Kyocera SCP-6750 Cellular/ PCS CDMA Phone with Bluetooth User Manual Sprint UG 7b
Kyocera Corporation Cellular/ PCS CDMA Phone with Bluetooth Sprint UG 7b
Kyocera >
Users Manual
User Guide
www.sprint.com
©2008 Sprint. Sprint and the logo are trademarks of Sprint. Other
marks arethe property of their respective owners. SANYO is a registered
trademark of SANYO Electric Co., Ltd. and used under license.
KATANA®Eclipse by SANYO®
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . .i
YourPhone’s Menu . . . . . . . . . . . . . . . . . . . .ii
Section 1: Getting Started . . . . . . . . . . . . . .1
1A. Setting Up Service . . . . . . . . . . . . . . . . . . . . .2
Setting Up Your Phone . . . . . . . . . . . . . . . . . . . . . . .2
Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . .3
Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . .4
Sprint Account Passwords . . . . . . . . . . . . . . . . . . . .4
Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Section 2: Your Phone . . . . . . . . . . . . . . . . .7
2A. Phone Basics . . . . . . . . . . . . . . . . . . . . . . . . .8
Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Viewing the Display Screen . . . . . . . . . . . . . . . . . .11
Features of Your Phone . . . . . . . . . . . . . . . . . . . . .13
Turning Your Phone On and Off . . . . . . . . . . . . . .15
Using Your Phone’s Battery and Charger . . . . . .16
Navigating Through Phone Menus . . . . . . . . . . . .18
Displaying Your Phone Number . . . . . . . . . . . . . .19
Making and Answering Calls . . . . . . . . . . . . . . . .20
Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Using Maps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
2B. Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Location Settings . . . . . . . . . . . . . . . . . . . . . . . . . .43
Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . .43
Airplane Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
TTY Use With Sprint Service . . . . . . . . . . . . . . . . .47
Phone Setup Options . . . . . . . . . . . . . . . . . . . . . . .49
2C. Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Accessing the Security Menu . . . . . . . . . . . . . . . .53
Using Your Phone’s Lock Feature . . . . . . . . . . . . .54
Restricting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Using Special Numbers . . . . . . . . . . . . . . . . . . . . .56
Deleting Phone Content . . . . . . . . . . . . . . . . . . . . .56
Resetting Phone Content . . . . . . . . . . . . . . . . . . .57
Security Features for Sprint Power Vision . . . . . .58
2D. Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Understanding Roaming . . . . . . . . . . . . . . . . . . . .60
Setting Your Phone’s Roam Mode . . . . . . . . . . . .61
Using Call Guard..........................62
Using Data Roam Guard . . . . . . . . . . . . . . . . . . . .63
2E. History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Viewing History . . . . . . . . . . . . . . . . . . . . . . . . . . .64
History Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
History Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
History Menu Options . . . . . . . . . . . . . . . . . . . . . .66
Making a Call From History . . . . . . . . . . . . . . . . . .66
Saving a Phone Number From History . . . . . . . .67
Prepending a Phone Number From History . . . .67
Deleting History . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
2F. Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
About Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Creating a New Contacts Entry . . . . . . . . . . . . . . .69
Finding Contacts Entries . . . . . . . . . . . . . . . . . . . .70
Contacts Entry Options . . . . . . . . . . . . . . . . . . . . .72
Editing a Contacts Entry . . . . . . . . . . . . . . . . . . . . .73
Secret Contacts Entries . . . . . . . . . . . . . . . . . . . . .76
Dialing Sprint Services . . . . . . . . . . . . . . . . . . . . . .77
Wireless Backup . . . . . . . . . . . . . . . . . . . . . . . . . . .77
2G. Calendar and Tools . . . . . . . . . . . . . . . . . . .80
Using Your Phone’s Calendar . . . . . . . . . . . . . . . .80
Using Your Phone’s Alarm Clock . . . . . . . . . . . . .84
Using Your Phone’s Tools . . . . . . . . . . . . . . . . . . .84
2H. Voice Services . . . . . . . . . . . . . . . . . . . . . . .86
Using Automatic Speech Recognition (ASR) . . .86
Voice and Call Recording . . . . . . . . . . . . . . . . . . .89
Setting Up Screen Call . . . . . . . . . . . . . . . . . . . . . .91
2I. microSD Card . . . . . . . . . . . . . . . . . . . . . . . .94
Using Your Phone’s microSD Card and Adapter
..94
File Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
microSD Settings . . . . . . . . . . . . . . . . . . . . . . . . . .99
microSD Folders . . . . . . . . . . . . . . . . . . . . . . . . . .100
Backing Up Your Contacts Data to the
microSD Card............................100
Setting Up the Digital Print Order Format . . . . . .101
Connecting Your Phone to Your Computer . . . .102
2J. Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
Taking Photos . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
Recording Videos . . . . . . . . . . . . . . . . . . . . . . . . .110
Storing Photos and Videos . . . . . . . . . . . . . . . . .113
Sending Sprint Picture Mail . . . . . . . . . . . . . . . . .115
Managing Sprint Picture Mail . . . . . . . . . . . . . . .117
Printing Photos Directly From Your Phone . . . .119
2K. Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . .121
Turning Bluetooth On and Off . . . . . . . . . . . . . . .121
Using the Bluetooth Menu . . . . . . . . . . . . . . . . . .122
Using the Bluetooth Settings Menu . . . . . . . . . .124
Bluetooth Profiles . . . . . . . . . . . . . . . . . . . . . . . . .124
Pairing Bluetooth Devices . . . . . . . . . . . . . . . . . .126
Using the Trusted Devices Options . . . . . . . . . .126
Printing Data via Bluetooth . . . . . . . . . . . . . . . . .127
Sending Data via Bluetooth . . . . . . . . . . . . . . . .128
Section 3: Sprint Service . . . . . . . . . . . . .129
3A. Sprint Service Features: The Basics . . .130
Using Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . .130
Using SMS Text Messaging . . . . . . . . . . . . . . . . .136
Using SMS Voice Messaging . . . . . . . . . . . . . . .137
Using Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . .138
Responding to Call Waiting . . . . . . . . . . . . . . . .139
Making a Three-Way Call . . . . . . . . . . . . . . . . . .139
Using Call Forwarding . . . . . . . . . . . . . . . . . . . . .140
3B. Sprint Power Vision . . . . . . . . . . . . . . . . . .141
Sprint Power Vision Applications . . . . . . . . . . . .141
Getting Started With Sprint Power Vision . . . . .142
Accessing Messaging . . . . . . . . . . . . . . . . . . . . .146
Downloading Content . . . . . . . . . . . . . . . . . . . . .149
Exploring the Web . . . . . . . . . . . . . . . . . . . . . . . .151
Phone as Modem . . . . . . . . . . . . . . . . . . . . . . . . .154
Sprint Power Vision FAQs . . . . . . . . . . . . . . . . . .156
3C. Entertainment: Sprint TVand
Sprint Music . . . . . . . . . . . . . . . . . . . . . . . .158
Sprint TV ................................158
The Sprint Music Store . . . . . . . . . . . . . . . . . . . .162
Sprint Music Manager . . . . . . . . . . . . . . . . . . . . .165
Streaming Music . . . . . . . . . . . . . . . . . . . . . . . . .167
Section 4: Safety and
Warranty Information . . . . . . . . . . . . . . . .169
4A. Important Safety Information . . . . . . . . .170
General Precautions . . . . . . . . . . . . . . . . . . . . . .170
Maintaining Safe Use of and Access to
Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171
Using Your Phone With a Hearing Aid Device . .172
Caring for the Battery . . . . . . . . . . . . . . . . . . . . . .174
Radio Frequency (RF) Energy . . . . . . . . . . . . . . .175
Owner’s Record . . . . . . . . . . . . . . . . . . . . . . . . . .177
User Guide Proprietary Notice . . . . . . . . . . . . . .177
4B. Manufacturer’s Warranty . . . . . . . . . . . . .178
Manufacturer’s Warranty . . . . . . . . . . . . . . . . . . .179
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182
i
Introduction
This UserGuide introduces you to Sprint®service and all
the features of yournew phone. It’s divided into four
sections:
ࡗSection 1: Getting Started
ࡗSection 2: Your Phone
ࡗSection 3: Sprint Service
ࡗSection 4: Safety and Warranty Information
Throughout this guide, you’ll find tips that highlight
special shortcuts and timely reminders to help you
make the most of your new phone and service. The
Table of Contents and Index will also help you
quickly locate specific information.
You’ll get the most out of yourphone if you read
each section. However, if you’d like to get right to a
specific feature, simply locate that section in the
Table of Contents and go directly to that page.
Follow the instructions in that section, and you’ll be
ready to use yourphone in no time.
WARNING Please refer to the Important Safety
Information section on page 170 tolearn
about information that will help you safely
use your phone. Failure to read and follow
the Important Safety Information in this
phone guide may result in serious bodily
injury, death, or property damage.
User
Guide
Note
Because of updates in phone software, this
printed guide may not be the most current
version for your phone. Visit www.sprint.com
and log on to My Sprint Wireless to access
the most recent version of the user guide.
Your Phone’s Menu
The following table outlines yourphone’s list menu
structure. Formore information about using your phone’s
menus, see “Navigating Through Phone Menus”on
page 18.
5: Missed Alerts
6: My Stuff
1: Games
1: Get New 2: My Content Manager
2: Ringers
1: Get New 2: My Content Manager
3: Screen Savers
1: Get New 2: My Content Manager
4: Applications
1: Get New 2: My Content Manager
5: IM & Email
1: Get New 2: My Content Manager
6: Call Tones
1: Web
2: Maps
1: Navigation
2: Family Locator
3: Live Local Search
3: Entertainment
1: Music
2: TV
3: Games
4: History
ii
iii
7: Settings & Info
1: Auto Save to 2: Location
3: Status Bar 4: Slideshow Intvl
5: Account Info 6: Help
8: Messages
1: Voicemail
1: Call Voicemail 2: Call: SpeakerOn
3: Details 4: Reset Indicator
2: Send Message
1:Text Message 2: Picture Mail
3:VoiceSMS 4: Email
3: Text
4: Picture Mail
5: Email
6: IM
7: VoiceSMS
8: Chat & Dating
7: Photos
1: Camera
Press the right softkey for the following options:
1. Picture Mode 2. Zoom
3. Self-Timer 4. Fun Tools
5. Image Controls 6. Camera Settings
7. Review Media 8. Camcorder Mode
9. Key Guidance 0. User Settings
2: Camcorder
Press the right softkey for the following options:
1. Video Mode 2. Zoom
3. Self-Timer 4. Color Tone
5. Image Controls 6. Video Settings
7. Review Media 8. Camera Mode
9. Key Guidance 0. User Settings
3: Picture Mail
4: My Albums
1: In Phone 2: In microSD
3: Online Albums
5: PictBridge
6: OrderPrints
9: Contacts
0: Settings
1: Display
1: Main Screen
1: Screensaver 2: Animation
3: Backlight 4: Input Font
5: Foregrounds 6: Sleep Mode
2: OuterScreen
1: Screensaver 2. Animation
3: Backlight 4: Background
5: Foreground 6: Sleep Mode
7: Next Schedule
3: Contrast
4: Font Size
1: Main Screen 2: Outer Screen
5: Keypad Light
6: Language
1: English 2: Español
7: Pwr Save Mode
9: Settings
1: Notification
1: Msgs and Icon 2: Icon Only
2: Msg Reminder
1:Text Message 2: Picture Mail
3:Voicemail 3: VoiceSMS
5: Email
3: Callback Number
1: None 2: My Phone#
3: Other
4: Auto-Delete
5: Signature
6: Preset Msgs
7: Drafts Alert
8: VoiceSMS Options
1: Speakerphone 2: From Name
3: Connect. Alert
iv
6: Vibrate Type
1: Incoming Calls 2: Messages
3: Alarm 4: Schedule
3: Illumination
1: On/Off
2: Incoming Calls
3: Messages
4: Calendar/Alarm
5: Active Call
6: Playing Music
7: Numeric Keypad
8: Demo
4: Bluetooth
1: On/Off
2: Visibility
8: Return to Idle
1: Automatically 2: End Key
2: Sounds
1: Volume
1: Ringer 2: Earpiece
3: Headset 4: Speakerphone
5: Applications 6: StartUp/PwrOff
7: Advanced...
2: RingerType
1: Incoming Calls 2: Messages
3: Alarm 4: PowerOn
5: PowerOff 6: Schedule
3: Alerts
1: Beep Each Minute 2: Out of Service
3: Connect 4: Signal Fade/Call Drop
5: Messages
4: Keytones
1:Tone Length 2: Tone Volume
3:Tone Type
5: Voice Guide
v
8: VoiceSMS Options
1: Speakerphone 2: From Name
3: Connect. Alert
6: Text Entry
1: Auto-Capital 2: Auto-Space
3: Input Language 4: My Words
5:T9 Settings 6: Default Input
7: Add Word 8: Auto-Complete
9: Help
7: Phone Info
1: Phone#/User ID 2: Icon Glossary
3:Version 4: Advanced
5: My Account
8: More...
1: Accessibility
1:TTY 2: Input Font
3: Font Size 4: Vibrate Type
2: Airplane Mode
3: Browser
1: Bookmarks 2: Delete Web Cache
3: Delete Web Cookies 4: Edit Home Page
3: Device Name
4: Device Info
5: Trusted List
6: Voice Priority
7: Exchange Folder
5: Messages
1: Notification
1: Msgs and Icon 2: Icon Only
2: Msg Reminder
1:Text Message 2: Picture Mail
3:Voicemail 4: VoiceSMS
5: Email
3: Callback Number
1: None 2: My Phone#
3: Other
4: Auto-Delete
5: Signature
6: Preset Msgs
7: Drafts Alert
vi
#:Security
1: Lock My Phone 2: Change Code
3: Special Numbers 4: Edit Contacts List
5: Delete/Reset
:Navigation Keys (Default Settings)
1:
Left Navigation (Sprint TV)
2: Right Navigation (Web)
3:
Up Navigation (Send Text)
4: Down Navigation (My Stuff)
:Key Guard
:Wireless Backup
(Before subscribing)
1: Subscribe 2: Learn More
(After subscribing)
1: Alert 2: View Status
3: Troubleshoot 4: Learn More
5: Unsubscribe
*:Tools
1: Alarm Clock
2: Assigned Media
4: Call Setup
1: Call Answer 2: Auto-Answer
3: Abbrev. Dial 4: Contacts Match
5: Contacts
1: Speed Numbers 2: Show Secret/Hide Secret
3: My Name Card 4: Services
5: Wireless Backup
6: Data
1: Enable/Disable Data 2: Net Guard
3: Update Profile
7: Headset Mode
1:Turbo Button 2: Earpiece
3: Ringer Sound
8: Location
9: PowerOn to Alert
0: Restrict and Lock
1:Voice 2: Data
3: Camera/Pictures 4: Lock My Phone
*:Roaming
1: Set Mode 2: Call Guard
3: Data Roaming
vii
viii
#: Get Stuff
In Use Menu
Press Options (right softkey) to display the following
options:
1. Three-Way Call 2. Save/Contact Details
3. Contacts 4. Call Memo Rec.
5: Phone Info 6: Main Menu
3: Bluetooth
1: Handsfree Pairing 2: Send Contact
3: Print Picture 4: Add to Trusted
5:Trusted List 6: Send BizCard
7: More...
4: Calculator
5: Calendar
6: Countdown
7: File Manager
1: Phone 2: microSD
3: microSD Options
8: Mass Storage
9: Stopwatch
0: Transfer Music
*:Update Firmware
#:Voice Memo
1: Record2: List
3: Screen Call
:World Clock
Section 1
Getting Started
2 Section 1A. Setting Up Service
Section 1A
Setting Up Service
ࡗSetting Up YourPhone (page 2)
ࡗActivating Your Phone (page 3)
ࡗSetting Up YourVoicemail (page 4)
ࡗSprint Account Passwords (page 4)
ࡗGetting Help (page 5)
Setting up service on your new phone is quick and easy. This
section walks you through the necessary steps to set up
and turn on yourphone, set up yourvoicemail, establish
passwords, and contact Sprint for assistance with your
Sprint service.
Setting Up YourPhone
1. Install the battery.
ⅢPress the release button and remove the battery
cover from the back of the phone.
ⅢInsert the battery into the opening, making sure
the connectors align. Gently press down to secure
the battery.
ⅢReplace the battery coverand slide it upward until
you heara click.
2. Press to turn the phone on.
ⅢIf yourphone is activated, it will turn on, search for
Sprint service, and enter standbymode.
ⅢIf yourphone is not yet activated, see “Activating
Your Phone” on page 3 for more information.
3. Make your first call.
ⅢUse yourkeypad to enter a phone number.
ⅢPress .
Section 1A. Setting Up Service 3
Activating Your Phone
There are three basic scenarios for activating yournew
phone:
A. You purchased your phone at a Sprint Store. It is probably
activated and ready to use.
B. You received yourphone in the mail, and it is a new Sprint
account oranew phone number.Your phone is
designed to activate automatically when you first turn
it on. Toconfirm youractivation, make a phone call.
C. You received your phone in the mail and you are switching
numbers from a previous Sprint phone to the new phone.
You need to contact Sprint to activate the numberon
yournew phone. There are two options for activation
in this instance:
ⅢFrom yourcomputer’s Web browser, go to
www.sprint.com/activate and complete the
onscreen instructions to activate your phone.
Contact Sprint Customer Service at 1-888-211-
4727 for assistance with activation.
When you have finished, make a phone call to
confirm your activation.
Note If you are having difficulty with activation, contact
Sprint CustomerService by dialing 1-888-211-
4727 from any otherphone.
Tip Do not press END while the phone is being
activated. Pressing END cancels the activation
process.
Note Your phone’s battery should have enough charge
for your phone to turn on and find a signal, set up
your voicemail, and make a call. You should fully
charge yourbattery as soon as possible. See
“Charging the Battery”on page 17 fordetails.
Setting Up Service
4 Section 1A. Setting Up Service
Setting UpYour Voicemail
All unanswered calls to yourphone are automatically
transferred to your voicemail, even if yourphone is in use
or turned off. Therefore, Sprint recommends that you set
up yourvoicemail and personal greeting as soon as
yourphone is activated.
1. From standby mode, press and hold .
2. Follow the system prompts to:
ⅢCreate yourpasscode.
ⅢRecord yourname announcement.
ⅢRecord yourgreeting.
ⅢChoose whether to activate One-Touch Message
Access (a feature that lets you access messages
simply by pressing and holding , bypassing
the need for you to enter your passcode).
Formore information about using your voicemail, see
“Using Voicemail”on page 130.
Sprint Account Passwords
As a Sprint customer, you enjoy unlimited access to
yourpersonal account information, your voicemail
account, and yourSprint Power Vision®account. To
ensure that no one else has access to yourinformation,
you will need to create passwords to protect your privacy.
Account User Name and Password
If you are the account owner, you will create an account
user name and password when you sign on to
www.sprint.com.(Click Need to register for access? to get
started.) If you are not the account owner (if someone
else receives the bill foryour Sprint service), you can get
asub-account password at www.sprint.com.
Note Voicemail Passcode
If you are concerned about unauthorized access to
your voicemail account, Sprint recommends that
you enable your voicemail passcode (do not
activate One-Touch Message Access).
Section 1A. Setting Up Service 5
Voicemail Password
You will create your voicemail password (or passcode)
when you set up your voicemail. See “Setting Up Your
Voicemail” on this page or on page 4 for more
information on yourvoicemail password.
Sprint Power Vision Password
With yourSprint Power Vision phone, you may elect to
set up an optional Sprint Power Vision password to
control Vision access and authorize Premium Service
purchases.
Formore information, orto change your passwords, sign
on to www.sprint.com or call Sprint Customer Service at
1-888-211-4727.
Getting Help
Managing YourAccount
Online: www.sprint.com
ⅷAccess youraccount information.
ⅷCheck yourminutes used (depending on your Sprint
service plan).
ⅷView and pay your bill.
ⅷEnroll in Sprint online billing and automatic payment.
ⅷPurchase accessories.
ⅷShop for the latest Sprint phones.
ⅷView available Sprint service plans and options.
ⅷLearn moreabout Sprint Power Vision and othergreat
products likeSprint Picture Mail, games, ringers,
screen savers, and more.
Setting Up Service
6 Section 1A. Setting Up Service
From Your Sprint Phone
ⅷPress to check minute usage and
account balance.
ⅷPress to make a payment.
ⅷPress to access a summary of your
Sprint service plan or get answers to otherquestions.
From Any OtherPhone
ⅷSprint CustomerService: 1-888-211-4727.
ⅷBusiness Customer Service: 1-800-927-2199.
Sprint 411
Sprint 411 gives you access to a variety of services and
information through yourphone, including residential,
business, and government listings; movie listings or
showtimes; driving directions, restaurant reservations,
and major local event information. You can get up to
three pieces of information per call, and the operator can
automatically connect yourcall at no additional charge.
There is a per-call charge to use Sprint 411, and you will
be billed for airtime.
To call Sprint 411:
ᮣPress .
Sprint Operator Services
Sprint OperatorServices provides assistance when
placing collect calls or when placing calls billed to a
local telephone calling cardor thirdparty.
Toaccess Sprint Operator Services:
ᮣPress .
Formore information orto see the latest in products and
services, visit us online at www.sprint.com.
Section 2
Your Phone
Section 2A
Phone Basics
ࡗYour Phone (page 8)
ࡗViewing the Display Screen (page 11)
ࡗFeatures of Your Phone (page 13)
ࡗTurning Your Phone On and Off (page 15)
ࡗUsing Your Phone’s Battery and Charger (page 16)
ࡗNavigating Through Phone Menus (page 18)
ࡗDisplaying Your Phone Number(page 19)
ࡗMaking and Answering Calls (page 20)
ࡗEntering Text (page 29)
ࡗUsing Maps (page 34)
Your phone is packed with features that simplify your life and
expand your ability to stay connected to the people and
information that are important to you. This section will guide
you through the basic functions and calling features of
your phone.
Your Phone
14. Headset Jack
22. Volume Key
19. Outer Screen 23. Side Camera Key
3. Navigation Key
6. TALK Key
15. Softkeys
4. MENU/OK Key
2. Main Screen
17.
Speaker
1. Earpiece
12. END/POWER Key
13. BACKKey
16.
Camera Lens
18. LED Indicator
11. microSD Slot
20. External Keys
5. Camera Key
7. SPEAKER Key
8. Microphone
10. Keypad
9. Internal Antenna
21. Micro-USB
Connector
8 Section 2A. Phone Basics
Key Functions
1. Earpiece lets you hearthe caller and automated
prompts.
2. Main Screen displays all the information needed to
operate your phone, such as the call status, the
Contacts list, the date and time, and the signal and
battery strength.
3. Navigation Key scrolls through the phone’s menu
options and acts as a shortcut key from standby
mode.
4. MENU/OK Key lets you access the phone’smenus
and selects the highlighted choice when navigating
through a menu.
5. Camera Key lets you access the Photos menu and
take pictures and videos.
6. TALK Key allows you to place or receive calls,
answer Call Waiting, use Three-Way Calling, or
activate Voice Dial.
7. SPEAKER Key lets you place or receive calls in
speakerphone mode or turn the speakerphone on
and off during a call.
8. Microphone allows other callers to hearyou clearly
when you are speaking to them.
9. Internal Antenna facilitates reception and
transmission. To maximize performance, do not
obstruct the internal antenna while using the phone.
(See page 20.)
10. Keypad lets you enter numbers, letters, and
characters and navigate within menus. You can use
the numeric keypad for speed dialing. (See “Using
Speed Dialing” on page 29.)
11. microSD Slot lets you use the included microSD card
to expand the memory of your phone. (See “Using
the microSD Card” on page 94.)
12. END/POWER Key lets you turn the phone on or off,
end a call, or return to standby mode. While in the
main menu, it returns the phone to standby mode
and cancels your input.
Note Your phone comes with the microSD card
preinstalled.
Section 2A. Phone Basics 9
Phone Basics
10 Section 2A. Phone Basics
13. BACK Key deletes characters from the display in text
entry mode. When in a menu, pressing the Back key
returns you to the previous menu. This key also
allows you to return to the previous screen in a
Sprint Power Vision session.
14. Headset Jack allows you to plug in an optional
headset for convenient, hands-free conversations.
CAUTION! Inserting an accessory into the incorrect
jack may damage the phone.
15. Softkeys let you select softkey actions ormenu items
corresponding to the bottom left and right lines on
the Main Screen.
16. Camera Lens,as part of the built-in camera, lets you
takepictures and videos.
17. Speaker lets you hearthe different ringers and
sounds. You can mute the ringer when receiving
incoming calls by pressing or any of the side
keys. The speakeralso lets you hearthe caller’s
voice in speakerphone mode.
18. LED Indicator shows your phone’s connection and
charging status at a glance.
19. Outer Screen lets you monitor the phone’s status and
see who’s calling without opening the phone.
20. External Keys allow you to access the Music Store
and music stored on yourmicroSD card, as well as
navigate through your music while playing a song.
(See page 160.)
21. Micro-USB Connector allows you to connect a USB
cable (included). CAUTION! Inserting an accessory
into the incorrect jack may damage the phone.
22. Volume Key allows you to adjust the ringervolume in
standbymode (with the phone open) or adjust the
voice volume during a call. The volume keycan also
be used to scroll up or down to navigate through the
different menu options.
23. Side Camera Key lets you activate the camera and
video mode and take pictures and videos.
Section 2A. Phone Basics 11
Viewing the Display Screen
Your phone’s display screen provides information about
yourphone’s status and options. This list identifies the
symbols you’ll see on your phone’s display screen:
indicates yourcurrent signal strength. The more
lines you have, the stronger your signal.
indicates you are “roaming”off the Sprint
National Network.
indicates yourphone cannot find a signal.
indicates the call is on hold.
indicates that a call is in progress.
indicates yourSprint Vision connection is active
(data is being transferred).
indicates yourSprint Vision connection is
dormant (no data is being sent or received).
indicates yourphone is not currently able to
access Sprint Vision service features.
indicates Sprint PowerVision status.
(The icon is animated while service is active.)
indicates Sprint PowerVision service is
available.
indicates Sprint PowerVision service is
dormant.
indicates you have missed voice calls.
indicates you have scheduled events or call
alarms.
indicates you have alarm clock or countdown
notifications.
indicates you have new SMS Voice messages.
indicates you have new SMS Text messages.
indicates you have new picture messages.
indicates you have new voicemail messages.
indicates you have new email messages.
Tip To view a list of your phone’s icons and
descriptions, from the main menu select
Settings > Phone Info > Icon Glossary.
Phone Basics
indicates you have more than two different
kinds of messages.
indicates you have urgent messages.
indicates you have two or more different types
of missed calls, scheduled events, call alarms,
or alarm clock orcountdown notifications.
indicates you have a new wireless backup alert.
indicates the Bluetooth featureis enabled
(black icon).
indicates the phone is discoverable by another
Bluetooth device.
indicates the phone is connected to a
Bluetooth device (dimmed icon).
indicates the phone is communicating with a
Bluetooth device.
indicates the phone is connected to or
communicating with a Bluetooth device via
Hands-free Profile (HFP).
indicates the phone is connected to or
communicating with a Bluetooth device via
Advanced Audio Distribution Profile (A2DP).
indicates the phone is connected to or
communicating with a Bluetooth device via
both Hands-free Profile (HFP) and Advanced
Audio Distribution Profile (A2DP).
indicates access to a secure site.
indicates the level of yourbattery charge. The
more black you see, the more power you have
left. (The icon is animated while the battery is
charging.)
indicates yourbattery is charging in “Power Off”
state.
indicates volume level 1 to 8 and vibrate feature
are set.
indicates 1-beep feature is set.
indicates 1-beep and vibrate feature are set.
indicates all ringer settings are off.
indicates all ringer settings are off and the
vibrate featureis set.
12 Section 2A. Phone Basics
indicates all the sound settings except
applications volume are off and the vibrate
feature is set.
indicates all the sound settings are off.
indicates the Location feature of yourphone is
enabled.
indicates the Location feature of yourphone is
disabled.
indicates you have a new voice message when
Screen Call is activated.
indicates the Screen Call Auto setting is on.
indicates yourphone is in TTY mode.
indicates the alarm clock or countdown setting is on.
indicates the speakerphone mode is set to on.
indicates the car kit device is set to on.
indicates the wired headset device is set to on.
indicates a microSD card is inserted in your
phone. (When the microSD card is being
accessed, the icon dims.)
Features of Your Phone
The KATANA®Eclipse by SANYO is lightweight, easy to
use, and reliable, and it offers many features and service
options. This list previews some of those features and
provides page numbers where you can find out more:
ⅷDigital dual-band capability allows you to make and
receive calls while on the Sprint National Network and
to roam on other 1900 and 800 MHz digital networks
where Sprint has implemented roaming agreements
(page 60).
ⅷSprint Power Vision provides access to the wireless
Internet in digital mode (page 141).
ⅷSprint Mail (page 146),SMS Text Messaging (page
136),and SMS Voice Messaging (page 137) provide
quick and convenient messaging capabilities.
ⅷGames, ringers, screen savers, and other applications
can be downloaded to make your phone as unique as
you are (page 149).Additional charges may apply.
ⅷYour Contacts list allows you to storeup to 500 entries,
with up to seven phone numbers per entry (page 69).
Section 2A. Phone Basics 13
Phone Basics
14 Section 2A. Phone Basics
ⅷThe built-in Calendar offers several personal
information management features to help you
manage yourbusy lifestyle (page 80).
ⅷThe Location feature works in connection with
available location-based services (page 43).
ⅷT9 Text Input lets you quickly type messages with one
keypress per letter (see page 30).
ⅷSpeed dial lets you dial phone numbers with one or
two keypresses (see page 29).
