L and Y Audio LB283 BLUETOOTH SPEAKER User Manual Harmony
Shenzhen L&Y; Aduio Co., LTD BLUETOOTH SPEAKER Harmony
User Manual Harmony
Product Introduction Technical information Charge led DC 15V LINE IN Power: 16w Model: Harmony Trade Mark: DREAMWAVE Power on/off Press the button “ User Guide 2 active driver,2passive driver, HI-FI sound, Anti-Distortion circuitry. V4.0, A2DP AVECP Power LED HFC Function(hands free call) Harmony 10 Thank you for purchasing Harmony BLUETOOTH SPEAKER! Harmony built in bluetooth V4.0 with 16watts output.The compact size easy to carry out and enjoy the music from smart phone everywhere .Hope you will like it!! www.godreamwave.com Standby Bluetooth LED Volume+ VolumeBluetooth key How It Works Charging speaker (Red LED light until complete charging) Rechargeable li-ion battery 4500mAh, up to 15 hours play time at about 2/3 of full volume,6 hours at max volume.full bass status. MIC 20 SIZE:61.5x64.5x231.5mm NET Weight: 1.76 kg Trouble shooting Wire connection ● ● Harmony X 1 Ac adaptor X 1 AUX cable X 1 Applicable To: All DreamWave Bluetooth speakers The trouble shooting steps in this article apply if audio is intermittent, crackling or distorted when streaming via Bluetooth. 1.Press the “ ” key to turn on the power, the blue LED will flash. Then speaker step into pairing mode waiting for pair automatically. 2. Turn your Bluetooth device connection on,then searching the “Harmony” on your device list. 3. After find the “Harmony”,please connect with the speaker.After connection complete, Then you are ready to enjoy the music from Harmony. 4.The speaker indicates pairing is complete when the Bluetooth indicater changes from flash to slow flash and the speaker emits a tone. a.Make sure what you are connecting is this speaker ( select “Harmony” within the Bluetooth list on your device ) b.Make sure the volume is not in the minimum c.Adjust the distance between the speaker and the Bluetooth device. d.Reset the speaker to its factory default settings. 1.Try playing other audio files. Ensure that audio can play fine from the same audio device when using a headphone. e.Clear the current pairing entry from your Bluetooth device. 2.If Step 1 is not the case, try listening to audio by connecting the speaker to the Bluetooth device using the Aux-in cable. This will isolate if it's a Bluetooth connection issue or not. Remember to disconnect/un-pair the Bluetooth connection first. g.Try re-pairing the speaker and the Bluetooth device. User guide X 1 Recommended use PC/DVD Player/iPod/CD Player/MP3 ” to turn the speaker on or off. Pairing and connecting bluetooth devices 3.If the issue only happens when connecting via Bluetooth, do the following: f.To isolate ,close other devices Bluetooth 4.If the issue happens when connecting either on Bluetooth or Aux-in, please contact DreamWave Customer Support via email. 5.Due to safety issue,the initial volume will be min every time power on. Please adjust the volume from button. 6. Once the connection complete,the speaker will connect to latest device automatically. 7. Harmony include microphone.Once you have income call, the music will pause automatically. Then press“ ”to pick up the phone call .When phone call complete,the music will play again. 8. When music play.you also can press“ ”to pause/play the music. Note:Most standard Bluetooth device can connect with Harmony automatically. But few some mobile phones should be connected by manually. Special features 1. Bluetooth wireless signal transmission protocol. 2. Line in input,compatible with PC,MP3/CD,mobile devices and other audio sources. 3.Support phone hands-free. Protection mode If the speaker is unplugged and unused for more than 24 days , or if the speaker is stored with a blinking red status indicator, it enters battery protection mode to preserve battery power. To reactivate the speaker,connect it to DC 15V IN. Battery Charging Recommended charging time is three hours to fully charge the battery. The indicator of the charging status lights When the battery charging .Charging status lights went out When the battery full charge. Connect it to DC 15V IN to reactivate the speaker when the speaker not turn on. Note: *If the device is not connected to the Bluetooth speaker ,please shut down and several seconds after the restart , and connect with the Bluetooth speaker . Using the LINE IN the connector A stereo audio cable with 3.5 mm plugs each end is required connect the audio output of PC or MP3/CD –players,ect device to the LINE IN input on the speaker. Adjust the volume on the connected device to near maximum,then use the Harmony speaker volume buttons to adjust the volume level. FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ・ Reorient or relocate the receiving antenna. ・ Increase the separation between the equipment and receiver. ・ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ・ Consult the dealer or an experienced radio/TV technician for help. CAUTION Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This symbol indicates that there are important operation & maintenance instructions in the literature accompanying this unit. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RISK OF ELECTRIC SHOCK,DO NOT OPEN This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be located or operating in conjunction with any other antenna or transmitter. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This symbol indicates that there are important operation & maintenance instructions in the literature accompanying this unit. To reduce the risk of fire or electrical shock,do not expose this product to rain or WARING moisture.The product must not be exposed to dripping and splashing and no object filled with liquids-such as a vase of flowers-should be placed on the product. CAUTION Changes or modifications not expressly approves by the manufacturer could void the user is authority to operate this device. CAUTION To prevent,electric shock ,match wide blade of plug to wide slot,full insert. FCC ID :2AD2BLB283
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Startup Profile : Print Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2015:02:05 15:20:21+08:00 Modify Date : 2015:02:05 15:20:21+08:00 Metadata Date : 2015:02:05 15:20:02+08:00 Creator Tool : PScript5.dll Version 5.2 Thumbnail Width : 256 Thumbnail Height : 52 Thumbnail Format : JPEG Thumbnail Image : (Binary data 8388 bytes, use -b option to extract) Document ID : uuid:47C0666607ADE411A9D3D53BCA8C44E7 Instance ID : uuid:23bd86b8-0932-4a13-9f34-b10efdd13f5d Derived From Instance ID : uuid:cc4b40f1-d6f3-49af-b6e7-9804a8086702 Derived From Document ID : xmp.did:BE1BD94C45ACE411A842C11C494C2735 Derived From Rendition Class : proof:pdf Has Visible Overprint : False Has Visible Transparency : False N Pages : 1 Max Page Size W : 734.483333 Max Page Size H : 399.698083 Max Page Size Unit : Millimeters Font Name : ArialMT, ArialNarrow, RTWSYueGoTrial-Light, AdobeSongStd-Light Font Family : Arial, Arial, 造字工房悦黑体验版, Adobe 宋体 Std Font Face : Regular, Narrow, 细体, L Font Type : Open Type, Open Type, Open Type, Open Type Font Version : Version 3.00, Version 2.37, Version 1.000;PS 1;hotconv 1.0.57;makeotf.lib2.0.21895, Version 1.002;PS 1;Core 1.0.38;makeotf.lib1.6.6565 Font Composite : False, False, False, False Font File Name : ARIAL.TTF, ARIALN.TTF, RTWSYueGoTrial-Light.otf, AdobeSongStd-Light.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : 鲜艳 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000002 Swatch Groups Colorants Magenta : 90.000004 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Format : application/postscript Title : Harmony锛圠B-283锛夎鏄庝功 3.01.LB283A00Y Creator : Administrator Page Count : 1 Author : AdministratorEXIF Metadata provided by EXIF.tools