LCN Full Line Catalog LCNFull
User Manual: LCN LCN Full Line Catalog Catalog
Open the PDF directly: View PDF 
.
Page Count: 400
| Download | |
| Open PDF In Browser | View PDF |
Door
controls
General
information
History of
door closers & LCN
Trinity Church…
In 1876, Mr. L. C. Norton was sent to
Boston, Massachusetts to help build the
Boston Trinity Church. The church took
over four years to complete. The church
was located on the Back Bay facing south
and west thus at times, encountering some
very severe wind conditions. The church
began operation in 1880, the pastor, Rev. Brooks
and his congregation quickly found out that the strong winds
would make the doors close with a thunderous bang. Needless to
say, the pastor was not going to stand for all the noise; those doors
needed to be controlled! This prompted Mr. Norton to action.
Mr. Norton’s first attempt to remedy the situation was to hang
the doors on double-spring hinges. Mr. Norton had now uncovered
a second problem. The slamming stopped but now the strong
winds made the doors stand open. The cold, drafting air raised
protest amongst the people in the church. He tried rubber stops,
special door linings, and some other ideas. Nothing worked. One
day, continuing to ponder the problem with the doors at the Trinity
Church, he put some things away in a closet and being in a hurry,
he threw the door shut. To his amazement, the door did not slam.
Instead, the door bounced back. He tried this over and over with
the same result. An idea came to him; he rushed to town and
purchased a beer pump. With the beer pump, a makeshift arm,
and some special brackets he had designed, Mr. Norton installed
his invention on one of the exterior church doors. He opened the
door and let it go…CRASH! The door slammed so hard it broke the
pump into many pieces.
Mr. Norton spent many months trying to solve the problem;
finally, he used the principles of the lever, improved the main
components, and decided to reposition the device on the door.
He took his updated version and again installed it on one of
the troublesome church doors. Rev. Brooks saw Mr. Norton’s
new design and to his delight, the closer worked perfectly. Mr.
Norton had used air pressure to make the doors close quietly. The
problems with the doors at the Boston Trinity Church were now
solved.
2
Growing Pains…
Soon after the doors at the Trinity Church were under control,
Mr. Norton formed a company to manufacture his new found
invention. The factory was located in Boston, Massachusetts and
business started out strong. In fact, at times, there were more
orders than production could match.
Time flew by. Mr. Norton’s company began to experience difficulty.
Competition was fierce. Some competitors began to infringe on
patents, which drained Mr. Norton of both cash flow and other
resources. Mr. Norton also made a few business decisions that
would hamper company growth. The early years presented other
challenges too. New closer designs were being introduced at an
increasingly fast pace. This quick growth brought about some
challenging quality issues. Business associates both good and bad,
came and went. The factory moved to Brooklyn, New York and
then back to Boston, Massachusetts. In these years, the door closer
business was a volatile one. Most good companies were forced into
change whether they liked it or not. The door closer industry was
no exception.
New Beginnings…
Competition drove Mr.
Norton in a new direction.
His air check had worked
well but was slowly giving
way to new technology.
In 1900, Mr. Norton
developed a liquid door
check. This new liquid
door check controlled
the door through the
entire door swing by incorporating three independent hydraulic
regulations. Back-check, general speed, and latch speed were
necessary for total door control. In 1908, the company was moved
to Chicago, Illinois. By the early 1920’s, the door closer business was
doing well but Mr. Norton was wearing down, he needed help.
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
General
information
History of
door closers & LCN
In 1925, Mr. L. C. Norton teamed with Mr.
D. R. Lasier and formed the Norton-Lasier
Company. The business was located at
466 West Superior Street in Chicago, Illinois.
Norton & Lasier knew that if their company
was to survive, they must build a far superior
product at a very fair price. They called their
improved door closer an LCN. After a few years,
Mr. Norton left the business to Mr. Lasier and moved
to California. During the years of 1926 through 1948, under the
leadership of Mr. D. R. Lasier, LCN manufactured and shipped
high-quality traditional
style closers all over
the world. Many of
these closers are still
in use today. In 1949,
the factory moved to
Princeton, Illinois. In
1958, LCN introduced the
heavy-duty 4010/4110
series closer. Schlage Lock Company purchased LCN in 1959. In
1974, Ingersoll-Rand purchased Schlage Lock Company (and
LCN). Today, LCN offers a complete line of door control products
including heavy-duty hydraulic closers, power operators, fire/life
safety closer/holders, high security closers & more.
The model numbers
may have changed
but the passion,
quality, and
excitement will
always remain. LCN
closers are made with
premier materials
and our products are
tested far beyond the industry requirements.
1851
1880
1881
1900
1908
1917
1925
1929
1930
1937
1942
1948
1958
1959
1972
1973
1974
1978
1980
1981
1981
1985
1993
1995
1996
1998
2006
2006
2007
2007
2007
2013
2015
–
–
–
–
–
–
–
–
Lewis C. Norton born May 5th in New Hampshire.
First door closer installed at Boston Trinity Church.
Manufacturing begins at Boston plant.
Mr. Norton introduces a liquid door check.
Company moves to Chicago.
David R. Lasier joins company as timekeeper.
Norton-Lasier Company begins operation.
L. C. Norton moves to California. D. R. Lasier
heads up company.
– Norton-Lasier Company produces wooden riding toys to cope
with the Great Depression.
– L. C. Norton passes away on November 4th.
– Norton-Lasier Company produces hydraulic
aircraft fittings for the war effort.
– Norton-Lasier Company officially changes name to LCN.
– LCN introduces the 4010/4110 series door closer.
– LCN sold to Schlage Lock Company.
– LCN introduces Sentronic line of fire/life safety holder/closers.
– LCN introduces the 4040 series door closer.
– Schlage Lock (and LCN) sold to Ingersoll-Rand.
– LCN introduces Equalizer units.
– Production on traditional series ends.
– LCN introduces the 1460 series door closer.
– LCN introduces AutoEqualizer™ units.
– LCN introduces the 1070 series door closer.
– LCN introduces the powder coat finish.
– LCN introduces Electric Operator units.
– LCN introduces the 1520 series door closer.
– LCN introduces the 1370 series door closer.
– LCN introduces the new 4030 series door
closer to replace the 1520 closer series.
– LCN introduces the new Senior, Astro and
Middle Swing Digital Control Box.
– LCN introduces the new Tri-Volt Magnets.
– LCN introduces the new 4040XP.
– LCN introduces the new 1260 Series.
– In December of 2013, the Security Technologies division of
Ingersoll Rand became its own publicly traded company
called Allegion.
– LCN introduces the 1250, 1450 and 4050 series cast
aluminum door closers.
3
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
General
information
Table of contents
GENERAL INFORMATION
History of Door Closers & LCN.............................................................2-3
Table of Contents...................................................................................... 4
Finishes..........................................................................................................5
Warranty....................................................................................................... 6
Door Closer Specialists..............................................................................7
Specifications....................................................................................... 8-10
ANSI Cross Reference..........................................................................11-13
Materials......................................................................................................14
Proper Door Control.................................................................................15
Mechanical Considerations............................................................. 16-21
Glossary of Abbreviations..................................................................... 22
Glossary of Terms................................................................................23-31
HIGH SECURITY CLOSERS SERIES
Product Selection Guide........................................................................1-2
2210 Series............................................................................................... 3-6
4210 Series..............................................................................................7-10
4210T Series.......................................................................................... 11-14
4510 Series............................................................................................ 15-18
4510T Series........................................................................................ 19-22
AUTOMATIC OPERATORS
Product Selection Guide....................................................................... 1-5
Pneumatic Powered Systems.............................................................7-9
2610 Series............................................................................................. 11-14
4810 Series........................................................................................... 15-18
4820 Series.......................................................................................... 19-22
4840 Series......................................................................................... 23-27
7900 Series Control Boxes.............................................................. 28-31
Electrohydraulic Powered Systems..............................................32-34
4630/4640 Electrohydraulic Series............................................ 35-36
4630 Series...........................................................................................37-41
4640 Series.........................................................................................43-47
Electromechanical Powered Systems........................................49-53
Benchmark Unique Features...............................................................54
9130 Series..........................................................................................55-59
9140 Series...........................................................................................61-65
9150 Series...........................................................................................67-70
Senior Swing Unique Features............................................................. 71
2810 Series........................................................................................... 73-78
2850 Series.........................................................................................79-84
2860 Series....................................................................................... 85-90
9530 Series..........................................................................................91-95
9540 Series........................................................................................97-101
9550 Series..................................................................................... 103-108
9560 Series......................................................................................109-114
Actuators, Sensors & Accessories................................................115-131
4000 SERIES SURFACE MOUNTED CLOSERS
Product Selection Guide........................................................................1-2
4010 Series.............................................................................................. 3-6
4010T Series............................................................................................ 7-11
4020 Series.......................................................................................... 13-16
4020T Series......................................................................................... 17-21
4030 Series........................................................................................ 23-30
4030T Series....................................................................................... 31-36
4040XP Series...................................................................................37-45
4040XPT Series.................................................................................47-53
4050 Series........................................................................................ 55-63
4050T Series........................................................................................65-71
4110 Series.............................................................................................73-77
4110T Series........................................................................................ 79-83
4000T Series.....................................................................................85-88
1000 SERIES SURFACE MOUNTED CLOSERS
Product Selection Guide........................................................................1-2
1250 Series..............................................................................................3-10
1260 Series............................................................................................. 11-18
1450 Series...........................................................................................19-26
1460 Series...........................................................................................27-34
1460T Series........................................................................................ 35-41
DOOR HARDWARE
PAH60.............................................................................................................1
CONCEALED CLOSERS SERIES
Product Selection Guide........................................................................1-2
2010 Series............................................................................................... 3-6
2030 Series.............................................................................................. 7-11
3030 Series........................................................................................... 13-16
3130 Series............................................................................................17-20
5010 Series...........................................................................................21-24
5030 Series......................................................................................... 25-28
6030 Series.........................................................................................29-32
LCN
121 West Railroad Avenue
P.O. Box 100
Princeton, IL 61356-0100
FIRE/LIFE SAFETY CLOSER/HOLDERS SERIES
Product Selection Guide........................................................................1-3
SEM Series..............................................................................................5-10
3130SE Series........................................................................................ 11-14
4040SE Series.................................................................................... 15-20
2310ME Series......................................................................................21-24
4310ME Series.................................................................................... 25-29
4410ME Series.....................................................................................31-35
4310 HSA Series................................................................................ 37-40
4410 HSA Series.................................................................................41-44
SEH Series...........................................................................................45-48
4
For SSC Representative contact information, please visit
www.allegion.com/us and click “Contact Us”
To view or download an electronic copy, visit
www.allegion.com/us.
LCN reserves the right to change the information
contained in this catalog without notice.
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
General
information
Finishes
STANDARD POWDER COAT FINISHES
LCN powder coating provides superior protection
against the effects of weather conditions and is an
environmentally friendly process. The high quality, chip
resistant finish is far superior to any previously offered.
Corrosion resistance surpasses 100 hours salt spray
testing (four times the industry standard). Non-metallic
components also provide the same high resistance to the
effects of the elements. All LCN products must be shipped
with a finish.
LCN STANDARD FINISHES
(CLOSEST BHMA EQUIVALENT):
ALUM
ALUMINUM (BHMA 689)
OPTIONAL PLATED FINISHES
Visible components such as metal covers, arms, fasteners, and finish plates
are plated to match the selected finish. Surface mounted tracks are powder coated
to compliment the plated finish. Hidden assemblies such as cylinders, tracks, and
mounting plates are supplied with a powder coated finish. Plated finishes require
handing of closers.
LCN PLATED FINISHES:
US 3
US 4
US 10
US 11
US 15
US 26
US 26D
Bright Brass (BHMA 632)
Satin Brass (BHMA 633)
Satin Bronze (BHMA 639)
Satin Bronze (BHMA 643)
Satin Nickel (BHMA 646)
Bright Chrome (BHMA 651)
Satin Chrome (BHMA 652)
LCN PAINTED FINISHERS
Aluminum
Dark Bronze
DKBRZ
DARK BRONZE (BHMA 695)
STAT
STATUARY BRONZE (BHMA 690)
ALUM (BHMA 689)
DKBRZ (BHMA 695)
SPECIAL RUST INHIBITING (SRI) PROCESS
For installations where a higher level of protection against weather conditions, or
the effects of a potentially corrosive atmosphere is required, LCN offers a special rust
inhibiting (SRI) process. Ferrous metal components receive an SRI pretreatment and
a standard powder coat finish of your choice, or a custom powder coat finish for a
nominal additional cost. Closers treated with the SRI process exceed the 100 hour
protection level available with standard LCN powder coated finishes. For details,
contact your local SSC representative or the LCN factory.
STANDARD ANODIZED FINISHES
LTBRZ
LCN Senior Swing & Benchmark electromechanical power operators are offered with
an anodized finish. Anodizing is an electrochemical process that thickens and toughens
the protective oxide on aluminum metal.
LIGHT BRONZE (BHMA 691)
LCN ANODIZED FINISHES:
Aluminum
Dark Bronze
BLK
BLACK (BHMA 693)
BRASS
BRASS (BHMA 696)
ANCLR (BHMA 628)
ANDKBRZ (BHMA 710)
OPTIONAL CUSTOM POWDER COAT FINISHES
LCN offers custom powder coating to provide a custom
appearance and all the corrosion resistance of standard
powder coat finishes at a nominal additional cost. LCN
uses the RAL numbering system for the 150+ custom
colors available. Contact your local SSC representative
for a brochure showing the available custom colors. Note:
Custom powder coat finishes require a metal cover.
5
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
General
information
Limited Warranty
Subject to the terms and conditions of this limited warranty, Schlage Lock Company, LLC (the “Company’) extends a limited warranty against defects in
material and workmanship for its LCN branded product(s) identified in the Product Table below (“Products”) as installed in the original location.
This limited warranty applies to Products purchased on or after March 3, 2014.
Product Table - Cast Iron
4000 Series
30 Years
1460 Series
30 Years
1260 Series
20 Years
Concealed, High Security (except 2210DPS)
15Years
Automatic Operators; SE, ME, HSA, SEH Series; SEM Magnets; 2210 DPS
(includes both electronic and mechanical components)
2 Years
Product Table - Cast Aluminum
1250 Series
15 Years
1450 Series
25 Years
4050 Series
25 Years
Term: The limited warranty period for Products is as stated in the Product Table above. The “Commencement Date” for a limited warranty
period shall be the date of Company’s delivery to the original purchaser of the Products. Proof of Product purchase may be required by Company to
confirm the Commencement Date.
What Company will do: Company may require proof of Product purchase in order to provide coverage under this limited warranty. As Company’s
only responsibility and user’s only remedy under this limited warranty, Company will furnish a replacement Product upon receipt and confirmation
by Company, in its sole opinion, that the Product has, in fact, failed due to a manufacturing defect under normal use and maintenance. In the event a
replacement Product cannot be provided, Company will either provide a suitable replacement Product or a refund in the amount of the original purchase
price.
What is not covered: The following costs, expenses, and damages are not covered by the provisions of this limited warranty: (i) labor costs including, but
not limited to, such costs as removal and installation of Product; (ii) shipping and freight expenses required to return Product to Company; (iii) failures,
defects, or damage caused by any third party product or service; (iv) any other incidental, consequential, indirect, special and/or punitive damages,
whether based on contract, warranty, tort (including, but not limited to, strict liability or negligence), patent infringement, or otherwise, even if advised of
the possibility of such damages.
The provisions of this limited warranty do not apply to Product that is: (i) not the proper size for the application for which the Product is used; (ii)
not installed in accordance with Company’s published Product installation instructions; (iii) installed with improper parts and/or incorrect parts (NOTE:
It is recommended that Product be installed with LCN fasteners provided with Product); (iv) improperly stored, maintained, or operated; (v) modified,
repaired, or altered in Company’s sole opinion, in any manner, without the express written consent of Company; (vi) used for purposes for which the
Product is not designed or intended; (vii) subjected to misuse, abuse, negligence, or accident; or (vii) subjected to improper temperature, humidity, or
other environmental conditions.
Note: 900/7900 Series compressors are not manufactured by Company and are excluded from coverage under this limited warranty. For more
information, parts, or repairs concerning the compressors, contact the compressor manufacturer directly at (269) 926-6171.
Additional Terms: This limited warranty is in lieu of all other warranties, express or implied. Company does not authorize any person to create for it
any obligation or liability in connection with Product. Company’s maximum liability hereunder is limited to the original purchase price of the Product. No
action arising out any claimed breach of this limited warranty by Company may be brought by the user more than one (1) year after the cause of action
has arisen.
How local law applies: This limited warranty gives you specific legal rights, and you may also have other rights as permitted by law. Some local laws do
not allow limitations on how long an implied warranty lasts or the exclusions or limitation of incidental or consequential damages so the limitations or
exclusions provided herein may not apply to you.
Program and Warranty Claims: If product is to be claimed to be defective under this limited warranty, contact Customer Care at (877) 671-7011.
Note: Please contact LCN Customer Care prior to returning any product back to the factory. You will need prior authorization and an RMA for your return.
6
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Since its founding in 1926, LCN has specialized in solving door control problems through the use
of high quality, innovative door control products. By adhering to high standards of performance,
LCN has earned a leadership role within the industry and is committed to meeting door control
challenges of the future. With representatives located throughout the world, LCN provides the
products and services necessary to solve your door control problems.
General
information
Door closer specialist
The LCN formula for success
Materials
LCN is committed to providing
the best door closers in the world.
In addition to the mechanical
advantages derived from proven
designs, much of the durability
of the closer and arm system is
related to the materials used in
their manufacturing.
Extensive Abuse Test
Why do some hardware
professionals claim that LCN
stands for “Last Closer Needed?”
LCN closers are put through
grueling tests in which they
exceed industry requirements.
Forged Steel Arms
The closing power and control
generated within LCN closers is
transferred to the door through
forged steel arms. Forged steel
arms have greater strength, better
appearance and less bulk.
Chrome Silicon
Many closer manufacturers use
less expensive oil-tempered
springs, but LCN engineers know
that such a spring loses up to 20%
of its power after a few thousand
cycles.
Heat-Treated
LCN steel pinions have larger,
stronger teeth and are double
heat-treated for the greatest
possible strength on the shaft.
Heat-treating makes the pinion
harder, better able to resist wear
after years of service and results
in less stress on the cylinder.
Special Templates
When a standard door closer
won’t do the job, there is only one
proven, reliable source for special
solutions — LCN. With over 3,000
special templates on file, LCN can
provide a door control solution for
one-of-a-kind doors such as vault,
balanced, over-sized and arch
doors.
Hydraulic Fluid
LCN uses a special formula
hydraulic fluid with special
lubrication properties to keep
closer components working
smoothly. This unique all-weather
hydraulic fluid eliminates the
need for seasonal adjustments.
Customer Service
At a time when machines are
picking up more and more
customer calls, real people are
answering the phones at LCN.
Every member of our customer
service staff is trained and
qualified to assist you with orders,
closer selection and special
applications.
7
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
General
information
Specifications
PART 1 - GENERAL
1.1 QUALITY ASSURANCE
PART 2 - PRODUCTS
2.3 MATERIALS AND FABRICATION
A. Reference Standards
1. American National Standards Institute
(ANSI/BHMA):
A117.1 Providing Accessibility and Usability
for Physically Handicapped People
A156.10 For Power Operated Pedestrian Doors
A156.4
Door Controls - Closers
A156.15 Life Safety Closer Holder Release Devices
A156.18
Materials and Finishes
A156.19 Power Assist and Low Energy Power
Operated Doors
2. Americans with Disabilities Act (ADA)
3. American Society for Testing and Material (ASTM):
Specification B117-9 Method of Finish Corrosion Testing
4. Underwriters Laboratory (UL):
228
Door Closers-Holders
UL10C Standard Positive Pressure Fire
Test of Door Assemblies
UL10B Standard for Fire Test of Door Assemblies
5. National Fire Protection Association (NFPA)
No. 80
Fire Doors and Windows
No. 101
Life Safety Code
A.
2.8 CLOSERS AND DOOR CONTROL DEVICES
B.
Source Quality Control
1. Obtain each kind of hardware (latch and lock sets, hinges,
closers, etc.) from only one manufacturer, although several may
be indicated as offering products complying with requirements.
2. All products shall meet grade 1 or the highest level
of cycle test requirements of the applicable
ANSI/BHMA standard.
C.
Supplier Qualifications
1. Supplier must be a recognized builders hardware supplier who
has been furnishing hardware in the projects vicinity for a period
of not less than two years.
2. Supplier must be or employ an experienced hardware
consultant who is available, at reasonable times during
the course of the work, for consultation about the project’s
hardware requirements, to Owner, Architect, and Contractor.
D.
Fire-rated Openings
1. Provide hardware for fire rated openings in compliance with
NFPA Standard No. 80, NFPA Standard No. 101, and local
building codes.
2. [Manual hold-open arm function not allowed.] Provide
hardware which has been tested and listed by UL for types and
sizes of doors required and complies with the requirements of
door and frame labels.
8
General
1. Closers shall be installed to allow door swing as shown
on plans. Doors swinging into exit corridors should provide for
corridor clear width as required by codes.
A. General
All closers shall be as manufactured by LCN CLOSERS, Princeton,
Illinois, USA, and shall have the following features:
1. [ Applies to 4010, 4020, 4110, 4210, 4510, 5010 Series
only.]All manual door closers shall be certified to exceed 15
million (15,000,000) full load operating cycles by a recognized
independent testing laboratory.
2. All closers shall carry manufacturer’s warranty, as stated on
page 6.
3. All closers with electrical or pneumatic components shall carry
a manufacturers two (2) year warranty.
[Items 4 through 12 apply to closer cylinder, items 13
through 16 apply to closer arms.]
4. [Delete for 1250, 1450, and 4050] Fully hydraulic, rack and
pinion action with high strength cast iron cylinders and one
piece forged steel pistons.
5. Fluid of a type requiring no seasonal adjustments.
6. [ Delete for 1460, 1260, 3030, 3130 4030 4040XP, 1250,
1450, and 4050 Series. 4040XP has a minimum 3/4”
pinion shaft diameter.] Pinion shaft minimum diameter of
11/16”.
7. Hydraulic regulation controlled by tamper-proof, non-critical
screw valves, adjustable with a hex wrench.
8. Separate adjustments for backcheck, general speed, and latch
speed.
9. [ Applies to 1450, 1460, 4010, 4020, 4040XP, 4050,
4110, 4210, 4510, 5010 Series.] Where detailed on
double lever arm closers, provide a delayed action feature to
delay closing up to one minute from maximum opening to
approximately 75º.
10. Backcheck shall be properly located for protection of the door,
frame, and applied hardware.
11. [Applies to 2210, 4110, 4210, 4210T, 4510, and 4510T
Series only.] Where detailed, provide advanced variable
backcheck to start backcheck function at approximately 45º.
12. Include high efficiency, low friction full compliment pinion
bearings.
13. [Delete for 1260, 1460, 6030 Series.] Forged steel main
arms.
14.
[Applies to 4110, 4210, 4510 Series and all EDA and CUSH
arms.] Forged steel main and forearms.
15. [Applies to all single lever arm (track type) closers.]
Where detailed, provide a quiet, low friction track and roller
assembly and provisions for an optional bumper assembly to
assist backcheck and/or hold-open clip.
16. [Applies to all double lever arm closers, except EDA or
CUSH arms.] Reversible shoe to increase latching power of the
closer.
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
General
information
Specifications
B.
Size of Closers
1. Sized in accordance with ANSI/BHMA Standard A156.4
as shown in the applicable TABLE OF SIZES listed in the current
LCN General Catalog.
2. Closing power of non-sized cylinders shall be adjustable over
a range of sizes;[Applies to 1250, 1261, 1450, 1461, 1460T,
4011, 4021, 4040SE, 4040XP, 4040XPT, 4041DEL,
4050, 4111, 4211, 4511, 4631, 4642, 4811, 4822, 4841,
4031, 4031T Cylinders.]
C.
Barrier Free Manual Closers
1. All closers for openings that must meet the minimum
requirements of the ADA act, in lieu of ANSI/BHMA Standard
A156.4, shall be sized in accordance with the applicable
REDUCED OPENING FORCE table in the current LCN General
Catalog.
2. All size 1 manual closers shall provide or be adjustable to
provide less than 5 pounds opening force on a 36” door leaf and
delay closing time in accordance with the ADA requirements.
D.
Combination Door Closers and Holders
1. Provide closer/holders designed to hold the door in the open
position under normal usage and to release and automatically
close the door under fire conditions. Closer will include an
integral electromagnetic holder mechanism designed for use
with UL listed fire detectors, provided with normally closed
switching contacts.
2. [Applies to all ME models.]
Where detailed, multi-point closer/holders shall incorporate a
hold-open bypass feature from 0º
up to either 80º or 140º.
3.
[Applies to 4310 ME only.]
Where detailed, multi-point closer/holders shall
provide a swing-free function with a no-drift feature.
E.
High Security Closers
1. Provide closers designed to resist vandalism and tampering.
2. All exposed fasteners shall be TORX machine screws
with a security pin.
3. All closer adjustments shall be shielded by the cover
or finish plate, after installation.
4. Arm and, where furnished, high security roller assembly shall be
designed to prevent disassembly.
5. [ 4210 and 4510 Series only.] All surface mounted high
security closers shall include a cast iron cylinder certified by an
independent testing laboratory to exceed fifteen
million (15,000,000) operating cycles, heavy gauge
metal covers with four mounting screws and double
lever arms manufactured to prevent disassembly.
6. [4210T and 4510T Series only.] All surface mounted high
security closers shall include a cast iron cylinder certified by
an independent testing laboratory to exceed fifteen million
(15,000,000) operating cycles, heavy gauge metal covers with
four mounting screws, heavy duty arm with special security
roller, and a heavy gauge high security track designed to eject
foreign objects.
[2210 and 2210 DPS only.] All concealed high security closers
shall include a cast iron cylinder certified by an independent
testing laboratory to exceed fifteen million (15,000,000)
operating cycles, 3/8” steel mounting plate, heavy duty arm
with special security roller, and a heavy gauge high security
track designed to eject foreign objects.
8. [2210 DPS only.] A built-in door position switch shall be
optional with concealed closers.
7.
F.
Automatic Operators
1. Where low kinetic energy, as defined by ANSI/BHMA
Standard 156.19, automatic operators are indicated for doors
required to be accessible to the disabled. Provide pneumatic,
electrohydraulic or electromechanical [2610, 2810, 2850,
2860, 4630, 4640, 4810, 4820, 4840, 9130, 9140, 9150,
9530, 9540, 9550, 9560 Series] operators complying with
the ADA for opening force and time to close standards.
2. Full closing force shall be provided when the power or assist
cycle ends [2610, 2810, 2850, 2860, 4630, 4640, 4810,
4820, 4840, 9130, 9140, 9150, 9530, 9540, 9550, 9560
Series].
3.
[2610, 4810, 4820, 4840] Locate power unit and pneumatic
exhaust away from door to minimize noise and vibration in
pedestrian areas.
4. All automatic operator systems shall include the following
features and functions.
a) Provisions for separate conduits to carry high and low
voltage wiring in compliance with the National Electrical
Code, section 725-31.
b) The operator will be designed to prevent damage to the
mechanism if the system is actuated while the door is
latched or if the door is forced closed during the opening
cycle.
c) All covers, mounting plates and arm systems shall be
powder coated and successfully pass a minimum of 100
hours testing as outlined in ANSI/BHMA Standard A156.18
[2610, 4630, 4640, 4810, 4820, 4840 Series].
-Or d) Electromechanical automatic operators shall be standard
anodized either in aluminum or dark bronze. Custom
anodized finishes and custom paint are available and can
be specified. [2810, 2850, 2860, 9130, 9140, 9150,
9530, 9540, 9550, 9560 Series]
e) UL listed for use on labeled doors
f) [4630, 4640, 4810, 4820, 4840 Series] shall be nonhanded with spring power over a range of at least four
sizes either 1 through 4 or 2 through 5.
-Or g) [2810, 2850, 2860, 9130, 9140, 9150, 9530, 9540,
9550, 9560, Series] are handed and feature a spring
return.
9
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
General
information
Specifications
h) Provisions in the control box or module shall provide
control {inputs and outputs} for; electric strike delay,
auxiliary contact, sequential operations, fire alarm
systems, actuators, swing side sensors, stop side sensors.
[2610, 4630, 4640, 4810, 4820, 4840, 9130, 9140,
9150 Series]
5. [ 4630, 4640 Series] All electrohydraulic automatic
operators shall include the following features or functions:
a) Second Chance Feature: When an obstruction or
resistance to the opening swing is encountered the
operator will pause at that point, then attempt to
continue opening the door. If the obstruction or resistance
remains, the operator will again pause the door.
b) Easily accessible main power and maintain hold-open
switches will be provided on the operator.
c) An electronically controlled clutch to provide adjustable
opening force.
d) A microprocessor to control all motor and clutch
functions.
e) An on-board power supply capable of delivering both 12V
and 24V outputs up to a maximum of
1.0 ampere combined load.
f) All input and output power wiring shall be
protected by a resettable circuit breaker.
2.12 HARDWARE FINISHES
A. Finish
1. All closers with powder coat finishes shall exceed a minimum
100 hour salt spray test, as described in ANSI/BHMA Standard
A156.4 and ASTM B117.
2. All closers detailed with plated finishes shall include plated
covers (or finish plates), arms, and visible fasteners.
3. All electromechanical automatic operators supplied
with anodized finishes.
4. All closers must be shipped with a finish.
PART 3 - EXECUTION
3.1 INSTALLATION
A.
General
1. Installation shall be in accordance with the templates and
installation instructions packaged with the closers
at the time of manufacture.
2. Installation shall be made with fasteners packaged with the
closer by the manufacturer.
3. All electrical connections shall be made in accordance with the
manufacturers recommendations.
4. Clean installed closer to remove dirt, debris, and marks
incidental to installation work.
5. Installation instructions and templates are to be turned over to
the Owners representative upon completion of the installation
work.
6. Factory trained representative will be available for job site
inspection of major projects upon .completion of the hardware
installation work.
-Or ll electromechanical automatic operators shall include the
A
following features of functions:
a) Maximum 8-1/2 lbs of manual opening force [9130,
9140, 9150 Series].
b) Maximum 15 lbs of manual opening force [2810, 2850,
2860, 9530, 9540, 9550, 9560 Series].
c) Bottom loaded header for easy access to controls [2810,
2850, 2860, 9550, 9560 Series].
d) Power Boost, which adds an additional 25 lbs of closing
force at latch [2810, 2850, 2860, 9130, 9140, 9150,
9530, 9540, 9550, 9560 Series].
e) Self contained automatic operators in a cast aluminum
housing and a forged steel arm [2810, 2850, 2860,
9130, 9140, 9150, 9530, 9540, 9550, 9560 Series].
5.
10
3.2 ADJUSTMENT
A.
Adjustment
1. Install and regulate all closers in accordance with the
installation instructions packaged with the closers at the time
of manufacture.
2. If unfamiliar with LCN products furnished, consult factory
representative prior to installation for assistance.
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
General
information
ANSI FUNCTION NUMBER TO LCN PRODUCT
C02021
HINGE SIDE
BRACKET
C02041
TOP JAMB
C02061
4031
4040XP
1250
1260
1450
1460
4010
4050
4510
4031
4040XP
1250
1260
1450
1460
4050
4110
4210
4040XP
4010
4050
4031
4040XP
1250
1260
1450
1460
4020
4050
4031
4040XP
1250
1260
1450
1460
4010
4050
4031
4040XP
1250
1260
1450
1460
4050
4110
4210
4010
4040XP
4050
4031
4040XP
1250
1260
1450
1460
4020
4050
4010
4110
4010
4020
4010TEL
4110TEL
1460T
4010T
4031T
4040XPT
4510T
PARALLEL
C02031
C02051
LC
N
CL
OS
ER
PT
-4
PT A
-4
PT B
-4
PT C
-4
PT D
PT 4F
-4
PT G
-4
PT H
-4
J
AN
S
NU I
MB
ER
C02011
ANSI Standard A156.4-2013
MO
UN
TI
NG
SURFACE MOUNTED
HINGE SIDE HOLD OPEN
PARALLEL HOLD OPEN
C02071
BRACKET HOLD OPEN
C02081
TOP JAMP HOLD OPEN
C02091
C02101
C02111
C02121
C02171
HINGE SIDE FUSIBLE LINK
PARALLEL FUSIBLE LINK
BRACKET FUSIBLE LINK
TOP JAMP FUSIBLE LINK
HINGE SIDE TELEPHONE BOOTH
C02211
HINGE SIDE TRACK
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
n
fax: 800-248-1460
n
www.allegion.com/us
Note: All closers listed in this section are
certified grade 1 = 1,500,000 cycles, PT4A
= 15% adjustable closing force, PT4B =
35% adjustable closing force, PT4C = 50%
adjustable closing force, PT4D = adjustable
hydraulic backcheck, PT4F = delayed action,
PT4G = built-in factory dead stop (Cush-NStop), PT4H = spring power adjustable over
a range of sizes, PT4J = backcheck position
advanced 15 degrees.
X
X
11
LCN Door Control Catalog
phone: 877-671-7011
ANSI cross reference
n
009426 rev. 2/16
General
information
ANSI FUNCTION NUMBER TO LCN PRODUCT
C02221
HINGE SIDE HOLD OPEN TRACK
C02231
STOP FACE TRACK
C02241
STOP FACE HOLD OPEN TRACK
C02251
TOP JAMB TRACK
C02261
TOP JAMB HOLD OPEN TRACK
C02271
C03011
TOP JAMB PUSH SIDE FLUSH
FRAME TRACK
TOP JAMB PUSH SIDE FLUSH
FRAME HOLD OPEN TRACK
HINGE SIDE
C03021
PARALLEL
C03041
C03051
TOP JAMB
HINGE SIDE HOLD OPEN
C03061
PARALLEL HOLD OPEN
C03081
TOP JAMB HOLD OPEN
C02281
Note: All closers listed in this section are
certified grade 1 = 1,500,000 cycles, PT4A
= 15% adjustable closing force, PT4B =
35% adjustable closing force, PT4C = 50%
adjustable closing force, PT4D = adjustable
hydraulic backcheck, PT4F = delayed action,
PT4G = built-in factory dead stop (Cush-NStop), PT4H = spring power adjustable over
a range of sizes, PT4J = backcheck position
advanced 15 degrees.
LC
N
CL
OS
ER
PT
-4
PT A
-4
PT B
-4
PT C
-4
PT D
PT 4F
-4
PT G
-4
PT H
-4
J
AN
NU SI
MB
ER
ANSI cross reference
ANSI Standard A156.4-2013
MO
UN
TI
NG
SURFACE MOUNTED
1460T
4010T
4031T
4040XPT
4031T
4040XPT
4510T
1460T
4031T
4040XPT
4110T
4210T
1460T
4031T
4040XPT
4110T
1460T
4000T
4020T
4031T
4040XPT
1460T
4020T
4031T
4040XPT
4031T
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4031T
X
X
X
X
X
1250
1260
1450
1250
1260
1450
1260
1250
1260
1450
1250
1260
1450
1250
1260
1450
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
ANSI FUNCTION NUMBER TO LCN PRODUCT
Note: All closers listed in this section are
certified grade 1 = 1,500,000 cycles. PT4A
= 15% adjustable closing force, PT4D =
adjustable hydraulic backcheck.
C04011
CONCEALED IN DOOR
C04031
CONCEALED IN DOOR
12
AR
M
REG
HO
STANDARD
HO
LC
N
CL
OS
ER
PT
-4
PT A
-4
D
ANSI Standard A156.4-2013
MO
UN
TI
NG
AN
S
NU I
MB
ER
CONCEALED IN DOOR
3030
3030H
3130
3130H
X
X
X
X
X
X
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
General
information
ANSI FUNCTION NUMBER TO LCN PRODUCT
ANSI Standard A156.4-2013
BUTT HINGE
REG
C05021
PIVOT
REG
C05031
BUTT HINGE
C05041
STANDARD
PIVOT
STANDARD
C05071
PIVOT
STANDARD
C05081
C05091
PIVOT
BUTT HINGE
STANDARD
HO
5010
5030
5010
5030
2010
2030
2210
2210 DPS
2010
2030
2210
2210 DPS
2010
2030
6030
5010
5030
C00011
C00021
C00191
WALL
FLOOR
HINGE SIDE
N/A
N/A
STANDARD
C00231
STOP FACE
STANDARD
C00311
TOP JAMB
REG
C00351
HINGE SIDE
STANDARD
C00371
C00391
HINGE SIDE
TOP JAMB
SF
DE
C00471
C00511
C00611
HINGE SIDE
PUSH SIDE
CONCEALED
REG
REG
STANDARD
C00651
CONCEALED
STANDARD
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
7830, 7840, 7850
7820
4040SE
4040SEL
4040SE
4040SEL
4410HSA
4410ME
4310HSA
4310ME
4310ME
4310HSA
4310ME
4040SEH
4040SEH
3130SE
3130SEL
2310ME
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Note: Options are; PT4D = adjustable
hydraulic backcheck, PT4N = adjustable
spring power, and PT4P = adjustable holdopen intensity.
X
13
LCN Door Control Catalog
phone: 877-671-7011
n
Note: All closers listed in this section are
certified grade 1 = 1,500,000 cycles.
PT8A = door under control from 7 degrees of
maximum door opening to close,
PT8B = hold-open between 85 and 180
degrees, PT8D = 50% adjustable
PT8E = single acting, 165 degrees of opening,
double acting 165 degrees of opening either
way, PT8F = adjustable hydraulic backcheck,
PT8J = delayed action, PT8L = 35%
adjustable closing force.
ANSI Standard A156.15-2001
LC
N
CL
OS
ER
AR
M
MO
UN
TI
NG
AN
S
NU I
MB
ER
ANSI FUNCTION NUMBER TO LCN PRODUCT
LIFE SAFETY CLOSER/
HOLDER RELEASE DEVICE
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
PT
4
PT D
4
PT N
4P
AR
M
C05011
LC
N
CL
OS
ER
PT
-8
PT A
-8
PT B
-8
PT D
-8
PT E
-8
PT F
-8
PT J
-8
L
ANSI cross reference
MO
UN
TI
NG
AN
S
NU I
MB
ER
OVERHEAD CONCEALED
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
General
information
Materials
Made from premier materials, LCN is committed to providing
the best door closers in the world. In addition to the mechanical
advantages derived from proven designs, much of the durability of
the closer and arm system is directly related to the materials used
in their manufacturing.
Forged steel main arms are superior to stamped steel arms used
Precision machined cast iron cylinders and forged steel
pistons work together because of the compatibility of their
basic elements. Heat-treated pinions and pistons spread
the load over a large gear tooth system to better handle the
wear and stress of millions of operating cycles. Upper and lower
full compliment pinion bearings provide the support and load
capacity required by the design of the closer. All weather fluid
eliminates the need for seasonal adjustments.
LCN always uses the best materials available to provide the
exceptional value and long service life that you, our customer,
have every right to expect.
14
on closers where price is the primary concern. Specially designed
shoe and elbow joints provide maintenance free service. A stateof-the-art, powder coat process delivers a high quality, corrosion
resistant finish on all metal parts in popular architectural finishes.
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Today practically every door in modern commercial, industrial, and institutional buildings is
opened by the person passing through and closed by a mechanical door closer which keeps the
door under control at all times. The power to close the door is generated by the springs inside
the closer. Regulated hydraulic circuits control the speed of the doors closing swing. Ideal door
“conduct” is illustrated and described in the diagram below. It can be achieved by equipping each
door with the appropriate LCN door closer.
General
information
Proper door control
Perfect door operation… The aim of mechanical control.
This diagram shows the main part or stages in correct door operation,
whether under manual or mechanical control or a combination of the
two.
(1) On the opening swing, the door closers function is to let
the door open easily, except at the end of the swing
where backcheck is applied.
(2) Backcheck is a feature that cushions the opening swing to prevent
the door from slamming into the stop. Special closers designed for
potentially abusive applications begin the backcheck function much
earlier (2A) such as LCN’s advanced variable backcheck (AVB).
(3) Through the long closing arc, a uniform, reasonable (main) speed
should be maintained.
(4) The latching arc allows the door to close quietly and firmly.
Opening the door builds up the power, which later closes the door.
As a controlled door is opened, the spring of the closer is compressed which builds up the power to close the door. Normally, more opening
force would be required as spring compression increases. However, as an LCN closer changes it’s arm geometry while the door opens, it
increases the door leverage. This offsets the spring compression, resulting in greater ease in opening the door.
In opening, more leverage for the person.
The changing arm geometry gives increased leverage over the door to overcome the growing power of the spring allowing one to pass
through the door easily.
In closing, more leverage for the closer.
When the person releases the door and the closer takes over, spring power is applied through the arm system to close the door. Because
the spring has been compressed, its power is very high. As the door closes the spring expands, providing the power to
close the door.
Special closers for reduced opening force.
The 1990 Americans with Disabilities Act (ADA) and ANSI Standard A117.1 describe maximum opening force limitations for certain non-fire
rated doors. The last page of each closer section in the catalog includes a section titled REDUCED OPENING FORCE CLOSERS. This section
lists closers in that specific series that will comply with a maximum opening force based on the width of the door.
Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed, and adjusted
based on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch the door.
Refer to AUTOMATIC OPERATORS section for information on electric, pneumatic and electromechanical systems that meet
reduced opening force requirements without affecting closer power.
15
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
General
information
Mechanical
considerations
HOW TO SELECT A DOOR CLOSER
CONCEALED OR SURFACE MOUNTED CLOSERS?
Door closers are available in two styles - concealed or surface
mounted. In choosing a closer style for a particular application,
consideration should be given to the type of door being controlled,
frame conditions, aesthetic requirements, and control features
needed. Information contained in the following material can
serve as a guide in selecting the style and model of
closer to meet specific requirements.
SURFACE MOUNTED CLOSERS – LOCATION?
Closer location is subject to the considerations of practicality and
appearance. Good taste usually decrees that closers on doors
along a corridor be located on the room side of the door so they
are out of the line of sight from the corridor. Closers should be
placed on the inside of exterior doors for appearance and to
shelter them from the elements.
HINGE (PULL) SIDE MOUNT
IF CONCEALED, WHERE?
Closers concealed in the head frame over the door are
out of sight and entirely out of the pedestrians way.
They cannot be harmed by scrub water, cleaning chemicals or
floor dirt, and are protected from airborne contaminants, like dust.
They are easy to reach for regulation without removing any parts.
Closers for frame sections as thin as 1-3/4˝ (44 mm) are available.
TOP JAMB (PUSH SIDE) MOUNT
Closers located within the door itself are also hidden and
protected but recommended for interior doors only.
CONCEALED IN FRAME
PARALLEL ARM (PUSH SIDE) MOUNT
CONCEALED IN 1-3/4” TUBE
WHERE ARE HEAVY DUTY CLOSERS REQUIRED?
Heavy duty closers should always be used in these places:
1) Schools or public buildings where heavy or abusive usage is
expected.
2) Exterior doors.
3) Doors subject to draft, winds, or air pressure differentials.
CONCEALED IN DOOR
4) High frequency doors such as those on department stores,
malls, or mixed use tenancies.
16
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
General
information
Mechanical
considerations
WHICH ARM SYSTEM?
Double lever arm closers can provide control under difficult conditions for either interior or exterior doors. A parallel arm system is
a type of double lever arm where the main arm is parallel to the face of the closed door. Available double lever arms:
REGULAR (REG)
FUSIBLE LINK (FL)
HOLD-OPEN (H)
CUSH-N-STOP (CUSH)
HOLD-OPEN
CUSH-N-STOP (HCUSH)
3077CNS
EXTRA DUTY (EDA)
HOLD-OPEN
EXTRA DUTY (HEDA)
SPRING CUSH (SCUSH)
3049CNS
SPRING HOLD-OPEN
CUSH (SHCUSH)
Single lever arm (track) closers may be used on interior or sheltered exterior doors. The hold-open function in a single lever arm
system is provided by either the track or the cylinder assembly. Available single lever arms:
STANDARD (STD)
DOUBLE EGRESS (DE)
SWING-FREE (SF)
STANDARD ADJUSTABLE (STD)
17
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
General
information
Mechanical
considerations
DO YOU NEED SPECIAL CYLINDER FUNCTIONS?
Many LCN closers can be ordered with a delayed action function
built into the cylinder. Delayed action (DEL) is a special hydraulic
circuit that provides additional time to pass through the door. A
special regulating screw controls the closing speed from maxi
mum opening through approximately 75°. After that point the
normal main speed resumes control to close the door. Delayed
action is not available with single lever arm (track) closers.
Advanced Variable Backcheck (AVB) is available
with high security and 4110 series closers to begin cushioning the
opening swing at about 45° (2A) instead of the usual 75° (2).
AVB is especially suited for potentially abusive applications.
IS SEASONAL ADJUSTMENT REQUIRED?
Temperature changes can affect the operation of common door
closers by changing the viscosity of the hydraulic fluid inside the
closer. As temperature rises, the fluid thins out and closes the door
more rapidly. As temperatures decrease, the fluid thickens causing
the closer to close the door very slowly.
LCN uses all weather Ultra X fluid to eliminate the need for
seasonal adjustment.
HOW WILL THE DOORS BE HUNG?
While butt hinges provide the most common method
of hanging doors, some doors are hung on pivots centered in the
door, others on offset pivots. Surface mounted closers will handle
doors hung in any of these three
ways. LCN 4020 Series closers can even control a “balanced” door
installation. Concealed closers may conflict in location with pivot
leaves and thus may
require special templating.
HOW FAR SHOULD THE DOOR OPEN?
Three basic rules apply to maximum degree of opening.
1. It is best to let the door swing as far as it can swing freely.
Some closers are mounted in different locations for different
degrees of opening.
2. Use a mechanical stop when a door can not swing 180° or at
the selected hold-open point of a double lever arm system.
The mechanical stop can be mounted on the floor, wall,
overhead, or built into the closer arm.
Multi-point (ME series) closer/holders can be ordered with a
hold-open bypass at either 80° or 140° function. This feature
does not allow hold-open to take effect until opened beyond the
selected degree of bypass.
18
3. The closer should be positioned so backcheck takes place well
in advance of the stop position to cushion the opening swing
and prevent door and frame damage from an abrupt stop.
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
General
information
Mechanical
considerations
DOOR DIMENSIONS?
The width of the door is the main consideration in determining
the correct closer size. Size here refers to the minimum spring
power and hence the closing force, generated by the closer. In
the catalog, the interior and exterior TABLE OF SIZES for each
closer are set up for ranges of door width and assume normal
operating conditions. If a door is of exceptional height, weight,
special construction, or if drafts and air pressure differentials exist,
increased closer power should be considered.
Door thickness may be a factor. A concealed-in-the-door closer
should not be used in a hollow metal door less than 1-1/2˝ (38
mm) thick or a wood door under 1-3/4˝ (44 mm). Exceptionally
thick doors can affect hinge and pivot centers to the extent that
closer functions and geometry are also affected.
The depth of the doors top rail is important to nearly every closer
installation. Narrow top rails may require plates to successfully
mount the closer. An insufficient top rail in flush, hollow, or
composite filled doors may make concealed-in-the-door
installations impractical.
DOOR TOP RAIL
HAND OF A DOOR?
Some door closers are handed. When approaching a door from
the push side, if hinged on the left, it is a left hand door; if hinged
on the right, it is a right hand door.
For purposes of handing door closers, right hand reverse bevel and
left hand are identical. Also, left hand reverse bevel and right hand
are identical.
WILL A STANDARD CLOSER AND TEMPLATE MEET
YOUR NEEDS?
Occasionally the physical limitations of the selected closer may
not provide the desired functions or degree of opening. Standard
templated locations may interfere with other applied hardware.
In these situations, contact the LCN Applications Engineering
Department for assistance. Customized installation templates or
products may be available to solve an unusual application.
19
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
General
information
Mechanical
considerations
WHY USE PLATES, BRACKETS, ADAPTERS AND OTHER
SPECIAL PIECES?
A drop plate is now commonly used to drop (lower) closers
to meet special conditions or adapt a closer to door or frame
surfaces that are not adequate for normal mounting patterns.
WHAT FASTENERS SHOULD BE USED?
LCN closers are shipped with a wood and machine screw pack or
Self-Reaming and Tapping screws (SRT) unless other fasteners
are ordered. These screw packs are suitable for wood or properly
reinforced hollow metal frames and metal or solid core wood
doors. For wood door applications, LCN recommends the use of
wood screws. For selected closers, metric machine screws are
available in lieu of UNC/UNF machine screws.
DROP PLATE
Specialized brackets, adapters, and parallel arm shoes are
available to simplify the installation of closers with a variety of
frame and door conditions. The most commonly used are listed
with each closer. Consult LCN for assistance if you are not sure.
CUSH SHOE SUPPORT
When attaching closers to hollow core doors, optional THRU
BOLTS (TB) are recommended to minimize crushing or squeezing
the door. Thru bolting can also provide a very strong mechanical
connection for potentially abusive applications. Because the TB
barrel extends completely through the door, the door thickness
must be specified when ordering if it is other than 1-3/4˝ (44 mm).
TB’s are only available for 1/4-20 machine screws.
For high security applications, TORX machine screws are available
with most closers. These are standard for all exposed fasteners
with high security closers. TORX fasteners feature a hex lobular
drive with a security pin in the center. They can only be installed or
removed with a special set of bits that are available from LCN.
BLADE STOP SPACER
TORX
EDA ARM
20
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
General
information
Mechanical
considerations
WHAT FINISH IS DESIRED?
LCN powder coating provides superior protection against the
effects of weather conditions and is an environmentally friendly
process. The high quality, chip resistant finish is far superior to any
previously offered. Corrosion resistance surpasses 100 hours salt
spray testing (four times the industry standard). Non-metallic
components also provide the same high resistance to the effects
of the elements. All LCN products must be shipped with a finish.
INSTALLATION PROCESS?
Before installation of the door closer;
n Review the installation instructions provided with the
door closer.
n Verify the desired installation and template with the
hardware schedule. Review other applied door hardware
for possible interference.
n Verify that the frame attachments and door hinges or
pivots are securely installed.
n Verify that the door is hung properly and operates
smoothly through it’s entire range of opening.
Misalignment, sagging or other conditions that prevent
free movement of the door must be corrected prior to
installation of the door closer.
LCN recommends < 1/4 lbf to open the door before
installing closers for ADA applications.
n Check latching mechanisms for proper operation
and release.
n Verify that the door and frame have specified
reinforcements.
n Verify that all required tools are available.
LCN offers custom finishing services to complement special
installations. This provides a custom appearance and all the
corrosion resistance inherent in the standard powder coated
finishes. It is recommended that the customer submit a physical
sample of desired custom finish with the closer order. Custom
powder coat finishes are available at additional cost. A metal
cover must be ordered when custom powder coat finishes are
desired.
With some exceptions, visible components such as covers, arms,
fasteners, and finish plates are available in plated finishes. Tracks
are painted to complement the plated finish. Hidden assemblies
such as cylinders and mounting plates are supplied with a powder
coated finish. Plated finishes are available at additional cost.
For installations where a higher level of protection against
weathering is required, LCN offers a special rust inhibiting (SRI)
process at an additional cost. Metal components receive an SRI
pretreatment and a standard or custom powder coat finish. The
SRI process with a powder coat finish exceeds the protection level
available with powder coated parts. SRI can not be ordered with
plated or anodized finishes. All closers must be shipped with a
finish.
Complete the installation by;
n Follow the installation instructions and use fasteners
provided with the closer.
n Using the template provided with the closer, layout, drill
and tap (for metal screws) the required mounting holes.
Be sure to use the proper size drill bit and tap to ensure
maximum holding power by the screws.
n For closers with adjustable spring power, adjust the
cylinder spring power based on the width of the door as
described in the installation instructions.
n The hydraulic back check, main speed and latch speed
regulation adjustments of the door closer have been
adjusted at the factory to meet normal installation
conditions. If further adjustments are required to the
hydraulic regulation, follow the directions included with
the installation instructions.
n Lightly wipe the cover and arm surfaces with a soft, clean,
dry cloth to remove any dirt or smudges that occurred
during the installation.
21
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
General
information
Glossary of
abbreviations
Arm Options
STD
- Standard Arm
REG
- Regular Arm
Rw/PA
- Regular Arm with Parallel Arm Shoe
R/62A
- Regular Arm with Auxiliary Parallel
Arm Shoe
H
- Hold Open Arm
Hw/PA
- Hold Open Arm with Parallel Arm Shoe
LONG
- Long Arm
XLONG
- Extra Long Arm
HLONG
- Hold Open Long Arm
EDA
- Extra Duty Arm
EDAw/62G
- Extra Duty Arm with Thick Hub Shoe
HEDA
- Hold Open Extra Duty Arm
HEDAw/62G
- Hold Open Extra Duty Arm
w/ Thick Hub Shoe
CUSH
- Cush -n- Stop Arm
HCUSH
- Hold Open Cush -n- Stop Arm
SCUSH(SCNS)
- Spring Cush -n- Stop Arm
SHCUSH(SHCNS) - Spring Hold Open
Cush -n- Stop Arm
SF
- Swing Free Arm
DE
- Double Egress Arm
FL
- Fusible Link Arm
Control Box Options
SC
- Standard Control Box
Cylinder Options
STD
- Standard Cylinder
DEL(DA)
- Delayed Action Cylinder
AVB
- Advanced Variable Backcheck
B80
- Bypass 80 Degree ME Cylinder
B140
- Bypass 140 Degree ME Cylinder
TEL
- Telephone Cylinder
Cover Option
STD
MC
FC
CL
DS1
- Standard Plastic Cover
- Metal Cover
- Full Cover
- Cover Length
- Designer Series Cover
Track Options
STD
HO
BUMPER
HBUMPER
- Standard Track
- Hold Open Track
- Track with Bumper
- Hold Open Track with Bumper
22
Fastener Pack Options
WMS
- Wood & Machine Screws
TBWMS
- Thru-Bolt, Wood & Machine Screws
SRT
- Self Reaming & Tapping Screws
TBSRT
- Thru-Bolt, Self Reaming & Tapping Screws
TORX
- ‘TORX’ Machine Screws
TBTRX
- Thru-Bolt, ‘TORX’ Machine Screws
UNIV
- Universal Screw Pack
Motor Gearbox Options
SF
- Standard Force Motor Gearbox
Powder Coat Finishes
AL
- Aluminum
DKBRZ
- Dark Bronze
STAT
- Statuary Bronze
LTBRZ
- Light Bronze
BLK
- Black
BRASS
- Brass
Miscellaneous Terms
ELR
- Extra Long Rod
SRI
- Special Rust Inhibitor
SE
- Single Point Electronic
ME
- Multi-Point Electronic
PAH
- Parallel Arm Holder
HSA
- Hold Open / Scanner Activated
ES
- Electric Strike Relay (Control Boxes)
S
- Sequential (Control Boxes)
RF
- Radio Frequency
TJ
- Top Jamb
PA
- Parallel Arm
G
- Flush Ceiling
T
- Track
DPS
- Door Position Switch
- Long Rod
LR
ST
- Special Template
RH
- Right Hand
LH
- Left Hand
HL
- Header Length
DD
- Double Door Header
POS
- Positive Mechanical Stop
BKY
- Panic Breakaway Stop
XP
- Extra Protection
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
General
information
FRAME DEPTH
FRAME
FACE
Glossary of terms
FRAME
FACE
RABBET
RABBET
A-B
STOP
HEIGHT
Pull
side
HINGE
SIDE
FRAME
REVEAL
Push
side
STOP
TOP RAIL
OF DOOR
SOFFIT
HINGE
REVEAL
PANEL OR
GLASS LITE
DOOR THICKNESS
A
ADA – Americans with Disabilities Act.
ARCH TOP DOOR – Any door with an arched top rail.
ADVANCED VARIABLE BACKCHECK CYLINDER (AVB) – Optional
cylinder that starts backcheck at about 45° (2A) instead of the normal
75°(2).
ARMATURE EXTENSION – Standard metal extensions available for
SEM magnets where the armature does not reach the magnet. Available
in 1/2", 3/4", 1", 2", 4" or a kit including all sizes.
AUTOEQUALIZER™ – An LCN specific term for an electric or a
pneumatic power operator. System is low-energy & carries a two-year
warranty.
AVB CYLINDER
AUTOMATIC OPERATOR – A term used to describe a type of
automated opening system.
AUXILIARY DOOR STOP – Hardware designed and installed to limit
the swing of a door.
B
BACKCHECK – Hydraulic circuit designed to cushion the doors opening
swing at about 75°. Standard on all LCN closers.
BACKCHECK
ANODIZED – An electrochemical process that thickens and toughens
the protective oxide on aluminum metal.
ANSI – American National Standards Institute publishes standards for
commercial hardware. A156.4 is the basic door closer standard.
SOFTER
APPLIED STOP – Surface mounted stop attached to a cased opening
frame.
INCREASE
23
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
BACKCHECK
REGULATING SCREW
www.allegion.com/us
n
009426 rev. 2/16
General
information
Glossary of terms
BACKCHECK SELECTOR VALVE – Valve used to provide
proper backcheck location for 4040XP and 4050 parallel arm
mounting.
B-C
CLOSING FORCE – Energy generated by a closer to close and
latch the door.
CONTROL BOX, Standard, 9100 SERIES – Microprocessor door
control without Power Boost or built in power supply.
BACKCHECK SELECTOR VALVE
CONTROL BOX, 2800, 9500 SERIES – Microprocessor door
control, includes adjustment for opening, closing & backcheck
speeds. Features Push ‘N Go & Power Boost.
4040XP shown
Turn in clockwise for PA mount.
CONTROL BOX, 7900 SERIES – Heavy duty, surface mounted
control box that contains one or two electrically controlled
pneumatic circuits.
BLADE STOP – Narrow frame stop that will not accept a
parallel arm shoe.
CONTROLLER ASSEMBLY – Digital control suite used in the LCN
electric power operator. Includes adjustments for opening force
and opening speed.
BLADE STOP SPACER – Spacer lowers a parallel arm 1/2˝ so
the arm will clear a blade stop.
CONCEALED IN DOOR – Closer with cylinder concealed in the
top rail of the door with either an exposed or concealed arm.
BLADE STOP SPACER
CUSH SHOE SUPPORT – Support provides fifth screw
anchorage of CUSH shoes on frames with narrow push side
reveals.
41
40
1
1
03
CUSH SHOE SUPPORT
BLOW-OPEN – A type of control box that is used for a smoke
evacuation system. Can be used with or without a normal
power operator system.
BRIGHT METALLIC – Custom powder coat finish, which
resembles that of US26 or US26D plated finish.
BYPASS CYLINDER – ME
cylinder that will not hold-open
SIDE
within a specified range of door swing.
CUSH-N-STOP ARMS (CUSH) – Extra duty, parallel arm that
includes a stop in the CUSH shoe.
CUSH-N-STOP ARM
80° BYPASS CYLINDER
ILLUSTRATED
C
CAST ALUMINUM – Material used in producing LCN’s
competitively priced door closers.
CUSTOM POWDER COAT (RAL) – An optional powder coat
finish. Currently, LCN offers a wide selection for special powder
coat finishes. LCN uses a European color standard, referred to as
an RAL #, to differentiate between finishes.
CAST IRON – Material used in producing high quality door
closers.
CUTOUT – Preparation of the top rail of a door or frame for
concealment of the closer, arm or track.
CASED OPENING – Frame section without stops.
CLEARANCE – Distance from a PA SHOE to the push side of
door or distance from the pull side of door to the wall on 90°
installations.
CLEARANCE
DOOR
WALL
24
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
General
information
CYLINDER ASSEMBLY – Main closer component complete
with any mounting plates or electronics.
CYLINDER ASSEMBLY
DOUBLE LEVER ARM – Two-part arm hinged at the elbow
that provides superior leverage. Used on hinge side, top jamb
and parallel arm mountings, the geometry of the arm provides
greater mechanical advantage to the closer.
Glossary of terms
D-E
DOUBLE LEVER ARM
CYLINDER ONLY – Hydraulic cast iron cylinder.
DOUBLE RABBET FRAME – Frame with a recess or offset
formed on both sides of a stop to receive a door.
D
DEEP REVEAL – Reveal deeper than what an arm will
accommodate.
DOUBLE RABBET FRAME
DELAYED ACTION (DEL) – Delays closing from maximum
opening to approximately 75°.
DELAYED ACTION
DROP PLATE – Designed to mount a closer on top rail or
head frame to meet special conditions or mounting surface
dimensions that are below minimums.
41
E
40
DESIGNER SERIES COVER (DS1) – An aesthetically
pleasing cover design that appeals to many types of facilities &
architects.
ELECTRIC STRIKE – An optional, electronic latching device
that replaces a regular lock strike in a doorframe that allows
the door to open from a remote location or by special access
equipment.
DOOR POSITION SWITCH (DPS) – A security option specific
to the 2210 Series closer. A door position switch is used to
monitor the closed position of a door in an opening.
ELECTRIC STRIKE RELAY (ES) – An optional feature found
in an LCN 7900 Series control box that can be used to control
an electric strike.
DOUBLE DOOR HEADER – One automatic electromechanical
power operator and one manual door within the same header,
for a pair of doors.
ELECTROHYDRAULIC POWER OPERATOR – Power
operator with an electrically controlled opening feature and
hydraulic closing feature.
DOUBLE ACTING – Term used to describe door swing.
A double acting frame does not have a stop thus allowing
the door to swing 95° in both directions.
ELECTROMECHANICAL POWER OPERATOR – Power
operator with an electrically
SIDE controlled opening feature and
closing feature.
DOUBLE EGRESS ARM (DE) – Designed for pull side
installation on double egress frames. Actual arm varies
depending on selected closer.
ESCUTCHEON – An optional, protective or decorative plate
that can be installed with many surface mounted actuators.
1
1
03
DOUBLE EGRESS ARM
25
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
General
information
Glossary of terms
E-H
FLUSH PANEL ADAPTER – Adapter provides PA shoe mounting
surface when door and frame are flush.
EXTRA DUTY ARM (EDA) – Double lever arm with both main
and forearm made of solid forged steel for extra strength.
FLUSH
PANEL
ADAPTER
EXTRA-DUTY ARM
FOREARM – Arm part that connects main arm to the shoe
attachments in a double lever arm system.
EXTRA LONG ARM (XLONG) – 4040XP Series double lever
arm for exceptionally deep reveals or other special applications.
F
FRAME DEPTH – Face to face dimension of the frame.
FRAME FACE – Exposed part of frame parallel to face of
the wall.
(LCN ) FAST POWER ADJUST – A green dial located on the
end of the spring tube on selected heavy duty closers. Designed
to help installers accurately adjust the closer power to match
the conditions of the entrance.
®
™
FRAME FACE
LCN® FAST™ POWER ADJUST
FULL COMPLIMENT BEARINGS – Low friction, high load needle
bearings found in all LCN closers.
FIFTH SCREW – Mounting screw farthest from the door on a
parallel arm shoe.
FULL COVER (FC) – Cover that encloses cylinder assembly
except for shaft/arm attachment.
FIFTH SCREW SPACER – Supports PA shoe mounted on
frame stop.
FUSIBLE LINK ARM (FL) – Releases hold-open function when
exposed to high temperatures. 135°F and 165°F available.
FINISH PLATE – Decorative plate applied to overhead
concealed closer to conceal closer mounting plate and screws.
FUSIBLE LINK ARM
FIRE SHIELD – 22-gage steel liner mounts in the track mortise
of the door’s top rail for 20 minute labeled wood doors.
FLUSH CEILING – Condition when the ceiling is at the same
height as the top of the frame.
FLUSH CEILING
H
HAND – Direction of a doors’ swing, either right or left.
HAND
HANDED – Closer or part designed for ONLY right or left
swinging doors.
HEAD FRAME – Member of the frame above the door.
26
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
General
information
Glossary of terms
J
HEADER – Aluminum enclosure for motor gearbox &
controller.
HINGE SIDE – Face of door and frame on which the hinge
pivot point is located.
HINGE SIDE MOUNT – Mounting with the closer cylinder on
the hinge side of the door top rail.
HINGE (PULL)
SIDE MOUNT
JAMB – The vertical member that forms the sides of a door
frame. There is a hinge side jamb and a strike side jamb.
H- M
L
LABELED DOOR – Conforms to all applicable codes,
requirements, and procedures governing fire rated doors and
bears the manufacturer’s identification label.
LATCH SPEED – Separate adjustment to control the last few
degrees of the door’s closing swing.
LATCH SPEED
LATCH SPEED REGULATION
HINGE SIDE REVEAL – Depth measured from the frame face
to the pull side of the door face.
HINGE SIDE REVEAL
LOCK STILE – Vertical member of a door prepared for
installation of a lock.
LONG ARM (LONG) – Extended arm for deep reveals or other
special applications.
HINGE STILE – Vertical member of a door prepared for
installation of hinges.
LOW ENERGY OPERATOR – A type of automated opener
used on a door that should take approximately 5 seconds to
open to 90°. Low Energy operators do not require safety devices
or guide rails. Conforms to ANSI A156.19.
HOLD-OPEN ARM (H) – Double lever arm that provides holdopen function that is either adjustable at elbow or shoe.
M
HOLD-OPEN CLIP – Located in track to provide hold-open
function for single lever arms.
HOLD-OPEN CUSH (HCUSH) – Parallel arm that features
solid forged steel main arm and forearm with stop in soffit
shoe. Uses control handle to select hold-open function.
MAIN ARM – Connects to the cylinder in a double lever arm
system.
MAIN SPEED – Separate adjustment to control closing swing
of the door to within a few degrees of latch.
MAIN SPEED
MAIN SPEED REGULATION
HOLD-OPEN LONG ARM (HLONG) – Hold-open arm
extended by a long head and tube for deep reveals.
HOLD-OPEN TRACK with BUMPER (HBUMPER) –
Track with hold-open clip and bumper assembly installed.
HOLDER SCANNER-ACTIVATED (HSA) – Electrically
controlled closer/holder with built-in scanner.
HYDRAULIC FLUID – Fluid metered by valve system to control
door.
I
INDEPENDENT PAIR – Two automatic doors that function
separately.
MAXIMUM OPENING – Furthest degree of door opening.
METAL COVER (MC) – Stamped metal cover required for
optional plated finishes and custom powder coat finishes.
Standard cover with High Security Series closers.
MOTOR CLUTCH – The geared assembly in an LCN electric
power operator. Once activated, the motor clutch drives the
door open.
MOTOR GEARBOX – Electromechanical drive unit.
27
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
General
information
Glossary of terms
M-P
MORTISE – Material removed from frame and/or top rail
of door.
PANIC BREAKAWAY STOP – An optional safety device that
permits egress on in-swinging exterior doors by allowing them to
swing out in case of an emergency. Used with overhead concealed,
center pivoted in-swinging doors.
MOUNTING/FINISH PLATE – Plate with exposed mounting
screws and finish applied.
PARALLEL ARM – A push side mounted double lever arm
system where main arm is parallel to the door when in the closed
position.
MULTI-POINT HOLD-OPEN (ME) – Infinite hold-open points
from 0° up to maximum opening.
N
PARALLEL ARM MOUNT
NO DESTRUCT FEATURE – A feature specific to the motor
clutch assembly portion of an LCN electric power operator. This
feature does not allow the user to back drive the motor, which
could cause damage to the unit.
NON-HANDED – Closer or part designed for both right and left
hand swinging doors.
NON-SIZED – Cylinder assembly with spring power adjustable
over a range of sizes.
PARALLEL ARM HOLDER (PAH) – An item usually used on the
inactive leaf of a pair of doors for hold-open where the active leaf
has a closer installed.
O
OPENING FORCE – Force required to open the door against
the closers spring power.
PINION – Transfers rotary motion of the arm system to the
piston. Also provides attachment of arms to closer.
OVERHEAD CONCEALED – Closer with cylinder concealed in
head frame and either a concealed or exposed arm.
PISTON – One of the internal pieces of a door closer. The piston is
moved by the rotating pinion, which in turn compresses the spring.
P
POSITIVE MECHANICAL STOP – Door stop for overhead
concealed, center pivoted out swinging doors.
PA SHOE ADAPTER – Adapter provides horizontal mounting
for PA shoe on a flush door and frame.
PNEUMATIC – This type of LCN Automatic Operator is driven by
an air source. The air source can be built into the control box or
provided separately within the building.
PA SHOE
ADAPTER
POWER BOOST – Provides additional closing force to ensure
latching.
POWER OPERATOR – A term used to describe a type of
automated opening system. Refer to “Automatic Operators”.
POWDER COAT – A standard finishing process that provides
a very durable, corrosion resistant covering to the majority of
products that LCN offers. An LCN powder coat finish offers over
four times the ANSI salt spray test of 25 hours.
41
40
PA SHOE – Attaches the forearm to the soffit for a parallel
arm system.
1
1
03
PULL SIDE – Hinge side of door.
PACKING NUT – A threaded part that holds the pinion in
place. Usually, the LCN model number and date of manufacture
are stamped into this part. The date of manufacture is
important because the owner can determine if the cylinder is in
or out of warranty.
PULL SIDE/
PUSH SIDE
PACKING NUT
SIDE
41
40
Model#
Year Manufactured
Shift Made
1
1
03
Week of the
Year Manufactured
28
LCN Door Control Catalog
phone: 877-671-7011
SIDE
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
41
40
1
1
03
General
information
SELF-REAMING and TAPPING SCREW (SRT) – Philips
head screw with self-reaming and self-tapping capability used
in mounting installations.
PUSH ‘N GO – Provides power opening after partial (5°)
manual opening of door.
Q
SIDE™ – Retrofit mounting plate for the
QUICK FIX PLATE
LCN 1260 closer used for closer replacement in push/pull
applications.
RABBET – Recess or offset formed in the face to receive
a door.
1
04
4
RADIO FREQUENCY (RF) – A method of actuating LCN
Automatic Operators. A RF transmitter signals a RF receiver to
open a door.
1
P-S
SELF-REAMING and TAPPING SCREW
R
1
Glossary of terms
S
PUSH SIDE – Face of door on stop side of frame.
03
REGULAR ARM – A double lever, non hold-open arm.
SECOND CHANCE FEATURE – A feature that allows the
Automatic Operator two attempts at opening the door. If
resistance is encountered on the first attempt, the operator will
pause and then try a second time. This feature is standard on
the LCN electric automatic operators.
SEM – SEM is short for ‘single-point electronic magnet’.
An actual product number is required when ordering.
SENTRONIC – A general term for the fire/life safety products
that are offered by LCN.
REGULAR ARM
SEQUENCE – An option to the LCN series of automatic
operators. This option allows a pair of vestibule doors to open
one after the other.
REGULATING SCREW – Valve that adjusts flow of hydraulic
fluidSIDE
within cylinder to control door closing speed.
REGULATING
SCREW
DELAY REGULATING
SCREW
SHOE – Attaches forearm to frame or door face in a double
lever arm system.
SIMULTANEOUS PAIR – Two automatic doors that open at
the same time.
SINGLE POINT HOLD-OPEN (SE) – Electrically controlled
hold-open using a special track and single lever arm.
SINGLE LEVER (STANDARD) ARM (STD) – Directly
connects cylinder and track/roller assembly on the door or
frame.
REVEAL – Depth measured from the frame face to the
door face.
SINGLE LEVER ARM
REVEAL
SINGLE RABBET FRAME – Frame with a recess or offset
formed on one side of a stop to receive a door.
ROD & SHOE – Part of forearm that provides adjustable
length feature for double lever arms.
SINGLE RABBET
ROD & SHOE
SIZED – A closer with a specific closer power for proper door
applications.
SLIDER – This part is used in conjunction with a track roller in a
Sentronic track assembly.
29
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
General
information
Glossary of terms
S-T
SLIM LINE COVER – A over that conceals the cylinder but
exposes both pinion shafts.
STOP – Part of frame against which the door closes.
STOP HEIGHT – Distance the stop extends below the
frame face.
SOFFIT – Horizontal surface of a frame between vertical stops
on a double rabbet frame.
STOP HEIGHT
SOFFIT SHOE – Connects parallel arm shoe to soffit.
SPECIAL RUST INHIBITOR (SRI) – A special corrosion
resistant pre-treatment that is available for most LCN closers.
Adding SRI to the standard LCN powder coat finish gives the
closer a tremendous advantage over a potentially corrosive
environment.
STOP
SPECIAL TEMPLATE (ST) – A special template is usually a
modification to a standard product. Either the product itself
changes location in the opening or a component is modified
from the standard offering to accommodate other hardware or
door and frame dimensions.
SWING FREE ARM – ME arm designed to allow free movement
of the door without disengaging the holding mechanism.
SWING FREE ARM
SPRING CUSH ARM (SCUSH) – Non-handed parallel arm for
abusive applications. Features solid forged steel main arm and
forearm with spring loaded stop in the soffit shoe.
SPRING HOLD-OPEN CUSH ARM (SHCUSH) – Non-handed
parallel arm for abusive applications features solid forged steel
main arm and forearm with spring loaded stop in the soffit
shoe. Uses control handle to select hold-open function.
T
SPRING POWER – Closing force exerted by the spring inside
the cylinder to close the door.
TBSRT – Thru bolts and self-reaming and tapping screw
package.
SPRING POWER ADJUSTMENT – Mechanical pre-loading of
spring to adjust closing force.
TBTRX – Thru bolts and TORX security machine screw package.
TBWMS – Thru bolt, wood and machine screw package.
SPRING POWER
ADJUSTMENT
THICK HUB SHOE – Substituted for soffit shoe on EDA arm to
clear blade stop.
TOP JAMB – Mounting with closer installed on frame face.
TOP JAMB
(PUSH SIDE)
MOUNT
SPRING TUBE – Part of the closer assembly that contains
the spring.
STANDARD CYLINDER – Cylinder with main speed, latch
speed, and backcheck adjustments.
STANDARD TRACK – Non hold-open track.
TOP RAIL – Horizontal top member of a door that connects the
latch and hinge stiles. Height is measured from stop on push side.
STANDARD TRACK
TOP RAIL
30
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
General
information
Glossary of terms
TORX – Security machine screw with TORX drive and security
pin for tamper resistant applications.
TORX
T-W
TRACK BUMPER – Mounts in track to cushion opening swing,
but reduces maximum opening. This is not a substitute for a
mechanical door stop.
TRACK BUMPER
TRANSFORMER – Electrical device to reduce voltage from
120V AC to 24V AC.
TRANSFORMER
TRI-VOLTAGE – SEM magnets available with current inputs of
12v, 24v and 120v.
U
ULTRA LIQUID X – All weather fluid that does not change
viscosity over a wide temperature range.
UNIVERSAL – A term used to describe a door closer. Closers of
this nature are non-sized and non-handed.
V
VESTIBULE – A small lobby or entrance that has at least two
doors. One door is to the exterior and the other to the interior
of the building. A variation could be multiple doors or banks of
doors.
W
WMS – Standard wood and machine screw package.
WOOD MOUNTING CLIP – Designed to ease installation of
concealed closer in wood frame.
31
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
32
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Product selection guide
Surface mounted 4000 Series LCN closers feature a modern design engineered for each application, easy installation,
and superior performance. This guide is based on the desired mounting of the closer.
4000 Series
surface
mounted
closers
EXTERIOR DOOR
PUSH SIDE
MOUNTED
PULL SIDE
MOUNTED
double
Lever Arm
double
Lever Arm
4020 4040XP
4110 4210*
4050
4010 4040XP
4510* 4050
PUSH SIDE
MOUNTED
PULL SIDE
MOUNTED
INTERIOR DOOR
double
Lever Arm
SINGLE
Lever Arm
double
Lever Arm
SINGLE
Lever Arm
4010 4040XP
4020 4210*
4110 4050
4030
4110T 4040XPT
4210T* 4050T
4020
4030
4040XP 4510*
4050
4010
4000T 4010T
4020T 4510T*
4040XPT 4030T
4050T
* INDICATES HIGH SECURITY CLOSER. REFER TO THAT SECTION OF THE CATALOG.
Product comparison
This chart shows a basic comparison of 4000 Series closers. Refer to the specific closer chapter for complete details.
*ARM FUNCTION
**
*
RE
GU
LA
ST
R
AN (DO
DA UB
HO RD LE)
LD (SIN
G
FU OPE LE)
N
SI
BL
ED E L
IN
A/
K
H
CU EDA
SH
/
SC HCU
US SH
H/
DO SH
UB CU
LE SH
EG
RE
SS
CYLINDER
NHA
N
N- DED
S
AC IZE
CE D
S
DE SIB
LA ILI
TY
Y
AV ED
B* AC
T
*
IO
N
NO
AS
TI
C
ET
AL
PL
M
HI
NG
E(
TO PUL
L
P
JA ) SID
TO MB E
P
JA (PU
PA MB LL)
RA
(P
U
L
ST LEL SH
)
OP A
R
FA M
CE
PO
W
D
PL ER C
AT
O
ED AT
CLOSER
SERIES
4010
COVER
FINISH
NO
MOUNTING
140° 140°
140°
180° 120°
4010T
180°
4020
100°
140° 140°
180° 100°
4020T
180°
4030
180°
110° 100° 100°
180° 180°
4030T
120°
4040XP
120°
180° 110° 110°
120° 110°
4040XPT
180°
4050
4050T
180°
95°
180° 110° 110°
180° 180°
95°
180° 180° 180° 110° 110°
4110
4110T
110° 100°
4000T
90°
AVAILABLE
NOT AVAILABLE
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* M
aximum opening/hold-open point with standard template. See individual closer series for
degrees of opening per installation.
** Advanced Variable Backcheck.
*** Delay Action for 4040XP incorporates standard 4041 cylinder.
1
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4000 Series
mounted closers
APPLICATIONS
n
n
n
FINISHES
For aluminum, hollow metal, or wood swinging doors and frames.
Can be used with hinge or pivot mounted door.
dapter plates and other installation accessories available for
A
unusual conditions.
n A
vailable in six standard or optional custom powder
coat finishes to blend with door and frame.
n L
CN’s powder coat finishes surpass 100 hours of salt spray which
is over four times the ANSI standard for corrosion resistance.
n F
or installations where a higher level of corrosive resistance is
FEATURES COMMON TO 4000 SERIES
n E
ach closer (except 4050, 4050T, 4040XP, 4040XPT, 4030, 4030T)
n
n
n
n
n
n
n
n
n
is designed for a specific mounting; hinge side, top jamb, or parallel
arm. 4040XP closer with regular or hold-open arm mounts hinge side
or top jamb. 4030, 4040XP and 4050 regular parallel arm closers
include 62PA SHOE required to parallel arm mount either regular or
hold-open arm.
Handed for right or left swinging doors, except for 4000T, 4030,
4030T, 4040XP, 4050, 4050T and 4040XPT.
Closers to meet ADA reduced opening force requirements
except 4000T.
Adjustable hydraulic backcheck cushions opening swing prior to 90°.
Separate regulation of general closing speed and latching speed.
Joints in regular arm and shoe adapt to uneven trim.
Reversible shoe to boost latching power on double lever arms.
Available in a wide range of standard or optional custom powder
coat finishes to blend with door and frame.
Plated finishes available to accent door and frame.
Not designed for exterior mounting or exposed to elements.
n
required, LCN offers an optional special rust inhibiting (SRI) pretreatment. Closers that combine the exclusive LCN powder coat finish
and the SRI pre-treatment exceed the ANSI standard for corrosion
resistance even further.
lated finishes are available as an option to accent door and frame.
P
(SRI not available with plated finishes).
LISTINGS & APPROVALS
UL listed for self-closing doors without hold-open under “SWINGING DOOR
CLOSERS”(GVEV) file R1943.
Tested and certified under ANSI Standard A156.4 Grade One. Consult
factory for details.
Consult factory for other listings such as; cUL, California State Fire Marshal,
Bureau of Standards and Appeals.
POSITIVE PRESSURE
LCN closers have been certified for three hours by UL to be in compliance
with UL 10C. Contact LCN for specific details on door closer fire ratings.
FASTENERS
4010, 4010T, 4020, 4020T, 4040XP, 4040XPT, 4050, 4050T, 4110, 4110T
Series closers are shipped with: A standard SELF-REAMING and TAPPING
SCREW (SRT) pack that contains Philips head SRT screws to install the
closer. 4000T series closers are shipped with: A standard WOOD and
MACHINE SCREW (WMS) pack that contains Philips head wood and
machine screws to install the closer. 4030, 4030T series closers are shipped
with: A standard WOOD and SELF-TAPPING MACHINE SCREW (WMS)
pack that contains Phillips head wood and self-tapping machine screws to
install the closer.Standard LCN thru bolts (TB) can be installed on 1-3/4˝
(44 mm) thick doors with 1/4-20 machine screws. Optional thru bolt (TB)
sizes are available for 1-5/8˝ (41 mm) or 1-3/8˝ (35 mm) door thickness,
but this must be specified when ordering.