ⅷThe built-in camera allows you to take full-color digital
pictures and videos, view yourpictures and videos
using the phone’s display, and instantly send them to
family and friends using Sprint Picture Mail service
(page 104).
ⅷThe File Manager allows you to manage multiple files
in the phone and microSD card (page 97).
ⅷPictBridge support lets you connect and print to any
PictBridge compliant printer (page 119).
ⅷSprint TV and Sprint Music allow you to enjoy streaming
video and audio with yourphone (page 158).
ⅷThe included microSD memory cardallows you to
expand the phone’s available memory (page 94).
ⅷThe built-in Bluetooth technology allows you to
connect wirelessly to a number of Bluetooth devices
to share information more easily than ever before
(page 121).
ⅷThe Maps feature allows you to launch Sprint
navigation services (page 34).
Section 2A. Phone Basics 15
Turning Your Phone On and Off
Turning Your Phone On
ᮣPress .
Once yourphone is on and finds a signal, it
automatically enters standby mode – the phone’s idle
state. At this point, you are ready to begin making and
receiving calls.
If yourphone is unable to find a signal afterfive seconds
of searching, a PowerSave feature is automatically
activated. When a signal is found, your phone
automatically returns to standby mode.
In PowerSave mode, yourphone searches fora signal
periodically without yourintervention. You can also
initiate a search for Sprint service by pressing any key
(when yourphone is turned on).
Turning Your Phone Off
ᮣPress and hold for two seconds until you see
the powering down animation on the display
screen.
Your screen remains blank while your phone is off
(unless the battery is charging).
Tip The Power Save featureconserves your battery
power when you are in an area where there is no
signal.
Phone Basics
16 Section 2A. Phone Basics
Using Your Phone’s Battery and
Charger
Sprint-approved or manufacturer-approved batteries
and accessories can be found at Sprint Stores or
through the manufacturer; orcall 1-866-343-1114 to
order.They’re also available at www.sprint.com.
Battery Capacity
Your phone is equipped with a Lithium Ion (Li-Ion)
battery. It allows you to recharge yourbattery before it is
fully drained. The battery provides up to 4.6 hours of
continuous digital talk time.
When there are approximately five minutes of talk time
left, the phone sounds an audible alert and then
turns off.
Tip Watch your phone’s battery level indicator and
charge the battery before it runs out of power.
Note Long backlight settings, searching for service,
vibratemode, browser use, and other variables may
reduce the battery’s talk and standby times.
WARNING Use only Sprint-approved or manufacturer-
approved batteries and chargers with your
phone. The failure to use a Sprint-approved
or manufacturer-approved battery and
charger may increase the risk that your
phone will overheat, catch fire, or explode,
resulting in serious bodily injury, death, or
property damage.
Section 2A. Phone Basics 17
Installing the Battery
1. Insert the battery into the opening on the back of the
phone, making sure the connectors align (1). Gently
press down to secure the battery (2).
2. Replace the battery coverand slide it upward until
you heara click (3).
Removing the Battery
1. Make sure the power is off so that you don’t lose any
stored numbers or messages.
2. Press the battery release latch (1) and slide the
battery cover downwardand remove it (2).
3. Lift up the battery and remove it from the phone (3).
Charging the Battery
Charge your battery as soon as possible so you can
begin using your phone.
Keeping track of your battery’s charge is important. If
yourbattery level becomes too low, yourphone
automatically turns off, and you will lose any information
you were just working on. For a quick check of your
battery level, glance at the battery charge indicator
located in the upper-right corner of your phone’s display
screen. If the battery charge is getting too low, the battery
icon ( ) blinks and the phone sounds a warning tone.
Always use a Sprint-approved or manufacturer-
approved desktop charger, travel charger, or vehicle
power adapterto charge your battery.
3
2
1
WARNING Do not handle a damaged or leaking
Li-Ion battery as you can be burned.
3
2
1
Phone Basics
18 Section 2A. Phone Basics
Using the Phone Charger
1. Plug the phone charger into a wall outlet.
2. Open the micro-USB connector cover located on
the upper left side of yourphone.
3. Plug the other end of the phone charger into the
micro-USB connector.
ⅢAred indicator light means the battery is charging.
ⅢAgreen indicator light means the battery charging
is completed.
With the Sprint-approved Li-Ion battery, you can
recharge the battery before it becomes completely run
down.
Navigating Through Phone
Menus
The navigation key on yourphone lets you scroll through
menus quickly and easily. The scroll bar at the right of
the menu keeps track of your position in the menu at all
times.
To navigate through a menu, press the navigation key
up or down. If you are in a first-level menu, such as
Settings, you mayalso navigate to the next orprevious
first-level menu by pressing the navigation key right or
left.
Fora diagram of your phone’s menu, please see “Your
Phone’s Menu”on page ii.
Section 2A. Phone Basics 19
Selecting Menu Items
As you navigate through the menu, menu options are
highlighted. Select any option by highlighting it and
pressing .If the option is numbered, you can select it
by pressing the corresponding numberon the phone’s
keypad.
Forexample, to view your text messages:
1. Press to access the main menu.
2. Select Messages by highlighting it and pressing .
3. Select Text byhighlighting it and pressing .
4. Select Inbox by highlighting it and pressing .
(If you have any text messages, they are displayed.)
Backing Up Within a Menu
To go to the previous menu:
ᮣPress .
To return to standby mode:
ᮣPress .
DisplayingYour Phone Number
ᮣPress Menu > Settings > Phone Info > Phone#/User ID.
(Your phone number and other information about
yourphone and account will be displayed.)
Note For the purposes of this guide, the above steps
condense into “Press Menu > Messages > Text >
Inbox.”
Phone Basics
20 Section 2A. Phone Basics
Making and Answering Calls
Holding Your Phone
To maximize performance, do not obstruct the internal
antenna area.
Making Calls
Placing a call from yourwireless phone is as easy as
making a call from any landline phone. Enterthe
number, press , and you’re on your way to clearcalls.
1. Makesure your phone is on.
2. Enter a phone numberfrom standby mode. (If you
make a mistake while dialing, press to erase the
numbers.)
3. Press . (To make a call when you are roaming
and Call Guardis enabled, see “Using Call Guard”
on page 62.)
4. Press or close the phone when you are finished.
You can also place calls from your phone by speed
dialing numbers from yourContacts (page 29) and by
using yourHistory listings (page 66).
Tip To redial your last outgoing call, press TALK twice.
When making calls off the Sprint National Network,
always dial using 11 digits (1+area code + phone
number).
Correct Incorrect
Internal Antenna
Section 2A. Phone Basics 21
Dialing Options
When you enternumbers in standby mode, you will see
avariety of dialing options by pressing Options (right
softkey).
Toinitiate an option, highlight it and press .
ⅷAbbrev. Dial: Place call using the abbreviated dialing
feature. (See “Using Abbreviated Dialing”on
page 27.)
ⅷSave: Save the phone number in yourContacts. (See
“Saving a Phone Number”on page 26.)
ⅷHard Pause: Insert a hardpause. (See “Dialing and
Saving Phone Numbers With Pauses” on page 26.)
ⅷ2-Sec. Pause: Insert a two-second pause. (See
“Dialing and Saving Phone Numbers With Pauses” on
page 26.)
Answering Calls
1. Make sure your phone is on. (If your phone is off,
incoming calls go to voicemail.)
2. Press to answer an incoming call.
(Depending on yoursettings, you may also answer
incoming calls byopening the phone orby
pressing any numberkey. See “Call Answer Mode”
on page 49 for more information.)
Toanswer an incoming call with the phone closed:
1. Make sure your phone is on. (If your phone is off,
incoming calls go to voicemail.)
2. When yourphone rings or vibrates, press and hold
the volume key on the left side of the phone. (The
call will be answered in speakerphone mode.)
–or –
Open the phone to use the earpiece.
Phone Basics
22 Section 2A. Phone Basics
Your phone notifies you of incoming calls in the
following ways:
ⅷThe phone rings or vibrates.
ⅷThe indicator light flashes.
ⅷThe backlight illuminates.
ⅷThe screen displays an incoming call message.
If the incoming call is from a number stored in your
Contacts, the entry’s name is displayed. The caller’s
phone number may also be displayed, if available.
When receiving a call, the following options are also
displayed bypressing Options (right softkey).
ⅷCall Guard to answer the call when you are in roaming
mode. (See “Using Call Guard” on page 62.)
ⅷAnswer or Answer:Speaker to answerthe call.
ⅷAnsweron Hold to put the call on hold.
ⅷScreen Call to answer the call by using a prerecorded
announcement. (See “Setting Up Screen Call”on
page 91.)
ⅷQuiet Ringer to mute the ringer (if available).
ⅷStop Vibration to turn vibration off when yourringer
setting is in vibrate mode.
ⅷIgnore with Text to not answer the call and send a text
message to the caller.
Answering a Roam Call With Call Guard
Enabled
Call Guard is an option that helps you manage your
roaming charges when making orreceiving calls while
outside the Sprint National Network. Please see
“Roaming” on page 60 for more information about
roaming.
ᮣTo answer the call, press , and then press to
proceed. (See “Using Call Guard” on page 62 for
additional information.)
Ending a Call
ᮣClose the phone or press .
Note When your phone is off, calls go directly to
voicemail.
Section 2A. Phone Basics 23
Missed Call Notification
When an incoming call is not answered, the Missed Call
log is displayed on your screen.
To display the Missed Call entry from the notification
screen:
ᮣSelect the entry and press . (To dial the phone
number, press .)
To display a Missed Call entry from standby mode:
1. Press Menu > Missed Alerts.
2. Select the entry you wish to view and press .
Calling Emergency Numbers
You can place calls to 911 (dial ), even if
yourphone is locked or your account is restricted.
During an emergency call, press Options (right softkey)
to display your options. Select an option and press .
ⅷSpeakerOn to activate speakerphone mode. (If you are
in speakerphone mode, the option is displayed as
SpeakerOff to deactivate.)
ⅷUnlock My Phone to unlock your phone (appears only if
the phone is locked).
Tip Press My Phone (left softkey) to display your phone
number during an emergency call.
Note When you place an emergency call, your phone
automatically enters Emergency mode.
Phone Basics
24 Section 2A. Phone Basics
To exit Emergency mode:
1. Press to end a 911 call.
2. Press Options (right softkey) to display the options
menu.
3. Select Exit Emergency and press .
To select Emergency mode options:
1. Press to end a 911 call.
2. Press Options (right softkey).
ⅢCall 911 to call 911.
ⅢCall 911: Speaker to call 911 in speakerphone
mode.
ⅢExit Emergency to exit Emergency mode.
3. Select an option and press .
Enhanced 911 (E911) Information
This phone features an embedded Global Positioning
System (GPS) chip necessary forutilizing E911
emergency location services where available.
When you place an emergency 911 call, the GPS
featureof yourphone seeks information to calculate
yourapproximate location. Depending on several
variables, including availability and access to satellite
signals, it maytake up to 30 seconds ormore to
determine and report yourapproximate location.
IMPORTANT Always report yourlocation to the 911
operator when placing an emergencycall.
Some designated emergency call takers,
known as Public Safety Answering Points
(PSAPs) may not be equipped to receive
GPS location information from your phone.
Note When you are in Emergency mode, you can exit
from the options menu.
Section 2A. Phone Basics 25
In-Call Options
Pressing Options (right softkey) during a call displays a
list of available in-call features. To select an option, press
the corresponding keypad number or select the option
and press . The following options may be available
through the Options menu:
ⅷThree-Way Call to open a call with two other parties.
ⅷSave to save the current call’s phone number in
yourContacts.
ⅷContact Details to displayinformation about a caller
who is already in your Contacts.
ⅷContacts to display your Contacts list.
ⅷCall Memo Rec. to record the other party.
ⅷPhone Info to access the Phone Info menu.
ⅷTransferAudio to switch the call to an external device.
ⅷMain Menu to display the phone’s main menu.
Press either the left softkey orthe side camera key
during a call to mute the microphone. Press either again
to unmute the microphone.
End-of-Call Options
After you havefinished yourcall, the phone will display
the Recent History. From the Recent History,you can
view the date and time of the call, the phone number (if
available),the entry name (if the number is already in
your Contacts),and the duration of the call.
ᮣPress Options (right softkey) to display the Recent
History options. (See “History Menu Options”on
page 66 for details.)
ᮣPress Send Msg (left softkey) to send a text or an
SMS Voice message.
Note You can turn the speakerphone on or off by
pressing the SPEAKER key during a phone call.
WARNING Because of higher volume levels, do not
place the phone near your ear during
speakerphone use.
Note You can return to the in-call screen by pressing the
TALK during a phone call.
Phone Basics
26 Section 2A. Phone Basics
Saving a Phone Number
Your phone can store up to 500 Contacts entries.
Contacts can store up to a total of 700 phone numbers,
and each Contacts entry’s name can contain up to 64
characters. Your phone automatically sorts the Contacts
entries alphabetically. (For more information, see
“Contacts” on page 69.)
To save a number from standby mode:
1. Enter aphone number and press Options (right
softkey) > Save.
2. Select New Entry or Existing Entry and press .
3. If New Entry was selected, select a number type, and
then use the keypad to enter the new entry name
and press .
–or –
If Existing Entry was selected, select an existing entry
to which you want to save the number, and then
select a number type and press .
4. Press Done (leftsoftkey) to save the entry.
Finding a Phone Number
You can search Contacts entries for phone numbers
that contain a specific string of numbers.
1. Enter the last three or more digits of the number in
standbymode. (The more numbers you enter, the
morespecific the search becomes.)
2. All Contacts entries matching the entered numbers
will be displayed. Select an entry and press to
dial the number.
Dialing and Saving Phone Numbers With
Pauses
You can dial or save phone numbers with pauses for
use with automated systems, such as voicemail orcredit
cardbilling numbers.
There are two types of pauses available on yourphone:
ⅷHard Pause sends the next set of numbers when you
press .
ⅷ2-Sec. Pause automatically sends the next set of
numbers after two seconds.
Section 2A. Phone Basics 27
To dial or save phone numbers with pauses:
1. Enter all orpart of a number.
2. Press Options (right softkey) > Hard Pause or
2-Sec. Pause.
3. Enter additional numbers.
4. Press to dial the number.
–or–
Press Options (right softkey) > Save to save the
number in your Contacts.
Using Abbreviated Dialing
Abbreviated Dialing is similarto speed dialing. You can
use either of the following abbreviated dialing features.
ⅷContacts Match – Retrieve any number saved in your
Contacts by entering only the last three to six digits of
the number. Press to dial the retrieved number.
(See “To activate the Contacts Match feature” on
page 50.)
ⅷPrepend –P
repend the first five orsix digits (for
example, the area code and prefix) to any four or five
digits you enter.Pres
s
to dial the resulting number.
(See page 50 to activate the Prepend feature.)
Toplace a call using Contacts Match Abbreviated Dialing:
1. Enter the last three to six digits of a Contacts entry’s
phone number.
2. Press to call the displayed number. (If there is
more than one matched number in your Contacts,
the Abbrev. Dial list is displayed. Select the name
you want to call from the list, and then press to
place a call.)
Note When dialing a number with a hard pause, press
TALK to send the next set of numbers.
Note You can have multiple pauses in a phone number
and combine two-second and hard pauses.
Phone Basics
28 Section 2A. Phone Basics
To place a call using Prepend Abbreviated Dialing:
1. Enter the last fouror five digits of the number.
2. Press .
Dialing From the Contacts List
1. Press Menu > Contacts.
2. Select the entry you want to call and press to
dial the entry’s default phone number.
–or–
To dial another number from the entry, select the
name and press , and then select a number and
press .
Plus (+)Code Dialing
When placing international calls, use Plus Code Dialing
to automatically enter the international access code for
yourlocation (for example, 011 for international calls
made from the United States). This feature is subject to
network availability.
1. Press and hold until a “+” is displayed on your
phone screen.
2. Dial the country code and phone number you’re
calling, and press . (The access code for
international dialing will automatically be dialed,
followed by the country code and phone number.)
Section 2A. Phone Basics 29
Using Speed Dialing
You can store up to 98 numbers in your phone’s speed
dial memory to make contacting friends and family as
easy as pressing a button or two. With this feature, you
can dial speed dial entries using one keypress for
locations 2–9 or two keypresses for locations 10–99.
To use One-Touch Dialing for speed dial locations 2–9:
ᮣPress and hold the appropriate key for
approximately two seconds. The display confirms
that the number has been dialed when it shows
“Connecting...”.
Touse Two-Touch Dialing for speed dial locations 10–99:
1. Press the first digit.
2. Press and hold the second digit for approximately
two seconds. The display confirms that the number
has been dialed when it shows “Connecting...”.
Entering Text
SelectingText Input Options
Your phone provides convenient ways to enter words,
letters, punctuation, and numbers wheneveryou are
prompted to enter text (for example, when adding a
Contacts entry or when using Sprint Mail and SMS Text
Messaging).
1. From a screen where you can enter text, press
Text Mode (right softkey) to change the text input
mode.
2. Select one of the following options:
ⅢT9 Word to enter text using a predictive text system
that reduces the number of keypresses required
while entering a word. (See page 30.)
ⅢAlphabet to enter characters by using the Alphabet
mode. (See page 32.)
ⅢSYMBOL to enter symbols. (See page 33.)
ⅢSMILEYS to enter smile icons. (See page 33.)
ⅢEmoticons to enter “emoticons.” (See page 33.)
ⅢWeb Shortcuts to enter Web shortcuts (for example,
www., http://, or .com).
Note Speed dialing may not available when you are
roaming; when you are roaming off the Sprint
National Network, you must always dial using
eleven digits (1 + area code + number).
Phone Basics
ⅢPreset Msgs to enter preprogrammed messages.
(See page 33.)
ⅢRecent Msgs to enter messages used recently.
ⅢPaste List to paste copied or cut text.
ⅢFrom Schedule to extract schedule items you have
added to yourCalendar. (See page 80.)
ⅢFrom To Do to extract task items you added in your
Calendar as To Do.
ⅢNUMBER to enter numbers. (See page 33.)
ⅢSignature to enter your signature. (See page 45.)
ⅢSelect Lang. to select the language (English or
Spanish).
ⅢDelete All to delete all text.
ⅢSelect Text to select stored text forcopying or
cutting.
ⅢAdd Word to store words that you frequently use.
(See page 31.)
ⅢText Options to display the Text Entry settings
menu. (See page 34.)
Entering Text Using T9 Text Input
T9 Text Input lets you enter text by pressing keys just
once per letter. (To select the T9 Word mode when
entering text, see “Selecting Text Input Options”on
page 29.)
T9 Text Input uses an intuitive word database to analyze
the letters you enter and create a suitable word.
(The word may change as you type.)
1. Select the T9Word text input mode. (See “Selecting
Text Input Options”on page 29.)
2. Press the corresponding keys once perletter to enter
aword. (Forexample, to enterthe word “Bill,”press
.) (If you make a mistake, press
to erase a single character. Press and hold
to erase an entire word.)
3. Use your navigation key to scroll through the list
(when applicable), and then select a word.
4. To accept a word and insert a space, press .
Tip When entering text, press the *(Shift) key to
change lettercapitalization (ABC > abc > Abc).
30 Section 2A. Phone Basics
Section 2A. Phone Basics 31
Adding a Word to the T9 Database
If a word you want to enteris not displayed as an option
when you are using T9 Text Input, add it to the database.
1. Select the Add Word text input option. (See
“Selecting Text Input Options”on page 29.)
2. Enter the word using Alphabet Mode and press
Save (left softkey). (See “Entering Text Using
Alphabet Mode” on page 32.) The word will appear
as an option the next time you scroll through
options during T9 Text Input.
To edit or delete the words you have added:
1. Press Menu >Settings > Text Entry > My Words.
2. Highlight a word and press Options (right softkey).
3. Select an option and press .
ⅢEdit to edit a wordin My Words.
ⅢDelete to delete a word in My Words.
Customizing T9 Settings
1. Press Menu > Settings > Text Entry > T9 Settings.
2. Select an option and press .
ⅢWord Prediction to automatically display the word
that may follow the current text input.
ⅢWord Complete to show the completed words that
match the keys you have entered without entering
the whole word.
ⅢWord Scan to allow T9 text input to recognize words
by searching Contacts and messages.
ⅢWord ChoiceList to display the word choice list.
ⅢShow aft enter to select when (after 1–3 digits) to
display the wordlist. The wordlist will be displayed
based on the number of digits you selected.
ⅢShow after wait to select how many seconds the
phone should wait to display the word list.
Formore information about T9 Text Input, visit the
Nuance Web site at www.nuance.com/t9/textinput/.
Phone Basics
32 Section 2A. Phone Basics
EnteringText Using Alphabet Mode
1. Select the Alphabet mode. (See “Selecting Text Input
Options” on page 29.)
2. Press the corresponding keys repeatedly until the
correct letterappears. (For example, to enter the
word“Bill,”press twice, three times,
three times, and three times again.)
(If you make a mistake, press to erase a single
character. Press and hold to erase an entire
word.)
By default, the first letter of an entry is capitalized and the
following letters are lowercased. After a character is
entered, the cursor automatically advances to the next
space after two seconds or when you enter a character
on a different key.
Characters scroll in the following order:
Tip The initial letters of words following spaces can be
either upper - or lowercase depending on the
capitalization setting. Press the *(Shift) key to
change letter capitalization (ABC > Abc > abc).
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
Shift
Space
English Sequence
Upper Case
Key
.,@1?!
*
# /
ABC2
D E F 3
GHI4
J K L 5
MNO6
P Q RS7
T U V 8
W X Y Z 9
abc2
def3
ghi4
j k l 5
mno6
pqrs7
tuv8
w x yz 9
0
Space
One-character-shifted Caps Lock Unshifted
Lower Case
Section 2A. Phone Basics 33
Entering Numbers, Symbols, Smileys,
Emoticons, and Preset Messages
To enter numbers:
ᮣ
Select the NUMBER mode and press the appropriate
key.
(See “Selecting Text Input Options”on
page 29.)
To enter symbols:
ᮣSelect the SYMBOL mode. (See “Selecting Text Input
Options” on page 29.)To enter a symbol, press the
appropriate keyindicated on the display.
Toenter “smileys”:
ᮣ
Select the SMILEYS mode and press the appropriate
key.
(See “Selecting Text Input Options”on
page 29.)
Toenter “emoticons”:
ᮣSelect the Emoticons mode and press the
appropriate key. (See “Selecting Text Input Options”
on page 29.)
To enter preset messages:
1. Select the Preset Msgs mode. (See “Selecting Text
Input Options” on page 29.)
2. Select a message and press .
Note Preset messages make composing text messages
easier by allowing you to enterquick messages,
such as “Meet me at,”“Let’s get lunch,”or a
customized message of your own. (For more
information on preset messages, please see
“Managing Preset Messages”on page 45.)
Phone Basics
34 Section 2A. Phone Basics
Setting Text Entry Options
1. Press Menu > Settings > Text Entry.
2. Select an option and press .
ⅢAuto-Capital to turn auto-capitalization on or off.
ⅢAuto-Space to turn auto-spacing on or off after T9
words you enter.
ⅢInput Language to select the language (English or
Spanish).
ⅢMy Words to add or edit a word in the T9 database
(see page 31).
ⅢT9 Settings to customize the T9 settings (see
page 31).
ⅢDefault Input to select T9 word, Alphabet, orRetain
Mode for the initial entry mode.
ⅢAdd Word to store words that you use frequently
(see page 31).
ⅢAuto-Complete to automatically displaywords that
mayfollow the current text input.
ⅢHelp to see the T9 instructions page.
Using Maps
Activating Maps
You can access Maps from your phone’s main menu,
anywhere on the Sprint network.
1. Press Menu > Maps.
2. Select an option and press .
ⅢNavigation to provide audible and visual driving
directions with full-color moving maps.
ⅢFamily Locator to locate your children or other
family members from your phone or from a
computer.
ⅢLive Local Search to search for businesses in your
area using Live Search.
Section 2B. Settings 35
Section 2B
Settings
ࡗSound Settings (page 35)
ࡗDisplay Settings (page 39)
ࡗLocation Settings (page 43)
ࡗMessaging Settings (page 43)
ࡗAirplane Mode (page 47)
ࡗTTYUse With Sprint Service (page 47)
ࡗPhone Setup Options (page 49)
You can customize yourphone to sound, look, and operate
just the way you want it to.This section describes how to
change yourphone’s settings to best suit your needs.
Take a few moments to review these options and to
adjust or add settings that are right for you.
Sound Settings
Ringer Types
Ringer types help you identify incoming calls and
messages. You can assign ringer types to individual
Contacts entries, types of calls, and types of messages.
Selecting RingerTypes for Incoming Calls
Your phone provides a variety of ringeroptions that allow
you to customize your ring and volume settings. These
options allow you to identify incoming calls by the ring.
1. Press Menu >Settings >Sounds > RingerType >
Incoming Calls.
2. Select Default Ringer,Contact Entries,or Unknown #s.
ⅢIf you select Contact Entries,select All Contacts or
One Contact.
3. Select a category, and then use your navigation key
to scroll through the available ringers. A sample
ringer will sound as you highlight each option.
4. Press to assign a ringer.
Settings
36 Section 2B. Settings
Selecting RingerTypes for Messages
1. Press Menu > Settings > Sounds > RingerType >
Messages.
2. Select Text Message,Picture Mail,Voicemail,
VoiceSMS,or Email.(A list of ringertype categories
will be displayed.)
3. ForVoicemail and Email, skip to step 4. Otherwise,
select Default (Text Message,Picture Mail,or
VoiceSMS), Contact Entries,or Unknown #s.
ⅢIf you select Contact Entries,select All Contacts or
One Contact.
4. Select a category, and then use your navigation key
to scroll through the available ringers. A sample
ringer will sound as you highlight each option.
5. Press to assign a ringer.
Selecting a RingerType for Alarms, Power
On/Off Tone, or Scheduled Events
1. Press Menu > Settings > Sounds > Ringer Type.
2. Select Alarm,Power On,Power Off,or Schedule.
3. Select a category,and then use your navigation key
to scroll through the available ringers. A sample
ringer will sound as you highlight each option.
4. Press to assign a ringer.
Selecting Vibrate Types
With this feature, you can select vibrate types for
incoming calls, messages, alarms, and scheduled
events.
1. Press Menu >Settings >Sounds > Vibrate Type.
2. Select Incoming Calls,Messages,Alarm,or Schedule.
ⅢIncoming Calls: select Default Vibrate or Unknown #s.
ⅢMessages: select Text Message,Picture Mail,
Voicemail,VoiceSMS,or Email.
3. Select a vibrate type and press .
Section 2B. Settings 37
Selecting a Key Tone
Your phone offers a number of options for selecting the
audible tones accompanying a keypress.
1. Press Menu > Settings > Sounds > Keytones.
2. Select an option and press .
ⅢTone Length to select a key tone length. (Longer
tone lengths may be better for tone recognition
when dialing voicemail orother automated
systems.)
ⅢTone Volume to select a keypress volume level.
ⅢTone Type to select the sound of a keypress.
Setting Up Voice Guide
Voice Guide activates both voice prompt and keypress
echo functions. With this feature on, you can hearvoice
prompts when using Automatic Speech Recognition
(ASR),Voice Memo, Screen Call, etc. and hear a voice
saythe numbers that you press on the keypad. (The
default setting is Off.)
1. Press Menu >Settings >Sounds > Voice Guide.
2. Select On or Off.
Adjusting the Phone’s Volume Settings
Adjust yourphone’s volume settings to suit your needs
and yourenvironment.
1. Press Menu > Settings > Sounds > Volume.
2. Select Ringer,Earpiece,Headset,Speakerphone,
Applications,StartUp/PwrOff or Advanced....
3. Using the navigation key,choose a volume level
and pressDone (leftsoftkey).
Tip You can adjust the ringer volume in standby mode
(or the earpiece volume during a call) by using the
volume key on the left side of your phone.
When setting ringer volume, you can check
Always Vibrate and your phone will vibrate
regardless of the volume setting.
Note When the ringer volume is set to Silence All or
Vibrate All,voice prompts cannot be heard.
The keypress echo function is available when you
are in standby mode.
Settings
38 Section 2B. Settings
Adjusting the Alert Volume
You can set the alert volume separately from the ringer
volume setting.
1. Press Menu > Settings > Sounds > Volume >
Advanced...
2. Select Alarms,Text Message,Picture Mail,Voicemail,
VoiceSMS,or Email.
3. Using the navigation key, select Separate Vol.
4. Press the navigation key left or right to choose a
volume level, and press Done (left softkey).
Alert Notification
Set yourphone to alert you with an audible tone when
you change service areas, once a minute during a voice
call, or when a call has been connected.
1. Press Menu > Settings > Sounds > Alerts.
2. Select Beep Each Minute,Out of Service,Connect,
Signal Fade/Call Drop,or Messages and press .
ⅢIf you select Messages,select Text Message,
Picture Mail,Voicemail,VoiceSMS or Email > Repeat
or RingerLength.
3. Select On,Off,or an available option and press .
Silence All
The Silence All option allows you to mute all sounds
without turning your phone off.
Toactivate Silence All:
ᮣWith the phone open, press and hold the volume key
down in standby mode. (The screen will display
“Silence All.”)
Todeactivate Silence All:
ᮣPress the volume key up repeatedly to select a
volume level.
Tip You can make the ringer vibrate at any volume level
by checking Always Vibrate.
Section 2B. Settings 39
Display Settings
Changing the BacklightTime Length
Select how long the display screen and keypad remain
backlit after any keypress is made.
1. Press Menu > Settings > Display > Main Screen or
OuterScreen.
2. Select Backlight.
3. Select Dim Only,Always On,or a preset length of time.
To change the Keypad Light setting:
1. Press Menu >Settings > Display > Keypad Light.
2. Select Always Off or a preset length of time.
Changing the Screen Saver
Your phone offers you the option of displaying a screen
saver while in standby mode.
