallpapers. You can scroll through the file
list.
2. Select View to open a highlighted file or
select Options and one of the following:
–Send creates a message with the file
attached or sends file to a Bluetooth
device or printer.
–Erase deletes the file.
–Set Default assigns the file as the
wallpaper.
–Send to Online uploads a file to an
online server.
–Lock / Unlock prevents accidental
erasing of the file.
–Rename renames the file.
–Shuffle adds the file to the wallpaper
shuffle.
–Details displays details of the file.
–Erase All deletes all unlocked files.
Edit Wallpaper Shuffle
To edit the wallpaper shuffle of your phone, do
the following:
1. Select Menu > Media Gallery > Images >
Wallpaper Shuffle.
2. Select Edit to add or remove images from
your wallpaper list or Options > Set
Shuffle Time to modify the time interval for
the shuffle.
To enable this feature, see “Enable Wallpaper
Shuffle” on page 55.
User Guide 77
Browse Screensavers
To browse the screensavers on your phone:
1. Select Menu > Media Gallery > Images >
Screensavers. You can scroll through the
file list.
2. Select View to open a highlighted
screensaver or select Options and one of
the following:
–Send creates a message with the file
attached or sends file to a Bluetooth
device or printer.
–Erase deletes the file.
–Set Default assigns the file the
screensaver.
–Send to Online uploads a file to an
online server.
–Lock / Unlock prevents accidental
erasing of the file.
–Rename renames the file.
–Details displays details of the file.
–Erase All deletes all unlocked files.
Browse Caller IDs
To browse the caller IDs on your phone:
1. Select Menu > Media Gallery > Images >
Caller IDs. You can scroll through the file
list.
2. Select View to open a highlighted file or
select Options and one of the following:
–Assign assigns the file to a contact as a
Caller ID.
–Details displays details of the file.
Browse Saved Sounds
To browse the saved sounds on your phone:
1. Select Menu > Media Gallery > Sounds
> Saved Sounds. You can scroll through
the file list.
2. Select Send to create a message with the
sound attached or select Options and one of
the following:
–Erase deletes the file.
–Assign assigns the sound.
–Send to Online uploads a file to an
online server.
–Lock / Unlock prevents accidental
erasing of the file.
–Rename renames the file.
–Shuffle adds the image to the wallpaper
shuffle.
–Details displays details of the file.
–Erase All deletes all unlocked files.
Browse Ringers
To browse the ringers on your phone:
1. Select Menu > Media Gallery > Sounds
> Ringers. You can scroll through the file
list.
78 Edit Ringer Shuffle
2. Select Assign to assign the ringer or select
Options and one of the following:
–Send creates a message with the file
attached or sends file to a Bluetooth
device.
–Erase deletes the file.
–Send to Online uploads a file to an
online server.
–Lock / Unlock prevents accidental
erasing of the file.
–Rename renames the file.
–Shuffle adds the image to the wallpaper
shuffle.
–Details displays details of the file.
–Erase All deletes all unlocked files.
Edit Ringer Shuffle
To edit the ringer shuffle of your phone, do the
following:
1. Select Menu > Media Gallery > Sounds
> Ringer Shuffle.
2. Select Edit to add or remove sounds from
your ringer list.
To enable this feature, see “Enable Ringer
Shuffle” on page 53.
Browse Voice Memos
To browse the voice memos on your phone:
1. Select Menu > Media Gallery > Sounds
> Voice Memos. You can scroll through the
file list.
2. Select Play to play the voice memo or select
Options and one of the following:
–Send creates a message with the file
attached or sends file to a Bluetooth
device.
–Record New records a new voice
memo.
–Erase deletes the file.
–Send to Online uploads a file to an
online server.
–Lock / Unlock prevents accidental
erasing of the file.
–Rename renames the file.
–Shuffle adds the file to the ringer shuffle.
–Details displays details of the file.
–Erase All deletes all unlocked files.
User Guide 79
Delete All Files
You can delete your unlocked media files:
Select Menu > Media Gallery > Delete All and
one of the following:
•Cam Pics Only deletes all unlocked camera
pictures from the phone.
•Images Only deletes all unlocked images
from the phone.
•Sounds Only deletes all unlocked sounds
from the phone.
•Delete All deletes all unlocked media files
from the phone.
Note: Deleted information cannot be recovered.