DESIGN ASSISTANCE
LCN has been providing reliable solutions to unique door control
problems since 1925. Design and specification assistance are
only a phone call away.
Contact LCN for assistance or technical information at 877-671-7011
or FAX 800-248-1460 (Order Entry), Fax 815-879-1495 for
Product Support.
WARRANTY
30 year limited warranty; 25 year limited warranty (4050). See General
Information Section for complete warranty details.
SPECIFICATIONS
Refer to “SPECIFICATIONS” section for suggested architectural
specifications.
MATERIALS
n
n
n
n
n
n
n
n
n
n
Drill 25/64˝ for
steel doors
or
Drill 3/8˝
for wood doors
High strength cast iron or cast aluminum (4050) cylinder.
Forged steel main arms.
One piece forged steel piston.
Double heat treated pinion.
LCN’s all weather “Liquid X” fluid performs to temperature
ranges from 120°F (49°C) to -30°F (-35°C) without any seasonal
adjustment.
LCN's standard all weather fluid performs to temperature ranges
from 120°F (49°C) to -30°F (-35°C). .
High efficiency, full complement, low friction bearings.
Tamper resistant regulating screws.
Full rack and pinion hydraulic action.
Quiet, low friction track and roller combination for all single lever arm
(track style) closers.
2
Notes:
1. For Thru Bolts, specify door thickness if other than 1-3/4˝ (44mm),
represented in diagram as dimension "X".
2. Phillips head, metric machine screws are available, please specify.
3. LCN recommends the use of wood screws, available in optional WMS screw packs,
for wood door applications.
MAINTENANCE
Closers mounted according to LCN installation instructions require no
periodic maintenance or adjustments.
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4010
Series
Features
The 4010 is LCN’s best performing heavy duty closer designed specifically for institutional
and other rugged high traffic applications.
Certifications
Body Construction
Cover
Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
n
n
n
n
n
Fasteners
Cast Iron Body
Full Complement Bearing
1-1/2˝ Diameter Piston
11/16˝ Diameter Double Heat Treated
Pinion Journal
Fluid
All Weather Fluid
Handing
Handed
Templating
Peel-n-Stick templates 2-1/2˝ x 6˝ Mounting Hole Pattern
n
Self Reaming and Tapping Screws (SRT)
Mounting
Hinge (Pull Side)
Arms
Regular Arm
Finishes/Colors/
Powder Coat
n
n
n
n
n
n
n
n
n
30 years
ptional SRI primer - powder coat only
O
Optional plated finishes
RE
GU
L
ST AR
AN (DO
DA UB
HO RD LE)
LD (SI
NG
LE
FU OPE
)
N
SI
BL
ED E L
IN
A/
K
H
CU EDA
SH
/
SC HCU
US SH
H
DO /SH
UB CU
S
LE
EG H
RE
SS
ON
TI
IT
AC
IL
B*
*
D
YE
LA
AV
D
IB
DE
AC
CE
SS
ZE
ND
SI
N-
HA
*ARM FUNCTION
CYLINDER
Y
COVER
ED
FINISH
N-
HI
NG
E(
TO PUL
L)
P
SID
J
TO AM E
B
P
JA (PU
PA MB LL)
RA
(P
U
L
ST LEL SH)
OP
AR
FA M
CE
PO
W
D
PL ER C
AT
O
ED AT
MOUNTING
140°
AVAILABLE
NOT AVAILABLE
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
NO
Special
Templates
NO
Warranty
Adjustable 1-5 or Sized 6
PL
AS
T
M IC
ET
AL
Size
Plastic, Standard
Metal, Optional
140° 140°
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening/hold-open point with standard template.
** Advanced Variable Backcheck.
3
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4010
Series
Mounting details
Hinge (Pull) Side
Mounting
B
2-11/16"
68 mm
3-1/2"
89 mm
12-1/4"
311 mm
11-1/2"
292 mm
C
4010-18
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point or where a door cannot swing 140°
Reveal
Should not exceed 3/4˝ (19 mm). Should not exceed 1/8˝ (3 mm) for Fusible link arm
Top Rail
n
n
n
Delayed Action
n
n
n
n
Maximum Opening
Less than 3-3/4˝ (95 mm) requires PLATE, 4010-18
Plate requires 2˝ (51 mm) minimum
Clearance of 2-1/4˝ (57 mm) behind door required for 90° installation
Add suffix “DEL” to selected cylinder
Not available with 4016 cylinder
Delays closing from maximum opening to approximately 70°.
Delay time adjustable up to approximately 1 minute
Can be templated for:
100°:
A = 5-15/16˝ (151 mm)
B = 11-15/16˝ (303 mm)
140°:
A = 4-3/16˝ (106 mm)
B = 10-3/16˝ (259 mm)
Hold-open points up to maximum opening with hold-open arm
Arm Clearance
Regular arm:
C = 1-1/16˝ (27 mm)
Hold-open arm:
C = 1-3/8˝ (35 mm)
Fusible link arm requires:
C = 1-5/8˝ (41 mm)
Note:
• Hold-open points up to maximum opening with hold-open arm
4
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
1"
25 mm
3-5/8"
92 mm
2-1/4"
57 mm
A
3/4"
19 mm
n
009426 rev. 2/16
4010
Series
Accessories
Cylinders
Covers
Installation Accessories
Right Hand Shown
4011(6)-3071
Cast Iron Cylinder Assembly
Handed
Non-handed
n
n
Handed
n
Standard
n
4010-18
Plate
4010-72MC
Metal Cover
4010-72
Plastic Cover
n
n
Standard
n
n
equired for plated finishes
R
and custom powder coat
finishes
n
Required where top rail is less
than 3-3/4˝ (95 mm)
Requires minimum 2˝ (51 mm)
top rail
Optional
Arms
4010-3077
Regular Arm
Non-handed
n
4010-3049
Hold-Open Arm
n
4010-3049FL
Fusible Link Arm
rovides hold-open function,
P
adjustable at elbow
Optional
n
Handed
n
Releases hold-open function
when exposed to temperatures
above 165° F. 1/8˝ (3 mm)
maximum reveal
n
Optional
n
NOTE: Check local codes before
specifying FL arms. NOT A life safety
product!
5
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4010
Series
Ordering Information
How-to-order 4010 Series closers
Closer will be shipped with:
- Standard cylinder
- Standard cover
- Regular arm
- Self-reaming and tapping screws
3. Select finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary,
Light Bronze, Black, Brass.
1. Select cylinder size
4011 (adjustable from size 1 to 5)
4016 (DEL not available)
2. Specify hand
RH
LH
unless options listed below are selected.
Closer options
Cylinder
Delayed Action (DEL)
Cover
Metal (MC)
Arm
Hold-Open (H)
Fusible Link, 165°F (FL)
Finish
Custom Powder Coat (RAL) ___________
(handed metal cover required)
Screw Pack
TB* & SRT Screw (TBSRT)
Wood & Machine Screw (WMS)
TB*, Wood & Machine Screw
(TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTRX)
* Specify door thickness if other than
1-3/4˝.
Installation Accessories
Plate, 4010-18
Special Template
ST- _________
lated Finish, US ___________
P
(handed metal cover required)
SRI primer (use with powder coat
finishes only)
Table of sizes
n
Select closer based on width of door
The spring power of non-sized 4011 cylinder is adjustable from size 1 through size 5 and is shipped set to size 3
n
n
n
Sized 4010 Series cylinders available in size 6
Delayed action not available with 4016 cylinder
Exterior (and Vestibule) door width
Interior door width
24˝
30˝
36˝
42˝
48˝
24˝
34˝
38˝
48˝
54˝
60˝
610mm
762mm
914mm
1067mm
1219mm
610mm
864mm
965mm
1219mm
1372mm
1524mm
size 2
*4011
*4011
size 3
size 4
size 5
size 6
4016
4016
minimum door width
Minimum door width
Indicates recommended range of door width for closer size.
* Adjustable Size 1 thru 5.
Reduced opening force 4010 Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for
information on systems that meet reduced
opening force requirements without effecting
closing power.
DOOR WIDTH
36˝
42˝
48˝
8.5* lbs.
4011
4011
4011
5.0* lbs.
4011
4011
4011
* Maximum opening force.
6
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4010T
Series
Features
The 4010T is LCN’s best performing heavy duty track closer designed specifically for interior
doors in institutional and other rugged high traffic applications.
Certifications
Cover
Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
n
n
Fasteners
Body Construction
n
n
n
n
Cast Iron Body
Full Complement Bearing
1-1/2˝ Diameter Piston
11/16˝ Diameter Double Heat Treated
Pinion Journal
Fluid
All Weather Fluid
Handing
Handed
Templating
Peel-n-Stick templates 2-1/2˝ x 6˝ Mounting Hole Pattern
Self Reaming and Tapping Screws (SRT)
Mounting
Hinge (Pull Side)
Arms
Standard Arm and Track with Roller
Finishes/Colors/
Powder Coat
n
n
n
n
n
n
n
n
n
ptional SRI primer - powder coat only
O
Optional plated finishes
RE
GU
L
ST AR
AN (DO
DA UB
HO RD LE)
LD (SI
NG
LE
FU OPE
)
N
SI
BL
E
ED
LI
A/
N
HE K
CU DA
SH
/
SC HCU
US SH
H
DO /SH
UB CU
LE SH
EG
RE
SS
ND
ED
SI
AC ZE
CE D
S
DE SIB
LA ILI
TY
Y
AV ED
AC
B
TI
ON
N-
NNO
*ARM FUNCTION
CYLINDER
HA
C
COVER
AL
HI
NG
E(
TO PUL
L)
P
JA SID
E
M
TO
B
P
JA (PU
PA MB LL)
RA
(P
U
L
ST LEL SH)
OP
AR
FA M
CE
PO
W
D
PL ER C
AT
O
ED AT
FINISH
NO
MOUNTING
180° 120°
AVAILABLE
NOT AVAILABLE
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
TI
Special
Templates
ET
30 years
AS
Warranty
M
Sized 1, 3 or 4
PL
Size
Plastic, Standard
Metal, Optional
100°
Closer available with less than 5.0 lbs. Opening force @ 36˝
* M
aximum opening/hold-open point with standard template.
7
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4010T
Series
Mounting details
Hinge (Pull) Side
Mounting
1-7/16"
37 mm
2"
51 mm
22-3/4"
578 mm
3-11/16"
94 mm
1-1/4"
32 mm
2-1/4"
57 mm
3-1/2"
89 mm
12-1/4"
311 mm
3-15/16"
100 mm
1-1/16"
27 mm
4010T-18
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point or where a door cannot swing 180°
Note: Optional track bumper assembly assists backcheck in cushioning the opening swing of the door. It is not intended to replace an
auxiliary stop
Reveal
Top Rail
n
Should not exceed 1/8˝ (3 mm) for standard arm
Should not exceed 3-5/16˝ (84 mm) for double egress arm
n
Less than 3-3/4˝ (95 mm) requires PLATE, 4010T-18
n
Note: Plate requires 2˝ (51 mm) minimum
Head Frame
Requires 1-1/2˝ (38 mm) minimum
Clearance
n
Maximum Opening
n
n
n
2-1/4˝ (57 mm) behind door required for 90° or 180° installation
Templating allows 180° with standard arm, limited to 120° when optional bumper is installed
Consult factory if door will be held open at 180°
Variable hold-open angles with infinite options
Notes:
• Many track style door closers are capable of allowing 180° of door swing
• The majority of track style closers are at their weakest closing force in the 180 – 130° range
• Consult factory for applications where door must swing 180°
8
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4010T
Series
Accessories
Cylinders
Covers
Right Hand Shown
4011T(3)(4)-3071
Cast Iron Cylinder Assembly
Handed
Non-handed
n
n
4010T-72MC
Metal Cover
4010T-72
Plastic Cover
Handed
n
Standard
n
n
Standard
equired for plated finishes
R
and custom powder coat
finishes
n
Optional
n
Arms
4010T-3077DE
Double Egress Arm
4010T-3077T
Standard Arm
Handed
Handed
n
n
n
Does not include track roller
n
n
n
F or double egress doors and
frames
Does not include track roller
aximum reveal is 3 5/16˝
M
(84mm)
Optional
n
Tracks
4010T-3038B
Standard Track with Bumper
4010T-3038
Standard Track
Non-handed
n
Non hold-open
n
n
n
Will accept hold-open clip and/or
bumper assembly
n
Standard
n
4010T-3038H
Hold-Open Track
Non-handed
n
Non hold-open
n
n
With bumper assembly installed
Will accept hold-open clip
n
n
4010T-3038HB
Hold-Open Track with Bumper
Non-handed
n
Non-handed
With hold-open clip installed
n
n
Will accept bumper assembly
n
Optional
n
ith hold-open clip and bumper
W
assembly installed
Optional
Optional
9
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4010T
Series
Accessories
Installation Accessories
4010T-18
Plate
n
n
equired where top rail is less
R
than 3-3/4˝ (95 mm)
Requires minimum 2˝
(51 mm) top rail
4010T-3054
Hold-Open Clip
4010T-169
Track Bumper
n
n
n
ounts in track to assist
M
backcheck, does not replace
auxiliary stop
n
n
Limits maximum opening
C onsists of bumper, bumper
post, and mounting screw
4010T-3034
Track Roller
Mounts in track to provide
hold-open function)
old-open point controlled by
H
clip location
n
n
uiet, low friction roller
Q
assembly
houlder dimension “X” = 1/16˝
S
(2mm)
Consists of clip and mounting
screws
n
n
equires 4010T-3034H Track
R
Roller
4010T-3034H
Track Roller
n
n
Quiet, low friction roller assembly
houlder dimension “X” = 1/16˝
S
(2mm)
Spring-loaded hold-open
mechanism
n
10
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4010T
Series
Ordering Information
How-to-order 4010T Series closers
1. Select cylinder size
4011T (ADA)
4013T
4014T
Closer will be shipped with:
- Standard cylinder
- Standard cover
- Standard arm
- Track roller
- Standard track
- Self-reaming and tapping screws
3. Select finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary,
Light Bronze, Black, Brass.
2. Specify hand
RH
LH
unless options listed below are selected.
Closer options
Finish
Custom Powder Coat (RAL) ___________
(handed metal cover required)
Plated Finish, US ______________
(handed metal cover required)
SRI primer (use with powder coat
finishes only
Cover
Metal (MC)
Arm
Double Egress (DE)**
Track
Regular with Bumper (BUMPER)
Hold-Open (HO)
Hold-Open with Bumper (HBUMPER)
** Note: Using this closer on double-egress doors and frames requires the closer to be ordered with a “DE” suffix
(i.e., 4014T DE). Standard “DE” option will accommodate pull side reveals up to 3-5/16˝. For deeper reveals,
consult factory.
Screw Pack
TB* & SRT Screw (TBSRT)
Wood & Machine Screw (WMS)
TB*, Wood & Machine Screw (TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTRX)
* Specify door thickness if other than 1-3/4˝
Installation Accessories
Plate, 4010T-18
Special Template
ST- _________
Table of sizes
n
n
n
Select closer based on width of door
Sized 4010T Series cylinders available in size 1, 3 or 4
Closing power of all 4010T Series closers may be increased 15%
Interior door width
26˝
34˝
38˝
48˝
660mm
864mm
965mm
1219mm
4011T*
4013T
4014T
size 1
size 3
size 4
Minimum door width. To meet ADA, refer to chart below.
Indicates recommended range of door width for closer size.
** Note: Using this closer on double-egress doors and frames requires the closer to be ordered with a “DE” suffix (i.e., 4014T DE). Standard “DE”
option will accommodate pull side reveals up to 3-5/16˝. For deeper reveals, consult factory.
Reduced opening force 4010T Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to AUTOMATIC OPERATORS section for
information on systems that meet reduced
opening force requirements without effecting
closing power.
DOOR WIDTH
36˝
42˝
48˝
8.5* lbs.
N/A
N/A
N/A
5.0* lbs.
4011T
4011T
4011T
* Maximum opening force.
11
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
12
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4020
Series
Features
The 4020 is LCN’s best performing heavy duty closer designed specifically for institutional
and other rugged high traffic applications.
Certifications
Cover
Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
n
n
Fasteners
Body Construction
n
n
n
n
Cast Iron Body
Full Complement Bearing
1-1/2˝ Diameter Piston
11/16˝ Diameter Double Heat Treated
Pinion Journal
Fluid
All Weather Fluid
Handing
Handed
Templating
Peel-n-Stick templates 2-1-2˝ x 6˝ Mounting Hole Pattern
Self Reaming and Tapping Screws (SRT)
Mounting
Top Jamb (Push Side)
Arms
Regular arm
Finishes/Colors/
Powder Coat
n
n
n
n
n
n
n
n
n
Size
Adjustable 1-5 or Sized 6
Warranty
30 years
Optional SRI primer - powder coat only
Optional plated finishes
RE
GU
L
ST AR
AN (DO
DA UB
HO RD LE)
LD (SI
NG
FU OPE LE)
N
SI
BL
ED E L
IN
A/
K
H
CU EDA
SH
/
SC HCU
US SH
H
DO /SH
UB CU
SH
LE
EG
RE
SS
NHA
NO
PL
*ARM FUNCTION
CYLINDER
N
N- DED
SI
AC ZE
CE D
S
DE SIB
LA ILI
TY
Y
AV ED
B* AC
TI
*
ON
COVER
AS
TI
C
ET
AL
HI
NG
E
TO (PUL
L)
P
SID
J
E
TO AM
B
P
JA (PU
PA MB LL)
RA
(P
U
L
ST LEL SH)
OP
AR
FA M
CE
PO
W
D
PL ER C
AT
O
ED AT
FINISH
NO
MOUNTING
180°
AVAILABLE
NOT AVAILABLE
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
M
Special
Templates
Plastic, Standard
Metal, Optional
140° 140°
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening/hold-open point with standard template.
** Advanced Variable Backcheck.
13
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4020
Series
Mounting details
Top Jamb (Push) Side
Mounting
3-5/8"
92 mm
3-1/2"
89 mm
2-1/4"
57 mm
A
2-11/16"
68 mm
B
11-1/2"
292 mm
3/4"
19 mm
1"
25 mm
12-1/4"
311 mm
4020-18
4020-18G
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point or where the door cannot swing 180°
Reveal
n
n
n
Head Frame
Top Rail
Less than 3-7/16˝ (87 mm) requires PLATE, 4020-18 Use PLATE, 4020-18G for flush ceiling condition.
Either plate requires 1-3/4˝ (44 mm) frame minimum.
n
n
n
Delayed Action
n
n
n
n
Maximum Opening
2-9/16˝ (65 mm) allows 180° opening with regular arm
4-13/16˝ (122 mm) allows up to 140° opening with regular arm
8˝ (203 mm) allows up to 140° opening with LONG ARM where standard rod and shoe is replaced with optional
long rod and shoe (4020-79LR)
Requires minimum 1-1/2˝ (38 mm)
Closer on 4020-18 plate requires 2˝ (51 mm) minimum
Closer on 4020-18G plate requires 2-3/4˝ (70 mm) minimum
Add suffix “DEL” to selected cylinder.
Not available with 4026 cylinder
Delays closing from maximum opening to approximately 75°
Delay time adjustable up to approximately 1 minute
Can be templated for:
100°:
A = 6˝ (152 mm)
B = 12 3/8˝ (314 mm)
140°:
A = 4˝ (102 mm)
B = 10 3/8˝ (264 mm)
180°:
Notes:
• Hold-open points up to maximum opening or 140°, whichever is less, for hold-open or fusible link arm
• For hold-open beyond 140°, use 4110 Series closer
14
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
A = 2˝ (51 mm)
B = 8 3/8˝ (213 mm)
4020
Series
Accessories
Cylinders
Covers
Left Hand Shown
4021(6)-3071
Cast Iron Cylinder Assembly
Right Hand Shown
4020-72MC
Metal Cover
4020-72
Plastic Cover
n
Handed
n
Handed
n
n
Standard
n
Standard
n
Handed
equired for plated finishes
R
and custom powder coat
finishes
Optional
n
Arms
4020-3049
Hold-Open
4020-3077L
Long Arm
4020-3077
Regular Arm
Non-handed
Non-handed
n
Handed
n
n
4020-3049FL
Fusible Link
Handed
n
I ncludes 4020-79LR for
deep reveals.(see page 14 for
allowable reveals)
n
n
Optional
n
n
rovides hold-open function,
P
adjustable at elbow
5 -3/4˝ (146 mm) maximum
reveal, 140° hold open
Optional
Releases hold-open function,
adjustable at shoe, when exposed
to temperatures above 165° F
n
n
3-7/8˝ (98 mm) maximum reveal
Optional
n
n
NOTE: Check local codes before specifing
FL arms. NOT A life safety product!
Installation Accessories
4020-18G
Plate
4020-18
Plate
n
n
n
equired where head frame is
R
less than 3-7/16˝ (87 mm)
equires minimum 1-3/4˝ (44
R
mm) minimum head frame and
2˝ (51 mm) top rail
n
n
For flush ceiling condition
requires minimum 1-3/4˝ (44
R
mm) minimum head frame and
2-3/4˝ (70 mm) top rail
3-7/8˝ (98 mm) maximum reveal
15
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4020
Series
Ordering Information
How-to-order 4020 Series closers
1. Select cylinder size
4021 (adjustable from size 1 to 5)
4026 (DEL not available)
2. Specify hand
RH
LH
Closer will be shipped with:
- Standard cylinder
- Standard cover
- Regular arm
- Self-reaming and tapping screws
3. Select finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary,
Light Bronze, Black, Brass.
unless options listed below are selected.
Closer options
Screw Pack
TB* & SRT Screw (TBSRT)
Wood & Machine Screw (WMS)
TB*, Wood & Machine Screw (TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTRX)
* Specify door thickness if other than 1-3/4˝
Cylinder
Delayed Action (DEL)
Cover
Metal (MC)
Arm
Hold-Open (H)
Fusible Link, 165°F (FL)
Installation Accessories
Plate, 4020-18
Plate, 4020-18G
Finish
Custom Powder Coat (RAL) __________
(handed metal cover required)
Plated Finish, US _____________
(handed metal cover required)
SRI primer (use with powder coat
finishes only)
Special Template
ST- _________
Table of sizes
n
Select closer based on width of door
The spring power of non-sized 4021 cylinder is adjustable from size 1 through size 5 and is shipped set to size 3
n
n
n
Sized 4020 Series cylinders available in size 6
Delayed action not available with 4026 cylinder
Exterior (and Vestibule) door width
Interior door width
24˝
30˝
36˝
42˝
48˝
24˝
34˝
38˝
48˝
54˝
60˝
610mm
762mm
914mm
1067mm
1219mm
610mm
864mm
965mm
1219mm
1372mm
1524mm
*4021
size 3
size 4
size 5
size 6
size 2
*4021
size 3
size 4
size 5
size 6
4026
4026
Minimum door width
Minimum door width
Indicates recommended range of door width for closer size.
* Adjustable Size 1 thru 5.
Reduced opening force 4020 Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to AUTOMATIC OPERATORS section for
information on systems that meet reduced
opening force requirements without effecting
closing power.
DOOR WIDTH
36˝
42˝
48˝
8.5* lbs.
4021
4021
4021
5.0* lbs.
4021
4021
4021
* Maximum opening force.
16
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4020T
Series
Features
The 4020T is LCN’s best performing heavy duty track closer designed specifically for
interior doors in institutional and other high traffic applications.
Certifications
Body Construction
Cover
Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
n
n
n
n
n
Cast Iron Body
Full Complement Bearing
1-1/2˝ Diameter Piston
11/16˝ Diameter Double Heat Treated
Pinion Journal
Fluid
All Weather Fluid
Handing
Handed
Templating
Peel-n-Stick templates 2-1/2˝ x 6˝ Mounting Hole Pattern
n
Fasteners
Self Reaming and Tapping Screws (SRT)
Mounting
Top Jamb (Pull Side)
Arms
Standard arm, track with roller
Finishes/Colors/
Powder Coat
n
n
n
n
n
n
n
n
n
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
ptional SRI primer - powder coat only
O
Optional plated finishes
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
CE
AC
RE
GU
L
ST AR
AN (DO
DA UB
HO RD LE)
LD (SI
NG
LE
FU OPE
)
N
SI
BL
E
ED
LI
A/
N
HE K
CU DA
SH
/
SC HCU
US SH
H
DO /SH
UB CU
SH
LE
EG
RE
SS
SS
I
LA BILI
YE TY
AV D
B* AC
TI
*
ON
D
ZE
ND
SI
PL
AS
T
M IC
ET
AL
*ARM FUNCTION
CYLINDER
ED
COVER
DE
FINISH
HI
NG
E(
TO PUL
L)
P
SID
J
TO AM E
B
P
JA (PU
PA MB LL)
RA
(P
U
L
ST LEL SH)
OP
AR
FA M
CE
PO
W
D
PL ER C
AT
O
ED AT
MOUNTING
HA
Special
Templates
N-
30 years
N-
Warranty
NO
Sized 1, 3 or 4
NO
Size
Plastic, Standard
Metal, Optional
180° 100°
AVAILABLE
NOT AVAILABLE
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening/hold-open point with standard template.
** Advanced Variable Backcheck.
17
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4020T
Series
Mounting details
Top Jamb (Pull Side)
Mounting
5-5/16"
151 mm
22-3/4"
578 mm
1-5/8"
41 mm
4020T-18
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point or where a door cannot swing 180°
3-1/2"
89 mm
1-1/16"
27 mm
4-1/16"
103 mm
1-1/4"
32 mm
2-1/4"
57 mm
12-1/4"
311 mm
Note: Optional track bumper assembly assists backcheck in cushioning the opening swing of the door. It is not intended to replace an
auxiliary stop
Reveal
Should not exceed 1/8˝ (3 mm)
Head Frame
n
n
Less than 3-7/8˝ (98 mm), requires PLATE, 4020T-18
Plate requires 1-3/4˝ (44 mm) minimum
Clearance
1-1/2˝ (38 mm) behind door required for 90° or 180° installation
Maximum Opening
n
n
n
Templating allows 180° with standard track arm, limited to 100° with optional bumper installed
Consult factory if door will be held open at 180°
Variable hold-open angles with infinite options
Notes:
• Many track style door closers are capable of allowing 180° of door swing
• The majority of track style closers are at their weakest closing force in the 180° – 130° range
• Consult factory for applications where door must swing 180°
18
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4020T
Series
Accessories
Cylinders
Covers
Right Hand Shown
4021T(3)(4)-3071
Cast Iron Cylinder Assembly
Left Hand Shown
4020T-72MC
Metal Cover
4020T-72
Plastic Cover
n
Handed
n
Handed
n
n
Standard
n
Standard
n
Handed
equired for plated finishes
R
and custom powder coat
finishes
Optional
n
Arms
4020T-3077T
Standard Arm
Handed
n
n
Roller not included with arm
Tracks
4020T-3038B
Standard Track with Bumper
4020T-3038
Standard Track
Non-handed
n
Non hold-open
n
n
n
Will accept hold-open clip and/or
bumper assembly
n
Standard
n
4020T-3038H
Hold-Open Track
Non-handed
n
Non hold-open
n
n
With bumper assembly installed
Will accept hold-open clip
n
n
4020T-3038HB
Hold-Open Track with Bumper
Non-handed
n
With hold-open clip installed
n
Non-handed
n
Will accept bumper assembly
n
Optional
n
ith hold-open clip and bumper
W
assembly installed
Optional
Optional
19
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4020T
Series
Accessories
Installation Accessories
4020T-18
Plate
n
n
equired where head frame is
R
less than 3-7/8˝ (98 mm)
Requires minimum 1-3/4˝
(44 mm) frame face
4020T-3054
Hold-Open Clip
4020T-169
Track Bumper
n
n
n
ounts in track to assist
M
backcheck, does not replace
auxiliary stop
n
n
Limits maximum opening
C onsists of bumper, bumper
post, and mounting screw
4020T-3034
Track Roller
Mounts in track to provide
hold-open function
old-open point controlled by
H
clip location
n
n
uiet, low friction roller
Q
assembly
houlder dimension “X” = 1/16˝
S
(2mm)
Consists of clip and mounting
screws
n
n
equires 4020T-3034H Track
R
Roller
4020T-3034H
Track Roller
n
n
Quiet, low friction roller assembly
houlder dimension “X” = 1/16˝
S
(2mm)
Spring-loaded hold-open
mechanism
n
20
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4020T
Series
Ordering Information
How-to-order 4020T Series closers
1. Select cylinder size
4021T (ADA)
4023T
4024T
Closer will be shipped with:
-Standard cylinder
- Standard cover
- Standard arm
- Track roller
- Standard track
- Self-reaming and tapping screws
3. Select finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary,
Light Bronze, Black, Brass.
2. Specify hand
RH
LH
unless options listed below are selected.
Closer options
Screw Pack
TB* & SRT Screw (TBSRT)
Wood & Machine Screw (WMS)
TB*, Wood & Machine Screw
(TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTRX)
* Specify door thickness if other than
1-3/4˝
Installation Accessories
Plate, 4010T-18
Special Template
ST- _________
Cover
Metal (MC)
Track
Standard with Bumper (BUMPER)
Hold-Open (HO)
Hold-Open with Bumper (HBUMPER)
Finish
Custom Powder Coat (RAL) __________
(handed metal cover required)
Plated Finish, US _____________
(handed metal cover required)
SRI primer (use with powder coat
finishes only)
Table of sizes
n
n
n
n
Select closer based on width of door
4020T Series cylinders available in size 1, 3 or 4
Closing power of all 4020T Series closers may be increased 15%
Specify next higher size closer where strong drafts exist
Interior door width
26˝
34˝
38˝
48˝
660mm
864mm
965mm
1219mm
4021T*
4023T
4024T
size 1
size 3
size 4
Minimum door width
Indicates recommended range of door width for closer size.
21
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
22
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4030
Series
Features
The 4030 is a cast iron, universal closer designed specifically for doors in moderate traffic
conditions. This versatile closer compliments the rest of the heavy duty 4000 Series and
offers the choice of three mountings and multiple arm options.
Certifications
Body Construction
Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
n
n
n
n
Cast Iron Body
Full Complement Bearing
1-1/8˝ Diameter Piston
1/2˝ Diameter Single Heat Treated
Pinion Journal
Cover
Metal, Standard
Fasteners
Self Reaming and Tapping Screws (SRT)
Mounting
Hinge (Pull Side), Top Jamb (Push Side),
Parallel Arm (Push Side)
Arms
Regular arm
Finishes/Colors/
Powder Coat
n
n
n
Fluid
All Weather Fluid
Handing
Non-Handed
Templating
Peel-n-Stick templates 1-23/32˝ x 6-17/16˝ Mounting Hole Pattern
n
n
n
n
n
n
Size
Adjustable Spring Size 1-4
Warranty
30 years
Optional SRI primer - powder coat only
Optional plated finishes
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
DO
UB
LE
EG
RE
SS
Special
Templates
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
AVAILABLE
NOT AVAILABLE
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening/hold-open point with standard template. See individual
closer series for degrees of opening per installation.
** Advanced Variable Backcheck
23
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4030
Series
Mounting details
Hinge (Pull) Side
Mounting
1-3/4"
44 mm
4-1/2"
114 mm
11-3/8"
289 mm
9-1/4"
235 mm
2-11/16"
69 mm
1-3/8"
35 mm
3/4"
19 mm
10-3/8"
264 mm
2-7/8"
73 mm
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point or where a door cannot swing 180°
Reveal
Should not exceed 3/16˝ (5 mm) for regular arm or 3/16˝ (5 mm) for hold-open arm
Top Rail
Requires 2-7/8˝ (73 mm) minimum
Clearance
1-3/4˝ (44 mm), behind door required for installation
Maximum Opening
n
n
Can be templated for 180°
Hold-open points up to maximum opening with hold-open arm
24
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4030
Series
Mounting details
Top Jamb (Push Side)
Mounting
1-3/4"
44 mm
11-3/8"
289 mm
10-3/8"
264 mm
2-7/8"
73 mm
3-5/8"
92 mm
7-5/8"
194 mm
4030-18TJ
3/4"
19 mm
2-11/16"
69 mm
1-1/2"
38 mm
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point or where the door cannot swing 180°
Reveal
n
n
up to 3-1/2˝ (89 mm) allows 180° opening
up to 7-1/2˝ (191 mm) with long arm allows for 140° opening
Top Rail
Requires 1-1/2˝ (38 mm) minimum from stop
Head Frame
n
n
Maximum Opening
n
n
Less than 2-1/4˝ (57 mm) requires PLATE, 4030-18TJ
Plate requires 1-1/2˝ (38 mm) minimum
Can be templated for 180°
Hold-open points up to maximum opening with hold-open arm
25
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Parallel arm mount
4030
Series
6-1/4"
160 mm
4"
102 mm
18"
457 mm
4"
102 mm
Mounting details
5"
127 mm
1-3/4"
44 mm
Parallel arm (Push Side)
and EDA mounting
3"
76 mm
10-3/8"
264 mm
4030-18PA
EDA mount
4"
102 mm
8-1/4"
210 mm
5"
127 mm
1-3/4"
44 mm
18"
457 mm
5-1/2"
140 mm
2-3/4"
70 mm
2-1/8"
54 mm
4030-18PA
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point or where a door cannot swing maximum opening
Clearance
n
n
Top Rail
n
n
For 4030-62PA shoe is 4˝ (102 mm) from door face
EDA arm is 5-1/2˝ (140 mm) from door face
Less than 5˝ (127 mm) measured from the stop requires PLATE, 4030-18PA
Plate requires 1-3/4˝ (44 mm) minimum
Stop Width
Minimum 1˝ (25 mm)
Head Frame
Flush or single rabetted requires PA SHOE ADAPTER, 4030-419
Blade Stop
Clearance, requires 1/2˝ (13 mm) BLADE STOP SPACER, 4030-61
Auxiliary Shoe
n
n
4030-62A allows installation of regular arm with overhead holder/stop
Special templating required
EDA Arm
Requires SHOE SUPPORT, 4030-30 for fifth screw anchorage where reveal is less than 3-1/16˝ (78 mm)
Maximum Opening
n
n
n
REGULAR or HOLD-OPEN arms can be templated for 180°
EDA template allows 110° maximum opening
Hold-open points up to maximum opening with hold-open arm
Notes:
• 4030 closers ordered with EDA arms include 4030-201 FIFTH HOLE SPACER to support the shoe
• REGULAR or HOLD-OPEN arm mounting requires PA SHOE, 4030-62PA for regular or HOLD-OPEN arms. Add prefix “P” to closer description (eg. P4031.)
• P4031 closer includes 4030-201 FIFTH HOLE SPACER to support PA SHOE
26
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
CUSH mount
B
4030
Series
4"
102 mm
5"
127 mm
1-3/4"
44 mm
18"
457 mm
A
5-1/2"
140 mm
Mounting details
2-3/4"
70 mm
10-3/8"
264 mm
CUSH and Spring CUSH
Mounting
4030-18PA
Spring CUSH mount
Spring Cush dead stop points are approximately 5° greater than templated stop point.
B
4"
102 mm
5"
127 mm
1-3/4"
44 mm
A
5-1/2"
140 mm
18"
457 mm
10-3/8"
264 mm
2-3/4"
70 mm
4030-18PA
Clearance
For CUSH or SPRING CUSH shoe is 5-1/2˝ (140 mm) from door face
Head Frame
Flush or rabetted requires CUSH FLUSH PANEL ADAPTER, 4030-419
CUSH or Spring CUSH ARM
Requires SHOE SUPPORT, 4030-30 for fifth screw anchorage where reveal is less than 3-1/16˝ (78 mm)
Maximum opening
CUSH and SPRING CUSH arms can be templated for maximum opening/hold-open point at:
85°:
A = 3-5/8 (92 mm)
B = 9-3/4˝ (248 mm)
90°:
A = 3˝ (76 mm)
B = 9-1/8˝ (232 mm)
100°*: A
= 1-7/8˝ (48 mm)
B = 8˝ (203 mm)
*100° mounting will not work with swing clear hinges.
Note:
• 4031 closers ordered with CUSH or SPRING CUSH arms include 4030-201 FIFTH HOLE SPACER to support the shoe
27
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4030
Series
Accessories
Cylinders
Covers
4031-3071
Cast Iron Cylinder Assembly
4030-72MC
Metal Cover
Non-handed
Non-handed
n
n
n
Standard
n
Standard
Installation Accessories
4030-18TJ
Plate
n
n
equired for top jamb mounting
R
where head frame is less than
2-1/4˝ (57 mm) or flush ceiling
condition exists
equires 1-1/2˝ (38 mm)
R
minimum
4030-62A
Auxiliary Shoe
n
n
Requires a top rail of 7˝ (178 mm)
eplaces -62PA for parallel arm
R
mounting of regular arm with
some overhead holder/stop
4030-30
CUSH Shoe Support
4030-18PA
Plate
n
n
equired for parallel arm
R
mounting where top rail is less
than 5˝ (127 mm), measured
from the stop
n
rovide anchorage for fifth screw
P
used with CUSH arms where
reveal is less than 3-1/16˝
(78 mm)
n
L owers parallel arm shoe to
clear 1/2˝ (13 mm) blade stop
requires 1-3/4˝ (44 mm)
R
minimum
4030-419
PA Flush Panel Adapter
n
4030-61
Blade Stop Spacer
4030-62PA
PA Shoe
rovides horizontal mounting
P
surface for PA or CUSH shoe on
single rabetted or flush frame
n
equired for parallel arm
R
mounting
Optional
n
28
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Arms
4030
Series
4030-3077
Regular Arm
Non-handed
n
n
n
n
Mounts hinge side or top jamb
n
4031 closer includes PA SHOE,
P
4030-62PA is required for parallel
arm mounting
n
4030-3049
Hold-Open Arm
n
n
n
n
Non-handed
n
Non-handed
n
I ncludes LONG HEAD AND TUBE,
4030-3048L for top jamb mount
with deep reveals
Optional
Non-handed
Handed
E xtra duty arm features solid
forged steel main and forearm for
potentially abusive installations
Non-handed
Handle controls hold-open
function
n
Optional
n
rm, provides hold-open function
A
adjustable at shoe
Optional
n
4030-3049SCNS
Spring HCUSH Arm
Non-handed
n
For abusive applications
Features solid forged steel main
arm and forearm with spring
loaded stop in the soffit shoe
n
Optional
n
n
Optional
n
rovides hold-open function with
P
templated stop/hold-open points
4030-3049EDA
Hold-Open EDA Arm
n
4030-3077SCNS
Spring CUSH Arm
Non-handed
n
n
n
n
Solid forged steel main arm and
forearm with stop in soffit shoe
I ncludes LONG ROD AND SHOE,
4030-79LR for top jamb mount
with deep reveals
4030-3077EDA
Extra Duty Arm
4030-3049CNS
Hold-Open CUSH Arm
n
n
Optional
n
Optional
Optional
ounts hinge side, top jamb or
M
parallel arm (62PA required)
Non-handed
n
Hold-open adjustable at shoe
4030-3077CNS
Cush-n-Stop® Arm
n
n
Optional
n
ounts hinge side, top jamb or
M
parallel arm (62PA required)
n
Non-handed
4030-3049L
Long Hold-Open Arm
Non-handed
Accessories
4030-3077L
Long Arm
4030-3077LD
Light Duty Arm
n
For abusive applications
Features solid forged steel main
arm and forearm with spring
loaded stop in the soffit shoe
n
Handle controls hold-open
function
n
n
Optional
n
29
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4030
Series
Ordering Information
How-to-order 4030 Series closers
Closer will be shipped with:
- Standard cylinder
- Standard metal cover
- Regular arm
- Wood and self-tapping machine screw pack
1. Select finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary,
Light Bronze, Black, Brass.
unless options listed below are selected.
Closer options
Optional Screw Packs
TB*, Wood & Machine Screw (TBWMS)
* Specify door thickness if other than
1-3/4˝.
Finish
Custom Powder Coat (RAL) ___________
Plated Finish, US ______________
SRI primer (use with powder coat
finishes only)
Installation Accessories
Plate, 4030-18TJ
Plate, 4030-18PA
CUSH Shoe Support, 4030-30
Blade Stop Spacer, 4030-61
Auxiliary Shoe, 4030-62A
PA Flush Panel Adapter, 4030-419
Special Template
ST- _________
Arm
Regular w/62PA (Rw/PA)
Regular w/62A (R/62A)
Long (LONG)
Hold-Open (H)
Hold-Open w/62PA (Hw/PA)
Long Hold-Open (HLONG)
Light Duty (LD)
Light Duty w/62A (LD/62A)
Light Duty w/62PA (LD/PA)
Light Duty Long (LDL)
EDA
HEDA (specify right or left hand)
Cush-N-Stop (CUSH)
HCush-N-Stop (HCUSH)
Spring Cush (SCUSH)
Spring HCush (SHCUSH)
Table of sizes
Non-sized 4031 cylinder is adjustable from sizes 1 to 4 and is shipped set to size 3.
n
Exterior (and Vestibule) door width
Interior door width
26˝
30˝
36˝
26˝
34˝
38˝
48˝
660mm
762mm
914mm
660mm
864mm
965mm
1219mm
4031
size 3
size 4
size 2
4031
size 3
size 4
Minimum door width
Minimum door width
Indicates recommended range of door width for closer size.
Reduced opening force 4030 Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to AUTOMATIC OPERATORS section for
information on systems that meet reduced
opening force requirements without effecting
closing power.
DOOR WIDTH
36˝
42˝
48˝
8.5* lbs.
4031
4031
4031
5.0* lbs.
4031
4031
4031
* Maximum opening force.
30
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4030T
Series
Features
The 4031T is a single lever (track) arm, surface mounted closer designed for interior use on
narrow head frames and top rails. The choice of three mountings and ease of installation
offer a versatile solution to door control in moderate traffic applications. The 4030T
compliments the heavy duty 4000 Series.
Certifications
Body Construction
Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
n
n
n
n
Cast Iron Body
Full Complement Bearing
1-1/8˝ Diameter Piston
1/2˝ Diameter Single Heat Treated
Pinion Journal
Cover
Metal, Standard
Fasteners
Self Reaming and Tapping Screws (SRT)
Mounting
Pull side on door, pull side on frame and
push side on door
Arms
Standard arm and track
Finishes/Colors/
Powder Coat
n
n
n
Fluid
All Weather Fluid
Handing
Non-Handed
Size
Adjustable Spring Size 1-3
n
Warranty
30 years
n
n
n
n
n
ptional SRI primer - powder coat only
O
Optional plated finishes
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
DO
UB
LE
EG
RE
S
S
Special
Templates
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
AVAILABLE
NOT AVAILABLE
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening/hold-open point with standard template. See individual
closer series for degrees of opening per installation.
31
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4030T
Series
Mounting details
Hinge (Pull Side)
Mounting
1-5/16"
33 mm
1-3/4"
44 mm
7-5/8"
194 mm
24-1/2"
622 mm
3/4"
19 mm
7/32"
6 mm
MAX.
CL
1-3/8"
35 mm
MIN.
2-7/8"
73 mm
1-3/8"
35 mm
10-3/8"
264 mm
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point or where a door cannot swing 180°
Reveal
Should not exceed 7/32˝ (6 mm)
Top Rail
Requires 2-7/8˝ (73 mm) minimum
Clearance
1-3/4˝ (44 mm), behind door required for installation
Maximum Opening
n
n
n
Can be templated for 180°
Consult factory if door will be held open at 180°
Hold-open points up to maximum opening point with hold-open option
otes:
N
• Many track style door closers are capable of allowing 180° of door swing.
• The majority of track style closers are at their weakest closing force in the 180°-130° range.
• Consult factory for applications where door must swing 180°.
32
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4030T
Series
Mounting details
Top Jamb (Push Side)
Mounting
1-5/16"
32 mm
1-3/4"
44 mm
4"
100 mm
10-3/8"
264 mm
3-1/4"
81 mm
3/4"
19 mm
1/8"
3 mm
MAX.
24-1/2"
622 mm
CL
1"
25 mm
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point or where the door cannot swing 180°
Reveal
Should not exceed 1/8˝ (3 mm)
Top Rail
Requires 1˝ (25 mm) minimum
Head Frame
Requires 2-7/8˝ (73 mm) minimum
Maximum Opening
n
n
n
1"
25 mm
MIN.
Can be templated for 180°
Consult factory if door will be held open at 180°
Hold-open points up to Maximum opening point with hold-open option
otes:
N
• Many track style door closers are capable of allowing 180° of door swing.
• The majority of track style closers are at their weakest closing force in the 180°-130° range.
• Consult factory for applications where door must swing 180°.
33
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4030T
Series
Mounting details
Stop Face (Push) Side
Mounting
1-1/2"
38 mm
1-5/16"
33 mm
1-3/4"
44 mm
24-1/2"
622 mm
1"
25 mm
CL
1-1/4"
32 mm
MIN.
4-1/8"
105 mm
1-1/4"
32 mm
11-5/8"
295 mm
CL
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point or where a door cannot swing 110°
Reveal
Should not exceed 1-3/4˝ (44 mm)
Top Rail
Requires 4-1/8˝ (105 mm) minimum measured from the stop
Head Frame
Minimum 1-1/4˝ (32 mm)
Maximum opening
n
n
Can be templated for 110°
Hold-open points up to maximum opening with hold-open option
otes:
N
• Many track style door closers are capable of allowing 180° of door swing.
• The majority of track style closers are at their weakest closing force in the 180°-130° range.
• Consult factory for applications where door must swing 180°.
34
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4030T
Series
Accessories
Cylinders
Covers
Arms
4031T-3071
Cast Iron Cylinder Assembly
4030T-72MC
Metal Cover
4030T-3077T
Standard Arm
Non-handed
Non-handed
n
n
Non-handed
n
n
Standard
n
n
ingle lever mounts hinge side,
S
top jamb or stop face
Track roller included
Tracks
4030T-3038H
Hold-Open Track
4030T-3038
Standard Track
Non-handed
Non-handed
n
n
n
on hold-open track mounts on
N
either side of the door
n
Will accept hold-open clip
n
Standard
n
n
n
old-open track mounts on either
H
side of the door
Comes with 4030T-3054
Hold-open clip
Optional
Installation Accessories
4030T-3054
Hold-Open Clip
n
n
n
Mounts in track to provide holdopen function
old-open point controlled by
H
clip location
Requires 4030T-3034H
35
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4030T
Series
Ordering Information
How-to-order 4030T Series closers
Closer will be shipped with:
- Standard cylinder
- Standard metal cover
- Standard track
- Standard arm
- Track roller
- Wood and self-tapping machine screw pack
1. Select finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary,
Light Bronze, Black, Brass.
unless options listed below are selected.
Closer options
Finish
Custom Powder Coat (RAL) ___________
Plated Finish, US ______________
SRI primer (use with powder coat
finishes only)
Optional Screw Packs
TB*, Wood & Machine Screw (TBWMS)
Track
Hold-open (H)
Table of sizes
n
Non-sized 4031T cylinder is adjustable from sizes 1 to 3 and is shipped set to size 3.
Interior door width
26˝
30˝
38˝
660mm
762mm
965mm
4031T
size 2
size 3
Minimum door width
Indicates recommended range of door width for closer size.
Reduced opening force 4030T Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to AUTOMATIC OPERATORS section for
information on systems that meet reduced
opening force requirements without effecting
closing power.
DOOR WIDTH
36˝
42˝
48˝
8.5* lbs.
N/A
N/A
N/A
5.0* lbs.
4031T
4031T
4031T
* Maximum opening force.
36
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4040XP
Series
Features
The 4040XP is LCN’s most durable and flexible heavy duty closer designed for institutional
and other demanding high traffic applications.
Certifications
Body Construction
Cover
Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
n
n
n
n
n
n
Cast Iron Body
Full Complement Bearings
1-1/2˝ Diameter Piston
3/4˝ Diameter Double Heat Treated
Pinion Journal
Fasteners
Self Reaming and Tapping Screws (SRT)
Mounting
Hinge (Pull Side), Top Jamb (Push Side),
Parallel Arm (Push Side)
Arms
Regular Arm
Finishes/Colors/
Powder Coat
n
Fluid
All Weather Liquid X Fluid
Handing
Non-Handed
n
Templating
Peel-n-Stick templates 2-1/4˝ x 5˝ Mounting Hole Pattern
n
Size
Adjustable Spring Size 1-6, includes Patented
Green Dial
Warranty
30 years
n
n
n
n
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
ptional SRI primer - powder coat only
O
Optional plated finishes
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
*ARM FUNCTION
CYLINDER
RE
GU
L
ST AR
AN (DO
DA UB
HO RD LE)
LD (SIN
G
FU OPE LE)
N
SI
BL
ED E L
IN
A/
K
H
CU EDA
SH
/
SC HCU
US SH
H
DO /SH
UB CU
LE SH
EG
RE
SS
COVER
-H
NO AN
N- DED
S
AC IZE
CE D
S
DE SIB
LA
I
YE LIT
Y
AV D AC
TIO
B*
*
N*
**
AS
T
M IC
ET
AL
HI
NG
E
TO (PU
LL
P
)S
J
ID
TO AM
E
B
P
JA (PU
PA MB LL)
RA
(P
U
L
ST LEL SH)
OP AR
FA M
CE
PO
W
D
PL ER C
AT
O
ED AT
FINISH
NO
N
MOUNTING
180°
AVAILABLE
NOT AVAILABLE
n
n
PL
Special
Templates
Plastic, Standard
Metal, Optional
180°
180° 110° 110°
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening/hold-open point with standard template.
** Advanced Variable Backcheck.
*** Delay feature incorporates standard 4040 cylinder (not XP).
37
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4040XP
Series
Mounting details
Hinge (Pull Side)
Mounting
10-7/16"
625 mm
2-1/4"
57 mm
11"
279 mm
12-1/4"
311 mm
5/8"
16 mm
3/4"
19 mm
2-11/16"
68 mm
3-1/2"
89 mm
3-3/4"
95 mm
4040XP-18
Butt Hinges
n
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
n
Recommended at hold-open point or where a door cannot swing beyond 120°
Reveal
n
Should not exceed 3/4˝ (19 mm) for regular arm or hold-open arm
Top Rail
n
Less than 3-3/4˝ (95 mm) requires PLATE, 4040XP-18. Plate requires 2˝ (51 mm) minimum
Clearance
n
2-3/8˝ (60 mm) behind door required for 90° installation
Delayed Action
n
n
n
Maximum Opening
n
n
Incorporates standard 4041 cylinder, without XP cylinder
Delays closing from 120° to 70°
Delay time adjustable up to approximately 1 minute
Templating allows up to 120°.
Hold-open points 90° up to 120° with hold-open arm.
38
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1-1/16"
27 mm
4040XP
Series
Mounting details
Top Jamb (Push Side)
Mounting
11/16"
17 mm
2-1/4"
57 mm
11"
279 mm
12-1/4"
311 mm
3-1/2"
89 mm
10-3/8"
264 mm
4040XP-18TJ
2-11/16"
68 mm
3/4"
19 mm
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point or where a door cannot swing beyond 120°
Reveal
Arm Type
Reveal
Max Opening
Regular Arm
2-9/16˝
Up to 120°
Long
4-13/16˝
Up to 120°
Hold-Open
2-9/16˝
Up to 120°
Long Hold-Open Arm
8˝
Up to 120°
n
n
n
Head Frame
n
n
Maximum Opening
n
n
Delayed Action
n
n
n
1-3/16"
30 mm
4040XP-18G
Butt Hinges
Top Rail
3-3/4"
95 mm
Requires 1-1/4˝ (32 mm) minimum
2-1/4˝ (57 mm) minimum with closer on PLATE, 4040XP-18TJ
3˝ (76 mm) minimum with closer on PLATE, 4040XP-18G
Less than 3-1/2˝ (89 mm) requires PLATE, 4040XP-18TJ
With flush ceiling, use PLATE, 4040XP-18G. Either plate requires 1-3/4˝ (44 mm) minimum
Templating allows up to 120°.
Hold-open points 85° up to 120° with hold-open arm.
Incorporates standard 4041 cylinder, without XP cylinder
Delays closing from 120° to 70°
Delay time adjustable up to approximately 1 minute
39
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4040XP
Series
Mounting details
Parallel Arm (Push Side)
Mounting
4"
102 mm
2-1/4"
57 mm
5-7/8"
149 mm
5-3/8"
137 mm
3-1/2"
89 mm
14-1/2"
368 mm
12-1/4"
311 mm
4-15/16"
125 mm
4"
102 mm
5-3/8"
137 mm
4040XP-18PA
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point, where the door cannot swing 180°, or where CUSH-N-STOP arm is not used
Reveal
Should not exceed 7/32˝ (6 mm)
Top Rail
Less than 5-3/8˝ (137 mm) measured from the stop requires PLATE,
4040XP-18PA. Plate requires 2˝ (51 mm) minimum from the stop
Head Frame
Flush or rabetted requires PA SHOE ADAPTER, 4040XP-419
Stop Width
Minimum 1˝ (25 mm). CUSH arm requires minimum 1-1/2˝ (38 mm)
Blade Stop
Clearance requires 1/2˝ (13mm) BLADE STOP SPACER, 4040XP-61.
Clearance
n
n
n
Delayed Action
n
n
n
Maximum Opening
n
n
4040XP-62PA shoe is 4˝ (102 mm) from door face.
EDA shoe projects 5-1/2˝ (140 mm) from door face.
CUSH shoe projects 6˝ (152 mm) from door face
Incorporates standard 4041 cylinder, without XP cylinder
Delays closing from 120° to 70°.
Delay time adjustable up to approximately 1 minute.
180° opening/hold-open points with all except CUSH arms
110° opening/hold-open with CUSH arms
Notes:
• Optional mounting requires PA SHOE, 4040XP-62PA for regular or HOLD-OPEN arms
• Add prefix “P” to closer description (eg. P4040XP)
• P4040XP closer includes 4040XP-201 FIFTH HOLE SPACER to support PA SHOE
40
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
EDA mount
4040XP
Series
4"
102 mm
5-1/4"
133 mm
3-1/2"
89 mm
2-1/4"
57 mm
B
A
14-1/16"
357 mm
12-1/4"
311 mm
Mounting details
EDA and CUSH
Mounting
5-1/4"
133 mm
4040XP-18PA
CUSH mount
4"
102 mm
B
5-1/4"
133 mm
3-1/2"
89 mm
2-1/4"
57 mm
14-1/16"
357 mm
A
6"
152 mm
12-1/4"
311 mm
5-1/2"
140 mm
4040XP-18PA
Clearance
4040XP-62EDA is 5-1/2˝ (140 mm) from door face. 6˝ (152 mm) for CUSH
Head Frame
Flush or rabetted requires CUSH FLUSH PANEL ADAPTER, 4040XP-419
CUSH ARM
Requires SHOE SUPPORT, 4040XP-30 for fifth screw anchorage for narrow frames
Delayed Action
n
n
Maximum Opening
Incorporates standard 4041 cylinder, without XP cylinder.
Delays closing from maximum opening to ; 115˚ with 180˚ template, 95˚ with 110˚ template, 85˚ with 100˚
template, 75˚ with 90˚ template. Delay time adjustable up to approximately 1 minute.
EDA arm can be templated for points at:
CUSH arms can be templated for
opening/hold-open point at:
110°:
A = 6-3/8˝ (162 mm)
B = 7-3/4˝ (197 mm)
85°:
A = 7-15/16˝ (202 mm)
B = 9-1/8˝ (232 mm)
or 180°: A = 2-7/8˝ (73 mm)
B = 4-1/4˝ (108 mm)
90°:
A = 7-3/16˝ (183 mm)
B = 8-1/2˝ (216 mm)
Hold-open points up to maximum opening
with HEDA arm
100°:
A = 6-1/16˝ (154 mm)
B = 7-1/4˝ (184 mm)
or 110°: A = 5-1/16˝ (129 mm)
B = 6-3/8˝ (162 mm)
Notes:
• 4040XP Series closers ordered with EDA or CUSH arms include 4040XP-201 FIFTH HOLE SPACER to support the shoe
• Spring Cush stop points are approximately 5˚ more than templated stop point
• Hold open at templated stop points
41
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4040XP
Series
Accessories
Cylinders
4040XP-3071
Cast Iron Cylinder Assembly
n
Non-handed
n
Heavy duty
Covers
4041-3071 DEL
Cast Iron Cylinder Assembly
Used for delayed action
closing
n
4040XP-72
Plastic Cover
4040XP-72MC
Metal Cover
I ncludes 4040XP-54 snap-on
cover clip
n
n
Non-handed
n
Non-handed
n
Heavy duty
n
Standard
n
n
n
Handed
equired for plated finishes and
R
custom powder coat finishes
Optional
Installation Accessories
4040XP-18
Plate
n
n
equired for hinge side mount
R
where top rail is less than 3-3/4˝
(95 mm)
Requires minimum 2˝
(51 mm) minimum top rail
n
n
4040XP-18PA
Plate
4040XP-18TJ
Plate
4040XP-18G
Plate
L ocates top jamb mounted
closer flush with top of head
frame face in flush ceiling
condition
equires 1-3/4˝ (44 mm)
R
minimum head frame
n
C enters top jamb mounted closer
vertically on head frame where
face is less than 3-1/2˝ (89 mm).
Plate requires 1-3/4˝ (44 mm)
minimum head frame
n
n
equired for parallel arm
R
mounting where top rail is
less than 5-1/2˝ (140 mm),
measured from the stop
equires 2˝ (51 mm) minimum
R
top rail
4040XP-62PA
PA Shoe
n
equired for parallel arm
R
mounting
42
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 5/16
Arms
4040XP
Series
4040XP-3077
Regular Arm
Non-handed
Non-handed
n
n
4040XP-3049
Hold-Open Arm
Non-handed
n
n
ounts pull side or top jamb
M
with shallow reveal, hold-open
adjustable shoe
040XP closer includes
4
4040XP-62PA shoe required for
parallel arm mounting
n
n
n
Optional
4040XP-3077EDA
Extra Duty Arm
Non-handed
n
Features forged, solid steel main
and forearm for potentially
abusive installations
I ncludes LONG HEAD AND TUBE,
4040XP-3048L for top jamb
mount
n
Optional
n
4040XP-3049EDA
Hold-Open Extra Duty Arm
Handed
n
Optional
n
arallel arm features forged,
P
solid steel main and forearm for
potentially abusive installations
Hold-open function is adjusted at
the shoe
n
n
4040XP-3049EDA/62G
Hold-Open Extra Duty Arm with 62G
Handed
Features forged, solid steel main
and forearm for potentially
abusive installations
2G shoe provides additional
6
blade stop clearance
Optional
Features forged, solid steel main
and forearm for potentially
abusive installations
Optional
n
4040XP-3077SCNS
Spring CUSH Arm
2G shoe provides additional
6
blade stop clearance. Hold-open
function is adjusted at the shoe
n
Features solid forged steel main arm
and forearm with stop in soffit shoe.
n
n
4040XP-3049CNS
HCUSH Arm
Non-handed
n
n
n
4040XP-3077CNS
Cush-N-Stop® Arm
Non-handed
n
n
Optional
n
old-open function with
H
templated stop/hold-open points
Handle controls hold-open
function
n
n
Optional
Optional
4040XP-3049SCNS
Spring HCUSH Arm
Non-handed
Non-handed
n
n
n
n I ncludes EXTRA LONG ROD AND
SHOE, 4040XP-79ELR for top
jamb mount with deep reveal
Optional
Non-handed
n
Optional
Non-handed
n
n
n
I ncludes LONG ROD AND SHOE,
4040XP-79LR for top jamb mount
n
4040XP-3077EDA/62G
Extra Duty Arm with 62G
n
n
n
4040XP-3049L
Long Hold-Open Arm
n
n
Non-handed
n
ounts pull side or top jamb
M
with shallow reveal P4041 closer
includes PA SHOE, 4040XP-62PA
required for parallel arm mounting
Accessories
4040XP-3077ELR
Extra Long Arm
4040XP-3077L
Long Arm
F or abusive applications features
solid forged steel main arm and
forearm with spring loaded stop in
the soffit shoe
n
Optional
n
F or abusive applications features
solid forged steel main arm and
forearm with spring loaded stop in
the soffit shoe
Handle controls hold-open function
n
Optional
43
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4040XP
Series
Accessories
Installation Accessories cont.
4040XP-30
CUSH Shoe Support
n
n
rovides anchorage for fifth
P
screw used with CUSH arms,
where reveal is less than
3-1/16˝ (78 mm)
4040XP-61
Blade Stop Spacer
n
n
4040XP-419
PA Flush Panel Adapter
equired to lower parallel arm
R
shoe to clear 1/2˝ (13 mm)
blade stop
Optional
n
n
4040XP-62A
Auxiliary Shoe
rovides horizontal mounting
P
surface for parallel arm shoe on
single rabetted or flush frame
n
n
Optional
Optional
Requires a top rail of 7˝
(178 mm)
hoe replaces -62PA for
S
parallel arm mounting of
regular arm with overhead
holder/stop
Optional
n
4040XP-54
Snap-On Cover Clip
n
sed to secure 4040XP-72
U
Plastic Cover to cylinder body
44
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4040XP
Series
Ordering Information
How-to-order 4040XP Series closers
Closer will be shipped with:
- Standard cylinder
- Standard cover
- Regular arm
- Self-reaming and tapping screws
1. Select finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary,
Light Bronze, Black, Brass.
unless options listed below are selected.
Closer options
Optional Screw Packs
TB* w/Self-Reaming and Tapping (TBSRT)
Wood & Machine Screw (WMS)
TB*, Wood & Machine Screw (TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTRX)
* Specify door thickness if other than
1-3/4˝.
Arm
Cylinder
Delayed Action (4041 DEL)
Regular (REG)
Regular w/62PA (Rw/PA)
Regular w/62A (R/62A)
Long (LONG)
Extra Long (XLONG)
Hold-Open (H)
Hold-Open w/62PA (Hw/PA)
Long Hold-Open (HLONG)
Extra Duty Arm (EDA)
Extra Duty Arm with 62G (EDA/62G)
Hold Open Extra Duty Arm (HEDA)
(Handed)
Hold Open Extra Duty Arm with 62
(HEDA/62G)(Handed)
Cush-N-Stop (CUSH)
HCush-N-Stop (HCUSH)
Spring Cush (SCUSH)
Spring HCush (SHCUSH)
Cover
Metal (specify right or left hand) (MC)
Finish
Custom Powder Coat (RAL) ___________
(handed metal cover required)
Plated Finish, US ______________
(handed metal cover required)
SRI primer (use with powder coat finishes only)
Installation Accessories
Plate, 4040XP-18
Plate, 4040XP-18TJ
Plate, 4040XP-18G
Plate, 4040XP-18PA
CUSH Shoe Support, 4040XP-30
Blade Stop Spacer, 4040XP-61
Auxiliary Shoe, 4040XP-62A
PA Flush Panel Adapter, 4040XP-419
Special Template
ST- _________
Table of sizes
n
n
4040XP cylinders are adjustable from size 1 through size 6 and is shipped set to size 3
Closing power of 4040XP Series closers may be adjusted 50%
Exterior (and vestibule) door width
*4040XP
Interior door width
24˝
30˝
36˝
42˝
48˝
24˝
30˝
38˝
48˝
54˝
60˝
610mm
762mm
914mm
1067mm
1219mm
610mm
762mm
965mm
1219mm
1372mm
1524mm
size 3
size 4
size 5
size 6
*4040XP
Minimum door width
size 2
size 3
size 4
size 5
size 6
Minimum door width
Indicates recommended range of door width for closer size.
* Adjustable Size 1 thru 6.
Reduced opening force 4040XP Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for information on
systems that meet reduced opening force requirements
without effecting closing power.
DOOR WIDTH
36˝
42˝
48˝
8.5* lbs.
4040XP
4040XP
4040XP
5.0* lbs.
4040XP
4040XP
4040XP
* Maximum opening force.
45
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
46
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4040XPT
Series
Features
The 4040XPT is LCN’s most flexible heavy duty track closer designed specifically for
interior doors in institutional and other rugged high traffic applications.
Certifications
Body Construction
Cover
Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
n
n
n
n
n
n
Cast Iron Body
Full Complement Bearings
1-1/2˝ Diameter Piston
3/4˝ Diameter Double Heat Treated
Pinion Journal
Fasteners
Self Reaming and Tapping Screws (SRT)
Mounting
Pull side on door, pull side top jamb, push
side on door
Arms
Standard Arm and Track with Roller
Finishes/Colors/
Powder Coat
n
n
n
n
Fluid
All Weather Liquid X Fluid
Handing
Non-Handed
Size
Adjustable Spring Size 1-4
Warranty
30 years
n
n
n
n
ptional SRI primer - powder coat only
O
Optional plated finishes
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
MOUNTING
COVER
ND
ED
SI
AC ZE
CE D
S
DE SIB
LA ILI
T
Y
AV ED Y
AC
B
TI
O
HA
N-
N-
NO
NO
M
PL
AS
TI
C
ET
AL
W
PL DER
AT C
ED OA
T
*ARM FUNCTION
CYLINDER
N
FINISH
PO
HI
NG
E(
TO PUL
L)
P
SID
J
TO AM E
B
P
JA (PU
PA MB LL)
RA
(P
U
L
ST LEL SH)
OP AR
FA M
CE
n
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
RE
GU
L
ST AR
AN (DO
DA UB
HO RD LE)
LD (SIN
G
FU OPE LE)
N
SI
BL
ED E L
IN
A/
K
H
CU EDA
SH
/
SC HCU
US SH
H
DO /SH
UB CU
LE SH
EG
RE
SS
Special
Templates
Plastic, Standard
Metal, Optional
120° 110°
AVAILABLE
NOT AVAILABLE
95°
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening/hold-open point with standard template.
47
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4040XPT
Series
Mounting details
Hinge (Pull Side)
Mounting
2"
51 mm
1-7/16"
37 mm
22-3/4"
578 mm
3-11/16"
94 mm
7/16"
11 mm
12-1/4"
311 mm
3-1/2"
89 mm
1-1/4"
32 mm
2-1/4"
57 mm
4040XPT-18
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
n
n
n
Recommended at hold-open point or where a door cannot swing 120°
Optional track bumper assembly assists backcheck in cushioning the opening swing of the door
It is not intended to replace an auxiliary stop
Reveal
Should not exceed 1/8˝ (3 mm) for standard arm
Top Rail
Less than 3-3/4˝ (95 mm) requires PLATE, 4040XPT-18. Plate requires 1-13/16˝ (44 mm) minimum
Head Frame
Requires 1-1/4˝ (32 mm) minimum
Clearance
2-1/4˝ (57 mm) behind door required for 90° installation
Maximum Opening
n
n
Templating allows 120° with standard arm, limited to 110° when optional bumper is installed
Hold-open points at 85°, 90°, 95°, 100°, 105°, or 110°, depending on the clip location in track
Notes:
• Many track style door closers are capable of allowing 180° of door swing
• The majority of track style closers are at their weakest closing force in the 180° – 130° range
• Consult factory for applications where door must swing 180°
48
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1-1/16"
27 mm
4040XPT
Series
Mounting details
Top Jamb (Pull Side)
Mounting
4-3/8"
111 mm
3-1/2"
89 mm
12-1/4"
311 mm
1-1/16"
27 mm
4-1/16"
103 mm
2-5/8"
67 mm
22-3/4"
578 mm
1-1/4"
32 mm
2-1/4"
57 mm
4040XPT-18TJ
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
n
n
n
Recommended at hold-open point or where a door cannot swing 180°
Optional track bumper assembly assists backcheck in cushioning the opening swing of the door
It is not intended to replace an auxiliary stop
Reveal
Should not exceed 1/8˝ (3 mm)
Head Frame
Less than 3-7/8˝ (98 mm), requires PLATE, 4040XPT-18TJ. Plate requires 1-3/4˝ (44 mm) minimum
Clearance
1-1/4˝ (32 mm) behind door required for 180° installation
Maximum Opening
n
n
n
Templating allows 180° with standard track arm, limited to 110° with optional bumper installed
Consult factory if door will be held open at 180°
Hold-open points at 85°, 90°, 95°, 100°, 105° or 110° with hold-open tracks
Notes:
• Many track style door closers are capable of allowing 180° of door swing
• The majority of track style closers are at their weakest closing force in the 180° – 130° range
• Consult factory for applications where an exterior or large/heavy door must swing 180°
49
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4040XPT
Series
Mounting details
Stop Face (Push Side)
Mounting
4-5/8"
118 mm
22-3/4"
578 mm
3-1/2"
89 mm
12-1/4"
311 mm
2-1/4"
57 mm
1-1/4"
32 mm
2-7/16"
62 mm
5-1/4"
133 mm
4040XPT-18
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
n
n
n
Recommended at hold-open point or where a door cannot swing 120°
Optional track bumper assembly assists backcheck in cushioning the opening swing of the door
It is not intended to replace an auxiliary stop
Clearance
Projects 2-1/4˝ (57 mm) from face of door
Top Rail
n
n
Less than 5-1/4˝ (133 mm) measured from the stop, requires PLATE, 4040XPT-18
Plate requires 3-1/2˝ (89 mm) minimum
Stop Width
Minimum 1-1/4˝ (32 mm)
Maximum Opening
n
n
Templating allows 120° with standard track arm, limited to 110° with optional bumper tracks
Hold-open points at 85°, 90°, 95°, 100°, 105° or 110° with hold-open tracks
Notes:
• Many track style door closers are capable of allowing 180° of door swing
• The majority of track style closers are at their weakest closing force in the 180° – 130° range
• Consult factory for applications where door must swing 180°
50
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 5/16
5-1/4"
133 mm
1-1/16"
27 mm
4040XPT
Series
Accessories
Cylinder
Covers
4040XPT-3071
Cast Iron Cylinder Assembly
Non-handed
n
n
4040XPT-72MC
Metal Cover
4040XPT-72
Plastic Cover
Non-handed
n
Snap-on
n
n
Standard
n
n
Standard
n
Handed
equired for plated finishes and
R
custom powder coat finishes
Optional
Arms
4040XPT-3077DE
Double Egress Arm
4040XPT-3077T
Standard Arm
Non-handed
Handed
n
n
n
rm does not include track
A
roller
n
n
n
n
F or double egress doors and
frames
Does not include track roller
aximum reveal is 2-11/16˝
M
(68mm)
Optional
Tracks
4040XPT-3038
Standard Track
4040XPT-3038B
Standard Track with Bumper
Non-handed
n
Non hold-open
n
n
n
Will accept hold-open clip and/
or bumper assembly
n
n
4040XPT-3038H
Hold-Open Track
Non-handed
n
Non hold-open
n
4040XPT-3038HB
Hold-Open Track with Bumper
Non-handed
n
With hold-open clip installed
n
Non-handed
n
Will accept hold-open clip
n
Will accept bumper assembly
n
Optional
n
Optional
With hold-open clip and
bumper assembly installed
n
Optional
Standard
51
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4040XPT
Series
Accessories
Installation Accessories
4040XPT-18
Plate
n
equired for pull side (door
R
mount) installations where top
rail is less than 3-3/4˝ (95 mm)
- Requires minimum 1-3/4˝
(44 mm) top rail
n
4040XPT-18TJ
Plate
n
n
4040XPT-169
Track Bumper
equired for pull side top jamb
R
installations where head frame is
less than 3-7/8˝ (98 mm)
equires minimum 1-3/4˝
R
(44 mm) head frame
equired for push side (door
R
mount) installations where top
rail is less than 5-1/4˝ (133 mm)
measured from the stop
n
n
4040XPT-3054
Hold-Open Clip
ounts in track to assist
M
backcheck, does not replace
auxiliary stop
n
n
L imits maximum opening.
Consists of bumper, bumper post,
and mounting screw
Mounts in track to provide
hold-open function)
old-open point controlled by
H
clip location
Consists of clip and mounting
screws
n
n
equires 4040XPT-3034H
R
Hold-Open Track Roller
- Requires minimum 3-1/2˝
(89 mm) top rail
4040XPT-3034
Track Roller
n
uiet, low friction roller
Q
assembly
Shoulder dimension
“X” = 1/8˝ (3mm)
n
4040XPT-3034H
Hold-Open Track Roller
n
Quiet, low friction roller
assembly
Shoulder dimension
“X” = 1/8˝ (3mm)
n
52
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4040XPT
Series
Ordering Information
How-to-order 4040XPT Series closers
Closer will be shipped with:
- Standard cylinder
- Standard cover
- Standard arm
- Track roller
- Standard track
- Self-reaming and tapping screws
1. Select finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary,
Light Bronze, Black, Brass.
Closer options
unless options listed below are selected.
Specific Screw Pack
TB* w/Self-Reaming and Tapping Screws
(TBSRT)
Wood & Machine Screw (WMS)
TB*, Wood & Machine Screw (TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTORX)
* Specify door thickness if other than 1-3/4˝.
Cover
Metal (specify right or left hand) (MC)
Finish
Custom Powder Coat (RAL) ___________
(handed metal cover required)
Plated Finish, US ______________
(handed metal cover required)
SRI primer (use with powder coat finishes only)
Installation Accessories
Plate, 4040XPT-18
Plate, 4040XPT-18TJ
Track
Regular with Bumper (BUMPER)
Hold-Open (HO)
Hold-Open with Bumper (HBUMPER)
Special Template
ST- _________
Table of sizes
n
Non-Sized 4040XPT cylinder is adjustable from sizes 1 thru 4 and is shipped set to size 3
Interior door width
26˝
34˝
38˝
48˝
660mm
864mm
965mm
1219mm
size 2
4040XPT
size 3
size 4
Minimum door width
Indicates recommended range of door width for closer size.
Reduced opening force 4040XPT Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for information on
systems that meet reduced opening force requirements
without effecting closing power.
DOOR WIDTH
36˝
42˝
48˝
8.5* lbs.
N/A
N/A
N/A
5.0* lbs.
4040XPT
4040XPT
4040XPT
* Maximum opening force.
53
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
54
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4050
Series
Features
The 4050 Series cast aluminum closer is engineered for durability and built tough to excel
in the harsh environments of high frequency, high abusive traffic areas. Ideal for commercial
building applications and competitive specification situations that demand a combination of
quality, reliability and value. The cast aluminum door closer offers premium features like powder
coating, full complement bearing, All Weather Fluid and a 25 year warranty.
Certifications
Body Construction
Cover
Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
n
n
n
n
n
n
Cast Aluminum Body
Full Complement Bearings
1-1/2˝ Diameter Piston
11/16˝ Diameter Double Heat Treated
Pinion Journal
Fasteners
Self Reaming and Tapping Screws (SRT)
Mounting
Hinge (Pull Side), Top Jamb (Push Side),
Parallel Arm (Push Side)
Arms
Standard Regular Arm
Finishes/Colors/
Powder Coat
Fluid
All Weather Liquid X Fluid
Handing
Non-Handed
Templating
Peel-n-Stick templates 2-3/8˝ x 6-3/4˝ Mounting Hole Pattern
n
n
n
n
n
n
n
Size
Adjustable spring size 1-6
n
Warranty
25 years
n
ptional SRI primer - powder coat only
O
Optional plated finishes
RE
GU
L
ST AR
AN (DO
DA UB
HO RD LE)
LD (SIN
G
FU OPE LE)
N
SI
BL
ED E L
IN
A/
K
H
CU EDA
SH
/
SC HCU
US SH
H
DO /SH
UB CU
LE SH
EG
RE
SS
D
ZE
ND
SI
AC
N-
HA
NO
N-
*ARM FUNCTION
CYLINDER
CE
S
DE SIB
LA
I
YE LIT
Y
AV D AC
TIO
B
N
COVER
ED
FINISH
NO
HI
NG
E
TO (PU
LL
P
)S
J
ID
TO AM
E
B
P
JA (PU
M
L
PA
L
RA B (P )
US
LL
ST EL
H
OP AR )
FA M
CE
PO
W
D
PL ER C
AT
O
ED AT
MOUNTING
180°
AVAILABLE
NOT AVAILABLE
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
PL
AS
T
M IC
ET
AL
Special
Templates
Plastic, Standard
Metal, Optional
180°
180° 110° 110°
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening/hold-open point with standard template.
55
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4050
Series
Mounting details
Hinge (Pull Side)
Mounting
3/4"
19mm
B
2-11/16"
68mm
1-5/8"
41mm
11-15/16"
304mm
A
2-13/16"
72mm
3-7/8"
98mm
12-7/8"
327mm
CL
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point or where a door cannot swing beyond templated maximum opening
Reveal
Should not exceed 3/4˝ (19 mm) for regular arm or hold-open arm
Top Rail
n
n
Less than 3-7/8˝ (98 mm) requires PLATE, 4050-18.
Plate requires 1-13/16˝ (44 mm) minimum
Clearance
2-13/16˝ (72 mm) behind door required for 90° installation
Delayed Action
Delays closing from 180°-70°. Delay time adjustable up to approximately 1 minute
Maximum Opening
n
n
Templating allows up to 180°
Hold-open points up to maximum opening with hold-open arm
To 100°:
A = 6-15/16˝ (176mm)
B = 12-5/8˝ (321 mm)
100° to 120°:
A = 5-15/16˝ (151mm)
B = 11-5/8˝ (295 mm)
120° to 150°:
A = 3-15/16˝ (100 mm)
B = 9-5/8˝ 244 mm)
150° to 180°:
A = 3-7/16˝ (87mm)
B = 9-1/8˝ (232 mm)
56
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4050
Series
Mounting details
Top Jamb (Push Side)
Mounting
CL
3-7/8"
98mm
5/8"
16mm
A
2-13/16"
72mm
11-15/16"
303mm
2-11/16"
68mm
4-1/4"
108mm
3/4"
19mm
CL
B
12-7/8"
327mm
The 'A' dimension refers to the edge of the closer body to the center line of pivot or hinge.
The 'B' dimension refers to the edge of the closer shoe bracket to the center line of pivot or hinge.
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point or where a door cannot swing beyond templated maximum opening
Reveal
Arm Type
Reveal
Max Opening
Regular Arm
4˝
Up to 180°
Long
9˝
Up to 150°
Hold-Open
4˝
Up to 170°
Long Hold-Open Arm
8-3/4˝
Up to 155°
Top Rail
Requires 2˝ (51 mm) minimum.
Head Frame
Less than 3-7/8˝ (98 mm) requires plate.
Delayed Action
Delay closing from 180° to 70°. Delay time adjustable up to approximately 1 minute.
Maximum Opening
n
n
Templating allows up to 180°
Hold-open points up to maximum opening with hold-open arm
To 100°:
A = 6-7/8˝ (175 mm)
B = 12-11/16˝ (322 mm)
100° to 120°:
A = 5-7/8˝ (149 mm)
B = 11-11/16˝ (297 mm)
120° to 150°:
A = 3-7/8˝ (98 mm)
B = 9-11/16˝ (246 mm)
150° to 180°:
A = 3-3/8˝ (86 mm)
B = 9-3/16˝ (233 mm)
57
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4050
Series
Mounting details
Parallel Arm (Push) Side
Mounting
B
CL
4"
102 mm
5-3/4”
146 mm
2-13/16"
72 mm
3-7/8"
98 mm
4-1/8"
105 mm
15-1/2"
394 mm
12-7/8”
327 mm
CL
A
The 'A' dimension refers to the edge of the closer body to the center line of pivot or hinge.
The 'B' dimension refers to the edge of the closer shoe bracket to the center line of pivot or hinge.
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point, where the door cannot swing beyond templated maximum opening, or where
CUSH-N-STOP arm is not used
Top Rail
Less than 5-3/4˝ (146mm) measured from the stop requires PLATE, 4050-18PA. Plate requires 2-1/4˝ (57 mm)
minimum from the stop
Clearance
For 4050-62PA shoe is 4-1/8˝ (105 mm) from door face
Head Frame
Flush or rabetted requires PA SHOE ADAPTER, 4050-419
Stop Width
Minimum 1-3/16˝ (30 mm)
Blade Stop
Clearance requires 1/2˝ (13mm) BLADE STOP SPACER, 4050-61
Delayed Action
Delays closing from 180°-70°. Delay time adjustable up to approximately 1 minute
Auxiliary Shoe
4050-62A allows installation of regular arm with overhead holder/stop
Maximum Opening
To 100°:
A = 8-1/16˝ (205 mm)
B = 8-5/8˝ (219 mm)
100° to 130°:
A = 6-9/16˝ (167 mm)
B = 7-1/8˝ (181 mm)
130° to 150°:
A = 5-9/16˝ (141 mm)
B = 6-1/8˝ (156 mm)
150° to 180°:
A = 4-9/16˝ (116 mm)
B = 5-1/8˝ (130 mm)
Hold-open points up to maximum opening with hold-open arm
Note:
• Optional mounting requires PA SHOE, 4050-62PA for regular or HOLD-OPEN arms
58
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
EDA mount
B
4”
102 mm
4050
Series
CL
Mounting details
5-11/16”
145 mm
5-3/4”
146 mm
2-13/16”
72 mm
15-13/16”
402 mm
CL
EDA and CUSH
Mounting
3-7/8”
98 mm
12-7/8”
327 mm
A
CUSH mount
B
5-11/16”
145 mm
2-13/16”
72 mm
CL
CL
4”
102 mm
5-3/4”
146 mm
3-7/8”
98 mm
15-7/8”
403 mm
12-7/8”
327 mm
A
The 'A' dimension refers to the edge of the closer body to the center line of pivot or hinge.