1. Press Menu > Settings > Display > Main Screen or
OuterScreen > Screensaver.
2. Select an option and press .
3. Select a screen saver and press .
Changing the Display Screen Animation
Your new phone offers options for what you see on the
displayscreen during various phone functions.
1. Press Menu > Settings > Display > Main Screen or
OuterScreen > Animation.
2. Select an option and press .
3. Select an animation displayand press .
Note Long backlight settings reduce the battery’s talk
and standby times.
Settings
40 Section 2B. Settings
Changing the Background
Customize your phone display’s appearance by
selecting a color scheme to reflect your personality.
1. Press Menu > Settings > Display > Outer Screen >
Background.
2. Select a background and press .
Changing the Illumination
Customize your phone display’s appearance by selecting
an illumination scheme to reflect yourpersonality.
1. Press Menu > Settings > Illumination.
2. Select an option (On/Off,Incoming Calls,Messages,
Calendar/Alarm,Active Call,Playing Music,
Numeric Keypad,or Demo)and press .
ⅢIncoming Calls to select Default Lighting,
Contact Entries,or Unknown #s.
ⅷIf you select Contact Entries,select All Contacts or
One Contact,and then select an option.
ⅢMessages to select Text Message,Picture Mail,
Voicemail,VoiceSMS,or Email.
ⅷIf you select Text Message,select
Default Text Msg,Contact Entries,or Unknown #s.
ⅢCalendar/Alarm,Active Call,or Playing Music to
select an available option.
ⅢDemo to select Endless Play,1time,3times,or
5times.
3. Select an illumination pattern and press . (If you
selected On/Off or Numeric Keypad in step 2, you
can select only On or Off.)
Changing the Contrast
Adjust yourscreen’s contrast (brightness) to suit your
surroundings.
1. Press Menu > Settings > Display > Contrast.
2. Select an option and press .
Changing the Phone’s Menu Style
Choose how yourphone’s menu is displayed on the
screen.
ᮣPress Menu > Grid View or List View (right softkey) to
change the menu style.
Section 2B. Settings 41
Changing the Clock Display
Choose whether you want your phone’s clock to be
displayed in analog mode, digital mode, or with time
and date.
1. Press Menu > Settings > Display > Main Screen or
Outer Screen.
2. Select Foreground > Clock/Calendar.
3. Select a display option and press .
4. Press OK (left softkey) to apply the setting.
Changing the Text Font Size
This setting allows you to adjust the Main Screen font
size to view a message and browse on the Web as well
as the Outer Screen font size to view a name and phone
number.
1. Press Menu > Settings > Display > Font Size.
2. Select an option and press .
ⅢMain Screen to select Messages or Browser.
ⅢOuterScreen to select Name/Phone#s.
3. Select a font size and press .
Changing the Input Font Size
Adjust the font size when entering text (for example,
when adding a Contacts entry).
1. Press Menu > Settings > Display > Main Screen >
Input Font.
2. Select Phone#s,Messages,or Others.
3. Select an input font size and press .
Setting Return to Standby Mode
This feature allows you to select the way to return to
standby mode.
1. Press Menu > Settings > Display > Return to Idle.
2. Amessage appears. Press OK (leftsoftkey) to
continue.
3. Select Automatically or End Key.
ⅢAutomatically to return to standby mode
automatically when no key is pressed for 30
seconds.
ⅢEnd Key to return to standby mode by pressing .
Note The End Key setting affects the battery’s talk and
standby times.
Tip From the font preview display, select a font size by
pressing the navigation key right or left.
Settings
42 Section 2B. Settings
PowerSave Mode
This feature helps conserve your battery power by
setting:
ⅢMain Screen and Outer Screen backlight to
Dim Only.
ⅢKey backlight to Always Off.
ⅢMain Screen sleep mode to after 30 sec.
ⅢOuter Screen sleep mode to after 5 sec.
1. Press Menu > Settings > Display > Pwr Save Mode.
2. Amessage appears. Press OK (leftsoftkey) to
continue.
3. Select On.(Select Off to deactivate this feature.)
Sleep Mode
This featurehelps conserve your battery power by
restricting the display.
1. Press Menu >Settings >Display.
2. Select Main Screen or Outer Screen.
3. Select Sleep Mode.
4. Select a time interval beforethe phone goes into
sleep mode and press . (Select Off to deactivate
this feature.)
Setting the Next Schedule
You can display the next scheduled event on the Outer
Screen.
1. Press Menu > Settings > Display > Outer Screeen >
Next Schedule.
2. Select On.(Select Off to deactivate this feature.)
Changing the Text Greeting
A text greeting is displayed on your phone’s screen in
standbymode. Choose the phone’s default greeting
(“Sprint”), or enter your own custom greeting.
1. Press Menu >Settings >Display > Main Screen >
Foreground >Greeting.
2. Select Default or Custom.
ⅢIf you select Custom,entera custom greeting and
press OK (leftsoftkey) >Done (leftsoftkey).
(See “Entering Text”on page 29.) (Use the key
to erase the existing greeting.)
Section 2B. Settings 43
Location Settings
Your phone is equipped with a Location feature for use
in connection with location-based services.
The Location feature allows the network to detect your
position. Turning Location off will hide your location from
everyone except 911.
To enable your phone’s Location feature:
1. Press Menu > Settings > More... >Location.
(The Location disclaimer will be displayed.)
2. Read the disclaimer and press .
3. Select On or Off and press .
When the Location feature is on, yourphone’s standby
screen will display the icon. When Location is turned
off, the icon will be displayed.
Messaging Settings
Staying connected to your friends and family has never
been easier.With your phone’s advanced messaging
capabilities, you can send and receive many different
kinds of text messages without placing a voice call.
(Formore information, see “Accessing Messaging” on
page 146.)
Messaging settings make text messaging easier by
letting you decide how you would like to be notified of
new messages, create a signature with each sent
message, and create yourown preset messages.
Note Turning Location on will allow the network to detect
your position using GPS technology, making some
Sprint applications and services easier to use.
Turning Location off will disable the GPS location
function for all purposes except 911, but will not
hide your general location based on the cell site
serving your call. No application or service may use
your location without your request or permission.
GPS-enhanced 911 is not available in all areas.
Settings
44 Section 2B. Settings
Setting Message Notification
When you receive a message, yourphone notifies you
by displaying an icon on your display screen. You can
also choose to be notified with a message notification
on yourdisplay screen.
1. Press Menu > Settings > Messages > Notification.
2. Select Msgs and Icon or Icon Only.
Setting Message Reminders
When new messages arrive, you can choose to have
your phone notify you byplaying an audible alert.
1. Press Menu > Settings > Sounds > Alerts > Messages.
2. Select Text Message,Picture Mail,Voicemail,
Voice SMS,or Email.
3. Select Repeat or Ringer Length.
4. Select a setting and press .
SMS Text Messages
Setting a CallbackNumber
With this feature, you can specify the callback number
yourrecipients see when you send text messages.
1. Press Menu > Settings > Messages >
Callback Number.
2. Select None,My Phone#,or Other and press .
(If you select Other,entera callback number and
press .)
Deleting Old Messages
With this feature, if the SMS Voice inboxbecomes full,
messages areautomatically deleted starting with the
oldest. (This featureis set to On bydefault.)
1. Press Menu > Settings > Messages > Auto-Delete.
2. Select On or Off and press .
Tip To access the Messaging Settings menu, you can
also press Menu > Messages > Settings.
Section 2B. Settings 45
Adding a Customized Signature
Add a customized signature to each message you send.
1. Press Menu > Settings > Messages > Signature.
2. Press , and then select On.(If you do not wish to
attach a signature to your outgoing messages,
select Off.)
3. Enter a signature and press OK (left softkey). (See
“Entering Text”on page 29.)
Managing Preset Messages
Your phone is loaded with 20 preset messages to help
makesending text messages easier. Customize or
delete these messages, such as “Where are you?,”“Let’s
get lunch,”and “Meet me at” to suit your needs, or add
yourown messages to the list.
To edit or delete a preset message:
1. Press Menu > Settings > Messages > Preset Msgs.
(The list of preset messages will be displayed.)
2. Toedit or delete a message, select it and press
Options (right softkey).
3. Select Edit,edit the message (see “Entering Text” on
page 29), and press .
–or–
Select Delete > Yes (left softkey) to delete the
message. (You can also reset all messages by
selecting Reset All Msgs > Yes [left softkey].)
To change the language of the preset message:
1. Press Menu > Settings > Messages > Preset Msgs.
2. Press Options (right softkey) > Select Lang.
3. Select English or Spanish.
Setting Drafts Alert
With this feature, when you try to send an SMS Text
message, you are reminded if there are unsent
messages in the Drafts folder.
1. Press Menu >Settings > Messages > Drafts Alert.
2. Select On or Off.
Settings
46 Section 2B. Settings
SMS Voice Messages
Setting the Speakerphone
You can set the speakerphone on or off for SMS Voice
messaging. (The speakerphone is set to On by default.)
1. Press Menu > Settings > Messages >
VoiceSMS Options > Speakerphone.
2. Select On or Off.
Setting the Sender’sName
With this feature, you can identify yourself to people who
receive your SMS Voice messages.
1. Press Menu >Settings >Messages >
VoiceSMS Options >From Name.
2. Enter your name and press OK (left softkey).
Setting an Alert Notification
SMS Voice Messaging uses yourphone’s data services.
Your phone can alert that you are connecting to data
services each time you send an SMS Voice message.
1. Press Menu > Settings > Messages >
VoiceSMS Options >Connect. Alert.
2. Press Check (right softkey) to alert you each time
you send an SMS Voice message.
3. Press Done (left softkey) to save the setting.
Section 2B. Settings 47
Airplane Mode
Airplane Mode allows you to use many of your phone’s
features, such as Games and Voice Memos, when you
are in an airplane or in any other area where making or
receiving calls or data is prohibited. When you set your
phone to Airplane Mode, it cannot send orreceive any
calls or access online information.
1. Press Menu > Settings > More... > Airplane Mode.
2. Read the disclaimer and press .
3. Select On or Off and press .
While in Airplane Mode, your phone’s standby screen
will display “Phone Off.”
TTYUseWith Sprint Service
ATTY(teletypewriter, also known as a TDD orText
Telephone) is a telecommunications device that allows
people who are deaf, hard of hearing, or who have
speech or language disabilities, to communicate by
telephone.
Your phone is compatible with select TTY devices.
Please check with the manufacturer of yourTTYdevice
to ensurethat it supports digital wireless transmission.
Your phone and TTYdevice will connect via a special
cable that plugs into your phone’sheadset jack. If this
cable was not provided with yourTTY device, contact
yourTTYdevice manufacturer to purchase the
connector cable.
When establishing your Sprint service, please call Sprint
Customer Service via the state Telecommunications
RelayService (TRS) by first dialing .
Then provide the state TRS with this number:
866-727-4889.
Settings
48 Section 2B. Settings
To turn TTYMode on or off:
1. Press Menu > Settings > More... > Accessibility > TTY.
(An informational message will be displayed.)
2. Read the disclaimer and press OK (left softkey).
3. Select On to turn TTY mode on.
–or–
Select Off to turn TTY mode off.
WARNING 911 Emergency Calling
Sprint recommends that TTYusers make
emergency calls by other means, including
Telecommunications Relay Services (TRS),
analog cellular, and landline
communications. Wireless TTYcalls to 911
may be corrupted when received by public
safety answering points (PSAPs), rendering
some communications unintelligible. The
problem encountered appears related to
TTYequipment or software used by PSAPs.
This matter has been brought to the
attention of the FCC, and the wireless
industryand the PSAPcommunity are
currently working to resolve this.
Note In TTYMode, your phone will display the TTY access
icon.
If TTYmode is enabled, the audio quality of non-TTY
devices connected to the headset jack may be
impaired.
Section 2B. Settings 49
Phone Setup Options
Shortcuts
Yourphone offers you the option of assigning shortcuts to
favorite or often-used functions. Pressing the navigation
key to the assigned direction in standby mode will launch
yourpersonally designated shortcuts.
1. Press Menu > Settings > More... > Navigation Keys.
2. Select a navigation key and press .
3. Using the navigation key or your keypad, select a
shortcut and press Assign (left softkey). (If there are
additional levels available, press before
selecting yourshortcut.)
Call Answer Mode
Select how to answer incoming calls on your phone:
whether you want to be required to press , to press
any numberkey, or simply to open the phone.
1. Press Menu > Settings > More... > Call Setup >
Call Answer.
2. Select Talk Key,Any Key,or Flip Open and press .
Auto-Answer Mode
Set yourphone to automatically pick up incoming calls
when connected to an optional hands-free device.
Remember, your phone will answercalls in Auto-
Answer mode even if you are not present.
1. Press Menu > Settings > More... > Call Setup >
Auto-Answer.
2. Select an option and press.
ⅢHands-free to answer calls automatically when the
phone is connected to a hands-free device (sold
separately).
ⅢSpeakerphone to answer calls automatically in
speakerphone mode.
3. Select 5Seconds,15 Seconds,or Off.
Settings
50 Section 2B. Settings
Setting the Key Guard
This feature enables you to lock external keys while the
phone is closed.
1. Press Menu > Settings > More... > Key Guard.
2. Select On or Off and press .
Display Language
You can choose to display yourphone’s onscreen
menus in English or in Spanish.
1. Press Menu > Settings > Display > Language.
2. Select English or Español and press .
Setting Abbreviated Dialing
To activate the Contacts Match feature:
1. Press Menu > Settings > More... > Call Setup.
2. Select Contacts Match > On.
To activate the Prepend feature:
1. Press Menu > Settings > More... > Call Setup >
Abbrev. Dial.
2. Select Prepend > On.
3. Enter the first five- orsix-digit prefix in the Prepend#
field and then press OK (leftsoftkey).
ⅢTo deactivate this feature, select Off during step 2
above.
Note This setting does not apply to911 or Sprint 411.
Tip Tomakean Abbreviated Dial call, see “Using
Abbreviated Dialing” on page 27.
Tip You can deactivate this feature temporarily by
pressing and holding the volume key while the
phone is closed.
Note This feature does not apply when the phone is open.
Section 2B. Settings 51
Headset Options
Set up yourphone for hands-free use, the type of
headset (mono or stereo), and the ringer mode.
To connect the headset:
ᮣSimply plug the headset into yourphone’s headset
jack.
To set the headset mode:
1. Press Menu > Settings > More... > Headset Mode.
2. Select Turbo Button.
3. Select an option and press :
ⅢOn: Press the Turbo Button (operation button on
your headset) to redial the last call. Press and hold
to activate ASR (automatic speech recognition).
(See “Section 2H: Voice Services”on page 86 for
moreinformation.)
ⅢOff: Select Off if you do not wish to assign a Turbo
Button setting or if your headset does not have a
Turbo Button.
Toset the audio mode:
1. Press Menu > Settings > More... > Headset Mode.
2. Select Earpiece > Stereo or Mono.
To set the ringer mode:
1. Press Menu > Settings > More... > Headset Mode.
2. Select RingerSound > Normal or Headset Only.
Browser Settings
This feature enables you to customize the Browser
settings through the phone’s settings menu.
Editing Bookmarks
You can edit the names or URLs of your bookmarks, sort
them, or delete them from your phone. (See “See
Exploring the Web”on page 151.)
1. Press Menu >Settings >More... > Browser >
Bookmarks.
2. Highlight a bookmark and press Options (right
softkey).
3. Select an option and press .
ⅢShow Page displays the Web page of the selected
bookmark.
ⅢEdit to edit the title or address of the selected
bookmark.
Settings
52 Section 2B. Settings
ⅢSet Home to set the selected bookmark as your
home page.
ⅢDelete to delete the selected bookmark.
ⅢDelete All to delete all bookmarks saved in the
phone.
ⅢReorder to change the order of the bookmarks.
Deleting Browser Cache Files and Cookies
With this feature, you can delete the browser cache
(temporary files) and cookies (information used by Web
sites you have visited) saved in the phone.
1. Press Menu > Settings > More... > Browser.
2. Select Delete Web Cache or Delete Web Cookies.
3. If you are certain you would like to delete, press
OK (left softkey) >Yes(left softkey).
Editing the Home Page
This feature allows you to edit the URLof the home page
on yourphone.
1. Press Menu > Settings > More... > Browser >
Edit Home Page.
2. Use yourkeypad to edit the URL and press Save (left
softkey) to save your changes.
Section 2C. Security 53
Section 2C
Security
ࡗAccessing the Security Menu (page 53)
ࡗUsing Your Phone’s Lock Feature (page 54)
ࡗRestricting Calls (page 55)
ࡗUsing Special Numbers (page 56)
ࡗDeleting Phone Content (page 56)
ࡗResetting Phone Content (page 57)
ࡗSecurity Features for Sprint Power Vision (page 58)
By using the security settings on your phone, you receive
peace of mind without sacrificing flexibility. This section will
familiarize you with your phone’s security settings. With
several options available, you can customize your
phone to meet yourpersonal needs.
Accessing the Security Menu
All of yourphone’s security settings are available
through the Security menu. You must enter your lock
code to view the Security menu.
1. Press Menu > Settings > More... > Security.
2. Enter your lock code to display the Security menu.
Tip If you can’t recall your lock code, try using the last
four digits of your wireless phone number. If this
doesn’t work,call Sprint Customer Service at
1-888-211-4727.
Security
54 Section 2C. Security
Using Your Phone’s Lock Feature
Locking Your Phone
When yourphone is locked, you can only receive
incoming calls or make calls to 911, Sprint Customer
Service, or special numbers. (See “Using Special
Numbers” on page 56.)
1. Press Menu > Settings > More... > Security and enter
yourlock code.
2. Select Lock My Phone > Lock Now.(To set yourphone
to lock the next time it is turned on, select
On Power-up.)
3. Select Full Lock or Excp. Incom. Calls.
ⅢFull Lock to prevent making or receiving calls
except incoming calls from the special numbers.
ⅢExcp. Incom. Calls to allow incoming calls but not
outgoing calls.
Unlocking Your Phone
1. From standby mode, press Unlock (left softkey).
2. Enter your lock code.
Changing the Lock Code
1. Press Menu > Settings > More... > Security and enter
yourlock code.
2. Select Change Code,and then enter and re-enter
yournew lock code.
Calling in Lock Mode
You can place calls to 911 and to your special numbers
when in lock mode. (For information on special
numbers, see “Using Special Numbers” on page 56.)
ᮣTo call an emergency number, special number, or
Sprint Customer Service, enterthe phone number
and press .
Section 2C. Security 55
Locking the Camera/Photos Menus
1. Press Menu > Settings > More... > Restrict and Lock.
2. Select Camera/Pictures,and then enter your lock
code.
3. Select an option and press .
ⅢUnlocked to unlock the current Camera/Photos
lock feature.
ⅢLock Camera to lock camera operation.
ⅢLock Photos to lock access to files in My Albums.
ⅢLock All to lock camera operation and access to
files in My Albums.
Locking Voice Services
This setting allows you to block incoming and outgoing
calls (except 911 calls) and SMS Voice messages.
1. Press Menu > Settings > More... > Restrict and Lock.
2. Select Voice,and then enter your lock code.
3. Select Lock > Locked.(Select Unlocked to deactivate
this feature.)
Restricting Calls
There may be occasions when you want to limit the
numbers yourphone can call or from which it can
receive calls. You can use the Restrict Calls setting to do
just that. (The Restrict Calls setting does not apply to
911 or Sprint CustomerService.)
1. Press Menu > Settings > More... > Restrict and Lock.
2. Select Voice,and then enter your lock code.
3. Select Restrict > Incoming Calls or Outgoing Calls.
4. Select an option and press .
ⅢAllow All to make or receive all calls.
ⅢContacts Only to make or receive calls to or from
Contacts entries, voicemail, orspecial numbers
only.
ⅢSpecial #s Only to make or receive calls to or from
three special numbers only. (See “Using Special
Numbers” on page 56.)
Note Restricted incoming calls are forwarded to
voicemail.
Security
56 Section 2C. Security
Using Special Numbers
Special numbers are important numbers that you have
designated as being “always available.”You can call and
receive calls from special numbers even if your phone is
locked.
You can save up to three special numbers in addition to
yourContacts entries (the same number may be in both
directories).
Toadd or replace a special number:
1. Press Menu >Settings >More... >Security and enter
yourlock code.
2. Select Special Numbers.
3. Select a location for your entry.
4. Enter the numberand press .
5. Press Done
(left softkey) to return to the security menu
.
Deleting Phone Content
Use the Security menu to quickly delete all the content
you have created orstored in your phone.
1. Press Menu > Settings > More... > Security and enter
yourlock code.
2. Select Delete/Reset.
3. Select an option and press .
ⅢDelete Web Cookies to delete all Web cookies (data
saved in your phone by sites you have visited).
ⅢDelete Web History to delete all saved Web
addresses of sites you have visited.
ⅢDelete Web Cache to delete all Web page
information saved in your phone.
ⅢDelete Contacts to delete all of your Contacts
entries.
ⅢDelete My Stuff to delete all items you have
downloaded to your phone.
ⅢDelete Photos to delete all pictures saved in the
phone.
Note Thereare no speed dial options associated with
special numbers.
You cannot make calls to orreceive calls from
special numbers if Voice is set toLocked in
Restrict and Lock.
Section 2C. Security 57
ⅢDelete Voice Data to delete all voice data and call
memos saved in the phone.
ⅢDelete Message to delete all messages (including
locked ones) in the Inbox, Sent Mail, Pending, and
Drafts folders; all Recent Lists; and all user-
created preset messages (text messages, SMS
Voice messages, etc.).
ⅢDelete CalendarEvents to delete all scheduled
events (including secret ones).
4. Read the disclaimer and press OK (left softkey) >
Yes (left softkey) to confirm the deletion.
Resetting Phone Content
Resetting the phone restores all the factory defaults,
including the ringer types and display settings.
Contacts, History, Scheduler, and Messages are not
affected.
1. Press Menu > Settings > More... > Security and enter
yourlock code.
2. Select Delete/Reset.
3. Select an option and press .
ⅢReset Browser to reset your Web browser’s history,
bookmarks, cookies, error log, auto-complete text,
and URLs.
ⅢReset Shortcuts to reset all shortcuts settings.
ⅢReset Pic. Mail to reset your authentication ID for
yourSprint Picture Mail account.
ⅢReset All Settings to restore all the factory defaults,
including ringer types and display settings.
Contacts, History, Calendar, and Messages are
not affected.
ⅢReset Phone to reset all settings and delete all data
on your phone.
Security
58 Section 2C. Security
4. Read the disclaimer and press OK (left softkey).
5. If you are certain that you would like to reset your
phone, press Yes (left softkey).
Security Features for Sprint
Power Vision
Enabling and Disabling Data Services
You can disable data services without turning off your
phone; however, you will not have access to all data
services, including Web and messaging. Disabling data
services will avoid any charges associated with these
services. While signed out, you can still place orreceive
phone calls, check voicemail, and use othervoice
services. You may enable data services again at any
time.
To disable data services:
1. Press Menu > Settings > More... > Data > Disable Data.
(A message will be displayed.)
2. Press Disable (right softkey) to confirm that you want
to sign out.
Section 2C. Security 59
To enable data services:
1. Press Menu > Settings > More... > Data > Enable Data.
(A message is displayed.)
2. Press OK (left softkey) to enable Vision service.
Locking Sprint Data Services
You can lock access to Sprint data services without
signing out.
1. Press Menu > Settings > More... > Restrict and Lock.
2. Select Data > Off and Lock,and then enter your
lock code.
3. Select Locked.(Select Unlocked to deactivate this
feature.)
Security
60 Section 2D. Roaming
Section 2D
Roaming
ࡗUnderstanding Roaming (page 60)
ࡗSetting Your Phone’s Roam Mode (page 61)
ࡗUsing Call Guard (page 62)
ࡗUsing Data Roam Guard (page 63)
Roaming is the ability to make or receive calls when you’re off
the Sprint National Network.Your new digital dual-band
KATANA Eclipse by SANYO works anywhere on the
Sprint National Network and allows you to roam on
1900 and 800 MHz digital networks.This section
explains how roaming works as well as special features
that let you manage your roaming experience.
Understanding Roaming
Recognizing the Roaming Icon on the Display
Screen
Your phone’s display screen always lets you know when
you’re off the Sprint National Network. Anytime you are
roaming, the phone displays the roaming icon ( ).
Roaming on Other Digital Networks
When you’re roaming on digital networks, your call
quality and security will be similar to the quality you
receive when making calls on the Sprint National
Network. However, you may not be able to access
certain features, such as Sprint Power Vision, depending
on the available network.
Tip Remember, when you are using your phone off the
Sprint National Network, always dial numbers using
11 digits (1 + area code + number).
Section 2D. Roaming 61
Checking for Voicemail Messages While
Roaming
When you are roaming off the Sprint National Network,
you may not receive on-phone notification of new
voicemail messages. Callers can still leave messages,
but you will need to periodically check your voicemail for
new messages if you are in a roaming service area for
an extended period of time.
1. Dial 1 + area code + yourphone number.
2. When you hear your voicemail greeting, press .
3. Enter your passcode at the prompt and follow the
voice prompts.
When you return to the Sprint National Network,
voicemail notification will resume as normal.
SettingYour Phone’s Roam Mode
Your phone allows you to control yourroaming
capabilities. By using the Roaming menu option, you
can determine which signals yourphone accepts.
Choose from two different settings on your phone to
control yourroaming experience.
1. Press Menu > Settings > More... > Roaming >
Set Mode.
2. Select an option and press .
ⅢSprint Only
to access the Nationwide Sprint PCS
Network only and prevent roaming on other
networks.
ⅢAutomatic to seek service on the Sprint National
Network. When Sprint service is unavailable, the
phone searches for an alternate system.
Note If you’re on a call when you leave the Sprint National
Network, your call is dropped. If your call is dropped
in an area where you think Sprint service is
available, turn your phone off and on again to
reconnect to the network.
Roaming
62 Section 2D. Roaming
Using Call Guard
Your phone has two ways of alerting you when you are
roaming off the Sprint National Network: the onscreen
roaming icon and Call Guard. Call Guard makes it easy
to manage yourroaming by requiring an extra step
before you can place oranswer a roaming call. (This
additional step is not required when you make or receive
calls while on the Sprint National Network.)
Toturn Call Guard on or off:
1. Press Menu >Settings > More... > Roaming >
Call Guard.
2. Select On or Off and press.
To place roaming calls with Call Guard on:
1. From standby mode, dial 1 + area code + the
seven-digit number and press .
2. Press any key to delete the pop-up message, and
press Options (right softkey) > Roam Call.
To answer incoming roaming calls with Call Guard on:
1. Press . (A message will be displayed notifying
you that roaming charges will apply.)
2. Press any key to delete the pop-up message, and
press Options (right softkey) > Answer.
Note If the Call Guardfeatureis set toOn,you need to
take extra steps to make and receive roaming calls.
Note Voice dialing and speed dialing are not available
when you are roaming with Call Guard enabled.
Section 2D. Roaming 63
Using Data Roam Guard
Depending on service availability and roaming
agreements, yourphone may be able to access data
services while roaming on certain digital systems. You
can set yourphone to alert you when you are roaming
off the Sprint National Network and try to use data
services such as messaging.
To set your Data Roam Guard notification:
1. Press Menu > Settings > More... > Roaming >
Data Roaming.
2. Select an option and press .
ⅢAlways Ask
turns your phone’s Data Roam Guard
feature on. You will see a prompt and will be
required to respond anytime you access data
services while roaming.
ⅢNever Ask turns your phone’s Data Roam Guard
feature off. You will not be notified of your roaming
status when accessing data services.
To use data services when Data Roam Guard is active:
ᮣWhen a pop-up notification appears informing you
that data roam charges may apply, press Roam (left
softkey) to connect.
Roaming
64 Section 2E. History
Section 2E
History
ࡗViewing History (page 64)
ࡗHistory Thread (page 65)
ࡗHistory Details (page 65)
ࡗHistory Menu Options (page 66)
ࡗMaking a Call From History (page 66)
ࡗSaving a Phone Number From History (page 67)
ࡗPrepending a Phone Number From History (page 67)
ࡗDeleting History (page 68)
The History keeps track of incoming calls, outgoing calls, and
missed calls. This section guides you through accessing
and making the most of your History.
Viewing History
History is a list of the last 60 phone numbers (or
Contacts entries) forcalls you placed, accepted, or
missed. History makes redialing a number fast and easy.
It is continually updated as new numbers are added to
the beginning of the list and the oldest entries are
removed from the bottom of the list.
Each entry contains the phone number (if it is available)
and Contacts entry name (if the phone number is in your
Contacts). Duplicate calls (same number and type of
call) may only appear once on the list.
To display your History:
ᮣFrom standby mode, press .
–or –
Press Menu >History.
The current day’s history appears under Today, and the
previous day’s history appears under Yesterday. Other
history includes date information.
Section 2E. History 65
History Icon Indication
You can determine the type of phone call that was
placed, accepted, or missed from the icons shown
below.
ⅷ– Incoming Call
ⅷ– Outgoing Call
ⅷ– Missed Call
History Thread
The History thread screen shows all history of a selected
history entry.
To display a History thread:
ᮣFrom the History list display, select the entry you
wish to view and press .
History Details
To display History details:
ᮣFrom a History thread display, select an entry and
press .
The History details screen shows the call type, phone
number, and date and time of the call. An onscreen
menu is also displayed according to the type of call.
See “History Menu Options” on page 66.
To make a call from History details screen, press .
Tip You can also view the next History entry by pressing
the navigation key right or view the previous entry
by pressing the navigation key left.
Tip SMS messages are included in the History thread.
Note History records only calls that occur while the phone
is turned on. If a call is received while your phone is
turned off, it will not be included in the phone’s
Incoming or Missed call logs.