Playback Tools
When you playback sound files, use the
Navigation key to select the playback tools
displayed on the screen.
80 Voice Dial List
13 Voice Commands
Voice commands allow you to call a contact, dial a
phone number, access menus, or find contact
information from your voice dial list.
Note: You cannot use voice recognition to end a
call; you must press the End key when the flip is
open.
Voice Dial List
To call or find a contact using voice dial you must
add the contact to your voice dial list. The contact
name must not have more than three words or
components in a contact name for voice dialing
recognition.
Add Contacts
To call or find a contact using voice dial you must
add the contact to your voice dial list. The contact
name must not have more than three words or
components in a contact name for voice dialing
recognition.
To add a contact to your voice dial list:
1. Select Menu > Contacts > Voice Dial
List.
2. At the contact list, highlight a contact and
press the OK key. A check mark appears
next to a name when voice dialing is active.
Check each name you wish use with voice
dialing.
3. Select Save.
Remove Contacts
To remove a contact from your voice dial list:
1. Select Menu > Contacts > Voice Dial
List.
2. At the contact list, highlight a check marked
contact and press the OK key. No check
mark appears next to a name when voice
dialing is inactive. Uncheck each name you
wish remove from voice dialing.
3. Select Save.
Voice Commands
Start Voice Commands
1. From the home screen, press and hold the
Send key to initiate voice commands. The
phone prompts, “Say a command”.
2. Say one of the following commands and
following the voice prompts.
–“Contact <name>” sends call to a
contact on your voice dial list.
–“Dial Number <number>” sends call
by speaking the digits of the phone
number.
–“<shortcut name>” sends you to a
menu item.
–“Find Contact” allows you to find a
contact from your voice dial list.
User Guide 81
Call a Contact
1. If you haven’t already done so, add the
person you wish to call to the Voice Dial List.
See “Add Contacts” on page 80.
2. From the home screen, press and hold the
Send key. The phone prompts, “Say a
command”.
3. Say “Contact” and then name of the person
you want to call.
The phone prompts, “Please repeat” or “Say
a name” if it does not recognize the name. If
the name you spoke matches a contact in the
Voice Dial List, the phone prompts: “Name,
correct?” Say “Yes” to make the call, “No” to
select a similar name, or “Cancel” to cancel
the phone call.
If the phone finds multiple voice tags that
sound like the name you said, the phone will
list the names, you will be asked to verify
which name you want to call. Say “Yes” when
you hear the correct name. Say “No” when
you hear an incorrect name.
4. Press the End key to end the call.
Call a Number
1. From the home screen, press and hold the
Send key. The phone prompts, “Say a
command”.
2. Say “Dial Number” and then speak the digits
of the number you want to call. If you pause,
the phone prompts you, “Did you say
<number>” or “Say a number” if it does not
recognize the name. Say “Yes” to make the
call, “No” to cancel the phone call.
3. Press the End key to end the call.
Use Shortcuts
1. From the home screen, press and hold the
Send key. The phone prompts, “Say a
command”.
2. Say the name of the menu item you want to
access or say “Shortcuts” to view a list of
menu items. The phone prompts, “Say one of
the shortcuts”.
3. Say the name of the menu item you want to
access.
Find Contacts
You can use voice commands to find contacts
listed in your voice dial list.
1. From the home screen, press and hold the
Send key. The phone prompts, “Say a
command”.
2. Say “Find Contacts”. The phone prompts,
“Say a name”.
The phone prompts, “Please repeat” or “Say a
name” if it does not recognize the name. If the
name you spoke matches a contact in the Voice
Dial List, the phone prompts: “Name, correct?”
Say “Yes” to display the contact, “No” to select a
similar name, or “Cancel” to cancel the search.
82 Voice Command Settings
Voice Command Settings
You can control settings for your phone’s voice
recognition feature. For more information, see:
• “Enable Automatic Add” on page 60
• “Set Expert Mode” on page 60
• “Set Display Results” on page 60
• “Set Digit Lengths” on page 60
• “Use Voice Training” on page 61
User Guide 83
14 Get Help
User Guide
You have a user guide located on your phone. To
access this user guide, select Menu > Settings >
Phone Info > User Guide.
The user guide for your phone is also located on
the web at
www.kyocera-wireless.com/support.