The 'B' dimension refers to the edge of the closer shoe bracket to the center line of pivot or hinge.
Clearance
4050-62EDA is 5-11/16˝ (145mm) from door face. 5-11/16˝ (145mm) for CUSH
Head Frame
Flush or rabetted requires FLUSH PANEL ADAPTER, 4050-419
CUSH ARM
Requires CUSH SHOE SUPPORT, 4050-30 for fifth screw anchorage for narrow frames
Delayed Action
Delays closing from 180° to approximately 70°. Delay time adjustable up to approximately 1 minute.
Maximum Opening
EDA arm can be templated for points at: 100°
CUSH arms can be templated for
opening/hold-open point at:
100°:
A = 8-1/16˝ (205 mm)
B = 8-5/8˝ (219 mm)
85°:
A = 9-13/16˝ (250 mm)
B = 10-1/2˝ (267 mm)
100° to 130°: A = 6-9/16˝ (167 mm)
B = 7-1/8˝ (181 mm)
90°:
A = 8-15/16˝ (227 mm)
B = 9-5/8˝ (244 mm)
130° to 150°: A = 5-9/16˝ (141 mm)
B = 6-1/8˝ (156 mm)
95°:
A = 8-5/16˝ (212 mm)
B = 9˝ (229 mm)
150° to 180°: A = 4-9/16˝ (116 mm)
B = 5-1/8˝ (130 mm)
100°:
A = 7-11/16˝ (196 mm)
B = 8-3/8˝ (213 mm)
Hold-open points up to maximum opening
with HEDA arm
105°:
A = 7-1/16˝ (180 mm)
B = 7-3/4˝ (197 mm)
110°:
A = 6-9/16˝ (167 mm)
B = 7-1/4˝ (184 mm)
Notes:
• Spring Cush dead stop points are approximately 5˚ more than templated stop point
• Hold open at templated stop points
• 4050 Series closers ordered with EDA or CUSH arms include 4050-201 FIFTH HOLE SPACER to support the shoe
59
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4050
Series
Accessories
Cylinders
4050-3071
Cast Aluminum Cylinder
Assembly
n
n
Non-handed
Heavy duty
Covers
4050-3071 DEL
Cast Aluminum Cylinder
Assembly
4050-72
Plastic Cover
Cylinder used for delayed
action closing
n
Non-handed
n
n
Standard
n
n
n
Non-handed
n
Heavy duty
4050-72MC
Metal Cover
n
Non-handed
equired for plated finishes and
R
custom powder coat finishes
Optional
Installation Accessories
4050-18
Plate
n
n
equired for hinge side mount
R
where top rail is less than
3-7/8˝ (98 mm)
Requires minimum 1-3/4˝
(44 mm) top rail
4050-61
Blade Stop Spacer
n
equired to lower parallel arm
R
shoe to clear 1/2˝ (13 mm) blade
stop
4050-18G
Plate
n
n
4050-18PA
Plate
L ocates top jamb mounted
closer flush with top of head
frame face in flush ceiling
condition
n
C ontact LCN Product Support
for minimum head frame
requirement.
n
4050-419
Flush Panel Adapter
n
4050-30
Cush Shoe Support
equired for parallel arm
R
mounting where top rail is less
than 5-3/4˝ (146 mm), measured
from the stop
n
n
rovides anchorage for fifth
P
screw used with CUSH arms,
where reveal is less than
3-1/16˝ (78 mm)
equires 2-1/4˝ (57 mm)
R
minimum top rail
4050-62A
Auxiliary Shoe
rovides horizontal mounting
P
surface for parallel arm shoe on
single rabetted or flush frame
n
4050-62PA
PA Shoe
equires a top rail of 7-13/16˝
R
(198 mm)
n
equired for parallel arm
R
mounting
eplaces -62PA for parallel arm
R
mounting of regular arm with
overhead holder/stop
Optional
n
60
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Arms
4050
Series
Accessories
4050-3077
Regular Arm
Non-handed
Non-handed
n
I ncludes PA SHOE, 4050-62PA
required for parallel arm mounting
n
Non-handed
n
ounts pull side or top jamb with
M
shallow reveal
n
4050-3049
Hold-Open Arm
4050-3077L
Long Arm
n
I ncludes LONG ROD AND SHOE,
4050-79LR for top jamb mount
n
Optional
n
ounts pull side or top jamb with
M
shallow reveal
n
Hold-open adjustable shoe
n
050 closer includes 4050-62PA
4
shoe required for parallel arm
mounting
n
Optional
n
Non-handed
Non-handed
n
n
Features forged, solid steel main
and forearm for potentially
abusive installations
n
I ncludes LONG HEAD AND TUBE,
4050-3048L for top jamb mount
n
Handed
n
Hold-open adjustable shoe
n
4050-3049EDA
Hold-Open Extra Duty Arm
4050-3077EDA
Extra Duty Arm
4050-3049L
Long Hold-Open Arm
Hold-open function is adjusted at
the shoe
n
Optional
n
4050-3049EDA/62G
Hold-Open Extra Duty Arm With 62G
4050-3077EDA/62G
Extra Duty Arm With 62G
Non-handed
Handed
n
n
Features forged, solid steel main
and forearm for potentially
abusive installations
n
n
Features forged, solid steel main
and forearm for potentially
abusive installations
n
2G shoe provides additional
6
blade stop clearance for use with
additional door hardware such as
an overhead holder
Features forged, solid steel main
and forearm for potentially
abusive installations
2G shoe provides additional
6
blade stop clearance for use with
additional door hardware such as
an overhead holder
4050-3049CNS
HCUSH Arm
Non-handed
n
Features solid forged steel main
arm and forearm with stop in
soffit shoe
n
n
n
n
4050-3077CNS
Cush-N-Stop® Arm
n
rovides hold-open function with
P
templated stop/hold-open points
Handle controls hold-open function
Optional
n
Hold-open function is adjusted at
the shoe
n
61
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4050
Series
Accessories
Arms cont.
4050-3077SCNS
Spring CUSH Arm
Non-handed
n
n
F or abusive applications
features solid forged steel main
arm and forearm with spring
loaded stop in the soffit shoe
4050-3049SCNS
Spring HCUSH Arm
Non-handed
n
n
Optional
n
F or abusive applications
features solid forged steel
main arm and forearm with
spring loaded stop in the
soffit shoe
Handle controls hold-open
function
n
Optional
n
62
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4050
Series
Ordering Information
How-to-order 4050 Series closers
Closer will be shipped with:
- Standard cylinder
- Standard cover
- Tri pack arm (Rw/PA)
- Self-reaming and tapping screws
1. Select finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary,
Light Bronze, Black, Brass.
unless options listed below are selected.
Closer options
Arm
Cylinder
Delayed Action (4050 DEL)
Cover
Metal (specify right or left hand) (MC)
Finish
Custom Powder Coat (RAL) ___________
(handed metal cover required)
Plated Finish, US ______________
(handed metal cover required)
SRI primer (use with powder coat finishes only)
Optional Screw Packs
TB* w/Self-Reaming and Tapping (TBSRT)
Wood & Machine Screw (WMS)
TB*, Wood & Machine Screw (TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTRX)
* Specify door thickness if other than
1-3/4˝.
Regular (REG)
Long (LONG)
Hold-Open (H)
Hold-Open w/62PA (Hw/PA)
Long Hold-Open (HLONG)
Extra Duty Arm (EDA)
Extra Duty Arm with 62G (EDA/62G)
Hold Open Extra Duty Arm (HEDA)
(Handed)
Hold Open Extra Duty Arm with 62
(HEDA/62G)(Handed)
Cush-N-Stop (CUSH)
HCush-N-Stop (HCUSH)
Spring Cush (SCUSH)
Spring HCush (SHCUSH)
Installation Accessories
Plate, 4050-18
Plate, 4050-18G
Plate, 4050-18PA
CUSH Shoe Support, 4050-30
Blade Stop Spacer, 4050-61
Auxiliary Shoe, 4050-62A
Flush Panel Adapter, 4050-419
Special Template
ST- _________
Table of sizes
n
n
4050 cylinders are adjustable from size 1 through size 6 and is shipped set to size 3
Closing power of 4050 Series closers may be adjusted 50%
Exterior (and vestibule) door width
*4050
Interior door width
24˝
30˝
36˝
42˝
48˝
24˝
34˝
38˝
48˝
54˝
60˝
610mm
762mm
914mm
1067mm
1219mm
610mm
864mm
965mm
1219mm
1372mm
1524mm
size 3
size 4
size 5
size 6
*4050
Minimum door width
size 2
size 3
size 4
size 5
size 6
Minimum door width
Indicates recommended range of door width for closer size.
* Adjustable Size 1 thru 6.
Reduced opening force 4050 Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for information on
systems that meet reduced opening force requirements
without effecting closing power.
DOOR WIDTH
36˝
42˝
48˝
8.5* lbs.
4050
4050
4050
5.0* lbs.
4050
4050
4050
* Maximum opening force.
63
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
64
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4050T
Series
Features
The 4050T cast aluminum heavy duty track closer is designed for rugged high frequency
traffic areas. Ideal for commercial building applications and competitive specification
situations that demand a combination of quality, reliability and value.
Certifications
Body Construction
Cover
Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
n
n
n
n
n
n
n
Cast Aluminum Body
Full Complement Bearings
1-1/2˝ Diameter Piston
11/16˝ Diameter Double Heat Treated
Pinion Journal
Fasteners
Self Reaming and Tapping Screws (SRT)
Mounting
Pull side on door, pull side top jamb, push
side on door
Arms
Standard Arm and Track with Roller
Finishes/Colors/
Powder Coat
n
n
n
n
Fluid
All Weather Fluid
Handing
Non-Handed
Size
Adjustable Spring Size 1-4
Warranty
25 years
n
n
n
n
ptional SRI primer - powder coat only
O
Optional plated finishes
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
MOUNTING
COVER
ND
ED
SI
AC ZE
CE D
S
DE SIB
LA ILI
T
Y
AV ED Y
AC
B
TI
O
HA
N-
N-
NO
NO
M
PL
AS
TI
C
ET
AL
W
PL DER
AT C
ED OA
T
*ARM FUNCTION
CYLINDER
N
FINISH
PO
HI
NG
E(
TO PUL
L)
P
SID
J
TO AM E
B
P
JA (PU
PA MB LL)
RA
(P
U
L
ST LEL SH)
OP AR
FA M
CE
n
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
RE
GU
L
ST AR
AN (DO
DA UB
HO RD LE)
LD (SIN
G
FU OPE LE)
N
SI
BL
ED E L
IN
A/
K
H
CU EDA
SH
/
SC HCU
US SH
H
DO /SH
UB CU
LE SH
EG
RE
SS
Special
Templates
Plastic, Standard
Metal, Optional
180° 180°
AVAILABLE
NOT AVAILABLE
95°
Closer available with less than 5.0 lbs. opening force on 36˝ door (pull side and top jamb only).
* Maximum opening/hold-open point with standard template.
65
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 7/16
4050T
Series
Mounting details
Hinge (Pull Side)
Mounting
2"
52 mm
1-1/2"
38 mm
22-11/16"
577 mm
3-7/8"
98 mm
2-13/16"
72 mm
1-1/4"
32 mm
4-7/16"
113 mm
12-7/8"
327 mm
4-1/16"
104 mm
4050T-18
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
n
n
n
Recommended at hold-open point or where a door cannot swing 180°
Optional track bumper assembly assists backcheck in cushioning the opening swing of the door
It is not intended to replace an auxiliary stop
Reveal
Should not exceed 1/8˝ (3 mm) for standard arm
Top Rail
Less than 4-1/8˝ (104 mm) requires PLATE, 4050T-18. Plate requires 2-1/16˝ (52mm) minimum
Head Frame
Requires 1-1/4˝ (32 mm) minimum
Clearance
2-13/16˝ (52 mm) behind door required for 90° installation
Maximum Opening
n
Templating allows 180°
Notes:
• Many track style door closers are capable of allowing 180° of door swing
• The majority of track style closers are at their weakest closing force in the 180° – 130° range
• Consult factory for applications where door must swing 180°
66
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 7/16
1-1/16"
27mm
4050T
Series
Mounting details
Top Jamb (Pull Side)
Mounting
12-7/8"
327 mm
4-5/16"
109 mm
3-7/8"
98 mm
4-17/32" 1-1/16"
115 mm 27 mm
1-1/4"
32 mm
2-13-16"
72 mm
22-11/16"
577 mm
2-5/8"
67 mm
4050T-18G
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
n
n
n
Recommended at hold-open point or where a door cannot swing 180°
Optional track bumper assembly assists backcheck in cushioning the opening swing of the door
It is not intended to replace an auxiliary stop
Reveal
Should not exceed 1/8˝ (3 mm)
Head Frame
Less than 4-1/2˝ (114 mm), requires PLATE, 4050T-18G. Plate requires 2-1/16˝ (52 mm) minimum
Clearance
1-1/4˝ (32 mm) behind door required for 180° installation
Maximum Opening
n
Templating allows 180°
Notes:
• Many track style door closers are capable of allowing 180° of door swing
• The majority of track style closers are at their weakest closing force in the 180° – 130° range
• Consult factory for applications where an exterior or large/heavy door must swing 180°
67
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 7/16
4050T
Series
Mounting details
Stop Face (Push Side)
Mounting
22-11/16"
577 mm
5-11/16"
145 mm
1-1/2"
38 mm
2-13/16"
72 mm
4-5/8"
118 mm
3-7/8"
98 mm
1-11/16"
27 mm
12-7/8"
327 mm
4050T-18G
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
n
n
n
Recommended at hold-open point or where a door cannot swing 120°
Optional track bumper assembly assists backcheck in cushioning the opening swing of the door
It is not intended to replace an auxiliary stop
Clearance
Projects 2-9/16˝ (65 mm) from face of door
Top Rail
n
n
Less than 5-11/16˝ (144 mm) measured from the stop, requires PLATE, 4050T-18G
Plate requires 3-5/16˝ (84 mm) minimum
Stop Width
Minimum 1-1/4˝ (32 mm)
Maximum Opening
n
Templating allows 120°
Notes:
• Many track style door closers are capable of allowing 180° of door swing
• The majority of track style closers are at their weakest closing force in the 180° – 130° range
• Consult factory for applications where door must swing 180°
68
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 7/16
2-7/16"
62 mm
4050T
Series
Accessories
Cylinder
Covers
4050T-3071
Cast Aluminum Cylinder
Assembly
4050T-72
Plastic Cover
Non-handed
n
Non-handed
n
n
4050T-72MC
Metal Cover
n
Standard
n
Standard
n
n
Non-handed
equired for plated finishes and
R
custom powder coat finishes
Optional
Arms
4050T-3077DE
Double Egress Arm
4050T-3077T
Standard Arm
Non-handed
Handed
n
n
n
rm does not include track
A
roller
n
F or double egress doors and
frames
n
Does not include track roller
n
Maximum reveal is 3˝ (76 mm)
n
Optional
Tracks
4050T-3038
Standard Track
Non-handed
n
Non hold-open
n
n
n
Will accept hold-open clip and/
or bumper assembly
n
n
4050T-3038H
Hold-Open Track
4050T-3038B
Standard Track with Bumper
Non-handed
n
Non hold-open
n
4050T-3038HB
Hold-Open Track with Bumper
Non-handed
n
With hold-open clip installed
n
Non-handed
n
Will accept hold-open clip
n
Will accept bumper assembly
n
Optional
n
Optional
With hold-open clip and
bumper assembly installed
n
Optional
Standard
69
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 7/16
4050T
Series
Accessories
Installation Accessories
4050T-18
Plate
n
equired for pull side (door
R
mount) installations where top
rail is less than 4-1/8˝
n
- Requires minimum 2-1/16˝
top rail
equired for pull side top jamb
R
installations where head frame is
less than 4-1/2˝.
- Requires minimum 2-1/16˝ head
frame
n
4050T-3054
Hold-Open Clip
4050T-169
Track Bumper
4050T-18G
Plate
n
n
equired for push side (door
R
mount) installations where top
rail is less than 5-11/16˝ measured
from the stop
ounts in track to assist
M
backcheck, does not replace
auxiliary stop
n
n
L imits maximum opening.
Consists of bumper, bumper post,
and mounting screw
Mounts in track to provide
hold-open function)
old-open point controlled by
H
clip location
Consists of clip and mounting
screws
n
n
Requires 4050T-3034H
Hold-Open Track Roller
- Requires minimum 3-5/16˝
top rail
4050T-3034
Track Roller
n
uiet, low friction roller
Q
assembly
Shoulder dimension
“X” = 1/8˝ (3mm)
n
4050T-3034H
4050T-480
Hold-Open Track Roller
Pinion Extender
n
Quiet, low friction roller
assembly
n
Connects pinion to arm
Shoulder dimension
“X” = 1/8˝ (3mm)
n
70
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 7/16
4050T
Series
Ordering Information
How-to-order 4050T Series closers
Closer will be shipped with:
- Standard cylinder
- Standard cover
- Standard arm
- Track roller
- Standard track
- Self-reaming and tapping screws
1. Select finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary,
Light Bronze, Black, Brass.
Closer options
unless options listed below are selected.
Specific Screw Pack
TB* w/Self-Reaming and Tapping Screws
(TBSRT)
Wood & Machine Screw (WMS)
TB*, Wood & Machine Screw (TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTORX)
* Specify door thickness if other than 1-3/4˝.
Cover
Metal (MC)
Finish
Custom Powder Coat (RAL) ___________
(handed metal cover required)
Plated Finish, US ______________
(handed metal cover required)
SRI primer (use with powder coat finishes only)
Installation Accessories
Plate, 4050T-18
Plate, 4050T-18G
Track
Regular with Bumper (BUMPER)
Hold-Open (HO)
Hold-Open with Bumper (HBUMPER)
Special Template
ST- _________
Table of sizes
n
Non-Sized 4050T cylinder is adjustable from sizes 1 thru 4 and is shipped set to size 3
Interior door width
26˝
34˝
38˝
48˝
660mm
864mm
965mm
1219mm
size 2
4050T
size 3
size 4
Minimum door width
Indicates recommended range of door width for closer size.
Reduced opening force 4050T Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for information on
systems that meet reduced opening force requirements
without effecting closing power.
DOOR WIDTH
36˝
42˝
48˝
8.5* lbs.
N/A
N/A
N/A
5.0* lbs.
4050T
4050T
4050T
* Maximum opening force. Applies to pull side and top jamb only.
71
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 7/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
72
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 7/16
4110
Series
Features
The 4110 is LCN’s best performing heavy duty closer designed specifically for institutional
and other rugged high traffic applications.
n
n
n
n
Cast Iron Body
Full Complement Bearing
1-1/2˝ Diameter Piston
11/16˝ Diameter Double Heat Treated
Pinion Journal
Fluid
All Weather Fluid
Handing
Handed
Templating
Peel-n-Stick templates 2-1/2˝ x 6˝ Mounting Hole Pattern
Self Reaming and Tapping Screws (SRT)
Mounting
Parallel Arm (Push Side)
Arms
Extra-Duty arm
Finishes/Colors/
Powder Coat
n
n
n
n
n
Adjustable Spring Size 1-5, or Sized 6, Includes
Patented Green Dial
n
30 years
n
Special
Templates
n
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
ptional SRI primer - powder coat only
O
Optional plated finishes
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
RE
GU
L
ST AR
AN (DO
DA UB
HO RD LE)
LD (SI
NG
LE
FU OPE
)
N
SI
BL
E
ED
LI
A/
N
HE K
CU DA
SH
/
SC HCU
US SH
H
DO /SH
UB CU
S
LE
EG H
RE
SS
IL
IT
Y
Y
AV ED
AC
B
TI
ON
SI
B
CE
S
DE
AC
LA
D
ZE
ND
N-
SI
HA
C
AL
ST
I
*ARM FUNCTION
CYLINDER
ED
COVER
ET
HI
NG
E(
TO PUL
L)
P
SID
J
TO AM E
B
P
JA (PU
PA MB LL)
RA
(P
U
L
ST LEL SH)
OP
AR
FA M
CE
PO
W
D
PL ER C
AT
O
ED AT
FINISH
N-
MOUNTING
M
Warranty
Plastic, Standard
Metal, Optional
Fasteners
n
PL
A
Size
n
n
NO
Body Construction
Cover
Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
NO
Certifications
180° 180° 110° 110°
AVAILABLE
NOT AVAILABLE
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening/hold-open point with standard template.
73
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4110
Series
Mounting details
Parallel Arm (Push
Side) Mounting
4"
102 mm
5-1/8”
130 mm
3-1/2"
89 mm
2-1/4"
57 mm
B
14-1/16"
357 mm
A
5-1/2"
140 mm
12-1/4"
311 mm
5-1/8"
130 mm
4110-18
CL
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point, where a door cannot swing 180°, or where CUSH-N-STOP arm is not used
Clearance
EDA, or CUSH shoe is 5-1/2˝ (140 mm) from door face
Top Rail
n
n
Less than 5-1/8˝ (130 mm) measured from stop requires PLATE, 4110-18
Plate requires 2˝ (51 mm) minimum measured from the stop
Stop Width
Minimum 1˝ (25 mm)
Head Frame
Flush or rabetted requires CUSH FLUSH PANEL ADAPTER, 4110-419
Reveal
Less than 2-3/4˝ (70 mm), use CUSH SHOE SUPPORT, 4110-30 with CUSH arms
Blade Stop Spacer
4110-61 required to clear 1/2˝ (13 mm) blade stop
Crush Arm
Requires CUSH SHOE SUPPORT, 4110-30 for fifth screw anchorage with CUSH arms
Delayed Action
n
n
n
Advanced Variable
Backcheck
Maximum opening
n
n
Add suffix “DEL” to selected cylinder (eg. 4111 DEL)
Not available with 4116 cylinder. Delays closing from maximum opening to approximately 70°
Delay time adjustable up to approximately 1 minute
Cylinder starts backcheck at approximately 45° instead of the normal 75°
Add suffix “AVB” to selected cylinder
EDA or Fusible Link arm can be templated for
100° A = 5-15/16˝ (151 mm)
B = 7-1/4˝ (184 mm)
CUSH arm can be templated for maximum opening at
85°
A = 8-5/16˝ (211 mm)
B = 9-5/8˝ (244 mm)
140°
90°
A= 4-7/16˝ (113 mm)
B = 5-3/4˝ (146 mm)
or 180° A= 2-15/16˝ (75 mm)
B = 2-15/16˝ (75 mm)
n
or 110° A= 5-9/16˝ (141 mm)
B = 6-7/8˝ (175 mm)
Hold-open points up to maximum opening with
HEDA or Fusible Link arm
74
A= 7-11/16˝ (195 mm)
B = 9˝ (229 mm)
old-open point at maximum opening with
n H
HCUSH arm
n Spring Cush hold-open points are approximately
5˚ less than templated stop point
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4110
Series
Accessories
Cylinder
Covers
Left hand shown
4111(6)-3071
Cast Iron Cylinder Assembly
4110-72MC
Metal Cover
4110-72
Plastic Cover
n
Handed
n
Non-handed
n
n
Standard
n
Standard
n
n
Handed
equired for plated finishes and
R
custom powder coat finishes
Optional
Arms
n
Handed
Handed
n
Optional
n
n
4110-3077CNS
Cush-N-Stop Arm
4110-3049FL
Fusible Link Arm
4110-3049EDA
Hold-Open Arm
rovides hold-open function,
P
adjustable at shoe
n
n Releases hold-open function
adjustable at shoe when
exposed to temperatures
above 165° F
n
Non-handed
Features solid forged steel
main arm and forearm with
built-in stop in soffit shoe
n
Optional
NOTE: Check local codes before
specifing FL arms. NOT A life safety
product!
4110-3077EDA
Extra Duty Arm
n Non-handed
n Features forged, solid
steel main and forearm
for potentially abusive
installations
4110-3077EDA/ 62G
Extra Duty Arm
n
Non-handed
n Features forged, solid
steel main and forearm
for potentially abusive
installations
n
ptional 4110-62G thick hub
O
shoe for blade stop clearance
75
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4110
Series
Accessories
Arms
4110-3049CNS
HCUSH Arm
Non-handed
n
n
rovides hold-open function
P
with templated stop/ holdopen points.
Handle controls hold-open
function
4110-3077SCNS
Spring CUSH Arm
n
n
n
n
4110-3049SCNS
Spring HCUSH Arm
Non-handed
n
F or abusive applications
features solid forged steel main
arm and forearm with spring
loaded stop in the soffit shoe
n
Optional
Non-handed
F or abusive applications
features solid forged steel main
arm and forearm with spring
loaded stop in the soffit shoe
Handle controls hold-open
function
n
n
Optional
Installation Accessories
4110-18
Plate
n
n
equired for push side mount
R
where top rail is less than 5-1/8˝
(130 mm), measured from the
stop
n
4110-419
PA Flush Panel Adapter
4110-61
Blade Stop Spacer
4110-30
CUSH Shoe Support
rovides anchorage for fifth screw
P
used with CUSH arm, where reveal
is less than 3-1/16˝ (78 mm)
n
L owers parallel arm shoe to clear
1/2˝ (13 mm) blade stop
n
rovides horizontal mounting
P
surface for CUSH shoe on single
rabetted or flush frame
equires minimum 2˝ (51 mm)
R
minimum top rail
76
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4110
Series
Ordering Information
How-to-order 4110 Series closers
Closer will be shipped with:
- Standard cylinder
- Standard cover
- Extra duty arm
- Self-reaming and tapping screws
1. Specify cylinder size
4111 (adjustable from size 1 to 5)
4116 (DEL, SHCUSH or HCUSH arm not available)
2. Specify hand
RH
LH
3. Select finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass
unless options listed below are selected.
Closer options
Cylinder
Delayed Action (DEL) (not available with 4116)
Advanced Variable Backcheck (AVB)
Cover
Metal (MC)
Finish
Custom Powder Coat (RAL) ___________
(handed metal cover required)
Plated Finish, US ______________
(handed metal cover required)
SRI primer (use with powder coat finishes only)
Specify Arm
Hold-Open Extra Duty (HEDA)
Fusible Link,165° F (FL)
Cush-N-Stop (CUSH)
H-Cush-N-Stop (n/a with 4116 cylinder)
(HCUSH)
Spring Cush (SCUSH)
Spring H-Cush (n/a with 4116 cylinder)
(SHCUSH)
Extra Duty (EDA)
H-Extra Duty (HEDA)
Screw Packs
TB*, Self-Reaming & Tapping (TBSRT)
Wood & Machine Screw (WMS)
TB*, Wood & Machine Screw (TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTRX)
* Specify door thickness if other than 1-3/4˝.
Installation Accessories
Plate, 4110-18
CUSH Shoe Support, 4110-30
Blade Stop Spacer, 4110-61
PA Flush Panel Adapter, 4110-419
Special Template
ST- _________
Table of sizes
n
n
n
n
n
Select closer based on width of door.
The spring power of non-sized 4111 cylinder is adjustable from size 1 through size 5 and is shipped set to size 3.
Sized 4116 series cylinders 6.
Delayed action not available with 4116 cylinder
H - CUSH and SPRING H-CUSH arm not available with 4116 cylinder.
Exterior (and vestibule) door width
*4111
4116
Interior door width
28˝
30˝
36˝
42˝
48˝
28˝
34˝
38˝
48˝
54˝
60˝
711mm
762mm
914mm
1067mm
1219mm
711mm
864mm
965mm
1219mm
1372mm
1524mm
size 3
size 4
size 5
size 6
size 2
*4111
4116
Minimum door width
size 3
size 4
size 5
size 6
Minimum door width
Indicates recommended range of door width for closer size.
* Adjustable Size 1 thru 5.
Reduced opening force 4110 Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to AUTOMATIC OPERATORS section for information
on systems that meet reduced opening force requirements
without effecting closing power.
DOOR WIDTH
36˝
42˝
48˝
8.5* lbs.
4111
4111
4111
5.0* lbs.
4111
4111
4111
* Maximum opening force.
77
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
78
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4110T
Series
Features
The 4110T is LCN’s best performing heavy duty track closer designed specifically for interior
doors in institutional and other high traffic applications.
Body Construction
Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
n
n
n
n
Cast Iron Body
Full Complement Bearing
1-1/2˝ Diameter Piston
11/16˝ Diameter Double Heat Treated
Pinion Journal
Fluid
All Weather Fluid
Handing
Handed
Size
Adjustable Spring Size 1-5, or Sized 6.
Includes Patented Green Dial
Warranty
30 years
n
n
Plastic, Standard
Metal, Optional
Fasteners
Self Reaming and Tapping Screws (SRT)
Mounting
Stop Face (Push Side)
Arms
Standard Arm and Track with Roller
Finishes/Colors/
Powder Coat
n
n
n
n
n
n
n
n
n
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
ptional SRI primer - powder coat only
O
Optional plated finishes
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
TI
C
AL
COVER
ET
AS
M
PO
W
D
PL ER C
AT
O
ED AT
HI
NG
E(
TO PUL
L)
P
SID
J
TO AM E
B
P
JA (PU
PA MB LL)
RA
(P
U
L
ST LEL SH)
OP
AR
FA M
CE
FINISH
*ARM FUNCTION
CYLINDER
NO
NH
NO AN
N- DED
S
AC IZE
CE D
S
DE SIB
LA ILI
TY
Y
AV ED
A
B
CT
IO
N
MOUNTING
PL
Special
Templates
Cover
RE
GU
L
ST AR
AN (DO
DA UB
HO RD LE)
LD (SI
NG
LE
FU OPE
)
N
SI
BL
ED E L
IN
A/
K
H
CU EDA
SH
/
SC HCU
US SH
H
DO /S
UB HCU
LE
S
EG H
RE
SS
Certifications
110° 100°
AVAILABLE
NOT AVAILABLE
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening/hold-open point with standard template.
79
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4110T
Series
Mounting details
Stop face (Push Side)
Mounting
1-7/16"
37 mm
2"
51 mm
22-3/4"
578 mm
3-11/16"
94 mm
7/16"
11 mm
12-1/4"
311 mm
3-1/2"
89 mm
1-1/4"
32 mm
2-1/4"
57 mm
4110T-18
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
n
n
n
Recommended at hold-open point or where a door cannot swing 110°.
Optional track bumper assembly assists backcheck in cushioning the opening swing of the door
It is not intended to replace an auxiliary stop
Clearance
Projects 2-1/4˝ (57 mm) from face of door
Top Rail
n
n
Less than 5-1/4˝ (133 mm) measured from the stop, requires PLATE, 4110T-18
Plate requires 2-1/4˝ (57 mm) minimum
Stop Width
Minimum 1-1/4˝ (32 mm)
Maximum Opening
n
n
Templating allows 110° with standard track arm, limited to 100° with optional bumper tracks
Variable hold-open angles with infinite options
Notes:
• Many track style door closers are capable of allowing 180° of door swing
• The majority of track style closers are at their weakest closing force in the 180° – 130° range
• Consult factory for applications where door must swing 180°
80
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1-1/16"
27 mm
4110T
Series
Accessories
Cylinder
Covers
4111(6)T-3071
Cast Iron Cylinder Assembly
4110T-72
Plastic Cover
4110T-72MC
Metal Cover
n
Handed
n
Non-handed
n
n
Standard
n
Standard
n
n
Handed
equired for plated finishes and
R
custom powder coat finishes
Optional
Arm
4110T-3077T
Standard
n
Handed
n
Roller not included with arm
Tracks
4110T-3038H
Hold-Open Track
4110T-3038B
Standard Track with Bumper
4110T-3038
Standard Track
4110T-3038HB
Hold-Open Track with Bumper
n
Non-handed
n
Non-handed
n
Non-handed
n
n
Non hold-open
n
Non hold-open
n
With hold-open clip installed
n
n
Will accept bumper assembly
n
Optional
Will accept hold-open clip and/
or bumper assembly
n
n
Standard
n
ith bumper assembly
W
installed
n
Will accept hold-open clip
n
Optional
n
fax: 800-248-1460
n
www.allegion.com/us
With hold-open clip and
bumper assembly installed
n
Optional
81
LCN Door Control Catalog
phone: 877-671-7011
Non-handed
n
009426 rev. 2/16
4110T
Series
Accessories
Installation Accessories
4110T-18
Plate
n
n
4110T-3054
Hold-Open Clip
4110T-169
Track Bumper
equired where top rail, when
R
measured from the stop, is less
than 5-1/4˝ (133 mm)
n
equires minimum 2-1/4˝
R
(57 mm) minimum top rail
n
ounts in track to assist
M
backcheck, not replace auxiliary
stop
n
n
L imits maximum opening.
Consists of bumper, bumper post,
and mounting screw
4110T-3034
Track Roller
Mounts in track to provide holdopen function
old-open point controlled by clip
H
location
n
n
uiet, low friction roller
Q
assembly
houlder dimension “X” = 1/16˝
S
(2 mm)
Consists of clip and mounting
screws
n
n
equires 4110T-3034H Track
R
Roller
4110T-3034H
Track Roller
n
n
Quiet, low friction roller assembly
houlder dimension “X” = 1/16˝
S
(2mm)
Spring-loaded hold-open
mechanism
n
82
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4110T
Series
Ordering Information
How-to-order 4110T Series closers
Closer will be shipped with:
- Standard cover
- Standard arm
- Track roller
- Standard track
- Self-reaming and tapping screws
1. Specify cylinder size
4111T (ADA)
4113T
4114T
2. Specify hand
RH
LH
unless options listed below are selected.
3. Select finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass
Closer options
Specify Track
Standard with Bumper (BUMPER)
Hold-Open (HO)
Hold-Open with Bumper (HBUMPER)
Cover
Metal (MC)
Finish
Custom Powder Coat (RAL) ___________
(handed metal cover required)
Plated Finish, US ______________
(handed metal cover required)
SRI primer (use with powder coat finishes only)
Specify Screw Packs
TB* w/Self-Reaming and Tapping (TBSRT)
Wood & Machine Screw (WMS)
TB*, Wood & Machine Screw (TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTRX)
* Specify door thickness if other than 1-3/4˝.
Installation Accessories
Plate, 4110T-18
Special Template
ST- _________
Table of sizes
n
n
n
n
Select closer based on width of door
Sized 4110T series cylinders available in size 1, 3 or 4
Closing power of all 4110T Series closers may be increased 15%
Specify next higher size closer where strong drafts exist
Interior door width
26˝
34˝
38˝
48˝
660mm
864mm
965mm
1219mm
size 1
4113T
size 3
size 4
4114T
Minimum door width
Indicates recommended range of door width for closer size.
Reduced opening force 4110T Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for information on
systems that meet reduced opening force requirements
without effecting closing power.
DOOR WIDTH
36˝
42˝
48˝
8.5* lbs.
N/A
N/A
N/A
5.0* lbs.
4111T
4111T
4111T
* Maximum opening force.
83
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
84
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4000T
Series
Features
The 4000T is a heavy duty closer to reliably control fire and smoke barrier doors with
maximum swing of 90°. Designed for use with an SEM 7850 wall magnet.
Certifications
Body Construction
Cover
Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
n
n
n
n
n
n
Cast Iron Body
Full Complement Bearing
1-1/2˝ Diameter Piston
3/4˝ Diameter Double Heat Treated
Pinion Journal
Fasteners
Wood and machine screw pack
Mounting
In a wall pocket, hinge side
Arms
Standard Arm and Track with Roller
Finishes/Colors/
Powder Coat
n
n
n
n
Fluid
All Weather Fluid
Handing
Non-Handed
Size
Sized 3 or 4
Warranty
30 years
n
n
n
n
n
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
ptional SRI primer - powder coat only
O
Optional plated finishes
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
*ARM FUNCTION
CYLINDER
RE
GU
L
ST AR
AN (DO
DA UB
HO RD LE)
LD (SI
NG
LE
FU OPE
)
N
SI
BL
ED E L
IN
A/
HE K
CU DA
SH
/
SC HCU
US SH
H
DO /S
UB HCU
LE SH
EG
RE
SS
ET
PL
AS
T
IC
AL
COVER
NO
NH
NO AN
N- DED
S
AC IZE
CE D
S
DE SIB
LA ILI
TY
Y
AV ED
A
B
CT
IO
N
FINISH
HI
NG
E(
TO PUL
L)
P
SID
J
TO AM E
B
P
JA (PU
PA MB LL)
RA
(P
U
L
ST LEL SH)
OP
AR
FA M
CE
PO
W
D
PL ER C
AT
O
ED AT
MOUNTING
M
Special
Templates
Plastic, Standard
Metal, Optional
90°
AVAILABLE
NOT AVAILABLE
* Maximum opening/hold-open point with standard template.
85
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4000T
Series
Mounting details
Wall pocket mounting
1
2-1/4"
57 mm
12-1/4"
311 mm
X
RECOMMENDED
POCKET DEPTH
1-1/4"
32 mm
1-1/16"
27 mm
2
3-1/2"
89 mm
OF PIVOT POINT (BY OTHERS)
VIEW OF CLOSER
WITH DOOR CLOSED
3
22-3/4"
578 mm
DEPTH OF POCKET AT
MAGNET MOUNTING LOCATION = X
LCN MODEL
SEM 7830
SEM 7840
SEM 7850
Butt Hinges
n
n
Pocket Depth
n
n
Wall Magnet
Dimension 1
n
n
n
Dimension 2
n
n
n
n
n
Dimension 3
n
n
n
n
Maximum Opening
X
4-1/16"
103 mm
2-7/16"
62 mm
3-7/16"
87 mm
Pocket Pivot, Total Door Hinge or Center Pivot are door mounting options
Should not exceed 5˝ (127 mm)
See above table for distance required between door and closer mounting location
This dimension is measured from the cylinder mounting surface to the pull side face of the door at 90°
n SEM 7850 is recommended. Use of other magnets may require special construction to alter the depth of the pocket
at the magnet location
n See Fire Life Safety Section
n
n
n
1-9/16"
40 mm
The distance from the centerline of the closer shaft to the centerline of the hinge or pivot
For pocket pivot or total door hinge, 9-1/2˝ (241 mm)
For butt hinge 8˝ (203 mm)
For center pivot 10˝ (254 mm)
The distance from the centerline of the pivot or hinge to the cylinder mounting surface
For pocket pivot 4-1/2˝ (114 mm)
For total door hinge 3-7/8˝ (98mm)
For butt hinge 2-7/8˝ (73 mm)
For center pivot 4-1/2˝ (114 mm)
The distance from the centerline of the pivot or hinge to end of the track
For pocket pivot or total door hinge, 3-7/8˝ (98mm)
For butt hinge 2-3/8˝ (60mm)
For center pivot 4-5/8˝ (117mm)
Templating allows 90° only
Hold-open point 90° with magnet
Notes:
• Cylinder mounts on wall
• Track mounts on hinge side of door
86
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4000T
Series
Accessories
Cylinder
Covers
4003(4)T-3071
Cast Iron Cylinder Assembly
4000T-72
Plastic Cover
4000T-72MC
Metal Cover
n
Non-handed
n
Non-handed
n
n
Standard
n
Standard
n
n
Handed
equired for plated and custom
R
powder coat finishes
Optional
Arm
4000T-3077T
Standard Arm
n
Non-handed
n
Roller not included with arm
Tracks
4000T-3034
Track Roller
4000T-3038
Standard Track
n
Non-handed
n
Non hold-open
n
Will not accept hold-open clip
or bumper assembly
n
n
n
uiet, low friction roller
Q
assembly
houlder Dimension “X”= 1/8˝
S
(3 mm)
Standard
87
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4000T
Series
Ordering Information
How-to-order 4000T Series closers
Closer will be shipped with:
- Standard cylinder
- Standard cover
- Standard arm
- Track roller
- Standard track
- Self-reaming and tapping screws
1. Select cylinder size
4003T
4004T
2. Select finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass
unless options listed below are selected.
Closer options
Specify Screw Packs
TB*, Wood & Machine Screw (TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTRX)
* Specify door thickness if other than 1-3/4˝.
Cover
Metal (MC)
Finish
Custom Powder Coat (RAL) ___________
(handed metal cover required)
Plated Finish, US ______________
(handed metal cover required)
SRI primer (use with powder coat finishes only)
Special Template
ST- _________
Table of sizes
n
n
n
Select closer based on width of door
4000T Series cylinders available in size 3 or 4
Closing power of 4000T Series closers is not adjustable
Interior door width
28˝
34˝
38˝
42˝
48˝
711mm
864mm
965mm
1067mm
1219mm
size 3
4003T
size 4
4004T
Minimum door width
Indicates recommended range of door width for closer size.
88
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1000 Series
surface
mounted
closers
Product selection guide
Surface mounted 1000 Series LCN closers feature a modern slim line design for easy installation on
narrow head frames and top rails. This guide is based on the desired mounting of the closer. NOTE:
For parallel mounts order “P” version to also receive PA Shoe.
EXTERIOR DOOR
PUSH SIDE
MOUNTED
PULL SIDE
MOUNTED
double
Lever Arm
double
Lever Arm
1250
1260
1450
1460
1250
1260
1450
1460
PUSH SIDE
MOUNTED
PULL SIDE
MOUNTED
INTERIOR DOOR
double
Lever Arm
SINGLE
Lever Arm
double
Lever Arm
SINGLE
Lever Arm
1250
1260
1450
1460
1460T
1250
1260
1450
1460
1460T
Product comparison
This chart shows a basic comparison of LCN 1000 Series closers. Refer to the specific closer chapter for complete details.
CYLINDER
*ARM FUNCTION
SE
RI
NO
ES
NHA
NO
N
N- DE
D
SI
AC ZE
CE D
S
DE SIB
LA ILI
YE TY
D
AC
TI
ON
RE
GU
LA
ST R (D
AN
OU
D
B
HE ARD LE)
AV (S
IN
Y
HO DU GLE
T
LD
Y )
-O
ED PE
N
A/
H
CU EDA
SH
/
SC HCU
US SH
H/
SH
CU
SH
COVER
M
PL
AS
TI
C
ET
AL
DE
SI
GN
ER
FINISH
HI
NG
E(
TO PUL
L)
P
SI
J
TO AM DE
B
P
JA (PU
PA MB LL)
RA
(
L PU
ST LEL SH
OP AR )
FA M
CE
PA
IN
T
PO
W
D
PL ER C
AT
O
ED AT
MOUNTING
1250
180
180 180 110 110
1260
180
180 120
1450
180
180 180 110
110
180 110
100
1460
D
1460T
D
AVAILABLE
NOT AVAILABLE
180
180
180
110 110
100
115
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* M
aximum opening/hold-open point with standard template. See individual closer series for degrees of opening per
installation.
D = For designer series only.
1
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1000 Series
surface
mounted
closers
n LCN’s powder coat finish surpasses 100 hours of salt spray which is
APPLICATIONS
n
n
n
n
For aluminum, hollow metal, or wood swinging doors and frames.
Can be used with hinge or pivot mounted door.
Mounts on 1-3/4˝ transom without adapter plates.
Adapter plates and other installation accessories available for
unusual conditions.
n
n
FEATURES COMMON TO 1000 SERIES
n 1000 series closers mount three ways. Closers with regular or hold-
n
n
n
n
n
n
n
open arm mount hinge side or top jamb. Parallel arm, closers include 62PA SHOE required for parallel arm mount. 1460T mounts hinge side,
top jamb (pull side) and stop face.
Non-handed for right and left swinging doors.
Closers to meet ADA reduced opening force requirements.
Adjustable hydraulic backcheck cushions opening swing prior to 90°.
Separate regulation of general closing speed and latching speed.
Joints in arm and shoe adapt to uneven trim.
Reversible shoe to boost latching power on double lever arms.
over four times the ANSI standard for corrosion resistance.
Painted finishes on cast aluminum closers (1250, 1450).
For installations where a higher level of corrosion resistance is
required, LCN offers an optional special rust inhibiting (SRI) pretreatment (cast iron). Closers that combine the exclusive LCN powder
coat finish and the SRI pre-treatment exceed the ANSI standard for
corrosion resistance even further.
Plated finishes are available as an option to accent door and frame
for the 1460 Series closers.
LISTINGS & APPROVALS
UL listed for self-closing doors without hold-open under “SWINGING
DOOR CLOSERS” (GVEV) file R 1943. Tested and certified under ANSI
Standard A156.4 grade one. Consult factory for details.
Consult factory for other listings such as; cUL, California State Fire
Marshal, Bureau of Standards and Appeals.
POSITIVE PRESSURE
DESIGN ASSISTANCE
LCN closers have been certified for three hours by UL to be in compliance
with UL 10 C. Contact LCN for specific details on door closer fire ratings.
LCN has been providing reliable solutions to unique door control problems
since 1925. Design and specification assistance are only a phone call away.
Contact LCN for assistance or technical information at 877-671-7011
or FAX 800-248-1460 (Order Entry), Fax 815-879-1495 for
Product Support.
FASTENERS
1260, 1460, 1460T series closers are shipped with: A standard
SELF-REAMING and TAPPING SCREW (SRT) pack that contains
Philips head SRT screws to install the closer. 1250 and 1450 series closers
are shipped with: A universal screw pack to include self reaming and
tapping screws (SRT), machine screws and wood screws. Standard LCN
thru bolts (TB) can be installed on 1-3/4˝ (44 mm) thick doors with
1/4-20 machine screws. Optional thru bolt (TB) sizes are available
for 1-5/8˝ (41 mm) or 1-3/8˝ (35 mm) door thickness, but this
must be specified when ordering.
WARRANTY
n 30 year limited warranty (1460 Series) and 20 year limited warranty
(1260 Series) on cast iron closers.
n 15 year limited warranty (1250 series) and 25 year limited warranty
(1450 series) on cast aluminum closers.
See General Information Section for complete warranty details.
SPECIFICATIONS
Refer to “SPECIFICATIONS” section for suggested architectural
specifications.
MATERIALS
Drill 25/64˝ for
steel doors
or
Drill 3/8˝
for wood doors
n H
igh strength cast iron (1260, 1460, 1460T) or cast aluminum
n
n
n
n
n
n
n
n
(1250, 1450) cylinder.
Forged steel main arm for all EDA, Cush, 1460HD and 1460T Arms.
One piece forged steel piston.
Heat treated pinion.
L CN's standard all weather fluid performs to temperature ranges
from 120°F (49°C) to -30°F (-35°C).
High efficiency, full complement, low friction bearings.
Tamper resistant regulating screws.
Full rack and pinion hydraulic action.
uiet, low friction track and roller combination for all single lever arm
Q
closers.
Notes:
1. For Thru Bolts, specify door thickness if other than 1-3/4˝ (44 mm). Represented in diagram
as dimension “X”.
2. Phillips head, metric machine screws are available, please specify.
3. LCN recommends the use of wood screws in wood door applications.
MAINTENANCE
Closers mounted according to LCN installation instructions require no
periodic maintenance or adjustments..
FINISHES
n Available in six standard or a wide selection of optional custom
powder coat finishes to blend with door and frame.
2
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1250
Series
Features
The 1250 Series cast aluminum closer is designed for low-frequency and low abusive traffic
areas. This cast aluminum closer is ideal for aluminum storefronts, interior offices and many
other applications. Combining dependable operation, low maintenance and a patented stylish
look - with or without the optional slim line cover. And with the most common hole pattern in
the industry, the 1250 Series is the perfect choice for easy aftermarket replacement.
Certifications
Body Construction
Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
n
n
n
n
Cast Aluminum Body
Full Complement Bearing
1-3/8˝ Diameter Piston
5/8˝ Diameter Single Heat Treated
Pinion Journal
Cover
n
Fasteners
Universal Screw Pack (UNIV)
Mounting
Hinge (Pull Side), Top Jamb (Push Side),
Parallel Arm (Push Side)
Arms
Tripack includes Regular, Top Jamb, and
Parallel Arm (Rw/PA)
Finishes/Colors/
Powder Coat
Slim Line Cover, Optional
Fluid
All Weather Fluid
Handing
Non-Handed
Templating
Peel-n-Stick templates 3/4˝ x 9-1/16˝ Mounting Hole Pattern
Size
Adjustable Spring Size 1-5
n
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
Warranty
15 years
n
Optional SRI primer - powder coat only
Special
Templates
n
n
n
n
n
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
TI
ON
RE
GU
LA
ST R (D
AN
OU
D
B
HE ARD LE)
AV (S
IN
Y
HO DU GLE
T
LD
Y )
ED OPE
N
A/
H
CU EDA
SH
/
SC HCU
US SH
H/
SH
CU
SH
IT
IL
D
IB
YE
LA
DE
AC
CE
SS
D
ZE
ND
SI
N-
N-
NO
NO
180°
AVAILABLE
NOT AVAILABLE
180° 180° 110° 110°
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening/hold-open point with standard template.
3
LCN Door Control Catalog
phone: 877-671-7011
*ARM FUNCTION
AC
Y
CYLINDER
HA
C
TI
AL
ET
AS
M
PL
IN
T
PO
W
D
PL ER C
AT
O
ED AT
PA
COVER
ED
FINISH
MOUNTING
HI
NG
E(
TO PUL
L)
P
SI
J
TO AM DE
B
P
(
JA PU
PA MB LL)
RA
(
L PU
ST LEL SH
OP
AR )
FA M
CE
n
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1250
Series
Mounting details
Hinge (Pull) Side
Mounting
1-1/2"
38 mm
3-1/16"
78 mm
B
2-11/16"
68 mm
A
3-3/16"
81 mm
11-3/4"
298 mm
2-3/8"
60 mm
9-11/16"
246 mm
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point or where a door cannot swing 180°
Reveal
Should not exceed 3/4˝ (19 mm) for regular arm or 1/2˝ (13 mm) for hold-open arm
Top Rail
Less than 2-3/8˝ (60 mm) requires PLATE, 1250-18
Clearance
3-1/16˝ (78mm) behind door required for installation.
Maximum opening
100°:
A = 6-11/16˝ (170mm)
B = 12-7/16˝ (316 mm)
101° to 120°:
A= 5-11/16˝ (144mm)
B = 11-7/16˝ (291 mm)
or *121° to 180°: A= 3-1/16˝ (78 mm)
B = 8-15/16˝ (227 mm)
Hold-open points up to maximum opening with hold-open arm
*Frame and trim permitting.
4
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1250
Series
Mounting details
Top Jamb (Push Side)
Mounting
9-11/16"
246 mm
3-1/16"
78 mm
A
1-15/16"
49 mm
2-9/16"
65 mm
11-3/4"
298 mm
B
2-11/16"
68 mm
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point or where a door cannot swing 180°
Reveal
Arm Type
Maximum Reveal
Opening
Regular Arm
0˝ to 5˝
180°
Long Arm
4˝ to 8˝
165°
Hold-Open Arm
0˝ to 2-3/4˝
180°
Long Hold-Open Arm
2˝ to 6-1/2˝
180°
Top Rail
Requires 1-3/4˝ (44 mm) minimum. 2-1/2˝ (64 mm) minimum with closer on PLATE, 1250-18
Head Frame
Less than 1-3/4˝ (44 mm) requires PLATE, 1250-18. For flush ceiling condition with 2˝ (51 mm) head frame,
use PLATE, 1250-18. (Plate requires 1-3/8˝ (35 mm) minimum.)
Maximum opening
100°:
A = 7-3/16˝ (183 mm)
B = 12-15/16˝ (329 mm)
101° to 120°:
A= 5-11/16˝ (144 mm)
B = 11-7/16˝ (291 mm)
1-13/16"
46 mm
or *121° to 180°: A= 3-1/16˝ (78 mm)
B = 8-15/16˝ (227 mm)
Hold-open points up to maximum opening with hold-open arm
*Frame and trim permitting.
5
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1250
Series
Mounting details
Parallel Arm
(Push Side) Mounting
B
4-1/2
114mm
4"
102 mm
5-5/16"
135 mm
4-1/8"
105 mm
3-1/16"
78 mm
A
16-11/16"
424 mm
9-11/16"
246 mm
The 'A' dimension refers to the edge of the closer body to the center line of pivot or hinge.
The 'B' dimension refers to the edge of the closer shoe bracket to the center line of pivot or hinge.
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point, where a door cannot swing 180°, or where CUSH-N-STOP arm is not used
Top Rail
Less than 4-1/2˝ (114 mm) measured from the stop requires PLATE, 1250-18PA
Clearance
1250-62PA shoe projects 4-1/8˝ (105 mm) from door face
Stop Width
Minimum 1˝ (25 mm)
Blade Stop
Clearance, requires 1/2˝ (13 mm) BLADE STOP SPACER, 1250-61
Auxiliary Shoe
1250-62A allows installation of regular arm with overhead holder/stop
Maximum opening
Regular or hold-open arm can be templated to
100°:
A = 7-5/16˝ (186 mm)
B = 8-5/8˝ (219 mm)
or 101° to 130°:
A= 5-13/16˝ (148 mm)
B = 7-1/8˝ (181 mm)
or *131° to 180°: A= 3-13/16˝ (97 mm)
B = 5-1/8˝ (130 mm)
Hold-open points up to maximum opening with hold-open arm.
*Frame and trim permitting.
Note:
• 1250 Parallel arm closer includes 1250-201 FIFTH HOLE SPACER to support PA SHOE
6
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
EDA mount
B
1250
Series
4"
102 mm
4-13/16"
122 mm
5-11/16"
144 mm
3-1/16"
78 mm
4"
102 mm
A
17"
433 mm
9-11/16"
246 mm
Mounting details
EDA and CUSH -N-STOP
mounting
CUSH/SCUSH mount
B
4"
102 mm
4-13/16"
122 mm
4"
102 mm
A
3-1/16"
78 mm
9-11/16"
246 mm
17"
433 mm
The 'A' dimension refers to the edge of the closer body to the center line of pivot or hinge.
The 'B' dimension refers to the edge of the closer shoe bracket to the center line of pivot or hinge.
Clearance
1250-62EDA or CUSH shoe projects 5-11/16˝ (144mm) from door face
Head Frame
Flush or rabbeted requires CUSH FLUSH PANEL ADAPTER, 1250-419
EDA or CUSH ARM
Requires soffit SHOE SUPPORT, 1250-30 for fifth screw anchorage where reveal is less than 2-3/4˝ (70mm)
Spring CUSH
Dead stop points are approximately 5° more than templated stop point.
Maximum opening
EDA template allows 180°. Hold-open point
up to maximum opening
CUSH arms can be templated for maximum opening/
hold-open point at 85°
100°:
85°:
A = 8-13/16˝ (224 mm)
B = 10-1/2˝ (267 mm)
or 130°: A = 5-13/16˝ (148 mm)
B = 7-1/2˝ (191 mm)
90°:
A = 8-1/16˝ (205 mm)
B = 9-3/4˝ (248 mm)
or 180°: A = 3-13/16˝ (97 mm)
B = 5-1/2˝ (140 mm)
100°:
A = 6-11/16˝ (170 mm)
B = 8-3/8˝ (213 mm)
105°:
A = 6-1/16˝ (154 mm)
B = 7-3/4˝ (197 mm)
110°:
A = 5-7/16˝ (138 mm)
B = 7-1/8˝ (181 mm)
A = 7-5/16˝ (186mm)
B = 9˝ (229 mm)
Note:
• 1250 closers ordered with EDA, CUSH or SPRING CUSH arms include 1250-201 FIFTH HOLE SPACER to support the shoe
7
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1250
Series
Accessories
Cylinders
Covers
1250-3071
Cast Aluminum Cylinder Assembly
1250-72
Slim Line Plastic Cover
n
Non-Handed
n
Non-Handed
n
Standard
n
Optional
Installation Accessories
1250-18
Plate
n
n
n
equired for hinge side mount
R
where top rail is less than
2-3/8˝ (60mm)
equired for top jamb mounting
R
where head frame is less than
1-3/4˝ (44 mm) or flush ceiling
condition exists
n
n
equired for parallel arm
R
mounting where top rail is less
than 4-1/2˝ (114mm), measured
from the stop
n
1250-61
Blade Stop Spacer
Provide anchorage for fifth
screw used with CUSH arms where
reveal is less than
2-3/4˝ (70mm)
Lowers parallel arm shoe to clear
1/2˝ (13 mm) blade stop
n
equires 1-3/4˝ (44 mm)
R
minimum top rail
equires minimum 1-1/2˝ (38
R
mm) minimum top rail or 1-1/4˝
(32 mm) head frame
1250-62A
Auxiliary Shoe
n
1250-30
CUSH Shoe Support
1250-18PA
Plate
equires a top rail of 7-1/8˝
R
(181mm). Optional shoe replaces
-62PA for parallel arm mounting
of regular arm with overhead
holder/stop
1250-62PA
PA Shoe
1250-419
PA Flush Panel Adapter
n
rovides horizontal mounting
P
surface for PA, EDA or CUSH
shoe on single rabbeted or
flush frame
8
n
Required for parallel arm mounting
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1250
Series
Accessories
Arms
1250-3077
Regular Arm w/PA
1250-3077L
Long Arm
Non-handed
n
Mounts hinge side or top jamb
n
Non-handed
n
n
n
1250-3077EDA
Extra Duty Arm
arallel Arm includes PA SHOE,
P
1250-62PA required for parallel
arm mounting
1250-3049
Hold-Open Arm w/ PA
n
Non-handed
n
I ncludes LONG ROD AND SHOE,
1250-79LR for top jamb mount
with deep reveals
Optional
Non-handed
1250-3077CNS
Cush-n-Stop® Arm
Non-handed
Mounts hinge side, top jamb or
parallel arm (62PA required)
Hold-open adjustable at shoe
n
Non-handed
Includes LONG HEAD AND TUBE,
1250-3048L for top jamb mount
with deep reveals
n
Optional
Optional
Handed
rovides hold-open function
P
adjustable at shoe
Optional
n
n
1250-3049CNS
HCUSH Arm
Non-handed
n
n
F eatures solid forged steel main
arm and forearm with stop in soffit
shoe
Optional
n
n
n
Optional
n
n
n
F eatures solid forged steel main
and forearm for potentially abusive
installations
n
1250-3049L
Long Hold-Open Arm
n
n
1250-3049EDA
Hold-Open Extra Duty Arm
n
n
rovides hold-open function with
P
templated stop/hold-open points.
Handle controls hold-open
function
n
Optional
n
1250-3049SCNS
Spring HCUSH Arm
1250-3077SCNS
Spring CUSH Arm
Non-handed
Non-handed
n
n
F or abusive applications features
solid forged steel main arm and
forearm with spring loaded stop in
the soffit shoe
Optional
n
n
n
F or abusive applications features
solid forged steel main arm and
forearm with spring loaded stop in
the soffit shoe
Handle controls hold-open
function
n
Optional
n
9
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1250
Series
Ordering Information
How-to-order 1250 Series closers
Closer will be shipped with:
- Standard cylinder
- Tri pack arm (Rw/PA)
- Universal screw pack
Select finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary,
Light Bronze, Black, Brass
unless options listed below are selected.
Closer options
Cover
Slim line cover (SLIM)
Finish
Custom Powder Coat (RAL)
SRI primer
Arm
Regular w/62PA (Rw/PA)
Long (LONG)
Regular w/62A (R/62A)
Hold-Open w/62PA (Hw/PA)
Long Hold-Open (HLONG)
Extra Duty (EDA)
Hold-Open Extra Duty (HEDA) - specify handing
Cush-N-Stop (CUSH)
HCush (HCUSH)
Spring CUSH (SCUSH)
Spring HCUSH (SHCUSH)
Optional screw packs
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTORX)
* Specify door thickness if other than 1-3/4˝
Installation accessories
Plate, 1250-18
Plate, 1250-18PA
CUSH Shoe Support, 1250-30
Blade Stop Spacer, 1250-61
Auxiliary Shoe, 1250-62A
PA Flush Panel Adapter, 1250-419
Special template
ST- ________
Meets Buy American Act
BAA
Table of sizes
n
n
Select closer based on width of door.
The spring power of a 1250 cylinder is field adjustable from size 1 through size 5 and is shipped adjusted to size 3.
Exterior (and Vestibule) door width
Interior door width
24˝
30˝
36˝
42˝
24˝
34˝
38˝
48˝
54˝
610mm
762mm
914mm
1067mm
610mm
864mm
965mm
1219mm
1372mm
*1250
size 3
size 4
size 5
*1250
Minimum door width
size 2
size 3
size 4
size 5
Minimum door width
Indicates recommended range of door width for closer size.
* Adjustable Size 1 thru 5.
Reduced opening force 1250 Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for information on
systems that meet reduced opening force requirements
without affecting closing power.
* Maximum opening force.
10
DOOR WIDTH
36˝
42˝
48˝
8.5* lbs.
1250
1250
1250
5.0* lbs.
1250
1250
1250
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 5/16
1260
Series
Features
The 1260 is a light to medium duty cast iron closer designed to fit into the most common
commercial foot print. The 1260 is adjustable for spring sizes 1-5. The 1260 also features a
complete line of regular and extra duty arms, LCN’s peel-n-stick installation templates, a
convenient spring adjust pointer, and an optional Quick Fix™ bracket kit.
Certifications
Body Construction
Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
n
n
n
n
Cast Iron Body
Full Complement Bearing
1-3/8˝ Diameter Piston
5/8˝ Diameter Single Heat Treated
Pinion Journal
Cover
n
Fasteners
Self Reaming and Tapping Screws (SRT)
Mounting
Hinge (Pull Side), Top Jamb (Push Side),
Parallel Arm (Push Side)
Arms
Regular Arm
Finishes/Colors/
Powder Coat
Slim Line Cover, Optional
Size
Adjustable Spring Size 1-5
n
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
Warranty
20 years
n
Optional SRI primer - powder coat only
Fluid
All Weather Fluid
Handing
Non-Handed
Templating
Peel-n-Stick templates 3/4˝ x 9-1/16˝ Mounting Hole Pattern
n
n
n
Special
Templates
n
n
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
TI
ON
RE
GU
LA
ST R (D
AN
OU
D
B
HE ARD LE)
AV (S
IN
Y
HO DU GLE
LD TY )
ED OPE
N
A/
H
CU EDA
SH
/
SC HCU
US SH
H/
SH
CU
SH
IT
IL
D
IB
YE
SS
LA
DE
CE
AC
180°
AVAILABLE
NOT AVAILABLE
180° 120° 110° 110°
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening/hold-open point with standard template.
11
LCN Door Control Catalog
phone: 877-671-7011
*ARM FUNCTION
AC
ED
D
ZE
ND
SI
HA
N-
N-
NO
NO
C
AL
TI
ET
AS
M
PL
DE
SI
GN
ER
AT
CO
R
ED
DE
AT
W
PL
PO
CYLINDER
Y
COVER
SE
RI
ES
FINISH
MOUNTING
HI
NG
E(
TO PUL
L)
P
SI
J
TO AM DE
B
P
JA (PU
PA MB LL)
RA
(
L PU
ST LEL SH
OP
AR )
FA M
CE
n
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 5/16
1260
Series
Mounting details
Hinge (Pull) Side
Mounting
2-11/16"
68 mm
B
2-7/8"
73 mm
A
2-1/2"
64 mm
3-3/8"
86 mm
9-15/16"
252 mm
12"
305 mm
1260-18
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point or where a door cannot swing 180°
Reveal
Should not exceed 3/4˝ (19 mm) for regular arm or 1/2˝ (13 mm) for hold-open arm
Top Rail
Less than 2-1/2˝ (64 mm) requires PLATE, 1260-18
Clearance
2-7/8˝ (73 mm) behind door required for installation
Maximum opening
110°:
A = 6-9/16˝ (167 mm)
B = 12-7/16˝ (316 mm)
101° to 120°:
A= 5-9/16˝ (141 mm)
B = 11-7/16˝ (291 mm)
or *121° to 180°: A= 3-1/16˝ (78 mm)
B = 8-15/16˝ (227 mm)
Hold-open points up to maximum opening with hold-open arm
*Frame and trim permitting.
12
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
1-1/4"
32 mm
n
009426 rev. 2/16
1260
Series
Mounting details
Top Jamb (Push Side)
Mounting
9-15/16"
252 mm
2-5/8"
67 mm
2-7/8"
73 mm
A
1-7/8"
48 mm
1-7/8"
48 mm
B
2-11/16"
68 mm
12"
305 mm
1260-18
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point or where a door cannot swing 180°
Reveal
Arm Type
Maximum Reveal
Opening
Regular Arm
3-1/2˝
Up to 120°
Regular Arm
2-1/4˝
121° to 180°
Long Arm
7-1/2˝
Up to 120°
Long Arm
3-1/2˝
121° to 180°
Hold-Open Arm
2˝
Up to 120°
Hold-Open Arm
2-1/4˝
121° to 180°
Long Hold-Open Arm
4-1/2˝
Up to 120°
Long Hold-Open Arm
4-1/2˝
121° to 160°
Top Rail
1-3/4˝ (44 mm) minimum. 2-1/2˝ (64 mm) minimum with closer on PLATE, 1260-18
Head Frame
Less than 1-3/4˝ (44 mm) requires PLATE, 1260-18. For flush ceiling condition with 2˝ (51 mm) head frame,
use PLATE, 1260-18. (Plate requires 1-3/8˝ (35 mm) minimum.)
Maximum opening
110°:
A = 7-1/16˝ (179 mm)
B = 12-15/16˝ (329 mm)
101° to 120°:
A= 5-9/16˝ (141 mm)
B = 11-7/16˝ (291 mm)
or *121° to 180°: A= 3-1/16˝ (78 mm)
B = 8-15/16˝ (227 mm)
Hold-open points up to maximum opening with hold-open arm
*Frame and trim permitting.
13
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1260
Series
Mounting details
Parallel Arm
(Push Side) Mounting
B
5-1/4"
133 mm
4"
102 mm
4-1/2"
114 mm
A
2-7/8"
73 mm
4"
102 mm
9-15/16"
252 mm
16-1/4"
413 mm
1260-18PA
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point, where a door cannot swing 180°, or where CUSH-N-STOP arm is not used
Top Rail
Less than 4-3/8˝ (111 mm) measured from the stop requires PLATE, 1260-18PA
Clearance
1260-62PA shoe projects 4˝ (102 mm) from door face
Stop Width
Minimum 1˝ (25 mm)
Blade Stop
Clearance, requires 1/2˝ (13 mm) BLADE STOP SPACER, 1260-61
Auxiliary Shoe
1260-62A allows installation of regular arm with overhead holder/stop. Special templating required
Maximum opening
Regular or hold-open arm can be templated to
100°:
A = 7-3/16˝ (183 mm)
B = 8-5/8˝ (219 mm)
or 101° to 130°:
A= 5-11/16˝ (144 mm)
B = 7-1/8˝ (181 mm)
or *131° to 180°: A= 3-11/16˝ (94 mm)
B = 5-1/8˝ (130 mm)
Hold-open points up to maximum opening with hold-open arm.
*Frame and trim permitting.
Notes:
• Optional mounting requires PA SHOE, 1260-62PA for REGULAR or HOLD-OPEN arms
• 1260 Parallel arm closer includes 1260-201 FIFTH HOLE SPACER to support PA SHOE
14
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
EDA mount
4"
102 mm
B
5-1/4"
133 mm
2-7/8"
73 mm
5-1/2"
140 mm
1260
Series
4-1/2"
114 mm
9-15/16"
252 mm
A
Mounting details
16"
406 mm
EDA and CUSH
mounting
1260-18PA
CUSH mount
B
4"
102 mm
5-1/4"
133 mm
2-7/8"
73 mm
5-1/2"
140 mm
4-1/2"
114 mm
9-15/16"
252 mm
A
16"
406 mm
1260-18PA
Clearance
1260-62EDA or CUSH shoe projects 5-1/2˝ (140 mm) from door face
Head Frame
Flush or rabbeted requires CUSH FLUSH PANEL ADAPTER, 1260-419
EDA or CUSH ARM
Requires SHOE SUPPORT, 1260-30 for fifth screw anchorage where reveal is less than 3-1/16˝ (78 mm)
Maximum opening
EDA template allows 120°. Hold-open point
up to maximum opening
CUSH arms can be templated for maximum opening/
hold-open point at
85°:
A = 5-5/16˝ (135 mm)
B = 10˝ (254 mm)
or 120°: A = 3-5/16˝ (84 mm)
B = 8˝ (203 mm)
90°:
A = 4-11/16˝ (119 mm)
B = 9-3/8˝ (238 mm)
Hold-open points up to maximum
opening with HEDA arm
100°:
A = 3-9/16˝ (90 mm)
B = 8-1/4˝ (210 mm)
110°:
A = 2-13/16˝ (71 mm)
B = 7-1/2˝ (191 mm)
90°:
A = 4-13/16˝ (122 mm)
B = 9-1/2˝ (241 mm)
Note:
• 1260 closers ordered with EDA, CUSH or SPRING CUSH arms include 1260-201 FIFTH HOLE SPACER to support the shoe.
15
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1260
Series
Accessories
Cylinders
Covers
1261(2)(3)(4)(5)-3071
Cast Iron Cylinder Assembly
1260-72
Slim Line Plastic Cover
n
Non-handed
n
Non-handed
n
Standard
n
Optional
Installation Accessories
1260-18
Plate
n
n
n
equired for hinge side mount
R
where top rail is less than 2-1/2˝
(64 mm)
equired for top jamb mounting
R
where head frame is less than
1-3/4˝ (44 mm) or flush ceiling
condition exists
n
n
equired for parallel arm
R
mounting where top rail is less
than 4-3/8˝ (111 mm), measured
from the stop
n
n
equires 1-3/4˝ (44 mm)
R
minimum top rail
1260-30
CUSH Shoe Support
ptional kit includes retro-fit
O
mounting plates for 1371 closer
cylinder and shoe
n
seful in applications when
U
previously drilled holes are
damaged
Provide anchorage for fifth
screw used with CUSH arms
where reveal is less than
3-1/16˝ (78 mm)
equires minimum 1-1/2˝ (38
R
mm) minimum top rail or 1-1/4˝
(32 mm) head frame
1260-61
Blade Stop Spacer
Lowers parallel arm shoe to clear
1/2˝ (13 mm) blade stop
n
1260-18QF
Quick Fix™ Bracket Kit
1260-18PA
Plate
n
n
1260-62PA
PA Shoe
1260-419
PA Flush Panel Adapter
1260-62A
Auxiliary Shoe
equires a top rail of 7˝ (178
R
mm)
n
ptional shoe replaces-62PA for
O
parallel arm mounting of regular
arm with overhead holder/stop
16
rovides horizontal mounting
P
surface for PA, EDA or CUSH
shoe on single rabbeted or
flush frame
n
equired for parallel arm
R
mounting
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1260
Series
Accessories
Arms
1260-3077
Regular Arm
n
Non-handed
n
Mounts hinge side or top jamb
n
n
arallel Arm includes PA SHOE,
P
1260-62PA required for parallel
arm mounting
1260-3049L
Long Hold-open Arm
n
n
n
Non-handed
Non-handed
n
Includes LONG HEAD AND TUBE,
1260-3048L for top jamb mount
with deep reveals
I ncludes LONG ROD AND SHOE,
1260-79LR for top jamb mount
with deep reveals
Optional
Optional
n
F eatures solid forged steel main
arm and forearm with stop in soffit
shoe
Optional
n
n
F eatures solid forged steel main
and forearm for potentially
abusive installations
n
Non-handed
1260-3049EDA
Hold-Open Extra Duty Arm
n
F eatures solid forged steel main
and forearm for potentially
abusive installations
n
Handed arm
rovides hold-open function
P
adjustable at shoe
Optional
n
ptional 1260-3077EDA/G for
O
blade stop clearance
1260-3049CNS
HCUSH Arm
n
Hold-open adjustable at shoe
n
1260-3077EDA/62G
Extra Duty Arm w/ 62G
Non-handed
1260-3077CNS
Cush-n-Stop® Arm
n
Mounts hinge side, top jamb or
parallel arm (62PA required)
Optional
n
Non-handed
Non-handed
n
n
n
n
n
1260-3077EDA
Extra Duty Arm
n
n
1260-3049
Hold-open Arm
1260-3077L
Long Arm
Non-handed
rovides hold-open function with
P
templated stop/hold-open points.
Handle controls hold-open
function
n
Optional
n
17
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1260
Series
Ordering Information
How-to-order 1260 Series closers
Closer will be shipped with:
- Standard cylinder
- Regular arm
- Self-reaming and tapping screws
Select finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary,
Light Bronze, Black, Brass
unless options listed below are selected.
Closer options
Cover
Slim line cover (SLIM)
Finish
Custom Powder Coat (RAL)
SRI primer (for use with powder coat finishes only)
Arm
Optional screw packs
TB* w/Self-Reaming and Tapping Screws (TBSRT)
Wood & Machine Screw (WMS)
TB*, Wood & Machine Screw (TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTORX)
* Specify door thickness if other than 1-3/4˝
Installation accessories
Plate, 1260-18
Plate, 1260-18PA
CUSH Shoe Support, 1260-30
Blade Stop Spacer, 1260-61
Auxiliary Shoe, 1260-62A
PA Flush Panel Adapter, 1260-419
Quick Fix™ Bracket Kit, 1260-18QF
Regular w/62PA (Rw/PA)
Long (LONG)
Regular w/62A (R/62A)
Hold-Open (H)
Hold-Open w/62PA (Hw/PA)
Long Hold-Open (HLONG)
Extra Duty (EDA) (optional -62G)
Hold-Open Extra Duty (HEDA) - specify handing (optional -62G)
Cush-N-Stop (CUSH)
HCush (HCUSH)
Special template
ST- ________
Table of sizes
Select closer based on width of door.
The spring power of a 1261 cylinder is field adjustable from size 1 through size 5 and is shipped adjusted to size 3.
n
n
Exterior (and Vestibule) door width
Interior door width
24˝
30˝
36˝
42˝
24˝
34˝
38˝
48˝
54˝
610mm
762mm
914mm
1067mm
610mm
864mm
965mm
1219mm
1372mm
*1261
size 3
size 4
size 5
*1261
Minimum door width
size 2
size 3
size 4
size 5
Minimum door width
Indicates recommended range of door width for closer size.
* Adjustable Size 1 thru 5.
Reduced opening force 1260 Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for information on
systems that meet reduced opening force requirements
without affecting closing power.
* Maximum opening force.
18
DOOR WIDTH
36˝
42˝
48˝
8.5* lbs.
1261
1261
1261
5.0* lbs.
1261
1261
1261
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1450
Series
Features
The 1450 Series cast aluminum closer was specially designed to deliver consistent, dependable,
long-term performance in frequently-used, low-abusive traffic areas. The patented design,
featuring the industry's most common hole pattern, is an excellent choice for a range of
applications - from aftermarket replacement to aluminum store fronts, to new construction
projects - anywhere quality, reliability and value are important.
Certifications
Body Construction
Cover
Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
n
n
n
n
n
n
Cast Aluminum Body
Full Complement Bearing
1-1/4˝ Diameter Piston
5/8˝ Diameter Single Heat Treated
Pinion Journal
Fasteners
Universal Screw Pack (UNIV)
Mounting
Hinge (Pull Side), Top Jamb (Push Side),
Parallel Arm (Push Side)
Arms
Standard regular pull side, and top jamb
Finishes/Colors/
Powder Coat
Fluid
All Weather Fluid
Handing
Non-Handed
Templating
Peel-n-Stick templates 3/4˝ x 12˝ Mounting Hole Pattern
n
n
n
n
n
n
n
Size
Adjustable Spring Size 1-6
Warranty
25 years
n
n
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
Optional SRI primer - powder coat only
Optional plated finishes
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
ON
RE
GU
LA
R
ST
AN (DO
DA UB
HO RD LE)
LD (S
IN
ED OPE GLE
N* )
A/
H
CU EDA
*
SH
/H
SC CU
US SH
H/
SH
CU
SH
TI
IT
IL
ED
D
IB
DE
AC
CE
SS
ZE
ND
SI
HA
N-
N-
NO
NO
C
AL
TI
ET
AS
M
180°
AVAILABLE
NOT AVAILABLE
180° 180° 110° 110°
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening/hold-open point with standard template.
D = For designer series only.
19
LCN Door Control Catalog
phone: 877-671-7011
*ARM FUNCTION
AC
ED
Y
CYLINDER
AT
CO
R
ED
DE
AT
PL
T
W
IN
PO
PA
HI
NG
E(
TO PUL
L)
P
SI
J
TO AM DE
B
P
JA (PU
PA MB LL)
RA
(
L PU
ST LEL SH
OP
AR )
FA M
CE
COVER
LA
Y
FINISH
MOUNTING
PL
Special
Templates
Slim Line Plastic, Standard
Full Plastic and Metal, Optional
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1450
Series
Mounting details
Hinge (Pull) Side
Mounting
3/4"
19 mm
B
2-11/16"
68 mm
2-15/16"
75 mm
11-13/16"
300 mm
2-11/16"
68 mm
2-1/8"
54 mm
A
REGULAR-PULL SIDE
13-1/16"
332 mm
The 'A' dimension refers to the edge of the closer body to the center line of pivot or hinge.
The 'B' dimension refers to the edge of the closer shoe bracket to the center line of pivot or hinge.
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point or where a door cannot swing 180°
Reveal
Should not exceed 3/4˝ (19 mm) for regular arm or 1/2˝ (13 mm) for hold-open arm
Top Rail
n
n
Less than 2-1/2˝ (64 mm) requires PLATE, 1450-18
With Full cover, use PLATE, 1450-18FC. Plate requires 1-1/2˝ (38 mm) minimum
Clearance
2-3/8˝ (60 mm) behind door required for installation
Delayed Action
Delays closing from 180°-70°. Delay time adjustable up to approximately 1 minute
Maximum opening
100°:
A = 7˝ (102 mm)
B = 12-3/8˝ (314 mm)
101° to 130°: A=5-1/2˝ (140 mm)
B = 10-7/8˝ (276 mm)
131° to 180°: A=4˝ (140 mm)
B = 9-3/8˝ (238 mm)
Hold-open points up to maximum opening with hold-open arm
*Frame and trim permitting.
20
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1-3/8"
35 mm
1450
Series
Mounting details
Top Jamb (Push Side)
Mounting
2-9/16"
65 mm
11-3/4"
299 mm
A
B
3/4"
19 mm
1-5/8"
42 mm
2-11/16"
68 mm
13-1/16"
332 mm
The 'A' dimension refers to the edge of the closer body to the center line of pivot or hinge.
The 'B' dimension refers to the edge of the closer shoe bracket to the center line of pivot or hinge.
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point or where a door cannot swing 180°
Reveal
Arm Type
Reveal
Max Opening
Regular Arm
5˝
Up to 170°
Regular Arm
3-3/4˝
Up to 180°
Long Arm
8˝
Up to 155°
Hold-Open Arm
2-3/4˝
Up to 180°
Long Hold-Open Arm
4-7/8˝
Up to 140°
Top Rail
Requires 2-1/8˝ (54 mm) minimum. 3-3/8˝ (86 mm) minimum with closer on PLATE, 1450-18.
Head Frame
Less than 1-3/4˝ (44 mm) requires PLATE, 1450-18. For flush ceiling condition with 1-3/4˝ (45 mm) head frame, use
PLATE, 1450-18
Delayed Action
Delays closing from 180°-70°. Delay time adjustable up to approximately 1 minute
Maximum opening
100°:
A=7˝ (102 mm)
B = 12-3/8˝ (314 mm)
101° to 130°: A= 5-1/2˝ (140 mm)
B = 10-7/8˝ (276 mm)
131° to 180°: A= 4˝ (102 mm)
B = 9-3/8˝ (238 mm)
Hold-open points up to maximum opening with hold-open arm.
*Frame and trim permitting.
21
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1450
Series
Mounting details
Parallel Arm
(Push Side) Mounting
B
4"
102 mm
5-3/8"
136 mm
A
20-3/8"
517 mm
2-1/8"
54 mm
13-1/16"
332 mm
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point, where a door cannot swing 180°, or where CUSH-N-STOP arm is not used
Top Rail
n
n
Less than 5-1/4˝ (133 mm) measured from the soffit requires
Plate requires 1-1/4˝ (32 mm) minimum.