If you return a call from the voicemail menu, it will
not be included in your phone’s Outgoing call log.
History
66 Section 2E. History
History Menu Options
Select a History entry and press to display the date
and time of the call, the phone number (if available), and
the caller’s name (if the numberis already in your
Contacts). Press Options (right softkey) to display the
following options:
ⅷCall:Speaker On to dial the phone number in
speakerphone mode.
ⅷNew Group to access a Group entry menu to create a
new Group entry.
ⅷContact Details to display information about the entry if
it has already been saved in yourContacts.
ⅷSave Contact to save a phone number. (See “Saving a
Phone Number From History” on page 67.)
ⅷDelete to delete the entry.
ⅷDelete All to delete all entries in the History. (See
“Deleting History” on page 68.)
ⅷRename to change any entry’s current name to Caller
ID name.
ⅷPrepend to add numbers to the beginning of the
selected number. (See “Prepending a Phone Number
From History” on page 67.)
Making a Call From History
To make a phone call from History:
ᮣFrom the History list display, use yournavigation key
to select an entry and press .
Note You cannot make calls from History to entries
identified as No ID or Restricted.
Section 2E. History 67
Saving a Phone Number From
History
Your phone can store up to 500 Contacts entries.
Contacts entries can store up to a total of 700 phone
numbers, and each entry’s name can contain 64
characters.
1. Select a History entry and press Options (right
softkey) > Save Contact.
2. Select New Entry to create a new Contacts entry for
the number orExisting Entry to save the number to an
existing entry.
3. If New Entry was selected, select a number type, and
then use the keypad to enter the new entry name
and press .
–or –
If Existing Entrywas selected, select an existing entry
to which you want to save the number, and then
select a number type and press .
4. Press Done (left softkey) to save the entry.
Prepending a Phone Number
From History
If you need to make a call from History and you are
outside yourlocal area code, you can add the
appropriate prefix by prepending the number.
1. Select a History entry and press Options (right
softkey) > Prepend.
2. Enter the prefix and press to call the number.
History
68 Section 2E. History
Deleting History
You can delete individual or all entries in your History
using the Options menu.
1. Press Menu > History to display yourHistory.
2. Select an entry you wish to delete and press Options
(right softkey) > Delete. (Select Delete All if you wish
to delete all entries in yourHistory.)
3. If you are certain you want to delete the History,
press Delete (left softkey).
Section 2F. Contacts 69
Section 2F
Contacts
ࡗAbout Contacts (page 69)
ࡗCreating a New Contacts Entry (page 69)
ࡗFinding Contacts Entries (page 70)
ࡗContacts Entry Options (page 72)
ࡗEditing a Contacts Entry (page 73)
ࡗSecret Contacts Entries (page 76)
ࡗDialing Sprint Services (page 77)
ࡗWireless Backup (page 77)
Yourphone’s Contacts list helps you stay in touch with family,
friends, and colleagues by keeping track of all theircontact
information. This section explains how to use your
phone’s Contacts list.
About Contacts
Your phone can store up to 500 Contacts entries.
Contacts can store up to 700 phone numbers, 1000
email addresses, and 500 Web addresses. You can also
add Contacts entries to Groups, allowing you to send the
same text, picture, or voice message to up to 25
Contacts entries at one time.
Creating a New Contacts Entry
Creating a Contacts Entry
1. Press Menu > Contacts > Add New > New Contact.
2. Enter a name forthe new entry and press the
navigation key down.
3. Enter the phone number for the entry and press .
4. Select a number type forthe entry (Mobile, Home,
Work, Pager, Fax, or Other) and press .
5. Press Done (left softkey).
After you have saved the number, the new Contacts
entry is displayed.
Contacts
70 Section 2F. Contacts
Creating a Group
You can create a group by assigning members to it and
then giving it a name.
1. Press Menu > Contacts > Add New > New Group.
2. Read the message and press Start (left softkey).
3. Scroll through the list and press after each
selection. (A check mark will appearin the box next
to the selected entry.)
4. When you’ve marked all the entries you want to add,
press Continue (left softkey).
5. Enter a name for the new group and press .
6. Press Save (left softkey) to save the group entry.
Finding Contacts Entries
There are several ways to display your Contacts entries:
by name, by speed dial number, and by group. Follow
the steps outlined in the sections below to display
entries from the Contacts menu.
Finding Contacts byName
1. Press Menu > Contacts.
2. Scroll through all the entries.
–or–
Enter the first letter of a name or part of a name.
(The more letters you enter, the more your search
narrows.)
3. To display an entry, select it and press .
4. To dial the entry’s default phone number, press .
–or–
To display additional Contacts entries, press the
navigation key left or right.
Tip ICE– In Case of Emergency
To make it easier for emergency personnel to
identify important contacts, you can list your local
emergency contacts under “ICE”in your phone’s
Contacts list. For example, if your mother is your
primary emergency contact, list her as “ICE–Mom”
in your Contacts list. To list more than one
emergency contact, use “ICE1–___,”“ICE2–___,”
etc.
Section 2F. Contacts 71
Finding Speed Dial Numbers
1. Press Menu > Settings > More... > Contacts >
Speed Numbers.
2. Scroll through speed dial entries. Speed dial
numbers are displayed in numeric order.
3. To dial the entry’s displayed phone number,
press .
Finding Group Entries
1. Press Menu > Contacts.
2. Scroll through the group titles using your navigation
key. To display Contacts entries belonging to a
group, highlight the group and press .
3. To dial the entry’s displayed phone number,
press .
Viewing History from Contacts
You can view the history of a selected Contacts entry
from the Contacts list.
ᮣHighlight an entry and press Options (right softkey) >
Contact History.
Contacts
72 Section 2F. Contacts
Contacts Entry Options
To access a Contacts entry’s options, highlight the entry
and press Options (right softkey). Select an option and
press .
Individual Contacts entry options:
ⅷNew Group to create a new group.
ⅷEdit Contact to edit the selected Contacts entry.
ⅷSend Message to send an SMS Text message, an SMS
Voice message, an Email, or Picture Mail.
ⅷDelete Contact to delete the selected Contacts entry.
ⅷContact History to display the selected Contacts entry’s
history.
ⅷSend Contact to send the selected Contacts entry via
Bluetooth.
ⅷSet as Secret to make the selected Group secret. See
“Secret Contacts Entries” on page 76.
ⅷSettings to display the Settings menu.
ⅷPrint to print the selected Contacts entry’s information.
Group options:
ⅷNew Group to create a new group.
ⅷEdit Group to edit the selected group.
ⅷDelete Group to delete the selected group.
ⅷSend Contact to send the selected Contacts entry via
Bluetooth.
ⅷSet as Secret to make the selected Group secret. See
“Secret Contacts Entries” on page 76.
ⅷSettings to display the Settings menu.
ⅷPrint to print the selected Contacts entry’s information.
Tip You can view the next entry by pressing the
navigation key right or view the previous entry by
pressing the navigation key left.
Section 2F. Contacts 73
Editing a Contacts Entry
Adding a Phone Number to a Contacts
Entry
1. Display a Contacts entry. (See “Finding Contacts
Entries” on page 70.)
2. Press Options (right softkey) > Edit Contact.
3. Scroll down to highlight <Add Number> and enter
the new phone number and press .
4. Select a number type forthe number and press .
5. Press Done (left softkey) to save the new number.
Adding Members to a Group
1. From the Contacts list, highlight the group to which
you want to add members and press .
2. Press Options (right softkey) > Edit Group > Add More.
3. Read the message and press Start(left softkey).
4. Highlight each member you want to add and
press after each selection. (A check mark will
appear in the box next to the selected member.)
5. Press Continue (left softkey) > Save (left softkey).
Selecting an Illumination Pattern fora
Contacts Entry
You can assign an illumination scheme to a Contacts
entry so you can identify the caller by illumination
pattern. (See “Changing the Illumination” on page 40.)
1. Display a Contacts entry and press .
2. Select Set Illuminations and press to display the
illuminations menu .
3. Highlight an illumination patterns menu
(Incoming Calls, Text Message, Picture Mail, VoiceSMS,
or Email) and press .
4. Select Change.
5. Select an illumination pattern and press .
Contacts
74 Section 2F. Contacts
Assigning Speed Dial Numbers
Your phone can store up to 98 phone numbers in speed
dial locations. (Fordetails on how to make calls using
speed dial numbers, see “Using Speed Dialing” on
page 29.)
To assign a speed dial number to a new phone number:
1. Add a phone number to a new orto an existing
Contacts entry. (See “Creating a New Contacts
Entry” on page 69 or“Adding a Phone Number to a
Contacts Entry” on page 73.)
2. Press Options (right softkey)> Set Speed Dial.
3. Select an available speed dial location and
press . (A confirmation will be displayed.)
To assign a speed dial number to an existing phone
number:
1. Display a Contacts entry. (See “Finding Contacts
Entries” on page 70.)
2. Highlight the number you wish to set as a speed
dial and press Options (right softkey) >
Set Speed Dial.
3.
Select an available speed dial location and
press
. (A confirmation will be displayed.)
Editing a Contacts Entry
1. Display a Contacts entry.
2. Press Options (right softkey) > Edit Contact.
3. Select the field you wish to edit, and then add oredit
the information and press .
4. Press Done (left softkey) to save the new number.
Editing a Group
1. Display the Contacts list and highlight the group
you want to edit.
2. Press Options (right softkey) > Edit Group.
3. Change the group name or the assigned image.
4. Press Save (left softkey) to save your changes.
Note If you attempt to assign an already in-use speed dial
location to a new phone number, a message will
appear asking if you wish to replace the existing
speed dial assignment. Press Replace (left softkey)
to assign the location to the new phone number
and delete the previous speed dial assignment.
Section 2F. Contacts 75
Selecting a RingerType for a Contacts
Entry
Assign a ringer type to a Contacts entry so you can
identify the caller by the ringertype. (See “RingerTypes”
on page 35.)
1. Display a Contacts entry and press .
2. Select the current ring type and press to display
the RingerType menu.
3. Highlight a ringer type menu (Incoming Calls,
Text Message, Picture Mail, VoiceSMS, or Email) and
press .
4. Select Change.
5. Select an option and press .
6. Select a ringer and press .
Assigning an Image to a Contacts Entry
You can assign an image to a Contacts entry. The image
is displayed when the entry calls you.
1. Display a Contacts entry and press .
2. Press the navigation key to highlight the icon
and press .
3. Select Select Image.
4. Select an option and press .
5. Select an image and press .
Removing an Entry from a Group
1. Display the Contacts list and highlight a group from
which you want to delete a member.
2. Press Options (right softkey) >Edit Group.
3. Highlight the member you want to delete and press
Options (right softkey) > Remove from Gr. > Yes (left
softkey).
4. Press Save (left softkey).
Contacts
76 Section 2F. Contacts
Secret Contacts Entries
You can hide an entry by making it secret. The entry is
not displayed in your Contacts. In History, a telephone
number is displayed but the Contacts entry's name is
not.
To make an entry secret:
1. Highlight a Contacts entry and press Options (right
softkey) > Set as Secret.
2. Select On.
3. From the Contacts list, press Options (right softkey) >
Settings >Hide Secret.
4. Enter the four-digit lock code.
To make an entry public:
1. From the Contacts list, press Options (right softkey) >
Settings > Show Secret.
2. Enter the four-digit lock code.
Tip If you can’t recall your lock code, try using the last
four digits of your wireless phone number. If this
doesn’t work, call Sprint Customer Service at
1-888-211-4727.
Note If you make an entry secret, calls cannot be made to
that entry if Contacts Only is selected in Settings >
More... > Restrict and Lock > Voice > Restrict >
Incoming Calls or Outgoing Calls (see page 55).
Section 2F. Contacts 77
Dialing Sprint Services
Your Contacts list is preprogrammed with contact
numbers for various Sprint services.
To dial a service from your Contacts:
1. Press Menu > Settings > More... > Contacts >
Services.
2. Select CustomerService, Dir Assistance (Sprint 411),
Account Info, or Sprint Operator.
To dial a service from standby mode using your keypad:
1. Dial the appropriate service number:
ⅢCustomerService –
ⅢSprint 411 –
ⅢAccount Info –
ⅢSprint Operator –
2. Press to place the call.
Wireless Backup
This feature allows you to back up all of your contacts to
the Sprint Web site and restore them if your phone is lost,
stolen, damaged, or replaced.
To subscribe to the wireless backup service, you will
need to purchase a license to use the wireless backup
service through yourphone’s browser. The license
expires aftera set period of time and must be renewed
regularly. As part of the initial subscription process, a
random wireless backup password is generated. The
randomly generated password will be sent to your
phone as an SMS text message. (Subscribe launches
the subscription process. If you are already subscribed
to wireless backup service, Unsubscribe will be
displayed.)
Tip To use the wireless backup service, you are
required to activate the service from your phone.
Contacts
78 Section 2F. Contacts
Activating and Deactivating Wireless Backup
Service
To activate the wireless backup service:
1. Press Menu > Settings > More... > Wireless Backup >
Subscribe. (You will be prompted to confirm your
license status.)
2. Press Yes (left softkey) and follow the onscreen
instructions to purchase the license.
3. Please wait while registering the license. (You will
see a confirmation screen if it has been registered.)
To deactivate the wireless backup service:
1. Press Menu > Settings > More... > Wireless Backup >
Unsubscribe. (A message will be displayed.)
2. Follow the onscreen instructions to unsubscribe
from the wireless backup service.
Viewing Your Wireless Backup Status
1. Press Menu >Settings > More... > Wireless Backup >
View Status.
2. Press OK (left softkey).
Setting the Wireless Backup Alert
This feature turns the pop-up alert on or off when a
Wireless Backup is in progress.
1. Press Menu >Settings >More... >Wireless Backup >
Alert.
2. Select Alert me or No alerts.
Note You can unsubscribe from the wireless backup
service only through the Sprint Web site.
Tip Each time you edit the contacts on your
phone, they are backed up at
www.wirelessbackup.sprint.com.
Note Once you have completed the registration, you will
receive a message with your password, which you
need to access the Wireless Backup Web site
(www.wirelessbackup.sprint.com) in order to edit
your contacts from your computer.
Section 2F. Contacts 79
Tip To display the wireless backup service information,
press Menu > Settings > More... >
Wireless Backup > Learn More. When the service is
available, you can also select Troubleshoot to
display the troubleshooting guide.
Contacts
80 Section 2G. Calendarand Tools
Section 2G
Calendar and Tools
ࡗUsing Your Phone’s Calendar(page 80)
ࡗUsing Your Phone’s Alarm Clock (page 84)
ࡗUsing Your Phone’s Tools (page 84)
Your phone is equipped with several personal information
management features that help you manage your busy
lifestyle. This section shows you how to use these
features to turn yourphone into a time management
planner that helps you keep up with yourcontacts,
schedules, and commitments.
Using Your Phone’s Calendar
Adding a Schedule Event to the Calendar
Your Calendar helps organize your time and reminds
you of important events up to 100 items.
1. Press Menu > Tools > Calendar.
2. Select the day to which you would like to add an
event and press Options (right softkey) >
Add Schedule.
3. Enter a description and press .
4. Select the following items you want to set and
press .
ⅢCategory to select an event category (Appointment,
Business, Meeting, Personal, Vacation, Travel, or
Miscellaneous).
Tip To change the calendar display views, press the left
softkey repeatedly to toggle Monthly or Weekly
views. In the weekly view, you can easily add to or
edit your own schedule.
Section 2G. Calendarand Tools 81
ⅢPriority to select an event priority (None, High,
or Low).
ⅢStart to schedule a start time for the event. Use
yourkeypad or navigation key to set the hours,
minutes, and AM orPM.
ⅢEnd to schedule an end time for the event. Use
yourkeypad or navigation key to set the hours,
minutes, and AM orPM.
ⅢLocation to add a location forthe schedule.
ⅢAlarm to select a ringer type forthe alarm.
ⅢAlarm Time to edit the alarm time (number of hours
or minutes before the schedule starts). The default
alarm time is 10 minutes before a schedule.
ⅢRepeat to select a repeating status for the
schedule (Once, Daily, Weekly, Monthly, or Yearly).
5. Press Save (left softkey) to save the event.
Adding a Call Alarm to the Calendar
You can set call alarms to notify you when you need to place
a call. The call alarm will let you know when and to whom to
place a scheduled call. You can set up to 15 call alarms.
1. Press Menu > Tools > Calendar.
2. Select a day and press Options (right softkey) >
Add Call Alarm.
3. Enter the phone numberdirectly orpress Options
(right softkey) > From Contacts or Voicemail.
ⅢFrom Contacts to select a number from your
Contacts.
ⅢVoicemail to select the number for voicemail access.
4. Select the items to edit and press .
ⅢCategory to select an event category (Appointment,
Business, Meeting, Personal, Vacation, Travel, or
Miscellaneous).
ⅢTime/Date to edit the start time and date.
ⅢAlarm to select the ringer alarm.
ⅢRepeat to set the Call Alarm’s repeat status (Once,
Daily, Weekly, Monthly, or Yearly).
5. Press Save (left softkey).
Calendar/ Tools
82 Section 2G. Calendarand Tools
Adding To Do List Items
Your phone can store and manage up to 40 To Do List
items.
1. Press Menu > Tools > Calendar.
2. Select a day and press Options (right softkey) >
Add To Do.
3. Enter a description and press .
4. Select an option you want to edit and press .
ⅢCategory to select an event category (Appointment,
Business, Meeting, Personal, Vacation, Travel, or
Miscellaneous).
ⅢPriority to select an event priority (None, High, or
Low).
ⅢDue Time/Date to schedule a due time and date.
ⅢStatus to select a status for the To Do items
(Needs Action or Completed).
5. Press Save (left softkey) to save the To Do items.
Event Alert Menu
When yourphone is turned on and you have an event
alarm scheduled, yourphone alerts you and displays
the event summary. There are several ways your phone
alerts you to scheduled events:
ⅷBy playing the assigned ringertype.
ⅷBy illuminating the backlight.
ⅷBy flashing the LED.
To silence the alarm and reset the schedule, press .
To view additional options, press the appropriate key:
ⅷDismiss (right softkey) clears the event alert.
ⅷPress and hold the side camera key to cancel snooze
mode.
Viewing Events
1. Press Menu > Tools >Calendar.
2. Select the day forwhich you would like to view
events and press . (If you have events scheduled
for the selected day, they will be listed in
chronological order.)
Section 2G. Calendarand Tools 83
3. To display an event’s details, highlight it and
press .
Going to a Specified Date
1. Press Menu > Tools > Calendar > Options (right
softkey) >Go to Date.
2. Enter a date and press .
Deleting a Day’s Events
1. Press Menu > Tools > Calendar.
2. Select the day forwhich you would like to delete
events and press .
3. Press Options (right softkey) > Delete.
4. Select an option and press .
ⅢThis to delete a single event.
ⅢSelect to select and delete multiple events at
one time.
ⅢAll on This List to delete all events on the list.
ⅢCompleted to delete completed To Do Events.
5. Press Yes (left softkey) to delete the event(s).
Deleting Old Events
To delete events scheduled before a specific time and
date:
ᮣPress Menu
> Tools > Calendar > Options (right
softkey)
> Delete Memory > Delete Old > Yes (left
softkey).
Deleting All Events
1.
Press
Menu
> Tools > Calendar > Options (right
softkey)
>Delete Memory > Delete All > Yes (left
softkey). (An alert will be displayed asking you to
confirm the deletion.)
2. Press Yes (left softkey) to delete all events orNo
(right softkey) to cancel.
Tip In the monthly view, days with events scheduled are
indicated by a small triangle just to the left of the
date.
Tip In the monthly view, days with events scheduled are
indicated by a small triangle just to the left of the
date.
Calendar/ Tools
84 Section 2G. Calendarand Tools
Using Your Phone’s Alarm Clock
Your phone comes with a built-in alarm clock that has
multiple alarm capabilities.
1. Press Menu > Tools > Alarm Clock.
2. Select an alarm number and press .
3. Enter a description forthe alarm and press .
4. Select a time for the alarm by selecting the Time field
and pressing .
ⅢUsing yourkeypad or navigation key, set the hours,
minutes, and AM orPM and press .
5. Select a repeating status for the alarm by selecting
the Repeat field and pressing .
ⅢHighlight Once, Daily, Mon – Fri, Sat and Sun, or a
specific day, and press .
6. Turn the alarm on or off by selecting the Alarm field
and pressing .
ⅢSelect On or Off and press .
7. Press Save (left softkey) to save the alarm settings.
Using Your Phone’s Tools
In addition to helping you be more efficient and
organized, your phone offers useful and entertaining
tools.
Using the Calculator
Your phone comes with a built-in calculator.
1. Press Menu > Tools > Calculator.
2. Enter numbers using your keypad.
ⅢPress the appropriate navigation key for an
arithmetic option ( ).
ⅢPress the left softkey to enter decimal points.
ⅢPress CLR (right softkey) to clearall numbers.
3. Press for the result.
Tip Press the left softkey (On or Off) to toggle the alarm
on and off.
To change the alarm settings, press Settings (right
softkey) to set the ringer length and snooze options.
Section 2G. Calendarand Tools 85
Using the World Clock
To view the time in different locations:
1. Press Menu > Tools > World Clock.
2. Press the navigation key left or right to scroll through
different time zones.
Using the Countdown Timer
This feature allows you to use your phone as a
countdown timer to alert when a specified period of time
has elapsed. You can set up to five timers.
1. Press Menu > Tools > Countdown.
2. Select a countdown timer number and press .
3. Select items to edit and press .
ⅢDescription to enter a description of the
countdown.
ⅢTime to enter the countdown time.
ⅢAlarm to set the countdown alarm on or off.
4. Press Save (left softkey) to save the countdown
settings.
Using the Stopwatch
To use the stopwatch:
ᮣPress Menu > Tools > Stopwatch.
ⅢPress the left softkey repeatedly to Start, Stop, or
Resume the stopwatch.
ⅢWhile the stopwatch is running, press Lap (right
softkey) to enter a lap time. You can record up to
five lap times.
To display the stopwatch options:
ᮣFrom the stopwatch display, press Options (right
softkey).
ⅢGo to Lap List to display a saved Lap List. Press
Detail (left softkey) to display the Lap List detail.
ⅢSave to Lap List to save recorded lap times.
ⅢReset to reset the time to zero and clear any
recorded lap times.
Tip Press the left softkey (On or Off) to toggle the
countdown alarm on and off.
To change the alert settings, press Settings (right
softkey) to set the ringer length and snooze options.
Calendar/ Tools
86 Section 2H. Voice Services
Section 2H
Voice Services
ࡗUsing Automatic Speech Recognition (ASR) (page 86)
ࡗVoice and Call Recording (page 89)
ࡗSetting Up Screen Call (page 91)
Your phone’s Voice Services let you place calls using your
voice, store voice reminders, and record memos right on
your phone. This section includes easy-to-follow
instructions for using Automatic Speech Recognition
(ASR) and managing voice and call memos.
Using Automatic Speech
Recognition (ASR)
You can use yourphone’s built-in automatic speech
recognition (ASR) software to dial a phone numberin
yourContacts or to launch phone functions. All you have
to do is to talk into the phone, and ASR will recognize
yourvoice and complete tasks by itself.
Activating ASR
ᮣFrom standby mode, press and hold or .
The screen displays “Say a command” and the phone
prompts you to say the name of the command you want
to use. To complete yourtask, simply follow the voice
prompts.
Available ASR commands are:
ⅷCall <Name or #> to call an entry in your Contacts list
or to the phone number you say.
(See page 87 for details.)
ⅷGo To <Menu> to jump directly to the menu items or
applications. (See page 87 for details.)
ⅷCheck <Item> to check yourphone’s status.
(See page 88 for details.)
Section 2H. Voice Services 87
Making a Voice Call Using ASR
With ASR, you can make a voice call by reciting a name
or phone number.
1. Press and hold or .
2. If you hear“Say a command,” say “Call .”
3. If you hear“Say the name ornumber,”say a name
or a phone number.
4. If you hear“Which location?,” say a number type
(for example, “Mobile”).
Opening Menus Using ASR
You can jump directly to many menu items or
applications by saying “Go to” followed by a menu
option.
1. Press and hold or .
2. If you hear“Say a command,” say “Go To.”
3. If you hear“Which shortcut?,” say an application
name (for example, “Messages”).
4. The menu you have chosen will open.
Tip Say “More options”to display additional
commands.
Note If ASR does not recognize the name or number, it
will find the most likely matches and display a list of
up to three names or numbers. You will hear “Did
you say…” followed by the name or number. You
can confirm by saying “Yes.” Say “No” to change the
selection.
Tip You can skip steps 3 and 4 by saying a name and
location after “Call” without pausing (for example,
“Call John Jones mobile”).
Tip When you display a Command menu, say
“More options”to display additional commands.
During ASR operation, press Help (left softkey) to
get instructions using the software.
Note Use ASR in a quiet environment so it can accurately
recognize your commands.
Voice Services
88 Section 2H. Voice Services
Checking Phone Status Using ASR
You can use ASR to obtain information about your
phone:
ⅷMy Phone Number
ⅷNetwork
ⅷSignal Strength
ⅷBattery
ⅷStatus (all of the previous except My Phone Number)
1. Press and hold or .
2. If you hear“Say a command,” say “Check.”
3. If you hear“Which status item?,” say a command.
ASR Options
To change ASR confirmation:
1. Press and hold or .
2. Press Settings (right softkey) > Confirmation and
select an option.
ⅢAutomatic to ask for confirmation only when the
system is not sure what you said.
ⅢAlways Confirm to always ask forconfirmation.
ⅢNever Confirm to never ask forconfirmation.
To adapt the system to your voice:
1. Press and hold or .
2. Press Settings (right softkey) > Adaptation >
Adapt Voice.
3. Press Start (left softkey) and repeat each word,
phrase, or telephone number you hear.
To reset the adaptation:
1. Press and hold or .
2. Press Settings (right softkey) > Adaptation >
Reset Voice > Yes (left softkey).
To change the ASR mode:
1. Press and hold or .
2. Press Settings (right softkey) >Modes and select an
option.
ⅢExpert Mode to sound a beep only.
ⅢPrompt Mode to prompt for required information.
ⅢReadout Mode to prompt for required information
and to read aloud the content displayed on the
main screen.
Section 2H. Voice Services 89
To change the ASR dialing region:
1. Press and hold or .
2. Press Settings (right softkey) > Dialing region and
select an option.
ⅢNorth America to recognize only numbers valid in
North America.
ⅢOther to recognize any number regardless of
location.
To display the ASR software version:
1. Press and hold or .
2. Press Settings (right softkey) > About.
Voice and Call Recording
Use yourphone’s voice recording to record brief memos
to remind you of important events, phone numbers, or
grocery list items and to record the other party’s voice
during a phone call.
To record a voice memo:
1. Press Menu > Tools > Voice Memo > Record.
2. Start recording after the beep.
To stop recording:
ᮣPress , , or .
Note You can store up to 300 voice memos on your
phone. Maximum recording time is up to eight
hours.
Voice Services
90 Section 2H. Voice Services
To record a phone conversation:
1. During a call, press Options (right softkey) >
Call Memo Rec.
2. Start recording after the beep.
To stop the recording of the conversation:
ᮣPress or . (Recording will also stop when you
disconnect.)
Voice and Call Recording Options
1. Press Menu > Tools >Voice Memo > List.
2. Select Voice(Phone) or microSD (if available).
3.
Select a voice memo and press
Options
(right
softkey).
4. Select an option and press .
ⅢPlay to play selected voice memos or all voice
memos.
ⅢThis to play the selected memo.
ⅢMultiple to play selected memos.
ⅢAll to play all memos.
ⅢSpeaker On or Speaker Off to activate or deactivate
the speakerphone mode.
ⅢEdit Title to edit the title of a voice memo.
ⅢProperties to display information about a voice
memo.
ⅢType Filter to display only voice memos or only call
memos.
ⅢSort by to sort voice memos by time recorded,
name, or file size.
ⅢGo to Time to set the point from which the memo
starts playing.
ⅢGo to microSD/Phone to switch between voice
memos recorded on the microSD card and in the
In Phone folder.
ⅢSend via Bluetooth to send voice memos via
Bluetooth.
ⅢCopy to microSD/Phone to copy selected voice
memos to the microSD card or to the In Phone
folder.
ⅢMove to microSD/Phone to move selected voice
memos to the microSD card or to the In Phone
folder.
ⅢDelete
to delete eitherselected memos or all memos.
Note Press Speed (left softkey) to change playing speed.
Note Only the other party’s voice is recorded during this
process.
Section 2H. Voice Services 91
Deleting Voice and Call Recordings
To delete an individual recording:
1. Press Menu > Tools > Voice Memo > List.
2. Select Voice(Phone) or microSD (if available).
3. Select the memo you want to delete and press
Options (right softkey) > Delete > This > Yes (left
softkey).
To delete all recordings:
1. Press Menu > Tools > Voice Memo > List.
2. Select Voice(Phone) or microSD (if available).
3. Press Options (right softkey) > Delete > All > Yes
(left softkey).
To delete multiple selected recordings:
1. Press Menu > Tools >Voice Memo > List.
2. Select Voice(Phone) or microSD (if available).
3. Press Options (right softkey) > Delete > Multiple.
4. Select the memos you want to delete and press
Delete (left softkey) >Yes(left softkey).
Setting the Recording Mode
This feature allows you to match the sensitivity of the
microphone to the type of recording you are making.
1. Press Menu > Tools > Voice Memo > Settings (left
softkey) >Recording Mode.
2. Select an option and press :
ⅢDictation to record a single voice.
ⅢConference to record multiple voices.
Setting Up Screen Call
You can screen incoming calls by using a recorded
announcement, either a prerecorded one or one that
you record. You can also record the caller’s message.
Activating Screen Call
To start Screen Call when you have an incoming call:
ᮣWhen the phone rings or vibrates, press Options
(right softkey) > Screen Call.