Customer Support
Your service provider’s customer support
department may be accessible directly from your
phone when you dial a number, such as *611
(check with your service provider). They can
answer questions about your phone, phone bill,
call coverage area, and specific features available
to you, such as call forwarding or voicemail. For
questions about the phone features, refer to the
materials provided with your phone, or visit
www.kyocera-wireless.com.
For additional questions, you may contact the
Kyocera Wireless Corp. Customer Care Center in
any of the following ways:
• Web site: www.kyocera-wireless.com.
• Email: phone-help@kyocera-wireless.com.
• Phone: 1-800-349-4478 (U.S. and Canada) or
1-858-882-1401.
• Customer support phone numbers are also
available in the following countries:
– India: 1-600-121214 or 0124-284-5000
– Puerto Rico: 1-866-664-6443
Before requesting support, please try to
reproduce and isolate the problem. When you
contact the Customer Care Center, be ready to
provide the following information:
• The name of your service provider.
• The actual error message or problem you are
experiencing.
• The steps you took to reproduce the problem.
• The phone’s mobile equipment identifier
(MEID).
Note: To locate the MEID select Menu >
Settings > Phone Info > Build Info and scroll
down to MEID for the 11-digit number. If your
phone uses an electronic service number (ESN),
then ESN replaces MEID.
84 Qualified Service
Qualified Service
If the problem with your phone persists, return
the phone with all accessories and packaging to
the dealer for qualified service.
Phone Accessories
To shop for phone accessories, visit
www.kyocera-wireless.com/store. You may
also call us at 800-349-4188 (U.S.A. only)
or 858-882-1410.
Become a Product Evaluator
To participate in the testing and evaluation
of Kyocera Wireless Corp. products,
including cellular or PCS phones, visit
beta.kyocera-wireless.com.
User Guide 85
Index
Numerics
1-touch, 58
1-touch dialing, 58
A
accessories, 61
headsets, 61
phone, 84
settings, 61
T-coil hearing aid, 62
TTY device, 62
activating, 19
activating Bluetooth, 51
adding, 27
Bluetooth devices, 51
codes, 28
contacts, 27
extensions, 28
voice dial list, 60, 80
adding contacts, 80
adding devices, 52
adding to a group, 29
addresses, 30
adjusting, 19
airplane, 57
airplane mode, 57
set date/time, 57
alarm clock, 69, 70
alerts, 25, 43, 59, 64
browser, 25, 64
LED, 13
messages, 43
minute, 59
missed calls, 59
pages, 43
privacy, 63
roaming calls, 64
roaming service, 63
vibrating, 54
voicemail, 43
all contacts, 33
all media files, 79
answer, 60
answering, 18
answering calls, 18, 59
any key, 60
any key, 60
any key answer, 60
appended, 42
appended messages, 42
applications, 73
details, 74
disabling, 74
downloading, 73
opening, 74
removing, 74
assign message tone, 28, 32, 47
assign number type, 31
assign picture, 28, 31, 32, 47
assign ringer, 28, 31, 32, 47
assigning, 67, 75, 76, 77, 78
auto answer, 62
auto retrieve, 39, 44
auto-erase, 45
auto-erase incoming, 45
auto-hyphenation, 58
automated lists, 60
B
backlight duration, 56
86
banner, 56
battery
charging, 9
drain, 11
installing, 9, 11
recharging, 10
safety guidelines, 10
behavior, 13
Bluetooth, 51, 53
adding devices, 52
connecting, 52
disconnecting, 52
pairing, 51
phone name, 53
settings, 53
turning on, 51
Bluetooth devices, 51
Bluetooth name, 53
bookmarks, 25
BREW, 73
brightness, 35, 56
browser, 24, 25, 64
alerts, 25, 64
launching, 24
options, 24
searching, 25
browsing, 75, 76, 77, 78
build information, 66
business, 53
business ringers, 53
C
calculator, 70
calendar, See scheduler
call alerts, 64
call history, See recent calls
call lists, 48
erasing, 48