Cover
Plastic
Metal
Minimum Top Rail
(measured from soffit)
Plate Required
3-1/2˝ (89 mm)
2-1/4˝ (57 mm)
3-1/2˝ (89 mm)
2-1/4˝ (57 mm)
1450-18
1450-18PA
1450-18FC
1450-18PAFC
Clearance
1450-62PA shoe projects 4-1/8˝ (105 mm) from door face
Head Frame
Flush or single rabbeted requires PA SHOE ADAPTER, 1450-418
Stop Width
Minimum 1˝ (25 mm)
Blade Stop
Clearance, requires 1/2˝ (13 mm) BLADE STOP SPACER, 1450-61
Auxiliary Shoe
1450-62A allows installation of regular arm with overhead holder/stop
Delayed Action
Delays closing from 180°-70°. Delay time adjustable up to approximately 1 minute
Maximum opening
Regular or hold-open arm can be templated to
120°:
A = 3-3/16˝ (81 mm)
B = 8-7/8˝ (225 mm)
121° to 180°: A= 11/16˝ (17 mm)
B = 6-3/8˝ (162 mm)
Hold-open points up to maximum opening with hold-open arm.
Notes:
• PA shoe is included with Rw/PA Arm
• 1450 closer includes 1450-201 FIFTH HOLE SPACER to support PA SHOE
22
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4-1/8"
105 mm
EDA/HEDA mount
1450
Series
4"
102 mm
A
4-9/16"
116 mm
5-11/16"
145 mm
2-11/16"
68 mm
20-13/16"
528 mm
13-1/16"
332 mm
B
Mounting details
EDA and CUSH -N-STOP
mounting
2-1/8"
54 mm
CUSH/HCUSH/SCUSH /SHCUSH mount
4"
102 mm
A
4-9/16"
116 mm
5-11/16"
145 mm
2-11/16"
68 mm
B
20-13/16"
528 mm
13-1/16"
332 mm
2-1/8"
54 mm
The 'A' dimension refers to the edge of the closer body to the center line of pivot or hinge.
The 'B' dimension refers to the edge of the closer shoe bracket to the center line of pivot or hinge.
Clearance
1450-62EDA or CUSH shoe projects 5-11/16˝ (144mm) from door face
Head Frame
Flush or rabbeted requires CUSH FLUSH PANEL ADAPTER, 1450-419
EDA or CUSH ARM
Requires soffit SHOE SUPPORT, 1450-30 for fifth screw anchorage where reveal is less than 3-1/16˝ (78 mm)
Spring CUSH
Dead stop points are approximately 5° more than templated stop points
Maximum opening
EDA template allows 110°. Hold-open point
up to maximum opening
CUSH arms can be templated for maximum opening/
hold-open point at 85°
120°:
A = 8-7/8˝ (225 mm)
B = 3-3/16˝ (81 mm)
85°:
A = 10-3/8˝ (279 mm)
B = 4-15/16˝ (140 mm)
over 120°: A = 6-3/8˝ (162 mm)
B = 11/16˝ (17 mm)
90°:
A = 9-5/8˝ (244 mm)
B = 4-3/16˝ (106 mm)
95°:
A = 8-7/8˝ (225 mm)
B = 3-7/16˝ (87 mm)
100°:
A = 8-1/4˝ (210 mm)
B = 2-13/16˝ (71 mm)
105°:
A = 7-5/8˝ (194 mm)
B = 2-3/16˝ (56 mm)
110°:
A = 7˝ (178 mm)
B = 1-9/16˝ (40 mm)
Note:
• 1450 closers ordered with EDA, CUSH or SPRING CUSH arms include 1450-201 FIFTH HOLE SPACER to support the shoe.
23
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1450
Series
Accessories
Cylinders
Covers
Left hand shown
1450-3071
Cast Aluminum Cylinder Assembly
1450-72
Slim Line Plastic Cover
1450-72MC
Metal Cover
1450-72FC
Full Plastic Cover
n
Non-Handed
n
Non-Handed
n
Handed
n
Non-Handed
n
Standard
n
Standard
n
Optional
n
Optional
1450-3071DEL
Cast Aluminum Cylinder
Assembly with Delay Action
n
Optional
Installation Accessories
1450-18 / 1450-18FC
Plate
n
n
n
n
equired for hinge side mount
R
where top rail is less than
2-1/2˝ (64 mm)
equired for top jamb mounting
R
where head frame is less than
1-3/4˝ (44 mm) or flush ceiling
condition exists
1450-30
CUSH Shoe Support
1450-18PA / 1450-18PAFC
Plate
n
n
n
equires minimum 1-1/2˝
R
(38 mm) minimum top rail or
1-1/4˝ (32 mm) head frame
equired for parallel arm
R
mounting where top rail is less
than 4-3/8˝ (111mm), measured
from the stop
n
1450-61
Blade Stop Spacer
Provide anchorage for fifth
screw used with CUSH arms where
reveal is less than
3-1/16˝ (78mm)
Lowers parallel arm shoe to clear
1/2˝ (13 mm) blade stop.
n
equires 1-3/4˝ (44 mm)
R
minimum top rail
With full cover, use PLATE,
1450-18FC
With full cover, use PLATE,
1450-18FC
1450-62PA
PA Shoe
n
1450-419
PA Flush Panel Adapter
1450-62A
Auxiliary Shoe
equired for parallel arm
R
mounting
24
n
equires a top rail of 7˝ (178mm).
R
Optional shoe replaces -62PA for
parallel arm mounting of regular
arm with overhead holder/stop
n
rovides horizontal mounting
P
surface for PA, EDA or CUSH shoe
on single rabbeted or flush frame
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1450
Series
Accessories
Arms
1450-3077
Regular Arm w/PA
n
Non-Handed
n
Mounts hinge side or top jamb
n
n
n
I ncludes PA SHOE, 1450-62PA
required for parallel arm mounting
n
n
n
F eatures solid forged steel main
and forearm for potentially abusive
installations
ptional 1450-3077EDA/G for
O
blade stop clearance
1450-3049CNS
HCUSH Arm
n
n
n
n
Non-Handed
n
rovides hold-open function with
P
templated stop/hold-open points
n
Handle controls hold-open
function
Optional
n
I ncludes LONG ROD AND SHOE,
1450-79LR for top jamb mount
with deep reveals
Optional
Non-Handed
Hold-open adjustable at shoe
n
Optional
1450-3049EDA
Hold-Open Extra Duty Arm
n
F eatures solid forged steel main
and forearm for potentially abusive
installations
n
Non-Handed
Includes LONG HEAD AND TUBE,
1450-3048L for top jamb mount
with deep reveals
n
n
Optional
Non-Handed
1450-3049L
Long Hold-Open Arm
n
Mounts hinge side, top jamb or
parallel arm (62PA required)
n
n
Handed arm
1450-3077CNS
Cush-n-Stop® Arm
n
rovides hold-open function
P
adjustable at shoe
n
Optional
n
ptional 1450-3077EDA/G for
O
blade stop clearance
Non-Handed
F eatures solid forged steel main
arm and forearm with stop in soffit
shoe
Optional
n
1450-3049SCNS
Spring HCUSH Arm
1450-3077SCNS
Spring CUSH Arm
n
n
Non-Handed
1450-3077EDA/62G
Extra Duty Arm w/ 62G
1450-3077EDA
Extra Duty Arm
n Non-Handed
n
1450-3049
Hold-Open Arm w/PA
1450-3077L
Long Arm
Non-Handed
n
F or abusive applications features
solid forged steel main arm and
forearm with spring loaded stop in
the soffit shoe
Optional
n
Non-Handed
F or abusive applications features
solid forged steel main arm and
forearm with spring loaded stop in
the soffit shoe
Handle controls hold-open
function
n
n
Optional
n
25
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1450
Series
Ordering Information
How-to-order 1450 Series closers
Closer will be shipped with:
- Standard cylinder
- Standard cover
- Tri pack arm (Rw/PA)
- Universal screw pack
Select finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary,
Light Bronze, Black, Brass
unless options listed below are selected.
Closer options
Cylinder
Delayed Action (DEL)
Finish
Custom Powder Coat (RAL)
(Metal cover required)
Plated Finish, US ___________
(Metal cover required)
SRI primer
Arm
Regular w/62PA (Rw/PA)
Long (LONG)
Regular w/62A (Rw/62A)
Hold-Open w/62PA (Hw/PA)
Long Hold-Open (HLONG)
Extra Duty (EDA) (optional -62G)
Hold-Open Extra Duty (HEDA) - specify handing
Cush-N-Stop (CUSH)
HCush (HCUSH)
Spring Cush (SCUSH)
Spring HCush (SHCUSH)
Optional screw packs
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTORX)
* Specify door thickness if other than 1-3/4˝
Installation accessories
Plate, 1450-18
Plate, 1450-18FC
Plate, 1450-18PA
Plate, 1450-18PAFC
CUSH Shoe Support, 1450-30
Blade Stop Spacer, 1450-61
Auxiliary Shoe, 1450-62A
PA Flush Panel Adapter, 1450-419
Table of sizes
n
n
Special template
ST- ________
Meets Buy American Act
BAA
Select closer based on width of door.
The spring power of a 1450 cylinder is field adjustable from size 1 through size 6 and is shipped adjusted to size 3.
Exterior (and Vestibule) door width
Interior door width
24˝
30˝
36˝
42˝
48˝
24˝
34˝
38˝
48˝
54˝
60˝
610mm
762mm
914mm
1067mm
1219mm
610mm
864mm
965mm
1219mm
1372mm
1524mm
*1450
size 3
size 4
size 5
size 6
size 2
*1450
Minimum door width
size 3
size 4
size 5
size 6
Minimum door width
Indicates recommended range of door width for closer size.
* Adjustable Size 1 thru 6.
Reduced opening force 1450 Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for information on
systems that meet reduced opening force requirements
without affecting closing power.
* Maximum opening force.
26
DOOR WIDTH
36˝
42˝
48˝
8.5* lbs.
1450
1450
1450
5.0* lbs.
1450
1450
1450
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1460
Series
Features
Designed for maximum versatility, the 1460, available with multiple cover options, can be
used for both commercial and institutional applications. This fully universal closer offers a
wide variety of options and fast and accurate installation.
Certifications
Body Construction
n
n
n
n
Cast Iron Body
Full Complement Bearing
1-1/4˝ Diameter Piston
3/4˝ Diameter Single Heat Treated
Pinion Journal
n
n
Fluid
Cover
Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
Fasteners
Self Reaming and Tapping Screws (SRT)
Mounting
Hinge (Pull Side), Top Jamb (Push Side),
Parallel Arm (Push Side)
Arms
All Weather Fluid
Standard regular pull side, and top jamb
Finishes/Colors/
Powder Coat
Handing
Non-Handed
Templating
Peel-n-Stick templates 1˝ x 7-1/2˝ Mounting Hole Pattern
n
n
n
n
n
n
n
30 years
n
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
Optional SRI primer - powder coat only
Optional plated finishes
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
CYLINDER
ND
ED
SI
AC ZE
CE D
S
DE SIB
LA ILI
YE TY
D
AC
TI
ON
RE
GU
LA
ST R (D
AN
OU
D
B
HE ARD LE)
AV
(S
IN
Y
HO DU GLE
LD TY )
ED OPE
N
A/
H
CU EDA
SH
/
SC HCU
US SH
H/
SH
CU
SH
N-
D
AVAILABLE
NOT AVAILABLE
*ARM FUNCTION
HA
N-
DE
SI
GN
ER
M
PO
PL
AS
TI
C
W
D
PL ER C
AT
O
ED AT
SE
RI
ES
COVER
NO
FINISH
MOUNTING
HI
NG
E(
TO PUL
L)
P
SI
J
TO AM DE
B
P
JA (PU
PA MB LL)
RA
(
L PU
ST LEL SH
OP
AR )
FA M
CE
n
NO
Special
Templates
AL
Warranty
Adjustable Spring Size 1-6. Includes Patented
Green Dial
ET
Size
Slim Line Plastic, Standard
Full Plastic and Metal Designer Series,
Optional
180
180
100 100
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening/hold-open point with standard template.
D = For designer series only.
27
LCN Door Control Catalog
phone: 877-671-7011
180 110
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1460
Series
Mounting details
Hinge (Pull) Side
Mounting
B
3/4"
19 mm
2-3/8"
60 mm
11-3/8"
289 mm
A
2-11/16"
68 mm
1-3/8"
35 mm
2"
51 mm
12-1/4"
311 mm
2-9/16"
65 mm
Optional
Non-handed Designer Series Metal Cover
12-1/2"
318 mm
1460-18
12-3/8"
314 mm
3"
76 mm
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point or where a door cannot swing 180°
Reveal
Should not exceed 3/4˝ (19 mm) for regular arm or 1/2˝ (13 mm) for hold-open arm
Top Rail
n
n
n
Less than 2-1/2˝ (64 mm) requires PLATE, 1460-18
With Full cover, use PLATE, 1460-18FC. Plate requires 1-1/2˝ (38 mm) minimum
With Designer Series metal cover, use PLATE, 1460-18DS1
Clearance
2-3/8˝ (60 mm) behind door required for installation
Delayed Action
n
n
n
Maximum opening
Add suffix “DEL” to selected cylinder (eg. 1461 DEL)
Delays closing from:
110° to 65° (using 110° template)
160° to 75° (using 180° template)
Delay time adjustable up to approximately 1 minute
110°:
A = 5-7/8˝ (149 mm)
B = 10-7/8˝ (276 mm)
or *180°
A= 2-7/8˝ (73 mm)
B = 7-7/8˝ (200 mm)
Hold-open points up to maximum opening with hold-open arm
*Frame and trim permitting.
28
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1460
Series
Mounting details
A
2"
51 mm
B
2-3/8"
60 mm
2-11/16"
68 mm
11-3/8"
289 mm
12-1/4"
311 mm
3/4"
19 mm
Top Jamb (Push Side)
Mounting
1-7/8"
48 mm
Optional
Non-handed Designer Series Metal Cover
12-1/2"
318 mm
12-3/8"
314 mm
1461-18
3"
76 mm
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point or where a door cannot swing 180°
Reveal
Arm Type
Reveal
Max Opening
Regular Arm
4-7/8˝
Up to 140°
Regular Arm
3-1/2˝
Up to 180°
Long Arm
7˝
Up to 140°
Hold-Open Arm
2-1/2˝
Up to 180°
Long Hold-Open Arm
4-7/8˝
Up to 140°
Top Rail
Requires 1-7/8˝ (48 mm) minimum. 2-3/4˝ (70 mm) minimum with closer on PLATE, 1460-18
Head Frame
Less than 1-3/4˝ (44 mm) requires PLATE, 1460-18. For flush ceiling condition with 2˝ (51 mm) head frame, use PLATE,
1460-18
Delayed Action
n
n
n
Maximum opening
Add suffix “DEL” to selected cylinder (eg. 1460 DEL).
Delays closing:
110° to 75° (using 110° template)
180° to 95° (using 180° template)
Delay time adjustable up to approximately 1 minute.
110°:
A= 6-3/4˝ (169 mm)
B = 11-1/4˝ (286 mm)
101° to 120°: A= 3˝ (76 mm)
B = 7-1/2˝ (191 mm)
Hold-open points up to maximum opening with hold-open arm.
*Frame and trim permitting.
29
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1460
Series
Mounting details
Parallel Arm
(Push Side) Mounting
B
4"
102 mm
4-3/8"
111 mm
2-3/8"
60 mm
A
4"
102 mm
19-1/8"
486 mm
2"
51 mm
12-1/4"
311 mm
1460-18PA
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point, where a door cannot swing 180°, or where CUSH-N-STOP arm is not used
Top Rail
n
n
n
L ess than 4-3/8˝ (111 mm) measured from the stop requires PLATE, 1460-18PA. With Full cover, use PLATE, 146018PAFC
Plate requires 1-3/4˝ (44 mm) minimum. Plate requires 1-1/4˝ (32 mm) minimum
With Designer Series metal cover, use PLATE, 1460-18PADS1
Clearance
1460-62PA shoe projects 4˝ (102 mm) from door face
Head Frame
Flush or single rabbeted requires PA SHOE ADAPTER, 1460-419
Stop Width
Minimum 1˝ (25 mm)
Blade Stop
Clearance, requires 1/2˝ (13 mm) BLADE STOP SPACER, 1460-61
Auxiliary Shoe
n
n
Delayed Action
n
n
n
Maximum opening
1460-62A allows installation of regular arm with overhead holder/stop
Special templating required
Add suffix “DEL” to selected cylinder (eg. P1460 DEL)
Delays closing from maximum opening to approximately 75°
Delay time adjustable up to approximately 1 minute
Regular or hold-open arm can be templated to
100°:
A = 4-1/4˝ (108 mm)
B = 9-1/4˝ (235 mm)
or 180°:
A= 1-3/4˝ (44 mm)
B = 6-3/4˝ (171 mm)
Hold-open points up to maximum opening with hold-open arm.
Notes:
• Optional mounting requires PA SHOE, 1460-62PA for REGULAR or HOLD-OPEN arms. Add prefix “P” to closer description (e.g. P1460)
• P1460 closer includes 1460-201 FIFTH HOLE SPACER to support PA SHOE.
30
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
EDA mount
8-5/8"
219 mm
1460
Series
4"
102 mm
4-1/4"
108 mm
2-3/8"
60 mm
19-9/16"
497 mm
5-1/2"
140 mm
1-1/4"
32 mm
2"
51 mm
12-1/4"
311 mm
Mounting details
EDA and CUSH
mounting
1460-18PA
CUSH mount
B
4"
102 mm
4-1/4"
108 mm
2-3/8"
60 mm
5-1/2"
140 mm
19-9/16"
497 mm
A
2"
51 mm
12-1/4"
311 mm
1461PA-18
Spring CUSH
Hold open points are approximately 5° less than dead stop point
Clearance
1460-62EDA or CUSH shoe projects 5-1/2˝ (140 mm) from door face
Head Frame
Flush or rabbeted requires PA FLUSH PANEL ADAPTER, 1460-419
EDA or CUSH ARM
Requires SHOE SUPPORT, 1460-30 for fifth screw anchorage where reveal is less than 3-1/16˝ (78 mm)
Maximum opening
EDA template allows 110°
Hold-open point up to maximum opening
CUSH arms can be templated for
maximum opening/hold-open point at
85°:
A = 2-3/8˝ (60 mm)
B = 9-9/16˝ (243 mm)
90°:
A = 1-5/8˝ (41 mm)
B = 9-1/16˝ (230 mm)
100°:
A = 5/8˝ (16 mm)
B = 8-1/16˝ (205 mm)
Note:
• 1460 closers ordered with EDA, CUSH or SPRING CUSH arms include 1460-201 FIFTH HOLE SPACER to support the shoe
31
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1460
Series
Accessories
Cylinders
Covers
1461-3071
Cast Iron Cylinder Assembly
1460-72
Slim Line Plastic Cover
1460-72DS
Designer Series Metal Cover
1460-72FC
Full Cover
n
Non-Handed
n
Non-Handed
n
Non-Handed
n
n
Standard
n
Standard
n
Plastic cover
n
n
Optional
n
n
Non-Handed
rovides complete enclosure
P
with a stylish look
equired for plating and
R
custom powder coat option
Optional
Installation Accessories
1460-18
Plate
1460-18DS1
Plate
1460-18FC
Plate
The following details pertain to the above plates:
n
n
n
1460-30A
Mounting Bracket
1460-30
Cush Shoe Support
n
Required for hinge side mount where top rail is less than 2-1/2˝ (64 mm)
equired for top jamb mounting where head frame is less than 1-3/4˝ (44 mm)
R
or flush ceiling condition exists
rovide anchorage for fifth
P
screw used with CUSH arm
where reveal is less than
3-1/16˝ (78 mm)
n
racket to be used when
B
installing cylinder body
Included with cylinder when
ordered
n
equires minimum 1-1/2˝ (38 mm) minimum top rail or 1-1/4˝ (32 mm) head
R
frame
n
With full cover, use PLATE, 1460-18FC
n
With Designer Series metal cover, use PLATE, 1460-18DS1
Note: 18FC and 18DS will not work in top jamb application.
1460-61
Blade Stop Spacer
1460-62A
Auxiliary Shoe
Lowers parallel arm shoe to
clear 1/2˝ (13 mm) blade stop
n
1460-18PA
Plate
1460-18PADS1
Plate
n
n
Requires a top rail of 7˝ (178 mm)
ptional shoe replaces -62PA for
O
parallel arm mounting of regular
arm with overhead holder/stop
1460-18PAFC
Plate
The following details pertain to the above plates:
n
equired for parallel arm mounting where top rail is less than 4-3/8˝ (111 mm),
R
measured from the stop
n
Requires 1-3/4˝ (44 mm) minimum top rail
n
With full cover, use PLATE, 1460-18PAFC
n
With Designer Series metal cover, use PLATE, 1460-18PADS1
1460-419
PA Flush Panel Adapter
n
32
rovides horizontal mounting
P
surface for PA, EDA, or CUSH
shoe on single rabbeted or
flush frame
1460-62PA
PA Shoe
n
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
equired for parallel arm
R
mounting
1460
Series
Arms
Accessories
1460-3077
Regular Arm
Non-handed
Non-handed
n
n
n
Mounts hinge side or top jamb
n
1460 closer includes PA SHOE,
P
1460-62PA required for parallel
arm mounting
n
Non-handed
Optional
n
Non-handed
Mounts hinge side, top jamb or
parallel arm (62PA required)
Hold-open adjustable at shoe
n
Optional
1460-3049EDA
Hold-Open Extra Duty Arm
Non-handed
Handed arm
n
F eatures solid forged
steel main and forearm
for potentially abusive
installations
n
Includes LONG HEAD AND TUBE,
1460-3048L for top jamb mount
with deep reveals
n
n
1460-3077EDA/62G
Extra Duty Arm w/ 62G
Non-handed
Optional
n
n
n
Optional
n
Mounts hinge side, top jamb or
parallel arm
1460-3049L
Long Hold-Open Arm
n
1460-3077EDA
Extra Duty Arm
n
Optional
Non-handed
Includes long rod and shoe, 146079LR for top jamb mounts with
deep reveals
Non-handed
n
F eatures solid forged steel main
and forearm for potentially
abusive installations
n
1460-3077CNS
Cush-N-Stop® Arm
n
rovides hold-open function
P
adjustable at shoe
Optional
n
Features solid forged steel main
arm and forearm with stop in soffit
shoe
n
Optional
n
ptional 1460-3077EDA/62G
O
for blade stop clearance
Non-handed
Non-handed
n
Non-handed
n
rovides hold-open function with
P
templated stop/hold-open points
n
Handle controls hold-open
function
n
Optional
1460-3049SHCNS
Spring HCUSH Arm
1460-3077SCNS
Spring CUSH Arm
1460-3049CNS
HCUSH Arm
n
I ncludes LONG ROD AND SHOE,
1460-79LR for top jamb mount
with deep reveals
n
n
n
n
1460-3049
Hold-Open Arm
n
n
Non-handed
n
1460-3077HDL
Heavy Duty Long Arm
n
1460-3077HD
Heavy Duty Regular Arm
1460-3077L
Long Arm
n
F or abusive applications features
solid forged steel main arm and
forearm with spring loaded stop in
the soffit shoe
n
Optional
n
F or abusive applications features
solid forged steel main arm and
forearm with spring loaded stop in
the soffit shoe. Handle controls
hold-open function
Optional
n
33
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1460
Series
Ordering Information
How-to-order 1460 Series closers
Closer will be shipped with:
- Standard cylinder
- Standard cover
- Regular arm
- Self-reaming and tapping screws
Select finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary,
Light Bronze, Black, Brass
unless options listed below are selected.
Closer options
Cylinder
Delayed Action (DEL)
Cover
Full cover (FC)
Designer series cover (DS)
Finish
Custom Powder Coat (RAL) ________
(DS cover required)
Plated Finish, US ________
(DS cover required)
SRI primer (for use with powder coat finishes only)
Arm
Optional screw packs
TB* w/Self-Reaming and Tapping Screws (TBSRT)
Wood & Machine Screw (WMS)
TB*, Wood & Machine Screw (TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTORX)
* Specify door thickness if other than 1-3/4˝
Installation accessories
Plate, 1460-18
Plate, 1460-18DS
Plate, 1460-18FC
Plate, 1460-18PA
Plate, 1460-18PADS
Plate, 1460-18PAFC
CUSH Shoe Support, 1460-30
Blade Stop Spacer, 1460-61
Auxiliary Shoe, 1460-62A
PA Flush Panel Adapter, 1460-419
Table of sizes
n
n
Extra Duty Arm (EDA) (optional -62G)
Hold-Open Extra Duty (HEDA)
(specify handing), (optional -62G)
Cush-N-Stop (CUSH)
HCush (HCUSH)
Spring Cush (SCUSH)
Spring HCush (SHCUSH)
Special template
ST- ________
Select closer based on width of door
The spring power of a 1461 cylinder is field adjustable from size 1 through size 6 and is shipped adjusted to size 3
Exterior (and Vestibule) door width
Interior door width
24˝
30˝
36˝
42˝
610mm
762mm
914mm
1067mm
*1461
Regular w/62PA (Rw/PA)
Long (LONG)
Regular w/62A (Rw/62A)
Hold-Open (H)
Hold-Open w/62PA (Hw/PA)
Long Hold-Open (HLONG)
Heavy Duty (HD)
Heavy Duty w/62A (HD/62A)
Heavy Duty w/62PA (HD/PA)
Heavy Duty Long (HDL)
size 3
size 4
size 5
48˝
1219mm
size 6
24˝
34˝
38˝
48˝
54˝
610mm
864mm
965mm
1219mm
1372mm
size 2
*1461
Minimum door width
size 3
size 4
size 5
54˝
1524mm
size 6
Minimum door width
Indicates recommended range of door width for closer size.
* Adjustable Size 1 thru 5.
Reduced opening force 1460 Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for information on
systems that meet reduced opening force requirements
without affecting closing power.
DOOR WIDTH
* Maximum opening force.
34
36˝
n
fax: 800-248-1460
n
48˝
8.5* lbs.
1461
1461
1461
5.0* lbs.
1461
1461
1461
LCN Door Control Catalog
phone: 877-671-7011
42˝
www.allegion.com/us
n
009426 rev. 2/16
1460T
Series
Features
The 1460T is a fully universal slim line, single lever (track) arm closer designed for interior
use on narrow head frames and top rails. The modern styling and small projection make it
an excellent choice for interior doors.
Certifications
Body Construction
Cover
Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
n
n
n
n
n
Cast Iron Body
Full Complement Bearing
1-1/4˝ Diameter Piston
5/8˝ Diameter Single Heat Treated
Pinion Journal
Fluid
All Weather Fluid
Handing
Non-Handed
Templating
Peel-n-Stick templates 1˝ x 7-1/2˝ Mounting Hole Pattern
n
Fasteners
Self Reaming and Tapping Screws (SRT)
Mounting
Hinge pull side, top jamb, pull stop face
Arms
Single level with track roller
Finishes/Colors/
Powder Coat
n
n
n
n
n
n
n
Size
Adjustable Non-Sized 2-4
n
n
30 years
Special
Templates
Optional SRI primer - powder coat only
Optional plated finishes
CYLINDER
ND
ED
SI
AC ZE
CE D
S
DE SIB
LA ILI
YE TY
D
AC
TI
ON
RE
GU
LA
ST R (D
AN
OU
D
B
HE ARD LE)
AV
(S
IN
Y
HO DU GLE
LD TY )
ED OPE
N
A/
H
CU EDA
SH
/
SC HCU
US SH
H/
SH
CU
SH
*ARM FUNCTION
N-
N-
HA
SE
RI
ES
COVER
NO
PO
W
D
PL ER C
AT
O
ED AT
FINISH
NO
MOUNTING
HI
NG
E(
TO PUL
L)
P
SI
J
TO AM DE
B
P
JA (PU
PA MB LL)
RA
(
L PU
ST LEL SH
OP
AR )
FA M
CE
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
PL
AS
T
M IC
ET
AL
DE
SI
GN
ER
Warranty
Slim Line, Standard
Full Plastic or Full Metal Designers Series,
Optional
D
180
AVAILABLE
NOT AVAILABLE
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening/hold-open point with standard template.
D = For designer series only.
35
LCN Door Control Catalog
phone: 877-671-7011
115
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1460T
Series
Mounting details
Hinge (Pull) Side
Mounting
2-1/2"
64 mm
1-7/16"
37 mm
22-3/4"
578 mm
1-1/4"
32 mm
12-1/4"
311 mm
3-15/16"
100 mm
2-3/8"
60 mm
2"
51 mm
2-1/2"
64 mm
Optional
Non-handed Designer Series Metal Cover
12-1/2"
318 mm
1460T-18
12-3/8"
314 mm
3"
76 mm
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
n
n
Recommended where a door cannot swing 180°
Optional track bumper assembly assists backcheck in cushioning the opening swing of the door.
It is not intended to replace an auxiliary stop
Reveal
Should not exceed 1/8˝ (3 mm)
Top Rail
n
n
n
n
Less than 2-1/2˝ (64 mm) requires PLATE, 1460T-18
Plate requires 1-1/2˝ (38 mm) minimum
With Full cover, use PLATE, 1460T-18FC
With Designer Series metal cover, use PLATE, 1460T-18DS
Clearance
2-3/8˝ (60 mm) behind door required for installation
Maximum opening
n
n
n
n
n
n
Templating allows up to 180°, trim and frame permitting, limited to 115° when optional bumper is installed
Consult factory if door will be held open at 180°
Hold-open points at 85°, 90°, 95°, 100°, 110° or 115° with hold-open tracks
Please note that many track style door closers are capable of allowing 180° of door swing
Be aware that the majority of track style closers are at their weakest closing force in the 180°-130° range
Consult factory for applications where an exterior or large/heavy door must swing 180°
36
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1460T
Series
Mounting details
Top Jamb (Pull Side)
Mounting
1"
25 mm
12-1/4"
311 mm
2-3/8"
60 mm
1-1/4"
32 mm
22-3/4"
578 mm
2-1/8"
54 mm
1-1/16"
27 mm
Optional
1460T-18
Non-handed Designer Series Metal Cover
12-1/2"
318 mm
12-3/8"
314 mm
3"
76 mm
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
n
n
Recommended where a door cannot swing 180°
Track bumper assembly assists backcheck in cushioning the opening swing of the door.
It is not intended to replace an auxiliary stop
Reveal
Should not exceed 1/8˝ (3 mm)
Top Rail
Minimum 1-1/4˝ (32 mm)
Head Frame
n
n
n
n
Less than 2-3/4˝ (70 mm) requires PLATE, 1460T-18
Plate requires 1-3/4˝ (44 mm) minimum
With full cover, use PLATE, 1460T-18FC
With Designer Series metal cover, use PLATE, 1460T-18DS
Clearance
1-1/4˝ (32 mm) behind door for installations
Maximum opening
n
n
n
n
n
n
Templating allows up to 180°, limited to 115° when optional bumper is installed
Consult factory if door will be held open at 180°
Hold-open points at 85°, 90°, 95°, 100°, 110° or 115° with hold-open tracks
Please note that many track style door closers are capable of allowing 180° of door swing
Be aware that the majority of track style closers are at their weakest closing force in the 180° – 130° range
Consult factory for applications where an exterior or large
37
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 5/16
1460T
Series
Mounting details
Stop Face (Push Side)
Mounting
2-7/8"
73 mm
22-3/4"
578 mm
2-3/8"
60 mm
12-1/4"
311 mm
1-1/4"
32 mm
2"
51 mm
7/8"
22 mm
1460T-18PA
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
n
n
Top Rail
n
n
n
Recommended where a door cannot swing 110°
Track bumper assembly assists backcheck in cushioning the opening swing of the door.
It is not intended to replace an auxiliary stop
Less than 4˝ (102 mm) measured from the stop face requires PLATE, 1460T-18PA.
Plate requires 1-1/2˝ (38 mm) minimum
With Full cover, use PLATE, 1460T-18PAFC
With Designer Series metal cover, use PLATE, 1460T-18PADS
Clearance
1460T projects 2-3/8˝ (60 mm) from door face
Stop Width
Minimum 1-1/4˝ (32 mm)
Maximum opening
n
n
Templating allows 110°, limited to 100° when optional bumper is installed
Variable hold-open angles with infinite options
38
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4"
102 mm
1-1/16"
27 mm
1460T
Series
Accessories
Cylinders
Arm
1460(1)T-3071
Cast Iron Cylinder Assembly
1460T-3077T
Single Lever Standard Arm
Non-handed
Non-handed
n
n
1461 adjustable 1-2
n
1461T adjustable 2-4
n
Standard
n
Mounts hinge side, top jamb, or
stop face
n
rack roller not included with
T
arm
n
Covers
1460T-72
Slim Line Plastic Cover
1460T-72FC
Full Plastic Cover
Non-handed
Non-handed
n
n
1460T-72DS
Designer Series Metal Cover
Non-handed
n
Standard
n
n
Optional
n
n
equired for plating option
R
and custom powder coat
finishes
Optional
Tracks
1460T-3038
Track
Non-handed
n
Non hold-open
n
n
n
n
Mounts on either side of the door
Will accept hold-open clip and/
or bumper assembly
Non-handed
n
Non hold-open
n
n
n
n
Standard
1460T-3038H
Track with Hold-Open
1460T-3038B
Track with Bumper
ounts on either side of the
M
door
Non-handed
n
Hold-open
n
n
Will accept hold-open clip
n
Will accept bumper assembly
n
Optional
n
Optional
phone: 877-671-7011
fax: 800-248-1460
www.allegion.com/us
n
n
ounts on either side of the
M
door
Optional
39
LCN Door Control Catalog
n
Non-handed
Hold-open
ounts on either side of the
M
door
n
n
1460T-3038HB
Hold-Open Track with Bumper
n
009426 rev. 2/16
1460T
Series
Accessories
Installation Accessories
1460T-18
Plate
1460T-18DS
Plate
1460T-18FC
Plate
The following details pertain to the above plates:
n
Required for hinge side mount where top rail is less than 2-1/2˝ (64 mm)
n
Required for top jamb mount when head frame is less than 2-3/4˝ (70 mm)
n
Requires minimum 1-1/2˝ (38 mm) top rail or 1-3/4˝ (44 mm) head frame minimum
n
With Full cover, use PLATE, 1460T-18FC
n
With Designer Series metal cover, use PLATE, 1460T-18DS1
1460T-18PA
Plate
1460T-18PADS
Plate
1460T-18PAFC
Plate
1460T-30A
Mounting Bracket
The following details pertain to the above plates:
Required for stop face mounting where top rail is less than 4˝ (102 mm), measured from the stop
n
Requires 1-1/2˝ (38 mm) minimum top rail
n
With Full cover, use PLATE, 1460T-18PAFC
n
With Designer Series metal cover, use PLATE, 1460T-18PADS1
1460T-169
Track Bumper
n
n
n
ounts in track to assist
M
backcheck, does not replace
auxiliary stop
Limits maximum opening
Included with cylinder when
ordered
n
1460T-3054
Hold-Open Clip
n
Used when installing cylinder
body
n
n
1460T-3034
Track Roller
Mounts in track to provide
hold-open function
Hold-open point controlled
by clip location
n
n
1460T-3034H
Hold-Open Track Roller
uiet, low friction roller
Q
assembly
Hold-open roller
n
n
Shoulder dimension
“X” = 1/8˝ (3 mm)
n
Quiet, low friction roller assembly
Shoulder dimension
“X” = 1/8˝ (3 mm)
n
C onsists of bumper, bumper post,
and mounting screw
Spring-loaded hold-open
mechanism
n
40
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1460T
Series
How-to-order 1460T Series closers
Accessories
Closer will be shipped with:
- Standard cover
- Standard arm
- Standard track
- Track roller
- Self-reaming and tapping screws
1. Select cylinder size
1461T (adjustable from size 1 to 2)
1460T (adjustable from size 2 to 4)
2. Select finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary,
Light Bronze, Black, Brass
unless options listed below are selected.
Closer options
Cover
Full cover (FC)
Designer Series metal cover (DS)
Finish
Custom Powder Coat (RAL) ___________
(DS cover required)
Plated Finish, US ___________
(DS cover required)
SRI primer (for use with powder coat finishes only)
Track
Standard with Bumper (BUMPER)
Hold-Open (H)
Hold-Open with Bumper (HBUMPER)
Special template
ST- ________
Optional screw packs
TB* w/Self-Reaming and Tapping Screws
(TBSRT)
Wood & Machine Screw (WMS)
TB*, Wood & Machine Screw (TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTRX)
* Specify door thickness if other than 1-3/4˝
Installation accessories
Plate, 1460T-18
Plate, 1460T-18DS1
Plate, 1460T-18FC
Plate, 1460T-18PA
Plate, 1460T-18PADS1
Plate, 1460T-18PAFC
Table of sizes
Select closer based on width of door. The spring power of a 1460T cylinder is adjustable from size 2 to
n
n
n
size 4 and is shipped adjusted to size 3
The closing power of 1460T series cylinders may be increased 50%
The spring power of a 1461T cylinder is adjustable from size 1 to size 2 and is shipped adjusted to size 1
Interior door width
Interior door width
26˝
34˝
38˝
660mm
864mm
965mm
*1460T
size 2
48˝
size 3
1219mm
size 4
26˝
34˝
660mm
864mm
*1461T
Minimum door width
size 2
Minimum door width
Indicates recommended range of door width for closer size.
*Adjustable Size 2 thru 4
Indicates recommended range of door width for closer size.
*Adjustable Size 1 thru 2
Reduced opening force 1460T Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for information on
systems that meet reduced opening force requirements
without affecting closing power.
* Maximum opening force.
DOOR WIDTH
36˝
42˝
48˝
8.5* lbs.
N/A
N/A
N/A
5.0* lbs.
1461T
1461T
1461T
41
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
42
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Concealed
closer series
Product selection guide
The concealed LCN closers feature a modern design for concealment in either the head frame or top
rail of the door. This guide is based on the desired mounting of the closer.
EXTERIOR
DOOR
CONCEALED IN
TUBE FRAME
CONCEALED
IN FRAME
DOUBLE
LEVER ARM
SINGLE
LEVER ARM
2010 2210**
5010
SINGLE
LEVER ARM
2030 6030
DOUBLE
LEVER ARM
5030
INTERIOR
DOOR
CONCEALED
IN FRAME
DOUBLE
LEVER ARM
CONCEALED IN
TUBE FRAME
SINGLE
LEVER ARM
2010 2210**
5010
DOUBLE
LEVER ARM
5030
CONCEALED
IN DOOR
SINGLE
LEVER ARM
2030 6030
DOUBLE
LEVER ARM
3030
SINGLE
LEVER ARM
3130 3130SE***
** INDICATES HIGH SECURITY CLOSER, DOOR POSITION SWITCH OPTIONAL. REFER TO HIGH SECURITY SECTION OF THE CATALOG.
*** INDICATES FIRE LIFE SAFETY CLOSER. REFER TO FIRE LIFE SAFETY SECTION.
Product comparison
This chart shows a basic comparison of LCN concealed closers. Refer to the specific closer chapter for complete details.
N
180°
110°
180°
110°
180° 140°
3030
140°
3130
100°
180° 100°
5010
180° 100°
5030
95°
6030
AVAILABLE
NOT AVAILABLE
RE
ST
AN
SI
HA
2030
*ARM FUNCTION
DA
R
GU D (S
IN
LA
HO R (D GLE
LD OU )
B
-O
PE LE)
ARM
ED
ZE
D
AC
CE
S
DE SIB
LA ILI
YE TY
D
AC
TI
ON
CO
NC
E
EX ALE
PO
D
SE
D
CYLINDER
ND
ED
AT
W
DE
R
CO
AT
FINISH
PL
IN
PO
DO TUB
OR E
4˝
3/
1-
FR
IN
IN
CLOSER
SERIES
2010
AM
E
CONCEALED
MOUNTING
95°
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening/hold-open point with standard template. See individual closer series for degrees of opening per
installation.
1
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Concealed
closer series
APPLICATIONS
n
n
n
n
n
FINISHES
For aluminum, hollow metal, or wood doors and frames.
Can be used with hinge or pivot mounted door.
Closers for 4˝ or minimum 1-3/4˝ head frame or 4˝ top rail.
Mounting clips for wood frames and other installation accessories
available for unusual conditions.
For concealed in door closers consult factory for installations with
pivots.
n Available in six standard or a wide selection of optional custom
powder coat finishes to blend with door and frame.
n LCN’s powder coat finishes surpass 100 hours of salt spray which is
over four times the ANSI standard for corrosion resistance.
n For installations where a higher level of corrosive resistance is
FEATURES COMMON TO CONCEALED CLOSERS
n
n
n
n
n
n
Mountings for head frame or door top rail.
Handed for right or left swinging doors. (except 6030)
Closers to meet ADA reduced opening force requirements.
Adjustable hydraulic backcheck cushions opening swing prior to 90°.
Separate regulation of general closing speed and latching speed.
Joints in arm and shoe adapt to uneven trim. (for double lever arms)
n
required, LCN offers an optional special rust inhibiting (SRI) pretreatment. Closers that combine the exclusive LCN powder coat finish
and the SRI pre-treatment exceed the ANSI standard for corrosion
resistance even further.
Plated finishes are available as an option to accent door and frame.
(SRI not available with plated finishes)
LISTINGS & APPROVALS
UL listed for self-closing doors without hold-open under “SWINGING DOOR
CLOSERS” (GVEV) file R 1943.
Tested and certified under ANSI Standard A156.4. Consult factory for
details.
Consult factory for other listings such as; cUL, California State Fire Marshal,
Bureau of Standards and Appeals.
DESIGN ASSISTANCE
LCN has been providing reliable solutions to unique door control problems
since 1925. Design and specification assistance are only a phone call away.
Contact LCN for assistance or technical information at 877-671-7011
or FAX 800-248-1460 (Order Entry), Fax 815-879-1495 for
Product Support.
POSITIVE PRESSURE
LCN closers have been certified for three hours by UL to be in compliance
with UL 10 C. Contact LCN for specific details on door closer fire ratings.
WARRANTY
15 year limited warranty. See General Information Section for complete
warranty details.
FASTENERS
Standard WOOD and MACHINE SCREW (WMS) pack contains phillips head
wood and machine screws to install the closer.
TORX machine screws are available for some closers.
SPECIFICATIONS
Refer to “SPECIFICATIONS”section for suggested architectural
specifications.
Note 1: Phillips head, metric machine screws are available, please specify.
MAINTENANCE
MATERIALS
Closers mounted according to LCN installation instructions require no
periodic maintenance or adjustments.
(Closers concealed in the door or frame)
n High strength cast iron cylinder.
n Forged steel main arms (except 6030).
n One piece forged steel piston.
n A
ll weather fluid in overhead concealed models performs to
temperature ranges from 120°F (49°C) to -30°F (-35°C) without any
seasonal adjustment.
n High efficiency, full complement, low friction bearings.
n Tamper resistant regulating screws.
n Full rack and pinion hydraulic action.
n Q
uiet, low friction track and roller combination for all single lever
(standard) arm closers.
2
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2010
Series
Features
The concealed 2010 Series is a heavy duty closer designed to provide complete
concealment. The single lever arm and roller assembly provide smooth, quiet door control
and the choice of finishes and track functions meet virtually all architectural requirements.
Grade 1 - ANSI A156.4, UL 10 C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
n
Arms
Standard arm and track
Finishes/Colors/
Powder Coat
n
n
n
n
Fluid
All Weather Fluid
Handing
Handed
n
Size
Sized 1-6
n
Warranty
15 years
n
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
E)
GL
IN
(S
R
D
LA
AR
GU
RE
ND
180°
AVAILABLE
NOT AVAILABLE
*ARM FUNCTION
ST
A
DE
AC
D
ZE
HA
ND
ED
CO
R
ED
DE
AT
W
ARM
CE
SS
IB
LA ILI
YE TY
D
AC
TI
ON
CO
NC
E
EX ALE
PO
D
SE
D
CYLINDER
AT
FINISH
PL
PO
4˝
DO TUB
OR E
IN
IN
13/
FR
AM
E
CONCEALED
MOUNTING
IN
Optional SRI primer - powder coat only
Optional plated finishes
n
SI
Special
Templates
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
n
110°
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening/hold-open point with standard template. See individual closer series for
degrees of opening per installation.
3
LCN Door Control Catalog
phone: 877-671-7011
OP BLE
EN )
n
Cast Iron Body
Full Complement Bearing
1-1/2˝ Diameter Piston
11/16˝ Diameter Double Heat Treated
Pinion Journal
Concealed (in frame); aluminum frame
requires minimum 4˝ x 4˝ (102 mm) tube
OU
n
Mounting
LD
-
n
Wood and Machine Screw Pack
(D
Body Construction
Fasteners
HO
Certifications
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2010
Series
Mounting details
Concealed
Mounting
5-5/16"
135 mm
3-5/8"
92 mm
14"
356 mm
3/8"
10 mm
10"
254 mm
2-1/16"
52 mm
1"
25 mm
1-1/4"
32mm
1/4"
6mm
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
n
n
Top Rail
n
n
n
1-3/4˝ (44 mm) minimum
Consult factory for installation instructions
Maximum opening
n
n
n
n
n
n
n
of Track
of Closer
1-3/8˝ (35 mm) mortise required
With Fire Shield, 1-13/32˝ (36 mm) mortise required
5/16˝ (8 mm) cutout required at top of the door, stop face only
Door Thickness
n
to
1-3/8"
35 mm
Recommended where a door cannot swing 180°
Optional track bumper assembly assists backcheck in cushioning the opening swing of the door (not intended to
replace an auxiliary stop).
Hollow Metal Frame
n
22-1/2"
572 mm
1-1/16"
27 mm
Butt hinge template allows 180°, trim permitting
Limited to 110° when optional bumper is installed
Adjustable hold-open points from 85° to 110°, with hold-open track
Offset pivot template allows 110°, trim permitting
Limited to 95° when optional bumper is installed
Adjustable hold-open points from 75° to 95°, with hold-open track
Center pivot template allows 120°, trim permitting
Limited to 95° when optional bumper is installed
Adjustable hold-open points from 75° to 95°, with hold-open track
Notes:
• For interior or exterior doors
• Single acting cylinder in head frame
• Concealed arm and track in door top rail
4
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2010
Series
Accessories
Cylinders
Cylinder
Arm
Installation Accessories
2010-3077T
Standard Arm
2010-420
Fire Shield
2011(3)(4)(5)(6)-3071
Cast Iron Cylinder Assembly
Handed
Handed
n
n
n With mounting plate
n
Standard
n
2010-169
Track Bumper
22 gauge steel liner mounts in the
track mortise of the door’s top rail
for 20 minute labeled wood doors
n
rack roller not included with
T
arm
n
Mounts in track to assist backcheck
n
Limits maximum opening
n
C onsists of bumper, bumper post,
and mounting screw
NOTE: Track bumper does not replace
auxiliary stop.
Tracks
2010-3038
Standard Track
2010-3038B
Standard Track with Bumper
Non-handed
n
Non hold-open
n
Non-handed
n
Will accept hold-open clip
and/or bumper assembly.
n
n
n
Will accept hold-open clip
Optional
n
n
Standard
2010-3038H
Hold-Open Track
2010-3038HB
Hold-Open Track with Bumper
Non-handed
n
n
n
Non hold-open
n
n
2010-3054
Hold-Open Clip
Will accept bumper assembly
n
Optional
n
n
Optional
n
Mounts in track to provide holdopen function
old-open point controlled by clip
H
location
phone: 877-671-7011
fax: 800-248-1460
n
n
Quiet, low friction roller assembly
houlder dimension “X” = 1/16˝
S
(2mm)
Requires 2010-3034H
Quiet, low friction roller assembly
houlder dimension “X” = 1/16˝
S
(2mm)
5
LCN Door Control Catalog
n
n
2010-3034H
Hold-Open Track Roller
Non-handed
n
2010-3034
Track Roller
www.allegion.com/us
n
009426 rev. 2/16
2010
Series
Ordering Information
How-to-order 2010 Series closers
Closer will be shipped with:
- Standard cylinder with finish plate
- Standard arm
- Standard track
- Wood and machine screw pack
Table of sizes
n Select closer based on width of door.
n 2010 Series cylinders available in size 1, 3, 4, 5, or 6.
n Closing power of all 2010 Series closers may be increased 15%.
n Specify next higher size closer where strong drafts exist.
Select cylinder size
2011
2013
2014
2015
2016
unless options listed below are selected.
Select hand
RH
LH
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass.
Closer options
Tracks
Standard with Bumper (BUMPER)
Hold-open (H)
Hold-open with Bumper (HBUMPER)
Finishes
Custom Powder Coat (RAL)_____________
Plated Finish, US ______________
SRI primer (use with powder coat finishes only)
Installation accessories
Fire Shield, 2010-420
Screw pack
TORX Machine Screw (TORX)
Special template
ST- ________
Exterior (and Vestibule) door width
2013
2014
2015
2016
Interior door width
28˝
30˝
36˝
42˝
48˝
28˝
34˝
38˝
48˝
54˝
60˝
711mm
762mm
914mm
1067mm
1219mm
711mm
864mm
965mm
1219mm
1372mm
1524mm
size 3
size 4
size 5
size 6
size 3
2013
2014
2015
2016
Minimum door width
size 4
size 5
size 6
Minimum door width
Indicates recommended range of door width for closer size.
Reduced opening force 2010 Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for information on
systems that meet reduced opening force requirements
without affecting closing power.
* Maximum opening force.
6
DOOR WIDTH
36˝
42˝
48˝
8.5* lbs.
2014
2014
2015
5.0* lbs.
2011
2011
2013
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2030
Series
Features
The concealed 2030 Series PACER® is a heavy duty closer designed to fit in a narrow,
minimum 1-3/4˝ aluminum transom. The single lever arm and roller assembly provide
smooth, quiet door control and the choice of finishes and track functions meet virtually all
architectural requirements.
Grade 1 - ANSI A156.4, UL 10 C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
Standard arm and track
Finishes/Colors/
Powder Coat
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
n
n
n
n
Fluid
All Weather Fluid
Handing
Handed
Size
Sized 1-5
Warranty
15 years
n
n
Optional SRI primer - powder coat only
Optional plated finishes
n
n
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
180°
E)
110°
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening/hold-open point with standard template. See individual closer series for degrees of opening per
installation.
AVAILABLE
NOT AVAILABLE
AVAILABLE
NOT AVAILABLE
7
LCN Door Control Catalog
phone: 877-671-7011
(D
R
LA
GU
AN
DA
RD
(S
IN
GL
E)
*ARM FUNCTION
RE
ST
D
AC
ZE
SI
ND
ED
CO
R
ED
AT
DE
W
ARM
CE
S
DE SIB
LA ILI
YE TY
D
AC
TI
CO
ON
NC
EA
EX
L
PO ED
SE
D
CYLINDER
AT
FINISH
PL
PO
/4
˝
DO TUB
OR E
IN
13
IN
IN
FR
A
M
E
CONCEALED
MOUNTING
HA
Special
Templates
n
PE
N
n
Arms
-O
n
Cast Iron Body
Full Complement Bearing
1 1/8˝ Diameter Piston
11/16˝ Diameter Double Heat Treated
Pinion Journal
BL
n
OU
n
Wood and Machine Screw Pack
Concealed (in tube); aluminum frame
requires minimum 1-3/4˝ (44 mm) x
4˝ (102) mm) tube
LD
Body Construction
Fasteners
Mounting
HO
Certifications
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2030
Series
Mounting details
Concealed
Mounting
5-13/16"
148 mm
10"
254 mm
1-1/4"
32 mm
1"
25 mm
3-23/32"
94 mm
21-7/8"
556 mm
22-1/2"
572 mm
1-1/16"
27 mm
1-5/8"
41 mm
1-3/8"
35 mm
9/64"
4 mm
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
n
n
Top Rail
n
n
n
Recommended where a door cannot swing 180°
Optional track bumper assembly assists backcheck in cushioning the opening swing of the door (not intended to
replace an auxiliary stop).
1-3/8˝ (35 mm) mortise required
With Fire Shield, 1-13/32˝ (36 mm) mortise required
5/16˝ (8 mm) cutout required at top of the door, stop face only
Door Thickness
1-3/4˝ (44 mm) minimum
Hollow Metal Frame
Consult factory for installation instructions
Wood Frame
Installation simplified by WOOD MOUNTING CLIP SET 2030-416 for center pivoted or 2030-417 for offset pivoted and
butt hung installations. Consult factory for preparation details.
Maximum opening
n
Butt hinge template allows 180°, trim permitting
Limited to 110° when optional bumper is installed
Adjustable hold-open points from 85° to 110°, with hold-open track
n
Consult factory if door will be held open at 180°
n
n
n
n
n
n
n
Offset pivot template allows 115°, trim permitting. Limited to 95° when optional bumper is installed
Hold-open point from 85°, with hold-open track
Center pivot template allows 120°, trim permitting
Limited to 100° when optional bumper is installed
Adjustable hold-open points from 85° to 100°, with hold-open track
Notes:
• For interior or exterior doors
• Single acting cylinder in head frame
• Concealed arm and track in door top rail
8
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1460
Series
2030
Series
Accessories
Accessories
Cylinders
Cylinder
Arm
2030-3077T
Standard Arm
2031(2)(3)(4)(5)-3071
Cast Iron Cylinder Assembly
Handed
Handed
n
n
n
With mounting plate
n
Track roller not included with arm
Standard
n
Cylinders
Tracks
2030-3038B
Standard Track with Bumper
2030-3038
Standard Track
2030-3038H
Hold-Open Track
Non-handed
n
Non hold-open
n
Non-handed
Non hold-open
n
n
Will accept hold-open clip
n
n
n
Will accept hold-open clip and/or
bumper assembly
n
n
Non-handed
2030-3038HB
Hold-Open Track with Bumper
Non-handed
n
n
Will accept bumper assembly
Optional
n
Optional
Optional
n
Standard
9
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2030
Series
Accessories
Installation Accessories
2030-420
Fire Shield
22 gauge steel liner mounts in the
track mortise of the door’s top rail
for 20 minute labeled wood doors
n
2030-416
Wood Mounting Clip Set
Simplifies mounting center
pivoted 2030 closer in wood frame
n
Includes latch stile clip, hinge stile
clip, and cover
n
n
n
F or use with Ives Series center
pivots
Includes two clips
n
n
n
Mounts in track to provide holdopen function
old-open point controlled by clip
H
location
n
For use with offset pivots
ounts in track to assist
M
backcheck. Limits maximum
opening.
C onsists of bumper, bumper
post, and mounting screw
NOTE: Track bumper does not
replace auxiliary stop
Consult factory for special
template
2030-3034H
Hold-Open Track Roller
2030-3034
Track Roller
n
n
n
n
Consult factory for special
template
n
implifies mounting offset pivoted
S
or butt hung 2030 closer in wood
frame
n
n
2030-3054
Hold-Open Clip
2030-169
Track Bumper
2030-417
Wood Mounting Clip Set
Quiet, low friction roller assembly
n
houlder dimension “X” = 1/16˝
S
(2mm)
n
Quiet, low friction roller assembly
houlder dimension “X” = 1/16˝
S
(2mm)
equires 2030-3034H Hold-Open
R
Track Roller
10
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1460
Series
2030
Series
Ordering Information
How-to-order 2030 Series closers
Closer will be shipped with:
- Standard cylinder with mounting plate
- Standard arm
- Standard track
- Wood and machine screw pack
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary,
Light Bronze, Black, Brass
Select cylinder size
2031
2032
2033
2034
2035
unless options listed below are selected.
Select hand
RH
LH
Closer options
Tracks
Standard with Bumper (BUMPER)
Hold-open (H)
Hold-open with Bumper (HBUMPER)
Finishes
Custom Powder Coat (RAL)_____________
Plated Finish, US ______________
SRI primer (use with powder coat finishes only)
Installation accessories
Fire Shield, 2030-420
Wood Clip Set, 2030-416
Wood Clip Set, 2030-417
Screw pack
TORX Machine Screw (TORX)
Special template
ST- ________
Table of sizes
n
n
n
n
Select closer based on width of door.
2030 Series cylinders available in size 1, 2, 3, 4, or 5.
Closing power of all 2030 Series closers may be increased 35%.
Specify next higher size closer where strong drafts exist
Exterior (and Vestibule) door width
2033
2034
2035
Interior door width
28˝
30˝
36˝
42˝
28˝
34˝
38˝
48˝
54˝
711mm
762mm
914mm
1067mm
711mm
864mm
965mm
1219mm
1372mm
size 3
size 4
size 5
size 2
2032
2033
2034
2035
Minimum door width
size 3
size 4
size 5
Minimum door width
Indicates recommended range of door width for closer size.
Reduced opening force 2030 Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for information on
systems that meet reduced opening force requirements
without affecting closing power.
* Maximum opening force.
DOOR WIDTH
36˝
8.5* lbs.
5.0* lbs.
phone: 877-671-7011
fax: 800-248-1460
n
www.allegion.com/us
48˝
2033
2033
2034
2031
2032
2032
11
LCN Door Control Catalog
n
42˝
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
12
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
3030
Series
Features
The concealed 3030 Series is designed to mount in a 1-3/4˝ interior door. The double lever
arm provides superior door control and the choice of finishes and arm functions meet
virtually all architectural requirements.
Grade 1 - ANSI A156.4, UL 10 C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
Cast Iron Body
Full Complement Bearing
1 -1/8˝ Diameter Piston
1/2˝ Diameter Double Heat Treated
Pinion Journal
Regular arm
Finishes/Colors/
Powder Coat
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
n
n
n
n
Fluid
All Weather Fluid
Handing
Handed
Size
Sized 1-4
Warranty
15 years
n
n
n
Optional SRI primer - powder coat only
Optional plated finishes
n
n
Special
Templates
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
E)
GL
EN
-O
P
IN
(S
RD
LA
DA
GU
AN
RE
HA
*ARM FUNCTION
E)
ARM
ST
CYLINDER
ND
SI ED
ZE
D
AC
CE
S
DE SIB
LA ILI
YE TY
D
AC
TI
CO
ON
NC
EA
EX
L
PO ED
SE
D
FINISH
D
PL ER C
AT
O
ED AT
IN
PO
W
˝
DO TUB
OR E
3/
4
IN
IN
1-
FR
AM
E
CONCEALED
MOUNTING
BL
n
Arms
OU
n
Concealed (in door); consult factory for
installations with pivots
LD
n
Mounting
(D
n
Wood Screws and Torx Security Screws
(optional)
R
Body Construction
Fasteners
HO
Certifications
180° 140°
AVAILABLE
AVAILABLE
NOT AVAILABLE
NOT AVAILABLE
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening/hold-open point with standard template. See individual closer series for
degrees of opening per installation.
13
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
3030
Series
Mounting details
Concealed
Mounting
B
3/4"
19 mm
15/16"
24 mm
3"
76 mm
1-3/8"
35 mm
A
2-11/16"
68 mm
5/16"
8 mm
8-3/4"
222 mm
11-3/4"
298 mm
3-3/4"
95 mm
4-7/8"
124 mm
1-1/2"
38 mm
8-3/4"
222 mm
1-1/4" dia.
32 mm
9/16"
14 mm
2-15/16"
75 mm
3-3/16"
81 mm
C
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point or where a door cannot swing 180°
Top Rail
Minimum 4˝ (102 mm) required
Door Thickness
n
n
Maximum opening
1-3/4˝ (44 mm) minimum
Please consult the door manufacturer to assure that the door integrity and warranty is maintained after installing
the 3030 Series door closer in a 1-3/4˝ thick wood door
Can be templated for
100°:
A = 3-5/8˝ (92 mm)
B = 10-1/4˝ (260 mm)
130°:
A = 2-5/8˝ (67 mm)
B = 9-1/4˝ (235 mm)
180°:
A = 1-5/8˝ (41 mm)
B = 8-1/4˝ (210 mm)
n
Hold-open points up to maximum opening or 140°, whichever is less, with hold-open arm.
Arm clearance above door
C = 1-1/4˝ (32 mm) minimum
Notes:
• For interior or exterior doors
• Single acting cylinder in top rail of door
• Exposed arm on hinge side of door
14
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
3030
Series
Accessories
Cylinder
Arms
3031(2)(3)(4)-3071
Cast Iron Cylinder Assembly
3030-3049
Hold-open arm
3030-3077
Regular arm
Handed
n
n
Handed
Non-handed
n
With mounting plate
n
n
n
Standard
n
rovides hold-open function,
P
adjustable at elbow
Optional
15
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
3030
Series
Ordering Information
How-to-order 3030 Series closers
Closer will be shipped with:
- Standard cylinder with mounting bracket
- Regular arm
- Wood and machine screw pack
Select cylinder size
3031
3032
3033
3034
unless options listed below are selected.
Select hand
RH
LH
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass.
Closer options
Screw pack
TORX Machine Screw (TORX)
Arm
Hold-open (H)
Finishes
Custom Powder Coat (RAL)___________
Plated Finish, US ______________
SRI primer (use with powder coat finishes only)
Special template
ST- ________
Table of sizes
n
n
n
Select closer based on width of door
3030 Series cylinders available in size 1, 2, 3, or 4
Closing power of all 3030 Series closers may be increased 15%
Interior door width
24˝
34˝
38˝
48˝
610mm
864mm
965mm
1219mm
size 2
3032
3033
3034
size 3
size 4
Minimum door width
Indicates recommended range of door width for closer size.
Reduced opening force 3030 Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for information on
systems that meet reduced opening force requirements
without affecting closing power.
DOOR WIDTH
* Maximum opening force.
16
36˝
n
fax: 800-248-1460
n
48˝
8.5* lbs.
N/A
N/A
N/A
5.0* lbs.
3031
3031
3032
LCN Door Control Catalog
phone: 877-671-7011
42˝
www.allegion.com/us
n
009426 rev. 2/16
3130
Series
Features
The concealed 3130 Series is designed to mount in a 1-3/4˝ interior door. The single lever
arm and roller assembly provides complete concealment and the choice of finishes and
track functions meet virtually all architectural requirements.
Grade 1 - ANSI A156.4, UL 10 C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
Cast Iron Body
Full Complement Bearing
1-1/8˝ Diameter Piston
1/2˝ Diameter Double Heat Treated
Pinion Journal
n
n
Concealed (in door); consult factory for
installation with pivots
Arms
Standard arm and track
Finishes/Colors/
Powder Coat
n
n
n
n
Fluid
All Weather Fluid
Handing
Handed
Size
Sized 1-3
Warranty
15 years
n
n
n
n
n
Special
Templates
(S
IN
RD
DA
GU
RE
AN
HA
*ARM FUNCTION
G
ARM
ST
CYLINDER
ND
SI ED
ZE
D
AC
CE
S
DE SIB
LA ILI
YE TY
D
AC
TI
CO
ON
NC
EA
EX
L
PO ED
SE
D
FINISH
D
PL ER C
AT
O
ED AT
IN
PO
W
˝
DO TUB
OR E
E
3/
4
1-
FR
AM
IN
Optional SRI primer - powder coat only
Optional plated finishes
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
CONCEALED
MOUNTING
IN
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
140°
AVAILABLE
AVAILABLE
NOT AVAILABLE
NOT AVAILABLE
100°
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening/hold-open point with standard template. See individual closer series for
degrees of opening per installation.
17
LCN Door Control Catalog
phone: 877-671-7011
LE
(
LD DOU )
BL
-O
PE E)
N
n
Mounting
R
n
Wood Screws and Torx Security Screws
(optional)
HO
Body Construction
Fasteners
LA
Certifications
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
3130
Series
Mounting details
Concealed
Mounting
2"
50 mm
11-3/4"
298 mm
1-1/16"
27 mm
22-1/2"
572 mm
3/8"
10 mm
4-7/8"
124 mm
1-3/8"
35 mm
1-1/2"
38 mm
1-1/4"
32 mm
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
n
Minimum 4˝ (102 mm) required
Door Thickness
n
3-1/4"
83 mm
1-3/4˝ (44 mm) minimum.
Please consult the door manufacturer to assure that the door integrity and warranty is maintained after installing
the 3130 Series door closer in a 1-3/4˝ thick wood door
Door Width
2´2˝ (660 mm) minimum
Maximum opening
n
n
8-3/4"
222 mm
3"
76 mm
Recommended at hold-open point or where a door cannot swing 140°
Optional track bumper assembly assists backcheck in cushioning the opening swing of the door. It is not intended to
replace an auxiliary stop
Top Rail
n
5/8"
16 mm
4-3/8"
110 mm
Butt Hinges
n
1-1/4" dia.
32 mm
Templating allows 140°, trim permitting. 100° with optional bumper installed
Adjustable hold-open points from 85° to 100°, with hold-open track
Notes:
• For interior doors
• Single acting cylinder and standard arm in top rail of door
• Concealed track in head frame
• Consult factory for installations with pivots.
18
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
3130
Series
Accessories
Cylinder
Arm
3131(2)(3)-3071
Cast Iron Cylinder Assembly
3130-3077T
Standard Arm
Handed
n
Handed
With mounting plate
n
Track roller not included with arm
n
Standard
n
n
n
Standard
Tracks
3130-3038B
Standard Track with Bumper
3130-3038
Track
Non-handed
n
Non hold-open
n
n
n
Will accept hold-open clip and/
or bumper assembly
n
n
3130-3038H
Hold-Open track
3130-3038HB
Hold-Open Track with Bumper
Non-handed
n
Non-handed
n
Non hold-open
n
Will accept bumper assembly
n
n
Optional
n
Will accept hold-open clip
n
Optional
Non-handed
Optional
Standard
Installation Accessories
3130-3054
Hold-Open Clip
3130-169
Track Bumper
n
n
n
ounts in track to assist
M
backcheck, does not replace
auxiliary stop
n
n
Limits maximum opening
C onsists of bumper, bumper
post, and mounting screw
n
3130-3034H
Hold-Open Track Roller
3130-3034
Track Roller
Mounts in track to provide holdopen function
old-open point controlled by
H
clip location
Quiet, low friction roller
assembly
n
Shoulder dimension “X” =
1/8˝ (3mm)
n
n
Quiet, low friction roller assembly
Shoulder dimension “X” =
1/8˝ (3mm)
n
equires 3130-3034H HoldR
Open Track Roller
19
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
3130
Series
Ordering Information
How-to-order 3130 Series closers
Closer will be shipped with:
- Standard cylinder with mounting bracket
- Standard arm wtih finish plate
- Standard track
- Wood and machine screw pack
Select cylinder size
3131
3132
3133
unless options listed below are selected.
Select hand
RH
LH
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass.
Closer options
Track
Standard with Bumper (BUMPER)
Hold-open (H)
Hold-open with Bumper (HBUMPER)
Screw pack
TORX Machine Screw (TORX)
Special template
ST- ________
Finishes
Custom Powder Coat (RAL)___________
Plated Finish, US ______________
SRI primer (use with powder coat finishes only)
Table of sizes
n
n
n
Select closer based on width of door.
3130 Series cylinders available in size 1, 2, or 3.
Closing power of 3130 Series closers is not adjustable
Interior door width
26˝
34˝
38˝
660mm
864mm
965mm
size 2
3132
3133
size 3
Minimum door width
Indicates recommended range of door width for closer size.
Reduced opening force 3130 Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for information on
systems that meet reduced opening force requirements
without affecting closing power.
* Maximum opening force.
20
DOOR WIDTH
36˝
42˝
8.5* lbs.
N/A
N/A
N/A
5.0* lbs.
3131
3131
3132
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
48˝
5010
Series
Features
The concealed 5010 Series is a heavy duty closer designed for institutional, high traffic, or
other applications exposed to weather or abuse. The double lever arm provides superior
door control and a choice of finishes, cylinder functions, and arm functions that meet
virtually all architectural requirements.
Grade 1 - ANSI A156.4, UL 10 C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
Cast Iron Body
Full Complement Bearing
1-1/8˝ Diameter Piston
11/16˝ Diameter Double Heat Treated
Pinion Journal
Regular Arm
Finishes/Colors/
Powder Coat
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
n
n
n
n
Fluid
All Weather Fluid
Handing
Handed
Size
Sized 1-6
Warranty
15 years
n
n
n
Optional SRI primer - powder coat only
Optional plated finishes
n
n
Special
Templates
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
E)
PE
N
R
LA
GU
AN
DA
RD
(S
IN
GL
E)
*ARM FUNCTION
RE
ST
LA
DE
D
CE
S
AC
ZE
ND
SI
HA
ARM
SI
BI
L
YE ITY
D
AC
TI
CO
ON
NC
EA
EX
L
PO ED
SE
D
CYLINDER
ED
FINISH
W
D
PL ER C
AT
O
ED AT
PO
4˝
DO TUB
OR E
IN
IN
IN
13/
FR
AM
E
CONCEALED
MOUNTING
-O
n
Arms
BL
n
Concealed (in frame); aluminum frame
requires 4˝ (102 mm) x 4˝ tube
OU
n
Mounting
LD
n
Wood Screws and Torx Security Screws
(optional)
(D
Body Construction
Fasteners
HO
Certifications
180° 100°
AVAILABLE
AVAILABLE
NOT AVAILABLE
NOT AVAILABLE
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening/hold-open point with standard template. See individual closer series for
degrees of opening per installation.
21
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
5010
Series
Mounting details
Concealed
Mounting
7/8"
22 mm
14"
356 mm
3-5/8"
92 mm
3/8"
10 mm
2-1/16"
52 mm
11-1/2"
292 mm
A
2-11/16"
68 mm
B
3/4"
19 mm
3/4"
19 mm
2" MAX
51 mm
Butt Hinges
Should not exceed 6˝ (152 mm) in width
Auxiliary Stop
Recommended at hold-open point or where a door cannot swing 180°
Top Rail
Minimum 2-1/8˝ (54 mm) required
Delay Action
n
n
n
Maximum opening
Add suffix “DEL” to selected cylinder (eg. 5014 DEL) (not available with 5016 cylinder)
Delays closing from maximum opening to approximately 70°
Delay time adjustable up to approximately 1 minute
Butt hung doors can be templated for
100°:
A = 10-3/16˝ (259 mm)
B = 12˝ (305 mm)
180°:
n
n
n
A = 5-1/2˝ (140 mm)
B = 7-5/16˝ (186 mm) trim permitting
Hold-open points up to 100° only with hold-open arm
Center pivot mounting restricts opening to 140°
Offset pivot mounting allows up to 180°, trim permitting
Notes:
• For interior or exterior doors
• Single acting cylinder in head frame
• Exposed arm on hinge side of door
22
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2-1/8"
54 mm
5010
Series
Accessories
Cylinder
Arms
5011(2)(3)(4)(5)(6)-3071
Cast Iron Cylinder Assembly
n
Handed
n
With mounting plate
n
Standard
5010-3049
Hold-Open Arm
5010-3077
Regular Arm
n
Non-handed
n
n
n
Handed
rovides hold-open function for
P
100° Template, adjustment at
elbow
Optional
23
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
5010
Series
2030
Series
Ordering information
How-to-order 5010 Series closers
Closer will be shipped with:
- Standard cylinder with finish plate
- Standard arm
- Regular arm
- Wood and machine screw pack
Select cylinder size
5011
5012
5013
5014
5015
5016 (DEL not available)
unless options listed below are selected.
Select hand
RH
LH
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass
Closer options
Screw pack
TORX Machine Screw (TORX)
Cylinder function
Delayed Action (DEL)
Arm
Hold-Open (H)
Finishes
Custom Powder Coat (RAL)_____________
Plated Finish, US ______________
SRI primer (use with powder coat finishes only)
Special template
ST- ________
Table of sizes
n
n
n
n
n
Select closer based on width of door
Series cylinders available in size 1, 2, 3, 4, 5, or 6
Closing power of all 5010 Series closers may be increased 50%
Specify next higher size closer where strong drafts exist
Delayed action not available with 5016 cylinder
Exterior (and Vestibule) door width
5013
5014
5015
5016
Interior door width
24˝
30˝
36˝
42˝
48˝
24˝
34˝
38˝
48˝
54˝
60˝
610mm
762mm
914mm
1067mm
1219mm
610mm
864mm
965mm
1219mm
1372mm
1524mm
size 3
size 4
size 5
size 6
size 2
5012
5013
5014
5015
5016
Minimum door width
size 3
size 4
size 5
size 6
Minimum door width
Indicates recommended range of door width for closer size.
Reduced opening force 5010 Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for information on
systems that meet reduced opening force requirements
without affecting closing power.
* Maximum opening force.
24
DOOR WIDTH
36˝
42˝
8.5* lbs.
5012
5013
5013
5.0* lbs.
5011
5011
5012
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
48˝
5030
Series
Features
The concealed 5030 Series PACER® is a heavy duty closer designed to fit in a narrow,
minimum 1-3/4˝ aluminum transom. The double lever arm provides superior door control
and the choice of finishes and arm functions meet virtually all architectural requirements.
Grade 1 - ANSI A156.4, UL 10 C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
Cast Iron Body
Full Complement Bearing
1-1/8˝ Diameter Piston
11/16˝ Diameter Double Heat Treated
Pinion Journal
Regular Arm
Finishes/Colors/
Powder Coat
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
n
n
n
n
Fluid
All Weather Fluid
Handing
Handed
Size
Sized 1; 3-6
Warranty
15 years
n
n
n
n
Special
Templates
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
LA
DA
GU
AN
RE
ST
E)
BL
PE
N
(S
IN
GL
E)
*ARM FUNCTION
RD
SI
B
LA
CE
S
AC
DE
ED
D
ZE
ND
ARM
IL
YE ITY
D
AC
TI
CO
ON
NC
EA
EX
L
PO ED
SE
D
CYLINDER
SI
HA
PO
IN
FINISH
W
D
PL ER C
AT
O
ED AT
˝
DO TUB
OR E
/4
13
IN
FR
A
M
E
CONCEALED
MOUNTING
IN
Optional SRI primer - powder coat only
Optional plated finishes
n
-O
n
Arms
LD
n
Concealed (in tube); aluminum frame
requires minimum 1-3/4˝ (44 mm) x
4-1/2˝ (114 mm) tube
OU
n
Mounting
(D
n
Wood Screws and Torx Security Screws
(optional)
R
Body Construction
Fasteners
HO
Certifications
180° 100°
AVAILABLE
AVAILABLE
NOT AVAILABLE
NOT AVAILABLE
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening/hold-open point with standard template. See individual closer series for
degrees of opening per installation.
25
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
5030
Series
Mounting details
Concealed
Mounting
A
1-5/8"
41 mm
3-23/32"
94 mm
21-7/8"
556 mm
11-1/4"
286 mm
B
2-11/16"
68 mm
3/4"
19 mm
2-1/8"
54 mm
19/32" dia.
15 mm
3/4" MIN.
19 mm
Butt Hinges
Should not exceed 6˝ (152 mm) in width
Auxiliary Stop
Recommended at hold-open point or where the door cannot swing 180°
Wood Frame
n
n
I nstallation simplified by WOOD MOUNTING CLIP SET 5030-416 for center pivoted or 5030-417 for offset pivoted
and butt hung installations
Consult factory for preparation details
Top Rail
Minimum 2-1/8˝ (54 mm) required
Door Thickness
Maximum 1-3/4˝ (44 mm), for doors thicker than 1-3/4˝ consult factory
Maximum opening
Butt hung doors can be templated for
100°:
A = 5-13/16˝ (148 mm)
B = 11-13/16˝ (300 mm)
180°:
n
n
n
A = 2-1/16˝ (52 mm)
B = 8-1/16˝ (205 mm)
trim permitting
Hold-open points up to 100° only with hold-open arm
Center pivot mounting restricts opening to 120°. Hold-open up to 120° with hold-open arm
Offset pivot mounting allows up to 115°, trim permitting. Hold-open up to 115° with hold-open arm
Notes:
• For interior or exterior doors
• Single acting cylinder in head frame
• Exposed arm on push side of door
26
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
5030
Series
Accessories
Cylinder
Arms
5031(3)(4)(5)(6)-3071
Cast Iron Cylinder Assembly
5030-3049
Hold-Open Arm
5030-3077
Regular Arm
Handed
n
n
Non-handed
Handed
n
With mounting plate
n
n
n
Standard
n
rovides hold-open function for
P
100° template, adjustable at
elbow
Optional
Installation Accessories
5030-417
Wood Mounting Clip Set
5030-416
Wood Mounting Clip Set
Simplifies mounting center
pivoted 5030 closer in wood
frame
n
Includes latch stile clip, hinge
stile clip, and cover.
n
n
F or use with Ives Series center
pivots
Simplifies mounting offset
pivoted or butt hung 5030
closer in wood frame.
n
n
Includes two clips.
n
For use with offset pivots.
Consult factory for special
template.
n
Consult factory for special
template
n
27
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
5030
Series
2030
Series
Ordering information
How-to-order 5030 Series closers
Closer will be shipped with:
- Standard cylinder with mounting plate
- Regular arm
- Wood and machine screw pack
Select cylinder size
5031
5033
5034
5035
5036
unless options listed below are selected.
Select hand
RH
LH
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass
Closer options
Installation accessories
Wood Clip Set, 5030-416
Wood Clip Set, 5030-417
Arm
Hold-Open (H)
Finishes
Custom Powder Coat (RAL)_____________
Plated Finish, US ______________
SRI primer (use with powder coat finishes only)
Screw pack
TORX Machine Screw (TORX)
Special template
ST- ________
Table of sizes
n
n
n
n
Select closer based on width of door
5030 Series cylinders available in size 1, 2, 3, 4, 5 or 6
Closing power of all 5030 Series closers may be increased 50%
Specify next higher size closer where strong drafts exist
Exterior (and Vestibule) door width
5033
5034
5035
5036
Interior door width
28˝
30˝
36˝
42˝
48˝
28˝
34˝
38˝
48˝
54˝
60˝
711mm
762mm
914mm
1067mm
1219mm
711mm
864mm
965mm
1219mm
1372mm
1524mm
size 3
size 4
size 5
size 6
size 3
5033
5034
5035
5036
Minimum door width
size 4
size 5
size 6
Minimum door width
Indicates recommended range of door width for closer size.
Note: Minimum door width 28˝ (711 mm).
Reduced opening force 5030 Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for information on
systems that meet reduced opening force requirements
without affecting closing power.
* Maximum opening force.
28
DOOR WIDTH
36˝
42˝
8.5* lbs.
5033
5033
5033
5.0* lbs.
5031
5031
5033
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
48˝
6030
Series
Features
The concealed 6030 Series PACER® is a heavy duty, double acting closer designed to fit
in a narrow, minimum 1-3/4˝ header. The single lever arm and roller assembly provides
smooth, quiet door control and the choice of finishes and track functions meet virtually
all architectural requirements. Installation at left illustrated with center pivot set (not
included).
Certifications
Grade 1 - ANSI A156.4, UL 10 C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
Body Construction
Cast Iron Body
Full Complement Bearing
1-1/8˝ Diameter Piston
11/16˝ Diameter Double Heat Treated
Pinion Journal
n
n
n
n
Fasteners
Wood Screws and Torx Security Screws
(optional)
Mounting
Concealed (in tube); double acting
Arms
Standard arm with track
Finishes/Colors/
Powder Coat
n
n
n
n
n
Fluid
All Weather Fluid
Handing
Non-Handed
n
Size
Sized 1-5
n
Warranty
n
Optional SRI primer - powder coat only
Optional plated finishes
n
15 years
Special
Templates
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
N
ST
95°
AVAILABLE
NOT AVAILABLE
AVAILABLE
NOT AVAILABLE
95°
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening/hold-open point with standard template. See individual closer series for
degrees of opening per installation.
29
LCN Door Control Catalog
phone: 877-671-7011
*ARM FUNCTION
AN
D
RE ARD
GU
(
LA SIN
HO R (D GLE
LD OU )
B
-O
PE LE)
ARM
HA
PO
W
CYLINDER
ND
SI ED
ZE
D
AC
CE
S
DE SIB
LA ILI
YE TY
D
AC
TI
CO
ON
NC
EA
EX
L
PO ED
SE
D
FINISH
D
PL ER C
AT
O
ED AT
DO TUB
OR E
IN
IN
13/
4˝
FR
AM
E
CONCEALED
MOUNTING
IN
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
6030
Series
Mounting details
Concealed
Mounting
4-1/2"
115 mm
1-5/8"
41 mm
18-1/4"
464 mm
1-5/8"
41 mm
1"
25 mm
1/2"
13 mm
of Door
5-1/4"
133 mm
1-7/16"
37 mm
22-1/2"
572 mm
3-23/32"
95 mm
23-5/8"
600 mm
of Pivot
1-1/4"
32 mm
Auxiliary Stop
Recommended where a door cannot swing 95°
Center Pivot Set
Must be used but ordered separately
Door Width
30˝ (762 mm) minimum with 1-3/4˝ (44 mm) pivot centers
Top Rail
n
n
1-7/16˝ (36 mm) mortise required
3/8˝ (10 mm) cutout required at top of the door, both sides.
Door Thickness
1-3/4˝ (44 mm) minimum
Centering Adjustment
Centering is provided by rotating the track roller to center the door in the opening.