Voice Services
92 Section 2H. Voice Services
To screen calls automatically:
1. Press Menu > Tools > Voice Memo > Screen Call >
Auto.
2. Select On.
3. Set the answer delay.
4. Press OK (left softkey).
(The icon is displayed on the screen.)
Selecting an Announcement for
Screen Call
1. Press Menu > Tools > Voice Memo > Screen Call >
Announcement.
2. Select Pre-Recorded or Custom.
Recording Your Name for a Prerecorded
Announcement
You can use a prerecorded announcement with or
without yourname. If you record your name, your phone
adds it to the prerecorded announcement that you are
not available to answer calls.
1. Press Menu > Tools > Voice Memo > Screen Call >
Announcement.
2.
Highlight Pre-Recorded and press Edit (right softkey)
>
Record Name.
3. Press to start the first recording. (Press to
stop recording. The maximum recording time is 12
seconds.)
4. After the first recording, press again to start the
second recording.
5. Press to stop recording.
Tip While the caller’s message is being recorded, press
TALK to answerthe call, or press END to stop
recording and disconnect the call.
Section 2H. Voice Services 93
Recording a Customized Announcement
1. Press Menu > Tools > Voice Memo > Screen Call >
Announcement.
2. Highlight Custom and press Edit (right softkey) >
Record.
3. Press to start the first recording. (Press to
stop recording. The maximum recording time is
12 seconds.)
4. After the first recording, press again to start the
second recording.
5. Press to stop recording.
Reviewing an Announcement
1. Press Menu > Tools > Voice Memo > Screen Call >
Announcement.
2. Select Pre-Recorded or Custom, and press Edit (right
softkey) > Play or Play:Speaker.
Deleting an Announcement
1. Press Menu > Tools > Voice Memo > Screen Call >
Announcement.
2. Select Pre-Recorded or Custom, and press Edit
(right softkey).
3. Select Delete Name or Delete. (A confirmation will be
displayed.)
4. Press Yes (left softkey).
Voice Services
94 Section 2I. microSD Card
Section 2I
microSD Card
ࡗUsing Your Phone’s microSD Card and Adapter
(page 94)
ࡗFile Manager(page 97)
ࡗmicroSD Settings (page 99)
ࡗmicroSD Folders (page 100)
ࡗBacking Up Your Contacts Data to the microSD Card
(page 100)
ࡗSetting Up the Digital Print Order Format (page 101)
ࡗConnecting YourPhone to Your Computer(page 102)
Your phone lets you use a microSD card and an adapter to
expand the available memory space. This highly secure
digital card enables you to exchange images, music,
and voice data between SD-compatible devices.
Using Your Phone’s microSD
Card and Adapter
Using the microSD Card
Your phone is equipped with a 256 MB microSD (Secure
Digital) memory card and its adapter to expand the
phone’s available memory space. It allows you to store
images, videos, music, and voice data in your phone.
Removing the microSD Card
1. Open the microSD slot and, using your thumbnail or
a flat, blunt object, push the card in slightly and then
release.
2. Gently slide the card out of the slot.
3. Close the slot cover.
Note Your phone comes with the microSD card
preinstalled.
Section 2I. microSD Card 95
Inserting the microSD Card
1. Open the microSD slot cover and insert a microSD
card into the slot with the gold terminals facing up
(see illustration below).
2. Gently press the card until it snaps into place.
3. Close the slot cover.
microSD Icon Indicators
The following icon will be displayed on your phone’s
display screen when a microSD card is properly
inserted into the microSD card slot:
Status Icon Meaning
This icon indicates a microSD
card has been inserted into your
phone. It turns dim while the
microSD card is being accessed.
Note DO NOTremove a microSD card while files are
being accessed or transferred. Doing so will result
in loss or damage of data.
Make sure your battery is fully charged before using
the microSD card. Your data may become
damaged or unusable if the battery runs out while
using the microSD card.
Note Be sure to use only recommended microSD cards
(64MB-4GB). Using non-recommended microSD
cards could cause data loss and damage your
phone.
gold terminals
facing up
Note The microSD card and its adapter can be easily
damaged by improper operation. Please be careful
when inserting, removing, or handling them.
microSD Card
96 Section 2I. microSD Card
Using the microSD Adapter
The supplied microSD adapter allows microSD cards to
be used in SD-compatible devices. Before using, you
will need to insert the microSD card into the microSD
adapter.
To insert the microSD card into the microSD adapter:
ᮣWith the label side of the microSD card facing up,
insert the card into the supplied microSD adapter,
and gently slide the card until it is fully inserted.
To remove the microSD card from the microSD adapter:
ᮣHold the front edge of the microSD card, and gently
pull outward to remove it from the adapter.
Setting Write Protection
The included microSD adapter has built-in write
protection to prevent accidental overwriting or erasure of
yourvital data.
ᮣSlide the write-protect tab down to the “Lock”
position to prevent overwriting data. To enable
writing or reading data on the microSD card, slide
the write-protect tab back up to the normal position.
Write-Protect
Tab
LOCK
Section 2I. microSD Card 97
File Manager
File Manager allows you to manage files such as
pictures, videos, music, and applications stored in your
phone or on the microSD card.
Accessing File Manager
1. Press Menu > Tools > File Manager.
2. Select an option and press .
ⅢPhone to access the files in yourphone.
(The following preset folders will be displayed:
My Albums, Voice, and Bluetooth.)
ⅢmicroSD to access the files on yourmicroSD card.
(The following preset folders will be displayed:
DCIM, VIDEO, MUSIC, VOICE, SD_PIM and
BLUETOOTH.)
ⅢmicroSD Options allows you to manage additional
tools such as DPOF Print, Format, Create Folders, or
Save Contacts.
File Manager Icons
Opening Files in the File Manager
1. Press Menu > Tools > File Manager > Phone or
microSD.
2. Select a folder and press .
3. Use your navigation key to select an item you wish
to open.
Content Type Icon File Extension
Picture
jpeg, jpg, wbmp, png, bmp, gif
Video
m4v, mp4, 3gp, 3gpp, 3gp2, 3g2, wmv, asf
Audio
mp3, aac, m4a, amr, wma
qcp, uvo
mid, midi
pmd
Contacts
vcf
Calendar
vcs
Unknown
unsupported file format
microSD Card
98 Section 2I. microSD Card
Using File Manager Options
When you are in the file manager, several useroptions
are available by selecting Options (right softkey).
ⅷMove to move a file from the current folder to another
folder in your phone.
ⅷCopy to copy a file from the current folderto another
folder in your phone.
ⅷDelete to delete a file or folderfrom File Manager.
ⅷImport to import a Contacts file or a calendar file.
ⅷPlay/Listen/View to play a video, listen to audio, or view
a picture.
ⅷSort by to sort folder contents by name, date, orsize.
ⅷProperties to view a selected file’s properties.
ⅷRename to change the name of a selected file.
ⅷSet as to set images as your wallpaper, screen saver,
or Caller ID for Contacts entries.
ⅷMove to microSD to move a file to your microSD card.
ⅷMove to Phone to move a file to your phone.
ⅷCopy to microSD to copy a file to yourmicroSD card.
ⅷCopy to Phone to copy a file to yourphone.
ⅷGo to microSD to use File Manager with the microSD
card.
ⅷGo to Phone to use File Manager with yourphone.
ⅷSend via Bluetooth send a file via Bluetooth. (See
page 128.)
ⅷPrint to print an image by using Bluetooth. (See
page 127.)
ⅷUse Bluetooth to play an audio file through a Bluetooth
device.
ⅷList/Thumbnail to switch between list view and
thumbnail view.
ⅷCreate Folders to create preset folders on the microSD
card. (See “Accessing File Manager” on page 97.)
ⅷView Memory to view the used and available memory
space.
Note You may not be able to use the file if you change the
file name extension.
Section 2I. microSD Card 99
Sorting the Folder Contents
1. Press Menu > Tools > File Manager > Phone or
microSD.
2. Select a folder and press .
3. Press Options (right softkey) > Sort by.
4. Select an item (Name, Size, or Date) and press .
5. Select Ascending or Descending.
Viewing Memory in File Manager
1. Press Menu > Tools > File Manager > Phone or
microSD.
2. Press Options (right softkey) > View Memory.
(The used and available memory space will be
displayed.)
microSD Settings
Creating Folders in the microSD Card
The following steps allow yourphone to create default
folders for storing files in your microSD card.
1. With the microSD inserted, press Menu > Tools >
File Manager > microSD Options.
2. Select Create Folders and press . (The phone will
create the microSD’s default folders: DCIM, VIDEO,
MUSIC, VOICE, SD_PIM, and BLUETOOTH.)
Formatting the microSD Card
Formatting a microSD card permanently removes all
files stored on the card.
1. With the microSD inserted, press Menu > Tools >
File Manager >microSD Options.
2. Select Format and press . (A warning will be
displayed.)
3. If you are sure you wish to remove all the files from
yourmicroSD card, press Yes (left softkey).
microSD Card
100 Section 2I. microSD Card
microSD Folders
Displaying Your microSD Folders
All the files stored in yourmicroSD are accessible
through yourmicroSD card folders.
1. With the microSD inserted, press Menu > Tools >
File Manager > microSD.
2. Select a folder (DCIM, VIDEO, MUSIC, VOICE, SD_PIM,
or BLUETOOTH) and press .
3. To view or play a file, select it and press or the
appropriate softkey.
Backing Up Your Contacts Data to
the microSD Card
You can easily back up yourphone’s Contacts data to
the microSD card.
1. Press Menu > Tools > File Manager > microSD Options.
2. Select Save Contacts.
3. Press Yes (left softkey) to proceed. (Please wait while
the system creates your data.)
4. Press OK (left softkey) to complete.
Note DO NOT remove your microSD card while files are
being accessed or transferred. It will result in a loss
of or damage to the data.
Note The formatting procedure deletes all the data on
the microSD card, after which the files CANNOTbe
retrieved. To prevent the loss of important data,
please check the contents before you format the
card.
Section 2I. microSD Card 101
Setting Up the Digital Print Order
Format
Digital Print Order Format (DPOF) is a feature that allows
you to set up your digital picture print orders in advance.
You can use it to set options such as which pictures to
print, the number of prints foreach picture, and index
print settings.
1. With the microSD inserted, press Menu > Tools >
File Manager > microSD Options > DPOF Print.
2. Select a print mode from Standard Print or Index Print.
ⅢStandard Print
to print the image at its standard size.
ⅢIndex Print to print an index sheet of thumbnail
images.
3. Press Options (right softkey) and select an option
from the following.
ⅢSelect Picture to select the picture(s) you want to
print. (You may select up to 99 pictures.)
ⅢPicture Info to display picture(s) information.
ⅢUnselect Picture to unselect the picture(s) you have
selected.
ⅢSet No. of Copies to set the number of copies you
want to print. (The maximum number of copies
that you can select is 99 copies.)
4. When you have finished setting the print options,
press Save (left softkey).
ⅢIf you are setting the print options for standard
prints, you will be prompted to choose whether to
print the date. Select Yes or No. (Depending on
yourprinter, some options may not be available.)
Clearing a DPOF Print Order
You can clear a DPOF print order for standard prints and
index prints at the same time.
1. With the microSD inserted, press Menu > Tools >
File Manager > microSD Options > DPOF Print.
2. Select Clear Order.
Note Pictures saved on your microSD card that were not
taken with your phone may not be printable.
microSD Card
102 Section 2I. microSD Card
Reviewing an Order Summary
1. With the microSD inserted, press Menu > Tools >
File Manager > microSD Options > DPOF Print.
2. Select Order Summary. (The selected print options
will be displayed.)
ⅢPress Switch (right softkey) to switch the display
between Standard Print and Index Print.
Connecting Your Phone to Your
Computer
Before using yourphone’s mass storage capabilities,
you need to prepare your phone’s data services to
synchronize with your desktop or laptop computer.
Once the phone is connected to the computer, you can
transferyour data to or from the microSD card.
Using Mass Storage
1. With the microSD inserted, press Menu > Tools >
Mass Storage. (A warning will be displayed.)
2. Select OK (left softkey).
3. Connect yourphone to your computer using the
included USB cable. (Wait for the connection to be
completed. When connected, the host computer
will automatically detect yourphone.)
To remove the connection:
ᮣWhen you have finished transferring data, click the
USB device icon on your computer’s taskbar, and
follow the onscreen instructions to safely unplug the
USB cable. (The process may vary depending on
your computer.)
Transferring Music to the microSD Card
Before using this feature, you must install the Sprint
Music Manager application on your computer. To install
it, please see the Experience SprintSpeed guide that was
included with yourphone.
1. Press Menu >Tools > Transfer Music.
2. Connect your phone to your computer using the
included USB cable. (Wait for the connection to be
completed. When connected, the host computer
will automatically detect your phone.)
Section 2I. microSD Card 103
Important Connection Information
ⅷNo driverinstallation is required forWindows
2000/ME/XP users. If you use Windows 98/98SE, you
have to download and install the USB Mass Storage
Driverfrom the Sprint Web site at www.sprint.com.
ⅷTo avoid loss of data, DO NOTremove the USB cable,
the microSD card, or the battery while files are being
accessed or transferred.
ⅷDO NOT use your computerto change or edit folderor
file names on the microSD, and do not attempt to
transfer large amounts of data from the computerto
the microSD card. Doing so may cause the microSD
card to fail.
ⅷDO NOT turn off or restart your computer, or put it into
standby mode, while using a mass storage device.
Doing so will result in loss or damage of data.
ⅷWhile you are connected to the computer, your
phone’s screen will display “Phone Off.” You cannot
make orreceive calls.
ⅷIf you connect a mass storage device to a peripheral
device, your device may not work properly.
microSD Card
104 Section 2J. Camera
Section 2J
Camera
ࡗTaking Photos (page 104)
ࡗRecording Videos (page 110)
ࡗStoring Photos and Videos (page 113)
ࡗSending Sprint Picture Mail (page 115)
ࡗManaging Sprint Picture Mail (page 117)
ࡗPrinting Photos Directly From Your Phone (page 119)
Your phone’s built-in camera gives you the ability to take full-
color digital pictures, view your pictures using the phone’s
display, and instantly send them to family and friends. It’s fun,
and it’s as easy to use as a traditional point-and-click
camera: just take a picture, view it on yourphone’s
display, and send it from yourphone to up to 25 people.
Taking Photos
Taking pictures with yourphone’s built-in camera is as
simple as choosing a subject, pointing the lens, and
pressing a button. You can activate the phone’s camera
mode whether the phone is open orclosed.
To take a picture with the phone open:
1. Press and hold to activate camera mode.
(Additional camera options are available through
the camera mode Options menu. See “Camera
Mode Options” on page 106 for more information.)
2. Using the phone’s main screen as a viewfinder, aim
the camera lens at your subject.
3. Press Capture (left softkey), , , or the side
camera key until the shutter sounds. (The picture
will automatically be saved in your selected storage
area.)
ⅢTo return to camera mode to take another picture,
press .
Tip To activate camera mode, you can also select
Menu > Photos > Camera.
Section 2J. Camera 105
4. Press Options (right softkey) formore options:
ⅢTake New Picture to return to camera mode to take
another picture.
ⅢSend Media to send yourpicture. (See page 115
for details.)
ⅢPrint to print the pictures. You can choose whether
to pick up yourprints at a retail store, use a
PictBridge-enabled printer (see page 119), or use
a Bluetooth-enabled printer (see page 127).
ⅢPost to Services to access available services.
Select Update to display the latest services.
ⅢUpload to upload the picture to the Sprint Picture
Mail Web site (www.sprint.com/picturemail).
ⅢReview Media to go to the In Phone folder or
microSD folder to review yoursaved pictures.
ⅢSend via Bluetooth to send the picture via
Bluetooth.
ⅢSet as to assign the picture. Select an option and
press .
ⅢDelete to delete the picture you just took.
ⅢDetails/Edit to edit or display details relating to your
pictures.
To take a picture with the phone closed:
1. Press and hold the side camera key to activate
camera mode.
2. Point the camera lens at your subject. (You can
check the picture framing through the external
display screen.)
3. Press the side camera key to take the picture. (The
picture will automatically be saved in yourselected
storage area.)
Registering Your Sprint Picture Mail
Account
The first time you use any of the picture management
options involving the Sprint Picture Mail Web site, you
will be prompted to register your Sprint Picture Mail
account and establish a password through yourphone.
This password will also allow you to sign in to the Sprint
Picture Mail Web site at www.sprint.com/picturemail to
access and manage youruploaded pictures and
albums.
1. Press Menu > Photos > My Albums > Online Albums.
(You will be prompted to register your Sprint Picture
Mail account.)
Camera
106 Section 2J. Camera
2. Enter a password for your Picture Mail account and
press . (You will be prompted to confirm your
password.)
3. Please wait while the system creates youraccount.
Once you have received confirmation that your account
has been successfully registered, you may upload and
share pictures and access the Sprint Picture Mail Web
site.
Camera Mode Options
When the phone is open and in camera mode, press
Options (right softkey) to display additional camera
options:
ⅷPicture Mode to select a picture mode from Normal,
Beach/Snow, Scenery, MirrorImage, or Night/Dark.
ⅷZoom to zoom in on a subject. (See “Using the Zoom”
on page 108 for details.)
ⅷSelf-Timer to activate the camera’s timer. (See “Setting
the Self-Timer” on page 107 fordetails.)
ⅷFun Tools to select an option from the following:
ⅢMultiple Shots to take multiple shots. (See “Taking
Multiple Shots” on page 107.)
ⅢFun Frames to select your favorite fun picture frame
to decorate your picture.
ⅢColorTone to select a wide variety of color tones for
the picture.
Note Fun Frames is not available when the resolution
setting is 1.3M. (See “Selecting Camera Settings”on
page 109 for details.)
Tip Write down your Sprint Picture Mail password in a
secure place.
Note If your Sprint service plan does not include Sprint
Picture Mail, you will first be prompted to subscribe
to the service for an additional monthly charge.
Section 2J. Camera 107
ⅷImage Controls to select an option from Brightness,
White Balance, Sharpness, or Contrast.
ⅷCamera Settings to select your settings. (See “Selecting
Camera Settings” on page 109 for details.)
ⅷReview Media to go to the In Phone folder ormicroSD
folder to review yoursaved pictures.
ⅷCamcorderMode to switch to video mode.
(See “Recording Videos” on page 110 for details.)
ⅷKey Guidance to indicate the key functions in camera
mode.
ⅷUserSettings to select your favorite setting.
(See “Camera Mode Options”on page 106.)
Setting the Self-timer
1. From camera mode, press Options (right softkey) >
Self-Timer.
2. Highlight the length of delay you want the timer to
use (10 Seconds or 5 Seconds) and press .
3. Press Start(left softkey) when you are ready to start
the timer. ( is displayed on the upperright portion
of the main screen during the self-timer
countdown.)
4. Get ready for the picture. (When the timer is down to
three seconds, the self-timer icon will turn red and
the phone will begin to beep.)
To cancel the self-timerafter it has started:
ᮣPress Cancel (right softkey).
Taking Multiple Shots
This feature allows you to take up to nine shots in a
continuous sequence. When you take multiple shots,
the icon will be displayed in the viewfinder.
1. From camera mode, press Options (right softkey) >
Fun Tools > Multiple Shots.
2. Select an available option (3 Shots, 6 Shots, 9 Shots,
or Off)and press .
Note When taking multiple shots, the resolutions is
temporarily set to Low-240x320.
Note While the self-timer is active, all keys are disabled
except BACK,END, and Cancel (right softkey).
Camera
108 Section 2J. Camera
3. Select the duration of the interval between shots
(Normal or Fast) and press .
4. Press Capture (left softkey), , , or the side
camera key to take the pictures. (The Multiple Shots
folder will display up to nine thumbnail pictures per
screen.)
5. Press Options (right softkey) to display picture
options, or press to return to Camera mode to
take anotherpicture.
Using the Zoom
This feature allows you to zoom in on an object when
you take a picture. Depending on yourresolution
settings, you can adjust the zoom from 1x to 12x.
1. From camera mode, press the navigation key right
or left, or the volume key up or down to adjust the
zoom. (The gauge bar is displayed.)
2. Press Capture (left softkey), , , or the side
camera key to take the picture. (The picture will
automatically be saved in your selected storage
area.)
Note After taking multiple shots, the pictures are
automatically saved in your selected storage area.
Section 2J. Camera 109
Selecting Camera Settings
1. From camera mode, press Options (right softkey) >
Camera Settings.
2. Select an option and press :
ⅢResolution to select a picture’s file size
(1.3M-960x1280, Medium-480x640, or
Low-240x320).
ⅢQuality to select the picture quality setting (Fine,
Normal, or Economy).
ⅢShutterSound to select a shutter sound (Default,
Say “Cheese,”“Ready,”or Off).
ⅢStatus Bar to switch the status bar display On or Off.
ⅢAuto Save to to select the storage area for the
pictures (In Phone, In microSD, or Switch w/Card).
(See “Setting Storage Options” on page 113.)
ⅢSave Setting to select the way to save pictures
(Auto or Manual).
Camera Icon Key
Function
Storage
Area
Picture
Mode
White
Balance
Use this setting for sunny weather.
Use this setting for cloudy weather.
Use this setting for incandescent lighting.
Use this setting for fluorescent lighting.
To set the white balance manually.
Brightness
Sharpness
Contrast
To set brightness manually.
To set sharpness manually.
To set contrast manually.
Use this setting in bright light.
Use this setting for scenery at a distance.
Use this setting to take a mirror image.
Use this setting in low light.
In Phone
In microSD
Beach/Snow
Scenery
Mirror Image
Night/Dark
Sunny
Cloudy
Tungsten
Fluorescent
Manual
Manual
Manual
Manual
Appears when the storage destination is the microSD.
Appears when the storage destination is your phone.
Icon Details
Self-Timer
Numeric countdown will appear when the
self-timer has been activated.
Multiple Shots
Use this setting for multiple shots.
Resolution
For 1.3-megapixel picture resolution.
For medium picture resolution.
For low picture resolution.
1.3M
Medium
Low
Camera
110 Section 2J. Camera
RecordingVideos
In addition to taking pictures, you can also record, view,
and send videos to yourfriends and family with your
phone’s built-in video camera.
1. Press Menu > Photos > Camcorder to activate video
mode. (Additional video options are available
through the video mode Options menu. See “Video
Mode Options” on page 111 for more information.)
2. Using the phone’s main screen as a viewfinder, aim
the camera lens at your subject.
3. Press Record (left softkey), , , or the side
camera key to begin recording.
4. Press , Stop (right softkey), or the side camera
key to stop recording. (The video will automatically
be saved in your designated storage area.)
5. Press Options (right softkey) for more options:
ⅢTake New Video to return to video mode to take
another video.
ⅢPlay to play the video you just took.
ⅢSend Media to send your video. (See page 115 for
details.)
ⅢPost to Services to access available services.
Select Update to display the latest services.
ⅢUpload to upload the video you just took to the
Sprint Picture Mail Web site.
ⅢReview Media to go to the In Phone folder or
microSD folder to review yoursaved videos.
ⅢSend via Bluetooth to send the video via Bluetooth.
ⅢSet as to assign the video. Select an option and
press .
ⅢDelete to delete the video you just took.
ⅢDetails/Edit to edit or display details relating to your
videos.
To take a video with the phone closed:
1. Press the side camera key to activate the launch
menu.
2. Select Camcorder.
3. Point the camera lens at your subject. (You can
check the video framing through the outer screen.)
Section 2J. Camera 111
4. Press the side camera key to start recording.
5. Press the side camera key again to stop recording.
Video Mode Options
Several options are available from video mode.
Press Options (right softkey) to display additional
options:
ⅷVideo Mode to select a video mode from Normal,
Beach/Snow, Scenery, Mirror Image, or Night/Dark.
ⅷZoom to zoom in on an object. You can adjust the
zoom from 1x to 12x.
ⅷSelf-Timer to activate the timer function. (See “Setting
the Self-Timer” on page 107 fordetails.)
ⅷColorTone to select a wide variety of color tones for
your video.
ⅷImage Controls to select an option from Brightness,
White Balance, or Contrast.
ⅷVideo Settings to select your settings. (See “Selecting
Video Settings” on page 112 for details.)
ⅷReview Media to go to the In Phone folder ormicroSD
folder to review yoursaved videos.
ⅷCamera Mode to switch to camera mode (if applicable).
ⅷKey Guidance to indicate the key functions in video
mode.
ⅷUser Settings to select your favorite setting. (See
“Video Mode Options” on page 111.)
Note When taking a video with the phone closed, the
subject image appears in reverse on the external
display. The captured image will not be saved in
reverse.
Camera
112 Section 2J. Camera
Selecting Video Settings
1. From video mode, press Options (right softkey) >
Video Settings.
2. Select an option and press .
ⅢResolution to select a file size (High-176x144 or
Medium-128x96) fora video.
ⅢQuality/Length to select video quality from
Normal-35sec., Fine-25sec., or 120min.microSD.
ⅢSilent Movie to select On to record without sound.
Select Off to deactivate this feature.
ⅢCue Sound to select a cue sound (Default,
“Action & Cut,” “Ready & Stop,”or Off).
ⅢFit to Screen or Actual Sizeto switch the viewing
size.
ⅢSkins to select yourfavorite frame.
ⅢAuto Save to to select the storage area for the
videos. (See “Setting Storage Options”on
page 113.)
Video Icon Key
Function
For high video resolution.
For medium video resolution.
Icon
Resolution
High
Medium
Appears when the silent movie setting is on.
Appears when the silent movie setting is off.
Silent
Movie
On
Off
Manual
Beach/Snow
Scenery
Mirror Image
Night/Dark
Manual
In Phone
In microSD
Sunny
Cloudy
Tungsten
Fluorescent
Manual
Appears when the storage destination is the microSD.
Appears when the storage destination is your phone.
Brightness
Storage
Area
White
Balance
Video
Mode
Contrast
To set brightness manually.
Details
Self-Timer
Numeric countdown will appear when the
self-timer has been activated.
Use this setting for sunny weather.
Use this setting for cloudy weather.
Use this setting for incandescent lighting.
Use this setting for fluorescent lighting.
To set the white balance manually.
Use this setting in bright light.
Use this setting for scenery at a distance.
Use this setting to take a mirror image.
Use this setting in low light.
To set contrast manually.
Note Recording time varies depending on the
Quality/Length setting.
Section 2J. Camera 113
Storing Photos and Videos
Your phone’s picture and video storage area is called
My Albums.
There are three types of folders in My Albums:
ⅷIn Phone (see below)
ⅷIn microSD (see “microSD Picture and Video Folders”
on this page)
ⅷOnline Albums (see page 117)
Setting Storage Options
1. Press Menu > Photos > Settings & Info > Auto Save to.
2. Select In Phone, In microSD, or Switch w/Card.
(Switch w/Card stores pictures to the In Phone folder
if no microSD card is installed.)
In Phone Folder
Your phone’s internal storage area is called the In Phone
folder. From the In Phone folder, you can view all the
pictures and videos you have stored there, send items to
the Sprint Picture Mail site (www.sprint.com/picturemail),
delete files, and access additional options.
To review your stored pictures and videos in the In Phone
folder:
1. Press Menu > Photos > My Albums > In Phone.
2. Use yournavigation key to view and scroll through
the pictures and videos.
microSD Picture and Video Folders
You can save pictures and videos directly to the
microSD card using yourphone’s pictures and videos
settings. A total maximum of 1000 pictures and videos
can be stored and managed in each folder on the
microSD.
To review your stored pictures and videos in the microSD:
1. Press Menu > Photos > My Albums > In microSD.
2. Use yournavigation key to scroll through and view
saved pictures and videos.
Camera
114 Section 2J. Camera
In Phone Folderand microSD File Options
When you are viewing the In Phone folder or the
microSD card folders, press Options (right softkey) to
display the following options:
ⅷPlay to play your videos.
ⅷSend Media to send your pictures and videos. (See
page 115 for details.)
ⅷUpload to upload pictures and videos from the In
Phone folder ormicroSD to the Sprint Picture Mail
Web site (www.sprint.com/picturemail).
ⅷPrint to print the pictures. You can choose whether to
pick up yourprints at a retail store, use a PictBridge-
enabled printer(see page 119), oruse a Bluetooth-
enabled printer (see page 127).
ⅷPost to Services to access available services. Select
Update to display the latest services.
ⅷSend via Bluetooth to send the pictures and videos via
Bluetooth.
ⅷSet as to assign the picture or video. Select an option
and press .
ⅷDelete to delete pictures and videos.
ⅷCopy/Move to SD to copy or move pictures and videos
from yourphone to your microSD card.
ⅷCopy/Move to Ph. to copy or move pictures and videos
from the microSD card to yourphone.
ⅷCopy/Move to copy ormove pictures and videos from
a microSD card folder to anothermicroSD card folder
or from an Online Albums folderto another Online
Albums folder.
ⅷDetails/Edit to edit or display details relating to your
pictures or videos.
ⅷSlideshow to view your pictures in slideshow mode.
ⅷMedia Filter to filter only pictures, only videos, or to
display all media files.
ⅷAlbum List to display the album list.
ⅷCamera Mode to activate camera mode.
ⅷCamcorder Mode to activate video mode.
Note Deleting data will free up memory space to enable
you to take more pictures and videos. Once
deleted, the data cannot be uploaded to your online
Sprint Picture Mail account or saved to the microSD
card oryour phone.
Section 2J. Camera 115
Assigned Media Folder
When you assign a picture or video, it will automatically
be saved in the Assigned Media folder. The folder allows
you to store copies of pictures orvideos on your phone
and to assign pictures and videos to various phone
tasks.
To save a picture or video to the Assigned Media folder:
1. From the In Phone folder (see “In Phone Folder” on
page 113) orthe In microSD folder (see “microSD
Picture and Video Folders”on page 113), select a
picture or video you wish to save to the Assigned
Media folder and press .