viewing, 48
call logs, see recent calls
call timers, 49
callback number, 37, 45
text message, 37
calling contacts, 81
calling numbers, 29, 81
calls, 20, 62
answering, 18
call lists, 48
data, 62
emergency, 20
ending, 19
holding, 58
limiting, 65
making, 18
silencing, 19
voice commands, 81
camera, 34
brightness, 35
color tone, 35
last picture, 35
mode, 34
multishots, 34
picture compression, 35
picture settings, 34
resolution, 34
self timer, 34
shutter sound, 35
taking pictures, 34
time stamp, 34
white balance, 35
camera pictures, 35
capitalization, 22
CC/BCC fields, 45
CDMA privacy, 63
changing modes, 22
User Guide 87
changing modes, text entry, 22
charging, 9
codes, 28
color
themes, 56
tone, 35
color themes, 56
color tone, 35
com port, 62
com port speed, 62
completing, 42
compression, 35
connecting, 52
connecting Bluetooth devices, 52
contacts, 27, 66
adding, 27
adding to a group, 29
assign message tone, 28
assign number type, 31
assign picture, 28, 31
assign ringer, 28, 31
calling numbers, 29
customizing, 28
delete all, 33
directory, 27
editing, 27, 28
email addresses, 29
erase, 28
erasing, 27, 29, 30, 66
fast find, 59
frequent list, 59
groups, 31
memory, 33
notes, 30
primary number, 29
searching, 32
secret, 29, 30
send as vCard, 27, 28, 31
sending mulitmedia message, 29
sending text message, 29
speed dial list, 29
street addresses, 29, 30
viewing all, 27
voice search, 81
web addresses, 30
contacts directory, 32
convenience, 57
convenience settings, 57
conventions, using this guide, 16
countdown timer, 71
creating, 31, 36, 38, 46
creating events, 67
current mode, 21
custom, 51
custom menu, 51
customer support, 83
customizing, 28
customizing contacts, 28
D
data, 62
calls, 62
data calls, 49
date and time, 57
deal with, 48
default mode, 45
default text mode, 45
default text mode, changing, 45
delete all, 33, 79
details, 74
dial list, 80
dialing, 19
1-touch, 58
speed, 19
88
voice list, 80
digit lengths, 60
directory, 27
directory, contacts, 27
disabling, 74
disconnecting, 52
disconnecting, devices, 52
display, 55
banner, 56
brightness, 56
color themes, 56
language, 57
main menu, 56
screensavers, 55
settings, 55
time/date format, 57
wallpapers, 55
display results, 60
download applications, 73
downloading, 73
applications, 73
games, 73
draft, 42
drafts folder, 42
drain, 11
E
earpiece, 18, 54
volume, 54
edit, 53
editing, 27, 28
editing contacts, 28
email addresses, 29
emergency, 20
calls, 20
numbers, 65
emergency numbers, 65
ending, 19
enhanced options, 36, 38
entering
letters, 21
numbers, 21
symbols, 22
text, 22
erase, 28, 32, 47
erase all, 46
erasing, 27, 29, 30, 41, 48, 66, 67, 75, 76, 77, 78
all contacts, 33
all media files, 79
contacts, 66
multimedia messages, 41
text messages, 41
erasing contacts, 66
evaluation, product, 84
expert mode, 60
expert, voice, 60
extensions, 28
F
failed, 43
fast find, 59
find contacts, 81
flip
answering calls, 59
sounds, 54
flip closed, 54
flip open, 54
folders
camera pictures, 35
draft, 42
images, 75, 76, 77, 78
inbox, 37, 40
outbox, 43
sent, 43
forwarding, 37, 40
User Guide 89
frames, 35
frequent list, 59
G
gallery, media, 75
games, 67, 73
downloading, 73
groups, 31, 32, 46
assign message tone, 32, 47
assign picture, 32, 47
assign ringer, 32, 47
creating, 31, 46
erase, 32, 47
sending mulitmedia message, 32
sending text message, 32
using, 32, 46
H
headsets, 61
auto answer, 62
sounds, 61
voice answer, 60
voice wake-up, 61
help, getting, 83
hold calls, 58
holding, 58
I
icon, 37, 40
icons, 14, 66
multimedia messages, 40
text message, 37
images, 75, 76, 77, 78
assigning, 76
browsing, 75, 76, 77, 78
erasing, 76
locking, 76
sending, 76
inbox, 37, 40
incoming calls, 42, 48
installing, 9, 11