Wood Frame
n
n
Maximum opening
n
n
Installation simplified by WOOD MOUNTING CLIP SET, 6030-416
Consult product support for special template
Center pivot template allows 95°
Adjustable hold-open points from 85° to 95°, with hold-open track
Notes:
• For interior or exterior doors
• Double acting cylinder in cased frame
• Concealed arm and track in door top rail
• Center pivots only
30
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
6030
Series
Accessories
Cylinder
Arm
6031(2)(3)(4)(5)-3071
Cast Iron Cylinder Assembly
6030-3038B
Standard Track with Bumper
6030-3077T
Standard Arm
Non-handed
n
With mounting plate
n
Non-handed
n
n
n
Tracks
Standard
n
Non-handed
n
Non hold-open
n
n
5/16˝ (8 mm) thick arm
n
rack roller not included
T
with arm
6030-3038HB
Hold-Open Track with Bumper
n
Will accept hold-open clip
n
Standard
Non-handed
Optional
Installation Accessories
Simplifies mounting closer in
wood frame
n
Includes latch stile clip, hinge
stile clip, and cover
n
n
F or use with Ives Series center
pivots
Consult factory for special
template
n
6030-3054
Hold-Open Clip
6030-169
Track Bumper
6030-416
Wood Mounting Clip Set
n
n
n
ounts in track to assist
M
backcheck
n
Limits maximum opening
n
C onsists of bumper, bumper
post, and mounting screw
n
NOTE: Track bumper does not
replace auxiliary stop.
Mounts in track to provide holdopen function
old-open point controlled by
H
clip location
6030-3034
Track Roller
Quiet, low friction roller
assembly includes eccentric
with 3/4˝ (19 mm) adjustment
to center 36˝ (914 mm) door
n
Requires 6030-3034H HoldOpen Track Roller
6030-3034H
Hold-Open Track Roller
Hold-open roller
n
Quiet, low friction roller
assembly
n
31
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
6030
Series
2030
Series
Ordering information
How-to-order 6030 Series closers
Closer will be shipped with:
- Standard cylinder with mounting plate
- Standard arm
- Standard track with bumper
- Wood and machine screw pack
Select cylinder size
6031
6032
6033
6034
6035
unless options listed below are selected.
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass
Closer options
Track
Hold-open with Bumper (HBUMPER)
Finishes
Custom Powder Coat (RAL)_____________
Plated Finish, US ______________
SRI primer (use with powder coat finishes only)
Installation accessories
Wood Clip Set, 6030-416
Screw pack
TORX Machine Screw (TORX)
Special template
ST- ________
Table of sizes
n
n
n
n
Select closer based on width of door
6030 Series cylinders available in size 1, 2, 3, 4, or 5
Closing power of all 6030 Series closers may be increased 35%
Specify next higher size closer where strong drafts exist
Exterior (and Vestibule) door width
Interior door width
30˝
34˝
36˝
42˝
30˝
34˝
38˝
48˝
54˝
762mm
864mm
914mm
1067mm
762mm
864mm
965mm
1219mm
1372mm
6033
6034
6035
size 3
size 4
size 5
6032
6033
6034
6035
Minimum door width
size 2
size 3
size 4
size 5
Minimum door width
Indicates recommended range of door width for closer size.
Note: Minimum door width 28˝ (711 mm).
Reduced opening force 6030 Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for information on
systems that meet reduced opening force requirements
without affecting closing power.
* Maximum opening force.
32
DOOR WIDTH
36˝
42˝
48˝
8.5* lbs.
6033
6034
6035
5.0* lbs.
6031
6032
6032
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Fire/
Life Safety
Closers/
Holders Series
Product selection guide
SENTRONIC® Series LCN closer/holders combine heavy duty closers with electrically controlled holdopen functions to control fire and smoke barrier doors. This guide is based on the desired mounting of
the unit.
INTERIOR
DOOR
PUSH SIDE
MOUNTED
SINGLE POINT
MULTI-POINT
4040SE
SEH**
CONCEALED
MOUNTING
PULL SIDE
MOUNTED
SINGLE POINT
4410ME
4040SE
SEH**
MULTI-POINT
SEM7830
SEM7840
SEM7850
MULTI POINT
3130SE
2310ME
4310ME
HIGH VOLUME TRAFFIC DOORS
INTERIOR/EXTERIOR
7800***
MAGNETS
WALL
SINGLE POINT
FLOOR
PULL SIDE
PUSH SIDE
SEM7820
4310 HSA
4410 HSA
** See SEH section (cylinder not included).
*** SEM 7800 Series are die cast.
Product comparison
This chart shows a basic comparison of Sentronic closer/holders. Refer to the specific product chapter for complete details..
S
RE
S
EG
EE
E
BL
OU
/1
4
0
ST
AN
D
RE ARD
GU
(
LA SIN
SW R (D GLE)
IN OUB
G
L
FR E)
D
SIN
GL
E
HA
ST
IC
ET
AL
M
PL
A
DE
R
AT CO
ED AT
W
PO
PL
LE
CE
A
HI
NG
E
TO (PU
L
P
JA L) S
ST MB IDE
OP
(
F PU
CO ACE SH
NC
(P )
EA
US
LE
H)
CO
D
N
(
CLOSER
SERIES
3130SE
*ARM FUNCTION
CYLINDER
PO
IN
M
TH
UL
TIOL
PO
DBY INT OPEN
PA HOL
SS D-O
80 PEN
COVER
FR
AM
E)
D
(D
OO
R)
FINISH
ND
NO ED
NS
SI IZE
D
ZE
D
MOUNTING
4040SE
2310ME
4310ME
4410ME
4310HSA
4410HSA
AVAILABLE
NOT AVAILABLE
* Maximum hold-open with standard template. See individual closer series for degrees of opening and hold-open per installation.
1
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Fire/
Life Safety
Closers/
Holders Series
SENTRONIC® CLOSER/HOLDERS
LISTINGS AND APPROVALS
SINGLE POINT HOLD-OPEN (SE)
Consult the factory for other listings, such as; cUL, Department of Labor
and Industry of the Commonwealth of Pennsylvania, The Board of
Standards and Appeals of the City of New York, Fire and Panic Safety
Standards of the California State Fire Marshal.
Automatic detection and containment of fire and smoke are the best ways
to minimize danger to life and property. Patented Sentronic door closer/
holders are designed to hold swinging doors open in normal use and release
and automatically close the doors under fire conditions. Conforms to major
building codes, life safety codes (eg. NFPA 101) and ANSI A156.15.
SE Series offers adjustable single point hold-open function controlled by
solenoid assembly located in the SE track.
Sentronic closer/holders are listed by Underwriters Laboratories, Inc. in
the following product categories under FIRE DOORS (GSNV), Combination
Door Closers and Holders (GTIS) file R7050. SEM 7800 Series magnets are
listed under Door Holders (GTPR) file R8327.
HOLDING SOLENOIDS CURRENT DRAW
MULTI-POINT HOLD-OPEN (ME)
SE/ME
24V AC/DC (+10% -15%) @ 90 mA max.
120V AC/DC (+10% -15%) @ 30 mA max.
ME Series offers infinitely adjustable, multi-point hold-open function
controlled by solenoid on the cylinder assembly.
Electronically controlled closer/ holder designed to provide easy passage for
groups of pedestrians through high traffic doors. Best suited for high traffic
emergency exit doors.
SEM (TRI-VOLT)
12V DC (+10% -15%) @ 30 mA max.
24V AC/DC (+10% -15%) @ 20 mA max.
120V AC (+10% -15%) @ 20 mA max.
MAGNETS (SEM) - ELECTROMAGNETIC DOOR HOLDERS
HSA
24V AC/DC (+10% -15%) @ 120 mA max.
HOLDER SCANNER ACTIVATED (HSA)
SEM Series magnets work with manual door closers to provide single point
hold-open. Now available in new tri-voltage with 35 lbs. of holding force.
TRANSFORMER DATA
APPLICATIONS
n
n
n
n
n
For fire and smoke barrier doors.
Integrated into larger system.
Surface and concealed mountings.
R
emote control hold-open function of executive and conference area
doors.
A
dapter plates and other installation accessories available for unusual
conditions.
120V AC 50-60 Hz (primary); 24V AC @ 400 mA max. (secondary)
An LCN supplied transformer will power (recommended) 2 SE, 3
SE/ME, and 15 SEM.
ME WIRING
ME “ON/OFF” switch assembly includes trim pot to adjust pull out
force and fuse to protect solenoid.
Input Wires
(18 Gauge Black)
GENERAL NOTES
Note 1: For installations where 120V AC input voltage is supplied, 120V/24V
transformer, 4040SE-3210, is required to reduce line voltage for 24V
holding solenoid. Units are available in either 24V or 120V input, please
specify.
Wire Harness Connector
Earth Ground
(Green)
Note 2: Transformer 4040SE-3210 mounted on cover plate to fit 4˝ (102 mm)
x 4˝ x 2-1/8˝ (54 mm) junction box (by others).
On/Off Switch
Rectifier
Capacitor
(24V Only)
Solenoid
Power Plug
Solenoid Holding Force
Adjustment Potentiometer (24V Only)
Note 3: SE track quick-connector is required for 1/2˝ conduit.
Note 4: SE test switch assembly includes fuse to protect solenoid. Works with
ionization, photoelectric and heat sensing detectors (by others).
ME (4310, 4410) WIRING DIAGRAM (24V only)
WIRING DIAGRAM
To either terminal
Input voltage 24V AC/DC
or 120V AC/DC
(usually from alarm
panel or detector)
INPUT WIRES
To either terminal
Green ground
Terminal
Chassis Ground
SE WIRING DIAGRAM
ME (2310) WIRING DIAGRAM
2
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Fire/
Life Safety
Closers/
Holders Series
HSA WIRING
FINISHES
n A
vailable in six standard or a wide selection of optional custom
HSA “On/Off” switch assembly includes trim pot to adjust hold-open time
and fuse to protect solenoid.
powder coat finishes to blend with door and frame.
n L
CN’s powder coat finishes surpass 100 hours of salt spray which is
Connect Green Wire
to Earth Ground
over four times the ANSI standard for corrosion resistance.
n P
lated finishes are available as an option to accent door and frame.
MAINTENANCE
Closers mounted according to LCN installation instructions require no
periodic adjustments. Quarterly inspections are recommended. Refer to the
installation instructions for complete, product specific details.
Connect Black Wires
to Input Voltage Leads
(polarity not important)
POSITIVE PRESSURE
LCN closers have been certified for three hours by UL to be in compliance
with UL 10 C. Contact LCN for specific details on door closer fire ratings.
HSA WIRING DIAGRAM
FASTENERS
FEATURES COMMON TO FIRE/LIFE SAFETY CLOSERS
n
n
n
n
n
n
n
n
n
24V AC/DC or 120V AC input, please specify for SE or ME.
When current is interrupted, hold-open releases and door closes.
Adjustable hydraulic backcheck cushions opening swing prior to 90°.
Separate regulation of general closing speed and latching speed.
A
vailable in a wide range of powder coated finishes to blend with door
and frame. SEM magnets available in Aluminum and Dark Bronze only.
Circuit automatically handles AC or DC input.
Can be pushed safely and easily out of hold-open.
F unctions as a full rack and pinion door closer when hold-open is not
engaged or current is interrupted.
W
orks with ionization, photoelectric and heat sensing detectors (by
others).
Standard WOOD and MACHINE SCREW (WMS) pack contains phillips head
wood and machine screws to install the closer. Thru Bolts and/or TORX®
machine screws are available for most closers. LCN thru bolts (TB) can be
installed on 1-3/4˝ thick doors with either the 1/4-20 machine screws or
optional TORX screws supplied with the closer. Optional sizes are available
for 1-5/8˝ or 1-3/8˝ door thicknesses, but this must be specified when
ordering.
X
WARRANTY
Drill 25/64" for
steel doors or
Drill 3/8" for
wood doors
2 year limited warranty. See General Information Section for complete
warranty details..
SPECIFICATIONS
Refer to “SPECIFICATIONS” section for suggested architectural specifications.
DESIGN ASSISTANCE
LCN has been providing reliable solutions to unique door control problems
since 1925.
NOTE 1: For Thru Bolts, specify door thickness if other than 1-3/4˝ (44 mm).
NOTE 2: Phillips head, metric machine screws are available on special order.
Contact LCN for assistance or technical information at 877-671-7011 or
FAX 800-248-1460 (order entry), Fax 815-879-1495 for Application
Engineering.
MATERIALS
n
n
n
n
n
n
n
High strength cast iron cylinder.
Forged steel main arm.
One piece forged steel piston.
All weather fluid eliminates seasonal adjustments.
High efficiency, full complement, low friction bearings.
Tamper resistant regulating screws.
Quiet, low friction track and roller combination for all single lever arm
closers.
3
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
4
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
SEM7800
Series
Magnets
The Sentronic® SEM 7800 Series are heavy duty, electrically controlled door holding
magnets. Magnets are fail safe and hold until the current is interrupted. A manual door
closer is used to control and close the door. A choice of floor, recessed wall, or surface
mounted wall magnets are available.
Certifications
Grade 1 - ANSI A156.15, UL 10C for metal smoke barrier or labeled door, ADA, Life Safety Code, NFPA 101, 100 Hour Salt
Spray, Meets BAA - Buy American Act
Voltage
Tri-voltage design with 35 lbs. of holding force
Housing
Die cast
Fasteners
Wood and machine screw pack
Finishes/Colors/
Powder Coat
Available in Aluminum and Dark Bronze only
Options
Now available with armature extensions (see page 11)
5
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
SEM7800
Series
7820
1-7/8"
48 mm
2-3/8"
60 mm
4-9/16"
116 mm
1-5/8"
41 mm
1-11/16"
43 mm
Magnets
Features and
mounting details
5-1/8"
130 mm
3-7/16"
87 mm
2-1/8"
54 mm
Mounting
Floor mounted
Total Projection
6-3/4˝ (171 mm)
7830
1-7/8"
48 mm
2-1/2"
64 mm
2-13/16"
70 mm
2-3/8"
60 mm
4-5/8"
117 mm
1-11/16"
43 mm
1-5/8"
41 mm
Mounting
Surface wall mounted
Total Projection
4-1/8˝ (105 mm)
n
Suitable for use in pocket door installations
7840
1-7/8"
48 mm
1"
25 mm
2-3/8"
60 mm
1-11/16"
43 mm
2-13/16"
70 mm
4-5/8"
117 mm
1-5/8"
41 mm
Mounting
Low profile recessed wall mount
2˝ (51 mm) x 4˝ (102 mm) x 1-1/2˝ (38 mm)
n
n
Total Projection
n
2-5/8˝ (67 mm)
Suitable for use in pocket door installations
Note:
Outlet box not included.
7850
2-3/8"
60 mm
1-7/8"
48 mm
1"
25 mm
2-13/16"
70 mm
4-5/8"
117 mm
1-11/16"
43 mm
2-5/8"
67 mm
Mounting
Standard profile recessed wall mount
2˝ (51 mm) x 4˝ (102 mm) x 1-1/2˝ (38 mm)
n
n
Total Projection
n
3-5/8˝ (92 mm)
Suitable for use in pocket door installations
Note:
Outlet box not included.
6
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
SEM
Series
Electrical data
Electrical schematic
Operation:
Electromagnets are typically used
with fire alarm systems. Doors
are held open in the non-alarm
condition. When the fire alarm panel
enters the alarm condition, power to
the electromagnets is removed, the
doors close under door closer control,
Operation:
and function
as a manual
Electromagnets
are typically
used door.
with fire alarm
Doorspanel
are returns to
Whensystems.
the fire alarm
held open in the non-alarm
non-alarm
power is
condition.the
When
the fire condition,
alarm
reapplied
to the
electromagnets and
panel enters
the alarm
condition,
power to the
the doors
electromagnets
can be heldisopen again.
12V
120V
24V
COM
Voltage input
COM
24V
120V
12V
Fire Alarm
Panel
Fig. 1 24V AC/DC Wiring
Polarity is inimportant
Fire Alarm
Panel
N
H
EGnd
COM
24V
120V
12V
Electrical Specifications
Max. Current Draw
.030A @ 12VDC
.020A @ 24VAC/DC
.020A @ 120VAC
Fig. 2 120V AC Wiring
removed, the doors close under
door closer control, and function as
a manual door. When the fire alarm
panel returns to the non-alarm
condition, power is reapplied to the
electromagnets and the doors can
be held open again.
Fire Alarm
Panel
Earth Ground
+
COM
24V
120V
12V
Fig. 3 12V DC Wiring
Polarity as shown
Holding Force
35 lbs. @ nominal input voltage
Maximum Current Draw
n
n
.020A @ 24VAC/DC, 120VAC
.030A @ 12VDC
7
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
SEM
Series
Accessories
Magnets
SEM7820-516
Floor Magnet
n
Magnet coil
n
Standard
Armatures
SEM7830-516
SEM7840-516
SEM7850-516
Wall Magnet
n
Magnet coil
n
Die cast low profile armature
n
Standard
n
Standard
Cover
Die cast cover
n
Standard
n
Die cast armature
n
Standard
Box
SEM7830-72
SEM7840-72
SEM7850-72
Standard Cover
n
SEM7850-828
Door Armature
SEM7820-825
SEM7830-825
SEM7840-825
Door Armature
SEM7830-268
Wall Box
8
n
Die cast surface wall mount box
n
Standard
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
SEM
Series
Accessories
Extensions
SEM7810-514
Coupler Assembly Kit
Required for each door needing
extension(s)
n
Extension, SEM7810-E100
Extension - 1˝
SEM7810-E075
Extension - 3/4˝
SEM7810-E050
Extension - 1/2˝
n
Metal
n
Metal
n
Metal
n
Standard
n
Standard
n
Standard
Kit includes coupler link and ball
pivot (alone serves as a 1-1/2˝
extension)
n
SEM7810-E200
Extension - 2˝
Extension, SEM7810-E400
Extension - 4˝
n
Metal
n
Metal
n
Standard
n
Standard
SEM7810-517
Extension kit
Extension kit includes:
n 10...........7810SEM-E050
n 10............7810SEM-E075
n 10............7810SEM-E100
n 5.............7810SEM-E200
n 20..............7810SEM-514
Note: Using just the Coupler Assembly Kit (SEM7810-514) will create a 1-1/2˝ link.
Extension Links are available in different lengths and can be combined together to achieve the desired length. Max. recommended length = 12˝
9
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
SEM
Series
Ordering Information
How-to-order sem 7800 series magnets
Magnets will be shipped with:
- Die cast housing
- Cover
- Armatures
- WMS screw pack
Select magnet series
SEM7820
SEM7830
SEM7840
SEM7850
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze
How-to-order sem 7810 extensions
Select magnet series
SEM7810-514 (qty.) ________________
SEM7810-E050 (qty.) ________________
SEM7810-E075 (qty.) ________________
SEM7810-E100 (qty.) ________________
SEM7810-E200 (qty.) ________________
SEM7810-E400 (qty.) ________________
SEM7810-517 (qty.) ________________
10
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
3130SE
Series
Features
The 3130SE SENTRONIC® is a concealed in the door, closer/ holder designed to provide
single point hold-open for fire and smoke barrier doors. Door is held open until current
interruption releases the holding mechanism and the door closes. Single lever (track) arm
closer is specifically designed for interior doors.
Cast Iron Body
n Full Complement Bearing
n 1-1/8˝ Diameter Piston
n 9/16˝ Diameter Double Heat Treated
Pinion Journal
n
Fasteners
Wood and machine screw pack
Mounting
Concealed (in door) for interior smoke
barrier and labeled doors
Arms
Standard, handed arm and non-handed
track
Finishes/Colors/
Powder Coat
n
n
n
n
Fluid
All Weather Fluid
Handing
Handed
Size
Size 3 or 4, non-adjustable
n
Warranty
2 years
n
n
n
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
Optional SRI primer - powder coat only
Optional plated finishes
n
Special
Templates
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
S
RE
S
EG
EE
LE
4
/1
SIN
GL
E
ND
NO ED
NS
SI IZE
D
ZE
D
HA
C
AL
ST
I
ET
M
PL
A
* Maximum opening/hold-open point with standard template. See individual closer series for
degrees of opening per installation.
AVAILABLE
NOT AVAILABLE
11
LCN Door Control Catalog
phone: 877-671-7011
*ARM FUNCTION
CYLINDER
T
COVER
CO
A
DE
AT
W
PL
PO
ED
R
ED
CE
AL
HI
NG
E
TO (PU
L
P
JA L) S
ST MB IDE
OP
(
F PU
CO ACE SH
NC
(P )
EA
US
L
CO
H)
ED
N
(
FR
AM
E)
(D
OO
R)
FINISH
PO
IN
M
TH
UL
TIOL
PO
DBY INT OPEN
H
PA
OL
SS D-O
80 PEN
MOUNTING
UB
Body Construction
Grade 1 - ANSI A156.15, UL/for metal smoke
barrier or labeled door, ADA, Life Safety Code,
NFPA 101, 100 Hour Salt Spray, Meets BAA Buy American Act
0
ST
AN
D
RE ARD
GU
(
LA SING
SW R (D LE)
IN OUB
G
L
DO FR E)
Certifications
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
3130SE
Series
Mounting details
Concealed
Mounting
3-7/8"
98 mm
1-1/16"
27 mm
22-3/4"
578 mm
11-3/4"
298 mm
3/8"
10 mm
4-7/8"
124 mm
1-3/8"
35 mm
1-1/2"
38 mm
1-1/4"
32 mm
1-1/4" Dia.
32 mm
8-3/4"
222 mm
5/8"
3"
16 mm 76 mm
3-1/4"
83 mm
3-5/16"
84 mm
Butt Hinges
n
n
Should not exceed 5˝ (127 mm) in width
Consult factory for pivot hung installations
Auxiliary Stop
Recommended at hold-open point
Top Rail
Minimum 4˝ (102 mm)
Door Thickness
n
1-3/4˝ (44 mm) minimum
Please consult the door manufacturer to assure that the door integrity and warranty is maintained after installing
the 3130SE Series door closer in 1-3/4˝ (44 mm) thickness wood doors
n
Door Width
n
n
Maximum Opening
n
n
n
SE, SEL Electrical Options
n
n
n
n
Options
n
n
SE Wiring Diagram
2´4˝ (711 mm) minimum for single door with SE
2´8˝ (813 mm) minimum for door with SEL
Templating allows 110°
Hold-open points between 85° and 110° in approximately 3° increments
SEL arm and track locate hold-open at 110°, 120° and 130°
These track assemblies require a single power circuit for the holding solenoid
SE or SEL holding solenoid is either 24V or 120V input, please specify
An optional 4040SE-3210 or 8310-824 TRANSFORMER reduces 120V AC line voltage to 24V AC
Circuitry accepts either AC or DC input
Long (SEL) track and arm
24V or 120V input, please specify
To either terminal
INPUT WIRES
To either terminal
Green ground
Terminal
n
For interior smoke barrier and labeled fire doors
n
Functions as full rack and pinion door closer when hold-open is not engaged or current is interrupted
n
Interfaces with fire alarm system
12
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
3130SE
Series
Accessories
Cylinder
Arms
3130SE-3071
SE Cylinder Assembly
Handed
n
n
3130SEL-3077T
Long Arm
3130SE-3077T
Standard Arm
n
Cast iron
Handed
Handed
n
Adjustable to select hold-open
point
n
For various applications see
“Table of Sizes” on 3130SE
Series page 16
n
n
Provides hold-open point from
110° to 130°, determined by
track templating
n
Standard
Used with SEL TRACK 3130SEL3038 only
n
Standard
n
n
Tracks
Installation Accessories
3130SE-3038
SE Track
n
3130SEL-3038
SEL Long Track
Non-handed
n
Circuitry accepts either AC or DC
WIRING DIAGRAM
n
INPUT VOLTAGE
24V AC/DC
OR 120V AC/DC
(USUALLY FROMn
ALARM PANEL
OR DETECTOR)
input
24V holding solenoid (24) or
120V holding solenoid (120),
please specify
n
Standard
Optional
3130SE-81
Conduit Quick-Connector
Non-handed
Two piece connector for use
with 1/2˝ conduit
n
Used with LONG ARM, 3130SEL3077T, only
n
n
See page 21 for illustration
Provides hold open point from
110° to 130°, determined by
templating. Circuitry accepts
either AC or DC input
3130SE-3034SE
Track Roller & Track Slider
Quiet, low friction roller assembly
n
Shoulder dimension “X” = 1/8˝
(3 mm)
n
Alloy metal slider for use in SE
series tracks only
n
n
24V holding solenoid (24) or 120V
holding solenoid (120), please
specify
n
n
Optional
4040SE-3210
Transformer
Switch
Reduces line voltage from 120V
to 24V AC
n
Mounted on plate for 4˝
(102 mm) x 4˝ x 2-1/8˝
(54 mm) junction box (by
others)
n
3130SE-3436
Test Switch
13
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
3130SE
Series
Ordering Information
How-to-order 3130SE Series closers
Closer will be shipped with:
- Standard arm
- Track roller and slider
- Standard track
- Wood & machine screw pack
Select cylinder size
3133SE
3134SE
Select hand
RH
LH
unless options listed below are selected.
Voltage
24V AC/DC
120V AC/DC
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass
Closer options
Installation accessories
Transformer, 4040SE-3210
Arm
Long Arm* (LONG)
* use with SEL track only
Screw pack
TORX Machine Screw (TORX)
Finishes
Custom Powder Coat (RAL) ___________
Plated Finish, US ___________
Special template
ST- ________
Table of sizes
n
n
n
Select closer based on width of door
Sized 3130SE series cylinders available in size 3 or 4
Closing power of all 3130SE Series closers is not adjustable
Interior door width
28˝
34˝
38˝
48˝
711mm
864mm
965mm
1219mm
size 3
3133SE
3134SE
size 4
Minimum door width
Indicates recommended range of door width for closer size.
14
NOTE: For SE, minimum door width 28˝ (711mm)
For SEL, minimum door width 32˝ (813mm)
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4040SE
Series
Features
The 4040SE SENTRONIC® is a heavy duty, non-handed, nonsized closer/holder designed
to provide single point hold-open for fire and smoke barrier doors. The door is held open
until current interruption releases the holding mechanism and the door closes. Single
lever (track) arm closer is specifically designed for interior doors. Choice of finishes, track
functions, and installation accessories meet virtually all life safety requirements.
n
n
Cast Iron Body
n Full Complement Bearing
n 1-1/2˝ Diameter Piston
n 3/4˝ Diameter Double Heat Treated
Pinion Journal
n
Fasteners
Wood and machine screw pack
Mounting
Hinge (Pull Side), Stop Face (Push Side)
Arms
Standard arm and SE track, standard
Double egress arm and SEL track, optional
Finishes/Colors/
Powder Coat
n
n
n
n
n
n
Fluid
All Weather Fluid
n
Handing
Non-Handed
n
Size
Adjustable Spring Size, up to 4
Warranty
2 years
Special
Templates
n
Wiring
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
Optional SRI primer - powder coat only
Optional plated finishes
Concealed or surface, interfaces with fire
alarm systems
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
HA
S
RE
S
EG
E
/1
110
95
* Maximum opening/hold-open point with standard template. See individual closer series for
degrees of opening per installation.
AVAILABLE
NOT AVAILABLE
15
LCN Door Control Catalog
phone: 877-671-7011
EE
4
0
ST
AN
D
RE ARD
GU
(
LA SIN
G
SW R (D LE)
IN OUB
L
G
FR E)
D
ND
NO ED
NS
SI IZE
D
ZE
D
C
AL
ST
I
ET
M
PL
A
W
D
PL ER C
AT
O
ED AT
PO
ED
AL
CE
*ARM FUNCTION
CYLINDER
PO
IN
M
TH
UL
TIOL
PO
DBY INT OPEN
H
PA
OL
SS D-O
80 PEN
COVER
FR
AM
E)
(D
OO
R)
FINISH
SIN
GL
E
MOUNTING
HI
NG
E
TO (PU
L
P
JA L) S
ID
M
ST
OP B ( E
P
U
F
CO ACE SH
NC
(P )
EA
US
LE
CO
H)
D
N
(
Clip-on plastic, standard
Metal, optional
BL
Body Construction
Cover
Grade 1 - ANSI A156.15, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act,
NFPA 101
OU
Certifications
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4040SE
Series
Mounting details
Mounting details
Hinge (Pull)
Side Mounting
1-1/2"
38 mm
3-1/2"
89 mm
22-3/4"
578 mm
3-1/2"
89 mm
5/16"
8 mm
2-1/4"
57 mm
1-1/4"
32 mm
12-1/4"
311 mm
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Swing Clear Hinges
Consult factory
Auxiliary Stop
Recommended at hold-open point
Reveal
n
n
Top Rail
n
n
Should not exceed 1/8˝ (3 mm) for standard arm
Should not exceed 2-11/16˝ (68 mm) for double egress arm
Minimum 3-1/2˝ (89 mm)
Installation with PLATE, 4040SE-18 requires SPECIAL TEMPLATE and 1-3/4˝ (44 mm) minimum top rail
Head Frame
Requires 2˝ (51 mm) minimum
Flush Ceiling
2˝ (51 mm) head frame does not require special templating
Door Width
n
n
2´4˝ (711 mm) minimum for single door with SE
4´8˝ (1422 mm) minimum for paired doors with SE
Flush Ceiling
2-3/8˝ (60 mm) behind door required for 90° installation
Maximum Opening
n
n
n
n
n
n
SE, SEL Electrical Options
Templating allows 110°
Hold-open points between 85° and 110° in approximately 3° increments
Pull side mounting on a double egress frame requires a handed double egress arm
Maximum hold-open to 95°
2-11/16˝ (67 mm) maximum reveal on pull side
SEL track provides hold-open points between 90° and 120°‚ in approximately 3° increments
These track assemblies require a single power circuit for the holding solenoid
SE or SEL holding solenoid is either 24V or 120V input, please specify
n An optional 4040SE-3210 or 8310-824 TRANSFORMER reduces 120V AC line voltage to 24V AC.
n Circuitry accepts either AC or DC input
n
n
Options
n
n
SE Wiring Diagram
Long (SEL) track
Handed double egress arm for reveal under 2-11/16˝ (67 mm)
See “FIRE/LIFE SAFETY” section page 19 for typical wiring and electrical diagram
Notes:
• Information applies to 4040 SE unless otherwise specified
• Hold-open force is adjustable
• Momentary on/off switch board assembly for testing door release also provides over-voltage protection. Field replaceable
• Functions as a full rack and pinion closer when hold-open is not engaged or current is interrupted
16
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1-1/16"
27 mm
4040SE
Series
Mounting details
Stop Face (Push Side)
Mounting
22-3/4"
578 mm
3-7/8"
98 mm
5-3/16"
3-1/2" 132 mm
89 mm
2-1/4"
57 mm
1-1/4"
32 mm
3-3/4"
95 mm
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended at hold-open point
Top Rail
n
n
Stop Width
1-1/4˝ (32 mm) minimum
n
Maximum Opening
n
n
n
SE, SEL Electrical Options
Templating allows 110°
Hold-open points between 85° and 110° in approximately 3° increments
SEL track provides hold-open points between 90° and 120°‚ in approximately 3° increments
n
n
Long (SEL) track
n
SE Wiring Diagram
2´4˝ (711 mm) minimum for single door with SE
4´8˝ (1422 mm) minimum for paired doors with SE
These track assemblies require a single power circuit for the holding solenoid
SE or SEL holding solenoid is either 24V or 120V input, please specify
An optional 4040SE-3210 or 8310-824 TRANSFORMER reduces 120V AC line voltage to 24V AC
Circuitry accepts either AC or DC input
n
n
Options
12-1/4"
311 mm
Minimum 5-3/4˝ (146 mm)
Installation with PLATE, 4040SE-18PA requires SPECIAL TEMPLATE and 2˝ (51 mm) minimum top rail
Door Width
n
1-1/16"
27 mm
To either terminal
INPUT WIRES
To either terminal
Green ground
Terminal
Notes:
• Information applies to 4040 SE closers unless otherwise specified
• Momentary on/off switch board assembly for testing door release also provides over-voltage protection. Field replaceable
• Functions as a full rack and pinion closer when hold-open is not engaged or current is interrupted
17
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4040SE
Series
Accessories
Accessories
Cylinder
4040SE-3071
Cylinder Assembly
Non-handed
n
Cast iron
n
n
Standard
Covers
4040SE-72MC
Metal Cover
4040SE-72
Plastic Cover
n
Handed
Non-handed
n
Required for plated finishes and
custom powder coat finishes
Clip-on
n
n
n
Standard
n
Arms
4040SE-3077T
Standard Arm
Non-handed
n
n Adjustable to select hold-open
point
Optional
Tracks
4040SE-3038
SE Track
4040SE-3077DE
Double Egress Arm
Non-handed
Handed
Non-handed
n
n
For pull side installations on
double egress doors and frames
n
Not required for push side
mounting on double egress
frames
n
n
4040SEL-3038
SEL Long Track
n
For SE closers. Mounts on either
head frame or stop
n
24V or 120V AC/DC input
for holding solenoid, please
specify.
24V or 120V AC/DC input
standard for holding solenoid,
please specify
n
n
Includes test switch assembly
with fuse
Optional
n
n
18
Standard
Mounts on either head frame or
stop
n
Includes test switch assembly
with fuse
n
n
Optional
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4040SE
Series
WIRING DIAGRAM
INPUT VOLTAGE
24V AC/DC
OR 120V AC/DC
(USUALLY FROM
ALARM PANEL
OR DETECTOR)
Accessories
Accessories
Switch
4040SE-3436
Test Switch
Installation Accessories
4040SE-18
Plate
4040SE-81
Conduit Quick-Connector
4040SE-18PA
Plate
Required where top rail is less
than 3-1/2˝ (89 mm)
n
Requires minimum 2˝ (51 mm)
top rail
n
Installations require a SPECIAL
TEMPLATE
n
Required where top rail is less
than 5-3/4˝ (146 mm)
n
Two piece connector for use
with 1/2˝ conduit
n
4040SE-3034SE
Track Roller & Track Slider
Quiet, low friction roller
assembly
n
Shoulder dimension “X” = 1/8˝
(3 mm)
Requires minimum 2˝ (51 mm)
top rail
n
Installations require a SPECIAL
TEMPLATE
n
n
Alloy metal slider for use in SE
series tracks only
n
4040SE-3210
Transformer
Reduces line voltage from 120V
to 24V AC
n
Mounted on cover for 4˝ (102
mm) x 4˝ x 2-1/8˝ (54 mm)
junction box (by others)
n
19
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4040SE
Series
Ordering Information
How-to-order 4040SE Series closers
Closer will be shipped with:
- Standard cylinder
- Standard clip-on cover
- Standard arm
- Standard track
- Wood & machine screw pack
Select cylinder size
SE
SEL
Voltage
24V AC/DC
120V AC/DC
unless options listed below are selected.
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass.
Closer options
Installation accessories
Plate, 4040SE-18
Plate, 4040SE-18PA
Transformer, 4040SE-3210
Cover
Metal (MC) (please specify right or left hand)
Finishes
Custom Powder Coat (RAL) (handed metal cover required)
Plated Finish, US ___________ (handed metal cover required)
Special template
ST- ________
Arm
Double Egress (DE) (please specify right or left hand)
Screw pack
TB*, Wood & Machine Screw (TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTRX)
* Specify door thickness if other than 1-3/4˝
Table of sizes
n
n
4040SE series cylinders accommodate interior doors up to 48˝ (1219 mm) wide
Closing power of 4040SE Series closers is adjustable through a range of sizes up to size 4
Interior door width
28˝
34˝
38˝
48˝
711mm
864mm
965mm
1219mm
size 3
4040SE
size 4
Minimum door width
Indicates recommended range of door width for closer size.
20
NOTE: For SE on paired door, min. width 60˝ (1524 mm).
For SE, minimum door width 28˝ (711 mm).
For SEL, minimum door width 30˝ (762 mm).
Details are listed on the MOUNTING DETAILS pages.
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2310ME
Series
Features
The 2310ME SENTRONIC® is a concealed heavy duty, electrically controlled closer/holder
designed to provide infinitely adjustable hold-open for fire and smoke barrier doors. Door
is held open until current interruption releases mechanism and the door closes. Single lever
(track) arm closer is specifically designed for interior doors. Choice of finishes, cylinder
functions, and installation accessories meet virtually all life safety requirements.
Fasteners
Wood and machine screw pack
Mounting
Concealed (in frame)
Arms
Standard handed arm and non-handed
track ( two piece metal finish plate)
Finishes/Colors/
Powder Coat
Cast iron Body
Full Complement Bearing
n 1-1/2˝ Diameter Piston
n 11/16˝ Diameter Double Heat Treated
Pinion Journal
n
n
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
n
n
n
n
n
n
n
Optional SRI primer - powder coat only
Ooptional plated finishes
n
Fluid
All Weather Fluid
Handing
Handed
n
Wiring
Size
Sized, 4 only
Warranty
2 years
Concealed or exposed
Built in on/off switch controls hold-open
function
n Interfaces with fire alarm system
n
n
Special
Templates
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
/1
4
SS
0
ST
AN
DA
RE
R
GU D (S
IN
LA
SW R (D GLE)
IN OUB
G
LE
F
)
D
SIN
GL
E
ND
NO ED
NS
SI IZE
D
ZE
D
PL
AS
T
M IC
ET
AL
PO
W
D
PL ER C
AT
O
ED AT
ED
CE
AL
HI
NG
E
TO (PU
L
P
JA L) S
ST MB IDE
OP
(
F PU
CO ACE SH
NC
(P )
EA
US
LE
H)
CO
D
N
(
*ARM FUNCTION
CYLINDER
PO
IN
M
TH
UL
TIOL
PO
DI
BY NT OPEN
PA HOL
SS D-O
80 PEN
COVER
FR
AM
E)
(D
OO
R)
FINISH
HA
MOUNTING
RE
BL E
E
EG
RE
Body Construction
Grade 1 - ANSI A156.15, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act,
NFPA 101
OU
Certifications
160°
* Maximum opening/hold-open point with standard template. See individual closer series for
degrees of opening per installation.
AVAILABLE
NOT AVAILABLE
21
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2310ME
Series
Mounting details
Concealed
Mounting
7/8"
22 mm
1"
25 mm
20-1/4"
514 mm
1"
25 mm
3-5/8"
92 mm
3/8"
10 mm
1-1/4"
32 mm
2-1/16"
52 mm
10-3/16"
259 mm
22-1/2"
572 mm
1-3/8"
35 mm
1/4"
6 mm
of track
to of closer
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Top Rail
n
n
1-3/8˝ (35 mm) mortise required
5/16˝ (8 mm) cutout required at top of door, stop face only
Door Thickness
1-3/4˝ (44 mm) minimum
Door Width
2´4˝ (711 mm) minimum
Hollow Metal Frame
n
n
Bypass
n
n
n
Requires minimum 4˝ (102 mm) x 4˝ frame
Consult factory or template for preparation details
(suffix “B80” or “B140”) eliminates hold-open function up to a specified point of door swing
B80 cylinder from 0° to 80°
B140 cylinder from 0° to 140°
Maximum Opening
Templating allows 180° with hold-open points up to 160°
Options
n
n
1-1/16"
27 mm
Hold-open bypass
24V or 120 volt input, please specify
Me (2310) Wiring Diagram
WIRING DIAGRAM
Input voltage 24V AC/DC
or 120V AC/DC
(usually from alarm
panel or detector)
Chassis Ground
Notes
• For interior smoke barrier and labeled fire doors
• Functions as full rack and pinion door closer when hold-open is not engaged or when current is interrupted
22
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1-3/8"
35 mm
2310ME
Series
Accessories
Cylinders
Arm
2310ME-3971
ME Cylinder Assembly
Handed
n
Cast iron
n
Handed
n
n
Specify 24V or 120V
n
Circuitry accepts either AC or DC
input. Specify 24V or 120V
n
Standard
CHASSIS GROUND
Switch
2310ME-3351
Switch
2310ME-3038
Standard Track
n
INPUT VOLTAGE
24V AC/DC
OR 120V AC/DC
(USUALLY FROM
ALARM PANEL
OR DETECTOR)
Standard
Track
Non-handed
WIRING DIAGRAM
n
Standard
n
Handed
“On/Off” switch assembly
controls the hold-open function.
n
n
2310ME-3077T
Standard Arm
2310ME-3071
ME Cylinder/Plate Assembly
“On/Off” switch assembly
provides continuous hold-open
function
n
n
24V or 120V, please specify
Installation Accessories
2310ME-420
Fire Shield
22 gauge steel liner mounts in
the track mortise of the door’s
top rail for 20 minute labeled
wood doors with hollow metal
frames
n
2310ME-3034
Track Roller
2310ME-3210
Transformer
Reduces line voltage from 120V
to 24V AC
n
Mounted on plate for 4˝ (102
mm) x 4˝ x 2-1/8˝ (54 mm)
junction box (by others)
n
Quiet, low friction roller
assembly
n
Shoulder dimension “X” = 1/16˝
(2 mm)
n
23
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2310ME
Series
Ordering Information
How-to-order 2310ME Series closers
Closer will be shipped with:
- Finish plates
- Standard arm
- Standard track
- Track roller
- Wood & machine screw pack
Select hand
RH
LH
Voltage
24V AC/DC
120V AC/DC
unless options listed below are selected.
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass.
Closer options
Cylinder function
Bypass 80° (B80)
Bypass 140° (B140)
Finishes
Custom Powder Coat (RAL) ___________
Plated Finish, US ___________
Screw pack
TORX Machine Screw (TORX)
Installation accessories
Fire Shield, 2310ME-420
Transformer, 2310ME-3210
Special template
ST- ________
Table of sizes
n
Closing power of 2314ME Series closers may be increased 15%
Interior door width
28˝
34˝
38˝
48˝
711mm
864mm
965mm
1219mm
size 4
2314
Minimum door width
Indicates recommended range of door width for closer size.
24
NOTE: For SE, minimum door width 28˝ (711mm)
For SEL, minimum door width 32˝ (813mm)
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4310ME
Series
Features
The 4310ME SENTRONIC® is a heavy duty, electrically controlled closer/holder designed to provide
infinitely adjustable hold-open for fire and smoke barrier doors. Door is held open until current
interruption releases mechanism and the door closes. Single lever (track) arm closer is specifically
designed for interior doors. Choice of finishes, cylinder functions, and installation accessories meet
virtually all life safety requirements. An ME provides only the closer / holder function.
Cast Iron Body
Full Complement Bearing
n 1-1/2˝ Diameter Piston
n 11/16˝ Diameter Double Heat Treated
Pinion Journal
n
n
Cover
Metal, Standard
Fasteners
Wood and machine screw pack
Mounting
Hinge (Pull Side)
Arms
Swing free arm, standard
Double egress, optional
Finishes/Colors/
Powder Coat
n
n
Fluid
All Weather Fluid
Handing
Handed
Size
Sized, 4 only
Warranty
2 years
n
Wiring
Concealed or exposed electrical connectors
n Built in “On/Off” switch controls holdopen function
n Interfaces with fire alarm systems
n
n
n
n
n
Special
Templates
n
160
ES
S
95
* Maximum opening/hold-open point with standard template. See individual closer series for
degrees of opening per installation.
AVAILABLE
NOT AVAILABLE
25
LCN Door Control Catalog
phone: 877-671-7011
EG
R
/1
EE
4
0
ST
AN
D
RE ARD
GU
(
LA SIN
G
SW R (D LE)
OU
IN
BL
G
FR E)
D
SIN
GL
E
ND
NO ED
NS
SI IZE
D
ZE
D
HA
AS
TI
C
ET
AL
M
PL
W
D
PL ER C
AT
O
ED AT
PO
*ARM FUNCTION
CYLINDER
E
COVER
PO
IN
M
TH
UL
TIOL
PO
DBY INT OPEN
PA HOL
SS D-O
80 PEN
FINISH
FR
AM
E)
(D
OO
R)
ED
AL
CE
Optional SRI primer - powder coat only
Optional plated finishes
n
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
MOUNTING
HI
NG
E
TO (PU
L
P
JA L) S
ST MB IDE
OP
(
F PU
CO ACE SH
NC
(P )
EA
US
LE
CO
H)
D
N
(
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
BL
Body Construction
Grade 1 - ANSI A156.15, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act,
NFPA 101
OU
Certifications
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4310ME
Series
Mounting details
Hinge (Pull) Side
Mounting
1/2"
13 mm
19"
483 mm
1-1/4"
32 mm
2-9/16"
65 mm
Butt Hinges
Should not exceed 4-1/2˝ (114 mm) in width
Top Rail
1-1/16˝ (27 mm) minimum
Reveal
n
n
Requires 2˝ (51 mm) minimum
Clearance
1-1/4˝ (32 mm) behind door required for installation
Bypass
n
n
Maximum Opening
n
n
n
n
n
ME Electrical Options
n
n
n
n
Options
n
n
E (4310, 4410)
M
Wiring Diagram
1-1/16"
27 mm
Should not exceed 1/8˝ (3 mm) for Swing-Free arm
Should not exceed 2-11/16˝ (68 mm) for double egress arm
Head Frame
n
22-3/4"
578 mm
1"
25 mm
3-1/2"
89 mm
3-7/8"
98 mm
(suffix “B80 or B140”) eliminates hold-open function up to a specified point of the doors swing
B80 cylinder from 0° to 80°
B140 cylinder from 0° to 140°
Templating allows 180° with hold-open points up to 160°
Optional double egress arm limited to 95°
Please note that many track style door closers are capable of allowing 180° of door swing.
Be aware that the majority of track style closers are at their weakest closing force in the 180° – 130° range
Consult factory for applications where exterior or large/heavy door must swing 180°
These assemblies have a single electrical circuit with a choice of voltages
A separate TRANSFORMER, 4040SE-3210, can be used to reduce line voltage to 24V AC
Circuitry accepts either AC or DC input
Please specify 24V or 120V
Hold-open bypass
24V or 120 volt input, please specify
Input Wires
(18 Gauge Black)
Wire Harness Connector
Capacitor
(24V Only)
Rectifier
Earth Ground
(Green)
On/Off Switch
Solenoid
Power Plug
Solenoid Holding Force
Adjustment Potentiometer (24V Only)
Notes:
• Information applies to ME closer
• Functions as full rack and pinion door closer when hold-open is not engaged or when current is interrupted with Swing-Free arm engaged
• Swing free arm allows door to be moved without door closer resistance
26
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4310ME
Series
Accessories
Cylinder
Cover
4310ME-3971
ME Cylinder Assembly
n
Handed
n
n
Cast iron
n
n
Specify 24V or 120V
n
Standard
Handed
“On/Off” switch assembly
controls hold-open function
Handed
n
Standard
Circuitry accepts either AC or DC
input
n
24V or 120V, please specify
n
Standard
Track
4310ME-3077DE
Double Egress Arm
4310ME-3077SF
Swing-Free Arm
Handed
n
After door is placed in holdopen, secondary pivot point
allows up to 160° swing
without door closer resistance
n
n
n
Arms
n
4310ME-72MC
Metal Cover
4310ME-3071
ME Cylinder/Plate Assembly
4310ME-3038
Track
Handed
For double egress doors and
frames
n
n
Non-handed
n
Standard
2-11/16˝ (68 mm) maximum
reveal
n
n
Optional
27
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4310ME
Series
Accessories
WIRING DIAGRAM
Switch
INPUT VOLTAGE
24V AC/DC
OR 120V AC/DC
(USUALLY FROM
ALARM PANEL
OR DETECTOR)
24V shown
CHASSIS GROUND
120V shown
4310ME-3351
Switch Assembly
Provides continuous hold-open
function
n
n
24V or 120V, please specify
Installation Accessories
4310ME-3034
Track Roller
n
Quiet, low friction roller assembly
Shoulder dimension “X” = 1/8˝
(3mm)
n
4310-3210
Transformer
4310ME-3354
ME Wiring Harness
Reduces line voltage from 120V
to 24V AC
n
Mounted on cover for 4˝ (102
mm) x 4˝ x 2-1/8˝ (54mm)
junction box (by others)
n
28
Three wire harness with 6˝
(152 mm) leads for field wiring
connections
n
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4310ME
Series
Ordering Information
How-to-order 4310ME Series closers
Closer will be shipped with:
- Standard cover
- Swing-free (sf) arm
- Standard track
- Track roller
- Wood & machine screw pack
Select hand
RH
LH
Voltage
24V AC/DC
120V AC/DC
unless options listed below are selected.
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass.
Closer options
Installation accessories
Transformer, 4310ME-3210
Cylinder function
Bypass 80° (B80)
BBypass 140° (B140)
Special template
ST- ________
Arm
Double Egress (DE)
Finishes
Custom Powder Coat (RAL) ___________
Plated Finish, US ___________
Screw pack
TB*, Wood & Machine Screw (TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTRX)
*Specify door thickness if other than 1-3/4˝.
Table of sizes
n
Closing power of 4314ME Series closers may be increased 15%
Interior door width
26˝
34˝
38˝
48˝
660mm
864mm
965mm
1219mm
size 4
4314ME
Minimum door width
Indicates recommended range of door width for closer size.
29
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
30
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4410ME
Series
Features
The 4410ME SENTRONIC® is a heavy duty, electrically controlled closer/holder designed
to provide infinitely adjustable hold-open for fire and smoke barrier doors. Door is held
open until current interruption releases mechanism and the door closes. Double lever arm
closer is specifically designed for interior doors. Choice of finishes, cylinder functions, and
installation accessories meet virtually all life safety requirements.
Cover
Metal, Standard
Fasteners
Wood and machine screw pack
Mounting
Top jamb (Push Side)
Cast iron Body
n Full Complement Bearing
n 1-1/2˝ Diameter Piston
n 11/16˝ Diameter Double Heat Treated
Pinion Journal
Arms
Regular arm
n
Finishes/Colors/
Powder Coat
n
n
n
n
n
n
Fluid
All Weather Fluid
n
Handing
Handed
n
Size
Sized, 4 only
Warranty
2 years
n
Wiring
n
n
Special
Templates
Optional SRI primer - powder coat only
Optional plated finishes
Concealed or surface
Interfaces with fire alarm systems
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
SS
RE
EG
/1
EE
4
0
ST
AN
D
RE ARD
GU
(
LA SIN
SW R (D GLE
IN OUB )
G
DO FR LE)
SIN
GL
E
ND
NO ED
NS
SI IZE
D
ZE
D
PL
AS
T
M IC
ET
AL
PO
W
D
PL ER C
AT
O
ED AT
D
LE
CE
A
*ARM FUNCTION
CYLINDER
PO
IN
M
TH
UL
TIOL
PO
DBY INT OPEN
H
PA
OL
SS D-O
80 PEN
COVER
FR
AM
E)
(D
OO
R)
FINISH
HA
MOUNTING
HI
NG
E
TO (PU
L
P
JA L) S
ID
M
ST
OP B ( E
P
U
F
CO ACE SH
NC
(P )
EA
US
LE
CO
H)
D
N
(
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
LE
Body Construction
Grade 1 - ANSI A156.15, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act,
NFPA 101
UB
Certifications
150
* Maximum opening/hold-open point with standard template. See individual closer series for
degrees of opening per installation.
AVAILABLE
NOT AVAILABLE
31
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4410ME
Series
Mounting details
Top Jamb (Push Side)
Mounting
3-1/2"
89 mm
1-1/8"
29 mm
11-11/16"
297 mm
2-9/16"
65 mm
2-11/16"
68 mm
8-9/16"
217 mm
3/4"
19 mm
1-5/8"
41 mm
4410 ME-18G
4410 ME-18
19"
483 mm
Butt Hinges
Should not exceed 4-1/2˝ (114 mm) in width
Top Rail
n
n
Reveal
n
n
Head Frame
n
n
1-3/4˝ (44 mm) minimum
3-3/4˝ (95mm) minimum with flush ceiling
3-7/8˝ (98 mm) maximum regular or long arm
For reveals greater than 3-7/8˝ consult factory
Requires 1-1/2˝ (38 mm) minimum
2˝ (51 mm) minimum with flush ceiling
Flush Ceiling
Requires PLATE, 4410ME-18G substituted for standard mounting plate
Bypass
n
n
n
Maximum Opening
n
n
ME Electrical Options
(Suffix “B80” or “B140”) eliminates hold-open function up to a specified point of door swing
B80 cylinder from 0° to 80°
B140 cylinder from 0° to 140°
Templating allows 160°, with hold-open points up to 150°
Optional long arm allows 180°, hold-open points up to 170°
These assemblies have a single electrical circuit with a choice of voltages
A separate TRANSFORMER, 4040SE-3210, can be used to reduce line voltage to 24V AC. Circuitry accepts either AC
or DC input
n Please specify 24V or 120V
n
n
Options
n
n
n
n
E (4310, 4410)
M
Wiring Diagram
Hold-open bypass
Optional long arm allows 180° with hold-open points up to 170°
Optional –18G plate accommodates flush ceiling conditions
24V or 120V volt input, please specify
Input Wires
(18 Gauge Black)
Wire Harness Connector
Capacitor
(24V Only)
Rectifier
Earth Ground
(Green)
On/Off Switch
Solenoid
Power Plug
Solenoid Holding Force
Adjustment Potentiometer (24V Only)
32
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4410ME
Series
Accessories
Cylinders
Cover
4414ME-3971
ME Cylinder Assembly
4410ME-72MC
Metal Cover
4414ME-3071
ME Cylinder/Plate Assembly
n
Handed
n
n
Cast iron
n
n
Specify 24V or 120V
n
Standard
Handed
n
Handed
“On/Off” switch assembly
controls hold-open function
Circuitry accepts either AC or DC
input
n
n
Please specify 24V or 120V
n
Standard
Arms
4410ME-3077L
Long Arm
4410ME-3077
Regular Arm
n
Non-handed
n
3-7/8˝ (98 mm) maximum
reveal
n
For increasing opening to 180°
3-7/8˝ (98 mm) maximum
reveal
n
n
Optional
33
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4410ME
Series
Accessories
WIRING DIAGRAM
INPUT VOLTAGE
24V AC/DC
OR 120V AC/DC
(USUALLY FROM
ALARM PANEL
OR DETECTOR)
Switch
24V shown
CHASSIS GROUND
120V shown
4410ME-3351
Switch Assembly
Provides continuous hold-open
function
n
Available as 24V or 120V, please
specify
n
Installation Accessories
4410ME-18
Mounting Plate
n
Standard
4410ME-18G
Mounting Plate
4410ME-3354
ME Wiring Harness
4410ME - 3210
Transformer
Substituted for standard plate on
flush ceiling installations
n
Optional
Reduces line voltage from 120V to
24V AC
n
Mounted on cover for 4˝ (102 mm)
x 4˝ x 2-1/8˝ (54 mm) junction
box (by others)
n
n
34
Three wire harness with 6˝
(152 mm) leads for field wiring
connections
n
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4410ME
Series
Ordering Information
How-to-order 4410ME Series closers
Closer will be shipped with:
- Standard cover
- Regular arm
- Wood & machine screw pack
Select hand
RH
LH
unless options listed below are selected.
Voltage
24V AC/DC
120V AC/DC
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass.
Closer options
Installation accessories
Plate, 4410ME-18G
(substituted for standard mounting plate)
Transformer, 4410ME-3210
Cylinder function
Bypass 80° (B80)
Bypass 140° (B140)
Arm
Special template
ST- ________
Long (LONG)
Finishes
Custom Powder Coat (RAL)
Plated Finish, US
Screw pack
TB*, Wood & Machine Screw (TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTRX)
*Specify door thickness if other than 1-3/4˝
Table of sizes
n
Closing power of 4414ME Series closers may be increased 15%
Interior door width
24˝
34˝
38˝
48˝
610mm
864mm
965mm
1219mm
size 4
4414ME
Minimum door width
Indicates recommended range of door width for closer size.
35
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
36
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4310 HSA
Series
Features
The 4310HSA SENTRONIC® is an electrically controlled closer/holder designed to provide
easy passage for groups of pedestrians through high traffic doors. Pedestrians, moving
through the doorway, trigger the built-in scanner. When the door is opened to 80° or more,
the door is electrically held open to minimize wear and tear on applied door hardware.
After the last pedestrian in a group passes through the doorway, the system timer releases
the hold-open, closing the door under control of the heavy duty closer. Single lever (track)
arm closer is specifically designed for pull side mounting. Choice of finishes and accessories
meet virtually all high traffic installation requirements.
Cover
Metal, Standard
Arms
n
Cast Iron Body
Full Complement Bearing
n 1-1/2˝ Diameter Piston
n 11/16˝ Diameter Double Heat Treated
Pinion Journal
Finishes/Colors/
Powder Coat
Standard arm (with track)
Double egress arm, optional
n
n
n
n
n
n
n
n
n
n
Optional SRI primer - powder coat only
Optional plated finishes
All Weather Fluid
n
n
Handing
Handed
Size
Sized, 1-6
Warranty
2 years
Fasteners
Wood and machine screw pack
Mounting
Hinge (Pull Side)interior doors
Wiring
Concealed or surface wiring
24V AC/DC input only
n 120V requires 4310HSA-3210 transformer
n HSA features a scanner activated holdopen function, fixed 15 seconds or 30
seconds
n
n
Special
Templates
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
HA
160°
SS
RE
EG
95
95°
* Maximum opening/hold-open point with standard template. See individual closer series for
degrees of opening per installation.
AVAILABLE
NOT AVAILABLE
37
LCN Door Control Catalog
phone: 877-671-7011
EE
4
/1
ND
NO ED
NS
SI IZE
D
ZE
D
IC
AL
ST
ET
M
PL
A
W
D
PL ER C
AT
O
ED AT
PO
ED
CE
AL
HI
NG
E
TO (PU
L
P
JA L) S
ST MB IDE
OP
(
F PU
CO ACE SH
NC
(P )
EA
US
L
CO
H)
ED
N
(
*ARM FUNCTION
CYLINDER
PO
IN
M
TH
UL
TIOL
PO
DBY INT OPEN
H
PA
O
SS LD-O
80 PEN
COVER
FR
AM
E)
(D
OO
R)
FINISH
SIN
GL
E
MOUNTING
0
ST
AN
DA
R
RE
GU D (S
IN
LA
G
SW R (D LE)
O
UB
IN
G
L
DO FR E)
Fluid
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
LE
Body Construction
Grade 1 - ANSI A156.4, ANSI 156.15, NFPA 101,
UL 10C, ADA, 100 Hour Salt Spray, Meets BAA
- Buy American Act
UB
Certifications
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4310 HSA
Series
Mounting details
Hinge (Pull) Side
Mounting
1/2"
13 mm
3-7/8"
98 mm
24"
610 mm
1-1/4"
32 mm
2-9/16"
65 mm
22-3/4"
578 mm
1"
25 mm
3-1/2"
89 mm
Butt Hinges
Should not exceed 4-1/2˝ (114 mm) in width
Top Rail
1-1/16˝ (27 mm) minimum
Reveal
n
n
Should not exceed 1/8˝ (3 mm) for standard arm
Should not exceed 2-11/16˝ (68 mm) for double egress arm
Head Frame
Requires 2˝ (51 mm) minimum
Clearance
1-1/4˝ (32 mm) minimum.
Maximum Opening
n
n
Templating allows 180°
Optional double egress arm limited to 95°
Infinite hold-open points from 80° up to 160°
n
120 volt input requires 4310HSA-3210 transformer to change 120V AC to 24V AC
n
Options
HSA (4310)Wiring Diagram
Connect Green Wire
to Earth Ground
Connect Black Wires
to Input Voltage Leads
(polarity not important)
Notes:
• Functions as full rack and pinion door closer when current is interrupted or continuous hold-open is not engaged
• Built-in “On/Off” switch provides continuous hold-open function
38
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
1-1/16"
27 mm
4310 HSA
Series
Accessories
WIRING DIAGRAM
INPUT VOLTAGE
24V AC/DC
OR 120V AC/DC
(USUALLY FROM
ALARM PANEL
OR DETECTOR)
Cylinders
Cover
Track
CHASSIS GROUND
4311HSA-3971
HSA Cylinder Assembly
n
Handed
n
n
Cast iron
n
Handed
Includes scanner module and
system timer module
24V AC/DC input only for
holding solenoid
n
n
4310HSA-72MC
Metal Cover
4311HSA-3071
HSA Cylinder/Plate Assembly
4310HSA-3038
Track
n
Handed
n
Non-handed
n
Standard
n
Standard
“On/Off” switch assembly
provides continuous hold-open
function
n
Standard
24V AC/DC input only for holding
solenoid and electronics modules
n
n
Standard
3448
Arms
Switch
Scanner
3351
4310HSA-3077DE
Double Egress Arm
4310HSA-3077T
Standard Arm
n
Handed
n
4310HSA-3448
Switch Assembly
Handed
4310HSA-3428
Scanner Module
Provides continuous hold-open
function
n
For double egress doors and
frames
n
n
Available in 24V only
2 11/16˝ (67 mm) maximum
reveal
n
n
Optional
Installation Accessories
4310HSA-3034
Track Roller
4310HSA-3210
Transformer
Quiet, low friction roller
assembly
Reduces line voltage from 120V
to 24V AC
n
n
Shoulder dimension “X” = 1/8˝
(3 mm)
n
Mounted on plate for 4˝
(102 mm) x 4˝ x 2-1/8˝ (54 mm)
junction box (by others)
n
39
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4310 HSA
Series
Ordering Information
How-to-order 4310 HSA Series closers
Closer will be shipped with:
- 24 Ac/dc hsa cylinders
- Metal cover
- Standard arm
- Standard track
- Track roller
- Wood & machine screw pack
Select hand
RH
LH
Voltage
24V AC/DC
unless options listed below are selected.
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass.
Closer options
Arm
Double Egress (DE)
Finishes
Custom Powder Coat (RAL) ___________
Plated Finish, US ___________
Screw pack
TB*, Wood & Machine Screw (TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTRX)
* Specify door thickness if other than 1-3/4˝
Installation accessories
Transformer, 4310HSA-3210
Special template
ST- ________ (if required)
Table of sizes
n
Closing power of 4310 HSA Series closers may be increased 15%
Interior door width
26˝
34˝
38˝
48˝
660mm
864mm
965mm
1219mm
4311HSA
Minimum door width
Indicates recommended range of door width for closer size.
40
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4410 HSA
Series
Features
The 4410HSA SENTRONIC® is an electrically controlled closer/holder designed to provide easy
passage for groups of pedestrians through high traffic doors. Pedestrians, moving through
the doorway, trigger the built-in scanner. When the door is opened to 80° or more, the door
is electrically held open to minimize wear and tear on applied door hardware. After the last
pedestrian in a group passes through the doorway, the system timer releases the hold-open,
closing the door under control of the heavy duty closer. Double lever arm closer is specifically
designed for push side mounting. Choice of finishes and accessories meet virtually all high
traffic installation requirements.
Certifications
Arms
Grade 1 - ANSI A156.4, ANSI 156.16, NFPA 101,
UL 10C, ADA, 100 Hour Salt Spray, Meets BAA
- Buy American Act
n
n
Finishes/Colors/
Powder Coat
n
n
n
Body Construction
Cast Iron Body
n Full Complement Bearing
n 1-1/2˝ Diameter Piston
n 11/16˝ Diameter Double Heat Treated
Pinion Journal
n
n
n
n
n
Standard arm and track
Double egress, optional
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
Optional SRI primer - powder coat only
Optional plated finishes
n
n
Fluid
All Weather Fluid
Handing
Handed
Size
Sized, 1-6
Warranty
2 years
Fasteners
Wood and machine screw pack
Mounting
Hinge (Pull Side) for interior
Cover
Metal, Standard
Wiring
n
Special
Templates
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
RE
EG
LE
UB
/1
EE
4
0
ST
AN
D
RE ARD
GU
(
LA SIN
SW R (D GLE
IN OUB )
G
L
DO FR E)
SIN
GL
E
ND
NO ED
NS
SI IZE
D
ZE
D
HA
PL
AS
T
M IC
ET
AL
SS
*ARM FUNCTION
CYLINDER
T
COVER
CO
A
R
ED
DE
AT
W
PL
PO
CE
A
LE
D
FR
AM
E)
(D
OO
R)
FINISH
PO
IN
M
TH
UL
TIOL
PO
DBY INT OPEN
PA HOL
SS D-O
80 PEN
MOUNTING
HI
NG
E
TO (PU
L
P
JA L) S
ST MB IDE
OP
(
F PU
CO ACE SH
NC
(P )
EA
US
LE
CO
H)
D
N
(
Concealed or surface
24V AC/DC input only
n 120V AC input requires 4310HSA-3210
transformer
n HSA features a scanner activated holdopen function, adjustable 15 seconds or
30 seconds
n Built-in “On/Off” switch provides
continuous hold-open feature
n
150°
* Maximum opening/hold-open point with standard template. See individual closer series for
degrees of opening per installation.
AVAILABLE
NOT AVAILABLE
41
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4410 HSA
Series
Mounting details
Top Jamb (Push) Side
Mounting
4410 HSA - Hold open any point 80° to 160°
4410 HSAL - Hold open any point 80° to 170°
“L” Indicates Long Arm
1-1/4" Dia. for electrical connetor if
concealed conduit option is used
3-7/8"
8"
1-1/8"
11-1/8"
Optional
wiring
connections
7/8"
3/4" Jamb
Line
3/8"
3/4"
Top of door
3/4"
Jamb
Line
1-1/4"
1-15/16"
Reveal
See note (2)
(8) 1/4 - 20 x 5/8 P.H.M.S or
(8) No. 14 x 1-1/5 P.H.W.S
8-15/16"
Hinge Edge of Door
Butt Hinges
Should not exceed 4-1/2˝ (114 mm) in width
Top Rail
n
n
Head Frame
n
n
Reveal
n
n
Maximum Opening
n
n
n
Options
n
n
n
HSA Wiring Diagram
1-1/2" Min.
1-3/4˝ (44 mm) minimum
3-3/4˝ (95 mm) minimum with flush ceiling
Requires 1-1/2˝ (38mm) minimum
2˝ (51 mm) minimum with flush ceiling
3-7/8˝ (98 mm) maximum for regular or long arm
For reveals greater than 3-7/8˝ consult factory
Templating allows 160°
Infinite hold-open points from 80° up to 150°
Optional long arm allows 180°, hold-open points up to 170°
Optional long arm allows 180° with hold-open points up to 170°
Optional –18G plate accommodates flush ceiling conditions
120 volt input requires 4410HSA–3210 transformer to change 120V AC to 24V AC
Connect Green Wire
to Earth Ground
Connect Black Wires
to Input Voltage Leads
(polarity not important)
42
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Door
4410 HSA
Series
Accessories
Cylinders
Cover
4412HSA-3971
n Handed
n
Cast iron
n
Handed
Includes scanner module and
system timer module
24V AC/DC input only for
holding solenoid
n
n
n
4410HSA-72MC
Metal Cover
4412HSA-3071
HSA Cylinder / Plate Assembly
n
Handed
n
Standard
“On/Off” switch assembly
provides continuous hold-open
function
Standard
n
24V AC/DC input only for holding
solenoid and electronics modules
n
n
Standard
3448
Arms
Switch
3351
4410HSA-3077L
Long Arm
4410HSA-3077
Regular Arm
n
Non-Handed
n
3-7/8˝ (98 mm) maximum
reveal
n
4410HSA-3428
Scanner Module
For increased opening
Provides continuous hold-open
function
n
3-7/8˝ (98 mm) maximum
reveal
n
n
Scanner
4410HSA-3448
Switch Assembly
Available in 24V only
n
Optional
Installation Accessories
4410HSA-18
Mounting Plate
n
4410HSA-18G
Transformer Mounting Plate
Standard
Substituted on flush ceiling
installations
n
n
Optional
phone: 877-671-7011
fax: 800-248-1460
n
www.allegion.com/us
Reduces line voltage from 120V
to 24V AC
n
Mounted on plate for 4˝ (102
mm) x 4˝ x 2-1/8˝ (54 mm)
junction box (by others)
n
43
LCN Door Control Catalog
n
4410HSA-3210
Transformer
n
009426 rev. 2/16
4410 HSA
Series
Ordering Information
How-to-order 4410 HSA Series closers
Closer will be shipped with:
- 24 Ac/dc hsa cylinders
- Metal cover
- Regular arm
- Wood & machine screw pack
Select hand
RH
LH
Voltage
24V AC/DC
unless options listed below are selected.
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass.
Closer options
Arm
Installation accessories
Plate, 4410HSA-18
Plate, 4410HSA-18G
(substituted for standard mounting plate)
Transformer,4410HSA-3210
Long Arm (LONG)
Finishes
Custom Powder Coat (RAL) ___________
Plated Finish, US ___________
Special template
ST- ________ (if required)
Screw pack
TB*, Wood & Machine Screw (TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTRX)
* Specify door thickness if other than 1-3/4˝
Table of sizes
n
Closing power of 4410 HSA Series closers may be increased 15%
Interior door width
24˝
34˝
38˝
48˝
610mm
864mm
965mm
1219mm
4412HSA
Minimum door width
Indicates recommended range of door width for closer size.
44
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
SEH
Series
Features
The SEH SENTRONIC® is a holder designed to provide single point hold-open for fire and
smoke barrier doors that must be used with an opposite side mounted UL listed door closer.
The door is held open until current interruption releases the holding mechanism and the door
closes. Single lever (track) arm is specifically designed for interior doors. Choice of finishes,
track functions, and installation accessories meet virtually all life safety requirements.
Grade 1 - ANSI A156.15, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act,
NFPA 101
Finishes/Colors/
Powder Coat
n
n
n
n
Handing
Non-Handed
Templating
22 3/4˝ x 1 1/4˝
Warranty
2 years
n
Fasteners
Wood and machine screw pack
n
Mounting
Hinge (Pull Side)
Arms
n
n
n
Optional SRI primer - powder coat only
Optional plated finishes
n
Standard, non-handed arm for any
4040SE Series
n Standard, non-handed track for SEH
n Specify 24V or 120V AC/DC input for
holding solenoid
n Includes test switch assembly with fuse
Special
Templates
Wiring
Concealed or surface
24V or 120V, please specify
n Interfaces with alarm system, please
consult with factory for full details
n
n
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
S
RE
S
EG
EE
E
BL
/
14
ST
0
AN
DA
RE
R
GU D (S
IN
LA
G
SW R (D LE)
OU
IN
B
L
G
FR E)
D
ND
NO ED
NS
SI IZE
D
ZE
D
HA
AS
TI
C
ET
AL
M
PL
W
D
PL ER C
AT
O
ED AT
PO
ED
AL
CE
*ARM FUNCTION
**CYLINDER
PO
IN
M
TH
UL
TIOL
PO
DBY INT OPEN
PA HOL
SS D-O
80 PEN
COVER
FR
AM
E)
(D
OO
R)
FINISH
SIN
GL
E
MOUNTING
HI
NG
E
TO (PU
L
P
JA L) S
ST MB IDE
OP
(
F PU
CO ACE SH
NC
(P )
EA
US
L
CO
H)
ED
N
(
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
OU
Certifications
100
* Maximum opening/hold-open point with standard template. See individual closer series for
degrees of opening per installation.
** Cylinder sold separately.
AVAILABLE
NOT AVAILABLE
45
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
22-3/4"
578 mm
2-7/8"
73 mm
SEH
Series
Mounting details
2-7/8"
73 mm
1-11/16"
43 mm
Optional
Wiring
Connections
2-7/8"
73 mm
Optional
Wiring
Connections
Optional
Wiring
Connections
22-3/4"
578 mm
Optional
Wiring
Connections
1-11/16"
43 mm
3/4"
19 mm
2-11/16"
68 mm
6-7/8"
175 mm
2-9/16" 65 mm
2-11/16"
68 mm
6-1/2"
165 mm
Optional
Wiring
Connections
Stop face (push side) mount
1-1/4"
32 mm65 mm
2-9/16"
2-11/16"
68 mm
1-1/4"
32 mm
6-1/2"
165 mm
1-11/16"
43 mm
3/4"
19 mm
2-11/16"
68 mm
6-7/8"
175 mm
Hinge (pull) side mount
Hinge (pull) side &
Stop face (push side)
Mountings
3/4"
19 mm
2-11/16"
22-3/4" 68 mm
578 mm
3/4"
19 mm
2-11/16"
68 mm
6-7/8"
175 mm
3/4"
19 mm
2-11/16"
68 mm 6-7/8"
175 mm
6-7/8"
175 mm
22-3/4"
578 mm
2-9/16" 65 mm
2-11/16"
68 mm
3-1/8"
79 mm
22-3/4"
578 mm
Optional Wiring
Connections
2-11/16"
Optional Wiring
68 mm
Connections
6-1/2"
165 mm
2-9/16" 65 mm
3-1/8"
79 mm
6-1/2"
165 mm
1-1/4"
32 mm
22-3/4"
578 mm
Butt Hinges
Swing Clear Hinges
3-1/8"
79 mm
1-1/4"
Should not exceed 5˝ (127 mm)
in width
32 mm
Optional Wiring
Consult factory
Connections
2-9/16" 65 mm
22-3/4"
578 mm
Auxiliary Stop
Recommended at hold-open
2-11/16" point
Reveal
Should not exceed 1/8˝ (3 mm) for standard arm
Head Frame
Requires 2˝ (51 mm) minimum
Stop Width
1-1/4˝ (32 mm) minimum
Flush Ceiling
2˝ (51 mm) head frame does not require special templating
Door Width
1-1/4"
n
Maximum Opening
n
32 mm
68 mm
n
n
SEH Electrical Options
6-1/2"
165 mm
3-1/8"
79 mm
Optional Wiring
Connections
2´4˝ (711 mm) minimum for single door with SEH
4´8˝ (1422 mm) minimum for paired doors with SEH
Templating 22-3/4"
allows 100°
3-1/8"
578 mmbetween 80° and 100° in79
mm
Hold-open points
approximately
3° increments
These track assemblies require a single power circuit for the holding solenoid
SEH holding
solenoid
Optional
Wiringis either 24V or 120V input, please specify
Connections
n An optional
4040SE-3210 TRANSFORMER or 8310-824 reduces 120V AC line voltage to 24V AC. Circuitry accepts
either AC or DC input
n
n
Options
n
Wiring Diagram
See “FIRE/LIFE SAFETY” section page 19 for typical wiring and electrical diagram
24V or 120V volt input for SEH, please specify
Notes:
• Information applies to SEH unless otherwise specified
• Standard SEH Series is a door holder that must be installed in conjunction with an opposite side mounted, UL listed door closer
• Hold-open force is adjustable
• Momentary on/off switch board assembly for testing door release also provides over-voltage protection. Field replaceable
• All SEH type holders require a separate closer for fire or smoke barrier door applications
46
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
SEH
Series
Accessories
Arm
Track
SEH-3077T
Holder Arm
n
SEH-3038
SEH Track
Non-handed
n
WIRING DIAGRAM
n Can be combined with any
INPUT VOLTAGE
24V AC/DC
OR 120V AC/DC
(USUALLY FROM
ALARM PANEL
OR DETECTOR)
Non-handed
Mounts on either head frame
or stop
n
4040SE Series track to provide
an electrically controlled holdopen function on either side of
the door
24V or 120V AC/DC input for
holding solenoid, please specify
n
Includes test switch assembly
with fuse
n
All SEH type holders require a
separate closer for fire or smoke
barrier door applications
n
n
Standard
Switch
SEH-3436
Test Switch
Installation Accessories
SEH-81
Conduit Quick-Connector
SEH-3034SE
Track Roller & Track Slider
Two piece connector for use
with 1/2˝ conduit
n
4040SEH-3210
Transformer
Quiet, low friction roller
assembly
Reduces line voltage from 120V
to 24V AC
n
n
Shoulder dimension
“X” = 1/4˝ (6 mm)
n
Mounted on cover for 4˝
(102 mm) x 4˝ x 2-1/8˝ (54 mm)
junction box (by others)
n
Alloy metal slider for use in SE
series tracks only
n
47
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
SEH
Series
Ordering Information
How-to-order SEH Series closers
Closer will be shipped with:
- Standard arm
- Standard track
- Wood & machine screw pack
Voltage
24V AC/DC
120V AC/DC
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass.
unless options listed below are selected.
Options
Finishes
Custom Powder Coat (RAL)
Screw pack
TB*, Wood & Machine Screw (TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTRX)
* Specify door thickness if other than 1-3/4˝
Installation accessories
Transformer, 4040SE-3210
Special template
ST- ________ (if required)
48
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
High Security
Series
Product selection guide
High Security LCN closers feature a vandal resistant design engineered for each application, easy
installation, and superior performance. This guide is based on the desired mounting of the closer.
EXTERIOR
DOOR
CONCEALED
IN FRAME
PUSH SIDE
MOUNTED
PULL SIDE
MOUNTED
SINGLE
LEVER ARM
PARALLEL
ARM
DOUBLE
LEVER ARM
2210
2210 DPS*
4210
4510
INTERIOR
DOOR
CONCEALED
IN FRAME
PUSH SIDE
MOUNTED
SINGLE
LEVER ARM
PARALLEL
ARM
2210
2210 DPS*
* Door position switch.
4210
PULL SIDE
MOUNTED
SINGLE
LEVER ARM
DOUBLE
LEVER ARM
SINGLE
LEVER ARM
4210T
4510
4510T
Product comparison
H
CU
S
SH
/H
(S
IN
GL
E)
ST
AN
D
ED ARD
180
180
2210DPS
180
4210
110
110
4210T
140
4510
180
4510T
AVAILABLE
NOT AVAILABLE
CU
HA
D
PL ER C
AT
O
ED AT
**ARM FUNCTION
CYLINDER
A
COVER
ND
E
NO D
NS
SI IZE
ZE
D
D
AC
CE
S
DE SIB
LA ILI
YE TY
AV D A
B*
CT
*
IO
DP *
N
S
SW
IT
CH
FINISH
(FR
AM
E)
W
PO
CE
AL
ED
CLOSER
SERIES
2210
HI
NG
E
PA (PU
LL
RA
)S
LL
ST EL A IDE
OP RM
(P
F
CO AC USH
E
)
N
MOUNTING
PL
AS
T
M IC
ET
AL
This chart shows a basic comparison of LCN High Security closers. Refer to the specific closer chapter for complete details.
Closer available with less than 5.0 lbs. opening force on 36˝ door.
** M
aximum opening with standard template. See individual closer series for degrees of opening per installation.
*** Advanced Variable Backcheck.
1
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 5/16
High Security
Closers Series
APPLICATIONS
n For any concealed or surface mounted installation subject to potential
n
n
n
abuse or vandalism.
For correctional, aluminum, hollow metal, or wood doors and frames.
Can be used with hinge or pivot mounted door.
dapter plates and other installation accessories available for unusual
A
conditions.
FEATURES COMMON TO HIGH SECURITY CLOSERS
n Each closer is a vandal resistant design for a specific mounting; hinge
side, parallel arm, stop face, or concealed.
n All high security closers are based on a cylinder certified to exceed
n
n
n
n
n
n
n
n
n
10,000,000 cycles in independent testing.
Handed for right or left swinging doors.
Closers to meet ADA reduced opening force requirements.
All closers furnished with TORX tamper resistant machine screws.
All surface mount closers include a heavy gauge steel cover with four
attachment points.
All closer adjustments are protected when installation is complete.
All track closers use a jam resistant track and tamper resistant arm/
roller assembly.
Adjustable hydraulic backcheck cushions opening swing prior to 90°.
Advanced variable backcheck (AVB) is available on all high security
closers.
Separate regulation of general closing speed and latching speed.
n
LCN offers an optional special rust inhibiting (SRI) pre-treatment.
Closers that combine the exclusive LCN powder coat finish and the
SRI pre-treatment exceed the ANSI standard for corrosion resistance
even further.
Plated finishes are available as an option to accent door and frame.
LISTINGS & APPROVALS
UL listed for self-closing doors without hold-open under “SWINGING
DOOR CLOSERS“(GVEV) file R 1943.
Tested and certified under ANSI Standard A 156.4. Consult factory for
details.
Consult factory for other listings such as; ULC, California State Fire Marshal,
Bureau of Standards and Appeals.
POSITIVE PRESSURE
LCN closers have been certified for three hours by UL to be in compliance
with UL 10 C. Contact LCN for specific details on door closer fire ratings.
FASTENERS
TORX MACHINE SCREW (TORX) pack contains tamper resistant machine
screws to install the closer. Thru Bolts for TORX machine screws are
available for all high security closers, except 2210 series.
LCN thru bolts (TB) can be installed on 1-3/4˝ thick doors with the
1/4-20 TORX screws supplied with the closer. Optional sizes are available
for 1-5/8˝ or 1-3/8˝ door thicknesses, but this must be specified when
ordering.
DESIGN ASSISTANCE
LCN has been providing reliable solutions to unique door control problems
since 1925. Design and specification assistance are only a phone call away.
Contact LCN for assistance or technical information at 877-671-7011 or FAX
800-248-1460 (order entry), Fax 815-879-1495 for Technical Support.
Note 1: For Thru Bolts, specify door thickness if other than 1-3/4˝ (44mm).
WARRANTY
High Security Series closers carry a 15 year limited warranty, except for the
2210DPS Series closer that carries a 2 year limited warranty. See General
Information Section for complete warranty details.
