L and Y Audio LB283 BLUETOOTH SPEAKER User Manual Harmony

Shenzhen L&Y; Aduio Co., LTD BLUETOOTH SPEAKER Harmony

User Manual Harmony

FCC Warning:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:・ Reorient or relocate the receiving antenna.・ Increase the separation between the equipment and receiver.・ Connect the equipment into an outlet on a circuit different from that to which the receiver is   connected.・ Consult the dealer or an experienced radio/TV technician for help.Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be located or operating in conjunction with any other antenna or transmitter.The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.CAUTIONThis symbol indicates that there are important operation & maintenance instructions in the literature accompanying this unit.RISK OF ELECTRIC SHOCK,DO NOT OPENThis symbol indicates that there are important operation & maintenance instructions in the literature accompanying this unit.To reduce the risk of fire or electrical shock,do not expose this product to rain ormoisture.The product must not be exposed to dripping and splashing and no object filled with liquids-such as a vase of flowers-should be placed on the product.Changes or modifications not expressly approves by the manufacturer could voidthe user is authority to operate this device.To prevent,electric shock ,match wide blade of plug to wide slot,full insert.WARINGCAUTIONCAUTIONStandbyPower LEDVolume+Bluetooth LED Volume-Bluetooth keyMICHarmony built in bluetooth V4.0 with 16watts output.The compact size easy to carry    out and enjoy the music from smart phone everywhere .Hope you will like it!!www.godreamwave.comSpecial features1. Bluetooth wireless signal transmission protocol.2. Line in input,compatible with PC,MP3/CD,mobile devices and other audio sources.3.Support phone hands-free.Battery ChargingRecommended charging time is three hours to fully charge the battery. The indicator of thecharging status lights When the battery charging .Charging status lights went out When thebattery full charge.  Connect it to DC 15V IN to reactivate the speaker when the speaker not turn on.Using the LINE IN  the connector A stereo audio cable with 3.5 mm plugs each end is required connect the audio output of PC or MP3/CD –players,ect device to the  LINE IN input on the speaker.  Adjust the volume on the connected device to near maximum,then use the Harmony speaker volume buttons to adjust the volume level.Note:Most standard Bluetooth device can connect with Harmony automatically.           But few some mobile phones should be connected by manually.5.Due to safety issue,the initial volume will be min every time power on. Please adjust the     volume from button.6.  Once the connection complete,the speaker will connect to latest device automatically.7.  Harmony include microphone.Once you have income call, the music will pause automatically.     Then press“      ”to pick up the phone call .When phone call complete,the music will play     again.8.  When music play.you also can press“      ”to pause/play the music.4.The speaker indicates pairing is complete when the Bluetooth indicater changes from flash    to  slow flash  and the speaker emits  a tone.Protection mode If the speaker is unplugged and unused for more than 24 days , or if the speaker is stored with a blinking red status indicator, it enters battery protection mode to preserve battery power. To reactivate the speaker,connect it to DC 15V IN.Note:         *If the device is not connected to the Bluetooth speaker ,please shut down and several           seconds after the restart , and connect with the Bluetooth speaker .          Power on/off Press the button “     ” to turn the speaker on or off.1.Press  the “      ” key to turn on the power, the blue LED will flash.    Then speaker step into pairing mode waiting for pair automatically.2. Turn your Bluetooth device  connection on,then searching the “Harmony” on your     device list.3. After find the “Harmony”,please connect with the speaker.After connection complete,    Then you are ready to enjoy the music from Harmony.Pairing and connecting bluetooth devicesTechnical informationRechargeable li-ion battery 4500mAh, up to 15 hoursplay time at about 2/3 of full volume,6 hours at max volume.full bass status.2 active driver,2passive driver,HI-FI sound,Anti-Distortion circuitry.HFC Function(hands free call)Product IntroductionNET Weight: 1.76  kgHarmony  X 1Ac adaptor  X 1AUX cable  X 1User guide  X 1How It Works Trouble shootingCharging speaker(Red LED light until complete charging)Wire connectionRecommended use       PC/DVD Player/iPod/CD Player/MP3a.Make sure what you are connecting is this speaker ( select “Harmony” within the    Bluetooth list on your device )b.Make sure the volume is not in the minimumc.Adjust the distance between the speaker and the Bluetooth device.d.Reset the speaker to its factory default settings. e.Clear the current pairing entry from your Bluetooth device. f.To isolate ,close other devices Bluetooth g.Try re-pairing the speaker and the Bluetooth device. 4.If the issue happens when connecting either on Bluetooth or Aux-in, please contact    DreamWave Customer Support via email.  ●       Applicable To: All DreamWave Bluetooth speakers ●      The trouble shooting steps in this article apply if audio is intermittent,    crackling or distorted when streaming via Bluetooth.2.If Step 1 is not the case, try listening to audio by connecting the speaker to the    Bluetooth device using the Aux-in cable. This will isolate if it's a Bluetooth connection    issue or not. Remember to disconnect/un-pair the Bluetooth connection first.1.Try playing other audio files. Ensure that audio can play fine from the same audio device    when using a headphone.3.If the issue only happens when connecting via Bluetooth, do the following:              HarmonyPower: 16wSIZE:61.5x64.5x231.5mm10 20LINE IN Charge ledDC 15VFCC ID :2AD2BLB283User GuideThank you for purchasing Harmony BLUETOOTH SPEAKER!Model: HarmonyTrade Mark: DREAMWAVEV4.0, A2DP AVECP

Navigation menu