2. Press Options (right softkey) >Set as.
3. Select an option and press . (A copy of the
picture or video will automatically be saved to the
Assigned Media folder.)
To view pictures and videos stored in the Assigned Media
folder:
1. Press Menu > Tools > Assigned Media.
(Thumbnails will be displayed, up to nine at a time.)
2. Use yournavigation key to view and scroll.
Sending Sprint Picture Mail
Once you have taken a picture or a video, you can use
the messaging capabilities of yourphone to instantly
share it with family and friends. You can send pictures
and videos to up to 25 people at a time using their email
addresses or theirphone numbers.
Sending Photos and Videos From the
In Phone Folder
1. Press Menu > Photos > My Albums > In Phone.
2. Select a picture or video to send and press .
(The check box in the lower right corner will be
marked. You can select multiple pictures and
videos.)
3. Press Options (right softkey) > Send Media. (You will
see a message.)
Note The first time you send Sprint Picture Mail, you will
be prompted to registeryour Sprint Picture Mail
account. (See “Registering Your Sprint Picture Mail
Account”on page 105.)
Camera
116 Section 2J. Camera
4. Follow step 2 of “Composing SMS Text Messages”
on page 136.
5. If you wish to include a text message, scroll to Text,
and then enter your message.
6. If you wish to include a voice message, scroll to
Audio and press Record (right softkey) >to
record. (Maximum recording time is 10 seconds.)
7. To set the priority, scroll to Priority, and then select
High, Normal, or Low.
8. Confirm the recipients, message, voice memo, and
pictures or videos. (You may also select additional
options by pressing the right softkey. Follow the
onscreen instructions to add available options.)
9. Press Send (left softkey) to send the pictures and
videos.
Sending Photos and Videos From
Messages
You can also send Sprint Picture Mail from yourphone’s
Messages menu.
1. Press Menu > Messages > Picture Mail.
2. Follow step 2 of “Composing SMS Text Messages”
on page 136.
3. Select a picture or video from In Phone, In microSD, or
Online Albums and press > Next (left softkey).
(You can also choose to take a new picture or a new
video.)
4. To complete and send the message, follow steps
5–9 in “Sending Photos and Videos From the In
Phone Folder”on this page.
Section 2J. Camera 117
Managing Sprint Picture Mail
Using the Sprint Picture Mail Web Site
Once you have uploaded pictures orvideos to your
online Sprint Picture Mail account at
www.sprint.com/picturemail (see “In Phone Folder and
microSD File Options” on page 114), you can use your
computer to manage your pictures. From the Sprint
Picture Mail Web site, you can share pictures and
videos, edit album titles, add captions, and organize
images. You can even send your pictures to be printed at
participating retail locations.
You will also have access to picture management tools
to improve and customize your pictures. You’ll be able to
lighten, darken, crop, add antique effects, add comic
bubbles and cartoon effects, and use other features to
transform your pictures.
To access the Sprint Picture Mail Web site:
1. From yourcomputer’s Internet connection, go to
www.sprint.com/picturemail.
2. Enter yourphone number and Sprint Picture Mail
password to register. (See “Registering Your Sprint
Picture Mail Account”on page 105.)
Managing Online Photos and Videos
From Your Phone
Use yourphone to manage, edit, or share pictures and
videos you have uploaded to the Sprint Picture Mail Web
site at www.sprint.com/picturemail. (See “In Phone Folder
and microSD File Options” on page 114 for information
about uploading.)
To view your online pictures and videos from your phone:
1. Press Menu > Photos > My Albums > Online Albums.
(Depending on yoursettings you may be prompted
to accept a Sprint Power Vision connection.) (The
Uploads folder and your albums are displayed.)
2. Select Uploads or an available album title and press
to display. (Thumbnail pictures, up to nine per
screen, are displayed.)
3. Select a picture or video and press Options (right
softkey) to display youronline picture or video
options.
Tip To expand a selected picture from thumbnail to full-
screen, press Expand (left softkey).
Camera
118 Section 2J. Camera
Uploading Photos and Videos
1. Press Menu > Photos > My Albums > In Phone.
2. Check the picture(s) and video(s) you wish to
upload and press Options (right softkey) > Upload.
3. Select This,Selected, or All.
4. Select “Uploads” Area or OtherAlbums.
DownloadingYour Online Photos and
Videos
From youronline Sprint Picture Mail albums display at
www.sprint.com/picturemail, you can select pictures and
videos to download to yourphone’s In Phone folder or
microSD card.
1. From the online pictures display, select the pictures
and videos you wish to download and press Options
(right softkey). (See “Managing Online Photos and
Videos From Your Phone” on page 117.)
2. Select Save to.. >In Phone or In microSD >.
Accessing Online Picture and Video
Options From Your Phone
1. Select a picture or video from your Online Albums.
(See “Managing Online Photos and Videos From
YourPhone” on page 117.)
2. Press Options (right softkey) to display options.
3. Select an option and press .
ⅢPlay to play the video.
ⅢSend Media to send your picture orvideo.
ⅢOrder Prints to order prints of the pictures. You can
pick up yourprints at a retail store.
ⅢPost to Services to access available services.
Select Update to display the latest services.
ⅢSet as to assign the picture or video.
ⅢSave to.. to select In Phone or In microSD to
download the pictures and videos to the selected
storage area.
ⅢDelete to delete pictures and videos saved in the
current album (or Uploads folder).
ⅢCopy/Move to copy ormove pictures and videos to
a selected album.
Section 2J. Camera 119
ⅢDetails/Edit to edit or display details relating to your
pictures or videos.
ⅢMedia Filter to filter only pictures, only videos, or to
display all media files.
ⅢAlbum List to display the album list.
To access your online Albums options from your phone:
1. Display the album list in the online Sprint Picture
Mail menu. (See “Managing Online Photos and
Videos From Your Phone” on page 117.)
2. Select an album (or Uploads folder).
3. Press Options (right softkey) to display options.
4. Select an option and press .
ⅢEdit/Delete to select an option from the following:
ⅷDelete Album to delete the selected album.
ⅷRename Album to rename the selected album.
ⅷAlbum Info to display detailed information about
the album.
ⅢCreate New Album to create a new album. Entera
new album name and press > Save (left
softkey).
Printing Photos Directly From
Your Phone
Your phone is PictBridge compatible, allowing you to
print directly from yourphone without connecting to a
computer. Simply connect your phone to a PictBridge-
enabled printer and enjoy printing your photos.
To print pictures directly from your phone:
1. Press Menu > Photos > PictBridge.
2. Connect yourphone to the PictBridge-enabled
printer using the included USB cable.
(Wait until the connection is completed.)
3. Set the printer settings using yournavigation key.
ⅢPicture to Print: You can select the picture from the
In Phone folder orthe microSD. (You can select up
to 99 pictures; however you can only select from
one folder.)
Note Make sure your battery is fully charged before using
the PictBridge.
While using the PictBridge, the battery cannot be
charged.
Note The Uploads folder cannot be deleted or renamed.
Camera
120 Section 2J. Camera
ⅢLayout: You can select the print mode from
Default Printer, Standard Print, Index Print, or
DPOF Print. (If you have selected DPOF Print, press
Yes [left softkey] to print. To set up the DPOF Print,
see “Setting Up the Digital Print OrderFormat”on
page 101.)
ⅢNum. of Copies: You can set the number of copies
(1-10). (You cannot specify numberof copies
when Index Print is selected.)
ⅢPrint Size: You can set the print size from Default
Printer, 4x6, 5x7, 8x10, or Letter. (Print sizes may
vary according to the type of printer you have.)
ⅢDate Stamp: You can imprint the date on your
pictures. Select Yes or No. (Date stamping may not
be available depending on the type of printer you
have.)
4. When you have finished selecting the printer
settings, select Print.
5. When printing is finished, press .
6. Press Yes (left softkey). Follow the instructions on the
display to unplug the USB cable from the phone.
PictBridge
Error
Messages
From time to time you may encounter
printing problems. Any printererror
messages will be displayed on your phone,
informing you of the specific problems
encountered. Please refer to the user’s guide
that came with your printer for descriptions,
explanations, and possible resolutions for
any error messages.
Note While you are connected to the printer, your
phone’s screen will display “Phone Off.” You cannot
make or receive calls during this time.
Note You may not be able to print pictures that you
cannot display on your phone.
Section 2K. Bluetooth 121
Section 2K
Bluetooth
ࡗTurning Bluetooth On and Off (page 121)
ࡗUsing the Bluetooth Menu (page 122)
ࡗUsing the Bluetooth Settings Menu (page 124)
ࡗBluetooth Profiles (page 124)
ࡗPairing Bluetooth Devices (page 126)
ࡗUsing the Trusted Devices Options (page 126)
ࡗPrinting Data via Bluetooth (page 127)
ࡗSending Data via Bluetooth (page 128)
Your phone features built-in Bluetooth technology, allowing
you to share information more easily than ever before.
Bluetooth is a short-range communications technology
that allows you to connect wirelessly to a number of
Bluetooth devices, such as headsets and hands-free
car kits, and Bluetooth-enabled handhelds, computers,
printers, and wireless phones. The Bluetooth
communication range is usually up to approximately
30 feet.
Turning Bluetooth On and Off
By default, yourdevice’s Bluetooth feature is turned off.
Turning Bluetooth on makes your phone “discoverable”
by otherin-range Bluetooth devices. To make your
phone visible to other devices you must also set your
phone’s visibility to otherthan Hidden. (See page 124.)
To turn Bluetooth on:
1. Press Menu > Settings > Bluetooth > On/Off.
2. Select On and press to enable Bluetooth.
To turn Bluetooth off:
1. Press Menu > Settings > Bluetooth > On/Off.
2. Select Off and press to disable Bluetooth.
Bluetooth
122 Section 2K. Bluetooth
Bluetooth Status Indicators
The following icons show yourBluetooth connection
status at a glance:
– Bluetooth feature is active. (The icon will dim
when the phone is connected with another
Bluetooth device.)
– Your phone is discoverable by another
Bluetooth device.
– Your phone is communicating with a
Bluetooth device.
–
Your phone is connected to or communicating
with a Bluetooth device via Hands-free Profile (HFP).
–
Your phone is connected to or communicating
with a Bluetooth device via Advanced Audio
Distribution Profile (A2DP).
–
Your phone is connected to or communicating
with a Bluetooth device via both Hands-free Profile
(HFP) and Advanced Audio Distribution Profile
(A2DP).
Using the Bluetooth Menu
The Bluetooth menu allows you to access yourphone’s
Bluetooth functions.
To access the Bluetooth menu:
ᮣPress Menu > Tools > Bluetooth to select from the
following options.
ⅢHandsfree Pairing to find a Bluetooth headset or
hands-free device and add it to yourTrusted List.
ⅢSend Contact to send a Contacts entry saved on
yourphone to another Bluetooth device.
ⅢPrint Picture to print pictures stored in your phone
using a Bluetooth-enabled printer.
ⅢAdd to Trusted to add a Bluetooth device to your
Trusted List. (You can specify the type of device to
search for.)
ⅢTrusted List to display a list of trusted Bluetooth
devices. Select <Add New> to find another
Bluetooth device.
ⅢSend BizCard to send your business card to
another Bluetooth device.
Section 2K. Bluetooth 123
Find Me
If you are going to use a Bluetooth profile to pairwith a
Bluetooth device, you will need to allow the other device
to initiate pairing with yourphone.
1. Press Menu > Tools > Bluetooth > Find Me (left
softkey).
2. Follow the onscreen prompts to enteryour PIN and
press .
Block List
You can prevent other Bluetooth devices from
connecting with your phone.
To add a device to the Block List:
1. Press Menu > Tools > Bluetooth > More... > Block List.
2. Select <Add New>.
3. Select Search or View Trusted.
ⅢSearch to search for devices to be added to the
Block List.
ⅢView Trusted to remove a device from the Trusted
List and add it to the Block List.
4. Highlight a device you want to add to the Block List
and press Block (left softkey).
Block List Options
From the Block List, press Options (right softkey) to
display the following options.
ⅢDevice Info to display the device’s information.
ⅢUnblock to remove the device from the Block List.
ⅢEdit Name to edit the name of the device.
ⅢSort by to sort the devices.
ⅢHelp to display the Block List help.
Bluetooth
124 Section 2K. Bluetooth
Using the Bluetooth Settings Menu
The Bluetooth Settings menu allows you to set up many
of the characteristics of your phone’s Bluetooth service,
including:
ⅷEntering or changing the name your phone uses for
Bluetooth communication.
ⅷSetting your phone’s visibility (or “discoverability”) for
other Bluetooth devices.
ⅷDisplaying your phone’s Bluetooth address.
To access the Bluetooth Settings menu:
1. Press Menu > Settings > Bluetooth.
2. Set your Bluetooth options.
ⅢSelect On/Off to enable or disable Bluetooth.
ⅢSelect Visibility > Always Visible , Visible for 3 min., or
Hidden to set yourBluetooth visibility.
ⅢSelect Device Name to set a Bluetooth name for
your phone.
ⅢSelect Device Info to display yourphone’s
Bluetooth name, address, class, and available
services.
ⅢSelect Trusted List to display a list of trusted
Bluetooth devices.
ⅢSelect Voice Priority to choose the default device
you want to use forincoming and outgoing calls.
ⅢSelect Exchange Folder > In Phone, In microSD, or
Switch w/Card to set the storage area for files
received from other Bluetooth devices.
Bluetooth Profiles
All of the Bluetooth settings you configure are stored in
yourphone’s Bluetooth user profile. You can use
different profiles for specific Bluetooth functions.
ⅷHSP: Headset Profile – This profile functions as a
wireless ear jack. When an incoming call is received,
the ringer can be heard through the headset instead
of through the phone. The call can then be received by
pushing a button. While using the phone, you can use
the headset instead of the phone by pushing a button
on the headset, the same as inserting a jack into the
phone. Increase or decrease the volume by using the
volume key on the side of the phone.
Section 2K. Bluetooth 125
ⅷHFP: Hands-Free Profile – This profile functions as a
wireless car kit. Incoming calls ring to the hands-free
headset or device. Calls can be received by pressing
a button on the headset or device. For dialing, four
functions are supported: recent call dial, voice dial,
speed dial, and number dial. Increase or decrease the
volume by using the volume key on the side of the
handset.
ⅷDUN: Dial-Up Network Profile – This profile functions as a
wireless data cable, connecting a computer orPDA to
a network through yourphone.
ⅷOPP: Object Push Profile – This profile uses the Generic
Object Exchange profile services to send data objects
between devices and can be used to exchange
objects like music files, pictures, calendar (vCal) and
business cards (vCard).
ⅷFTP: File Transfer Profile – This profile allows you to
transferfiles to or from other Bluetooth-enabled
devices.
ⅷBPP: Basic Printing Profile – This profile enables simpler
printing from yourphone to a Bluetooth-enabled
printer.
ⅷA2DP: Advanced Audio Distribution Profile – This profile
allows you to transmit high quality stereo music from
yourphone to other compatible accessories including
Bluetooth stereo headsets.
ⅷAVRCP: Audio/Video Remote Control Profile – This profile
enables yourphone to remotely control compatible
accessories including Bluetooth stereo headsets. You
can play, pause, stop, forward, reverse, fast forward, or
rewind from a headset. (Playback functions may vary
among Bluetooth accessories.)
ⅷPBAP: Phone Book Access Profile –This profile enables
exchange of Contacts information between devices. It
is typically used between a car kit and a mobile phone
to allow the car kit to display the name of the incoming
caller.
Bluetooth
126 Section 2K. Bluetooth
Pairing Bluetooth Devices
Paired Devices
The Bluetooth pairing process allows you to establish
trusted connections between yourphone and another
Bluetooth device. When devices are paired, a passkey is
shared between devices, allowing forfast, secure
connections while bypassing the discovery and
authentication process.
To pair your phone with another Bluetooth device:
1. Press Menu > Tools > Bluetooth > Add to Trusted.
2. Select a device type to search for and press .
Your phone will display a list of any discovered
devices of the type you specified. Select a device
and press .
3. Enter the PIN and press . (When the owner of the
other device enters the same PIN, the pairing is
complete.)
Using the Trusted Devices
Options
Once you have created paired devices, several options
are available from the trusted devices list.
1. From the trusted devices list, select a device.
2. Press Options (right softkey) to display the following
options:
ⅢConnect or Disconnect to connect to or disconnect
from the Bluetooth device (if applicable).
ⅢSend Item to send an item saved on yourphone to
another Bluetooth device (if applicable).
ⅢBrowse to browse and transferfiles between
Bluetooth devices using FTP.
ⅢPrint to print the data using Basic Printing Profile or
Object Push Profile (if applicable).
ⅢEdit Name to edit the name of the trusted device.
ⅢAuto-Accept to configure your phone’s
accessibility to other Bluetooth devices.
ⅢDevice Info to display the trusted device’s
information.
Note Due to different specifications and features of other
Bluetooth-compatible devices, display and
operations may be different, and functions such as
transfer or exchange may not be possible with all
Bluetooth-compatible devices.
Section 2K. Bluetooth 127
ⅢSort by to sort the trusted devices.
ⅢDelete to delete the selected device from the list.
ⅢDelete All to delete all devices from the list.
ⅢSettings to display the Bluetooth settings menu.
(See page 124.)
ⅢHelp to display the assisting information.
Printing Data via Bluetooth
You can print out yourpictures, Contacts entries,
business cards, calendar events, and messages stored
on the phone. (Some Bluetooth-enabled printers may
not support this feature.)
1. Press Menu > Tools > Bluetooth > Trusted List.
2. Select the device from the trusted devices list and
then press Options (right softkey) >Print.
3. Select a category (Picture, Business Card, Contacts,
Calendar Event, or Message)and press .
4. Follow the onscreen instructions to select the
item(s) to print.
5. Select Handset Default, Create Print Job, or
PrinterDefault.
ⅢHandset Default to print items by creating a print job
via the Basic Printing Profile.
ⅢCreate Print Job to print items by creating a print job
via the Basic Printing Profile.
ⅢPrinter Default to print items using the default
printer settings via the Object Push Profile.
6. Make sure the printer is ready to print data, and then
press Print (left softkey).
7. If necessary, enter the PIN and press .
Note Before using the Bluetooth feature, make sure your
phone’s battery is fully charged.
Bluetooth
128 Section 2K. Bluetooth
Sending Data via Bluetooth
You can send data saved on your phone to another
Bluetooth device.
1. Press Menu > Tools > Bluetooth > Trusted List.
2. Select the device from the trusted devices list and
then press Options (right softkey) > Send Item.
3. Select an item (Business Card, Contacts,
Calendar Event, From File Manager, orTo File Manager)
and press .
4. Follow the onscreen instructions to select the
item(s) to send.
5. Make sure the other device is ready to receive data,
and then press Send (left softkey).
6. If necessary, enter the PIN and press .
Section 3
Sprint®Service
130 Section 3A. Sprint Service: The Basics
Section 3A
Sprint Service Features:
The Basics
ࡗUsing Voicemail (page 130)
ࡗUsing SMS Text Messaging (page 136)
ࡗUsing SMS Voice Messaging (page 137)
ࡗUsing Caller ID (page 138)
ࡗResponding to Call Waiting (page 139)
ࡗMaking a Three-Way Call (page 139)
ࡗUsing Call Forwarding (page 140)
Now that you’ve explored your phone’s fundamentals, it’s time
to learn about the calling features that enhance your Sprint
service. This section outlines your basic Sprint service
features.
Using Voicemail
Setting Up Your Voicemail
All unanswered calls to yourphone are automatically
transferred to your voicemail, even if yourphone is in use
or turned off. Therefore, you will want to set up your
Sprint Voicemail and personal greeting as soon as your
phone is activated.
1. Press and hold .
2. Follow the system prompts to:
ⅢCreate yourpasscode.
ⅢRecord yourname announcement.
ⅢRecord yourgreeting.
ⅢChoose whether to activate One-Touch Message
Access (a feature that lets you access messages
simply by pressing and holding , bypassing
the need for you to enter yourpasscode).
Section 3A. Sprint Service: The Basics 131
Voicemail Notification
There are several ways your phone alerts you to a new
message:
ⅷBy displaying a message on the screen.
ⅷBy sounding the assigned ringer type.
ⅷBy the LED blinking.
ⅷBy displaying at the top of your screen.
New Voicemail Message Alerts
When you receive a new voice message, your phone
alerts you and prompts you to call yourvoicemail.
To call your voicemail:
ᮣPress and hold .
To display your Missed Log:
ᮣPress Menu > Messages > Voicemail > Details.
RetrievingYour Voicemail Messages
You can review your messages directly from your
wireless phone or from any other touch-tone phone.
To dial from yourwireless phone, eitherspeed dial your
voicemail oruse the menu keys.
Using One-Touch Message Access
ᮣPress and hold .
(Your phone will dial yourvoicemail box.)
Note When you are roaming off the Sprint National
Network, you may not receive notification of new
voicemail messages. It is recommended that you
periodically check yourvoicemail by dialing 1 +
area code + your wireless phone number. When
your voicemail answers, press (*)and enter your
passcode. You will be charged roaming rates when
accessing voicemail while roaming off the Sprint
National Network.
Your phone accepts messages even when it is
turned off. However, you are notified of new
messages only when your phone is turned on and
you are in a Sprint service area.
Note Voicemail Passcode
If you are concerned about unauthorized access to
your voicemail account, Sprint recommends that
you enable your voicemail passcode (do not
activate One-Touch Message Access).
Sprint Service
132 Section 3A. Sprint Service: The Basics
Using the Menu Keys on Your Phone to Access
Your Messages
1. Press Menu > Messages > Voicemail.
2. Press to listen to yourmessages.
Using Another Phone to Access Messages
1. Dial yourwireless phone number.
2. When your voicemail answers, press the asterisk (*)
key.
3. Enter your passcode.
Voicemail Key Guide
Here’s a quick guide to your keypad functions while
listening to voicemail messages. For further details and
menu options, see “Voicemail Menu Key” on page 135.
Date/Time Send Reply Advance
Replay Rewind Forward
Delete Return Call Save
Cancel Help Skip
Voicemail Options
Your phone offers several options for organizing and
accessing yourvoicemail.
Using Expert Mode
Using the Expert Mode setting for yourpersonal
voicemail box helps you navigate through the voicemail
system more quickly by shortening the voice prompts
you hearat each level.
Tip When you call into voicemail, you first hear the
header information (date, time, and sender
information) for the message. To skip directly to the
message, press 4during the header.
Note You are charged for airtime minutes when you are
accessing your voicemail from your wireless phone.
Section 3A. Sprint Service: The Basics 133
1. Press and hold to access your voicemail. (If
yourvoicemail box contains any new messages,
press to access the main voicemail menu.)
2. Press to change your Personal Options,
following the system prompts.
3. Press for Expert Mode.
4. Press to turn Expert Mode on or off.
Setting Up Group Distribution Lists
Create up to 20 separate group lists, each with up to 20
Sprint voicemail users.
1. Press and hold to access your voicemail. (If
your voicemail box contains any new messages,
press to access the main voicemail menu.)
2. Press to change your Personal Options,
following the system prompts.
3. Press for Settings.
4. Press for Group Distribution Lists.
5. Follow the voice prompts to create, edit, rename, or
delete group lists.
Sprint Callback
Return a call after listening to a message without
disconnecting from voicemail.
ᮣPress after listening to a message. (Once the
call is complete, you’re returned to the voicemail
main menu.)
Voicemail-to-Voicemail Message
Record and send a voice message to otherSprint
Voicemail users.
1. From the main voicemail menu, press to send
a message.
2. Follow the voice prompts to enter the phone
number.
3. Follow the voice prompts to record and send your
voice message.
Voicemail-to-Voicemail Message Reply
Reply to a voice message received from any otherSprint
Voicemail user.
1. After listening to a voice message, press .
2. Follow the voice prompts to record and send your
reply.
Sprint Service
134 Section 3A. Sprint Service: The Basics
Voicemail-to-Voicemail Message Forwarding
Forward a voice message, except those marked
“Private,” to other Sprint Voicemail users.
1. After listening to a message, press .
2. Follow the voice prompts to enter the phone
number.
3. Follow the voice prompts to record yourintroduction
and forward the voice message.
Voicemail-to-Voicemail Receipt Request
Receive confirmation that your voice message has been
listened to when you send, forward messages to, or
reply to messages from other Sprint users.
1. After you have recorded a message, press to
listen to the recorded message.
2. Press for More Options.
3. Press to mark receipt requested.
4. Press to send your voicemail message.
Extended Absence Greeting
When yourphone is turned off oryou are off the Sprint
National Network for an extended period, your phone
can play this greeting instead of your normal personal
greeting.
1. From the main voicemail menu, press for
Personal Options.
2. Press for Greetings.
3. Press to record an Extended Absence
Greeting.
Clearing the Message Icon
Your phone may temporarily continue to display the
message icon after you have checked your voice and
text messages.
1. Press Menu > Messages > Voicemail >
Reset Indicator.
2. Press Yes (left softkey).
Section 3A. Sprint Service: The Basics 135
Voicemail Menu Key
Following the prompts on the voicemail system, you can
use yourkeypad to navigate through the voicemail
menu. The following list outlines the Sprint voicemail
system menu structure.
Listen
Date and Time Information
Send a Reply Message
Advance a Few Seconds
Replay
Rewind a Few Seconds
Forward Message
Erase
Return This Call
Save
Options
Skip to the Next Message
Send a Message
Personal Options
Settings
Skip Passcode
Autoplay
Play Back Date, Time, and Caller Info.
Change Passcode
Group Distribution Lists
Numeric Paging
Return to Personal Options Menu
Greetings
Personal Greetings
Name Announcement
Extended Absence Greeting
Return to Personal Options Menu
Expert Mode
Place a Call
Exit
Sprint Service
136 Section 3A. Sprint Service: The Basics
Using SMS Text Messaging
With SMS Text Messaging, you can send and receive
instant text messages between your wireless phone and
another messaging-ready phone. When you receive a
new message, it will automatically display on your
phone’s screen.
In addition, SMS Text Messaging includes a variety of
preset messages, such as “The meeting has been
cancelled,”that make composing messages fast and
easy. Use your phone to customize yourown preset
messages (up to 50 characters).
Composing SMS Text Messages
1. Press Menu >Messages > Send Message >
Text Message.
2. Select the entry method you prefer:
ⅢGo to Contacts to select a recipient from your
Contacts. (Qualifying Contacts entries must
contain a wireless phone number or an email
address.)
ⅢMultiple (left softkey) to select multiple recipients.
ⅢNew Addr. (right softkey) to enter a recipient’s
wireless phone number oremail address directly.
3. Press Continue (left softkey) when you have finished
entering recipients. (You may include up to 25
recipients per message.)
4. Compose a message.
ⅢPress Text Mode (right softkey) to change a text
input mode.
5. Press Options (right softkey) to select additional
options.
6. Review your message and press Send (left softkey).
Accessing SMS Text Messages
To read an SMS Text message:
ᮣWhen you receive a text message, it will be
displayed automatically on your phone’s screen.
Use your navigation key to scroll down and view the
entire message.
Tip You can also send an SMS Voice message when
the left softkey displays the Send Msg option.
Section 3A. Sprint Service: The Basics 137
To reply to an SMS Text message:
1.
While the message is open, press
Reply
(left softkey)
.
–or–
Highlight the message in the Inbox, and press
Options (right softkey) > Reply With > Text Message.
2. Follow the steps 3-5 of “Composing SMS Text
Messages” on the previous page.
Using Preset Messages
Preset messages make sending text messages to your
friends, family, and co-workers easierthan ever.
1. Press Menu > Settings > Messages > Preset Msgs.
2. Highlight a message you wish to send and press
Options (right softkey) >Send Text.
3. Follow steps 2-5 in “Composing SMS Text
Messages” on the previous page.
Using SMS Voice Messaging
In addition to SMS Text Messaging, your phone is
enabled with SMS Voice Messaging. With SMS Voice
Messaging, you can send a voice message to other
SMS-enabled phones or to working email addresses
without making a phone call. Just record a message
and send it directly to the recipient’s phone messaging
inbox.
Playing an SMS Voice Message
1. Press Menu > Messages > VoiceSMS.
2. Select a message and press to play. (To display
the message options, press Options [right softkey].)
Composing SMS Voice Messages
1. Press Menu > Messages > Send Message > VoiceSMS
and select the entry method you prefer:
ⅢGo to Contacts to select a recipient from your
Contacts. (Qualifying Contacts entries must
contain a wireless phone number oran email
address.)
ⅢMultiple (left softkey) to select multiple recipients.
Tip If you have two ormore notifications, the Missed
Alert list will appear. Select a message in the list and
press View (left softkey) to view the message.
Sprint Service
138 Section 3A. Sprint Service: The Basics
ⅢNew Addr. (right softkey) to enter a recipient’s
wireless phone number oremail address directly.
2. Start recording after the beep. (You can record up to
two minutes.)
3. To finish recording press Done (left softkey).
4. Press Send (left softkey) to send the voice message.
Accessing SMS Voice Messages
ᮣWhen you receive a voice message, a pop-up
notification will automatically be displayed on your
phone’s screen. Use your softkeys to access and
play the voice message.
To reply to an SMS Voice message:
1. From the SMS Voice inbox, press Reply (left softkey).
2. Record your reply, and then press Send (left softkey).
Using CallerID
Caller ID allows people to identify a caller before
answering the phone by displaying the number of the
incoming call. If you do not want your number displayed
when you make a call, follow these steps.
1. Press .
2. Enter the numberyou want to call.
3. Press .
To permanently block yournumber, call Sprint Customer
Service
.
Tip You can also send an SMS Voice message when
the left softkey displays the Send Msg option.