MATERIALS
n
n
n
n
n
n
n
n
n
High strength cast iron cylinder.
Forged steel main arms and forearms.
One piece forged steel piston.
LCN's all weather “Liquid X” fluid performs to temperature ranges
from 120°F (49°C) to -30°F (-35°C) without any seasonal adjustment.
High efficiency, full complement, low friction bearings.
Double heat treated pinions.
Tamper resistant regulating screws.
Full rack and pinion hydraulic action.
uiet, low friction track and roller combination for all single lever arm
Q
closers.
FINISHES
n Available in six standard or a wide selection of optional custom powder
n
n
Drill 25/64˝ for
steel doors
or
Drill 3/8˝
for wood doors
coat finishes to blend with door and frame.
LCN’s powder coat finishes surpass 100 hours of salt spray which is over
four times the ANSI standard for corrosion resistance.
For installations where a higher level of corrosive resistance is required,
2
Special driver bits are required for installation or removal of TORX machine
screws with a security pin as supplied with LCN High Security closers. All
bits fit a 1/4˝ hex drive socket. For 1/4-20 screws use T-27, for #12 machine
screws use T-25, for 10# machine screws use T20, for #8 (and undercut
#10) machine screws use T15, and for #6 machine screws use T10. The
specific bits required for installation are listed on the “HOW TO ORDER”
page for each closer. Sold separately.
FASTENERS
TORX MACHINE SCREW (TORX) pack contains tamper resistant machine
screws to install the closer. Thru Bolts for TORX machine screws are
available for all high security closers, except 2210 series.
SPECIFICATIONS
Refer to “SPECIFICATIONS” section for suggested architectural
specifications.
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2210
Series
Features
The concealed 2210 Series, heavy duty, high security track closer features complete
concealment with special components to minimize tampering and vandalism. Forged
steel, single lever arm and heavy steel mounting plate are designed for correctional, vandal
prone, institutional, and other high traffic applications. A choice of finishes and cylinder
functions meet correctional and vandal resistant requirements.
n
TORX machine screw pack
Mounting
n
Concealed, single acting cylinder in head
frame
n Concealed, arm and track in top rail of
door
Arms
Standard security arm and security track
Finishes/Colors/
Powder Coat
n
n
n
Fluid
All Weather Liquid X Fluid
Handing
Handed
Size
Sized, interior, exterior and vestibule 3-5
(refer to chart)
Warranty
15 years (2210); 2 years (2210DPS)
n
n
Special
Templates
Optional SRI primer - powder coat only
Optional plated finishes
n
n
COVER
PL
AS
T
M IC
ET
AL
HA
ST
AN
D
ED ARD
D
PL ER C
AT
O
ED AT
*ARM FUNCTION
CYLINDER
ND
E
NO D
NS
SI IZE
ZE
D
D
AC
CE
S
DE SIB
LA ILI
YE TY
AV D A
B*
CT
*
IO
DP
N
S
SW
IT
CH
FINISH
(FR
AM
E)
W
PO
NC
EA
LE
D
n
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
MOUNTING
HI
NG
E(
PA PUL
RA
L)
SI
LL
ST EL A DE
R
OP
M
(P
F
CO AC USH
E
)
n
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
HC
US
H
n
Fasteners
SH
/
n
Cast Iron Body
Full Complement Bearing
1-1/2˝ Diameter Piston
11/16˝ Diameter Double Heat Treated
Pinion Journal
Metal, standard
(S
IN
GL
E)
n
Cover
A
Body Construction
Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour
Salt Spray, Meets BAA - Buy American Act
CU
Certifications
180
AVAILABLE
NOT AVAILABLE
* Maximum opening with standard template.
** Advanced Variable Backcheck.
3
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 5/16
2210
Series
Mounting details
Concealed
Mounting
5-5/16"
135 mm
14-3/8"
365 mm
3-11/16"
94 mm
7/16"
11 mm
1-3/8"
35 mm
2-1/16"
52 mm
1-1/4"
32 mm
7/8"
1/2" 22 mm
13 mm
3/16"
5 mm
of Track
to of Closer
2"
51 mm
24-1/2"
622 mm
of Track
to of Closer
1-3/4"
44 mm
Butt Hinges
Should not exceed 4-1/2˝ (114 mm) in width
Auxiliary Stop
Recommended where a door cannot swing 180°
Top Rail
1-1/4˝ (32 mm) mortise required. 3/8˝ (10 mm) cutout required at top of door, stop face only
Door Thickness
1-3/4˝ (44 mm) minimum
Door Width
28˝ (711 mm) minimum
Head Frame
n
n
5-3/4˝ (146 mm) wide and 4˝ (102 mm) high with 2-3/16˝ (56 mm) rabbet required
Consult factory if any dimension is less
Steel Mounting Plate
Thickness 3/8˝ (10 mm)
Door Position Switch
n
n
n
n
n
Advanced Variable
Backcheck
Maximum Opening
n
n
n
n
n
n
Optional, newly redesigned, field adjustable switch can interface with security and monitoring systems
Add suffix “DPS” to selected cylinder
Provides normally open (N.O.) and normally closed (N.C.) circuit
A three wire connector harness with 84˝ (2134 mm), 16 AWG leads is furnished to simplify connection to field wiring
Single pole double throw (SPDT) contacts rated at 125/250 VAC at 10.1 amps maximum resistive load are standard
Cylinder starts backcheck at approximately 45° instead of the normal 75°
Add suffix “AVB” to selected cylinder (eg. 2213 DPS AVB)
Templating allows 180°
Consult factory if door will be held open at 180°
Pivot mounting door limits opening to 110° and increases minimum door width to 32˝ (813 mm). Consult factory
Please note that many track style door closers are capable of allowing 180° of door swing
Note: Track style closers are at their weakest closing force at 180°. Consult factory for applications where door must swing 180°.
Options
n
n
Advanced Variable Backcheck Cylinder
Door Position Switch
4
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2210
Series
Accessories
Cylinder
Arms
2213(4)(5)-3071
Cylinder Assembly
2210DPS-3071
Cylinder Assembly
Handed
Handed
n
n
Cast iron
n
Standard
2210-3077T
2210DPS-3077T
Standard Security Arm
n
n
Cast iron
Solid forged steel and large cross
section for potentially abusive
installations
n
Special threaded attachment of
track roller for extra security
n
n
Tracks
Roller is included with arm
when either the 2210-3077T
or 2210DPS-3077T are ordered
separately
n
ouble slab arm/pinion
D
attachment for maximum
strength
Finish Plates
2210-3038
Security Track
2210-11
Long Plate
2210DPS-3038
Non-handed
2210-12
Short Plate
Heavy gauge metal plate
n
n
Hold-open function not
available
Required for complete
enclosure
n
n
Designed to eject foreign
objects placed in track during
either opening or closing
motion
Six point TORX® mounting
screws for extra security
n
n
C an only be used with high
security track roller, 2210-3034
or 2210DPS-3034
n
Handed
n
n
Closer adjustments not
accessible with finish plates
installed
n
Requires track roller, 2210-3034
Heavy gauge metal plate
n
Required for complete
enclosure
n
Four point TORX® mounting
screws for extra security
n
Closer adjustments not
accessible with finish plates
installed
n
Installation Accessories
2210-3034
Security Track Roller
Low friction track roller threads
into 2210-3077T arm for extra
strength and security
n
n
C an not be removed without
disconnecting arm from closer
2210-493
Test Kit
Battery operated designed to
verify switch signal response
point
n
n
C an be used directly at door
location (used for 2210 DPS
only)
5
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2210
Series
Ordering Information
How-to-order 2210 Series closers
Closer will be shipped with:
- Standard cylinder
- Finish plate
- Standard security arm
- Security track roller
- Security track
- Torx machine screw pack,
Select cylinder size
2213
2213 DPS
2214
2214 DPS
2215
2215 DPS
unless options listed below are selected.
Select hand
RH
LH
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass
Closer options
Cylinder
Advanced Variable Backcheck (AVB)
Finishes
Custom Powder Coat (RAL) ___________
Plated Finish, US ___________ (cover plate and arm only)
SRI primer (excludes DPS) (use with powder _ coat finishes only)
NOTE: Installation of this closer requires T-27, T-25 and T-15 driver
bits for TORX machine screws with a security pin. Sold separately.
Special template
ST- ________
Table of sizes
n
n
n
Select closer based on width of door
2210 Series cylinders available in size 3, 4, or 5
Spring power is set at the factory for size 3, 4, or 5, but is field adjustable (may be increased 50%)
Exterior (and Vestibule) door width
Interior door width
28˝
30˝
36˝
42˝
28˝
34˝
38˝
48˝
54˝
711mm
762mm
914mm
1067mm
711mm
864mm
965mm
1219mm
1372mm
2213(DPS)
2214(DPS)
2215(DPS)
size 3
size 4
size 5
size 3
2213(DPS)
2214(DPS)
2215(DPS)
Minimum door width
size 4
Minimum door width
Indicates recommended range of door width for closer size.
6
Note: Minimum door width 28˝ (711mm).
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
size 5
4210
Series
Features
The 4210 SMOOTHEE® Series is a heavy duty, high security closer with special components
to minimize tampering and vandalism. Forged steel parallel arms and heavy gauge metal
security covers are designed for correctional, vandal prone, institutional and other high
traffic applications. The closer has passed 10 million cycles in independent testing. A choice
of finishes and cylinder functions meet correctional and vandal resistant requirements.
Certifications
Grade 1 - ANSI A156.4, UL 10C, ADA*, 100 Hour
Salt Spray, Meets BAA - Buy American Act
*4211 cylinder meets ADA
Body Construction
n
n
n
n
Cast Iron Body
Full Complement Bearing
1-1/2˝ Diameter Piston
11/16˝ Diameter Double Heat Treated
Pinion Journal
Fluid
All Weather Fluid
Handing
Handed
Size
n
n
Metal Security
Fasteners
TORX machine screw pack
Mounting
Parallel (Push Side)
Arms
Extra duty, non hold-open
Finishes/Colors/
Powder Coat
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
n
n
n
n
n
n
djustable Exterior and, Vestibule, Size 3-5
A
or size 6
Adjustable, Interior, Size 2-5; or size 6
n
Optional SRI primer - powder coat only
Optional plated finishes (cover only)
n
n
15 years
Special
Templates
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
H
HC
US
SH
/
(S
IN
GL
E)
A
CU
ST
AN
D
ED ARD
C
AL
AS
TI
ET
M
PL
D
PL ER C
AT
O
ED AT
(FR
AM
E)
W
PO
NC
EA
LE
D
*ARM FUNCTION
CYLINDER
ND
E
NO D
NS
SI IZE
ZE
D
D
AC
CE
S
DE SIB
LA ILI
YE TY
AV D A
B*
CT
*
IO
DP
N
S
SW
IT
CH
COVER
FINISH
HA
MOUNTING
HI
NG
E(
PA PUL
L)
RA
SID
LL
ST EL A E
OP RM
(P
F
CO AC USH
E
)
Warranty
Cover
180 110
AVAILABLE
NOT AVAILABLE
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening with standard template. See individual closer series for degrees of opening per installation.
** Advanced Variable Backcheck.
7
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4210
Series
Mounting details
Parallel Arm
(Push Side) Mounting
4"
102 mm
5-1/8"
130 mm
3-1/2"
89 mm
2-1/4"
57 mm
B
A
14-1/16"
357 mm
12-1/4"
311 mm
5-1/2"
140 mm
5-1/8"
130 mm
4210-18
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended where the door cannot swing 180° or where CUSH arms not used
Clearance
For EDA or CUSH is 5-1/2˝ (140 mm) from push side of door
Top Rail
Less than 5-1/8˝ (130 mm) measured from stop, requires PLATE 4210-18. Plate requires 2˝ (51 mm) minimum top rail
Stop Width
2-3/4˝ (70 mm) recommended. Less than 1˝ (25mm), consult factory
Delay Action
n
n
n
n
dvanced Variable
A
Backcheck
n
n
Add suffix “DEL” to selected cylinder (eg. 4211DEL)
Not available with 4215 or 4216 cylinder
Delays closing from maximum opening to approximately 70°
Delays time adjustable up to approximately 1 minute
Cylinder starts backcheck at approximately 45° instead of the normal 75°
Add suffix “AVB” to selected cylinder (eg. 4211 AVB)
Maximum opening
CUSH arm can be templated for
maximum opening at
EDA arm can be templated for
100°: A = 5-15/16˝ (151 mm)
B = 7-1/4˝ (184 mm)
85°:
A = 8-5/16˝ (211 mm)
B = 9-5/8˝ (244 mm)
140°: A = 4-7/16˝ (113 mm)
B = 5-3/4˝ (146 mm)
90°: A = 7-11/16˝ (195 mm)
B = 9˝ (229 mm)
180°: A = 2-15/16˝ (75 mm)
B = 4-1/4˝ (108 mm)
100°: A = 6-7/16˝ (164 mm)
B = 7-3/4˝ (197 mm)
110°: 5-9/16˝ (141 mm)
B = 6-7/8˝ (175 mm)
Hold-open point at maximum opening
with H-CUSH arm.
Options
n
Delayed Action or Advanced Variable Backcheck cylinder.
8
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4210
Series
Accessories
Cylinder
Cover
4211(6)-3071
Cylinder Assembly
4210-72MC
Metal Security Cover
n
Handed
n
n Cast iron
n
n
Handed
Four point mounting for extra
security
Standard
Closer adjustments not
accessible with cover installed
n
n
Standard
Arms
4210-3077EDA
Extra Duty Arm
Non-handed
n
n
n
4210-3049CNS
HCUSH Arm
4210-3077CNS
Cush-N-Stop® (CUSH) Arm
n
arallel arm features solid
P
forged steel main arm and
forearm for potentially abusive
installations
n
n
ouble slab arm/pinion
D
attachment for maximum
strength
Non-handed
n
arallel arm features solid forged
P
steel main arm and forearm with
built-in stop in soffit shoe
ouble slab arm/pinion
D
attachment for maximum
strength
n
Non-handed
arallel arm provides hold-open function
P
with templated stop/hold-open points
Handle controls hold-open function with
thumb turn
n
n
n
HCUSH arm not available with 4216 cylinder
ouble slab arm/pinion attachment for
D
maximum strength
Installation Accessories
Required for push side mount
where top rail is less than 5-1/8˝
(130 mm), measured from the
stop
n
n
4210-61
Blade Stop Spacer
4210-30
CUSH Shoe Support
4210-18, 4210-18CUSH
Plate
n
rovides anchorage for fifth
P
screw used with CUSH arms
where reveal is less than 3-1/16˝
(78mm)
Lowers parallel arm shoe to
clear 1/2˝ (13 mm) blade stop
n
4210-419
PA Flush Panel Adapter
n
rovides horizontal mounting
P
surface for EDA or CUSH shoe on
single rabetted or flush frame
equires 2˝ (51 mm) minimum
R
top rail measured from the stop.
Also used with CUSH arm
installations
n
9
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4210
Series
Ordering Information
How-to-order 4210 Series
Closer will be shipped with:
- Standard cylinder
- Security cover
- Standard security arm
- Torx machine screw pack,
Select cylinder size
4211 (adjustable from size 1 to 5)
4216 (DEL or HCUSH arm not available)
Select hand
RH
LH
unless options listed below are selected.
NOTE: Installation of this closer requires T-27 and T-25 driver
bits for TORX machine screws with a security pin.
Sold separately.
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass
Closer options
Cylinder
Delayed Action (DEL)
Advanced Variable Backcheck (AVB)
Screw pack
TB* and TORX Machine Screw (TBTRX)
* Specify door thickness if other than 1-3/4˝.
Finishes
Custom Powder Coat (RAL) ___________
Plated Finish, US ___________ (cover only)
SRI primer (excludes DPS) (use with powder coat
finishes only)
Installation accessories
PLATE, 4210-18
PLATE, 4210-18CUSH
Special template
ST- ________
Arms
Cush-N-Stop arm (CUSH)
HCush-N-Stop arm (HCUSH)
Table of sizes
n
n
n
n
Select closer based on width of door
The spring power of non-sized 4211 cylinder is adjustable from size 1 through size 5 and is shipped set to size 3
Sized 4210 Series cylinder available in size 6
Delayed action not available with 4216 cylinder
Exterior (and Vestibule) door width
Interior door width
28˝
30˝
36˝
42˝
48˝
28˝
34˝
38˝
48˝
54˝
60˝
711mm
762mm
914mm
1067mm
1219mm
711mm
864mm
965mm
1219mm
1372mm
1524mm
*4211
4216
size 3
size 4
size 5
size 6
size 2
*4211
4216
Minimum door width
size 3
size 4
size 5
size 6
Minimum door width
Indicates recommended range of door width for closer size.
* Adjustable Size 1 thru 5
Reduced opening force 4210 Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for information on
systems that meet reduced opening force requirements
without affecting closing power.
* Maximum opening force.
DOOR WIDTH
36˝
42˝
48˝
8.5* lbs.
4211
4211
4211
5.0* lbs.
4211
4211
4211
* Maximum opening force.
10
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4210T
Series
Features
The 4210T SMOOTHEE® Series is a heavy duty, high security track closer with special
components to minimize tampering and vandalism. Forged steel arms and heavy gauge
metal security covers are designed for correctional, vandal prone, institutional and other
high traffic interior applications. The closer has passed 10 million cycles in independent
testing. A choice of finishes and cylinder functions meet correctional and vandal resistant
requirements.
Grade 1 - ANSI A156.4, UL 10C, ADA*, 100 Hour
Salt Spray, Meets BAA - Buy American Act
*4211 meeting ADA requirements
Fluid
All Weather Fluid
Handing
Handed
Size
Interior, Sized 1, 3 or 4
Warranty
15 years
TORX machine screw pack
Mounting
Stop Face (Push Side)
Arms
Security arm, security track with roller
n
n
n
n
n
n
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
Optional SRI primer - powder coat only
Optional plated finishes
n
n
Special
Templates
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
H
HC
US
SH
/
HA
A
C
AL
(S
IN
GL
E)
ND
E
NO D
NS
SI IZE
ZE
D
D
AC
CE
S
DE SIB
LA ILI
YE TY
AV D A
B*
CT
*
IO
DP
N
S
SW
IT
CH
T
CO
A
R
ED
DE
AT
*ARM FUNCTION
CYLINDER
CU
COVER
FINISH
PL
W
PO
NC
EA
LE
D
(FR
AM
E)
MOUNTING
HI
NG
E(
PA PUL
L)
RA
SID
LL
ST EL A E
OP RM
(P
F
CO AC USH
E
)
Fasteners
n
AS
TI
n
Metal Security
Finishes/Colors/
Powder Coat
ET
n
Cast Iron Body
Full Complement Bearing
1-1/2˝ Diameter Piston
11/16˝ Diameter Double Heat Treated
Pinion Journal
M
n
PL
Body Construction
n
Cover
ST
AN
D
ED ARD
Certifications
110
AVAILABLE
NOT AVAILABLE
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening with standard template.
** Advanced Variable Backcheck.
11
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4210T
Series
Mounting details
Stop Face (Push Side)
Mounting
3"
76 mm
24-1/2"
622 mm
5-1/4"
3-1/2"
89 mm 133 mm
1-3/8"
35 mm
2-1/4"
57 mm
2-15/16"
75 mm
12-1/4"
311 mm
4210T-18
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended where the door cannot swing 110°
Clearance
2-1/4˝ (57 mm) from door
Top Rail
n
n
Stop Width
dvanced Variable
A
Backcheck
Less than 5-1/4˝ (133 mm) measured from stop, requires PLATE 4210T-18
Plate requires 2-1/4˝ (57mm) minimum measured from the stop
Minimum 1-3/8˝ (35 mm)
n
n
Cylinder starts backcheck at approximately 45° instead of the normal 75°
Add suffix “AVB” to selected cylinder (eg. 4213T AVB)
Maximum opening
Templating allows 110°
Options
Advanced Variable Backcheck cylinder
12
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
7/8"
22 mm
4210T
Series
Accessories
Cylinder
Cover
4211(3)(4)T-3071
Cylinder Assembly
4210T-3077T
Standard Security Arm
4210T-72MC
Metal Security Cover
Handed
n
Cast iron
n
For various applications see
“Table of Sizes” on 4210T Series
page 14
n
Handed
Handed
n
n
n
n
Arms
n
Four point TORX mounting for
extra security
Closer adjustments not
accessible with cover installed
Solid forged steel, large cross section arm
n
Special threaded attachment of track roller
for extra security
n
n
Standard
n
ouble slab arm/pinion attachment for
D
maximum strength
C an only be used with high security track
roller, 4210T-3034
Track
4210T-3038
Security Track
4210T-3034
Security Track Roller
Non-handed
n
Low friction track roller threads
into 4210T-3077 arm for extra
strength and security
n
Designed to eject foreign
objects placed in track during
either opening or closing
motion
n
n
C an not be removed without
disconnecting arm from closer
Requires track roller,
4210T-3034
n
Installation Accessories
4210T-18
Plate
Required where top rail, when
measured from the stop, is less
than 5-1/4˝ (133 mm)
n
n
equires 2-1/4˝ (57 mm)
R
minimum top rail measured
from the stop
13
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4210T
Series
Ordering Information
How-to-order 4210T Series
Closer will be shipped with:
- Standard cylinder
- Security cover
- Standard security arm
- Security track roller
- Security track
- Torx machine screw pack,
Select cylinder size
4211T (ADA)
4213T
4214T
Select hand
RH
LH
unless options listed below are selected.
NOTE: Installation of this closer requires T-27 and T-25
driver bits for TORX machine screws with a security pin.
Sold separately.
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass
Closer options
Cylinder
Advanced Variable Backcheck (AVB)
Installation accessories
PLATE, 4210T-18
Finishes
Custom Powder Coat (RAL) ___________
Plated Finish, US ___________
SRI primer (excludes DPS) (use with powder coat
finishes only)
Special template
ST- ________
Screw pack
TB* and TORX Machine Screw (TBTRX)
* Specify door thickness if other than 1-3/4˝.
Table of sizes
n
n
n
Select closer based on width of door
4210T series cylinders available in size 1, 3 or 4
Closing power of all 4210T Series closers may be increased 15%
Interior door width
30˝
34˝
38˝
48˝
762mm
864mm
965mm
1219mm
size 1
4211T
4213T
4214T
size 3
size 4
Minimum door width
Indicates recommended range of door width for closer size.
Note: Minimum door width 30˝ (762mm).
Reduced opening force 4210T Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for information on
systems that meet reduced opening force requirements
without affecting closing power.
* Maximum opening force.
DOOR WIDTH
36˝
42˝
48˝
8.5* lbs.
4213T
4213T
4213T
5.0* lbs.
4211T
4211T
4211T
* Maximum opening force.
14
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4510
Series
Features
The 4510 SMOOTHEE® Series is a heavy duty, high security closer with special components
to minimize tampering and vandalism. Forged steel double lever arms and heavy gauge
metal security covers are designed for correctional, vandal prone, institutional and
other high traffic applications. The closer has passed 10 million cycles in independent
testing. A choice of finishes and cylinder functions meet correctional and vandal resistant
requirements.
Grade 1 - ANSI A156.4, UL 10C, ADA*, 100 Hour
Salt Spray, Meets BAA - Buy American Act
*4511 cylinder meets ADA requirements
Finishes/Colors/
Powder Coat
n
n
All Weather Fluid
Handing
Handed
Size
Exterior and Vestibule, Adjustable Size 1-5
Interior, Adjustable Size 1-5
n
n
n
Optional SRI primer - powder coat only
Optional plated finishes
n
n
15 years
Special
Templates
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
ST
AN
D
ED ARD
C
AL
ST
I
ET
M
PL
A
D
PL ER C
AT
O
ED AT
(FR
AM
E)
PO
W
NC
EA
LE
D
*ARM FUNCTION
CYLINDER
ND
E
NO D
NS
SI IZE
ZE
D
D
AC
CE
S
DE SIB
LA ILI
YE TY
AV D A
B*
CT
*
IO
DP
N
S
SW
IT
CH
COVER
FINISH
HA
MOUNTING
HI
NG
E(
PA PUL
L)
RA
SID
LL
ST EL A E
R
OP
M
(P
F
CO AC USH
E
)
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
n
n
Fluid
Warranty
Hinge (Pull Side)
Extra heavy duty, non-hold open
US
H
n
Mounting
Arms
HC
n
TORX machine screw pack
H/
n
Cast Iron Body
Full Complement Bearing
1-1/2˝ Diameter Piston
11/16˝ Diameter Double Heat Treated
Pinion Journal
Fasteners
(S
IN
GL
E)
n
Metal Security
A
Body Construction
Cover
CU
S
Certifications
140
AVAILABLE
NOT AVAILABLE
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening with standard template.
** Advanced Variable Backcheck.
15
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4510
Series
Mounting details
Hinge (Pull Side)
Mounting
B
1"
25 mm
2-11/16"
68 mm
3-1/2"
89 mm
A
3-5/8"
92 mm
12-1/4"
311 mm
2-1/4"
57 mm
11-13/16"
300 mm
4510-18
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended where a door cannot swing 140°
Reveal
Should not exceed 1/8˝ (3 mm)
T
op Rail
n
n
Head Frame
Less than 3-1/2˝ (89 mm), requires PLATE 4510-18
Plate requires 2˝ (51mm) minimum top rail
Less than 1˝ (25 mm), consult factory
Clearance
2-1/4˝ (57 mm) behind door required for installation
Arm Clearance
Above door 1-1/8˝ (29 mm) required
Delay Action
n
n
n
n
dvanced Variable
A
Backcheck
Maximum opening
n
n
Add suffix “DEL” to selected cylinder.
Not available with 4516 cylinder.
Delays closing from maximum opening to approximately 70°.
Delay time adjustable up to approximately 1 minute.
Cylinder starts backcheck at approximately 45° instead of the normal 75°
Add suffix “AVB” to selected cylinder
Can be templated for
140°: A = 4-3/16˝ (106 mm)
B = 9-7/8˝ (251 mm)
Options
n
Delayed action or Advanced Variable Backcheck cylinder
16
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
1-1/8"
29 mm
n
009426 rev. 2/16
4510
Series
Accessories
Cylinder
Cover
4511(6)-3071
Cylinder Assembly
Arms
4510-3077EDA
Extra Duty Arm
4510-72MC
Metal Security Cover
n
Handed
n
n
Cast iron
n
n
Standard
Non-handed
Handed
n
Four point mounting for extra
security
Closer adjustments not
accessible with cover installed
n
Solid forged steel main arm and
forearm for potentially abusive
installations
n
n
Standard
n
ouble slab arm/pinion
D
attachment for maximum
strength
Standard
n
Installation Accessories
4510-18
Plate
Required where top rail is less
than 3-1/2˝ (89 mm)
n
n
equires minimum 2˝(51 mm)
R
top rail
17
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4510
Series
Ordering Information
How-to-order 4510 Series
Closer will be shipped with:
- Standard cylinder
- Security cover
- Extra duty arm
- Torx machine screw pack,
Select cylinder size
4511 (adjustable from size 1 to 5)
4516 (DEL not available)
Select hand
RH
LH
unless options listed below are selected.
NOTE: Installation of this closer requires T-27 and T-25
driver bits for TORX machine screws with a security pin.
Sold separately.
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass
Closer options
Installation accessories
PLATE, 4510-18
Cylinder
Delayed Action (DEL)
Advanced Variable Backcheck (AVB)
Special template
ST- ________
Finishes
Custom Powder Coat (RAL) ___________
Plated Finish, US ___________
SRI primer (use with powder coat finishes only)
Screw pack
TB* and TORX Machine Screw (TBTRX)
* Specify door thickness if other than 1-3/4˝.
Table of sizes
n
n
n
n
Select closer based on width of door
The spring power of non-sized 4511 cylinder is adjustable from size 1 through size 5 and is shipped set to size 3
Sized 4510 Series cylinder available in size 6
Delayed action not available with 4516 cylinder
Exterior (and Vestibule) door width
Interior door width
24˝
30˝
36˝
42˝
48˝
24˝
34˝
38˝
48˝
54˝
60˝
610mm
762mm
914mm
1067mm
1219mm
610mm
864mm
965mm
1219mm
1372mm
1524mm
*4511
4516
size 3
size 4
size 5
size 6
size 2
*4511
4516
Minimum door width
size 3
size 4
size 5
size 6
Minimum door width
Indicates recommended range of door width for closer size.
* Adjustable Size 1 thru 5
Reduced opening force 4510 Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for information on
systems that meet reduced opening force requirements
without affecting closing power.
* Maximum opening force.
DOOR WIDTH
36˝
42˝
48˝
8.5* lbs.
4511
4511
4511
5.0* lbs.
4511
4511
4511
* Maximum opening force.
18
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4510T
Series
Features
The 4510T SMOOTHEE® Series is a heavy duty, high security track closer with special
components to minimize tampering and vandalism. Forged steel single lever arm and
heavy gauge metal security cover are designed for correctional, vandal prone, institutional
and other high traffic interior applications. The closer has passed 10 million cycles in
independent testing. A choice of finishes and cylinder functions meet correctional and
vandal resistant requirements.
Grade 1 - ANSI A156.4, UL 10C, ADA*, 100 Hour
Salt Spray, Meets BAA - Buy American Act
*4511T cylinder meets ADA requirements
n
Mounting
Hinge (Pull Side)
Arms
Standard security arm, security track
(non hold-open) and track roller
Finishes/Colors/
Powder Coat
n
n
n
n
Fluid
All Weather Fluid
Handing
Handed
Size
Sized, 1, 3 or 4
Warranty
15 years
n
n
n
Optional SRI primer - powder coat only
Optional plated finishes
n
n
Special
Templates
COVER
HA
*ARM FUNCTION
CYLINDER
ST
AN
D
ED ARD
ND
E
NO D
NS
SI IZE
ZE
D
D
AC
CE
S
DE SIB
LA ILI
YE TY
AV D A
B*
CT
*
IO
DP
N
S
SW
IT
CH
D
PL ER C
AT
O
ED AT
W
PO
NC
EA
LE
D
(FR
AM
E)
FINISH
PL
AS
T
M IC
ET
AL
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
MOUNTING
HI
NG
E(
PA PUL
L)
RA
SID
LL
ST EL A E
OP RM
(P
F
CO AC USH
E
)
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
HC
US
H
n
TORX machine screw pack
SH
/
n
Cast Iron Body
Full Complement Bearing
1-1/2˝ Diameter Piston
11/16˝ Diameter Double Heat Treated
Pinion Journal
Fasteners
(S
IN
GL
E)
n
Metal Security
CU
Body Construction
Cover
A
Certifications
180
AVAILABLE
NOT AVAILABLE
Closer available with less than 5.0 lbs. opening force on 36˝ door.
* Maximum opening with standard template.
** Advanced Variable Backcheck.
19
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4510T
Series
Mounting details
Hinge (Pull Side)
Mounting
2-1/8"
54 mm
1"
25 mm
24-1/2"
622 mm
3-11/16"
94 mm
3-15/16"
100 mm
2-1/4"
57 mm
12-1/4"
311 mm
1-3/8"
35 mm
4510T-18
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended where a door cannot swing 180°
Reveal
Should not exceed 1/8˝ (3 mm)
Top Rail
n
n
Less than 3-3/4˝ (95 mm), requires PLATE 4510T-18
Plate requires 2˝ (51 mm) minimum top rail
Head Frame
Minimum 2-1/8˝ (54 mm)
Clearance
2-1/4˝ (57 mm) behind door required for installation
dvanced Variable
A
Backcheck
Maximum opening
n
n
n
n
Options
Cylinder starts backcheck at approximately 45° instead of the normal 75°
Add suffix “AVB” to selected cylinder (eg. 4513T AVB)
Templating allows 180°
Consult factory if door will be held open at 180°.
Advanced Variable Backcheck cylinder
20
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
3-1/2"
89 mm
1-5/8"
41 mm
4510T
Series
Accessories
Cylinder
Cover
4511T(3)(4)
Cylinder Assembly
Arms
4510T-3077T
Standard Security Arm
4510T-72MC
Metal Security Cover
n
Handed
n
n
Cast iron
n
n
Standard
Handed
n
Four point TORX mounting for
extra security
Closer adjustments not
accessible with cover installed
n
Handed
Solid forged steel, large cross section arm
n
Special threaded attachment of track roller
for potentially abusive installations
n
n
n
ouble slab arm/pinion attachment for
D
maximum strength
C an only be used with high security track
roller, 4510T-3034
Track
4510T-3038
Security Track
n
4510T-3034
Security Track Roller
Non-handed
Low friction track roller threads
into 4510T-3077T arm for extra
strength and security
n
Designed to eject foreign
objects placed in track during
either opening or closing
motion
n
n
C an not be removed without
disconnecting arm from closer
Requires track roller,
4510T-3034
n
Installation Accessories
4510T-18
Plate
Required where top rail is less
than 3 3/4˝ (95 mm)
n
n
equires minimum 2˝ (51 mm)
R
top rail
21
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4510T
Series
Ordering Information
How-to-order 4510T Series
Closer will be shipped with:
- Standard cylinder
- Security cover
- Standard security arm
- Security track roller
- Security track
- Torx machine screw pack,
Table of sizes
n Select closer based on width of door
n Sized 4510T Series cylinders available in size 1, 3 or 4
n Closing power of all 4510T Series closers may be increased 15%
Select cylinder size
4511T (ADA)
4513T
4514T
unless options listed below are selected.
NOTE: Installation of this closer requires T-27 and T-25
driver bits for TORX machine screws with a security pin. Sold
separately.
Select hand
RH
LH
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass
Closer options
Cylinder
Advanced Variable Backcheck (AVB)
Installation accessories
PLATE, 4510T-18
Finishes
Custom Powder Coat (RAL) ___________
Plated Finish, US ___________
SRI primer (use with powder coat finishes only)
Special template
ST- ________
Screw pack
TB* and TORX Machine Screw (TBTRX)
* Specify door thickness if other than 1-3/4˝.
Interior door width
26˝
34˝
38˝
48˝
660mm
864mm
965mm
1219mm
size 1
4511T
4513T
4514T
size 3
size 4
Minimum door width
Indicates recommended range of door width for closer size.
Note: Minimum door width 30˝ (762mm).
Reduced opening force 4510T Series closers
CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based
on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for information on
systems that meet reduced opening force requirements
without affecting closing power.
* Maximum opening force.
DOOR WIDTH
36˝
42˝
48˝
8.5* lbs.
4513T
4513T
4513T
5.0* lbs.
4511T
4511T
4511T
* Maximum opening force.
22
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Automatic
Operators
Product selection guide
LCN automatic operators are the proven standard in schools and health care facilities for over 20
years. They are easily retrofitted into existing doors and frames, as well as new construction. LCN low
energy electrohydraulic and pneumatic automatic operators feature a heavy duty closer with a slow
opening function. LCN’s electromechanical automatic operators utilizes a motor gearbox and control
box to perform the opening and closing function.
LOW ENERGY
POWERED
SYSTEMS
SURFACE MOUNTED
PULL SIDE
CONCEALED
MOUNT
2610 (PNEUMATIC)
2810 (ELECTROMECHANICAL)
2850 (ELECTROMECHANICAL)
2860 (ELECTROMECHANICAL)
4630 (ELECTROHYDRAULIC)
4810 (PNEUMATIC)
9130 (ELECTROMECHANICAL)
9530 (ELECTROMECHANICAL)
9550 (ELECTROMECHANICAL)
9560 (ELECTROMECHANICAL)
SURFACE MOUNTED
PUSH SIDE
4640 (ELECTROHYDRAULIC)
4820 (PNEUMATIC)
4840 (PNEUMATIC)
9140 (ELECTROMECHANICAL)
9150 (ELECTROMECHANICAL)
9540 (ELECTROMECHANICAL)
9550 (ELECTROMECHANICAL)
9560 (ELECTROMECHANICAL)
n
fax: 800-248-1460
n
www.allegion.com/us
9550 (ELECTROMECHANICAL)
9560 (ELECTROMECHANICAL)
1
LCN Door Control Catalog
phone: 877-671-7011
SURFACE MOUNTED
DOUBLE EGRESS
n
009426 rev. 2/16
Automatic
Operators
Product comparison
Electrohydraulic/Pneumatic Product Comparison
This chart shows a basic features comparison of the LCN electrohydraulic and pneumatic power operator systems
designed to provide easy access without sacrificing closing power. Refer to the specific closer chapter for complete details.
CYLINDER
*ARM FUNCTION
PR ST
IN OP
G
CU
SH
N-
NO
NO
N-
HA
ST
AN
DA
RD
RE
GU
(S
LA ING
EX R (D LE)
OU
TR
A
B
CU DUT LE)
SH Y
AR
M
S N-
ND
ED
SI
AC ZE
D
CE
S
PO SIB
IL
W
ER ITY
HO OP *
LD ER
AT
DP OPE OR
N
S
SW
IT
CH
COVER
PL
AS
T
M IC
ET
AL
FINISH
PO
W
D
PL ER C
AT
O
ED AT
NC AR
EA M
LE
D
OPERATOR
SERIES
2610
TO
PJ
AM
B
TO
P J (PU
AM LL S
PA B (P IDE)
RA US
H
L
S
CO LEL IDE
)
MOUNTING
4630
4630CS
4640
4640CS
4810
4820
4840
Meets ADA requirements (power mode).
* See individual series for maximum manual opening.
** Switch provided for continuous Hold Open (4630 & 4640 only).
AVAILABLE
NOT AVAILABLE
Product comparison
Electromechanical Product Comparison
This chart shows a basic features comparison of the LCN electromechanical power operator systems designed to provide easy access
without sacrificing closing power. Refer to the specific operator chapter for complete details.
2850
2860
9130
9140
9150
9530
9540
9550
9560
AVAILABLE
NOT AVAILABLE
*** All electromechanical operators open to 90º.
**** Handed for 2850 and 2860, double egress only.
2
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
ARM FUNCTION
DA
R
GU D (
LA SIN
DO R
G
UB (DO LE L
LE UB EV
OF
EG LE ER
FS
)
ET RES LEV
ER
S
CE
PI
(
PU )
NT VO
SH
T
ER
PI ARM /PU
VO
LL
T
)
AR
M
COVER
RE
RF
A
SU CE
RF MO
A
UN
SU CE
T
RF MO SI
A
UN NG
LE
CO CE
T
NC MO SIM DO
U
O
E
U
CO ALE NT I LTA R
NC D S ND NE
CO EAL ING EPE OUS
N
NC ED LE
P
DO DEN AIR
EA SI
T
LE MU OR
PA
D
IR
IN LTA
DE NE
HA
PE OU
ND
ND S
NO ED*
EN PAI
*
R
N- **
T
PA
HA
IR
ND
ED
ST
AN
DA
RD
AN
OD
M
ET
IZ
AL
ED
SU
OPERATOR
SERIES
2810
FINISH
ST
AN
HANDING
MOUNTING
www.allegion.com/us
n
009426 rev. 2/16
Automatic
Operators
WHAT IS THE ADA?
The ADA is a civil rights law, not a building code. This act is designed to
provide protection for people with disabilities. The law is divided into four
major titles that prohibit discrimination against the disabled in Employment,
Title I, Public Services and Transportation Title II, Public Accommodations
Title III, and Telecommunications Title IV. Title III concerns doors and door
controls.
WHAT IS THE INTENT OF ADA, TITLE III?
Essentially, owners of certain types of buildings must remove barriers and
provide people with disabilities with access equal to, or similar to, that
available to the general public. The deadline for compliance was January
26, 1992.
The final rules implementing Title III were published in the Federal
Register of July 26, 1991. To obtain a copy or ask questions, contact the U.S.
DEPARTMENT OF JUSTICE. Technical information can be obtained from The
U.S. ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE
BOARD.
HOW DOES ADA AFFECT DOORS?
The ADA defines an “accessible” opening which means, among other
things, providing a door with a minimum 32˝ (813 mm) clear opening, easily
manipulated handles, a maximum opening force, a minimum closing time,
and capable of opening to at least 90°.
ADA criteria, based on OPENING FORCE, are similar to American National
Standards Institute (ANSI) Standard A117.1. This is different from ANSI
Standard A156.4, which is based on CLOSING FORCE.
WHAT ARE THE OPENING FORCE LIMITS?
DOOR TYPE
OPENING FORCE
Fire Rated
Note 1
Interior Non-Fire-Rated
5.0 lbs. (22.2 N)
Exterior Non-Fire-Rated
“Reserved”
HOW IS THE DOOR MEASURED?
Two ADA criteria affect the door closer selection, adjustments, opening
force, and time to close. Since the law does not clearly define the method
of measurement, this is LCN’s recommendation.
1. On the push side of the door, locate a point at the center line of the
push plate/lock trim or 34˝ (864 mm), from the hinge edge of the door,
whichever is greater.
2. Mark the floor at a point where the push side of the doors’ latch stile is
at 70°. Mark a second point where the push side is 3˝ (76 mm) from the
latch.
3. Open the door so the latch is clear of the strike and the door is slightly
off the stop.
4. Using a force gauge on the mark determined in Step #1, push the door
open to the 70° mark established in Step #2. Observe the force readings.
(Accuracy of the readings varies with the gauge quality.)
5. Adjust the closer spring power to meet the maximum opening force.
6. Hold the door at the 70° mark. Release the door and time the closing
sweep between the two marks.
7. Adjust the closer main speed regulation valve to obtain a minimum 3
second “time to close”.
FINISHES
n A
vailable in six standard or a wide selection of optional custom
powder coat finishes to blend with door and frame.
n L
CN’s powder coat finishes surpass 100 hours of salt spray which is
over four times the ANSI standard for corrosion resistance.
n F
or installations where a higher level of corrosive resistance is
n
NOTE 1: All fire rated doors should have the minimum opening force allowable by the
appropriate administrative authority, typically the local Fire Marshal. Closing and
latching a fire door takes precedence over ADA opening force limits.
required, LCN offers an optional special rust inhibiting (SRI) pretreatment. Closers that combine the exclusive LCN powder coat finish
and the SRI pre-treatment exceed the ANSI standard for corrosion
resistance even further.
Plated finishes are available as an option to accent door and frame.
NOTE: Delayed action closers are not
necessary to meet the ADA 3 second
“time to close” requirement but do
offer additional time for people to
pass through the door.
30"
(OR)
C/L OF TRIM
CAUTION ! Any manual door closer,
including those certified by BHMA to
conform to ANSI Standard 156.4, that
is selected, installed, and adjusted
based on ADA requirements may not
provide sufficient power to reliably
close and latch a door. Auto Equalizer
systems offer an alternate solution.
WHICHEVER
IS GREATER
3
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Automatic
Operators
WHAT ARE THE CHOICES FOR ADA COMPLIANT
DOOR CONTROLS?
INFORMATION SOURCES
LCN offers both surface and concealed mountings for powered systems or
manual closers.
POWERED SYSTEMS
LCN Power Operator Systems offer easy access for the disabled and resolve
the problem of obtaining reduced opening force while providing adequate
closing force.
POWERED SYSTEMS
Manual closers rely on reduced spring power to meet opening force
requirements. Four principle factors affect the performance of manual
closers:
1. DOOR WIDTH:
A wider door provides more leverage for the user, thus reducing the
opening force required.
2. SPRING POWER:
Adjusting spring power to achieve a lower opening force also reduces the
closing force available.
3. ARM SELECTION:
The superior mechanical advantage of a regular arm system offers
the user significantly lower average opening forces through the 70°
measurement range compared to a standard arm (track type) closer.
Regular arms also provide superior latching power.
STANDARD ARM
REGULAR ARM
LCN CLOSERS
PHONE 877-671-7011
121 W. RAILROAD AVE. FAX 800-248-1460
P.O. BOX 100
www.securitiestechnologies.ingersollrand.com
PRINCETON, IL, USA 61356-0100
U.S. DEPARTMENT OF JUSTICE
The Office of the Americans with Disabilities Act, Civil Rights Div.,
P.O. Box 66118, Washington, D.C. 20035-6118
(202) 514-0301
THE U.S. ARCHITECTURAL AND TRANSPORTATION
BARRIERS COMPLIANCE BOARD
1111 18th Street N.W., Suite 501, Washington, D.C. 20036
(800) 872-2253
AMERICAN NATIONAL STANDARDS INSTITUTE
11 West 42nd Street, New York, N.Y. 10036
(212) 642-4900
- ANSI A117.1 Providing Accessibility and Usability for Physically
Handicapped People
- ANSI A156.4 for Door Controls - Closers
- ANSI A156.19 Power Assist and Low Energy Power Operated Doors
ELECTROHYDRAULIC & PNEUMATIC FASTENERS
Standard WOOD and MACHINE SCREW (WMS) pack contains phillips head
wood and machine screws to install the closer. Thru Bolts (TB) and/or
TORX® machine screws are available for all closers, except the 2610 series.
LCN thru bolts can be installed on 1-3/4˝ thick doors with either the 1/4-20
machine screws or optional TORX security screws supplied with the closer.
Optional sizes are available for 1-5/8˝ or 1-3/8˝ door thicknesses, but must
be specified when ordering.
TYPICAL ARM POWER CURVE
10
OPENING FORCE (lbs.)
EXT 9
MAX. 8
REGULAR ARM
7
INT.
MAX.
STANDARD ARM
Drill 25/64˝ for
steel doors
or
Drill 3/8˝
for wood doors
(TRACK TYPE)
6
5
4
3
2
ADA MEASUREMENT RANGE
1
NOTE 1: Phillips head, metric machine screws are available, please specify.
0
0
10
20
30
40
50
60
70
80
90
100
110
ELECTROMECHANICAL FASTENERS
DOOR OPENING ANGLE
• "RESERVED", TYPICALLY 8.6 POUNDS
4. ADDITIONAL FORCES
Improperly hung doors, stiff latches, HVAC or environmental pressures,
and other forces acting on the door require increasing the closer spring
power to reliably close and latch a door which produces a corresponding
increase in opening force.
4
Typically installed 1/4 - 20 machine screw for aluminum/steel frames.
Wood screws included for wood door mounting. Consult factory for
additional information.
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Automatic
Operators
Low Energy Operators
The basic design concept for all LCN power operator systems is door control of both the opening and closing motion of the door. Our
designs allow the system to be easily retrofitted into existing doors and frames as well as new construction. A basic LCN electrohydraulic/
pneumatic system consists of a power operator based on a heavy duty LCN 4040 Series door closer and peripheral actuators. Our
electromechanical automatic operators utilize a motor gearbox and a control box to perform the opening and closing function. LCN
offers a choice of either electrohydraulic, electromechanical or pneumatic low energy automatic operators.
APPLICATIONS
n E
lectrohydraulic and pneumatic systems are used primarily for manual
n
n
n
n
n
n
n
COMMON SYSTEM FEATURES
n
opening with available push button automatic opening.
E lectromechanical systems are used primarily for automatic openings.
F or dedicated handicap access.
Stand alone or integrated into larger multi-door systems.
Surface and concealed mountings.
Installation accessories available for unusual conditions.
AUTION ! For exterior doors exceeding 3´0˝ wide by 7´0˝ tall,
C
interior doors exceeding 4´0˝ wide by 8´0˝ tall, or any door exceeding
225 pounds, consult factory before specifying or installing LCN
electrohydraulic or pneumatic automatic operators.
AUTION ! For exterior doors exceeding 4´0˝ wide by 7´0˝ tall,
C
interior doors exceeding 4´0˝ wide by 8´0˝ tall, or any door exceeding
200 pounds, consult factory before specifying or installing LCN
Electromechanical automatic operators.
n
n
n
n
n
n
n
n
n
A156.19 SYSTEM DESIGN PARAMETERS
n
n
n
n
n
n
n
n
n
Cycle test standard of 300,000 full load operating cycles.
Power opening plus full door control.
Open to backcheck no faster than 3 seconds.
Opening time to fully open is no faster than 4 seconds.
Remain fully open for at least 5 seconds.
Closing time from 90° to 10° is no faster than 3 seconds.
Less than 15 lb to stop doors motion.
Kinetic energy must not exceed 1.25 lb-ft.
In event of failure, less than 15 lb to release latch, less than 30 lb to put
door in motion, less than 15 lb to fully open door system.
n
n
n
n
n
Power opening plus full door control.
No guide rails or safety devices required due to low energy design.
Adjustable opening force.
Adjustable closing power.
4 630 and 4810 operators meet ADA reduced manual opening force
requirements.
E lectrohydraulic and pneumatic systems feature adjustable
backcheck that slows opening swing at about 70°.
E lectromechanical systems feature electronic backcheck that slows
opening swing at about 70°.
S ystems allow for separate adjustment of general closing and latch
speed.
E lectrohydraulic and pneumatic systems are available in six standard
finishes or a wide selection of optional custom powder coat finishes
to blend with door and frame.
E lectromechanical systems are available in two standard anodized
finishes.
UL & NEC compliant.
Compatible with most security and safety systems.
C apable of full integration with high security keypads and card
readers.
iring allows for sequential operation for vestibule applications.
W
Electromechanical systems require additional components.
odular design simplifies installation and maintenance.
M
WARRANTY
n 2
year limited warranty. See General Information Section for complete
details.
MAINTENANCE
n O
perators mounted according to the LCN installation instructions
n
require no periodic maintenance or adjustments.
Periodic visual inspections are recommended.
5
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
6
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Pneumatic
Powered
Systems
PNEUMATIC (AIR) POWERED SYSTEMS
Hazardous Location Use
Since there is no high-voltage wiring at the door frame, pneumatically
powered systems are ideal for use in hazardous areas. The control
box, which contain the valves and electrical timing circuits, is remotely
located outside the hazardous area.
n Blow-Open (Smoke Evacuations Systems)
An auxiliary “blow-open” box is available and is controlled by the
building smoke evacuation system to allow fresh air into the building.
When activated, the normal pneumatic power operator functions are
not available. The 7949 Series “blowopen” box works with or without
the 7900 Series control boxes. (Limited to 50 linear foot of tubing).
n
LCN Pneumatic Auto Equalizer systems use the power of pressurized air
to do the work of automatically opening the door. These systems have
exceeded 3 million full load automatic operating cycles; that’s 10 times
the industry standard! A basic pneumatic system consists of an automatic
operator to provide the door control, a control box that contains the
valves and electrical timing circuits, actuators to start the system, and a
compressed air source.
UNIQUE FEATURES
n Multi-Door & Single-Door Solutions
The pneumatic automatic operators are ideal for multidoor
applications because the cost per door leaf decreases significantly as
the number of door leaves increase. A single control box may power up
to two pairs of doors simultaneously making it a cost-effective solution
for single or multi-door applications. This flexibility results in significant
savings in material and installation costs.
n Quiet Operation
Since the pneumatic automatic operators are powered by pressurized
air, they are quiet, efficient, and very reliable. Flexible LCN pneumatic
tubing is the only connection between the control box and the door
frame. There is no need for high-voltage wiring at the door frame since
all of the power for operation is generated by pressurized air located
away from the door frame. (Note: special fittings are available so 3/16˝
metal tubing (by others) can be used in fire rated plenums).
n Pneumatically (Air) Powered
All pneumatic automatic operators require a compressed air source.
LCN’s pneumatic systems have the flexibility to run as an independent
unit (7980 Series has a compressor built into the control box) or to
run off an existing air supply (7900 Series has connections for utilizing
existing air supply). Using a self-contained 7980 Series control box
for single or double door leaf applications eliminates the need for an
independent compressor. Existing building air compressors with a
storage tank can be used to reduce the cost of multi-door systems and
must utilize the 7900 Series control boxes.
n Easy Adjustment/Installation
The air pressure and timing cycle are easily adjustable to meet the
need of a specific installation. Because the control box can be located
anywhere within 100 linear tubing feet from the controlled door for the
7900 Series or within 50 linear tubing feet for the 7980 Series, they can
be placed in easily accessible locations. Convenient features such as
sequential operation of vestibule doors are available.
n Multiple Mounting Configurations
Available in three different mounting configurations:
- Concealed in the frame (2610 Series).
- Top Jamb Surface Mounted on the pull side of the door (4810 Series).
- Top Jamb Surface Mounted on the push side of the door
(4820 Series).
- Door Mounted, Parallel Arm on the push side of the door
(4840 Series).
STANDARDS, LISTINGS & APPROVALS
n U
L listed for self-closing doors without hold open under “SWINGING
DOOR CLOSERS (GVEV)” file R1943.
n T
ested and certified under ANSI Standard A156.19. Refer to Section 2.1
n
n
n
n
and consult factory for details.
ANSI Standard A117.1, Section 4.13.13.
ADA law, Section 4.13.12.
UL 10B and UL 10C listing.
Consult the factory for other listings
WARRANTY
n 2
year limited warranty. See General Information Section for complete
details.
STANDARDS, LISTINGS & APPROVALS
n O
perators mounted according to the LCN installation instructions
n
n
n
require no periodic maintenance or adjustments.
Periodic visual inspections are recommended.
Inspect and service filter assembly in 7900 Series control boxes as
required.
No service contracts.
7
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Typical
Pneumatic
Powered
Systems
These pages illustrate examples of typical Pneumatic LCN systems. Please consult your local SSC representative or LCN for assistance
with specific installations and material requirements.
Pneumatic
Tubing
(100' Max.)
Auto-Equalizer
Pneumatic
Tubing
(50' Max.)
Auto-Equalizer
12V DC
Wiring
Receiver
120V AC
Input
Control
Box
120V AC
Input
Interior
Actuator
Pneumatic
Tubing
(500' Max.)
Interior
Actuator
120V AC
Input
Exterior
Actuator
Exterior
Actuator
Compressor
SINGLE INTERIOR DOOR SYSTEM (WIRED)
SINGLE INTERIOR DOOR SYSTEM (WIRELESS)
Slow opening interior door leaf
System may be expanded to include an additional
simultaneous door
n No guide rails or safety devices
n
n
n
n
n
n
How It Works:
Slow opening automatic door on door leaf
Wireless actuators
Stand alone system, no planned expansion
No guide rails or safety devices
How It Works:
A person requiring assistance triggers the system using either
actuator.
n The control box supplies pressurized air to the Auto Equalizer
which opens the door slowly to 90˚, holds it for up to 30
seconds, then applies full spring power to reliably close and
latch the door
n If not actuated, the Auto Equalizer functions as a full featured
door closer
A person requiring assistance triggers the system using either
actuator
n The wireless transmitter in the actuator sends a signal to the
wireless receiver which triggers the control box
n The control box supplies pressurized air to the Auto Equalizer
which slowly swings door to 90°, holds it for up to 30 seconds,
then applies full spring power to reliably close and latch the
door.
n If not actuated, the Auto Equalizer functions as a full featured
door closer
n
Bill Of Materials:
Control
Box
Qty.
1
1
1
1
1
(as needed)
Part No.
4811
8310-856
8310-856
7901
925
n
Description
Auto Equalizer
Actuator (exterior)
Actuator (interior)
Control Box
Compressor*
Tubing
Bill Of Materials:
* Contact Technical Support to verify compressor requirements.
8
Qty.
1
2
1
1
Part No.
Description
4811
Auto Equalizer
8310-3856WS Wireless Actuator
8310-865
Wireless Receiver
7981
Control Box
(as needed)
925
Tubing
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Typical
Pneumatic
Powered
Systems
These pages illustrate examples of typical Pneumatic LCN systems. Please consult your local SSC representative or LCN for assistance
with specific installations and material requirements.
Auto-Equalizer
Pneumatic
Tubing
(100' Max.)
Auto-Equalizer
12V DC
Wiring
Pneumatic
Tubing
(50' Max.)
Receiver
120V AC
Input
Control
Box
120V AC
Input
Interior
Actuator
Pneumatic
Tubing
(500' Max.)
Interior
Actuator
120V AC
Input
Exterior
Actuator
Exterior
Actuator
Compressor
ALTERNATE VESTIBULE DOOR SYSTEM (WIRED)
VESTIBULE DOOR SYSTEM (WIRELESS)
Slow opening automatic doors with sequential operation for
exterior and vestibule pairs of doors
n No guide rails or safety devices
Slow opening automatic doors with sequential operation for
single exterior and vestibule doors
n No guide rails or safety devices
n
n
How It Works:
How It Works:
People requiring assistance press exterior actuator for entry
The exterior pair opens and after a short sequential delay the
interior pair opens
n As the system times out, first the exterior, then the interior
doors close
n Pressing the interior actuator reverses the process to exit the
building
n This allows passage through the vestibule without all doors
open for the entire cycle
n If a person stops in the vestibule and the system times out
before they exit, pressing either vestibule actuator opens the
appropriate doors
n Compressor is sized for multiple systems. Sequential
operation is not recommended with scanners or motion
sensors
n If not actuated, the Auto Equalizer functions as a full feature
door closer
People requiring assistance press exterior actuator for entry
The exterior door opens and after a short delay the interior door
opens
n When the system times out, first the exterior, then the interior
door closes
n Pressing the interior actuator reverses the process to exit the
building
n This allows passage through the vestibule without both doors
open for the entire cycle
n If a person stops in the vestibule and the system times out before
they exit, pressing either vestibule actuator opens the appropriate
door
n Sequential operation is not recommended with scanners or
motion sensors
n If not actuated, the Auto Equalizer functions as a full featured
door closer
n
n
n
n
Bill Of Materials:
Control
Box
Bill Of Materials:
Qty.
2
2
1
Part No.
Description
4822 Auto Equalizer (exterior)
4811 Auto Equalizer (interior)
7902S
Control Box with
Sequencer Card
1
Compressor*
4
8310-856
Actuator
(as needed) 925
Tubing
Qty.
Part No.
Description
1
4822 Auto Equalizer (exterior)
1
4811
Auto Equalizer (interior)
1
7982S
Control Box with
Sequencer Card
4
8310-3856WS
RF Actuators
2
8310-865
RF Receiver
(as needed)
925
Tubing
* Contact Technical Support to verify compressor requirements.
9
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
10
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2610
Series
Auto Equalizer
Features
The 2610 AUTO EQUALIZER™ is LCN’s pneumatically powered MULTI-DOOR solution. This
low-energy power operator provides easy access for people with disabilities, or the elderly.
Designed primarily for manual opening applications that occasionally require automatic
opening.
Grade 1 - ANSI A117.1, A156.19 UL228, ADA,
100 Hour Salt Spray, Meets BAA - Buy
American Act
Body Construction
Cast Iron Body
n Full Complement Bearing
n 1-1/2˝ Diameter Piston
n 11/16˝ Diameter Double Heat Treated
Pinion Journal
Fasteners
Wood and machine screws
Mounting
Concealed, in frame
Arms
Single lever arm, mounting/finish plate,
standard track
n
Fluid
All Weather Fluid
Handing
Handed
Size
Sized 3 and 4
Warranty
2 years
n
n
n
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
Optional SRI primer - powder coat only
Optional plated finishes
n
n
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
*ARM FUNCTION
ST
AN
DA
R
RE
GU D (S
IN
LA
G
EX R (D LE)
OU
TR
A
B
CU DUT LE)
SH Y
AR
M
S N-
NHA
NO
NO
M
PL
AS
TI
C
ET
AL
CO
A
R
DE
AT
PL
W
ED
D
PO
CE
A
CYLINDER
N
N- DE
D
SI
AC ZE
D
CE
S
PO SIB
I
W
ER LITY
HO OP *
LD ERA
T
DP OPE OR
N
S
SW
IT
CH
COVER
T
FINISH
LE
RM
n
n
MOUNTING
TO
PJ
AM
B
TO
P J (PU
AM LL S
PA B (P IDE)
RA US
H
L
S
CO LEL IDE
)
A
N
n
n
Special
Templates
AVAILABLE
NOT AVAILABLE
Finishes/Colors/
Powder Coat
PR ST
IN OP
G
CU
SH
Certifications
Meets ADA requirements (power mode).
* See individual series for maximum manual opening.
11
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2610
Series
Auto Equalizer
Mounting details
Concealed Mounting
2-5/16"
59 mm
21"
533 mm
1"
25 mm
3-5/8"
92 mm
1"
25 mm
3/8"
10 mm
1-1/16"
27 mm
11-5/8"
295 mm
1-1/4"
32 mm
25-1/2"
648 mm
1"
25 mm
11/16"
17 mm
of Track
to of Closer
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended
Head Frame
Minimum 4˝ (102 mm) x 4˝ for hollow metal or aluminum tube construction
Top Rail
n
n
System Diagram
Maximum opening
1-3/8"
35 mm
1-3/8˝ (35 mm) mortise required
5/16˝ (8 mm) cutout required at top of the door, push side only
See “AUTOMATIC OPERATORS” section pages 8-9 for typical system wiring, and pages 28-29 for electrical and
pneumatic data for control boxes
n
n
n
n
n
Butt hinge template allows 90° power opening and 160° manual opening
Please note that many track style door closers are capable of allowing 180° of door swing
Track style closers are at their weakest closing force at 180°
Consult factory for applications where exterior or large/heavy door must swing 180°
Consult factory for all pivot mounted installations
Notes:
• For interior or exterior doors
• Single acting cylinder in head frame
• Concealed arm and track in door top rail
• Consult factory for all pivot mounted installations.
• Multi-door solution utilizing 10,000,000 cycle heavy duty door closer
• Requires control box with integral compressor or control box using auxiliary air supply. See CONTROL BOX pages 28-29 and actuators and accessories, pages 115-131
• Guard rails/safety mats not required
12
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2610
Series
Auto Equalizer
Accessories
Cylinders
2610-3971
Cast Iron Cylinder Assembly
Handed
Handed
Handed
n
Standard
With door position switch which
sends signal when door
is closed
n
n
Standard
For various applications see
“Table of Sizes” on 2610 Series
page 14
n
n
Standard
Track
2610-3077T
Standard Arm
n
Mounting plate with door
position switch which sends
signal when door is closed
n
Standard
n
Arm
n
Mounting plate
n
2610-3071 DPS
Cast Iron Cylinder Assembly
Handed
n
n
For various applications see
“Table of Sizes” on 2610 Series
page 14
n
n
2610-3071
Cast Iron Cylinder Assembly
2610-3971 DPS
Cast Iron Cylinder Assembly
2610-3038
Standard Track
Handed
n
Track roller not included with arm
Non-handed
Will not accept hold open clip
or bumper assembly
n
n
n
Standard
Installation Accessories
2610-3034
Track Roller
Quiet, low friction roller
assembly
n
Shoulder dimension
“X” = 1/16˝ (2 mm)
n
13
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2610
Series
Ordering Information
How-to-order 2610 Series
Closer will be shipped with:
- Standard arm
- Track roller
- Standard track
- Wood & machine screw pack
Select cylinder size
2613
2613 DPS
2614
2614 DPS
unless options listed below are selected.
Select hand
RH
LH
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass
Closer options
Finishes
Custom Powder Coat (RAL)
Plated Finish, US
Screw pack
Wood & Machine Screw (WMS)
Special template
ST- ________
Table of sizes
n
n
n
Select closer based on width of door
Sized 2610 Series cylinders available in size 3 or 4
Closing power of all 2610 Series closers may be increased 15%
Exterior (and Vestibule) door width
Interior door width
30˝
36˝
30˝
38˝
48˝
762mm
914mm
762mm
965mm
1219mm
2614
size 4
size 3
2613
2614
Minimum door width
size 4
Minimum door width
Indicates recommended range of door width for closer size.
14
NOTE: Minimum door width 30˝ (762 mm).
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4810
Series
Auto Equalizer
Features
The 4810 AUTO EQUALIZER™ is LCN’s pneumatically powered MULTIDOOR solution. This
low-energy automatic operator provides easy access for people with disabilities, or the
elderly. Designed primarily for manual opening applications that occasionally require
automatic opening.
Cover
Metal, standard
Fasteners
Wood and machine screws
Mounting
Top jamb (Pull Side)
Cast Iron Body
Full Complement Bearing
n 1-1/2˝ Diameter Piston
n 3/4˝ Diameter Double Heat Treated
Pinion Journal
Arms
Single lever arm with standard track
n
n
Fluid
All Weather Fluid
Handing
Handed
Size
Adjustable Spring Size 1-4
Warranty
2 years
n
n
n
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
Optional SRI primer - powder coat only
Optional plated finishes
n
n
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
CYLINDER
CU
G
ST
OP
ST
AN
DA
R
RE
GU D (S
IN
LA
G
EX R (D LE)
OU
TR
A
B
CU DUT LE)
SH Y
AR
M
S N-
SH
*ARM FUNCTION
-H
NO AN
N- DE
D
S
AC IZE
CE D
S
PO SIB
IL
W
ER ITY
HO OP *
LD ER
AT
DP OPE OR
N
S
SW
IT
CH
NO
N
AL
IC
COVER
ET
AS
T
M
PL
W
DE
R
AT CO
ED AT
FINISH
PL
PO
R
AL M
ED
CE
n
n
MOUNTING
TO
PJ
AM
B
TO
P J (PU
AM LL S
PA B (P IDE)
RA US
H
L
S
CO LEL IDE
)
A
N
n
n
Special
Templates
AVAILABLE
NOT AVAILABLE
Finishes/Colors/
Powder Coat
IN
Body Construction
Grade 1 - ANSI A117.1, A156.19, UL 10C 228,
ADA, 100 Hour Salt Spray, Meets BAA - Buy
American Act
PR
Certifications
Meets ADA requirements (power mode).
* See individual series for maximum manual opening.
15
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4810
Series
Auto Equalizer
Mounting details
Top Jamb (Pull Side)
Mounting
2"
51 mm
3-1/2"
89 mm
20"
508 mm
3-5/16"
84 mm
4"
102 mm
1-1/4"
32 mm
2-5/8"
67 mm
22-3/4"
578 mm
1-1/16"
27 mm
4810-18
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended
Reveal
Should not exceed 1/8˝ (3 mm)
Head Frame
Minimum 2˝ (51 mm)
Top Rail
Minimum 1-1/8˝ (29 mm)
System Diagram
See “AUTOMATIC OPERATORS” section pages 7-8 for typical system wiring, and pages 28-29 for electrical and
pneumatic data for control boxes
Maximum opening
n
n
n
n
Templating allows 90° power opening and 170° manual opening
Please note that many track style door closers are capable of allowing 180° of door swing
Track style closers are at their weakest closing force at 180°
Consult factory for applications where exterior or large/heavy door must swing 180°
Notes:
• Multi-door solution utilizing 10,000,000 cycle heavy duty door closer
• Requires control box with integral compressor or control box using auxiliary air supply
• See CONTROL BOX pages 28-29 and actuators and accessories, pages 115-131
• Guard rails/safety mats not required
16
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4810
Series
Auto Equalizer
Accessories
Cylinders
4811-3971
Cast Iron Cylinder Assembly
4811-3071
Cast Iron Cylinder Assembly
n
Non-handed
n
Non-handed
n
Standard
n
Mounting plate
n
Standard
Cover
Track
4810-72MC
Metal Cover
Arm
4810-3077T
Standard Arm
4810-3038
Standard Track
n
Non-handed
n
n
With black end caps
n
n
Standard
Non-handed
n
Will not accept hold open clip
or bumper assembly
n
Non-handed
Track roller not included with
arm
n
Standard
Installation Accessories
4810-3034
Track Roller
Quiet low friction roller
assembly
n
Shoulder dimension
“X” = 1/8˝ (3mm)
n
17
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4810
Series
Auto Equalizer
Ordering Information
How-to-order 4810 Series
Closer will be shipped with:
- Standard cylinder
- Standard metal cover
- Standard arm
- Track roller
- Standard track
- Wood and machine screw pack
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass
Closer options
unless options listed below are selected.
Finishes
Custom Powder Coat (RAL)-_________
Plated Finish, US-_________
Screw pack
TB*, Wood & Machine Screw (TBWMS)
*Specify door thickness if other than 1-3/4˝
Special template
ST- ________
Table of sizes
n
n
Non-sized 4810 Series cylinder is adjustable from size 1 through size 4 and is shipped set to size 3
Closing power of 4810 Series closers may be increased 50%
Exterior (and Vestibule) door width
Interior door width
28˝
30˝
36˝
28˝
34˝
38˝
48˝
711mm
762mm
914mm
711mm
864mm
965mm
1219mm
4811
size 3
size 4
size 2
4811
Minimum door width
size 3
Minimum door width
Indicates recommended range of door width for closer size.
18
NOTE: Minimum door width 28˝ (711 mm).
LCN Door Control Catalog
phone: 877-671-7011
size 4
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4820
Series
Auto Equalizer
Features
The 4820 AUTO EQUALIZER™ is LCN’s pneumatically powered MULTI-DOOR solution.
This low-energy automatic operator provides easy access for people with disabilities, or
the elderly. Designed primarily for manual opening applications that occasionally require
automatic opening.
Body Construction
Grade 1 - ANSI A117.1, A156.19, UL 10C 228,
ADA, 100 Hour Salt Spray, Meets BAA - Buy
American Act
Cover
Metal, standard
Fasteners
Wood and machine screw
Mounting
Top Jamb (Push Side)
Cast Iron Body
Full Complement Bearing
n 1-1/2˝ Diameter Piston
n 3/4˝ Diameter Double Heat Treated
Pinion Journal
Arms
n
n
n
n
Finishes/Colors/
Powder Coat
n
n
n
n
Fluid
All Weather Fluid
Handing
Non-Handed
Size
Adjustable Spring Size 2-5
Warranty
2 years
n
n
n
Optional SRI primer - powder coat only
Optional plated finishes
*ARM FUNCTION
ST
AN
DA
R
RE
GU D (S
IN
LA
G
EX R (D LE)
TR OU
B
A
CU DU LE)
ND
SI
HA
AC
NNO
ST
IC
ET
AL
M
PL
A
CYLINDER
ED
ZE
CE D
S
PO SIB
IL
W
ER ITY
HO OP *
LD ER
AT
DP OPE OR
N
S
SW
IT
CH
COVER
N-
PO
W
D
PL ER C
AT
O
ED AT
FINISH
D
LE
NC
EA
AR
M
TO
PJ
AM
B
TO
P J (PU
AM LL S
PA B (P IDE)
RA US
H
L
S
CO LEL IDE
)
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
MOUNTING
AVAILABLE
NOT AVAILABLE
n
NO
Special
Templates
n
Regular arm, standard
Long arm, optional
SH TY
SP N-S
T
RI
NG OP
CU
SH
Certifications
Meets ADA requirements (power mode).
* See individual series for maximum manual opening.
19
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4820
Series
Auto Equalizer
Mounting details
Top Jamb (Push Side)
Mounting
2"
51 mm
20"
508 mm
2-11/16"
68 mm
12-3/8"
314 mm
3-5/16"
84 mm
12-5/32"
309 mm
2-7/8"
73 mm
3/4"
19 mm
3-1/2"
89 mm
4820-18
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended
Reveal
n
4820-18G
4-1/2˝ (114 mm) allows up to 90° power opening and 100° manual opening
8˝ (203 mm) allows up to 90° power opening and 100° manual opening with LONG ARM where standard rod and
shoe is replaced with optional LONG ROD AND SHOE, 4820-79LR
n
Head Frame
n
n
Top Rail
1-7/8"
48 mm
n
n
Minimum 1-3/4˝ (44 mm)
With flush ceiling use PLATE, 4820-18G substituted for standard plate
Minimum 1-3/4˝ (44 mm)
Closer on 4820-18G plate requires 3˝ (76 mm) minimum
System Diagram
See “AUTOMATIC OPERATORS” section pages 7-8 for typical system wiring, and pages 28-29 for electrical and
pneumatic data for control boxes
Maximum opening
Templating allows 90° power opening and 100° manual opening
Options
Door position switch (DPS) kit that signals when the door has reached the open position
Notes:
• Multi-door solution utilizing 10, 000,000 cycle heavy duty door closer
• Requires control boxes with integral compressor and control box using auxiliary air supply
• See CONTROL BOX pages 27-29 and actuators and accessories, pages 118-133
• Guard rails/safety mats not required
20
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4820
Series
Auto Equalizer
Accessories
Cylinders
4822-3971
Cast Iron Cylinder Assembly
4822-3071
Cast Iron Cylinder Assembly
n
Non-handed
n
n
Standard
n
Non-handed
Includes; 4820-18 Mounting
Plate or 4820-18G Mounting
Plate (must specify)
n
Cover
Standard
Arms
4820-72MC
Metal Cover
4820-3077
Regular Arm
4820-3077L
Long Arm
n
Non-handed
n
Non-handed
n
With black end caps
n
Standard
n
Standard
Includes LONG ROD AND SHOE,
4820-79LR for deep reveals
n
n
Optional
Installation Accessories
4820-18
Plate
4820-18G
Plate
Requires minimum 1-3/4˝
(44 mm) minimum head frame
and 2˝ (51 mm) top rail
n
n
Standard
4820-3377
Door Position Switch Kit
Requires minimum 1-3/4˝
(44 mm) minimum head frame
and 2˝ (51 mm) top rail
n
n
Standard
Provides feedback when the
door reaches the fully opened
position
n
Specifically RH or LH when
ordering
n
21
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4820
Series
Auto Equalizer
Ordering Information
How-to-order 4820 Series
Closer will be shipped with:
- Standard cylinder
- Standard metal cover
- Regular arm
- Wood and machine screw pack
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass
unless options listed below are selected.
Closer options
Installation Accessories
Plate, 4820-18
Plate, 4820-18G
Door Position Switch Kit, 4820-3377 LH
Door Position Switch Kit, 4820-3377 RH
Finishes
Custom Powder Coat (RAL)-_________
Plated Finish, US-_________
Arm
Long (LONG)
Special template
ST- ________
Screw pack
TB*, Wood & Machine Screw (TBWMS)
*Specify door thickness if other than 1-3/4˝
Table of sizes
Non-sized 4820 Series cylinder is adjustable from size 2 through size 5 and is shipped set to size 3
Closing power of 4820 Series closers may be increased 50%
n
n
Exterior (and Vestibule) door width
Interior door width
24˝
30˝
36˝
42˝
24˝
34˝
38˝
48˝
54˝
610mm
762mm
914mm
1067mm
610mm
864mm
965mm
1219mm
1372mm
4822
size 3
size 4
size 5
size 2
4822
Minimum door width
size 3
Minimum door width
Indicates recommended range of door width for closer size.
22
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
size 4
size 5
4840
Series
Auto Equalizer
Features
The 4840 AUTO EQUALIZER™ is LCN’s pneumatically powered MULTIDOOR solution.
This low-energy automatic operator provides easy access for people with disabilities, or
the elderly. Designed primarily for manual opening applications that occasionally require
automatic opening.
Certifications
Body Construction
Grade 1 - ANSI A117.1, A156.19, UL 10C 228,
ADA, 100 Hour Salt Spray, Meets BAA - Buy
American Act
Cast Iron Body
Full Complement Bearing
n 1-1/2˝ Diameter Piston
n 3/4˝ Diameter Double Heat Treated
Pinion Journal
n
Cover
Metal, standard
Fasteners
Wood and machine screws
Specify door thickness if over 1-3/4˝
Mounting
Parallel arm (Push Side)
Arms
Extra heavy duty, standard
Cush-n-stop and spring cush, optional
n
Finishes/Colors/
Powder Coat
n
n
n
n
n
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
Fluid
All Weather Fluid
Handing
Non-Handed
n
Size
Adjustable Spring Size 1-5
n
Warranty
2 years
*End caps are black
Special
Templates
AVAILABLE
NOT AVAILABLE
CYLINDER
*ARM FUNCTION
AC
Meets ADA requirements (power mode).
* See individual series for maximum manual opening.
23
LCN Door Control Catalog
phone: 877-671-7011
SH TY
SP N-S
T
RI
NG OP
CU
SH
ST
AN
DA
R
RE
GU D (S
IN
LA
G
EX R (D LE)
TR OU
B
A
CU DU LE)
ED
ZE
CE D
S
PO SIB
IL
W
ER ITY
HO OP *
LD ERA
T
DP OPE OR
N
S
SW
IT
CH
ND
SI
HA
N-
N-
NO
NO
AS
TI
C
ET
AL
COVER
M
PL
PO
W
DE
R
AT CO
ED AT
FINISH
PL
M
D
AR
LE
EA
NC
Optional SRI primer - powder coat only
Optional plated finishes*
n
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
MOUNTING
TO
PJ
AM
B
TO
P J (PU
AM LL S
PA B (P IDE)
RA US
H
L
S
CO LEL IDE
)
n
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4840
Series
Auto Equalizer
Mounting details
Parallel Arm (Push
Side) Mounting
4"
102 mm
3/4"
19 mm
3-5/16"
84 mm
5-1/2"
140 mm
2-1/2"
64 mm
20"
508 mm
7-1/2"
191 mm
3-1/2"
89 mm
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended when CUSH-N-STOP or SPRING CUSH arms are not used
Clearance
EDA or CUSH shoes is 5-1/2˝ (140 mm) from door face
Top Rail
Minimum 4-1/8˝ (105 mm). 6˝ minimum top rail for screw not to show in glass
Head Frame
(Flush) requires PA SHOE ADAPTER, 4840-419
Stop Width
Minimum 1˝ (25 mm)
Blade Stop
Clearance requires 1/2˝ (13 mm) BLADE STOP SPACER, 4840-61
System Diagram
See “AUTOMATIC OPERATORS” section pages 7-8 for typical system wiring, and pages 28-29 for electrical and
pneumatic data for control boxes
Maximum Opening
n
n
n
Maximum power opening is 90° with all arms
Maximum manual opening is 105° with EDA or SPRING CUSH arms
Maximum manual opening is 100° with CUSH-N-STOP arm
NOTE: For CUSH-N-STOP or SPRING CUSH arm installations with maximum opening less than listed above, consult factory for Special Template
Notes:
• Multi-door solution utilizing 10, 000,000 cycle heavy duty door closer
• Requires control boxes with integral compressor and control box using auxiliary air supply
• See CONTROL BOX pages 28-29 and actuators and accessories, pages 115-131
• Guard rails/safety mats not required
24
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4820
Series
Auto Equalizer
Accessories
Cylinders
Cover
4841-3971
Cast Iron Cylinder Assembly
4840-72MC
Metal Cover
4841-3071
Cast Iron Cylinder Assembly
n
Non-handed
n
Non-handed
n
Non-handed
n
Standard
n
Mounting plate
n
With black end caps
n
Standard
n
Standard
Arms
4840-3077EDA
Extra Duty Arm
n
4840-3077CNS
Cush-n-Stop Arm
Non-handed
n
Features forged solid steel main
arm and forearm for potentially
abusive installations
n
n
Standard
4840-3077SCNS
Spring CUSH Arm
Non-handed
n
Features forged solid steel
main arm and forearm with
stop in soffit shoe
n
n
Non-handed
For abusive applications
features forged solid steel main
arm and forearm with spring
loaded stop in soffit shoe
n
Optional
n
Optional
25
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4840
Series
Auto Equalizer
Accessories
Installation accessories
4840-30
CUSH Shoe Support
Provides anchorage for fifth screw
used with EDA and CUSH arms,
where reveal is less than 3-1/16˝
(78 mm)
n
4840-61
Blade Stop Spacer
4840-419
PA Flush Panel Adapter
Required to lower parallel arm
shoe to clear 1/2˝ (13 mm) blade
stop
n
n
4840-459
Door Loop Kit
rovides horizontal mounting
P
surface for parallel arm shoe on
single rabbeted or flush frame
Surface mounted, flexible metal
loop transfers pressurized air via
pneumatic tubing from frame to
closer end cap
n
Extra caps allow tubing to run on
frame surface or concealed in the
frame.
n
4840-460
Pneumatic Transfer Hinge
Transfers pressurized air via
pneumatic tubing from frame
to door leaf for fully concealed
installations
n
Preparation of a raceway is
required from the hinge stile
of the door to the top rail for
concealment of the pneumatic
tubing within the door leaf
n
26
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4820
Series
Auto Equalizer
Ordering Information
How-to-order 4840 Series closers
Closer will be shipped with:
- Standard cylinder
- Standard metal cover
- Extra duty arm
- Wood and machine screw pack
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass
unless options listed below are selected
Closer options
Finishes
Custom Powder Coat (RAL)__________________
Plated Finish, US_____________________________
Arm
CUSH-N-STOP (CUSH)
SPRING CUSH (SCUSH)
Screw pack
TB*, Wood & Machine Screw (TBWMS)
*Specify door thickness if other than 1-3/4˝.˝
Installation accessories
Cush Shoe Support, 4840-30
Blade Stop Spacer, 4840-61
PA Flush Panel Adapter, 4840-419
Door Loop Kit, 4840-459
Pneumatic Transfer Hinge, 4840-460
Special template
ST- ________
Table of sizes
n
n
Non-sized 4841 cylinder is adjustable from size 1 through size 5 and is shipped set to size 3
Closing power of 4841 closers may be increased 50%
Exterior (and Vestibule) door width
Interior door width
24˝
30˝
36˝
42˝
24˝
34˝
38˝
48˝
54˝
610mm
762mm
914mm
1067mm
610mm
864mm
965mm
1219mm
1372mm
4841
size 3
size 4
size 5
size 2
4841
Minimum door width
size 3
size 4
size 5
Minimum door width
Indicates recommended range of door width for closer size.