Internet, 24
K
key tone length, 55
keypad, 54
key tone length, 55
sounds, 55
volume, 54
keys
tone length, 55
tones, 55
L
language, 57
last picture, 35
last taken, 35
launching, 24
LED, 13
behavior, 13
LED display, 56, 57
letters, 21
lights only alerts, 54
limiting, 65
limiting calls, 65
list view, 44
location information, 64
lock code, 66
locking, 38, 41, 67, 75, 76, 77, 78
phone, 65
text messages, 38, 41
locking phone, 65
M
main, 15
main menu, 15, 56
main view, 56
making, 18
90
making calls, 18
media files
delete all, 79
media gallery, 75
memopad, 71
memory, 33, 74
menus, 15
custom, 51
main view, 56
setting, 50
messages, 43
alerts, 43
appended, 42
auto-erase incoming, 45
callback number, 45
completing, 42
default text mode, 45
failed, 43
incoming calls, 42
list view, 44
multimedia messages, 38
pending, 43
quicktext, 44
saved, 45
sent, 43
settings, 43
signature, 44
text messages, 36
unable to send, 42
minute, 59
minute alerts, 59
missed calls, 48, 59
alerts, 59
deal with, 48
mode, 34, 53
modes
airplane, 57
expert, voice, 60
ringers, 53
text entry, 21
modifying, 75
modifying events, 69
multimedia messages, 38, 39, 40, 41, 46
auto retrieve, 39, 44
CC/BCC fields, 45
creating, 38
erasing, 41
forwarding, 40
icon, 40
notifications, 39
options, 39
previewing, 39
prompts, 40
quicktext, 39
recording sounds, 38
replaying, 40
replying, 40
request receipt, 39
retrieving, 39
saving, 41
send later, 39
sender information, 40
set priority, 39
slide interval, 39
slides, 41
taking pictures, 38
viewing, 40
multiple pictures, 34
multishots, 34
N
network, 62
location information, 64
set phone line, 64
User Guide 91
network settings, 62
notes, 30
notes, contacts, 30
notification, 37
notifications, 39
multimedia messages, 39
text messages, 37
number, 46
numbers, 21, 65
O
on and off sounds, 54
open to answer, 59
opening, 74
options, 24, 36, 39
outbox, 43
outgoing calls, 48
overview, 11
P
pages, 43
pages alerts, 43
pairing, 51
pending, 43
personal, 53
personal ringers, 53
phone, 65, 84
answering calls, 18
Bluetooth name, 53
codes, 28
extensions, 28
icons, 14
making calls, 18
overview, 11
setting line, 64
turning on and off, 18
phone information, 66
icons, 66
software build, 66
user guide, 66
phone name, 53
picture, 34
picture compression, 35
picture messages, see multimedia messages
picture settings, 34
pictures
assigning, 75, 77, 78
compression, 35
erasing, 75, 77
frames, 35
last taken, 35
locking, 75, 77
modifying, 75
sending, 75
slideshow, 75
taking, 34
playback tools, 79
playing, 67, 78
power
on and off sounds, 54
power on and off, 54
prepend, 29
previewing, 39
primary number, 29
privacy, 63
privacy alerts, 63
prompt mode, 40
prompts, 40
Q
quick alarm, 70
quick reference, 22
quicktext, 36, 39, 44
R
rapid entry, 21
92
read receipt request
multimedia messages, 46
text messages, 46
receipt request
multimedia messages, 39, 46
text message, 37
text messages, 46
recent calls, 48
erase all, 46
recharging, 10
recording, 67
recording sounds, 38
redialing, 18
removing, 74
removing contacts, 80
replaying, 40
replying, 37, 40
multimedia messages, 40
text messages, 37
request read receipt, 46
request receipt, 37, 39, 46
resolution, 34
restrict, 63
restrict roaming, 63
retrieving, 37, 39
ringer shuffle
edit, 53
ringers, 53, 54
business, 53
erasing, 78
locking, 78
mode, 53
personal, 53
roam, 53
sending, 78
shuffle, 53, 55
silent mode, 53
type, 53
volume, 54
roam, 53
roaming
call alerts, 64
restrict, 63
service alerts, 63
roaming calls, 64
roaming service, 63
S
safety guidelines, 10
saved, 45
saving, 37, 41
scheduler, 67, 69
creating events, 67
modifying events, 69
settings, 69
viewing events, 68
screensavers, 55
erasing, 77
locking, 77
sending, 77
