L and Y Audio SIR200 Bluetooth Speaker User Manual

Shenzhen L&Y; Audio Co., LTD Bluetooth Speaker

User Manual

Power: 5W RMSCSR4.0+EDR, A2DP AVRCPNET Weight: 200g/0.2kg/0.44 lb/7.05 ozDimensions:102 x 95 x 43 mm/3.94 x 3.70 x 1.81 inch2" full range driver 360° omnidirectional soundIPX5 SplashproofWarranty card X 1User Manual X 1 AUX cable X 1 Charging cable X 1 GENIE X 1 USER GUIDEGENIE LINE IN 5VSmart Voice-control to activate Siri/Google NowShort press to Turn On/Off; long press for 3 seconds for Bluetooth pairing.“ ”Music That MovesCharging Indicator: Charging - Solid Red , Charging complete - Slight Red.Status IndicationHands-FreeAUX-INLINE IN 5V1.800mAh Rechargeable Li-Polymer BatteryPlay time: Up to 10 Hours(5 Hours at Max Bolume, Full Bass Status)LINE IN 5VMICHFC (Hands Free Calling)SpecificationsVoice control is capable based on: 1. Your phone is Siri or Google Now compatible; 2. Your phone's internet service is available.Power /BluetoothVoice Control /VolumeBlue light: Connected via BluetoothRed light: Connected via Line-in* GENIE will remember the previous Bluetooth connection and pair back automatically the next time turn it on. To pair with another device instead, long press the power button for 3 seconds, after a "Dong" tone and the Blue LED quick flash, repeat the normal Bluetooth connection procedure.Volume upVolume down1.Rotation for the bluetooth music, voice, the volume to add and subtract2. Short press - Pause/Play/pick up phone calls3. Long press for 3 seconds to activate voice control Could not activate Siri or Google Now1.Is your phone connected with GENIE properly? 2.Is the Internet Service available on your phone? This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Shenzhen L&Y Audio Co., LTDGenieBluetooth Speaker

Navigation menu