27
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
7900
Series
Control Boxes
CONTROL BOXES
Heavy duty, surface mounted control box contains one or two electrically controlled pneumatic circuits. Air filtration, pneumatic
regulation, and system timing is performed by the control box. 7980 Series control boxes also contain a built-in air pump to power the
system. Each pneumatic circuit can be adjusted for a hold open time up to 30 seconds. Output air pressure can be adjusted to precisely
tailor system to individual door requirements.
Pneumatic connections use standard barbed fittings and 925 tubing from the compressor to the control box to the operator. A package
of barbed tee and butt connectors are supplied with each control box to simplify installations. Consult LCN for details. Other than a
semi-annual inspection of the air filter assembly and muffler, no periodic system maintenance is required.
A
A
A
Timer
Adjust
Wheel
Timer
Adjust
Wheel
LED
*Filter
*Filter
LED
A
5 AMP
Fuse only
Air Pressure
Regulator
Knob
B
B
Earth
Ground
Earth
Ground
Air Pressure
Regulator
Knob
Air Pressure
Gauge
Air
Pressure
Gauge
Install box with two tapcon
concrete screws - 3/16" x 1-1/4".
Drill 5/32" hole 1-1/4" deep with
carbide tipped concrete bit
Manual
Override
Manual
Override
7901 AND ES7901 CONTROL BOX
7902 AND ES7902 CONTROL BOX
For single door applications or independent control of single door in
multiple door systems
n Two door leaves can be operated, if they are activated
simultaneously
n The single pneumatic circuit accepts Normally Open (N.O.) inputs
from hardwired or RF (wireless) actuator/receiver combinations
n The 7901 control box requires a separate compressor
n
P
For independent operation of two door or four door leaves, if pairs
are actuated simultaneously
n Two independent pneumatic circuits accept Normally Open
(N.O.) inputs from hardwired or RF (wireless) actuator/receiver
combinations
n Sequential operation (add suffix “S”) is available for 7902
n The 7902 control box requires a separate compressor
n
A
A
Door Open
Time Delay
Pump
“On”
Time
Air
Valve
LED
P
7981 AND ES7981 CONTROL BOX
LED
A
Self-contained control box/compressor combination for single door
leaf applications
n The single pneumatic circuit accepts Normally Open (N.O.) inputs
from hardwired or RF (wireless) actuator/receiver combinations
n The 7981 control box does not require a separate compressor
n
5 AMP Fuse Only
Earth
Ground
Regulated
Air Output
to Closer
Air Filter
Capacitor
Compressor Pump
28
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
7900
Series
Control Boxes
P
Pump
“On”
Time
Air
Valve
LED
A
B
Door
Open
Time
Delay
Door
Open
Time
Delay
LED
LED
A
B
P
7982 AND ES7982 CONTROL BOX
Self-contained control box/compressor combination for
independent or simultaneous operation of two door leaves
n Two independent pneumatic circuit accepts Normally Open
(N.O.) inputs from hardwired or RF (wireless) actuator/ receiver
combinations
n The 7982 control box does not require a separate compressor.
n Sequential operation (add suffix “S”) is available for 7982 control
boxes
n
5 AMP Fuse Only
Air
Valve
Earth
Ground
Regulated
Air Output
to Closer
Air Filter
Capacitor
Compressor Pump
A
Install box with two tapcon
concrete screws - 3/16" x 1-1/4".
Drill 5/32" hole 1-1/4" deep. Use a
carbide tipped drill if mounted on
masonary surface
7949 and Es7949 Control Box
Auxiliary “blow-open” box works with or without 7901 or 7902 and
one or two Auto Equalizers
n Controlled by smoke evacuation system, the 7949 open the door(s)
to allow fresh air into the building
n Normal Auto Equalizer functions are not available when “blowopen” box is activated
n
! DANGER
*Filter
Control Box Must
Be Connected to
Earth Ground.
Air Pressure
Regulator
Earth
Ground
Optional “ES” Boxes
120 VAC Input
Identical in function(s) to the basic box but includes an isolated
(SPDT) relay with 1 set of Normally Open (N.O.) and Normally Closed
(N.C.) contracts to control an electric strike
n The LCN control box cannot power the strike. ES7949 has two sets
of isolated (DPDT) contacts. Compressor size recommendations are
based on normal usage for the number of operations listed
n All LCN supplied auxiliary compressors include an automatic drain
feature
n
Caution:
Locate this box in areas where
the temperatures do not exceed
120°F or fall below 35°F.
Control Box Installation Notes
Locate a 7900 Series control box so no more than 100 linear feet of LCN 925 pneumatic tubing is required between the control box
and door. Maximum 50 linear feet for a 7980 and 7949 Series
n Locate a 7900/7980/7949 Series control box where the temperatures do not exceed 120°F or fall below 35°F
n 7901, 7902 and 7949 control box input 120V AC @ 1 amp. 7981 and 7982 control boxes input 120V AC @ 5 amp
n Output voltage is 12V DC @ 0.25 amp. max
n Air pressure input, 80 PSI minimum/100 PSI maximum, required for 7901, 7902 and 7949
n Regulated air output up to 80 PSI for Auto Equalizer
n Auto Equalizers require approximately 0.5 cfm airflow in heavy traffic
n All control boxes are 15˝ x 15˝ x 6˝
n
29
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
7900
Series
Control Boxes
941
Accessories
942
3299A
941
3299A
CAPACITOR
941
Accessories
941C
3299B
3299A
3299B
941
942
-329
Air Filter
3390A
3390B
3390C
Replacement inlet air filter for
7981 or 7982 Series control
boxes
n
-329G
Air Filter
-929
Filter and Seal
Replacement inlet air filter
assembly for 7901 or 7902 Series
control boxes
n
-900
Power Supply Board
Internal filter and seal
component to the Air Filter
-329G assembly
3299A
941
Main power
supply/input board
9427981, or
for the 7901, 7902,
7982 Series control boxes
n
n
3299B
3299A
3299A
941
942
941
941C
3390A
3299B
3390B
3390C
3390A
3390B
3390C
C
3299B
n
0 to 30 second timer module
Dual, 0 to 30-second sequence
timer module for 7902 and
7982 Series control boxes
n
3299A
Plugs941into the power supply
board, -900. 7901 (A slot)
Series control box requires 1
each.
3299B
n
942
Regulator valve
assembly for 7901
3390A
Series control box
n
3390B
3390C
CAPACITOR
7902 (A/B slots) and 7981
(P/A slots) Series control boxes
require942
2 each
3390A
7982 (P/A/B slots) 3390B
Series
3390C
control box requires 3 each
941C
-942
942941C
Valve Assembly
3299B
Can be added to a standard
7902 or 7982 Series control
box to convert to a sequential
942
operation.
Regulator valve 941C
assembly for
7902 Series control box
n
n
n
n
-941
Valve Assembly
-3426
Sequencer Card
-903
Timer Card
3390A
3390B 941C
3390C
Sequencer card, -3426 is
3299A
included
when ordering a
941
7902S or 7982S Series control
box
n
3299A
CAPACITOR
3299B
941
941C
CAPACITOR
-941C
Valve Assembly
Regulator valve assembly
for 7949 Series blow open
control box
n
941C
3299B
-3299B
Solenoid valve assembly
-3299A
Solenoid942
Valve Assembly
Air valve assembly for 7981 3390A
Series control box or the ‘A’ 3390B
3390C
circuit valve assembly for the
7982 Series control box
n
Air valve assembly for the
‘B’ circuit in the 7982 Series
control box
n
942
3390A
3390B
3390C
941C
30
LCN Door Control Catalog
phone: 877-671-7011
n
3390A
3390B
3390C
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
7900
Series
Control Boxes
Accessories
Accessories
3299A
941
CAPACITOR
3299B-3390B
-3390A
Relay Package “A”
-3390C
Relay Package “C”
Relay Package “B”
ES relay assembly for 7901 and
7981 Series control boxes or the ‘A’
circuit ES relay assembly in a 7902
942
or 7982 Series control boxes
n
Includes 390 relay, base, and wires
n
Can be added to standard 7901,
7902, 7981, or 7982 Series control
boxes to convert to ES operation
n
ES relay assembly for ‘B’ circuit in
7902 or 7982 Series control boxes
n
Includes –390 relay, base, and
wires
n
3390A
3390B
n
3390C Can be added to standard 7902
or 7982 Series control boxes to
convert to ES operation
Relay package, -3390B is included
when ordering a 7902ES or
7982ES Series control box
n
Relay package, -3390A is included
when ordering a 7901ES, 7902ES,
7981ES, or 7982ES Series control
941C
box
n
941in 7949 Series
ES relay assembly
blow open control box
n
-962
Isolator
3299A
Rubber Isolators for 7981/7982
compressor assembly, -3960
n
Includes –390C relay, base, and
wires
n
Can be added to standard 7949
Series blow open control box to
convert to ES operation
n
Relay package, -3390C is included
when ordering a 7949ES Series
control box
n
3299B
3299A
941
CAPACITOR
3299B
-293G
942
Muffler
3390A
3390B
3390C
Exhaust muffler for 7901, 7902,
7949, 7981, and 7982 Series
control boxes
n
942
-3960
Compressor Assembly
-3592
Compressor Service Kit
Internal air pump assembly for
7981 or 7982 Series control box
n
Includes starter capacitor, -962
Isolators, and -329 air filter
n
Internal components for
pressure release valve on
–3960 Compressor Assembly
n
941C
925
Pneumatic Tubing
3390A
1/8˝ (3mm) I.D. flexible
3390B
pneumatic tubing for use
3390C
with standard barbed
fittings
provided on pneumatic control
boxes and operators
n
Order by linear footage required
n
n
925 tubing is not fire-rated
Contact LCN for applications
where tubing must run through
rated plenums
n
941C
31
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Electrohydraulic
Powered
Systems
ELECTRIC AUTO EQUALIZERS
Electronic Circuit Protection
The high voltage input circuit is protected by a one amp slow blow fuse.
The low voltage output circuits by self-resetting fuses.
n Visual Function Indicators
LED’s allow direct observation of these inputs:
- input power
- fire alarm input
- normal trigger (actuator) input
- sequential trigger (actuator) input
- hold open/alternate action (actuator) input
- lockout timer
- safety sensor (clear) input
- safety sensor (active) input
n Programming Mode
Allows tailoring the following functions to meet specific site conditions:
- hold open time
- 90° slow down time
- one shot input [ON or OFF]
- Exterior mode [ON or OFF] function to accommodate momentary
resistance, like wind gusts, during the opening swing.
- electric strike delay timer
- electric strike 3 second power function [ON or OFF]
- sequential trigger delay timer
- alternate action timer
- lockout timer
n
These Auto Equalizer products are an addition to the original pneumatic
drive system. People moving through a door can use it as a normal rack &
pinion door closer or, at the touch of a button, open the door automatically.
An integrated digital control suite provides all electrical control functions.
These self-contained units are suitable for use on single leaf doors or pair of
doors where each leaf is equipped with an operator. The operator provides
all the control and power elements into a single operator package, only
some actuators are required to complete the system.
n Introduced in 1995.
n Two surface mount models available. The 4630 mounts on the pull side
of the door and the 4640 Series mounts on the push side of the door.
n Integrates a modified heavy-duty 4040 Series cast iron cylinder.
n 4600 Electric Operators are not approved for smoke evacuation systems.
UNIQUE FEATURES
Digital Control Box
Provides exceptionally precise control of a large range of built-in functions
combined with superior durability and performance. Visual indications
and digital readouts of all control function settings and activity make
adjustments easy, fast and accurate.
n Dual Independent Program Memories
Each unit is pre-programmed to factory default settings. The installer can
adjust the unit to meet the job site requirements. These field settings are
locked into the computer’s memory. Any subsequent field adjustments
replace the original field adjustments. The factory settings are always
retained in memory and can be recalled to replace the field settings in just
seconds, restoring the unit to it’s original programming.
n On-Board Diagnostics
Sophisticated built-in diagnostics program monitors the system
microprocessor, power supplies, drive system and actuators circuitry.
Reduces the time required to make sure the installation is complete and
correct.
n On-Board Power Supply
Provides both 12V DC and 24V DC outputs to power card readers, manual
actuators and other peripherals.
n “No Destruct” Drive System
Specially designed motor and clutch assembly provide a ‘breakaway’
function that reduces the chance the operator will be damaged in an
abusive application. If a vandal tries to force the door closed while it is
trying to open, the clutch mechanism prevents damage. The door is never
out of control because the heavy duty 4040 closer is always operable.
n
32
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Electrohydraulic
Powered
Systems
ELECTRIC AUTO EQUALIZER SYSTEMS
n
n
n
n
n
n
n
n
n
n
n
Originally introduced in 1995.
Exceeds proposed ANSI cycle test standard of 300,000 full load
automatic operating cycles. Integrated LCN 10 million cycle heavy duty
4040 door closer.
Power operation plus full door control.
For all applications, single or multi-door projects.
Opening time to backcheck no faster than 3 seconds.
Opening time 4 seconds or more to fully open.
Must remain fully open for at least 5 seconds.
Closing time from 90° to 10° no faster than 3 seconds.
Less than 15 pounds-force to stop door’s motion.
Kinetic energy must not exceed 1.25 lbf-ft.
In event of failure; less than 15 lbf. to release latch, less than 30 lbf. to put
door in motion, less than 15 lbf. to fully open door systems.
WARRANTY
n 2 year limited warranty. See General Information Section for complete
details.
MAINTENANCE
n Operators mounted according to the LCN installation instructions require
n
n
no periodic maintenance or adjustments.
Periodic visual inspections are recommended.
No service contracts.
STANDARDS, LISTINGS & APPROVALS
n UL listed for Fire Door Operator (GUJY) and Door Operator System
(+DDR) file R18222.
n Tested and certified under ANSI Standard A156.19. Refer to Section 2.1 and
consult factory for details.
ANSI Standard A117.1, Section 4.13.13.
n ADA law, Section 4.13.12.
n Listed for positive pressure plus UL 10B and UL 10C.
n Wiring is compliant with both UL 325 and the NEC. Separation of high and
low voltage.
n Consult the factory for other listings such as; State and Local Government
regulations.
n UL 10 C Listed for Fire Rated Door Operators with Automatic Closers, File
No. (GUJY).
n
33
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Electrohydraulic
Powered
Systems
Automatic
Operators
This page illustrates examples of typical Electric LCN systems. Please consult your local SSC representative or LCN for assistance with
specific installations and material requirements.
SINGLE DOOR SYSTEMS
Low Voltage Wiring
VESTIBULE ENTRY OPERATION
Low Voltage Wiring
RF Receiver
120V
Input
Auto-Equalizer
Auto-Equalizer
Auto-Equalizer
Interior
Actuator
(mounted on push side)
RF Actuator
Vestibule
Actuator
(interior door)
Electric Strike
Vestibule
Actuator
RF Actuator
SINGLE DOOR SYSTEM (WIRELESS)
n
n
n
(exterior door)
Card Reader
w/keypad as
Exterior Actuator
Note: 120V AC Input
required to both operators
VESTIBULE ENTRY SYSTEM (WIRED)
An Interior Door
No guide rails or safety devices
Free Swinging (or Dogged) Door
n
n
n
n
How It Works:
Exterior & Vestibule doors
Sequential Operation
No guide rails or safety devices
Controlled Access, Free Egress
How It Works:
Wireless RF actuators and receiver, powered by the Auto
Equalizer simplify installation and minimize installation costs
n For automatic door operation, touching either actuator signals
the receiver and controller module to open the door to 90°
n The door is held there until the system times out, then full
spring power is applied to reliably close and latch the door.
n Door opening speed and hold open time are adjustable on the
controller
n Closing power and speed are adjustable on the cylinder
assembly
n If not actuated, the Auto Equalizer functions as a full featured
door closer
n
Bill of Materials:
Qty.
Part No.
1
4631
2 8310-3856WS
1
8310-865
This installation provides both accessibility and security for
building occupants
n The Auto Equalizer controller module provides both the
power and coordination for card reader and electric strike
applications
n A built-in delay allows the strike to release before the door
begins to open
n Two interconnected Auto Equalizers provide sequential
operation in both directions
n Vestibule actuators allow single door ingress/egress from the
vestibule as needed
n
NOTE: An EL device requires a separate power supply. If not actuated, the
Auto Equalizer functions as a full featured door closer
Description
Auto Equalizer
Wireless Actuators
Wireless Receiver
34
Bill of Materials:
Qty. Part No.
Description
1
4642
Auto Equalizer (exterior)
1
4631
Auto Equalizer (interior)
3
8310-856
Wall Plate Actuators
Other products from Von Duprin and
Locknetics
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4630/4640
Electrohydraulic
Powered
Systems
4.2
4.1
3
4.3
2
4.4
1
1 - DOOR CLOSER ASSEMBLY
4.X - FIELD WIRING
Based on a heavy duty 4040, cast iron cylinder with allweather fluid for consistency and reliability
n Rugged drive mechanism provides the connection to the
electric motor assembly
n Fully adjustable, independent hydraulic regulation controls the
door to minimize the chance of damage to the door and frame
assemblies
4.1
n
Input power; 120V AC @ 1.5 amperes
On-board, low voltage power supply provides both 12V and
24V DC @ 1.0 ampere (maximum combined load) for LCN
actuators, RF receivers, and electric strikes or magnetic locks
n Slow blow and self-resetting fuses protect input and output
power from voltage spikes
n Terminal strips simplify field wiring
n
n
2 - ELECTRIC MOTOR/CLUTCH ASSEMBLY
4.2
Highly efficient motor combined with a custom designed gear
system provides exceptionally quiet and smooth operation
n Special clutch transmits the power and provides a unique
“breakaway” function that prevents damage to the operator,
door and frame if a vandal forces the door closed during the
powered opening swing
n
n
4.3
n
3 - DIGITAL CONTROLLER MODULE
n
n
n
n
n
On/Off Switch
Hold Open Switch
4.4
Digital Control Suite
Dual Independent Program Memories
On Board Diagnostics
Visual Function Indicators
Adjustable Programming Modes
Separate conduits for high voltage power and low voltage
power and signal wiring meet UL and National Electrical Code
requirements
n
35
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4630/4640
Electrohydraulic
Powered
Systems
Automatic
Operators
®
TECHNICAL SUPPORT
1-877-671-7011
www.allegion.com/us
LCN DIGITAL CONTROL BOX
Opening Speed
Adjustment
Limited to a minimum of 3 seconds to
backcheck (approx. 70°)
Opening Force
Adjustment
Maximum of 15 lb-f to stop door swing
Time Display
Displays numeric value relating to timing
adjustments (16 = approx. 5 seconds)
Mode Indicator
Indicates programming mode currently
being displayed
Up Button
Increases time or changes from OFF to ON
when programming
Down Button
Decreases time or changes from OFF to ON
when programming
Mode Button
Advances through programming setups on
Mode Indicator
Operating Indicators
Displays operating information about
internal functions and external hardware
© Allegion 2015
LCN LOW VOLTAGE (CLASS 2 NEC) ELECTRICAL CONNECTIONS
FIELD CONNECTION TERMINALS
1
MFG. DATE
Function
Actuator - Normal Input (N.O.)
Actuator - Sequential Input (N.O.)
Actuator - Alternate Action (N.O.)
Actuator - Continuous (N.O.)
Sequential Output
Stop Side Safety (N.O.)
Swing Side Safety (N.O.)
Fire Alarm Contact (N.C.)
Auxiliary Relay Contacts (5 amp max)
12/24 VDC
Fire Alarm Shunt
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
E.S. Relay Contacts (5 amp max)
12V DC & 24V DC Negative*
12V DC Positive*
24V DC Positive*
Terminal
16 & 17 or 18 & 19
8 & 19
15 & 17
6 & 17
9
19 & 20
19 & 21
13 & 14 (Fire Shunt)
10 - Common
11 - N.O.
12 - N.C.
22 - Common
23 - N.O.
24 - N.C.
2, 4, 13, 17, & 19
5&7
1&3
* NOTE: 1 Amp max load between 12V and 24V DC outputs.
36
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4630
Series
Auto Equalizer
Features
The 4630 AUTO EQUALIZER™ is LCN’s SMART & RELIABLE electrically powered low-energy
power operator. It provides easy access for people with disabilities, or the elderly. Designed
primarily for manual opening applications that occasionally required automatic opening.
Certifications
Body Construction
Grade 1 - ANSI A117.1, A156.19, UL 10C,
UL 325/228, ADA, 100 Hour Salt Spray,
Meets BAA - Buy American Act
Cover
Metal, standard
Fasteners
Wood and machine screws
Mounting
Top jamb (Pull Side)
Cast Iron Body
n Full Complement Bearing
n 1-1/2˝ Diameter Piston
n 3/4˝ Diameter Double Heat Treated
Pinion Journal
Arms
Standard single lever arm and track
n
Finishes/Colors/
Powder Coat
n
n
n
n
n
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
Fluid
All Weather Fluid
Handing
Non-Handed
n
Size
Adjustable Spring Size 1-4
n
Warranty
2 years
*End caps are black
Special
Templates
n
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
CYLINDER
AC
SH TY
SP N-S
T
RI
NG OP
CU
SH
ST
AN
DA
R
RE
GU D (S
IN
LA
G
EX R (D LE)
O
TR
U
B
A
CU DU LE)
ED
D
ZE
ND
SI
HA
N-
N-
NO
NO
AS
TI
C
ET
AL
M
PL
*ARM FUNCTION
CE
S
PO SIB
IL
W
ER ITY
O
HO
P *
LD ER
AT
DP OPE OR
N
S
SW
IT
CH
COVER
CO
R
DE
W
AT
PL
PO
ED
ED
AL
CE
FINISH
AT
RM
TO
PJ
AM
B
TO
P J (PU
AM LL S
PA B (P IDE)
RA US
H
L
S
CO LEL IDE
)
A
N
MOUNTING
AVAILABLE
NOT AVAILABLE
Optional SRI primer - powder coat only
Optional plated finishes*
n
Meets ADA requirements (power mode).
* See individual series for maximum manual opening.
** Switch provided for continuous hold open (4630 only).
37
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4630
Series
Auto Equalizer
Mounting details
Top Jamb (Pull Side)
Mounting
1-1/4"
32 mm
1-7/8"
48 mm
22-3/4"
578 mm
2-5/8"
67 mm
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended
Reveal
Should not exceed 1/8˝ (3 mm)
Head Frame
Minimum 2˝ (51 mm)
Top Rail
Minimum 1-1/8˝ (29 mm)
Opening Time and Force
n
n
33-1/2"
850 mm
4-3/8"
110 mm
4-7/8"
125 mm
1-1/16"
27 mm
Variable by adjustments to the electronic control module located on the operator assembly
Maximum hold open time adjustable up to approximately five minutes
System Diagram
See “AUTOMATIC OPERATORS” section pages 35 for typical system wiring and pages 37-38 for electrical data
Maximum Opening
n
Templating allows 90° power opening and 170° manual opening
Please note that many track style door closers are capable of allowing 180° of door swing
n Track style closers are at their weakest closing force at 180°
n
Consult factory for applications where exterior or large/heavy door must swing 180°
n
Notes:
• Actuators are sold separately, see pages 115-131
• Comes with a digital control box utilizing a 4040 heavy duty door closer with on-board diagnostics and power supply
• Has a factory default memory that include "No Destruct" drive system
• Guard rails or safety mats not required
• 4630 has easily accessible switches to provide on/off and continuous hold open functions
• CS options provides concealed on/off power switch
• Control module provides timing and sequential door functions, electric strike controls and adjustments for opening speed and force
38
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4630
Series
Auto Equalizer
Accessories
Cylinders
Cover
4631-3971
Cast Iron Cylinder Assembly
4631-3071CS
Cast Iron Cylinder Assembly
4631-3071
Cast Iron Cylinder Assembly
n
Non-handed
n
n
Standard
n
Non-handed
n
Non-handed
Mounting plate
n
Standard
Non-handed
n
Mounting plate
n
Includes 4630-3454 Motor
Clutch, 4630-3180 I/O Board
Assembly and 4630-3462
Controller
Includes 4630-3454 Motor
Clutch, 4630-3180 I/O Board
Assembly and 4630-3462
Controller
n
n
n
Same as a 4630-3071 assembly
except on/ off switch is
concealed in endcap and no
hold open switch is included
(Separate key switches
suggested)
Standard
n
n
Track
Arm
n
Non-handed
n
Will not accept hold open clip
or bumper assembly
n
n
Standard
Installation Accessories
4630-3034
Track Roller
4630-3077T
Standard Arm
4630-3038
Standard Track
Non-handed
Quiet low friction roller
assembly
n
Track roller not included
with arm
n
Shoulder dimension
“X” = 1/8˝ (3mm)
n
Standard
39
LCN Door Control Catalog
phone: 877-671-7011
4630-72MC
Metal Cover
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4630
Series
Auto Equalizer
Accessories
Installation Accessories
4630-334
Switch End Cap
End cap (black powder coat finish
only) with cut outs for installing
on/off and hold open switches
4630-334-2
Blank End Cap
Black powder coat only
n
n
4630-3179-2
Hold Open Switch Assembly
4630-3180
PC Board Assembly
Black rocker switch
n
Field wired to low voltage PC
board
n
4630-3498-2
AC Power Cable
2 wire cable to connect 120 VAC
from PC board assembly to
controller
n
4630-3179-1
On/Off Switch Assembly
4630-334CS
Switch End Cap
End cap and switch (black powder
coat only) for concealed switch
option
High and low voltage PC boards
connected to mounting bracket
n
Black rocker switch. Plugs into
high voltage PC board
n
n
4630-3454
Motor/Clutch Assembly
4630-3462
Control Box Assembly
A geared assembly in an LCN
power operator that incorporates
a “no destruct” feature
n
Digital controller with built-in
12/24 VDC power supply
n
Programming and timing
functions are adjusted on
controller
n
4630-3498-1
Ribbon Cable Connector
16 wire ribbon cable connecting
1-24 pin terminal connectors to
controller
n
40
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4630
Series
Auto Equalizer
Ordering Information
How-to-order 4630 Series closers
Closer will be shipped with:
- Standard cylinder
- Standard metal cover
- Standard arm
- Track roller
- Standard track
- Wood and machine screw pack
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass
Closer options
unless options listed below are selected
Cylinder Assembly
CS (concealed on/off switch)
(separate key switches suggested)
Finishes
Custom Powder Coat (RAL)__________________
Plated Finish, US_____________________________
Screw pack
TB*, Wood & Machine Screw (TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTRX)
*Specify door thickness if other than 1-3/4˝.
Special template
ST- ________
Table of sizes
n
n
Non-Sized 4630 series cylinder is adjustable from size 1 through size 4 and is shipped set to size 3
Closing power of 4630 Series closers may be increased 50%
Exterior (and Vestibule) door width
Interior door width
36˝
36˝
38˝
48˝
914mm
914mm
965mm
1219mm
4631
size 2
4841
Minimum door width
Minimum door width
Indicates recommended range of door width for closer size.
NOTE: Minimum door width 36˝ (914 mm).
41
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
size 3
n
www.allegion.com/us
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
42
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4640
Series
Auto Equalizer
Features
The 4640 AUTO EQUALIZER™ is LCN’s SMART & RELIABLE electrically powered low-energy
power operator. It provides easy access for people with disabilities, or the elderly. Designed
primarily for manual opening applications that occasionally require automatic opening.
Certifications
Grade 1 - ANSI A117.1, A156.19, UL 10C, ADA,
100 Hour Salt Spray, Meets BAA - Buy
American Act
Body Construction
Cast Iron Body
n Full Complement Bearing
n 1-1/2˝ Diameter Piston
n 3/4˝ Diameter Double Heat Treated
Pinion Journal
Cover
Metal, standard
Fasteners
Wood and machine screws
Mounting
Top jamb (Push Side)
Arms
n
n
n
Finishes/Colors/
Powder Coat
n
n
n
n
n
Regular arm, standard
Long arm, optional
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
Fluid
All Weather Fluid
Handing
Non-Handed
n
Size
Adjustable Spring Size 2-5
n
Warranty
2 years
*End caps are black
CYLINDER
Optional SRI primer - powder coat only
Optional plated finishes*
*ARM FUNCTION
SH TY
SP N-S
T
RI
NG OP
CU
SH
ST
AN
DA
R
RE
GU D (S
IN
LA
G
EX R (D LE)
TR OU
B
A
CU DU LE)
ND
ED
SI
AC ZE
CE D
S
PO SIB
IL
W
ER ITY
HO OP *
LD ERA
T
DP OPE OR
N
S
SW
IT
CH
HA
N-
N-
NO
NO
AL
TI
C
COVER
ET
M
W
D
PL ER C
AT
O
ED AT
FINISH
PO
CE
AL
ED
RM
TO
PJ
AM
B
TO
P J (PU
AM LL S
PA B (P IDE)
RA US
H
L
S
CO LEL IDE
)
A
N
MOUNTING
AVAILABLE
NOT AVAILABLE
n
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
PL
AS
Special
Templates
n
Meets ADA requirements (power mode).
* See individual series for maximum manual opening.
** Switch provided for continuous hold open (4640 only).
43
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4640
Series
Auto Equalizer
Mounting details
Top Jamb (Push Side)
Mounting
1-7/8"
48 mm
12-5/32"
309 mm
12-3/8"
314 mm
Standard Mount
33-1/2"
850 mm
2-11/16"
68 mm
4-3/8"
110 mm
3/4"
19 mm
1-7/8"
48 mm
Flush Ceiling Mount
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Auxiliary Stop
Recommended
Reveal
n
4-1/2˝ (114 mm) allows up to 90° power opening and 100° manual opening
8˝ (203 mm) allows up to 90° power opening and 100° manual opening with LONG ARM where standard rod and
shoe is replaced with optional LONG ROD AND SHOE, 4640-79LR
n
Head Frame
Minimum 1-3/4˝ (44 mm). The standard mounting plate is also used to meet flush ceiling conditions
Top Rail
n
n
Opening Time and Force
n
n
Minimum 1-3/4˝ (44 mm)
Flush ceiling installation requires 3-3/4˝ (95 mm) minimum
Variable by adjustments to the electronic control module located on the operator assembly
Maximum hold open time adjustable up to approximately five minutes
System Diagram
See “AUTOMATIC OPERATORS” section page 35 for typical system wiring and pages 37-38 for electrical data
Maximum Opening
n
n
Templating allows 90° power opening and 100° manual opening
Consult factory for all pivot mounted installations
Notes:
• Actuators are sold separately, see pages 115-131
• Comes with a digital control box utilizing a 4040 heavy duty door closer with on-board diagnostics and power supply
• Has a factory default memory that include "No Destruct" drive system
• Guard rails or safety mats not required
• 4030 has easily accessible switches to provide on/off and continuous hold open functions
• CS options provides concealed on/off power switch
• Control module provides timing and sequential door functions, electric strike controls and adjustments for opening speed and force.
44
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4640
Series
Auto Equalizer
Accessories
Cylinders
4642-3971
Cast Iron Cylinder Assembly
Cover
4642-3071CS
Cast Iron Cylinder Assembly
4642-3071
Cast Iron Cylinder Assembly
4640-72MC
Metal Cover
n
Non-handed
n
Non-handed
n
Non-handed
n
Non-handed
n
Standard
n
Mounting plate
n
Mounting plate.
n
Standard
Includes; 4640-3454 Motor
Clutch, 4640-3180 I/O Board
Assembly and 4640-3462
Controller
n
n
Includes; 4640-3454 Motor
Clutch, 4640-3180 I/O Board
Assembly and 4640-3462
Controller
n
Same as a 4640-3071 assembly
except on/ off switch is
concealed in endcap and no
hold open switch is included.
(Separate key switches
suggested)
Standard
n
n
Standard
Arms
4640-3077
Regular Arm
n
Non-handed
4640-3077L
Long Arm
4640-79
Rod & Shoe
Includes LONG ROD AND SHOE,
4640-79LR for deep reveals
n
n
4640-79LR
Long Rod & Shoe
For use with regular arm
45
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
Used for long arm with deep
reveals
n
n
009426 rev. 2/16
4640
Series
Auto Equalizer
Accessories
Installation Accessories
4640-334
Switch End Cap
End cap (black powder finish coat
only) with cut outs for installing
on/off and hold open switches
n
4640-3179-2
Hold Open Switch Assembly
n
Black rocker switch
ield wired to low voltage PC board
n
4640-3498-2
AC Power Cable
2 wire cable to connect 120 VAC
from PC board assembly to
controller
n
4640-334-2
Blank End Cap
n
4640-3179-1
On/Off Switch Assembly
4640-334CS
Switch End Cap
Black powder coat only
End cap and switch (black powder
coat only) for concealed switch
option
n
4640-3454
Motor/Clutch Assembly
4640-3180
PC Board Assembly
High and low voltage PC boards
connected to mounting bracket
n
n
Black rocker switch
n
Plugs into high voltage PC board
4640-3462
Control Box Assembly
A geared assembly in an LCN
power operator that incorporates
a “no destruct” feature
n
Digital controller with built-in
12/24 VDC power supply
n
Programming and timing
functions are adjusted on
controller
n
4640-3498-1
Ribbon Cable Connector
16 wire ribbon cable connecting
1-24 pin terminal connectors to
controller
n
46
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
4640
Series
Auto Equalizer
Ordering Information
How-to-order 4640 Series closers
Closer will be shipped with:
- Standard cylinder
- Standard metal cover
- Regular arm
- Wood and machine screw pack
Specify finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass
unless options listed below are selected
Closer options
Cylinder Assembly
CS (concealed on/off switch)
(separate key switches suggested)
Finishes
Custom Powder Coat (RAL)__________________
Plated Finish, US_____________________________
Arm
Long (LONG)
Screw pack
TB*, Wood & Machine Screw (TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTRX)
*Specify door thickness if other than 1-3/4˝.
Special template
ST- ________
Table of sizes
n
n
Non-sized 4640 series cylinder is adjustable from size 2 through size 5 and is shipped set to size 3
Closing power of 4640 Series closers may be increased 50%
Exterior (and Vestibule) door width
Interior door width
36˝
42˝
36˝
38˝
48˝
54˝
914mm
1067mm
914mm
965mm
1219mm
1372mm
4642
size 5
size 3
4642
Minimum door width
NOTE: Minimum door width 36˝ (914 mm).
47
LCN Door Control Catalog
phone: 877-671-7011
size 5
Minimum door width
Indicates recommended range of door width for closer size.
n
size 4
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
48
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Electromechanical
Powered
Systems
ELECTROMECHANICAL AUTOMATIC OPERATORS
LCN’s electromechanical products are designed primarily for automatic
opening applications that occasionally require manual opening. A control
box provides all electrical functions. These self-contained units are suitable
for use on single leaf doors or pair of doors. These products combine all
the control and power elements into a single operator package, only some
actuators are required to complete the system.
n Surface mounted and overhead concealed mountings available.
n Available in two standard anodized finishes – Aluminum and Dark Bronze.
n
n
n
n
n
n
n
n
UL listed for self-closing doors without hold open. UL 325.
Tested and certified under ANSI.
Low Energy Electromechanical Operators ANSI 156.19.
ADA Compliant.
Wiring is compliant with both UL 325 and the NEC. Separation of high
and low voltage.
Consult the factory for other listings.
WARRANTY
LOW ENERGY ELECTROMECHANICAL POWER
OPERATORS
n
STANDARDS, LISTINGS & APPROVALS
n 2 year limited warranty. See General Information Section for complete
details.
Complies with ANSI 156.19.
Opening time from full close to backcheck is no faster than 3 seconds.
Less than 15 lbs of force to open door manually.
MAINTENANCE
Low Energy Electromechanical Power Operators
n Operators mounted according to the LCN Installation instructions require
no periodic maintenance or adjustments.
n Periodic visual inspections are recommended.
n No service contracts.
49
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Electromechanical
Powered
Systems
This page illustrates examples of typical Electromechanical LCN systems. Please consult your local SSC representative of LCN for
assistance with specific installations and material requirements.
SINGLE DOOR SYSTEMS
VESTIBULE ENTRY OPERATION
Low Voltage Wiring
Low Voltage
Wiring
Sequencer
RF Receiver
Automatic
Operator
Automatic
Operator
120v
Input
120v
Input
Wall Plate
Actuator
Note: 120V AC Input
required to both operators
Automatic
Operator
120v
Input
Wall Plate
Actuator
Low Voltage
RF Actuator
Electric
Strike
RF Actuator
Wall Plate
Actuator
Card Reader
w/keypad as
Exterior Actuator
SINGLE DOOR SYSTEM (WIRELESS)
n
n
n
VESTIBULE ENTRY SYSTEM (WIRED)
An interior door
Guide rails or safety devices not required
Free swinging (or dogged) door
n
n
n
n
How It Works:
How It Works:
Wireless actuators with receiver, powered by the transformer
allows for easy installation
n For automatic door operation, touching either actuator signals
the receiver and power operator to open the door to 90 degrees
n The door is held there until the system times out
n Door closes via spring return
n Door opening speed, closing speed and hold open time is
adjustable on the control box
n If not actuated, the power operator functions as a manual
door
n
Bill Of Materials:
This installation provides both accessibility and security for
building occupants
n It allows for the integration of multiple automatic operators, a
card reader and electric strike
n A sequencer allows sequential operation of the two automatic
operators
n Vestibule actuators allow single door ingress/ egress from the
vestibule as needed
n If not actuated the power operator functions as a manual door
n
Bill Of Materials:
Qty. Part No.
Description
1
9531
Automatic Operator (RH)
2 8310-3853WS Wireless Actuators
1
8310-865
Wireless Receiver
50
Exterior & vestibule doors
Sequential operation
Guide rails or safety devices not required
Controlled access, free egress
Qty. Part No.
Description
1
9542 Automatic operator (RH)
1
9531
Automatic operator (RH)
3
8310-853 Wall Plate Actuators
1
8310-849
Sequencer
Other products from Von Duprin and
Schlage Electronics
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Electromechanical
Powered
Systems
CONTROL BOX - 2800, 9500 SERIES
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
Control Box, 115VAC 60Hz, or 240 VAC 50/60 Hz
Seven Segment Display
Power Indicator
Factory Default Push Button
Model Identification Label
6-Pin Connector for Master Motor
3-Pin Connector for 3 Position Switch
Breakaway Jumper Cable
2-Pin Connector for Breakaway Switch
Accessory Direct Connect Diagram
6-Pin Connector for Companion Motor (supply only w/
simultaneous pairs)
Value Adjustment Push Buttons
Setting Adjustment Menu
Function Adjustment Push Buttons
Closing Speed Adjustment Dial (Master)
Closing Speed Adjustment Dial (Companion)
3-Pin Connector for AC power
51
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Electromechanical
Powered
Systems
STANDARD CONTROL BOX - 9100 SERIES
For clarity, not all
components are shown
on the control box PC board
J8, 10-position
Control Box Power Cable
J1, 6-position
Main Power Cable
J5, 2-position
Motor Power Cable
J3, 4-position
Hall Effect Cable
Plug cables into
these receptacles
Control box
grounding stud
Black DC-
Electric Lock,
Electric Strike, etc.
24VDC 24VDC +
Red DC+
Connect
Fail Safe to N/C
Fail Secure to N/O
N.O. or N.C.
Depending on Device
Safety Sen
Safety GND
Common GND
N/O Strike Relay
N/C Strike Relay
Activation
Device
N.O.
Dry Contacts
Aux GND
Aux ACT
Red
3 Way HO
Black
3 Way GND
Green
Disabled when
optional 3 position
switch is in
Off position
Optional
3 Position
Switch
3 Way OFF
Main Act
Main Act
Activation Device
N.O. Dry Contacts
Multiple activation devices
should be connected in parallel
52
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Electromechanical
Powered
Systems
GENERAL ELECTRICAL DATA
1. The 115/240 volt power supply must be a dedicated circuit from the main
circuit breaker panel and must not be connected into a building lighting
system operating fluorescent lights.
2. Location of conduits determined by mounting. See installation
instructions for location.
2800, 9500, SERIES
Electrical Data
1. 120 VAC 60Hz input @ 2.5 amps (2800 and 9500 Series).
2. 240 VAC 50/60 Hz @ 2.5 amps (2800, and 9500 Series).
3. 24 V AC output @ 1.5 amps (protected by self-resetting thermal fuse).
4. 24 V DC available with SO kit included.
9100, SERIES
Electrical Data
1. 120 VAC input @ 1 amp.
2. 24 VDC output @ 2.5 amps.
53
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Benchmark
Unique
Features
On-Board Power Supply
Provides 24V DC output to power card readers, manual actuators and other
peripherals.
Electronic Circuit Protection
Fused input circuit protection and fused output protection for 24 VDC
peripherals.
Visual Function Indicators
There are 2 LED's for installation and trouble shooting feedback. The motor
LED will illuminate when the motor drive circuit energizes. This is when the
operator is activated it will remain on only during the opening of the door
and the power LED this will illuminate when power is applied to the board
and remains illuminated as long as there is power applied to the board.
54
Programming Mode
Allow tailoring of the following functions to meet specific site conditions:
n Power Boost
n Opening Speed
n Backcheck Speed
n Hold Open Time Delay
n Backcheck Position
n Closing Speed
n Latch Position
n Push ‘N Go
n Delayed Activation
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9130
Series
Benchmark
Features
The 9130 BENCHMARK by LCN is an electrically powered low-energy operator. It provides
easy access for people with disabilities, or the elderly. Designed primarily for automatic
opening applications that occasionally require manual opening. The BENCHMARK is a
cost-effective solution for retrofitting an activated or manual door.
Certifications
Grade 1 - A156.19, UL325, ADA, 100 Hour Salt
Spray, Meets BAA - Buy American Act
Cover
Handing
Non-Handed
Fasteners
Wood and machine screws
Door Width
n
Mounting
Single interior door, surface mount, offset
pivot / butt hinge (Pull Side)
Arms
Standard arm and track
Finishes/Colors/
Powder Coat
2 years
n
Anodized aluminum, standard
Dark bronze, optional
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
FINISH
HANDING
SU
RF
A
SU CE
RF MO
A
UN
SU CE
T
RF MO SI
AC
UN NG
LE
CO
E
T
NC MO SIM DO
U
O
E
U
CO ALE NT I LTA R
NC D S ND NE
CO EAL ING EPE OUS
N
NC ED LE
P
DO DEN AIR
EA SI
T
LE MU OR
PA
D
IR
IN LTA
N
D
HA
EP EO
ND
EN US
DE
P
NO ED
NT AIR
NPA
HA
IR
ND
ED
ST
AN
DA
RD
AN
M
OD
ET
IZ
AL
ED
MOUNTING
COVER
phone: 877-671-7011
fax: 800-248-1460
n
www.allegion.com/us
AVAILABLE
NOT AVAILABLE
55
LCN Door Control Catalog
n
ARM FUNCTION
M
Special
Templates
n
Metal 27˝, standard
Metal 36˝, optional
DA
R
GU D (
LA SIN
DO R
G
UB (DO LE
LE UB LEV
OF
EG LE ER
FS
)
ET RES LEV
ER
S
CE
PI
NT VO (PU )
SH
T
ER
/P
PI BUT
U
VO
T
HI LL)
T
NG
AR
M
E
AR
Warranty
RE
n
30˝ - 48˝
30˝ minimum door width for 27˝
36˝ door width only for full length pull
operator
n
ST
AN
n
n
n
009426 rev. 2/16
9130
Series
Benchmark
6" Min.
152 mm
From Top of Door
Opening to Ceiling
4-3/4"
121 mm
Mounting details
Pull Arm
Assembly
Top Jamb Single Door
Mounting
4-1/2"
114 mm
5/8" from
Top of Door
27" Operator
Offset
Pivot or
Butt
Hinges
Operator
Door
Frame
28-1/2" Pull Channel
Door
Offset/butt hinge, center pivot, pull, standard cover
6" Min.
152 mm
From Top of Door
Opening to Ceiling
4-3/4"
121 mm
Pull Arm
Assembly
Full Length Operator
Offset
Pivot or
Butt
Hinges
4-1/2"
114 mm
5/8" from
Top of Door
Operator
28-1/2" Pull Channel
Door
Frame
Door
Offset/butt hinge, center pivot, pull, full cover
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Reveal
Should not exceed 1/8˝ (3 mm)
Head Frame
Minimum 2˝ (51 mm)
Top Rail
Minimum 2˝ (51 mm)
Opening and Closing Time
n
n
Variable by adjustments to the electronic control module located on the operator assembly
Maximum hold open time adjustable up to approximately 30 seconds
System Diagram
See “AUTOMATIC OPERATORS” section page 51 for typical system wiring and page 53 for electrical data
Maximum Opening
Template allows 90 degree power opening and 90 degree manual opening
Notes:
• Push 'N Go permits non-switch activation with a microprocessor control box that ensures reliability and maintains customer settings
• Power boost allows for increased closing force near latch
• On/off switch is included as standard
• All potentiometers are clearly labeled with their functions
• LED lights indicate power to control box and motor gearbox
56
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9130
Series
Benchmark
Accessories
Motor Gearbox
Control Box
9130-3454S
Motor Gearbox Assembly
Driving mechanism for operator
(switch included)
n
n
For 27˝ unit
9130-3462
Control Box (120v)
9130-3454
Motor Gearbox Assembly
(W/O Switch)
n
Electronic controlling device
with power supply output
and power boost feature for
Benchmark
n
Driving mechanism for
operator (switch not included)
n
For full length 36˝ unit
Brackets
9130-3018
Mounting Bracket
Standard
n
9130-3351-2
Switch Bracket
n
41˝ cable
Bracket used to locate switch at
end of cover on full length unit
n
Covers
9130-72MC
Metal Cover
Non-handed
n
9130-72FC
Full Metal Cover
9130-163
Cover Insert
Non-handed
Used to cover operator shaft
opening (includes 2 pieces)
n
n
n
27˝
n
36˝
n
Extruded aluminum
n
Extruded aluminum
Standard
n
9130-163-1
Cover End Cap Insert
Used to cover switch hole
opening
n
9130-334
Cover End Cap
Black plastic
n
Includes 9130-163-1 cover and cap insert
n
57
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9130
Series
Benchmark
Accessories
Tracks
9130-3038
Standard Track
n
Non-handed
n
Standard
9130-3034
Roller Assembly
9130-73
Track End Cap
Black plastic
n
n
Quiet low friction
Arms
9130-3077T
Standard Arm
9130-3077PLCM
Standard Arm
n
Non-handed
n
Non-handed
n
Track roller not included
n
Standard non-handed track
58
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9130
Series
Benchmark
Ordering Information
How-to-order 9130 Series closers
Operator will be shipped with:
- Standard motor gearbox
- Standard control box
- Mounting bracket
- 27˝ metal cover
- Standard arm (3077t)
- Standard track w/track roller
- Wood and machine screw pack
Specify Finish
Standard Anodized Finish __________
Aluminum or Dark Bronze
Operator options
Cover
36˝ Full Cover
unless options listed below are selected
Table of sizes
Door width
30˝
48˝
762mm
1219mm
9131
Minimum door width
Indicates recommended range of door width for operator.
NOTE: For All Benchmark Series.
30˝ minimum door width for 27˝ pull operator.
36˝ door width only for full length pull operator.
59
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
60
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9140
Series
Benchmark
Features
The 9140 BENCHMARK by LCN is an electrically powered low-energy operator. It provides
easy access for people with disabilities, or the elderly. Designed primarily for automatic
opening applications that occasionally require manual opening. The BENCHMARK is a
cost-effective solution for retrofitting an activated or manual door.
Certifications
Grade 1 - ANSI A156.19, UL325/228, ADA,
100 Hour Salt Spray, Meets BAA - Buy
American Act
Handing
Non-Handed
Door Width
n
n
n
Warranty
26˝ - 48˝
26˝ minimum door width for 27˝
36˝ door width only for full length pull
operator
Fasteners
Wood and machine screws
Mounting
Single interior door, surface mount, offset
pivot / butt hinge (Push Side)
Arms
Regular arm
Finishes/Colors/
Powder Coat
n
n
Anodized aluminum, standard
Dark bronze, optional
2 years
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
FINISH
phone: 877-671-7011
fax: 800-248-1460
n
www.allegion.com/us
AVAILABLE
NOT AVAILABLE
61
LCN Door Control Catalog
n
ARM FUNCTION
D
RE AR
GU D (
SI
L
DO AR NG
UB (DO LE L
E
U
L
OF E E BL VER
GR E L
FS
)
ES EV
E
ER
S
CE T PI
NT VO (PU )
SH
T
ER
/P
PI BUT
UL
VO
T
L)
H
T
I
N
AR
M GE
AR
RF
A
SU CE
RF MO
A
UN
SU CE
T
RF MO SI
AC
UN NG
LE
CO
E
T
NC MO SIM DO
U
O
E
U
CO ALE NT I LTA R
NC D S ND NE
CO EAL ING EPE OUS
N
NC ED LE
P
DO DEN AIR
EA SI
T
LE MU OR
PA
D
IR
IN LTA
DE NE
HA
PE OU
ND
ND S
NO ED
EN PAI
R
NT
PA
HA
I
R
ND
ED
ST
AN
DA
RD
AN
M
OD
ET
AL
IZ
ED
SU
COVER
M
HANDING
MOUNTING
ST
AN
Special
Templates
n
009426 rev. 2/16
9140
Series
Benchmark
4-3/4"
121 mm
4-1/2"
114 mm
Mounting details
Top Jamb Single Door
Mounting
5-9/16" Min.
141 mm
18-1/4" from
Edge of Door
Offset
Pivot or
Butt Hinges
Operator
1-7/16" from
Top of Door
Pull Arm
Assembly
19-1/2" Max.
495 mm
Door
Door
Frame
27" Operator
Offset/butt hinge, center pivot, push, standard cover
4-3/4"
121 mm
4-1/2"
114 mm
18-1/4" from
Edge of Door
5-9/16" Min.
141 mm
Offset
Pivot or
ButtHinges
Operator
Push Arm
Assembly
1-7/16" from
Top of Door
19-1/2" Max.
495 mm
Door
Full Length Operator
Door
Frame
Offset/butt hinge, center pivot, push, full cover
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Reveal
Push installations should not exceed 6˝ (152 mm) for REGULAR ARM and 9-3/4˝ (248 mm) for LONG ARM
Head Frame
Minimum 2˝ (51 mm)
Top Rail
n
n
Opening and Closing Time
n
n
Minimum 2˝ (51 mm)
Flush ceiling installation requires 5-1/4˝ (133 mm) minimum
Variable by adjustments to the electronic control module located on the operator assembly
Maximum hold open time adjustable up to approximately 30 seconds
System Diagram
See “AUTOMATIC OPERATORS” section pages 54 for typical system wiring and page 55 for electrical data
Maximum Opening
Template allows 90 degree power opening and 90 degree manual opening
Notes:
• Push 'N Go permits non-switch activation with a microprocessor control box that ensures reliability and maintains customer settings
• Power boost allows for increased closing force near latch
• On/off switch is included as standard
• All potentiometers are clearly labeled with their functions
• LED lights indicate power to control box and motor gearbox
62
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9140
Series
Benchmark
Accessories
Motor Gearbox
Control Box
9140-3454S
Motor Gearbox Assembly
Driving mechanism for operator
(switch included)
n
n
For 27˝ unit
9130-3462
Control Box (120v)
9140-3454
Motor Gearbox Assembly
(W/O Switch)
Electronic controlling device
with power supply output
and power boost feature for
Benchmark
n
Driving mechanism for
operator (switch not
included)
n
n
For full length unit (36˝)
Brackets
9140-3018
Mounting bracket
n
Standard
9140-3351-1
Switch Bracket
n
29˝ cable
n
Used with a 36" door
Used to locate switch at end of
cover on full length unit
n
Covers
9140-72MC
Metal Cover
Non-handed
n
n
27˝
Extruded aluminum cover
n
9140-72FC
Full Metal Cover
9140-163
Cover Insert
Non-handed
Used to cover operator shaft
opening (includes 2 pieces)
n
n
n
36˝
Extruded aluminum cover
n
Standard
n
9140-163-1
Cover End Cap Insert
Used to cover switch hole
opening
n
9140-334
Cover End Cap
Black plastic
n
Includes 9130-163-1 cover and cap insert
n
63
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9140
Series
Benchmark
Accessories
Arms
9140-3077
Regular arm
n
Non-handed
9140-3077L
Long push arm
9140-79
Rod and shoe
Non-handed
n
n
64
9140-79LR
Long rod and shoe
For use with regular arm
Used with long arm, for deep
reveals
n
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9140
Series
Benchmark
Ordering Information
How-to-order 9140 Series closers
Operator will be shipped with:
- Standard motor gearbox
- Standard control box
- Mounting bracket
- 27˝ metal cover
- Standard arm (3077)
- Standard track w/track roller
- Wood and machine screw pack
Specify Finish
Standard Anodized Finish __________
Aluminum or Dark Bronze
Operator options
Cover
36˝ Full Cover
unless options listed below are selected
Arm
Long Arm (3077L) (reveals 6˝ to 9-3/4˝)
Table of sizes
Door width
26˝
48˝
660mm
1219mm
9142
Minimum door width
Indicates recommended range of door width for operator.
NOTE: For All Benchmark Series.
30˝ minimum door width for 27˝ pull operator.
36˝ door width only for full length pull operator.
65
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
66
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9150
Series
Benchmark
Features
The 9150 BENCHMARK by LCN is an electrically powered low-energy operator. It provides
easy access for people with disabilities, or the elderly. Designed primarily for automatic
opening applications that occasionally require manual opening. The BENCHMARK is a
cost-effective solution for retrofitting an activated or manual door.
Certifications
Grade 1 - ANSI A156.19, UL325/228 ADA,
100 Hour Salt Spray, Meets BAA - Buy
American Act
Handing
Non-Handed
Templating
Peel-n-Stick templates 2-3/8˝ x 6-3/4˝ Mounting Hole Pattern
Door Width
n
n
Warranty
inimum door width 52˝ - 96˝
M
72˝ door width only for full length double
operator
Cover
Metal, standard
Fasteners
Wood and machine screws
Mounting
Pair of doors, surface mount, offset pivot /
butt hinges (Push Side)
Arms
Regular arms
Finishes/Colors/
Powder Coat
n
n
Anodized aluminum, standard
Dark bronze, optional
2 years
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
FINISH
RE
FA
SU CE
RF MO
A
UN
SU CE
T
RF MO SI
AC
UN NG
LE
CO
E
T
NC MO SIM DO
EA UN
UL OR
T
CO LE
T
NC D S IND ANE
E
O
I
E
N
P
CO AL
G
EN US
NC ED LE
P
D
DO
EN AIR
EA SI
T
LE MU OR
P
D
AI
IN LTA
R
DE NE
HA
PE OU
ND
ND S
NO ED
EN PAI
R
NT
PA
HA
IR
ND
ED
ST
AN
DA
RD
AN
M
OD
ET
IZ
AL
ED
SU
R
COVER
phone: 877-671-7011
fax: 800-248-1460
n
www.allegion.com/us
AVAILABLE
NOT AVAILABLE
67
LCN Door Control Catalog
n
ARM FUNCTION
DA
R
GU D (
LA SIN
DO R
G
UB (DO LE
LE
U
L
OF E E BL VER
GR E L
FS
)
ES EV
E
ER
S
CE T PI
NT VO (PU )
SH
T
ER
/P
PI BUT
U
VO
T
HI LL)
T
NG
AR
M
E
AR
M
HANDING
MOUNTING
ST
AN
Special
Templates
n
009426 rev. 2/16
9150
Series
Benchmark
Mounting details
Top jamb, Independent/
Simultaneous Pair
Mounting
4-3/4"
121 mm
18-1/4" from
Edge of Door
18-1/4" from
Edge of Door
Offset
Pivot or
Butt
Hinges
4-1/2"
114 mm
Operator
1-7/16" from
Top of Door
19-1/2" Max.
495 mm
Offset
Pivot or
Butt
Hinges
Door
Push Arm
Assembly
Door
Frame
Pull Arm
Assembly
Full Length Operator
Offset pivot/butt hinge, center pivot, push
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Reveal
Push installations should not exceed 6˝ (152 mm) for REGULAR ARM and 9-3/4˝ (248 mm) for LONG ARM
Head Frame
Minimum 2˝ (51 mm)
Top Rail
n
n
Opening and Closing Time
n
n
Minimum 2˝ (51 mm)
Flush ceiling installation requires 5-1/4˝ (133 mm) minimum
Variable by adjustments to the electronic control module located on the operator assembly
Maximum hold open time adjustable up to approximately 32 seconds
System Diagram
See “AUTOMATIC OPERATORS” section pages 54 for typical system wiring and page 55 for electrical data
Maximum Opening
Template allows 90 degree power opening and 90 degree manual opening
Notes:
• Determined by wiring
• Push N' Go permits non-switch activation with a microprocessor control box that ensures reliability and maintains customer settings
• Power boost allows for increased closing force near latch
• All potentiometers clearly labeled with their functions
• LED lights indicate power to control box and motor gearbox
68
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
5-9/16" Min.
141 mm
9150
Series
Benchmark
Accessories
Motor Gearbox
Control Box
9150-3462
Control Box (120v)
9150-3454S
Motor Gearbox Assembly
Driving mechanism for operator
(switch included)
Electronic controlling device
with power supply output
and power boost feature for
Benchmark
n
n
Brackets
9150-3018
Mounting Bracket
n
Standard
Covers
9150-72MC
Metal Cover
Non-handed
n
n
72˝
9150-163-1
Cover End Cap Insert
9150-163
Cover Insert
Used to cover operator shaft
opening (includes 2 pieces)
n
Used to cover switch hole
opening
n
Extruded aluminum cover
n
9150-334
Cover End Cap
Black plastic
n
Includes 9130-163-1 cover
and cap insert
n
Standard
n
Arms
9150-3077
Regular arm
n
Non-handed
9150-3077L
Long arm
9150-79
Rod and shoe
Non-handed
n
n
9150-79LR
Long rod and shoe
For use with regular arm
69
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
Used with long arm, for deep reveals
n
n
009426 rev. 2/16
9150
Series
Benchmark
Ordering Information
How-to-order 9150 Series closers
Operator will be shipped with:
- Standard motor gearbox (2 ea)
- Standard control box (2 ea)
- Mounting bracket (2 ea)
- 72˝ metal cover
- Standard arm (2 ea)
- Wood and machine screw pack
Specify Finish
Standard Anodized Finish __________
Aluminum or Dark Bronze
Operator options
unless options listed below are selected
Arm
Long Arm (3077L) (Reveals 6˝ to 9-3/4˝)
Table of sizes
Notes:
• For 9150 Benchmark Series
• 72˝ door width only for full length push double door operator.
70
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Senior Swing
Unique
Features
Digital Control Suite
Provides exceptionally precise control of a large range of built-in functions
combined with superior durability and performance. Visual indications
and digital readouts of all control function settings and activity make
adjustments easy, fast and accurate.
Dual Independent Program Memories
Each unit is pre-programmed to factory default settings. The installer can
adjust the unit to meet the job site requirements. These field settings are
locked into the computer’s memory. Any subsequent field adjustments
replace the original field adjustments. The factory settings are always
retained in memory and can be recalled to replace the field settings in just
seconds, restoring the unit to its original programming.
On-Board Diagnostics
Sophisticated built-in diagnostics program monitors the system
microprocessor, power supplies, drive systems, actuators and safety circuits.
Reduces the time required to make sure the installation is complete and
correct.
On-Board Power Supply
Provides 24V AC output or 24V DC output with rectifier to power card
readers, manual actuators and other peripherals.
Plug and Play Sensors
Motion sensors and safety sensors feature a “plug and play” concept
allowing fast and accurate wiring connections in only seconds.
Programming Mode
Allows tailoring the following functions to meet specific site conditions
n Opening Speed
n Backcheck Speed
n Backcheck Position
n Hold Open Delay
n Latch Position
n Auto Reverse - Closing
n Electric Lock Delay
n Power Boost
n Push N’ Go
n Alternate Action
n Safety Slow/Stop
n Slow Down Disable
Push ‘N Go
Allows pedestrians to walk up to the door and push it open as if it were a
manual door. After the door is manually opened approximately 5 degrees,
the Push ‘N Go feature takes over and continues to open the door – slowly
and automatically to the full open position. With Push ‘N Go, the door
will stay fully open from one to 30 seconds, depending on the time delay
chosen.
Auto Reverse
A safety feature that reverses the direction of the door when it comes into
contact with an object during either opening or closing.
Electronic Circuit Protection
High voltage (primary AC input) is protected by replaceable fuse. Low
voltage (secondary AC output) is protected by self-resetting fuses.
Safety Slow/Stops Function
Once the door starts opening, any person or object entering the swing area
will cause the door to go into a safety slow speed. This function can be set
to allow for a short stop once a person or object is sensed.
Visual Function Indicators
LED Display allows direct observation of these inputs while in visual
function indicator mode:
n Key switch- set to Auto, OFF or HOLD
n Activate
n DMSS approach
n DMSS safety
n Bodyguard
n Power Boost Disable
Power Boost
Adds an additional latching force to ensure secure latching in severe wind
or stack conditions. Power Boost is also ideal for overcoming slowing
obstacles such as electric strikes. Provides approximately 25 lbs. of total
closing force.
Microprocessor
Control unit allows for quiet efficiency in operation. Combined with the all
electromechanical unit, it eliminates unnecessary wear and prolongs the
life of the unit.
Electric Lock Delay
Causes a 1 second delay between activate signal and door opening to allow
time for most electric locks to disengage before operator opens door.
71
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
72
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2810
Series
Senior Swing
Features
The 2810 SENIOR SWING by LCN is an ADA door operator that is a two-in-one swing
door operator. SENIOR SWING operator when activated, opens doors automatically for
wheelchair access, yet allows for manual operation for regular pedestrian traffic.
Grade 1 - ANSI A156.19, UL325, UL1998,
ADA, 100 Hour Salt Spray, Meets BAA - Buy
American Act
Handing
Handed
Door Width
Minimum door width 33˝ - 48˝ 49" with
finger guard.
Wood and machine screws
Mounting
Single door, overhead concealed, center
pivot, offset pivot, butt hinge
Arms
Center Pivot Arm or Offset Pivot Arm
Finishes/Colors/
Powder Coat
Note: Single door width per leaf 33" minimum,
48" maximum
n
n
Anodized Aluminum
Anodized Dark Bronze
2 years
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
FINISH
RF
A
SU CE
RF MO
A
UN
SU CE
T
RF MO SI
AC
UN NG
LE
CO
E
T
NC MO SIM DO
U
O
E
U
CO ALE NT I LTA R
D
N
NC
D NE
S
CO EAL ING EPE OUS
N
NC ED LE
P
DO DEN AIR
EA SI
M
T
O
LE
PA
D ULT R
IR
IN
AN
DE
HA
EO
P
ND
EN US
DE
P
NO ED
NT AIR
NPA
HA
IR
ND
ED
ST
AN
DA
RD
AN
OD
M
ET
IZ
AL
ED
SU
COVER
phone: 877-671-7011
fax: 800-248-1460
n
www.allegion.com/us
AVAILABLE
NOT AVAILABLE
73
LCN Door Control Catalog
n
ARM FUNCTION
M
HANDING
MOUNTING
DA
R
GU D (
SI
L
DO AR NG
(
UB DO LE L
E
U
L
OF E E BL VER
GR E L
FS
)
ES EV
E
ER
S
CE T PI
NT VO (PU )
SH
T
ER
/P
PI BUT
U
VO
T
HI LL)
T
NG
AR
M
E
AR
Special
Templates
RE
Warranty
Fasteners
ST
AN
Certifications
n
009426 rev. 2/16
2810
Series
Senior Swing
4-1/2"
114 mm
5-3/4"
146 mm
Emergency
Breakout
Mounting details
Swing
Operator
3-3/4"
95 mm
Concealed Single
Door Mounting
1/8"
3 MM
1"
25 mm
Breakaway
Stop
3/16"
5 mm
Breakout
Direction
Incoming
Swing
Direction
48" Door Opening (Max.)
Exterior
Center pivot, emergency breakaway, pull
Shown w/ 3-3/4˝ pivot and finger guard
4-1/2"
114 mm
5-3/4"
146 mm
Swing
Operator
Outgoing
1/8"
3 MM
3-3/4"
95 mm
1"
25 mm
Fixed
Stop
48" Door Opening (Max.)
Swing
Direction
3/16"
5 mm
Exterior
Center pivot, fixed stop, push
Shown w/ 3-3/4˝ pivot and finger guard
Head Frame
Minimum 36˝ (L) x 5-3/4˝ (H) x 4-1/2˝ (W) (914 mm x 146 mm x 114 mm)
Top Rail
Minimum 2˝ (51 mm)
Opening and Closing Time
n
n
Variable by adjustments to the electronic control box
Maximum hold open time adjustable up to approximately 32 seconds
Door Stop
Required for each door panel
System Diagram
See “AUTOMATIC OPERATORS” section page 51 for typical system wiring and page 53 for electrical data
Maximum Opening
Template allows 90 degree power opening and 90 degree manual opening
n
Minimum header length 33˝ with applied stop by others and 36˝ with LCN fixed or breakaway stop
Notes:
• Push N' Go permits non-switch activation
• Power boost provides additional latch forcing for electromechanical unit with microprocessor control
• Double door header available up to 98˝, specify length 49˝ to 98˝ maximum (Consult factory regarding this option)
• Fixed (positive) or breakaway stop available with center pivot arm
• Adjustable hold open time of 1-32 seconds
74
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 5/16
2810
Series
Senior Swing
Mounting details
Concealed Single
Door Mounting
4-1/2"
114 mm
Exterior
5-3/4"
146 mm
Outgoing
Swing
Operator
Slide Arm
Assembly
Slide Arm Assembly
with Slide Block
Offset
Pivot or
Butt
Hinges
1/8"
3 mm
Concealing
Channel
11" Slide Channel
Swing
Direction
3-3/4"
95 mm
10-1/2"
257 mm
Concealing Channel
Door
Door
Frame
Offset pivot or butt hinge, slide arm, push
Shown w/ 3-3/4˝ pivot
Head Frame
Minimum 33˝ (L) x 5-3/4˝ (H) x 4-1/2˝ (W) (838 mm x 146 mm x 114 mm)
Top Rail
Minimum 2˝ (51 mm)
Opening and Closing Time
n
n
Variable by adjustments to the electronic control box
Maximum hold open time adjustable up to approximately 32 seconds
Door Stop
Required for each door panel
System Diagram
See “AUTOMATIC OPERATORS” section page 51 for typical system wiring and page 53 for electrical data
Maximum Opening
Template allows 90 degree power opening and 90 degree manual opening
n
n
Minimum header length 33˝
Installations require bottom pivot and two intermediate pivots
Notes:
• Push N' Go permits non-switch activation
• Power boost provides additional latch forcing for electromechanical unit with microprocessor control
• Double door header available up to 98˝, specify length 49˝ to 98˝ maximum (Consult factory regarding this option)
• Fixed (positive) or breakaway stop available with center pivot arm
• Adjustable hold open time of 1-32 seconds
75
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 5/16
2810
Series
Senior Swing
Accessories
Motor Gearbox
Mount Brackets
2810-375
Mounting Bracket
2810-3454
Motor Gearbox
n
Senior swing
n
Handed
n
Driving mechanism for operator
Motor gearbox mounting
bracket for 3-3/4˝ offset pivot,
butt hinge or center pivot with
finger guard installations
n
Provides maximum 15 lbs
opening force
n
Control Box
n
Motor gearbox mounting
bracket for 2-3/4˝ center pivot
installations
n
n
Electronic controlling device for
Senior Swing
n
Rear bracket
End Cap
2810-3572DD
Header
2810-334
Header End Caps
n
Standard
n
Standard
n
Single door, single operator
n
Double door, single operator
pecify length 33˝ to 49˝
S
maximum
n
n
n
Front bracket
2810-3572HL
Header
Senior swing
Motor gearbox mounting
bracket
n
Front bracket
Headers
2810-3462
Control Box
n
2810-3018
Rear Mounting Bracket
2810-275
Mounting Bracket
n
Wth openings for wiring
pecify length 49˝ to 98˝
S
maximum
Arms
2810-3077CP
Center Pivot Arm
2810-3077OP
Offset Pivot Arm
Center pivot installations only
n
Used with overhead concealed
operators and center pivoted
doors
n
n
n
2810-3077 OPCM
Offset Pivot Arm Assembly
Offset pivot or butt hung
installations only
Used with overhead concealed
operators
76
Offset arm with track and
concealing channel (includes
3072 concealing channel, 168
slide channel and 3077OP
offset pivot arm)
n
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2810
Series
Senior Swing
Accessories
Channels
Installation Accessories
2810-168
Slide channel
2810-3072
Concealing Channel
Used to conceal arm
in overhead concealed
applications
n
n
2810-384B
Door Stop Breakaway
ffset pivot or butt hinge
O
installations only
Allows in-swinging door to
swing out in case of emergency
n
Mounts in top rail of door
Disables operator in breakaway
mode.
n
For offset pivot installations
only
n
n
n
Allows arm to slide
2810-384F
Door Stop Fixed
Prevents out-swinging door
from swinging in
n
For center pivoted installations
only
n
For center pivoted installations
only
n
If ordering separately specify
length and hand
n
Pivots
2810-107
Bottom Pivot Body
2810-3107
Bottom Pivot Assembly
Includes pivot body, pivot post
and bottom pivot plate
n
2810-12
Filler Plate Blank
For center pivoted installations
n
Completes length of header
box
n
2810-11A
Spindle Plate
n
Hides bottom of motor gearbox
n
Completes header box
For overhead concealed, center
pivoted installations
n
Includes; 2810-107, 2810-110
and 2810-117
n
n
Cutout allows for motor
gearbox shaft
n
2810-110
Pivot Post
2810-11B
Spindle Plate
2810-117
Bottom Pivot Plate
Connects pivot body to bottom
pivot plate for center pivoted
installations
n
F or 2-3/4˝ center pivot
installations
Applied to floor for center
pivoted installations
n
n
Hides bottom of motor gearbox
n
Completes header box
Cutout allows for motor gearbox shaft
n
n
F or 3-3/4˝ offset pivot, butt hinge or center pivot with
finger guard installations
77
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2810
Series
Senior Swing
Ordering Information
How-to-order 2810 Series
Operator will be shipped with:
- Motor gearbox,
- Control box,
- Header (at specified length, 36˝ standard),
- Wood and machine screw pack
Select installation type
2811
Specify arm
3-3/4˝ (Offset pivoted) Arm (3077OP)
2-3/4˝ (Center pivoted) Arm (3077CP)
3-3/4˝ (Center pivoted) Arm (3077CP)
unless options listed below are selected.
Specify hand
RH
LH
Specify header/length
HL__ (Specify length 33˝ to 49˝ offset pivot)
HL__ (Specify length 36˝ to 49˝ center pivot)
DD__ (Specify length 49˝ to 98˝)
Specify finish
Standard Anodized Finish ______________
Aluminum or Dark Bronze
Operator options
Stops
Positive Mechanical Stop (POS)
Panic Breakaway Stop (BKY)
*Available with Center Pivoted installations only
Table of sizes
Door width
33˝
48˝
838mm
1219mm
2811
Minimum door width
Indicates recommended range of door width for operator.
NOTE: For all Senior Swing Series
Single Door - Width per leaf 33˝ minimum, 48˝ maximum
78
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2850
Series
Senior Swing
Features
The 2850 SENIOR SWING by LCN is an ADA door operator that is a two-in-one swing
door operator. SENIOR SWING operator when activated, opens doors automatically for
wheelchair access, yet allows for manual operation for regular pedestrian traffic.
Grade 1 - ANSI A156.19, UL325, UL1998,
ADA, 100 Hour Salt Spray, Meets BAA - Buy
American Act
Fluid
All Weather Fluid
Handing
Handed
Door Width
n
n
Wood and machine screw pack
Mounting
Double door, overhead concealed, center
pivot, offset pivot, butt hinge
Arms
Offset Pivot Arm or Center Pivot Arm
Finishes/Colors/
Powder Coat
Combined width min 52˝ - 96˝
Simultaneous pair - width per leaf 26˝
minimum to 48˝ maximum
n
n
Anodized Aluminum
Anodized Dark Bronze
2 years
Special
Templates
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
FINISH
HANDING
SU
RF
A
SU CE
RF MO
A
UN
SU CE
T
M
S
RF
AC OU ING
NT
LE
CO
E
NC MO SIM DO
EA UN
UL OR
T
CO LE
T
I
NC D S ND ANE
E
PE OU
CO EAL ING
S
N
NC ED LE
P
DO DEN AIR
EA SI
T
LE MU OR
PA
D
IR
IN LTA
DE NE
HA
O
PE
ND
ND US
NO ED*
EN PAI
R
NT
PA
HA
IR
ND
ED
ST
AN
DA
RD
AN
OD
M
ET
IZ
AL
ED
MOUNTING
COVER
ARM FUNCTION
M
Warranty
Fasteners
ST
AN
D
RE AR
GU D (
SI
L
DO AR NG
UB (DO LE L
E
U
L
OF E E BL VER
GR E L
FS
)
ES EV
E
ER
S
CE T PI
NT VO (PU )
SH
T
ER
/P
PI BUT
U
VO
T
HI LL)
T
N
AR
M GE
AR
Certifications
* For double egress only.
AVAILABLE
NOT AVAILABLE
79
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2850
Series
Senior Swing
4-1/2"
114 mm
Exterior
Mounting details
Emergency
Breakaway
Concealed
Simultaneous Pair
Emergency
Breakaway
Swing
Operator
5-3/4"
146 mm
1/8"
3 mm
3-3/4"
95 mm
3-3/4"
95 mm
1"
25 mm
Breakaway
Stop
1"
25 mm
Incoming
Breakaway
Direction
Swing
Direction
Incoming
Exterior
8'0" Door Opening (Max.)
Center pivot, emergency breakaway, pull
Shown w/ 3-3/4˝ pivot
4-1/2"
114 mm
Exterior
5-3/4"
146 mm
Swing
Operator
1/8"
3 mm
Outgoing
Outgoing
3-3/4"
95 mm
3-3/4"
95 mm
Fixed
Stop
Swing
Direction
1"
25 mm
1"
25 mm
Exterior
8'0" Door Opening (Max.)
Center pivot, fixed stop, push
Shown w/ 3-3/4˝ pivot
Head Frame
Minimum 52˝ (L) x 5-3/4˝ (H) x 4-1/2˝ (W) (1524 mm x 146 mm x 114 mm)
Top Rail
Minimum 2˝ (51 mm)
Opening and Closing Time
n
n
Variable by adjustments to the electronic control box
Maximum hold open time adjustable up to approximately 32 seconds.
Door Stop
Required for each door panel
System Diagram
See “AUTOMATIC OPERATORS” section page 51 for typical system wiring and page 53 for electrical data
Maximum Opening
Template allows 90 degree power opening and 90 degree manual opening
Notes:
• Push N' Go permits non-switch activation with power boost providing additional latching force
• Electromechanical unit with microprocessor control
• 36˝ header length is standard, specify length 33˝ - 49˝ max
• Double header available 98˝, specify length 49˝ - 98˝ max
• Fixed (positive) or breakaway stop available with center pivot arm
• Adjustable hold open time of 1-32 seconds
• Actuators available separately, see pages 115-131
80
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2850
Series
Senior Swing
Mounting details
Concealed
Simultaneous Pair
4-1/2"
114 mm
Exterior
5-3/4"
146 mm
Outgoing
Offset
Pivot or
Butt
Hinges
Swing
Operator
Outgoing
Slide Arm
Assembly
Slide Arm Assembly
with Slide Block
1/8"
3 mm
11" Slide Channel
10-1/2"
257 mm
Concealing
Channel
Swing
Direction
3-3/4"
95 mm
Concealing Channel
Door
Door
Frame
Offset pivot or butt hinge, slide arm, push
Shown w/ 3-3/4˝ pivot
Head Frame
Minimum 52˝ (L) x 5-3/4˝ (H) x 4-1/2˝ (W) (1524 mm x 146 mm x 114 mm)
Top Rail
Minimum 2˝ (51 mm)
Opening and Closing Time
n
n
Variable by adjustments to the electronic control box
Maximum hold open time adjustable up to approximately 32 seconds
Door Stop
Required for each door panel
System Diagram
See “AUTOMATIC OPERATORS” section page 51 for typical system wiring and page 53 for electrical data
Maximum Opening
Template allows 90 degree power opening and 90 degree manual opening
Notes:
• Push N' Go permits non-switch activation with power boost providing additional latching force
• Electromechanical unit with microprocessor control
• 36˝ header length is standard, specify length 33˝ - 49˝ max
• Double header available 98˝, specify length 49˝ - 98˝ max
• Fixed (positive) or breakaway stop available with center pivot arm
• Adjustable hold open time of 1-32 seconds
• Actuators available separately, see pages 115-131
81
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2850
Series
Senior Swing
9150
Series
Accessories
Accessories
Motor Gearbox
Mount Brackets
2850-375
Mounting Bracket
2850-3454
Motor Gearbox
n
Senior swing
n
Driving mechanism for operator
Motor gearbox mounting
bracket for 3-3/4˝ offset pivot,
butt hinge or center pivot with
finger guard installations
n
Provides maximum 15 lbs
opening force
n
n
n
Handed
n
Senior swing
Electronic controlling device for
Senior Swing
n
Motor gearbox mounting
bracket for 2-3/4˝ center pivot
installations
n
n
Rear bracket
n
Front bracket
Header
End Cap
2850-334
Header End Caps
2850-3572HL
Header
2850-982
Companion Cable
Cable that allows one
control box to run two motor
gearboxes
n
n
Motor gearbox mounting
bracket
n
Front bracket
Control Box
2850-3462
Control box
2850-3018
Rear Mounting Bracket
2850-275
Mounting Bracket
n
Mounting header
n
Pair door, two operators
n
For use with Senior Swing
n
End cap with openings for
wiring
n
pecify length 52˝ to 98˝
S
maximum
Standard
Arms
2850-3077CP
Center pivot arm
2850-3077OP
Offset pivot arm
Center pivot installations only
n
Used with overhead concealed
operators and center pivoted
doors
n
n
n
2850-3077OPCM
Offset Pivot Arm Assembly
Offset pivot or butt hung
installations only
Offset arm with track and
concealing channel
n
Handed
Includes 3072 Concealing
Channel, 168 Slide Channel and
30770P offset pivot arm
n
Used with overhead concealed
operators
n
82
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2850
Series
Senior Swing
2810
Series
Accessories
Accessories
Channels
Installation Accessories
2850-168
Slide Channel
2850-3072
Concealing Channel
Used to conceal arm
in overhead concealed
applications
n
n
For offset pivot installations
only
n
2850-384B
Door Stop Breakaway
Offset pivot or butt hinge
installations only
n
Mounts in top rail of door
n
Allows arm to slide
Allows in-swinging door to
swing out in case of emergency
n
For center pivoted installations
only
n
2850-384F
Door Stop Fixed
Prevents out-swinging door
from swinging in
n
For center pivoted installations
only
n
If ordering separately specify
length and hand
n
Pivots
2810-107
Bottom Pivot Body
2850-3107
Bottom Pivot Assembly
Includes pivot body, pivot post
and bottom pivot plate
n
2850-12
Filler Plate Blank
Pivot body for center pivoted
installations
n
Completes length of header
box
n
2850-11A
Spindle Plate
n
Hides bottom of motor gearbox
n
Completes header box
For overhead concealed, center
pivoted installations
n
Includes: 2850-107, 2850-110
and 2850-117
n
n
Cutout allows for motor
gearbox shaft
n
2850-110
Pivot Post
2850-11B
Spindle Plate
2850-117
Bottom Pivot Plate
Connects pivot body to bottom
pivot plate for center pivoted
installations
n
F or 2-3/4˝ center pivot
installations
Applied to floor for center
pivoted installations
n
n
Hides bottom of motor gearbox
n
Completes header box
Cutout allows for motor gearbox shaft
n
n
F or 3-3/4˝ offset pivot, butt hinge or center
pivot with finger guard installations
83
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2850
Series
Senior Swing
Ordering Information
How-to-order 2850 Series
Operator will be shipped with:
- Standard motor gearbox (1 lh & 1 rh)
- Standard control box
- Companion cable
- Header (at specified length - 72˝ standard)
- 2-3/4˝ pivot point
- Wood and machine screw pack
Select installation type
2853
Specify arm
3-3/4˝ (Offset pivoted) Arm (3077OP)
2-3/4˝ (Center pivoted) Arm (3077CP)
3-3/4˝ (Center pivoted) Arm (3077CP)
unless options listed below are selected.