Section 3A. Sprint Service: The Basics 139
Responding to Call Waiting
When you’re on a call, Call Waiting alerts you to
incoming calls by sounding one beep. Your phone’s
screen informs you that anothercall is coming in and
displays the caller’s phone number (if it is available).
To respond to an incoming call while you’re on a call:
ᮣPress . (This puts the first caller on hold and
answers the second call.)
To switch back to the first caller:
ᮣPress again.
Making a Three-Way Call
With Three-Way Calling, you can talk to two people at
the same time. When using this feature, the normal
airtime rates will be charged for each of the two calls.
1. Enter a numberyou wish to call and press .
2. Once you have established the connection, press
. (This puts the first caller on hold.)
3. Select Contacts, Recent History, or EnterPhone#.
4. Select a number from yourContacts or Recent
History, or enter it directly, and then press .
5. When you’re connected to the second party, press
or Join (right softkey) again to begin your three-
way call.
If one of the people you called hangs up during your
call, you and the remaining caller stay connected. If you
initiated the call and are the first to hang up, all callers
are disconnected.
Tip For those calls where you don’t want to be
interrupted, you can temporarily disable Call
Waiting by pressing *7 0 before placing your call.
Call Waiting is automatically reactivated once you
end the call.
Sprint Service
140 Section 3A. Sprint Service: The Basics
Using Call Forwarding
Call Forwarding lets you forward all yourincoming calls
to another phone number – even when your phone is
turned off. You can continue to make calls from your
phone when Call Forwarding is activated.
To activate Call Forwarding:
1. Press .
2. Enter the area code and phone number to which
yourfuture calls should be forwarded.
3. Press . (You will hear a tone to confirm the
activation of Call Forwarding.)
To deactivate Call Forwarding:
1. Press .
2. Press . (You will hear a tone to confirm the
deactivation.)
Note You are charged a higher rate forcalls you have
forwarded.
Section 3B: Sprint PowerVision 141
Section 3B
Sprint Power Vision
ࡗSprint Power Vision Applications (page 141)
ࡗGetting Started With Sprint Power Vision (page 142)
ࡗAccessing Messaging (page 146)
ࡗDownloading Content (page 149)
ࡗExploring the Web (page 151)
ࡗPhone as Modem (page 154)
ࡗSprint Power Vision FAQs (page 156)
Sprint Power Vision offers easy and amazing data services
you will really use. These features – including messaging,
games, downloadable ringers and screen savers, and
portable Web access – let you have fun, stay in touch,
and stay informed no matter where you go on the Sprint
National Network.
Sprint Power Vision Applications
Here is a brief list of the applications available through
yourphone. For more information, please visit us online
at www.sprint.com.
Sprint Picture Mail – Instantly shoot, share, and print sharp
digital pictures, and take and send short video clips with
yourphone.
Messaging – Send and receive email messages and
instant messages and participate in online chat
discussions on yourwireless phone.
Games – Play exciting games with full-colorgraphics,
sound, and vibration. Choose from hundreds of games
to play anytime.
Ringers – Personalize your phone by downloading and
assigning different ringers to numbers in your Contacts.
Screen Savers –
Download unique images to use as
screen savers, or make it easy to tell who’s calling by
assigning specific images to numbers in your Contacts.
Web – Experience full-color graphic versions of popular
Web sites from your phone.
Phone as Modem –Use your phone as a high-speed
Internet connection for your laptop computer.
Sprint PowerVision
142 Section 3B: Sprint PowerVision
Getting Started With
Sprint Power Vision
With yourSprint service, you are ready to start enjoying
the advantages of Sprint PowerVision. This section will
help you learn the basics of using your Sprint Power
Vision services, including managing youruser name,
launching a data connection, and navigating the Web
with yourphone.
Your User Name
When you buy your phone and sign up for service, you’re
automatically assigned a user name, which is typically
based on yourname and a number, followed by
“@sprintpcs.com.”(Forexample, the third John Smith to
sign up for Sprint Power Vision services might have
jsmith003@sprint.com as his user name.)
When you use Sprint PowerVision services, your user
name is submitted to identify you to the Sprint National
Network. The user name is also useful as an address for
Sprint Mail, as a way to personalize Web services, and
as an online virtual identity.
Your user name will be automatically programmed into
yourphone. You don’t have to enter it.
Finding Your User Name
If you aren’t sure what your username is, you can easily
find it online or on your phone.
ⅷAt www.sprint.com.Sign on to your account using your
phone number and password. To display your user
name, click on the My Personal Information menu, then
click on Power Vision Username.
ⅷOn yourphone. You can find your username under the
Phone Info option in your phone’s Settings menu
(Menu > Settings > Phone Info > Phone#/User ID).
Updating Your User Name
If you choose to change your user name and select a
new one online, you must then update the username on
your phone.
ᮣPress Menu > Settings > More... >Data > Update Profile.
(To cancel, press before completing the update.)
Section 3B: Sprint PowerVision 143
Launching a Sprint Power Vision
Connection
To launch a Sprint Power Vision connection:
ᮣPress Menu > Web. (Your Sprint Power Vision
connection will start and the Sprint PowerVision
home page will be displayed.)
The Sprint Power Vision Home Page
While connecting, an animation may be displayed.
Net Guard
When you first connect to the Web, the Net Guard will be
displayed to confirm that you want to connect. This
feature helps you avoid accidental connections. You can
disable the Net Guard in the future by selecting
Always Auto-Connect when the Net Guard is displayed.
To change your Net Guard settings:
ᮣPress Menu > Settings > More... > Data > Net Guard.
ⅢSelect On to activate the Net Guard.
ⅢSelect Off to deactivate the Net Guard.
Note
When enabled, the Net Guard appears only once as
long as you have not turned the phone off and on.
Tip To change the default launch page to the last
page you viewed, press Menu (right softkey) >
More... > Preferences > Launch Page and select
Last Page.
Note If Net Guard is enabled and displayed, press OK
(left softkey) to continue and launch the Web.
Sprint PowerVision
144 Section 3B: Sprint PowerVision
Data Connection Status and Indicators
Your phone displays the current status of yourData
connection through indicators at the top of the screen.
The following symbols are used:
Your phone is connected to the high-speed Sprint
Mobile Broadband Network (EVDO). When the
triangles are black, data is being transferred (for
example, when you are opening a Web page);
when the triangles are gray, you are connected to
the network but data is not currently being
transferred (for example, when you are viewing a
Web page that is completely open). In either state,
you can receive incoming calls.
Your phone is on and is connected to the Sprint
1xRTT data network. When the arrows are white,
data is being transferred (for example, when you
are opening a Web page) and you cannot receive
calls.
When the arrows are gray, you are connected
to the network but data is not currently being
transferred (for example, when you are viewing a
Web page that is completely open), and you can
receive calls.
If no indicator is displayed, yourphone does not have a
current data connection. To launch a connection, see
“Launching a Sprint Power Vision Connection” on
page 143.
Navigating the Web
Navigating through menus and Web sites during a
Sprint PowerVision session is easy once you’ve learned
a few basics. Here are some tips for getting around:
Softkeys
During a Sprint PowerVision session, the bottom line of
yourphone’s display contains one or more softkeys.
These keys are shortcut controls for navigating around
the Web, and they correspond to the softkeys directly
below the phone’s display screen.
Tip Depending on which Web sites you visit, the labels
on the softkeys may change to indicate their
function.
Section 3B: Sprint PowerVision 145
To use softkeys:
ᮣ
Press a softkey. (If an additional pop-up menu is
displayed when you press the softkey, select menu
items using your keypad [if they’re numbered],
or by
highlighting the option and pressing .)
Scrolling
As with other parts of your phone’s menu, you’ll have to
scroll up and down to see everything on some Web sites.
To scroll line by line through Web sites:
ᮣPress the navigation key up and down.
To scroll page by page through Web sites:
ᮣPress the volume buttons on the side of the phone.
Selecting
Once you’ve learned how to use softkeys and scroll, you
can start navigating the Web.
To select onscreen items:
ᮣ
Use the
navigation
key to highlight an item, and then
press the left softkey (or press
)
.
Links, which are displayed as underlined text, allow you
to jump to Web pages, select special functions, oreven
place phone calls.
To select links:
ᮣHighlight the link and press the appropriate softkey.
Going Back
To go back one page:
ᮣPress the key on your phone.
Going Home
To return to the home page from any other page:
ᮣPress and hold .
–or –
Press the Menu icon (right softkey) > Home .
Note The BACK key is also used for deleting text (like a
BACKSPACE key) when you are entering text.
Tip You’ll find that the left softkey is used primarily for
selecting items. This softkey is often labeled “OK.”
If the items on a page are numbered, you can use
your keypad (number keys) to select an item.
Sprint PowerVision
146 Section 3B: Sprint PowerVision
Accessing Messaging
You can send and receive email messages, instant
messages, and text messages and participate in Web-
based chat rooms right from yourphone. Messaging
allows you to stay connected 24 hours a day anywhere
on the Sprint National Network.
Message Types
There are many types of text messaging available on
your phone. These include SMS Text Messaging, Sprint
Instant Messaging, Email, and Chat.
(Sprint Voicemail provides voicemail-to-mailbox
messaging. Forinformation on using your phone’s
voicemail feature, see “Using Voicemail”on page 130.)
Using Sprint Mail
Sprint Mail allows you to perform many of the typical
email functions from your phone that you can from your
personal computer. You can manage yourSprint Mail
account from yourphone or online at www.sprint.com.
To access Sprint Mail from your phone:
1. Press Menu > Web.
2. From the Sprint Power Vision home page, select
Messaging > Email > PCS Mail.
3. If you’re a first-time user, yourphone will prompt you
to set up yourSprint Mail account by establishing a
user name and password.
4. Select the folder you wish to view, such as Inbox or
Compose .
Sending Sprint Mail
1. From the Sprint Mail page (see above), select
Compose (or Reply or Reply All if you’re viewing a
message).
2. Enter a recipient or recipients for youremail:
ⅢSelect To and pres
s
to display your Sprint Mail
address book. To add a recipient, select it and
pres
s
.
–or–
ⅢSelect the addressee box (underor adjacent to To)
and enter an email address.
Section 3B: Sprint PowerVision 147
3. Repeat as necessary for CCs and BCCs.
4. Enter the Subject and your Message. (Select each
field and pres
s to enter text.)
5. Press Send (left softkey) to send your Sprint Mail
message.
Forinformation and instructions about reading, replying
to, and managing Sprint Mail (including setting up your
address book), please visit www.sprint.com.
Accessing Additional Email Providers
With Sprint Power Vision, you can use popular email
services such as AOL®Mail, AIM®Mail, MSN®Mail,
Gmail, and Yahoo!®Mail to keep in touch, even while
you’re on the go.
1. From the Sprint PowerVision home page, select
Messaging > Email.
2. Select an email provider, such as AOLMail, AIM Mail,
MSN Hotmail, Gmail, orYahoo! Email.
3. Use yourkeypad to enter the required sign-in
information for the selected provider, such as user
name, email address, or password, and select
Sign In. (Your mailbox for the selected providerwill
be displayed.)
4. Follow the onscreen instructions to read, reply to,
compose, send, and manage youremail account.
Tip You can also access the Email and Instant
Messaging options from the main menu. Press
Menu >Messages >Email or IM and select an
option.
Note The information required to sign in will vary
depending on the email provider you are
accessing.
Sprint PowerVision
148 Section 3B: Sprint PowerVision
Accessing Sprint Instant Messaging
Sprint PowerVision also provides you with access to
popular instant messaging (IM) clients, including AOL®
Instant MessengerTM, MSN®Messenger, and Yahoo!®
Messenger.
1. From the Sprint PowerVision home page, select
Messaging > IM.
2. Select an IM provider, such as AOLInstant
Messenger,MSN Messenger, or Yahoo! Messenger.
3. Use your keypad to enter the required sign-in
information for the selected provider, such as user
name or password, and select Sign In. (Your IM
screen for the selected provider will be displayed.)
4. Follow the onscreen instructions to read, reply to,
compose, send, and manage yourIM account.
Accessing Wireless Chatrooms
Sprint PowerVision gives you the ability to join wireless
chatrooms from yourphone.
1. From the Sprint PowerVision home page, select
Messaging > Chat & Dating.
2. Select a chat providerand follow the onscreen
instructions to sign up and begin chatting.
Note Chat & Dating options change frequently, so check
back often to see what’s new.
Note The information required to sign in will vary
depending on the instant messaging provider you
are accessing.
Section 3B: Sprint PowerVision 149
Downloading Content
With Sprint PowerVision, you have access to a dynamic
variety of Premium Services content, such as
downloadable Games, Ringers, Screen Savers, and
other applications. (Additional charges may apply.)The
basic steps required to access and download Premium
Services content are outlined below.
Accessing the Download Menus
1. Press Menu > Get Stuff.
2. Select the item you wish to download from the
corresponding category (Games, Ringers,
Screen Savers, etc.).
To access the download menus from the Web browser:
1. From the Sprint PowerVision home page, select
Downloads.
2. Select Games, Ringers, Screen Savers,Applications,
IM & Email, or Call Tones to go to the corresponding
download menu. (Formore information on
navigating the Web, see “Navigating the Web”on
page 144.)
Selecting an Item to Download
You can search for available items to download in a
number of ways:
ⅷFeatured displays a rotating selection of featured items.
ⅷCategories allows you to narrow your search to a
general category, such as Country or Pop/Rock for
Ringers or For the Ladies for Screen Savers. (There
may be several pages of available content in a list.
Select Next 9 to view additional items.)
ⅷSearch allows you to use your keypad to entersearch
criteria to locate an item. You may enter an entire word
or title orperform a partial-word search.
Sprint PowerVision
150 Section 3B: Sprint PowerVision
Downloading an Item
Once you’ve selected an item you wish to download,
highlight it and press , or press OK (left softkey). You
will see a summary page for the item including its title,
the vendor, the download details, the file size, and the
cost. Links allow you to view the License Details page,
which outlines the price, license type, and length of
license for the download, and the Terms of Use page,
which details the Premium Services Terms of Use and
yourresponsibility forpayment.
To download a selected item:
1. From the information page, select Buy. (The item will
download automatically. When the New Download
screen is displayed, the item has been successfully
downloaded to yourphone.)
2. Once the item has been successfully downloaded
and the completed screen appears, select an
option to assign the ringer or screen saver, run the
application, play the game, etc.
Using My Content Manager
Whether you purchase yourPremium Services content
from yourphone or from your online account
management page at www.sprint.com, all of your
purchases are stored in My Content Manager and may be
downloaded to yourphone from there.
My Content Manager is a storage area on the Sprint
National Network that allows you to store all yourPremium
Services downloadable files. The files remain in My
Content Manageruntil their license terms have expired –
even after you have downloaded the content to your
phone. This provides you with a convenient place to
access information about yourdownloaded files without
having to store the information in yourphone’s memory.
To access My Content Manager:
ᮣFrom the Sprint PowerVision home page, select
Downloads > My Content Manager.
(A list of your purchased items will be displayed.)
Note If you have not previously purchased an item, you
will be prompted to create your purchasing profile.
Section 3B: Sprint PowerVision 151
To download purchased content from My Content
Manager:
1. From the My Content Manager display (see the
previous page), highlight the item you wish to
download, and press . (The information page for
the selected item will be displayed.)
2. Select Download and press . (The item will
download automatically. When the New Download
screen is displayed, the item has been successfully
downloaded to yourphone.)
3. Once the item has been successfully downloaded
and the completed screen appears, select an
option to assign the ringer orscreen saver, run the
application, play the game, etc.
For complete information and instructions on
downloading Games, Ringers, Screen Savers,
Applications, IM & Email, and Call Tones, visit the Digital
Lounge at www.sprint.com.
Exploring the Web
With Web access on your phone, you can browse full-
color graphic versions of yourfavorite Web sites, making
it easier than ever to stay informed while on the go.
Follow sports scores, breaking news, and weather, and
shop on yourphone anywhere on the Sprint National
Network.
In addition to the features already covered in this section,
the Sprint PowerVision home page offers access to
these colorful, graphically rich Web categories,
including News, Weather, Entertainment, Sports, Money,
Travel, Shopping, and Tools, as well as useful
management options including My Account and Search.
Many sites are available under more than one menu –
choose the one that’s most convenient for you.
Using the Browser Menu
Navigating the Web from your phone using the Sprint
PowerVision home page is easy once you get the hang
of it. Fordetails on how to navigate the Web, select menu
items, and more, see “Navigating the Web”on page 144.
Tip You can also access My Content Manager through
the phone’s main menu. Press Menu > MyStuff >
[Games,Ringers,Screen Savers,Applications or
IM & Email] > My Content Manager. The browser will
open and take you to the corresponding content.
Sprint PowerVision
152 Section 3B: Sprint PowerVision
Although the Sprint PowerVision home page offers a
broad and convenient array of sites and services for you
to browse, not all sites are represented, and certain
functions, such as going directly to specific Web sites,
are not available. Forthese and other functions, you will
need to use the browser menu. The browser menu offers
additional options to expand your use of the Web on
your phone.
Opening the Browser Menu
The browser menu may be opened anytime you have
an active Sprint PowerVision session, from any page
you are viewing.
To open the browser menu:
ᮣPress the right softkey from any page during an
active Sprint PowerVision session. (The browser
menu will be displayed.)
Options available under the browser menu include:
ⅷHome. Returns the browser to the Sprint PowerVision
home page.
ⅷForward. Returns you to a previously viewed page
(after having used the ).
ⅷMark this page. Allows you to bookmark the current site.
ⅷView Bookmarks. Allows you to access and manage
your bookmarks.
ⅷSearch. Launches a Web search.
ⅷSend page. Allows you to send a URL via SMS.
ⅷGo to URL.... Allows you to navigate directly to a Web
site by entering its URL(Web site address).
ⅷHistory. Keeps a list of links to yourmost recently
visited sites. To navigate to a site, highlight it and press
, and then select Connect.
ⅷRefresh this page. Reloads the current Web page.
ⅷMore.... Displays additional options:
ⅢShow URL. Displays the URL(Web site address) of
the site you’re currently viewing.
ⅢRestart Browser. Refreshes the current browser
session.
ⅢError Log. Lets you display the error log.
ⅢAbout Browser.Allows you to display information
about your browser.
ⅢPreferences. Lets you configure and manage your
browser settings.
Section 3B: Sprint PowerVision 153
Creating a Bookmark
Bookmarks allow you to store the address of your
favorite Web sites for easy access at a latertime.
1. Go to the Web page you want to mark.
2. Press the right softkey to open the browser menu.
3. Select Mark this page > Save (left softkey) >OK(left
softkey).
Accessing a Bookmark
1. Press the right softkey to open the browser menu.
2. Select View Bookmarks.
3. Select a bookmark and press (or press the
number corresponding to the bookmark you wish
to access).
Deleting a Bookmark
1. Press the right softkey to open the browser menu.
2. Select View Bookmarks.
3. Select a bookmark and press the right softkey.
4. Select Delete. (A confirmation will be displayed.)
5. Press Yes (right softkey) to remove the bookmark.
Going to a Specific Web site
To go to a particularWeb site by entering a URL(Web site
address):
1. Press the right softkey to open the browser menu.
2. Select Go to URL...
3. Select the Input Address and press .
4. Use yourkeypad to enter the URLof the Web site
you wish to go to and press .
5. Press again to go to the Web site.
Note Not all Web sites are viewable on your phone.
Note Bookmarking a page does not store the page
contents, just its address.
Some pages cannot be bookmarked. Whether a
particular Web page may be marked is controlled
by its creator.
Sprint PowerVision
154 Section 3B: Sprint PowerVision
Reloading a Web Page
To reload (refresh) a Web page:
1. Press the right softkey to open the browser menu.
2. Select Refresh this page. (The browser will reload the
current Web page.)
Restarting the Web Browser
If the Web browser seems to be malfunctioning or stops
responding, you can usually fix the problem by simply
restarting the browser.
1. Press the right softkey to open the browser menu.
2. Select More... > Restart Browser.
Phone as Modem
Your phone’s data capabilities enable you to use its
high-speed data connection as a modem for your
laptop computer. You’ll be able to send and receive
email, browse the Internet, and access yourcompany’s
network anywhere on the Sprint National Network.
Note To use this service, you are required to sign up on a
Sprint Power Vision with Phone as Modem plan. Go
to www.sprint.com orvisit a Sprint Store for Phone
as Modem plan details and more information.
Section 3B: Sprint PowerVision 155
Setting Up a Data Connection With Your
Computer
In order to use your phone as a modem, you’ll first need
to load the Sprint PCS Connection ManagerSM software
on yourcomputer. Then, use a compatible USB cable or
built-in Bluetooth connection to connect yourphone to
your computer.
1. From yourcomputer’s traditional Internet
connection, go to www.sprint.com/downloads and
download the Sprint PCS Connection Manager for
Phone as Modem/USB Cables software. (The software
and drivers can be downloaded free of charge.)
2. Double-click the downloaded file and follow the
onscreen instructions to install the Sprint PCS
Connection Manager software and drivers to your
computer.
3. Once the software has been fully installed, connect
yourphone to your computer using a USB cable or
built-in Bluetooth connection. (Your computer will
detect the connection and a status icon may
appear in your system tray.)
4. Launch the Sprint PCS Connection Manager
software, select a profile, and click Connect.
5. Once the connection is established, launch an
Internet session, check youremail, or do anything
else you would do using a traditional data
connection.
6. When you’re ready to terminate the data
connection, double-click the Sprint PCS
Connection Manager icon in the system tray, and
then click Disconnect to end the session.
Note While your data connection is active, you will not be
able to receive incoming calls; all incoming calls will
be forwarded to your Sprint Voicemail. Placing an
outgoing call during a data session terminates the
data connection.
Sprint Vision services are available on the Sprint
National Network. Sprint Power Vision services
work anywhere on the Sprint National Network, but
broadband-like download speeds are only available
in areas covered by the Sprint Mobile Broadband
Network.
Sprint PowerVision
156 Section 3B: Sprint PowerVision
Sprint Power Vision FAQs
How will I know when my phone is ready for Sprint Power
Vision
service?
Your user name (for example, bsmith01@sprint.com) will
be displayed when you access Menu > Settings >
Phone Info > My Account.
How do I sign in for the first time?
You are automatically signed in to access Sprint Power
Vision services when you turn on your phone.
How do I know when my phone is connected to Sprint Power
Vision services?
Your phone automatically connects when Sprint Power
Vision service is used or an incoming message arrives.
Your phone will also display the or indicator.
Can I make calls and use Sprint Power Vision services at the
same time?
You cannot use voice and Sprint Power Vision services
simultaneously. If you receive a call while Sprint Power
Vision service is active, the call will be forwarded to
voicemail. You can place an outgoing call anytime, but it
will interrupt any in-progress Sprint Power Vision
session.
When is my data connection active?
Your connection is active when data is being transferred.
Outgoing calls are allowed; incoming calls go directly to
voicemail. When active, the or indicator flashes
on yourphone’s display screen.
When is my data connection dormant?
If no data is received for10 seconds, the connection
goes dormant. When the connection is dormant, voice
calls are allowed. (The connection may become active
again quickly.) If no data is received foran extended
period of time, the connection will terminate.
Section 3B: Sprint PowerVision 157
Can I sign out of data services?
You can sign out without turning off your phone;
however, you will not be able to browse the Web oruse
other Sprint Power Vision services. While signed out, you
can still place or receive phone calls, check voicemail,
and use other voice services. You may sign in again at
any time. To sign out, go to Settings > More... > Data >
Disable Data in yourphone’s menu.
Sprint PowerVision
158 Section 3C. Entertainment: Sprint TVand Sprint Music
Section 3C
Entertainment: Sprint TV
and Sprint Music
ࡗSprint TV (page 158)
ࡗThe Sprint Music Store (page 162)
ࡗSprint Music Manager (page 165)
ࡗStreaming Music (page 167)
Sprint TV gives you the ability to listen to audio clips and
to view video clips right from yourphone’s display.
Watch live TV and catch up on episodes of your favorite
shows – anywhere on the Sprint National Network.
Sprint Music lets you preview, purchase, download,
and listen to over a million songs right on your
phone. You can even add songs from yourown
library to round out your on-the-go playlist.
Sprint TV
Your Sprint TV Channel Options
The Sprint TV application offers a wide variety of
accessible channels. Subscription options include
comprehensive basic packages as well as a full menu
of “a la carte” channels. Visit www.sprint.com for more
information on channels and pricing.
Some of the available categories may include:
ⅷSprint Radio ⅷSprint PowerView
ⅷPrimetime TV ⅷMusic Videos
ⅷSprint TVLive ⅷMusic & Radio
ⅷSports ⅷEntertainment
ⅷCartoons ⅷNews & Weather
ⅷMovies & Shorts ⅷMobile Previews
Note Available categories and content are subject to
change.
Section 3C. Entertainment: Sprint TVand Sprint Music 159
Playing a Video or Audio Clip
1. Press Menu > Entertainment.
2. Select Music, TV, or Games to display channel
options.
3. Use yournavigation key and press to select a
channel from the Sprint TV listings or to select an
available category.
4. If applicable, select a clip and press to view the
program. The clip will automatically load and begin
playing.
Tip While you are playing a clip, you can press the
navigation key up and down to surf to a different
channel. A small pop-up screen will be displayed
that tells you which channel you are watching as
well as other channels that you have access to. Use
the navigation key to scroll through the channels.
Once you find a channel that you want to watch or
listen to, scroll to it and press OK (or simply wait
approximately three seconds), and the channel will
begin loading.
Note The first time you access a channel, you will be
prompted to purchase access (unless the channel
doesn’t have a monthly fee). Select Subscribe to
purchase access, or select Preview to view a
preview of the selected channel.
Sprint TV / Sprint Music
160 Section 3C. Entertainment: Sprint TVand Sprint Music
Playing Music Applications Using the
External Control Keys
The external control keys can be used to play, pause,
stop, forward, or rewind a music application.
KeyOperation While Playing Music Applications
Key Operation
Plays orpauses a music application.
Skips to the next music application.
Fast forwards the current music application when
held down.
Returns to the previous music application.
Rewinds the current music application when
held down.
Sprint TV FAQs
1. Will I know if I’m receiving an incoming call while I’m
viewing or listening to a media clip?
No. All incoming calls will roll into voicemail while
you are playing a clip. If the caller leaves a
voicemail, the voicemail icon will be displayed on
the screen.
2. How long are the clips? Will I know the estimated time it
will take to play the clip prior to accessing it?
Once you have selected a channel, you will see a
listing of the available clips, with each clip’s length
displayed after the clip’s title. In general, a clip’s
duration will depend on the story orcontent being
provided, and can be fairly short oras long as a few
minutes.
3. Can I access a clip wherever I am, as long as I have my
phone?
As long as you are on the Sprint National Network,
you will have access to the audio and video clips.
Note Sprint TVService does not work while roaming off
of the Sprint National Network or where service is
unavailable.
Rewind/Previous Fast Forward/Next
Play/Pause
Section 3C. Entertainment: Sprint TVand Sprint Music 161
4. Are the videos that I’m viewing “live” videos?
It depends on the content provider. Some of the
channels available through Sprint TV stream live
content.
5. After purchasing access to an Available Channel for a
monthly fee, do I receive any confirmation? That is, how
do I know it has been purchased?
The next time you access the channel, you bypass
the Preview/Purchase page and go directly to the
available content.
6. If I don’t subscribe to a Sprint Power Vision Plan, will I still
be able to view the multimedia clips?
Yes. For service access charges, please consult
yourSprint service plan or visit www.sprint.com.
7. What does it mean when the video pauses and I see the
word “loading”at the bottom of the screen?
This happens when the phone is loading the data
necessary to play the clip. It typically occurs when
there is heavy traffic on the network.
8. How can I cancel service if I decide I don’t want it?
To cancel yourSprint TVservice, visit
www.sprint.com and sign on to My Sprint Wireless with
your account numberand password. From this
page, you have the ability to cancel the service or
any channels to which you subscribe.
9. If I put on my stereo headset and insert it into the phone’s
headset jack, can I close the phone while I am playing an
audio (or video) clip without interrupting the clip?
Yes. When you insert your stereo headset into the
phone’s headset jack, the phone automatically
goes into “headset mode,”allowing you to close the
phone and continue playing the clip. (Likewise, if
yourphone is in “headset mode,”a phone call will
not disconnect when you close the phone.)
10. Can I surf to a different channel while I am playing a clip?
Yes. While you are playing a clip, you can use the up
and down navigation keys to surf to a different
channel. A small pop-up screen will be displayed
that tells you which channel you are watching as
well as other channels that you have access to. Use
the navigation keys to scroll through the different
channels. Once you find a channel that you want to
watch, scroll to it and press (or simply wait
approximately three seconds), and the channel will
begin loading.
Sprint TV / Sprint Music
162 Section 3C. Entertainment: Sprint TVand Sprint Music
The Sprint Music Store
The Sprint Music Store enables you to purchase and
download digital music files to play on your phone or
computer.
Accessing the Sprint Music Store
You can access the Sprint Music Store right from your
phone’s main menu, anywhere on the Sprint National
Network. When you enterthe store forthe first time, you
will be prompted to set up youruser identification and
password.
1. Press Menu > Get Stuff.
2. Follow the onscreen instructions to establish your
User ID and password.
3. After you have entered your password, highlight
Create New Account and press .
4. Use yourkeypad and navigation key to explore the
store.
Purchasing and Downloading Music
Now that you’re in the store, you can shop forsongs to
purchase and download to yourphone’s microSD card.
1. From the Sprint Music Store opening page, select
an option to browse the store:
ⅢFeatured Music offers a revolving selection of
highlighted songs and artists.
ⅢCategories allows you to choose from categories
such as Top 10s, New This Week, What’s Hot,
Songs You Know, and specific musical genres.
ⅢSearch gives you the option of searching for
specific songs or artists. Just use your keypad to
enter your search criteria in the available field.