searching, 25, 32, 72
contacts directory, 32
fast find, 59
frequent list, 59
voice commands, 81
world clock, 72
secret, 29, 30
security, 65
emergency numbers, 65
erasing contacts, 66
limiting calls, 65
lock code, 66
locking phone, 65
settings, 65
self timer, 34
User Guide 93
send as vCard, 27, 28, 31
send later, 37, 39
sender information, 38, 40
sending, 67, 75, 76, 77, 78
sending mulitmedia message, 29, 32
sending text message, 29, 32
sent, 43
sent folder, 43, 45
service alerts, 63
set date/time, 57
set phone line, 64
set priority, 37, 39
multimedia messages, 39
text message, 37
setting, 50
setting line, 64
settings, 43, 53, 55, 60, 61, 65, 69
accessories, 61
alarm clock, 70
Bluetooth, 53
camera, 34
convenience, 57
date and time, 57
display, 55
messages, 43
network, 62
phone information, 66
picture, 34
quick alarm, 70
scheduler, 69
security, 65
sounds, 53
voice commands, 60, 82
world clock, 72
settings menu, 50
shortcuts, 81
shuffle, 53, 55
shutter sound, 35
signature, 44
silence all, 54
silencing, 19
silent mode, 53
slide interval, 39
slides, 41
slideshow, 75
smart sound, 54
software
build information, 66
software build, 66
sounds, 53, 54, 55, 61
flip closed, 54
flip open, 54
keypad, 54
playback tools, 79
playing, 78
power on and off, 54
ringers, 53
settings, 53
silence all, 54
volume, 54
speakerphone, 19, 54
volume, 54
speed, 19
com port, 62
dialing, 19
speed dial list, 29
stopwatch, 71
street addresses, 29, 30
support, customer, 83
symbols, 22
T
taking, 34
taking pictures, 34, 38
T-coil hearing aid, 62
94
teletype, 62
text, 22
text entry, 21
capitalization, 22
changing modes, 22
current mode, 21
default mode, 45
letters, 21
numbers, 21
quick reference, 22
rapid entry, 21
text message, 37
text messages, 36, 37, 38, 41, 46
callback number, 37
creating, 36
enhanced options, 36, 38
erasing, 41
forwarding, 37
icon, 37
locking, 38, 41
notification, 37
options, 36
quicktext, 36
replying, 37
request read receipt, 46
request receipt, 37, 46
retrieving, 37
saving, 37
send later, 37
sender information, 38
set priority, 37
validity period, 37
viewing, 37
themes, 56
time calls, 59
time stamp, 34
time/date format, 57
timer, 71
tip calculator, 70
tone, 35
tone length, 55
tones, 55
tools, 67
alarm clock, 69
calculator, 70
memopad, 71
scheduler, 67
stopwatch, 71
timer, 71
tip calculator, 70
voice memo, 67
world clock, 72
training, 61
TTY device, 62
turning on, 51
turning on and off, 18
type, 53
U
unable to send, 42
user guide, 66
using, 32, 46
groups, 32, 46
V
validity period, 37
text message, 37
vibrating, 54
vibrating call alerts, 54
viewing, 37, 40, 48
viewing all, 27
viewing contacts, 27
viewing events, 68
viewing, messages, 44
voice
User Guide 95
answer, 60
dial list, 80
privacy, 63
training, 61
wake-up, 61
voice answer, 60
voice commands, 60, 80, 81, 82
calling contacts, 81
calling numbers, 81
display results, 60
expert mode, 60
find contacts, 81
settings, 60
shortcuts, 81
training, 61
voice dial list, 60, 80
voice dialing
activating, 19
adding contacts, 80
automated lists, 60
digit lengths, 60
removing contacts, 80
voice list, 80
voice memo, 67
voice memos, 67
assigning, 67
erasing, 67, 78
locking, 67, 78
playing, 67
recording, 67
sending, 67, 78
voice search, 81
voice wake-up, 61
voicemail, 41, 43
alerts, 43
number, 46
volume, 54
adjusting, 19
earpiece, 54
keypad, 54
ringers, 54
smart sound, 54
speakerphone, 54
W
wake-up, 61
wallpapers, 55
erasing, 76
locking, 76
sending, 76
web
addresses, 30
alerts, 64
browser, 24
web addresses, 30
web addresses, contacts, 29, 30
white balance, 35
world clock, 72
searching, 72
96
User Guide 97
Backmatter
Kyocera Wireless Corp.
www.kyocera-wireless.com
82-N0247-1EN, Rev. 001-DRAFT