Specify hand
RH
LH
Specify header/length
HL__ (Specify length 52˝ to 98˝)
Specify finish
Standard Anodized Finish ______________
Aluminum or Dark Bronze
Operator options
Stops*
Pair Positive Mechanical Stop (POS)
Pair Panic Breakaway Stop (BKY)
*Available with Center Pivoted installations only
Table of sizes
Door width
52˝
96˝
1524mm
2438mm
2853
Minimum door width
Indicates recommended range of door width for operator.
NOTE: For all Senior Swing Series
Simultaneous Pair – Width per leaf 26˝ minimum to 48˝ maximum.
84
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2860
Series
Senior Swing
Features
The 2860 SENIOR SWING by LCN is an ADA door operator that is a two-in-one swing
door operator. SENIOR SWING operator when activated, opens doors automatically for
wheelchair access, yet allows for manual operation for regular pedestrian traffic.
Grade 1 - ANSI A156.19, UL325/228, UL1998,
ADA, 100 Hour Salt Spray, Meets BAA - Buy
American Act
Handing
Handed
Door Width
n
n
Wood and machine screw packs
Mounting
Independent pair, overhead concealed,
center pivot, offset pivot, butt hinge
Arms
Offset Pivot Arm or Center Pivot Arm
Finishes/Colors/
Powder Coat
n
n
Anodized Aluminum
Anodized Dark Bronze
2 years
Special
Templates
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
FINISH
HANDING
SU
RF
A
SU CE
RF MO
A
UN
SU CE
T
RF MO SI
AC
UN NG
LE
CO
E
T
NC MO SIM DO
U
O
E
U
CO ALE NT I LTA R
D
N
NC
D NE
S
CO EAL ING EPE OUS
N
NC ED LE
P
DO DEN AIR
EA SI
M
T
O
LE
PA
D ULT R
IR
IN
AN
DE
HA
EO
P
ND
EN US
DE
P
NO ED*
NT AIR
NPA
HA
IR
ND
ED
ST
AN
DA
RD
AN
OD
M
ET
IZ
AL
ED
MOUNTING
COVER
phone: 877-671-7011
fax: 800-248-1460
n
www.allegion.com/us
* For double egress only.
AVAILABLE
NOT AVAILABLE
85
LCN Door Control Catalog
n
ARM FUNCTION
M
Warranty
inimum combined door with 52˝ - 96˝
M
Simultaneous pair - width per leaf 26˝
minimum to 48˝ maximum
Fasteners
ST
AN
D
RE AR
GU D (
SI
L
DO AR NG
(
UB DO LE L
E
U
L
OF E E BL VER
GR E L
FS
)
ES EV
E
ER
S
CE T PI
NT VO (PU )
SH
T
ER
/P
PI BUT
U
VO
T
HI LL)
T
NG
AR
M
E
AR
Certifications
n
009426 rev. 2/16
2860
Series
Senior Swing
Mounting details
4-1/2"
114 mm
Exterior
Emergency
Breakaway
Concealed
Independent Pair
Emergency
Breakaway
Swing
Operator
5-3/4"
146 mm
1/8"
3 mm
3-3/4"
95 mm
3-3/4"
95 mm
1"
25 mm
Breakaway
Stop
1"
25 mm
Incoming
Breakaway
Direction
Swing
Direction
Incoming
Exterior
8'0" Door Opening (Max.)
Center pivot, emergency breakaway, pull
Shown w/ 3-3/4˝ pivot
4-1/2"
114 mm
Exterior
Swing
Operator
5-3/4"
146 mm
1/8"
3 mm
Outgoing
Outgoing
3-3/4"
95 mm
3-3/4"
95 mm
Fixed
Stop
Swing
Direction
1"
25 mm
1"
25 mm
Exterior
8'0" Door Opening (Max.)
Center pivot, fixed stop, push
Shown w/ 3-3/4˝ pivot
Head Frame
Minimum 65˝ (L) x 5 3/4˝ (H) x 4 1/2˝ (W) (1651 mm x 146 mm x 114 mm)
Top Rail
Minimum 2˝ (51 mm)
Opening and Closing Time
n
n
Variable by adjustments to the electronic control box
Maximum hold open time adjustable up to approximately 32 seconds.
Door Stop
Required for each door panel
System Diagram
See “AUTOMATIC OPERATORS” section page 51 for typical system wiring and page 53 for electrical data
Maximum Opening
Template allows 90 degree power opening and 90 degree manual opening
Note:
• Push N' Go permits non-switch activation with power boosts providing additional latching force
• Electromechanical unit with microprocessor control
• Digital keypad for easy setup
• 72" header length is standard. Specify other length 65" - 98" max. Consult factory with this option
• Adjustable hold time of 1-32 seconds
• Actuators available separately, see pages 115-131
86
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9150
Series
2860
Series
Senior Swing
Mounting details
Mounting details
Concealed
Independent Pair
4-1/2"
114 mm
Exterior
5-3/4"
146 mm
Outgoing
Offset
Pivot or
Butt
Hinges
Swing
Operator
Outgoing
Slide Arm
Assembly
Slide Arm Assembly
with Slide Block
1/8"
3 mm
11" Slide Channel
10-1/2"
257 mm
Concealing
Channel
Swing
Direction
3-3/4"
95 mm
Concealing Channel
Door
Door
Frame
Offset pivot/butt hinge, push
Head Frame
Minimum 65˝ (L) x 5-3/4˝ (H) x 4-1/2˝ (W) (1651 mm x 146 mm x 114 mm)
Top Rail
Minimum 2˝ (51 mm)
Opening and Closing Time
n
n
Variable by adjustments to the electronic control box
Maximum hold open time adjustable up to approximately 32 seconds
Door Stop
Required for each door panel
System Diagram
See “AUTOMATIC OPERATORS” section page 51 for typical system wiring and page 53 for electrical data
Maximum Opening
Template allows 90 degree power opening and 90 degree manual opening
Notes:
• Offset pivot installations require a bottom pivot and two intermediate pivots
Push N' Go permits non-switch activation with power boosts providing additional latching force
Electromechanical unit with microprocessor control
Digital keypad for easy setup
72˝ header length is standard. Specify other length 65˝ - 98˝ max. Consult factory with this option
Optional fixed (POS) or breakaway stop (BKY) available (center pivot arm)
Header lengths 70˝ - 98˝ max with either POS or BKY
Adjustable hold time of 1-32 seconds
Actuators available separately, see pages 115-131
87
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2860
Series
Senior Swing
9150
Series
Accessories
Accessories
Motor Gearbox
Mount Brackets
2860-375
Mounting Bracket
2860-3454
Motor gearbox
n
Senior swing
n
Handed
n
Driving mechanism for operator
Motor gearbox mounting
bracket for 3-3/4˝ offset pivot,
butt hinge or center pivot with
finger guard installations
n
Provides maximum 15 lbs
opening force
n
Control Box
2860-275
Mounting Bracket
n
Electronic controlling device for
Senior Swing
n
n
n
n
Motor gearbox mounting
bracket
n
n
Rear bracket
Front bracket
End Cap
2860-3572HL
Mounting Header
n
Motor gearbox mounting
bracket for 2-3/4˝ center pivot
installations
n
Front bracket
Header
2860-3462
Control box
2860-3018
Rear Mounting Bracket
2860-334
Header End Caps
Pair door, two operators
n
With openings for wiring
pecify length 65˝ to 98˝
S
maximum
Standard
Arms
2860-3077CP
Center Pivot Arm
2860-3077OP
Offset Pivot Arm
Center pivot installations only
n
Used with overhead concealed
operators and center pivoted
doors
n
n
n
2860-3077OPCM
Offset Pivot Arm Assembly
Offset pivot or butt hung
installations only
Offset arm with track and
concealing channel
n
Used with overhead concealed
operators
88
Includes 3072 Concealing
Channel, 168 Slide Channel and
30770P offset pivot arm
n
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2860
Series
Senior Swing
2810
Series
Accessories
Channels
Installation Accessories
2860-168
Slide Channel
2860-3072
Concealing Channel
Used to conceal arm
in overhead concealed
applications
2860-384B
Door Stop Breakaway
Offset pivot or butt hinge
installations only
n
Allows in-swinging door to
swing out in case of emergency
n
For offset pivot installations
only
n
n
Mounts in top rail of door
n
Allows arm to slide
n
For center pivoted installations
only
n
2860-384F
Door Stop Fixed
Prevents out-swinging door
from swinging in
n
For center pivoted installations
only
n
If ordering separately specify
length and hand
n
Pivots
2860-12
Filler Plate Blank
2860-107
Bottom Pivot Body
2860-3107
Bottom Pivot Assembly
Includes pivot body, pivot post
and bottom pivot plate
n
Pivot body for center pivoted
installations
n
Completes length of header
box
n
2860-11A
Spindle Plate
n
Hides bottom of motor gearbox
n
Completes header box
For overhead concealed, center
pivoted installations
n
Includes: 2860-107, 2860-110
and 2860-117
n
n
Cutout allows for motor
gearbox shaft
n
2860-110
Pivot Post
2860-11B
Spindle Plate
2860-117
Bottom Pivot Plate
Connects pivot body to bottom
pivot plate for center pivoted
installations
n
F or 2-3/4˝ center pivot
installations
Applied to floor for center
pivoted installations
n
n
Hides bottom of motor gearbox
n
Completes header box
Cutout allows for motor gearbox
shaft
n
n
F or 3-3/4˝ offset pivot, butt hinge
or center pivot with finger guard
installations
89
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
2860
Series
Senior Swing
Ordering Information
How-to-order 2860 Series
Operator will be shipped with:
- Standard motor gearbox (1 lh & 1 rh)
- Standard control box (2 ea)
- Header (at specified length - 72˝ standard)
- 2-3/4˝ pivot point
- Wood and machine screw pack
Select installation type
2863
Specify arm
3-3/4˝ (Offset pivoted) Arm (3077OP)
2-3/4˝ (Center pivoted) Arm (3077CP)
3-3/4˝ (Center pivoted) Arm (3077CP)
unless options listed below are selected.
Specify hand
RH
LH
Specify header/length
HL__ (Specify length 65˝ to 98˝)
Specify finish
Standard Anodized Finish ______________
Aluminum or Dark Bronze
Operator options
Stops*
Pair Positive Mechanical Stop (POS)
Pair Panic Breakaway Stop (BKY)
*Available with Center Pivoted installations only
Table of sizes
Door width
65˝
96˝
1651mm
2438mm
2863
Minimum door width
Indicates recommended range of door width for operator.
NOTE: For all Senior Swing Series
Independent Pair – Width per leaf 32-1/2˝ minimum to 48˝ maximum
90
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9530
Series
Senior Swing
Features
The 9530 SENIOR SWING by LCN is an ADA door operator that is a two-in-one swing
door operator. SENIOR SWING operators when activated, opens doors automatically for
wheelchair access, yet allows for manual operation for regular pedestrian traffic.
Certifications
Grade 1 - ANSI A156.19, UL325/228, UL1998,
ADA, 100 Hour Salt Spray, Meets BAA - Buy
American Act
Fluid
All Weather Fluid
Handing
Handed
Door Width
n
n
Warranty
Minimum 33˝ - 48˝
Single door - width per leaf 33˝ minimum,
48˝ maximum
Fasteners
Machine screw pack
Mounting
Single door, surface mount, offset pivot.
butt hinge, pull side
Arms
Standard arm (3077T)
Finishes/Colors/
Powder Coat
n
n
Anodized Aluminum
Anodized Dark Bronze
2 years
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
phone: 877-671-7011
fax: 800-248-1460
n
www.allegion.com/us
AVAILABLE
NOT AVAILABLE
91
LCN Door Control Catalog
n
ARM FUNCTION
DA
R
GU D (
LA SIN
DO R
G
UB (DO LE)
LE UB
OF
EG LE
FS
)
ET RES
S
CE
PI
(
PU
NT VO
SH
T
ER
B
/P
U
PI
UL
VO TT
L
H
T
AR ING )
M
E
AR
M
COVER
RE
SU
E
RF MO
AC
UN
SU
E
T
RF MO SI
AC
UN NG
LE
CO
E
T
NC MO SIM DO
U
O
E
U
CO ALE NT I LTA R
NC D S ND NE
CO EAL ING EPE OUS
N
NC ED LE
P
DO DEN AIR
EA SI
T
LE MU OR
PA
D
IR
IN LTA
N
DE
HA
EO
P
ND
EN US
DE
P
NO ED
NT AIR
NPA
HA
IR
ND
ED
ST
AN
DA
RD
AN
M
OD
ET
IZ
AL
ED
RF
AC
SU
FINISH
HANDING
MOUNTING
ST
AN
Special
Templates
n
009426 rev. 2/16
4-3/4"
121 mm
9530
Series
Senior Swing
48" Door Opening (Max.)
17-3/8"
Pull Channel
Mounting details
11-1/2"
292 mm
2-3/4"
70 mm
Swing
Operator
Top Jamb Single Door
Mounting
6-3/4"
171 mm
Offset
Pivot or
Butt
Hinges
Pull Arm
Assembly
5-3/4"
146 mm
1-15/16"
49 mm
Swing
Operator
1"
25 mm
Pull
Channel
Left Hand
INCOMING
Swing
Direction
Door
1-3/4"
44 mm
Interior
Offset pivot/butt hinge, center pivot, pull
NOTE: Cannot be used with swing clear hinges, pocket pivots or balanced doors.
Shim behind
plate by others
4-1/2"
Swing
Operator
5-3/4"
6-3/4"
The 18 plate is 6-3/4" thick and will need to be ordered 3-/1/2"
longer than the header to allow for mounting the angle brackets
to the vertical side jambs. See illustration below.
The length of universal 18 plate will need to be
ordered 3-1/2" longer than the supplied header
Universal
18 plate
Door opening width
& length of header
1-3/4"
Hollow
Metal Frame
Install the plate securely to the frame
using field generated mounting holes
Bottom of frame rabbet
& botom of 18 plate
Stop
Hollow metal frame
Suggested Installation.
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Reveal
Should not exceed 4˝ (102 mm)
Head Frame
Minimum 1-3/4˝ (44 mm). Face frame 6-3/4˝ (171 mm) total operator clearance
Top Rail
Minimum 2-3/4˝ (70 mm)
Opening and Closing Time
n
n
Variable by adjustments to the electronic control box
Maximum hold open time adjustable up to approximately 32 seconds
System Diagram
See “AUTOMATIC OPERATORS” section page 51 for typical system wiring and page 53 for electrical data
Maximum Opening
Template allows 90 degree power opening and 90 degree manual opening
Notes:
• Push N' Go permits non-switch activation with a power boost providing additional latching force
• Electromechanical unit with microprocessor control
• Digital keypad for easy setup
• 36" header length is standard. Specify 33" - 48" max
• Double door header available up to 98", specify other length 49" - 98" max
• Consult factory regarding this option
• Adjustable hold open period of 2 - 32 seconds in automatic or manual mode
• Actuators available separately, see pages 115-131
92
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9530
Series
Senior Swing
Accessories
Motor Gearbox
Mount Brackets
9530-275
Mounting Bracket
9530-3454
Motor Gearbox
n
Senior swing
n
Handed
n
Driving mechanism for operator
9530-3018
Rear Mounting Bracket
Motor gearbox mounting
bracket for 2-3/4˝ offset pivot
or butt hinge installations
n
n
Provides maximum 15 lbs
opening force
Motor gearbox mounting
bracket
n
n
Rear bracket
9530-334-1
Angled Bracket
Mounting bracket for surface
applications (includes 2
mounting brackets)
n
Front bracket
n
Control Box
Headers
Electronic controlling device for
Senior Swing
n
9530-3572DD
Header
9530-3572HL
Header
9530-3462
Control Box
n
Standard
n
Standard
n
Single door, single operator
n
Double door, single operator
n
pecify length 33˝ to 48˝
S
maximum
n
pecify length 49˝ to 98˝
S
maximum
End Caps
9530-334
Header End Caps
n
With openings for wiring
9530-334-2
End Dress Plate
n
Metal finish end cap
93
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9530
Series
Senior Swing
Accessories
Arms
9530-3077PLCM
Standard Arm Assembly
n
Handed
Track roller included (includes
3038, 3077T, 3034 & 73)
n
9530-3077T
Standard Arm
n
Handed
n
Track roller not included
Tracks
9530-3038
Track
Non-handed
n
n
9530-73
Track End Cap
n
9530-3034
Roller
Black plastic end caps
n
Quiet low friction roller assembly
Includes 3034 & 73
Installation Assembly
9530-11A
Spindle Plate
9530-12
Filler
n
Hides bottom of motor gearbox
n
n
Completes header box
n
Cutout allows for motor gearbox
shaft
n
n
9530-18
Mounting Plate
Plate blank
Optional mounting plate for
standard hollow metal door
frames
n
Completes length of header box
(specify Length)
n
F or 2-3/4˝ offset pivot or butt
hinge installations
n
pecify length 36-1/2˝ to 101-1/2˝
S
maximum, when angle brackets
pecify length 33˝ to 98˝
S
maximum when using end dress
plates
NOTE: The length of a universal 18 plate
will need to be ordered 3-1/2˝ longer than
the supplied header when using angle
brackets
94
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9530
Series
Senior Swing
Ordering Information
How-to-order 9530 Series closers
Operator will be shipped with:
- Standard motor gearbox
- Standard control box
- Header (at specified length, 36˝ standard)
- Standard arm (3077T)
- 2-3/4˝ pivot point
- Standard track w/track roller
- Machine screw pack
Specify hand
RH
LH
Specify header/length
HL __ (Specify length 33˝ to 48˝)
DD __ (Specify length 49˝ to 98˝)
unless options listed below are selected
Specify finish
Standard Anodized Finish ______________
Aluminum or Dark Bronze
Operator options
Mounting plate
Plate, ____ (Specify Length 33˝ to 101-1/2˝)
Table of sizes
Door width
33˝
48˝
838mm
1219mm
9531
Minimum door width
Indicates recommended range of door width for operator.
NOTE: For all Senior Swing Series.
Single Door - Width per leaf 33˝ minimum, 48˝ maximum.
95
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
96
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9540
Series
Senior Swing
Features
The 9540 SENIOR SWING by LCN is an ADA door operator that is a two-in-one swing
door operator. SENIOR SWING operators when activated, opens doors automatically for
wheelchair access, yet allows for manual operation for regular pedestrian traffic.
Grade 1 - ANSI A156.19, UL325/228, UL1998,
ADA, 100 Hour Salt Spray, Meets BAA - Buy
American Act
Fluid
All Weather Fluid
Handing
Handed
Door Width
n
n
Warranty
Minimum door width 33˝ - 48˝
Single door - width per leaf 33˝ minimum,
48˝ maximum
Fasteners
Machine screw pack
Mounting
Single door, surface mount, offset pivot,
butt hinge (Push Side)
Arms
Regular Arm (3077)
Finishes/Colors/
Powder Coat
n
n
Anodized Aluminum
Anodized Dark Bronze
2 years
Special
Templates
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
FINISH
HANDING
SU
RF
A
SU CE
RF MO
A
UN
SU CE
T
RF MO SI
AC
UN NG
LE
CO
E
T
NC MO SIM DO
U
O
E
U
CO ALE NT I LTA R
NC D S ND NE
CO EAL ING EPE OUS
N
NC ED LE
P
DO DEN AIR
EA SI
T
LE MU OR
PA
D
IR
IN LTA
N
D
HA
EP EO
ND
EN US
DE
P
NO ED
NT AIR
NP
HA
AI
R
ND
ED
ST
AN
DA
RD
AN
M
OD
ET
IZ
AL
ED
MOUNTING
COVER
AVAILABLE
NOT AVAILABLE
97
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
ARM FUNCTION
ST
AN
D
RE AR
GU D (
SI
L
DO AR NG
UB (DO LE
U LE
L
OF E E BL VER
GR E L
FS
)
ES EV
E
ER
S
CE T PI
NT VO (PU )
SH
T
ER
/P
PI BUT
UL
VO
T
L
H
T
I
NG )
AR
M
E
AR
M
Certifications
www.allegion.com/us
n
009426 rev. 5/16
9540
Series
Senior Swing
Top Jamb Single Door
Mounting
Door
Swing
Operator
6-3/4" 5-3/4"
171 mm 146 mm
Outgoing
1-7/16" from
top of door
Push Arm
Assembly
Offset
Pivot or
Butt
Hinges
1"
25 mm
17" from
edge of door
2-3/4"
70 mm
Reveal
Mounting details
4-1/2"
114 mm
Swing
Direction
Secondary Link
Swing
Operator
Door
Exterior
Door
Frame
48" Door Opening (Max.)
Offset pivot/butt hinge, center pivot, push
Consult factory for all balance door installations.
Shim behind
plate by others
4-1/2"
Swing
Operator
5-3/4"
6-3/4"
The 18 plate is 6-3/4" thick and will need to be ordered 3-/1/2"
longer than the header to allow for mounting the angle brackets
to the vertical side jambs. See illustration below.
The length of universal 18 plate will need to be
ordered 3-1/2" longer than the supplied header
Universal
18 plate
Door opening width
& length of header
1-3/4"
Hollow
Metal Frame
Install the plate securely to the frame
using field generated mounting holes
Bottom of frame rabbet
& botom of 18 plate
Stop
Hollow metal frame
Suggested Installation.
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Reveal
push installations should not exceed 10˝ (254 mm) for REGULAR ARM and 20˝ (508 mm) for LONG ARM
Head Frame
Minimum 1-3/4˝ (44 mm). Face frame 6-3/4˝ (171 mm) total operator clearance
Top Rail
Minimum 2-3/4˝ (70 mm)
Opening and Closing Time
n
n
Variable by adjustments to the electronic control box
Maximum hold open time adjustable up to approximately 32 seconds
System Diagram
See “AUTOMATIC OPERATORS” section page 51 for typical system wiring and page 53 for electrical data
Maximum Opening
Template allows 90 degree power opening and 90 degree manual opening
Notes:
• Push N' Go permits non-switch activation with a power boost providing additional latching force
• Electromechanical unit with microprocessor control
• Digital keypad for easy setup
• 36" header length is standard. Specify 33" - 48" max
• Double door header available up to 98", specify other length 49" - 98" max
• Adjustable hold open period of 2 - 32 seconds in automatic or manual mode
• Actuators available separately, see pages 115-131
98
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9540
Series
Senior Swing
Accessories
Motor Gearbox
Mount Brackets
9540-275
Mounting Bracket
9540-3454
Motor Gearbox
n
Senior swing
n
Handed
n
Driving mechanism for operator
9540-3018
Rear Mounting Bracket
Motor gearbox mounting
bracket for 2-3/4˝ offset pivot
or butt hinge installations
n
n
Provides maximum 15 lbs
opening force
Motor gearbox mounting
bracket
n
n
Rear bracket
9540-334-1
Angled Bracket
Mounting bracket for surface
applications (includes 2
mounting brackets)
n
Front bracket
n
Control Box
Headers
9540-3572DD
Header
9540-3572HL
Header
9540-3462
Control Box
Electronic controlling device for
Senior Swing
n
n
n
n
Single door, single operator
pecify length 33˝ to 48˝
S
maximum
n
n
Standard
n
Double door, single operator
pecify length 49˝ to 98˝
S
maximum
Standard
End Caps
9540-334
Header End Caps
n
With openings for wiring
9540-334-2
End Dress Plate
n
Metal finish end cap
99
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9540
Series
Senior Swing
Accessories
Arms
9540-3077
Regular Arm Assembly
Handed
n
Includes 77 main arm assembly
and 79 linkage assembly
n
9540-3077L
Regular Long Arm Assembly
9540-77
Main Arm
Handed
Handed
n
n
Includes 77 main arm assembly
and 79LR linkage assembly
Attaches to motor gearbox
n
n
Tracks
9540-79
Linkage Assembly - 15˝
Threaded rod attaches to door
n
n
Extends from main arm
9540-79LR
Linkage Assembly - 32˝
Threaded long rod attaches to
door
n
n
Extends from main arm.
n
Used for reveal 10˝ to 20˝
Installation Accessories
9540-11A
Spindle Plate
Hides bottom of motor gearbox
n
Completes header box
n
9540-18
Mounting Plate
9540-12
Filler Plate Blank
Completes length of header box
(specify length)
n
Cutout allows for motor gearbox
shaft
n
n
F or 2-3/4˝ offset pivot or butt
hinge installations
n
For standard hollow metal door frames
n
Specify length 55-1/2˝ to 101-1/2˝ maximum when using angle brackets
n
Specify length 52˝ to 98˝ maximum when using dress plates
n
Optional
NOTE: The length of a universal 18 plate will need to be ordered 3-1/2˝ longer than
the supplied header when using angle brackets.
100
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9540
Series
Senior Swing
Ordering Information
How-to-order 9540 Series closers
Operator will be shipped with:
- Standard motor gearbox
- Standard control box
- Header (at specified length, 36˝ standard)
- Regular arm (3077)
- 2-3/4˝ pivot point
- Machine screw pack
Specify hand
RH
LH
Specify header/length
HL __ (Specify length 33˝ to 48˝)
DD __ (Specify length 49˝ to 98˝)
unless options listed below are selected.
Specify finish
Standard Anodized Finish ______________
Aluminum or Dark Bronze
Operator options
Mounting plate
Plate, ____ (Specify Length 33˝ to 101-1/2˝)
Arm
Long Arm (3077L)
Table of sizes
Door width
33˝
48˝
838mm
1219mm
9542
Minimum door width
Indicates recommended range of door width for operator.
NOTE: For all Senior Swing Series.
Single Door - Width per leaf 33˝ minimum, 48˝ maximum.
101
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
102
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9550
Series
Senior Swing
Features
The 9550 SENIOR SWING by LCN is an ADA door operator that is a two-in-one swing
door operator. SENIOR SWING operators when activated, opens doors automatically for
wheelchair access, yet allows for manual operation for regular pedestrian traffic.
Grade 1 - ANSI A156.19, UL325/228, UL1998,
ADA, 100 Hour Salt Spray, Meets BAA - Buy
American Act
Handing
Handed
Door Width
n
n
n
Warranty
inimum combined door width 52˝ - 98˝
M
(push)
Minimum combined door width 60˝ - 98˝
(pull; double egress)
Simultaneous pair - width per leaf 30˝
minimum - 48˝ maximum
Fasteners
Machine screw pack
Mounting
Simultaneous pair, surface mount, pull side,
push side, double egress
Arms
n
n
n
Finishes/Colors/
Powder Coat
n
n
2 Regular Arms (push)
2 Standard Arms (pull)
1 Regular and 1 Standard (double egress)
Anodized Aluminum
Anodized Dark Bronze
2 years
Special
Templates
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
HANDING
SU
RF
A
SU CE
RF MO
A
UN
SU CE
T
RF MO SI
AC
UN NG
LE
CO
E
T
NC MO SIM DO
U
O
E
U
CO ALE NT I LTA R
NC D S ND NE
CO EAL ING EPE OUS
N
NC ED LE
P
DO DEN AIR
EA SI
M
T
O
LE
PA
D ULT R
IR
IN
AN
DE
HA
EO
P
ND
EN US
DE
P
NO ED
NT AIR
NPA
HA
IR
ND
ED
ST
AN
DA
RD
AN
M
OD
ET
IZ
AL
ED
MOUNTING
FINISH COVER
AVAILABLE
NOT AVAILABLE
103
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
ARM FUNCTION
ST
AN
D
RE AR
GU D (
SI
L
DO AR NG
UB (DO LE L
E
U
L
OF E E BL VER
GR E L
FS
)
ES EV
E
ER
S
CE T PI
NT VO (PU )
SH
T
ER
/P
PI BUT
UL
VO
T
L
H
T
AR ING )
M
E
AR
M
Certifications
n
009426 rev. 2/16
9550
Series
Senior Swing
4-1/2"
114 mm
Outgoing
6-3/4"
171 mm
Outgoing
5-3/4"
146 mm
Swing
Operator
1-7/16" from
top of door
Push Arm
Assembly
17" from
edge of door
1"
25 mm
Offset
Pivot or
Butt
Hinges
Reveal
Mounting details
Top Jamb Simultaneous
Pair Mounting
Secondary Link
2-3/4"
70 mm
Swing Operator
Swing
Direction
Door
Door
Frame
8'0" Door Opening (Max.)
Exterior
Offset pivot/butt hinge, center pivot, push
Consult factory for all balanced door installations.
4-1/2"
114 mm
8'0" Door Opening (Max.)
11-1/2"
291 mm
17-3/8"
441 mm
2-3/4"
70 mm
Pull Channel
Swing Operator
Pull Arm
Assembly
Incoming
Offset
Pivot or
Butt
Hinges
Swing
6-3/4" 5-3/4"
171 mm 146 mm Operator
1"
25 mm
Pull Arm
Assembly
Pull Channel
1-15/16"
49 mm
Swing
Direction
Incoming
Interior
1-3/4"
44 mm
Interior
Door
Offset pivot/ butt hinge, center pivot, pull
NOTE: Cannot be used with swing clear hinges, pocket pivots or
balanced doors.
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Reveal for push
Should not exceed 10˝ (254 mm) for REGULAR ARM and 20˝ (508 mm) for LONG ARM
Reveal for pull
Should not exceed 4˝ (102 mm)
Reveal
Double egress installations should not exceed 4˝ (102 mm)
Head Frame
n
n
Minimum 1-3/4˝ (44 mm)
Face frame 6-3/4˝ (171 mm) total operator clearance
Top Rail
Minimum 2-3/4˝ (70 mm)
Opening and Closing Time
n
n
Variable by adjustments to the electronic control box
Maximum hold open time adjustable up to approximately 32 seconds.
Door Stop
Required for each door panel
System Diagram
See “AUTOMATIC OPERATORS” section page 51 for typical system wiring and page 53 for electrical data
Maximum Opening
Template allows 90 degree power opening and 90 degree manual opening
Notes:
• Push N' Go permits non-switch activation with a power boost providing additional latching force
• Electromechanical unit with microprocessor control
• Digital keypad for easy setup
• 72" header length is standard. Specify other length 52" - 98" (push), specify other length 60" - 98" (pull; double egress). Consult factory regarding this option
• Adjustable hold open period of 2 - 32 seconds in automatic or manual mode
• Actuators available separately, see pages 115-131
104
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Swing
Operator
Swing
Operator
17" from
edge of door
Butt
Hinges
17-3/8"
Pull Channel
11-1/2"
292 mm
5-3/4"
146 mm
Swing
Operator
1"
25 mm
Push Arm
Assembly
2-3/4"
70 mm
Mounting details
1"
25 mm Pull Arm
Assembly
Secondary
Link
Door
Frame
Push Arm
Assembly
Swing
Operator
Swing
Direction
Pull Channel
Door
Frame
Door
Swing
Direction
1-15/16"
from top of door
2-3/4"
70 mm
Pull Arm
Assembly
6-3/4" 171 mm
48" Door Opening (Max.)
9550
Series
Senior Swing
4-1/2"
114 mm
5-3/4" 146 mm
1-3/4"
44 mm
2-3/18" from bottom
of door stop
4-1/2"
114 mm
Top Jamb Simultaneous
Pair Mounting
Door
Interior
Rh double egress
Double egress applications with safety sensors require LCN 9560 series.
NOTE: Cannot be used with swing clear hinges, pocket pivots or balanced door.
Shim behind
plate by others
4-1/2"
Swing
Operator
5-3/4"
6-3/4"
The 18 plate is 6-3/4" thick and will need to be ordered 3-/1/2"
longer than the header to allow for mounting the angle brackets
to the vertical side jambs. See illustration below.
The length of universal 18 plate will need to be
ordered 3-1/2" longer than the supplied header
Universal
18 plate
Door opening width
& length of header
1-3/4"
Hollow
Metal Frame
Install the plate securely to the frame
using field generated mounting holes
Bottom of frame rabbet
& botom of 18 plate
Stop
Hollow metal frame
Suggested Installation.
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Reveal for push
Should not exceed 10˝ (254 mm) for REGULAR ARM and 20˝ (508 mm) for LONG ARM
Reveal for pull
Should not exceed 4˝ (102 mm)
Reveal
Double egress installations should not exceed 4˝ (102 mm)
Head Frame
n
n
Minimum 1-3/4˝ (44 mm)
Face frame 6-3/4˝ (171 mm) total operator clearance
Top Rail
Minimum 2-3/4˝ (70 mm)
Opening and Closing Time
n
n
Variable by adjustments to the electronic control box
Maximum hold open time adjustable up to approximately 32 seconds.
Door Stop
Required for each door panel
System Diagram
See “AUTOMATIC OPERATORS” section page 51 for typical system wiring and page 53 for electrical data
Maximum Opening
Template allows 90 degree power opening and 90 degree manual opening
Notes:
• Push N' Go permits non-switch activation with a power boost providing additional latching force
• Electromechanical unit with microprocessor control
• Digital keypad for easy setup
• 72" header length is standard. Specify other length 52" - 98" (push), specify other length 60" - 98" (pull; double egress). Consult factory regarding this option
• Adjustable hold open period of 2 - 32 seconds in automatic or manual mode
• Actuators available separately, see pages 115-131
105
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9550
Series
Senior Swing
Accessories
Motor Gearbox
Mount Brackets
9550-275
Mounting Bracket
9550-3454
Motor Gearbox
n
Senior swing
n
Handed
Motor gearbox mounting
bracket for 2-3/4˝ offset pivot
or butt hinge installations
n
Driving mechanism for operator
n
n
Provides maximum 15 lbs
opening force
9550-334-1
Angled Bracket
9550-3018
Rear Mounting Bracket
Motor gearbox mounting
bracket
Mounting bracket for surface
applications (includes 2
mounting brackets)
n
n
Front bracket
n
Control Box
9550-3462
Control Box
Electronic controlling device for
Senior Swing
n
Header
9550-3572HL
Header
9550-982
Companion Cable
Cable that allows one control
box to run two motor gear
boxes
n
For use with Senior Swing
n
Pair door, two operators
n
Specify other length 52˝ to 98˝ (Push)
n
Specify other length 60˝ to 98˝ (Pull; Double Egress)
n
Standard
n
End Caps
9550-334
Header End Caps
n
With openings for wiring
9550-334-2
End Dress Plate
n
Metal finish end cap
106
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9550
Series
Senior Swing
Tracks
Accessories
9550-3038
Track
n
Non-handed
n
Standard
9550-3034
Roller
9550-73
Track End Cap
Black plastic end caps
n
Quiet low friction roller
assembly
n
Arms
9550-3077Plcm
Standard Arm Assembly
n
9550-3077L
Regular Long Arm Assembly
9550-3077
Regular Arm Assembly
Handed
Handed
n
Includes 3077 regular arm
assembly, 3038 track, and
3034 track roller
n
Includes 77 main arm assembly
and 79 linkage assembly
Handed
n
Includes 77 main arm assembly
and 79LR linkage assembly
n
n
n
9550-77
Main Arm
9550-79
Linkage Assembly
9550-79LR
Linkage Assembly
Handed
n
Attaches to motor gearbox
n
n
n
15˝
n
Threaded rod attaches to door
n
Extends from main arm
n
9550-3077T
Standard Arm
Handed
Track roller not included
n
32˝
Threaded long rod attaches to door
Extends from main arm
n
n
Used for reveal 10˝ to 20˝
Installation Assembly
9550-11A
Spindle Plate
9550-12
Filler Plate
n
Hides bottom of motor gearbox
n
n
Completes header box
n
Cutout allows for motor gearbox
shaft
n
n
9550-18
Mounting Plate
Blank
n
Optional mounting plate for standard hollow metal door frames
Completes length of header box
n
Specify length 68-1/2˝ to 101-1/2˝ maximum when using angle brackets
Specify length
n
Specify length 65˝ to 98˝ maximum when using dress plates.
n
NOTE: The length of a universal 18 plate will need to be ordered 3-1/2˝ longer than
the supplied header when using angle brackets.
F or 2-3/4˝ offset pivot or butt
hinge installations
107
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9550
Series
Senior Swing
Ordering Information
How-to-order 9550 Series closers
Operator will be shipped with:
- Standard motor gearbox (sf) (2 ea)
- Standard control box (sc)
- Metal cover (at specified length 72˝ standard)
- Regular arm (2 ea)
- 2-3/4˝ pivot point
- Machine screw pack
Specify hand
RH
LH
Specify header/length
HL__ (Specify length 52˝ to 98˝) regular or long arm
HL__ (Specify length 60˝ to 98˝) for standard or DE arm
unless options listed below are selected
Specify finish
Standard Anodized Finish ______________
Aluminum or Dark Bronze
Operator options
Mounting plate
Plate, ____ (Specify Length 52˝ to 101-1/2˝)
Arm
Standard Arm (2 ea) w/Standard Track (2 ea)
Double Egress includes Standard Arm w/Track (1 ea) & Regular Arm (1 ea)
Long Arm (3077L)
Table of sizes
Combined door width
52˝
60˝
98˝
1321mm
1524mm
2489mm
9550 (Push)
9550 (Pull; Double Egress)
Minimum door width
Indicates recommended range of door width for operator.
NOTE: For all Senior Swing Series.
Simultaneous Pair – Width per leaf 26" minimum (push) 30˝ minimum (pull) to 48˝ maximum.
108
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9560
Series
Senior Swing
Features
The 9560 SENIOR SWING by LCN is an ADA door operator that is a two-in-one swing
door operator. SENIOR SWING operators when activated, opens doors automatically for
wheelchair access, yet allows for manual operation for regular pedestrian traffic.
Grade 1 - ANSI A156.19, UL325/228, UL1998,
ADA, 100 Hour Salt Spray, Meets BAA - Buy
American Act
Special
Templates
Machine screw pack
Mounting
Independent pair, surface, pull, push, double
egress
Arms
Single lever (push side), Double lever (Pull
Side), Double egress (Push/Pull)
Finishes/Colors/
Powder Coat
n
n
Anodized Aluminum
Anodized Dark Bronze
Customized installation templates or products may be available to solve unusual applications.
Contact LCN Product Support for assistance.
FINISH
HANDING
SU
RF
A
SU CE
RF MO
A
UN
SU CE
T
RF MO SI
AC
UN NG
LE
CO
E
T
NC MO SIM DO
EA UN
UL OR
T
CO LE
TA
I
D
N
NC
DE NEO
S
PE
U
CO EAL ING
ND S P
NC ED LE
DO
EN AIR
EA SI
T
LE MU OR
PA
D
IR
IN LTA
DE NE
HA
O
PE
ND
ND US
NO ED
EN PAI
R
NT
PA
HA
IR
ND
ED
ST
AN
DA
RD
AN
M
OD
ET
IZ
AL
ED
MOUNTING
COVER
phone: 877-671-7011
fax: 800-248-1460
n
www.allegion.com/us
* For double egress only.
AVAILABLE
NOT AVAILABLE
109
LCN Door Control Catalog
n
ARM FUNCTION
M
2 years
Fasteners
DA
R
GU D (
LA SIN
DO R
G
UB (DO LE L
LE UB EV
OF
EG LE ER
FS
)
ET RES LEV
ER
S
CE
PI
NT VO (PU )
SH
T
ER
/P
PI BUT
U
VO
T
HI LL)
T
NG
AR
M
E
AR
Handed
Warranty
Metal, Standard
RE
Handing
Cover
ST
AN
Certifications
n
009426 rev. 2/16
9560
Series
Senior Swing
4-1/2"
114 mm
Outgoing
Mounting details
6-3/4"
171 mm
Outgoing
Swing
Operator
5-3/4"
146 mm
1-7/16" from
top of door
Push Arm
Assembly
Top Jamb Independent
Pair Mounting
Offset
Pivot or
Butt
Hinges
Reveal
17" from
edge of door
1"
25 mm
Secondary Link
2-3/4"
70 mm
Swing Operator
Swing
Direction
Door
Door
Frame
8'0" Door Opening (Max.)
Exterior
Offset pivot/butt hinge, center pivot, push
Consult factory for all balanced door installations.
4-1/2"
114 mm
8'0" Door Opening (Max.)
11-1/2"
291 mm
17-3/8"
441 mm
2-3/4"
70 mm
Pull Channel
Swing Operator
Pull Arm
Assembly
Incoming
Offset
Pivot or
Butt
Hinges
Swing
6-3/4" 5-3/4"
171 mm 146 mm Operator
1"
25 mm
Pull Arm
Assembly
Pull Channel
1-15/16"
49 mm
Swing
Direction
Incoming
Interior
1-3/4"
44 mm
Interior
Door
Offset pivot/butt hinge, center pivot, pull
NOTE: Cannot be used with swing clear hinges, pocket pivots or balanced doors.
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Reveal for push
Should not exceed 10˝ (254 mm) for REGULAR ARM and 20˝ (508 mm) for LONG ARM
Reveal for pull
Should not exceed 4˝ (102 mm)
Reveal
Double egress installations should not exceed 4˝ (102 mm)
Head Frame
n
n
Minimum 1-3/4˝ (44 mm)
Face frame 6-3/4˝ (171 mm) total operator clearance
Top Rail
Minimum 2-3/4˝ (70 mm)
Opening and Closing Time
n
n
Variable by adjustments to the electronic control box
Maximum hold open time adjustable up to approximately 32 seconds.
Door Stop
Required for each door panel
System Diagram
See “AUTOMATIC OPERATORS” section page 51 for typical system wiring and page 53 for electrical data
Maximum Opening
Template allows 90 degree power opening and 90 degree manual opening
Notes:
• Push N' Go permits non-switch activation with a power boost providing additional latching force
• Electromechanical unit with microprocessor control
• Digital keypad for easy setup
• 72" header length is standard. Specify 65" - 98" max
• Pull, push, or double egress applications available
• Adjustable hold open period of 2 - 32 seconds in automatic or manual mode
• Actuators available separately, see pages 115-131
110
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Swing
Operator
17" from
edge of door
Butt
Hinges
17-3/8"
Pull Channel
11-1/2"
292 mm
Swing
Operator
1"
25 mm
Push Arm
Assembly
2-3/4"
70 mm
1"
25 mm Pull Arm
Assembly
Secondary
Link
Door
Frame
Push Arm
Assembly
Swing
Direction
Pull Channel
Door
Frame
Door
Swing
Direction
Rh double egress
NOTE: Cannot be used with swing clear hinges, pocket pivots or balanced doors.
The 18 plate is 6-3/4" thick and will need to be ordered 3-/1/2"
longer than the header to allow for mounting the angle brackets
to the vertical side jambs. See illustration below.
Mounting details
Top Jamb Independent
Pair Mounting
Door
Interior
Shim behind
plate by others
4-1/2"
Swing
Operator
5-3/4"
6-3/4"
Swing
Operator
1-15/16"
from top of door
Swing
Operator
5-3/4"
146 mm
6-3/4" 171 mm
Pull Arm
Assembly
4-1/2"
114 mm
5-3/4" 146 mm
48" Door Opening (Max.)
2-3/4"
70 mm
2-3/18" from bottom
of door stop
4-1/2"
114 mm
1-3/4"
44 mm
9560
Series
Senior Swing
The length of universal 18 plate will need to be
ordered 3-1/2" longer than the supplied header
Universal
18 plate
Door opening width
& length of header
1-3/4"
Hollow
Metal Frame
Install the plate securely to the frame
using field generated mounting holes
Bottom of frame rabbet
& botom of 18 plate
Stop
Hollow metal frame
Suggested Installation.
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Reveal for push
Should not exceed 10˝ (254 mm) for REGULAR ARM and 20˝ (508 mm) for LONG ARM
Reveal for pull
Should not exceed 4˝ (102 mm)
Reveal
Double egress installations should not exceed 4˝ (102 mm)
Head Frame
n
n
Minimum 1-3/4˝ (44 mm)
Face frame 6-3/4˝ (171 mm) total operator clearance
Top Rail
Minimum 2-3/4˝ (70 mm)
Opening and Closing Time
n
n
Variable by adjustments to the electronic control box
Maximum hold open time adjustable up to approximately 32 seconds.
Door Stop
Required for each door panel
System Diagram
See “AUTOMATIC OPERATORS” section page 51 for typical system wiring and page 53 for electrical data
Maximum Opening
Template allows 90 degree power opening and 90 degree manual opening
Notes:
• Push N' Go permits non-switch activation with a power boost providing additional latching force
• Electromechanical unit with microprocessor control
• Digital keypad for easy setup
• 72" header length is standard. Specify 65" - 98" max
• Pull, push, or double egress applications available
• Adjustable hold open period of 2 - 32 seconds in automatic or manual mode
• Actuators available separately, see pages 115-131
111
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9560
Series
Senior Swing
Accessories
Motor Gearbox
Mounting Brackets
9560-275
Mounting Bracket
9560-3454
Motor Gearbox
n
Senior swing
n
Handed
n
Driving mechanism for operator
Motor gearbox mounting
bracket for 2-3/4˝ center pivot
installations
n
n
Provides maximum 15 lbs
opening force
9560-334-1
Angled Bracket
9560-3018
Rear Mounting Bracket
Motor gearbox mounting
bracket
n
Mounting bracket for surface
applications
n
Includes 2 mounting brackets
n
Front bracket
n
Control Box
Header
9560-3572HL
Header
9560-3462
Control Box
Electronic controlling device for
Senior Swing
n
n
n
n
Pair door, two operators
pecify length 65˝ to 98˝
S
maximum
Standard
End Caps
9560-334
Header End Caps
n
With openings for wiring
9560-334-2
End Dress Plate
n
Metal finish end cap
112
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9560
Series
Senior Swing
Tracks
Accessories
9560-3038
Track
n
Non-handed
n
Standard
9560-73
Track End Cap
9560-3034
Roller
Black plastic end caps
n
Quiet low friction roller
assembly
n
Arms
9560-3077
Regular Arm Assembly
9560-3077T
Standard Arm
9560-3077L
Regular Long Arm Assembly
n
Handed
n
Handed
n
Track roller not included
n
n
9560-79
Linkage Assembly
9560-79LR
Linkage Assembly
n
Includes 77 main arm assembly
and 79 linkage assembly
9560 -77
Main Arm
n
15˝
n
Attaches to motor gearbox
n
Threaded rod attaches to door
n
n
Extends from main arm
n
Used for reveal 1" to 10"
n
n
Includes 77 main arm assembly
and 79LR linkage assembly
Handed
n
Handed
9560-3077PLCM
Standard Arm Assembly
Handed
Includes 3077 regular arm
assembly, 3038 track, and 3034
track roller
n
32˝
Threaded long rod attaches to
door
n
Extends from main arm.
n
Used for reveal 10˝ to 20˝
Installation Accessories
9560-12
Filler Plate
9560-11A
Spindle Plate
n
Hides bottom of motor gearbox
n
n
Completes header box
n
Cutout allows for motor gearbox
shaft
n
n
9560-18
Mounting Plate
n
Optional mounting plate for standard hollow metal door frames
Completes length of header box
Blank
n
Specify length 68-1/2˝ to 101-1/2˝ maximum when using angle brackets
Specify length
n
Specify length 65˝ to 98˝ maximum when using dress plates.
n
NOTE: The length of a universal 18 plate will need to be ordered 3-1/2˝ longer than
the supplied header when using angle brackets.
F or 2-3/4˝ offset pivot or butt
hinge installations
113
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
9560
Series
Senior Swing
Ordering Information
How-to-order 9560 Series
Operator will be shipped with:
- Standard motor gearbox (sf) (2 ea)
- Standard control box (sc)
- Metal cover (at specified length 72˝ standard)
- Regular arm (2 ea)
- 2-3/4˝ pivot point
- Machine screw pack
Specify hand
RH
LH
Specify header/length
HL__ (Specify length 65˝ to 98˝) regular or long arm
unless options listed below are selected.
Specify finish
Standard Anodized Finish ______________
Aluminum or Dark Bronze
Operator options
Mounting plate
Plate, ____ (Specify Length 65˝ to 101-1/2˝)
Arm
Standard Arm (2 ea) w/Standard Track (2 ea)
Double Egress - Includes Standard Arm w/Track (1 ea) & Regular Arm (1 ea)
Long Arm (3077L)
Table of sizes
Combined door width
65˝
98˝
1651mm
2489mm
9560
Minimum combined
Door width
Indicates recommended range of door width for operator.
NOTE: For all Senior Swing Series
Independent Pair – Width per leaf 30˝ minimum to 48˝ maximum.
114
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
8310 Series
The actuators and accessories on the following pages are to be used with LCN automatic operators. When
using actuators supplied by others, such as card readers, consult the factory.
The desired function, traffic patterns and physical design of the opening will determine the type of actuators used.
Generally, for twoway traffic, an actuator is required on both the interior and exterior side of the door. Each actuator
is packaged with a decal to be applied to the controlled door. Scanners operate on 12V or 24V AC/DC and may be
powered by the LCN electrohydraulic/electromechanical operators. The 7900 series control box requires separate
power supply for scanners. Actuators provide normally open (N.O.) dry contacts.
Auto Operator
Actuators &
Accessories
4-1/2˝ Surface and Flush
Mounts
Automatic Operator Actuators & Accessories
8310-856
Wall Mounted Actuator
8310-856T
Wall Mounted Actuator
Hardwired low voltage actuator with round, stainless steel touch plate in
4-1/2˝ (114mm) diameter
n
Engraved blue filled handicap symbol conforms to most accessibility codes
n
Same as the 8310-856, with the
added engraving of “Push to
Open”
n
Designed to mount in a flush or surface mount box (sold separately) in/on a
vertical surface near the controlled door
n
8310-868F
Flush Mount Box
n
ugged Plastic Box, 4-1/2˝
R
Round
Optional accessory - can be used
w/any 4-1/2˝ round actuator
n
Optional mounting in single gang electrical box (by others)
n
Heavy industrial grade components provide vandal resistant mounting and
weather resistant switch standard
n
Rugged Plastic Box, 4-1/2˝ Round
n
8310-844
Transmitter
8310-800
Weather/Trim Ring
8310-868S
Surface Mount Box
Optional accessory - can be used
w/any 4-1/2˝ round actuator
n
n
eather/Trim Ring, 4-1/2˝
W
Round
8310-865
Receiver
Transmitter, Wireless, 1 Channel,
9v battery included
n
Optional accessory - must be
used w/any 4-1/2˝ round plastic
mounting box
n
Use to convert standard wall
mount actuator to wireless
n
n
Receiver, Wireless, 1 Channel, w/
Sequencing Feature
n
Used in conjunction w/ Wireless
Actuators & Transmitter(s)
n
Requires 8310-865 Receiver
8310-874
Escutcheon
Tapered stainless steel escutcheon covers the gap between the wall and
the back of the wall plate actuators when mounted in electrical boxes (by
others) to minimize cart damage or vandalism
n
n
Optional accessory - can be used w/any 4-1/2˝ round actuator
n
Not to be used with wireless function
115
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
8310 Series
Auto Operator
Actuators &
Accessories
4-1/2˝ Surface and Flush
Mounts
Automatic Operator Actuators & Accessories
8310-3856WF
Flush Mount Kit
n
8310-3856WS
Surface Mount Kit
Actuator, 4-1/2˝ Round, Logo, Wireless
n
Includes 8310-856 Actuator, 8310-844 Transmitter, 8310-868F Flush Box,
8310-800 Weather/Trim Ring
n
n
Requires 8310-865 Receiver (not part of kit)
n
Actuator, 4-1/2˝ Round, Logo, Text, Wireless,
n
Includes 8310-856T Actuator, 8310-844 Transmitter, 8310-868F Flush Box,
8310-800 Weather/Trim Ring
Requires 8310-865 Receiver (not part of kit)
Actuator, 4-1/2˝ Round, Logo, Text, Wireless,
Includes 8310-856T Actuator, 8310-844 Transmitter, 8310-868S Surface
Box, 8310-800 Weather/Trim Ring
n
n
8310-3860T
Surface Mount Kit
n
Requires 8310-865 Receiver (not part of kit)
8310-3856TWS
Surface Mount Kit
n
n
Includes 8310-856 Actuator, 8310-844 Transmitter, 8310-868S Surface
Box, 8310-800 Weather/Trim Ring
n
n
8310-3856TWF
Flush Mount Kit
Actuator, 4-1/2˝ Round, Logo, Wireless
Requires 8310-865 Receiver (not part of kit)
8310-3860TW
Surface Mount Kit
Actuator Package, 4-1/2˝ Round
n
Includes 8310-856T (2) Wall Mount Actuator, 8310-868S Surface Mount
Box.
n
NOTE: Weather/Trim Rings are sold separately
116
Actuator Package, 4-1/2˝ Round, Wireless
Includes 8310-856T (2) Wall Mount Actuator, 8310-868S (2) Surface
Mount Box, 8310-800 (2) Weather/Trim Ring, 8310-844 (2) Transmitter,
8310-865 Receiver
n
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
8310 Series
Auto Operator
Actuators &
Accessories
Automatic Operator Actuators & Accessories
6˝ Surface and Flush
Mounts
8310-852T
Wall Mounted Actuator
8310-852
Wall Mounted Actuator
ardwired low voltage actuator with round, stainless steel touch plate in 6˝
H
(152mm) diameter
n
Engraved blue filled handicap symbol conforms to most accessibility codes
n
Same as the 8310-852, with the
added engraving of “Push to
Open”
n
Designed to mount in a flush or surface mount box (sold separately) in/on a
vertical surface near the controlled door
n
Optional mounting in single gang electrical box (by others) or double gang
box (4˝ x 4˝ by others)
n
Heavy industrial grade components provide vandal resistant mounting and
weather resistant switch standard.
n
8310-852TWP
Wall Mounted Actuator
8310-852WP
Wall Mounted Actuator
Wireless, low profile, low voltage actuator with round, stainless steel touch
plate in 6˝ (152mm) diameter
n
Same as the 8310-852WP, with
the added engraving of “Push to
Open”
n
Engraved blue filled handicap symbol conforms to most accessibility codes
n
8310-869F
Flush Mount Box
Rugged Plastic Box, 6˝ Round
n
Optional accessory - can be
used w/ any 6˝ round actuator
n
Surface mount box includes integral transmitter w/ battery and actuator
switch
n
Heavy industrial grade components provide vandal resistant mounting and
weather resistant switch standard
n
Requires 8310-865 Receiver
n
8310-869S
Surface Mount Box
Rugged Plastic Box, 6˝ Round
n
Optional accessory - can be used
w/ any 6˝ round actuator
8310-802
Weather/Trim Ring
n
n
8310-8/444
Transmitter
Transmitter, Wireless, 1 Channel,
9v battery included
Use to convert standard wall
mount actuator to wireless
n
n
Receiver, Wireless, 1 Channel, w/
Sequencing Feature
n
Used in conjunction w/ Wireless
Actuators & Transmitter(s)
Tapered stainless steel escutcheon covers the gap between the wall and
the back of the wall plate actuators when mounted in electrical boxes (by
others) to minimize cart damage or vandalism
n
n
Requires 8310-865 Receiver
n
Optional accessory - Can be used w/ any 6˝ round actuator
Not to be used with wireless function
n
117
LCN Door Control Catalog
phone: 877-671-7011
Optional accessory - can be
used w/ any 6˝ round plastic
mounting box.
n
8310-876
Escutcheon
8310/-865
Receiver
n
lastic Weather/Trim Ring, 6˝
P
Round
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
8310 Series
Auto Operator
Actuators &
Accessories
6˝ Surface and Flush
Mounts
Automatic Operator Actuators & Accessories
8310-3852WF
Flush Mount Kit
n
8310-3852WS
Surface Mount Kit
6˝ Round, Logo, Wireless
n
Includes 8310-852 Actuator, 8310-844 Transmitter, 8310-869F Flush Box,
8310-802 Weather/Trim Ring
n
n
Requires 8310-865 Receiver (not part of kit)
n
Requires 8310-865 Receiver (not part of kit)
8310-3852TWS
Surface Mount Kit
6˝ Round, Logo, Text, Wireless,
n
Includes 8310-852T Actuator, 8310-844 Transmitter, 8310-869F Flush Box,
8310-802 Weather/Trim Ring
n
n
Includes 8310-852 Actuator, 8310-844 Transmitter, 8310-869S Surface
Box, 8310-802 Weather/Trim Ring
n
n
8310-3852TWF
Flush Mount Kit
6˝ Round, Logo, Wireless,
Requires 8310-865 Receiver (not part of kit)
Includes 8310-852T Actuator, 8310-844 Transmitter, 8310-869S Surface
Box, 8310-802 Weather/Trim Ring
n
118
6˝ Round, Logo, Text, Wireless,
n
Requires 8310-865 Receiver (not part of kit)
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
8310 Series
Auto Operator
Actuators &
Accessories
1-1/2˝ x 4-3/4˝ Surface
and Flush Mounts
NOTE: LCN recommends for all jamb mount actuators be used on an interior installation only.
Automatic Operator Actuators & Accessories
8310-818T
Jamb Mounted Actuator
8310-818
Jamb Mounted Actuator
Hardwired low voltage actuator with rectangular stainless steel touch
plate.
Same as the 8310-818, with the
added engraving of “Push to
Open”
n
n
n
1-1/2˝ (38mm) wide by 4-3/4˝ (121mm)
n
Engraved blue filled handicap symbol conforms to most accessibility codes
Designed to mount in a frame cutout (template provided) projecting
approximately 1/2˝ (12mm) from the frame
n
Optional mounting in surface or flush mount box (sold separately)
n
Heavy industrial grade components provide vandal resistant mounting and
weather resistant switch standard
n
8310-819F
Flush Mount Box
n
n
Rugged Plastic Jamb Box
1 - 1/2˝ x 4-3/4˝ rectangle,
optional accessory - can be used
w/ any 1-1/2˝ x 4-3/4˝ jamb
mount actuator
n
Rugged Plastic Jamb Box
n
1-1/2˝ x 4-3/4˝, rectangle
8310-865
Receiver
8310-844J
Transmitter
8310-819S
Surface Mount Box
Wireless, 1 Channel, Jamb Mount,
3v battery included
n
Optional accessory - can be
used w/ any 1-1/2˝ x 4-3/4˝
jamb mount plastic mounting
box
n
Used to convert standard jamb
mount actuator to wireless when
used w/ 819F or 819S boxes.
Requires 8310-865 Receiver
(interior use only)
n
phone: 877-671-7011
fax: 800-248-1460
n
www.allegion.com/us
Used in conjunction w/ Wireless
Actuators & Transmitter(s)
n
119
LCN Door Control Catalog
n
Wireless, 1 Channel, w/
Sequencing Feature
n
n
009426 rev. 2/16
8310 Series
Auto Operator
Actuators &
Accessories
1-1/2˝ x 4-3/4˝ Surface
and Flush Mounts
NOTE: LCN recommends for all jamb mount actuators be used on an interior installation only.
Automatic Operator Actuators & Accessories
8310-3818WF
Flush Mount Kit
8310-3818WS
Surface Mount Kit
n
Actuator, 1-1/2˝ x 4-3/4˝ Rectangle, Logo, Wireless
n
Actuator, 1-1/2˝ x 4-3/4˝ Rectangle, Logo, Wireless
n
Includes 8310-818 Actuator, 8310-844J Transmitter, 8310-819F Flush Box
n
Includes 8310-818 Actuator, 8310-844J Transmitter, 8310-819S Surface Box
n
Requires 8310-865 Receiver (not part of kit)
n
Requires 8310-865 Receiver (not part of kit)
8310-3818TWF
Flush Mount Kit
8310-3818TWS
Surface Mount Kit
n
Actuator, 1-1/2˝ x 4-3/4˝ Rectangle, Logo, Wireless
n
n
Includes 8310- 818T Actuator, 8310-844J Transmitter, 8310-819F Flush Box
n
n
Requires 8310-865 Receiver (not part of kit)
Actuator, 1-1/2˝ x 4-3/4˝ Rectangle, Logo, Wireless
Includes 8310-818T Actuator, 8310-844J Transmitter, 8310-819S Surface
Box
n
Requires 8310-865 Receiver (not part of kit)
8310-3822TW
Surface Mount Kit
8310-3822T
Surface Mount Kit
n
Actuator Package, 1-1/2˝ x 4-3/4˝, Jamb Mount
n
Actuator Package, 1-1/2˝ x 4-3/4˝, Wireless, Jamb Mount
n
Includes 8310-818T (2) Jamb Mount Actuator, 8310-819S (2)
n
Includes 8310-818T (2) Jamb Mount Actuator, 8310-819S (2)
n
Surface Mount Box
n
Surface Mount Box, 8310-844J (2) Jamb Mount Transmitter, 8310-865
Receiver
120
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
8310 Series
Automatic Operator Actuators & Accessories
Auto Operator
Actuators &
Accessories
8310-853T
Wall Mounted Actuator
8310-853
Wall Mounted Actuator
ardwired low voltage actuator with stainless steel touch plate in 4-3/4˝
H
(121mm) square
n
4-3/4˝ Square Surface
and Flush Mounts
Engraved blue filled handicap symbol conforms to most accessibility codes
n
Same as the 8310-853, with the
added engraving of “Push to
Open”
n
Designed to mount in a flush or surface mount box (sold separately) in/on a
vertical surface near the controlled door
n
Optional mounting in single gang electrical box (by others) or double gang
box (4˝ x 4˝ by others) or on an 8310-866 bollard post
n
Heavy industrial grade components provide vandal resistant mounting and
weather resistant switch standard
n
8310-853WP
Surface Mounted Actuator
8310-853TWP
Surface Mounted Actuator
Wireless, low profile, low voltage actuator with round, stainless steel touch
plate in 4-3/4˝ (121mm) square
n
Same as the 8310-853WP, with
the added engraving of “Push to
Open”
n
Engraved blue filled handicap symbol conforms to most accessibility codes
n
8310-867F
Flush Mount Box
n
Rugged Plastic Box
n
4-3/4˝ Square
Optional accessory - can be used
w/ any 4-3/4˝ square actuator
n
Surface mount box includes integral transmitter w/ battery and actuator
switch
n
Heavy industrial grade components provide vandal resistant mounting and
weather resistant switch standard
n
Requires 8310-865 Receiver
n
8310-867S
Surface Mount Box
ugged Plastic Box, 4-3/4˝
R
Square
n
Optional accessory - can be used
w/ any 4-3/4˝ square actuator
n
8310-844
Transmitter
Wireless, 1 Channel, 9v battery
included
Use to convert standard wall
mount actuator to wireless
n
n
Plastic Weather Ring,
4-3/4˝ Square
n
Optional accessory - can be used
w/ any 4-3/4˝ square plastic
mounting box
n
8310-813
Touchless Wall Mounted Actuator
8310-865
Receiver
n
8310-801
Weather/Trim Ring
Wireless, 1 Channel, w/
Sequencing Feature
n
n
Used in conjunction w/ Wireless
Actuators & Transmitter(s)
n
ardwired low voltage actuator with plastic plate in 4-3/4˝ (121mm)
H
square
Optional mounting in single gang electrical box (by others) or double gang
box (4˝ x 4˝ by others)
n
Requires 8310-865 Receiver
121
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
8310 Series
Auto Operator
Actuators &
Accessories
Accessories
4-3/4˝ Square Surface
and Flush Mounts
Automatic Operator Actuators & Accessories
8310-3853WF
Flush Mount Kit
n
8310-3853WS
Surface Mount Kit
Actuator, 4-3/4˝ Square, Logo, Wireless
n
Includes 8310-853, 8310-844 Transmitter, 8310-867F Flush Box, 8310-801
Weather/Trim Ring
n
n
Requires 8310-865 Receiver (not part of kit)
n
Requires 8310-865 Receiver (not part of kit)
8310-3853TWS
Surface Mount Kit
Actuator, 4-3/4˝ Square, Logo, Text, Wireless
n
Includes 8310-853T, 8310-844 Transmitter, 8310-867F Flush Box,
8310-801 Weather/Trim Ring
n
n
Includes 8310-853, 8310-844 Transmitter, 8310-867S Surface Box,
8310-801 Weather/Trim Ring
n
n
8310-3853TWF
Flush Mount Kit
Actuator, 4-3/4˝ Square, Logo, Wireless
Requires 8310-865 Receiver (not part of kit)
n
8310-3857T
Surface Mount Kit
Actuator, 4-3/4˝ Square, Logo, Text, Wireless
Includes 8310-853T, 8310-844 Transmitter, 8310-867S Surface Box,
8310-801 Weather/Trim Ring
n
Requires 8310-865 Receiver (not part of kit)
8310-3857TW
Surface Mount Kit
n
Actuator Package, 4-3/4˝ Square
n
n
Includes 8310-853T (2) Wall Mount Actuator, 8310-867S (2)
n
n
Surface Mount Box
Actuator Package, 4-3/4˝ Square
Includes 8310-853T (2) Wall Mount Actuator, 8310-867S (2) Surface Mount
Box, 8310-801 (2) Weather/Trim Ring, 8310-844 (2) Transmitter,
8310-865 Receiver
NOTE: Weather/Trim Rings are sold separately
122
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
8310 Series
Auto Operator
Actuators &
Accessories
4-3/4˝ Dual Square
Surface and Flush
Mounts
Automatic Operator Actuators & Accessories
8310-867F
Flush Mounted Actuator
8310-855
Dual Wall Mounted Actuator
Hardwired low voltage actuator with dual rectangle, stainless steel touch
plate in 4-3/4˝ (121mm) square
n
Engraved blue filled handicap symbol w/ text, conforms to most
accessibility codes
ugged Plastic Box, 4-3/4˝
R
Square
n
Optional accessory - can be used
w/ any 4-3/4˝ square actuator
n
n
8310-867S
Surface Mount Box
n
ugged Plastic Box, 4-3/4˝
R
Square
Optional accessory -can be used
w/ any 4-3/4˝ square actuator
n
Designed to mount in a flush or surface mount box (sold separately) in/on a
vertical surface near the controlled door
n
n
Optional mounting in double gang box (4˝ x 4˝ by others) or on an 8310866 bollard post
Heavy industrial grade components provide vandal resistant mounting and
weather resistant switch standard
n
8310-844
Transmitter
8310-801
Weather/Trim Ring
n
lastic Weather Ring, 4-3/4˝
P
Square
Optional accessory - can be used
w/ any 4-3/4˝ square plastic
mounting box
n
8310-865
Receiver
Transmitter, Wireless, 1 Channel,
9v battery included
n
Use to convert standard wall
mount actuator to wireless
n
n
Receiver, Wireless, 1 Channel, w/
Sequencing Feature
n
Used in conjunction w/ Wireless
Actuators & Transmitter(s)
n
Requires 8310-865 Receiver
123
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
8310 Series
Auto Operator
Actuators &
Accessories
4-3/4˝ Dual Square
Surface and Flush Mounts
Automatic Operator Actuators & Accessories
8310-3855WF
Flush Mount Kit
n
8310-3855WS
Surface Mount Kit
Actuator, 4-3/4˝ Square, Logo, Text, Dual Vestibule, Wireless
n
Includes 8310-855 Actuator, 8310-844 Transmitter (2), 8310-867F Flush
Box, 8310-801 Weather/Trim Ring
n
n
Requires 8310-865 Receiver (2) (not part of kit)
n
Requires 8310-865 Receiver (2) (not part of kit)
8310-3853TWB
Actuator, Bollard Mount Kit
4-3/4˝ Square w/ Logo, Wireless actuator
n
Use w/ 8310-866 Bollard (not included) - Includes 8310- 853 actuator,
8310-844 transmitter
n
n
Includes 8310-855 Actuator, 8310-844 Transmitter (2), 8310-867S Surface
Box, 8310-801 Weather/Trim Ring
n
n
8310-3853WB
Actuator, Bollard Mount Kit
Actuator, 4-3/4˝ Square, Logo, Text, Dual Vestibule, Wireless
Requires 8310-865 Receiver (not part of kit)
n
124
4-3/4˝ Square w/ Logo, Text, Wireless actuator
Use w/8310-866 Bollard (not included) - Includes 8310- 853T actuator,
8310-844 Transmitter
n
Requires 8310-865 Receiver (not part of kit)
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
8310 Series
Auto Operator
Actuators &
Accessories
36˝ x 6˝ Full Length
Actuators
Automatic Operator Actuators & Accessories
8310-836T
Full Length Actuator (FLA)
n
n
n
8310-836TW
Flush Length Actuator (FLA)
ardwired low voltage actuator with stainless steel touch plate with 36˝ x
H
6˝ activation surface
Blue handicap symbol conforms with most accessibility codes
Same as the 8310-836T with a
built in wireless transmitter and
3v battery
n
Use in conjunction with 8310-865
Receiver (not included)
n
Added “PUSH TO OPEN” lettering for enhanced identification
Designed to meet California building codes and increase accessibility for
wheelchair bound entrants
8310-865
Receiver
Wireless, 1 Channel,
w/Sequencing Feature
n
Used in conjunction w/ Wireless
Actuators & Transmitter(s)
n
n
n
Can easily be mounted to any flat surface or a bollard post
8310-844
Transmitter
Wireless, 1 Channel, 9v Battery
included.
n
Used to convert standard
actuators to wireless
n
n
n
8310-3836T
FLA Bollard Mount Kit
8310-866FLA
FLA Bollard Post
powder coated steel 42˝ x 4˝ x
A
6˝: Bollard Post, mounting base
pre prepped for the 8310-836T
n
36˝ x 6˝ Actuator with 8310866FLA Bollard for wired
applications
Includes 8310-866 CAP, 2
mounting screws & spacer for
installation
Recommended for exterior
application with 8310-836T
n
36˝ x 6˝ Actuator with 8310866FLA Bollard and 8310-844
wireless Transmitter
Transmitter requires 8310-865
Receiver (not included)
n
Requires 8310-865 Receiver
8310-3836TW
FLA Bollard Mount Kit
n
n
Used with the 866FLA bollard
post
n
125
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
8310
Series
Auto Operator
Sensors &
Accessories
Accessories
The sensors and accessories on the following pages are to be used only with LCN automatic operators.
When using sensors supplied by others, consult the factory.
The desired function, traffic patterns and physical design of the opening will determine the type of sensors used.
Sensors
Automatic Operator Sensors & Accessories
8310-804-1
Door Mount Safety Sensor
Contains one active sensor
module to detect obstruction(s)
on leading edge of door
n
8310-804-2
Door Mount Safety Sensor
8310-854
Header Mount Activation Sensor
Contains two active sensor
modules to detect obstruction(s)
on full face of door
n
Activation Sensor, 'K' Band
Technology
Safety Sensor, 'Diffused Infrared'
Technology
n
n
Used to detect objects either
approaching or moving away from
sensor
n
Uses standard 'one way' detection
but additional detection can be
programmed
n
Optional 8310-859 Handheld
Remote Control can be used to
program 8310-854 sensor from a
distance
n
8310-877S
Header Mount Safety Sensor
Spacer
Required when 8310-804-1 or
8310-804-2 Door Mount Safety
n
8310-859
Handheld Remote Control
8310-846
Header Mount Harness
Used to program 8310-877 Header
Mount Safety Sensor or 8310-854
Header Mount Motion Sensor
n
8310-877
Header Mount Safety Sensor
Used to detect obstructions
during door open and door closed
position
n
Nine selectable patterns
n
8310-859 Handheld Remote
Control required to program 8310877 sensor from a distance
n
Includes 8310-846 Harness
n
8310-847
Door Mount Harness
Comes with 8310-877 Header
Mount Safety Sensor
n
Spacers are used w/ 8310-877
Header Mount Safety Sensor
Used with 8310-804-1 or 8310804-2 Door Mount Safety Sensor,
must order separately.
n
Used with Senior Swing only, must
order separately
n
n
126
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
8310
Series
Auto Operator
Sensors &
Accessories
Packages
Automatic Operator Sensors & Accessories
8310-3881L
Safety Sensor Package
n
Activation/Safety Sensor Package, Single Door
Includes 8310-854 (2) Header Mount Activation Sensor, 8310-877 Header Mount Safety Sensor, 8310-877S
Header Mount Spacer, 8310-804-2 Door Mount
n
n
Safety Sensor (approach side), 8310-847 Harness (Used with Senior Swing only)
8310-3881
Safety Sensor Package
n
Activation/Safety Sensor Package, Single Door
Includes 8310-854 (2) Header Mount Activation Sensor, 8310-877 Header Mount Safety Sensor, 8310-877S
Header Mount Spacer, 8310-847 Harness, 8310- 804-2 (2) Door Mount Safety Sensor (approach/safety side)
(Used with Senior Swing only)
n
8310-3883
Safety Sensor Package
n
Activation/Safety Sensor Package, Low Energy Convenience
n
Single Door, Includes 8310-804-1 Door Mount Safety
Sensor (approach side), 8310-805C Door Position Switch (Concealed), 8310-845 Programmable Relay
Module (Used with Senior Swing only)
n
127
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
8310
Series
Auto Operator
Sensors &
Accessories
Accessories
Packages
Automatic Operator Sensors & Accessories
8310-3882L
Safety Sensor Package
n
Activation/Safety Sensor Package, Double Door
Includes 8310-854 (2) Header Mount Activation Sensor, 8310-877 Header Mount Safety Sensor, 8310-877S Header
Mount Spacer, 8310-847 (2) Harness, 8310-804-2 (2) Door Mount Safety Sensor (approach side) (Used with Senior
Swing only)
n
NOTE: Not for use with Double Egress
8310-3882
Safety Sensor Package
n
Activation/Safety Sensor Package, Double Door
Includes 8310-854 (2) Header Mount Sensor, 8310-877 Header Mount Sensor, 8310-877S Header Mount
Spacer, 8310-847 (2) Harness, 8310-804-2 (4) Door Mount Safety Sensor (approach/safety side) (Used with
Senior Swing only)
n
NOTE: Not for use with Double Egress
8310-3891
Safety Sensor Package
n
8310-3892
Safety Sensor Package
Activation/Safety Sensor Package, Health Care I, Simultaneous Pair
Activation/Safety Sensor Package, Health Care II, Independent Pair,
Includes 8310-877 (2) Header Mount Sensor, 8310-877S (2) Header
Mount Spacer, 8310-804-2 (4) Door Mount Sensor (approach/safety
side), 8310-847 (2) Harness (Used with Senior Swing only)
n
Includes 8310-877 Header Mount Sensor, 8310-877S Header Mount
Spacer, 8310-804-2 (4) Door Mount Sensor (approach/ safety side),
8310-847 (2) Harness (Used with Senior Swing only)
n
NOTE: Not for use with Double Egress
128
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
8310
Series
Auto Operator
Sensors &
Accessories
Automatic Operator Sensors & Accessories
8310-805C
Door Position Switch
8310-805
Door Position Switch
n
Surface mount
n
Used when 8310-804-1 or
8310-804-2 Door Mounted
Safety Sensor and 8310-845
Relay Module is installed
in conjunction w/ either a
electrohydraulic, pneumatic or
Benchmark Automatic Operator
n
Disables approach side sensor
when door is closed
Concealed
n
Used when 8310-804-1 or 8310804-2 Door Mounted Safety
Sensor and 8310-845 Relay
Module is installed in conjunction
w/ either a electrohydraulic,
pneumatic or Benchmark
Automatic Operator
n
n
8310-854ECA
Drop Ceiling Bracket
8310-854ERA
Protective Cover
Bracket used w/ 8310-854
Header Mount Activation Sensor
Optional
Optional accessory - Used to
remotely power any 24v sensor/
receiver
8310-3803
Wireless Conversion Kit
8310-3809
Wireless Conversion Kit
Cover used w/ 8310-854 Header
Mount Activation Sensor
n
n
Jamb mount, 3v
Converts standard jamb actuator
to wireless version
n
Includes 8310-865 Receiver, 8310844J (2) Jamb Mounted
n
Transmitter - Requires 8310-819S
or 8310-819F Jamb Box
n
n
Jamb mount, 9v
Converts standard wall mount
actuator to wireless version
n
Includes 8310-865 Receiver, 8310844 (2) Wall Mount Transmitter
n
Requires Surface or Flush Box and
Weather Ring
n
8310-3888
Harness
Used w/ 7901, 7902, 7981, 7982
Control Boxes.
n
Includes 8310-3888 Safety
Module Harness. Required when
8310-877 Header Mount Safety
Sensor is used w/ Pneumatic
n
Optional accessory - Used to
remotely power any 24v sensor/
receiver
n
n
8310-3889
Safety Module Kit
24v, plug in
n
n
Optional
n
Hardwired
8310-824P
Transformer
Disables approach side sensor
when door is closed
n
n
8310-824
Transformer, 24v,
n
Safety module, service part
Safety Module Harness for
pneumatic control box
n
Automatic Operators (2610,
4810, 4820 or 4840 Series)
n
129
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
8310
Series
Auto Operator
Sensors &
Accessories
Accessories
Automatic Operator Sensors & Accessories
8310-861
Transmitter
Wireless
n
1 Channel, Handheld, 3v.
Requires 8310-865 Receiver
n
Wireless
n
8310-866
Bollard Post
8310-866CAP
Bollard Post
A powder coated steel
42˝ x 4˝ x 6˝ Bollard Post,
Mounting Base and 8310-866CAP
n
2 Channel, Handheld, 3v.
Requires 8310-865 Receiver
n
n
8310-863
Transmitter
8310-862
Transmitter
8310-864
Transmitter
Wireless
n
3 Channel, Handheld, 3v.
Requires 8310-865 Receiver
n
Wireless
4 Channel, Handheld, 3v.
Requires 8310-865 Receiver.
n
Plastic Cap, Protective Cover,
Service Part for 8310-866 Bollard
Post
n
Actuator cut out accepts
8310-3853WB or 8310- 3853TWB
wireless actuators 4-3/4˝ square
hard wired actuator
n
130
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
8310
Series
Auto Operator
Sensors &
Accessories
Automatic Operator Actuators & Accessories
Type, 3 Position (On/Off/HoldOpen)
n
Optional switch used w/
Senior Swing, Benchmark, or
4630/4640 Operators with (CS)
option
n
8310-887
Retrofit Cable
Type, 3 Position (On/Off/HoldOpen)
n
AC, 120v, Optional filter used w/
Senior Operators to reduce ‘line
noise’
n
Optional switch w/ Senior Swing,
Benchmark, or 4630/4640
n
n
8310-845
Programmable Relay Module
Used to sequence door operation
in Senior Swing and Benchmark
for hard wired applications
n
Operators with (CS) option
8310-3134
Retrofit Cable Kit
Allows newer style Senior
Swing digital control to be
activated by existing switches
when replacing older control
purchased prior to September,
2006
n
8310-807
Line Filter
8310-806R
Rocker Switch
8310-806K
Key Switch
Allows newer style Senior Swing
Digital Control to be activated by
existing switches when replacing
older control purchased prior to
September, 2006.
n
Also includes cables to allow
Safety Sensors to activate
n
Includes 8310-887 plus Safety
Sensor Cables
n
131
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
132
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
PAH 60
Holder
Features & Ordering
Information
The PAH 60 is recommended for use on the inactive leaf of a pair of doors where the active
leaf has a door closer installed.
Handing
Handed
Fasteners
Butt Hinges
Should not exceed 5˝ (127 mm) in width
Finishes/Colors/
Powder Coat
Auxiliary Stop
Recommended at hold-open point
Top Rail
Minimum 2˝ (51 mm)
Rabbet Depth
Minimum 1-1/4˝ (32 mm)
Maximum opening
n Hold-open points up to 180°
n H
old-open point adjustable at the
Wood and machine screw pack
n
n
n
n
n
n
n
n
soffit shoe
n
Aluminum (689)
Statuary Bronze (690)
Light Bronze (691)
Black (693)
Dark Bronze (695)
Brass (696)
Custom colors optional
Optional SRI primer - powder coat only
Optional plated finishes
How-to-order PAH 60 Holder
6-1/8"
156 mm
1. Specify hand
RH
LH
2. Select finish
Standard Powder Coat __________
Aluminum, Dark Bronze, Statuary,
Light Bronze, Black, Brass
3-3/4"
94 mm
8-11/16"
221 mm
3. Optional arm finish
Custom Powder Coat (RAL) __________
Plated Finish, US __________
SRI Primer __________
2-11/16"
68 mm
3/4"
19 mm
1-7/8"
48 mm
1-1/4"
32 mm
1-3/4"
44 mm
1
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
Notes
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________
2
LCN Door Control Catalog
phone: 877-671-7011
n
fax: 800-248-1460
n
www.allegion.com/us
n
009426 rev. 2/16
About Allegion
Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security.
As a $2 billion provider of security solutions for homes and businesses, Allegion
employs more than 7,800 people and sells products in more than 120 countries
across the world. Allegion comprises 23 global brands, including strategic
brands CISA®, Interflex®, LCN®, Schlage® and Von Duprin®.
For more, visit www.allegion.com
© 2016 Allegion
009426, Rev. 2/16
allegion.com/us
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2016:02:03 15:39:38-06:00 Modify Date : 2016:08:03 13:35:44-05:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2016:08:03 13:35:44-05:00 Format : application/pdf Document ID : uuid:cfe7c6c6-6800-d648-a943-aeb24ea5dc3b Instance ID : uuid:53a5025c-66a0-204b-a0ce-6ce074f98c89 Page Count : 400EXIF Metadata provided by EXIF.tools