2. Select a song and press . (The song information
screen will be displayed.)
3. Select an option and press :
ⅢPreview to play an audio clip of the selected song.
ⅢBuy Song to purchase the song and download it to
yourphone’s microSD card.
Tip Your User ID for the Sprint Music Store is your10-
digit wireless phone number. The password may be
any 4-digit number.
Section 3C. Entertainment: Sprint TVand Sprint Music 163
●When you select Buy Song, the file will
download to yourphone’s microSD card.
(If there is no microSD card installed or if there
is not enough free memory space on the card,
you will see an alert.)
●Once the song has been downloaded to your
microSD card, you will see options allowing
you to listen to the song, add it to a playlist, or
continue shopping.
Playing Music From the Sprint Music
Store
The Sprint Music Store not only gives you access to
great music, it also gives you a place to listen to and
organize your music library.
Accessing the Music Player
1. From the Sprint Music Store opening page, use
yourright navigation key to select the Player tab.
2. From the Player display, select an option:
ⅢAll My Music to browse through all of your
downloaded music, including music purchased
from the Sprint Music Store and any additional
songs you have loaded onto your microSD card
from yourcomputer.
Ⅲ<playlist> to select a customized playlist you’ve
created to organize your music.
ⅢCreate Playlist... to set up a custom playlist of songs
you like to hear together. Follow the onscreen
instructions to create a name for the playlist, select
songs by artist, genre, and title, and create an
order forthe playlist.
3. Once you’ve displayed a list of songs, you can
browse through youravailable titles by Song, Artist,
or Genre to select a specific song.
ⅢTo play a song, select it and press .
ⅢTo listen to a playlist, select it and press to
open the playlist, and then press again to
begin playing from the selected song. (You can
also highlight the playlist and use the softkey
menu to begin listening.)
Sprint TV / Sprint Music
164 Section 3C. Entertainment: Sprint TVand Sprint Music
Backing Up Your Downloaded Music Files
When you purchase and download a music file
from the Sprint Music Store, you get two versions of
the song: one to download and play on your phone
(file type: AAC+), and another to download from
http://musicstore.sprint.com and play on your computer
(file type: WMA). The AAC+ files downloaded to your
phone can only be played on your phone and on your
account, and once they have been downloaded, they
cannot be downloaded again without being
repurchased.
Sprint recommends you back up yourAAC+ music files
to yourcomputer so you can access the files in case
yourmicroSD card is lost or damaged, or if you install a
new microSD card.
1. Connect yourphone using the included USB cable
(page 102) orBluetooth (page 128).
2. Use yourcomputer to navigate to the microSD
card’s Get Stuff folder.
3. Select and copy the music files to a folderon your
computer’s hard drive.
Receiving an Incoming Call While Playing Music
An incoming call causes the currently played music file
to be paused while the phone call is active. Once the
current call is ended, you can select to resume any
paused applications (music will resume playing
automatically).
1. Answer an incoming call by pressing .
2. When you are done with your call, press to end
the call. The previously paused application then
resumes.
Note When placing an outgoing call, the Application
Manager pauses your current music playback and
allows you to proceed with your outgoing call.
When the call is ended, the Application Manger
restarts the music playback.
Note Although you can store AAC+ files on your
computer, they will only be playable on your phone
and on your account.
If you copy the files to a new microSD card, you will
need to create a folder on the card called “Get Staff”
to be able to play the music files.
Section 3C. Entertainment: Sprint TVand Sprint Music 165
If the phone is running more than one simultaneous
application (such as Music Store, Application [from My
Stuff], and Games), the user interface can begin to slow
down and result in music or sound interruptions.
ⅢTo solve this type of issue, it is best to close down
all other applications (Menu > My Stuff > Options >
My Content Manager) before initiating a new
application.
Also, in some situations, the camera orcamcorder may
have limited functionality or become unavailable. For
example, if you were currently playing music (via the
Music Store), orplaying a game in the background, and
then wanted take a photo, the phone may prompt you
with a “CPU Low, Kill the Application” dialog. This
indicates that the current phone resources are stretched
and one of the current applications should be
terminated before continuing. Refer to the procedure
above to exit eithera specific application or all current
applications, and then launch the camera orcamcorder
again.
Sprint Music Manager
The Sprint Music Manager application is a program you
can download to yourcomputer to help you organize,
manage, and play all your music. You can also use the
Sprint Music Manager to copy your compatible music
files right from yourcomputer to your phone’s microSD
card (using the adapter oran optional USB connection),
including purchases you make from the Sprint Digital
Lounge.
Getting Sprint Music Manager
1. On yourcomputer, go to www.sprint.com/downloads
and download the Sprint Music Manager application.
2. Follow the onscreen instructions to install and
launch the application, including accepting the
license agreement and rebooting your computer, if
necessary.
Sprint TV / Sprint Music
166 Section 3C. Entertainment: Sprint TVand Sprint Music
Launching Sprint Music Manager
ᮣDouble-click the Sprint Music Manager icon on your
computer’s desktop (orselect Start > Programs >
Sprint Music Manager > Sprint Music Manager). The
application launches and displays the main menu.
Overview of Sprint Music Manager
Sprint Music Manager makes it easy to organize music
on yourcomputer, acquire new music from the Sprint
Digital Lounge, and transfermusic to your phone’s
microSD card.
The Sprint Music Manager application screen is divided
into three tabs:
ⅷManage allows you to organize and manage all the
music on yourcomputer. Click Search to look for
compatible music files on yourcomputer (including
MP3, WMA, MP4, and WAV), and then use the window
to organize your songs and create playlists. The
Manage tab also has a built-in player to let you play
yoursongs on your computer.
ⅷGet New lets you use Sprint Music Managerto sign on
to the Sprint Digital Lounge and purchase new music
for your phone and yourcomputer.
ⅷTransfer Music makes it easy to transferyour music
from yourcomputer to your phone’s microSD card,
using an optional USB connection.
Note The first time you use Sprint Music Manager, an
onscreen Quick Start Guide will offera tourof the
application. Follow the instructions to learn more.
Section 3C. Entertainment: Sprint TVand Sprint Music 167
Streaming Music
In addition to the Sprint Music Store, Sprint PowerVision
offers a variety of musical options through the Music
category in the Sprint TV menu, including SIRIUS Music,
Music Choice, VH1, and many others. Choose from
rock, pop, hip-hop, and R&B, and access exclusive
video clips, music industry news, performances, and
interviews with yourfavorite artists.
1. Press Menu > Entertainment > Music or TV >
[selection].
2. Select Preview to see and hear a preview of your
selected channel (if available).
–or–
Select Subscribe to purchase a monthly
subscription to yourselected channel.
Once you have purchased access to a music orradio
channel, you can select from a variety of stations to listen
to yourfavorite music or get caught up on what’s new in
music.
Sprint TV / Sprint Music
Section 4
Safety and Warranty
Information
170 Section 4A: Important Safety Information
Section 4A
Important Safety
Information
ࡗGeneral Precautions (page 170)
ࡗMaintaining Safe Use of and Access to Your Phone
(page 171)
ࡗUsing Your Phone With a Hearing Aid Device (page 172)
ࡗCaring for the Battery (page 174)
ࡗRadio Frequency (RF) Energy(page 175)
ࡗOwner’s Record (page 177)
ࡗUser Guide Proprietary Notice (page 177)
This phone guide contains important operational and safety
information that will help you safely use your phone. Failure
to read and follow the information provided in this phone
guide may result in serious bodily injury, death, or
property damage.
General Precautions
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
ⅷTo maximize performance, do not touch the bottom portion of
yourphone where the internal antenna is located while using
the phone.
ⅷSpeak directly into the mouthpiece.
ⅷAvoid exposing your phone and accessories to rain or liquid
spills. If yourphone does get wet, immediately turn the power
off and remove the battery.
ⅷDo not expose your phone to direct sunlight forextended
periods of time (such as on the dashboard of a car).
ⅷAlthough yourphone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting,
bending, or sitting on it.
ⅷAny changes ormodifications to yourphone not expressly
approved in this document could void your warranty for this
equipment and void your authority to operate this equipment.
Note For the best care of your phone, only Sprint-authorized
personnel should service your phone and accessories.
Failure to do so may be dangerous and void your
warranty.
Section 4A: Important Safety Information 171
Maintaining Safe Use of and
Access to Your Phone
Do Not Rely on Your Phone for Emergency Calls
Mobile phones operate using radio signals, which cannot
guarantee connection in all conditions. Therefore you should
never rely solely upon any mobile phone for essential
communication (e.g., medical emergencies). Emergency calls
may not be possible on all cellularnetworks or when certain
network services or mobile phone features are in use. Check
with yourlocal service providerfor details.
Using Your Phone While Driving
Talking on your phone while driving (or operating the phone
without a hands-free device) is prohibited in some jurisdictions.
Laws vary as to specific restrictions. Remember that safety
always comes first.
Following Safety Guidelines
To operate your phone safely and efficiently, always follow any
special regulations in a given area. Turn your phone off in areas
where use is forbidden or when it may cause interference or
danger.
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, RF signals from wireless
phones may affect inadequately shielded electronic equipment.
RF signals may affect improperly installed orinadequately
shielded electronic operating systems orentertainment systems
in motor vehicles. Check with the manufacturer or their
representative to determine if these systems are adequately
shielded from external RFsignals. Also check with the
manufacturer regarding any equipment that has been added to
your vehicle.
Consult the manufacturer of any personal medical devices, such
as pacemakers and hearing aids, to determine if they are
adequately shielded from external RFsignals.
Turning Off Your Phone Before Flying
Turn off your phone before boarding any aircraft. To prevent
possible interference with aircraft systems, the U.S. Federal
Aviation Administration (FAA) regulations require you to have
permission from a crew memberto use yourphone while the
plane is on the ground. To prevent any risk of interference, FCC
regulations prohibit using your phone while the plane is in
the air.
Note Always turn off the phone in healthcare facilities, and
request permission before using the phone near
medical equipment.
Tip Purchase an optional hands-free accessory at your
local Sprint Store, or call Sprint at 1-800-974-2221. You
can also dial # 2 2 2 on your phone.
Important Safety Information
172 Section 4A: Important Safety Information
Turning Off Your Phone in Dangerous Areas
To avoid interfering with blasting operations, turn your phone off
when in a blasting area or in other areas with signs indicating
two-way radios should be turned off. Construction crews often
use remote-control RFdevices to set off explosives.
Turn yourphone off when you’re in any area that has a
potentially explosive atmosphere. Although it’s rare, your phone
and accessories could generate sparks. Sparks can cause an
explosion orfire, resulting in bodily injury or even death. These
areas are often, but not always, clearly marked. They include:
ⅷFueling areas such as gas stations.
ⅷBelow deck on boats.
ⅷFuel or chemical transfer or storage facilities.
ⅷAreas where the aircontains chemicals or particles such
as grain, dust, ormetal powders.
ⅷAny otherarea where you would normally be advised to
turn off your vehicle’s engine.
Restricting Children’s Access to Your Phone
Your phone is not a toy. Do not allow children to play with it as
they could hurt themselves and others, damage the phone or
make calls that increase your Sprint invoice.
Using Your Phone With a Hearing
Aid Device
A numberof Sprint phones have been tested for hearing aid
device compatibility. When some wireless phones are used with
certain hearing devices (including hearing aids and cochlear
implants), users may detect a noise which can interfere with the
effectiveness of the hearing device.
Some hearing devices are more immune than others to this
interference noise, and phones also vary in the amount of
interference noise they may generate. ANSI standard C63.19
was developed to provide a standardized means of measuring
both wireless phone and hearing devices to determine usability
rating categories forboth.
Ratings have been developed for mobile phones to assist
hearing device users find phones that may be compatible with
their hearing device. Not all phones have been rated for
compatibility with hearing devices. Phones that have been rated
have a label located on the box. Your KATANA®Eclipse by
SANYO has an M4 and a T4 rating.
These ratings are not guarantees. Results will vary depending
on the user’s hearing device and individual type and degree of
hearing loss. If a hearing device is particularly vulnerable to
interference noise; even a phone with a higherrating may still
cause unacceptable noise levels in the hearing device. Trying
Note Never transport or store flammable gas, flammable
liquids, or explosives in the compartment of your
vehicle that contains your phone or accessories.
Section 4A: Important Safety Information 173
out the phone with yourhearing device is the best way to
evaluate it for your personal needs.
M-Ratings: Phones rated M3 orM4 meet FCC requirements for
hearing aid compatibility and are likely to generate less
interference to hearing devices than unrated phones. (M4 is the
better/higher of the two ratings.)
T-Ratings: Phones rated T3 orT4 meet FCC requirements and
are likely to be more usable with a hearing device’s telecoil (“T
Switch”or “Telephone Switch”) than unrated phones. (T4 is the
better/higher of the two ratings. Note that not all hearing devices
have telecoils in them.)
Hearing aid devices may also be measured for immunity to
interference noise from wireless phones and should have
ratings similarto phones. Ask your hearing healthcare
professional for the rating of yourhearing aid. Add the rating of
your hearing aid and your phone to determine probable
usability:
ⅷAny combined rating equal to or greater than six offers
excellent use.
ⅷAny combined rating equal to five is considered normal use.
ⅷAny combined rating equal to four is considered usable.
Thus, if you pairan M3 hearing aid with an M3 phone, you will
have a combined rating of six for“excellent use.” This is
synonymous forT ratings.
Sprint further suggests you experiment with multiple phones
(even those not labeled M3/T3 or M4/T4) while in the store to
find the one that works best with yourhearing aid device. Should
you experience interference or find the quality of service
unsatisfactory after purchasing your phone, promptly return it to
the store within 30 days of purchase. With the Sprint 30-day
Risk-Free Guarantee, you may return the phone within 30 days
of purchase for a full refund. More information about hearing aid
compatibility may be found at: www.fcc.gov, www.fda.gov, and
www.accesswireless.org.
Getting the Best Hearing Device
Experience With Your Phone
To further minimize interference:
ⅷSet the phone’s display and keypad backlight settings to
ensure the minimum time interval:
1. Press Menu > Settings > Display > Main Screen or
OuterScreen > Backlight.
–or–
Press Menu > Settings > Display > Keypad Light.
2. Select the minimum time interval setting and press .
ⅷPosition the phone so the internal antenna is farthest from
your hearing aid.
ⅷMove the phone around to find the point with least
interference.
Important Safety Information
174 Section 4A: Important Safety Information
Caring for the Battery
Protecting Your Battery
The guidelines listed below help you get the most out of your
battery’s performance.
ⅷRecently there have been some public reports of wireless
phone batteries overheating, catching fire or exploding. It
appears that many, if not all, of these reports involve
counterfeit or inexpensive, aftermarket-brand batteries with
unknown or questionable manufacturing standards. Sprint is
not aware of similar problems with Sprint phones resulting
from the properuse of batteries and accessories approved by
Sprint or the manufacturerof yourphone. Use only Sprint-
approved ormanufacturer-approved batteries and
accessories found at Sprint Stores or through yourphone’s
manufacturer, or call 1-866-343-1114 to order. They’re also
available at www.sprint.com — click Accessories. Buying
the right batteries and accessories is the best way to ensure
they’re genuine and safe.
ⅷIn order to avoid damage, charge the battery only in
temperatures that range from 32° F to 113° F (0° C to 45° C).
ⅷDon’t use the battery charger in direct sunlight orin high
humidity areas, such as the bathroom.
ⅷNever dispose of the battery by incineration.
ⅷKeep the metal contacts on top of the battery clean.
ⅷDon’t attempt to disassemble or short-circuit the battery.
ⅷThe battery may need recharging if it has not been used fora
long period of time.
ⅷIt’s best to replace the battery when it no longerprovides
acceptable performance. It can be recharged hundreds of
times before it needs replacing.
ⅷDon’t store the battery in high temperature areas for long
periods of time. It’s best to follow these storage rules:
Less than one month:
-4° F to 140° F (-20° C to 60° C)
More than one month:
-4° F to 113° F (-20° C to 45° C)
Disposal of Lithium Ion (Li-Ion) Batteries
Do not handle a damaged or leaking Li-Ion battery as you can
be burned.
For safe disposal options of your Li-Ion batteries, contact your
nearest Sprint authorized service center.
Special Note: Be sure to dispose of your battery properly. In
some areas, the disposal of batteries in household or business
trash may be prohibited.
Section 4A: Important Safety Information 175
Radio Frequency (RF)Energy
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it’s
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call
controls the power level. This power can range from 0.006 watt to
0.2 watt in digital mode.
Knowing Radio Frequency Safety
The design of yourphone complies with updated NCRP
standards described below.
In 1991–92, the Institute of Electrical and Electronics Engineers
(IEEE) and the American National Standards Institute (ANSI)
joined in updating ANSI’s 1982 standard for safety levels with
respect to human exposure to RF signals. More than 120
scientists, engineers and physicians from universities,
government health agencies and industries developed this
updated standard after reviewing the available body of research.
In 1993, the Federal Communications Commission (FCC)
adopted this updated standard in a regulation. In August 1996,
the FCC adopted hybrid standard consisting of the existing
ANSI/IEEE standard and the guidelines published by the
National Council of Radiation Protection and Measurements
(NCRP).
Body-Worn Operation
To maintain compliance with FCC RF exposure guidelines, if you
wear a handset on your body, use the Sprint supplied or
approved carrying case, holsteror otherbody-worn accessory. If
you do not use a body-worn accessory, ensure the antenna is at
least 0.945 inch (2.4 centimeters) from your body when
transmitting. Use of non-Sprint-approved accessories may
violate FCC RF exposure guidelines.
Formore information about RF exposure, visit the FCC Web site
at www.fcc.gov.
Specific Absorption Rates (SAR)for Wireless
Phones
The SAR is a value that corresponds to the relative amount of RF
energy absorbed in the head of a userof a wireless handset.
The SAR value of a phone is the result of an extensive testing,
measuring and calculation process. It does not represent how
much RF the phone emits. All phone models are tested at their
highest value in strict laboratory settings. But when in operation,
the SAR of a phone can be substantially less than the level
reported to the FCC. This is because of a variety of factors
including its proximity to a base station antenna, phone design
and other factors. What is important to remember is that each
phone meets strict federal guidelines. Variations in SARs do not
represent a variation in safety.
All phones must meet the federal standard, which incorporates
a substantial margin of safety. As stated above, variations in SAR
values between different model phones do not mean variations
Important Safety Information
176 Section 4A: Important Safety Information
in safety. SAR values at or below the federal standard of 1.6 W/kg
are considered safe foruse by the public.
The highest reported SAR values of the KATANA®Eclipse by
SANYO®are:
Cellular CDMA mode (Part 22):
Head: 0.600 W/kg; Body-worn: 0.231W/kg
PCS mode (Part 24):
Head: 0.912 W/kg; Body-worn: 0.283 W/kg
FCC Radio Frequency Emission
This phone meets the FCC Radio Frequency Emission
Guidelines.
FCC ID number: JOYSCP-6750.
More information on the phone’s SAR can be found from the
following FCC Web site: http://www.fcc.gov/oet/ea/.
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in
a particular installation.
Note This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
Section 4A: Important Safety Information 177
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
ⅷReorient the direction of the internal antenna.
ⅷIncrease the separation between the equipment and receiver.
ⅷConnect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
ⅷConsult the dealer or an experienced radio/TV technician for
help.
Owner’s Record
The model number, regulatory number, and serial number are
located on a nameplate inside the battery compartment. Record
the serial number in the space provided below. This will be
helpful if you need to contact us about your phone in the future.
Model: KATANA®Eclipse by SANYO®
Serial No.:
User Guide Proprietary Notice
CDMATechnology is licensed by QUALCOMM Incorporated
under one or more of the following patents:
4,901,307 5,109,390 5,267,262 5,416,797
5,506,865 5,544,196 5,657,420 5,101,501
5,267,261 5,414,796 5,504,773 5,535,239
5,600,754 5,778,338 5,228,054 5,337,338
5,710,784 5,056,109 5,568,483 5,659,569
5,490,165 5,511,073
T9 Text Input is licensed by Nuance Communications, Inc. and is
covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat.
6,011,554 and other patents pending.
User Guide template version 7B (December 2007)
Important Safety Information
178 Section 4B. Warranty
Section 4B
Manufacturer’s Warranty
ࡗManufacturer’s Warranty (page 179)
Your phone has been designed to provide you with reliable,
worry-free service. If for any reason you have a problem
with yourequipment, please referto the manufacturer’s
warranty in this section.
Forinformation regarding the terms and
conditions of service for your phone, please visit
www.sprint.com or call Sprint Customer Service at
1-888-211-4727.
Note In addition to the warranty provided by your phone’s
manufacturer, which is detailed on the following
pages, Sprint offers a number of optional plans to
cover your equipment for non-warranty claims.
Sprint Total Equipment Protection provides the
combined coverage of the Sprint Equipment
Replacement Program and the Sprint Equipment
Service and Repair Program, both of which are
available separately. Each of these programs may
be signed up for within 30 days of activating your
phone. For more details, please visit your nearest
Sprint Store or call Sprint at 1-800-584-3666.
Section 4B. Warranty 179
Manufacturer’s Warranty
Manufacturer’s Warranty
KYOCERA SANYO Telecom, Inc. (“KSTI”) offers you, the
original purchaser who has purchased the enclosed subscriber
unit (“Product”) only from an authorized dealer in the United
States, a limited warranty that the Product, including accessories
in the Product’s package, will be free from defects in material or
workmanship as follows:
A. ONE (1)YEAR LIMITED WARRANTY: Fora period of one
(1) year from the date of original purchase, KSTI will, at its option,
either repairor replace a defective Product (with new orrebuilt
parts/replacements).
B. LIMITED WARRANTYON REPAIRED/REPLACED
PRODUCTS: For a period equal to the remainder of the limited
warranty period on the original Product or, on warranty repairs
which have been effected on Products for 90 days after the date
of its repair or replacement, whichever is longer, KSTI will repair
or replace (with new orrebuilt parts/replacements) defective
parts or Products used in the repair orreplacement of the
original Product under the Limited Warranty on it.
Proof that the Product is within the warranty period in the form of
a bill of sale or warranty repair document that includes the date
of purchase, Product serial numberand the authorized dealer’s
name and address, must be presented to obtain warranty
service. This limited warranty is not transferable to any third party,
including but not limited to any subsequent purchaser orowner
of the Product. Transfer or resale of a Product will automatically
terminate warranty coverage with respect to it.
This limited warranty covers batteries only if battery capacity falls
below 80% of rated capacity orthe battery leaks. Also this limited
warranty does not coverany battery if (i) the battery has been
charged by a battery charger not specified or approved by KSTI
for charging the battery, (ii) any of the seals on the battery are
broken orshow evidence of tampering, or(iii) the battery has
been used in equipment other than the SANYO brand mobile
phone for which it is specified.
This limited warranty does not cover and is void with respect to
the following: (i) Products which have been improperly installed,
repaired, maintained ormodified (including the antenna); (ii)
Products which have been subjected to misuse (including
Products used in conjunction with hardware electrically or
mechanically incompatible or Products used with software,
accessories, goods or ancillary or peripheral equipment not
supplied or expressly authorized by KSTI for use), abuse,
accident, physical damage, abnormal use oroperation,
improper handling or storage, neglect, exposure to fire, wateror
excessive moisture ordampness or extreme changes in climate
or temperature, (iii) Products operated outside published
maximum ratings; (iv) cosmetic damage; (v) Products on which
warranty stickers or Product serial numbers have been removed,
altered, or rendered illegible; (vi) customerinstruction; (vii) cost
of installation, set up, removal orreinstallation; (viii) signal
Warranty
180 Section 4B. Warranty
reception problems (unless caused by defect in material or
workmanship); (ix) damage the result of fire, flood, acts of God or
other acts which are not the fault of KSTI and which the Product
is not specified to tolerate, including damage caused by
mishandling and blown fuses; (x) consumables (such as
memory cards, fuses, etc.); or (xi) any Products which have been
opened, repaired, modified oraltered by anyone otherthan KSTI
or a KSTI authorized service center.
This warranty is valid only in the United States.
REPAIR OR REPLACEMENT, AS HERE IN ABOVE
PROVIDED, IS YOUR SOLE AND EXCLUSIVE REMEDY
FOR BREACH OFTHE LIMITED WARRANTY. KSTI
SHALL HAVE NO LIABILITY FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES, INCLUDING, BUTNOT
LIMITED TO LOSS OFPROFITS, LOSTSALES, LOSS OF
DATA, LOSS OF USE OF THE PRODUCT, OR
ANTICIPATED PROFITS ARISING OUT OF USE OR
INABILITYTO USE ANY PRODUCT(FOR EXAMPLE,
WASTED AIRTIME CHARGES DUE TO THE
MALFUNCTION OF A PRODUCT). THIS WARRANTY
DOES NOTCOVER PRODUCTS SOLD “AS IS” OR
“WITH ALL FAULTS”. KSTI MAKES NO OTHER EXPRESS
WARRANTY WITH RESPECT TO THE PRODUCTS. THE
DURATION OF IMPLIED WARRANTIES, INCLUDING
IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE IS LIMITED TO
THE DURATION OF THIS EXPRESS WARRANTY.
Some States do not allow the exclusion or limitation of incidental
or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations orexclusions
may not apply to you.
This limited warranty gives you specific legal rights, and you
may have other rights which vary from State to State.
To obtain warranty service, contact
KYOCERA SANYO Telecom, Inc
Attention : Customer Services forWireless Products
Phone : 866-SANYOWC (866-726-9692)
Web : http://www.sanyowireless.com
181
This product contains NetFront Browserof ACCESS CO., LTD. ACCESS and
NetFront are trademarks or registered trademarks ofACCESS CO., LTD. in
Japan and other countries. This software is based in part on the work of the
Independent JPEG Group.
Copyright © 2008 InnoPath Software. All rights reserved.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and
any use of such marks by Kyocera Corporation is under license. Other
trademarks and trade names are those of their respective owners.
© 2008 Sprint. Sprint and the logo are trademarks of Sprint. Other marks are
the property of theirrespective owners. SANYO is a registered trademark of
SANYO Electric Co., Ltd. and used underlicense.
KYOCERASANYO Telecom, Inc. is a wholly-owned subsidiary of KYOCERA
International Inc.
Index
A
Abbreviated Dialing 27, 50
Airplane Mode 47
Alarm Clock 84
Answering Calls 21
Automatic Speech
Recognition (ASR) 86
B
Backlight 39
Battery
Capacity 16
Charging 17
Installing 17
Bluetooth 121 –128
Bookmarks 153
Browser Menu 151
C
Calculator 84
Calendar 80
Call Forwarding 140
Call Guard 62
Call Waiting 139
Caller ID 138
Camera 104 – 120
Chat 148
Clock Display 41
Contacts 69
Adding a Phone Number 73
Creating an Entry 69
Dialing From 28
Editing an Entry 73
Entry Options 72
Finding Entries 70
Secret Entries 76
Contrast 40
D
Data Roam Guard 63
Deleting Phone Content 56
Dialing Options 21
Display Language 50
Display Screen 11
Display Settings 39
E
Entering Text 29
Alphabet Mode 32
Emoticons 33
Numbers 33
Preset Messages 33
Selecting Input Options 29
Symbols 33
T9 Text Input 30
182 Index
Index 183
H
Headset Options 51
History 64
Deleting 68
Making a Call From 66
Menu Options 66
Prepending a Phone Number
67
Saving a Phone Number From
67
Thread 65
I
Icon indication 65, 109, 112
Illumination 40
Instant Messaging 148
K
Key Functions 9
Keytones 37
L
Location 43
Lock Code
Changing 54
Locking Your Phone 54
M
Making Calls 20
Maps 34
Menu ii
Menu Style 40
Messaging Settings
Deleting Old Messages 44
Notification 44
Setting Reminders 44
Signature 45
microSD Card 94
Adapter 94
Creating Folders 99
Formatting 99
My Content Manager 150
N
Net Guard 143
P
Phone (Illus.) 8
Phone Number
Displaying 19
Finding 26
Saving 26
With Pauses 26
Phone Settings 35
Airplane Mode 47
Auto-Answer Mode 49
Call Answer Mode 49
Display Settings 39 – 42
Location Settings 43
Messaging Settings 43 –46
Shortcut 49
Sound Settings 35 – 38
TTYUse 47 – 48
Preset Messages 33, 45, 137
Index
R
Resetting 57
Restricting Calls 55
RingerTypes 35
Roaming 60
Setting Roam Mode 61
S
Saving a Phone Number 26
Security 53
Silence All 38
Sleep Mode 42
SMS Text Messaging 136 – 137
SMS Voice Messaging
137 – 138
Special Numbers 56
Speed Dialing 29
Assigning Numbers 74
Sprint Music Manager 165
Sprint Music Store 162
Sprint Picture Mail
Downloading Photos and
videos 118
Sending 115 – 116
Uploading Photos and Videos
118
Web Site 117
Sprint Power Vision 141
Applications 141
Chat 148
Downloading Content 149
FAQs 156
Home Page 143
Launching 143
My Content Manager 150
Modem 154
Navigating the Web 144
Net Guard 143
Password 5
Security Features 58
User Name 142
Sprint Service
Account Passwords 4
Dialing Sprint Services 77
OperatorServices 6
Setting Up 2
Sprint 411 6
Sprint TV 158
Streaming Music 167
T
T9 Text Input 30
Taking Photos 104 – 109
Three-Way Call 139
TTY Use 47 – 48
Turning Your Phone On and Off
15
U
Unlocking Your Phone 54
184 Index
Index 185
V
Videos
Options 111
Recording 110
Settings 112
Voice Memos 89 – 91
Voice Services 86 – 93
Voicemail
Menu Key 135
Options 132
Retrieving 131
Setting Up 4
While Roaming 61
Volume 37
W
Warranty 179
Web 151 – 154
Wireless Backup 77
World Clock 85
Index
NOTES