LDL Technology 14119 TCU with TPMS transmitting at 433.92 MHz User Manual C3131320010
LDL Technology TCU with TPMS transmitting at 433.92 MHz C3131320010
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2665586 |
| Application ID | KYKqMzK1e2M7BKzfVi5rZw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 102.08kB (1275984 bits) |
| Date Submitted | 2015-07-03 00:00:00 |
| Date Available | 2015-12-30 00:00:00 |
| Creation Date | 2015-06-18 16:06:13 |
| Producing Software | LibreOffice 4.1 |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | C3131320010 |
| Document Creator | Writer |
| Document Author: | Thibault BENARD |
Mounting procedure TCU CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Diffusion : Internal Status : Confidential Ref : C3131320010 Version : A1 External Limited ✘ Extended ✘ Mounting procedure TCU Reference : C3131320010 Version A1 Internal Approval Name and Department Date Author Check Approver D. LUCE (MD) S.BAIGET (SY) P. GABAUDAN (PM) 13/04/15 15/04/15 15/04/15 Signature COMPANY NAME C3131320010-A1-TCU_Mounting_Specification.odt DATE SIGNATURE LDL Technology SAS – Toulouse – France Copyrights 2015 1/ 16 Mounting procedure TCU Ref : C3131320010 Version : A1 MODIFCATION LIST: CONFIDENTIAL INFORMATION Modification date 13/04/2015 17/06/2015 Chapter / pages All §8 Comments Creation Modification of regulatory notices Author D.LUCE M.GUERIN This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Version A0 A1 C3131320010-A1-TCU_Mounting_Specification.odt LDL Technology SAS – Toulouse – France Copyrights 2015 2/ 16 Mounting procedure TCU Ref : C3131320010 Version : A1 CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Chapter : 1. PURPOSE..................................................................................................................................4 2. TCU PRODUCT DESCRIPTION................................................................................................4 2.1. Part Numbers.......................................................................................................................4 2.2. External Description.............................................................................................................4 3. MAIN FEATURES...................................................................................................................... 6 3.1. Electronic Features..............................................................................................................6 3.2. Mechanical Features........................................................................................................... 6 3.3. Connector Pin Out............................................................................................................... 6 4. TCU MOUNTING INTERFACE..................................................................................................7 5. TCU MOUNTING RECOMMENDATIONS.................................................................................7 6. TCU POWER SUPPLY CONNECTION .....................................................................................9 7. TCU LOCATING RECOMMENDATIONS................................................................................11 8. FCC/IC Regulatory notices.......................................................................................................13 8.1. Modification statement:......................................................................................................13 8.2. Interference statement:......................................................................................................13 8.3. Radiation Exposure Statement: .........................................................................................13 8.4. FCC Class B digital device notice..................................................................................... 14 9. APPENDIX................................................................................................................................14 C3131320010-A1-TCU_Mounting_Specification.odt LDL Technology SAS – Toulouse – France Copyrights 2015 3/ 16 Mounting procedure TCU 1. Ref : C3131320010 Version : A1 PURPOSE CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. This document is the Mounting procedure of the TCU. TCU is a part of a Tire Pressure Monitoring System. The Telematic Control Unit (TCU) collects information on the vehicle and transmits it over the GSM network to a back-end server. It can capture data from CAN, GPS and TPMS. 2. TCU PRODUCT DESCRIPTION. 2.1. PART NUMBERS TCU Part Number Region Model 13 132 0000 Europe Middle East Africa (EMEA) 13 123 13 144 0000 Europe Middle East Africa (EMEA) 13 144 14 119 0000 North America (NA) 14 119 15 046 0000 North America (NA) 14 119 2.2. EXTERNAL DESCRIPTION Part Material Characteristics all electronic parts 1 Housing PBT GF20 - UL94 V0 Black 1 Cover PBT GF20 - UL94 V0 Black 1 10 Ways FCI PBT GF20 - UL94 V0 Black Steel C 1018 EPDM Black Stainless steel A2 NA (assembly) Black TCU 8 Screws 3 Silent-blocks 3 Spacers 1 Nitto Vent C3131320010-A1-TCU_Mounting_Specification.odt LDL Technology SAS – Toulouse – France Copyrights 2015 4/ 16 Mounting procedure TCU Ref : C3131320010 Version : A1 screw CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Cover 10 Ways Delphi Connector APEX 150 Nitto vent Silent block Housing Spacer screw C3131320010-A1-TCU_Mounting_Specification.odt LDL Technology SAS – Toulouse – France Copyrights 2015 5/ 16 Mounting procedure TCU 3. MAIN FEATURES CONFIDENTIAL INFORMATION 3.1. This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Ref : C3131320010 Version : A1 ELECTRONIC FEATURES Power supply (5A fuse protected) 7 to 32 V Operating current 1A Temperature operating range -40°C to 85°C Storage temperature range 0 to 30°C Legal Regulations R&TTE (99/5/EC) FCC/IC PTCRB E marking Antennas (GSM, GPS and RF) Internal 3.2. MECHANICAL FEATURES 3.3. Total Mass 256 g Dimensions (L x W x H) 123 x 120 x 50 mm Connector (10 Ways) FCI - Delphi Connector APEX 150 Tightness IP 68 & IP69K Mounting LDL Brackets (see §4) Wiring LDL harnesses (see §6) CONNECTOR PIN OUT Pin number Mnemonic Function CAN HI CAN High Reserved CAN LO CAN Low BBM+ BBM positive IGN Ignition status (KL15) Reserved VBAT Vehicle battery positive (KL30) Reserved GND Vehicle battery negative (KL31) 10 TEMP BBM temperature C3131320010-A1-TCU_Mounting_Specification.odt LDL Technology SAS – Toulouse – France Copyrights 2015 6/ 16 Mounting procedure TCU 4. Ref : C3131320010 Version : A1 TCU MOUNTING INTERFACE. CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. The TCU is mounted on a plane surface fixed on the vehicle frame. The TCU has 3 mounting points equipped with silent blocks. The TCU must be fixed on a support (available on demand). This support (TCU interface) is defined in the appendix. 5. TCU MOUNTING RECOMMENDATIONS Screws (not provided by LDL) must be tightened @ 4,5 Nm +/-0,5 Nm. It's recommended to use an elastic washer (Belleville type) between screw head and silent block with spacer. Stainless steel is recommended. M6 bolts are recommended, the screw for a fixation on a base plate fixation in thickness 2mm must have a length equal or higher than 20mm. C3131320010-A1-TCU_Mounting_Specification.odt LDL Technology SAS – Toulouse – France Copyrights 2015 7/ 16 Mounting procedure TCU Ref : C3131320010 Version : A1 CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Nut M6 Interface TCU Washer Screw M6 TCU Assembled onto support TCU Assembly Universal fixation kit can be provided by LDL. It consists of a base plate and an extension plate. A combination of these parts is able to fit all vehicle types. C3131320010-A1-TCU_Mounting_Specification.odt LDL Technology SAS – Toulouse – France Copyrights 2015 8/ 16 Mounting procedure TCU Ref : C3131320010 Version : A1 CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. LDL TCU bracket combinations To link a base support to an extension support , 2 bolts are needed, type M6, length 16mm, with 2 M6 washers (1 standard type and 1 Belleville type). 6. TCU POWER SUPPLY CONNECTION Cable must be fastened between 100mm and 200 mm away from its TCU starting point. Verify that no tension stress is applied onto the harness between TCU connector and the fixation point onto the vehicle chassis AND after connection of the harness connector onto the TCU connector. From the TCU connector base to the fixation point away TCU (100 to 200 mm), the harness cable must be in line as much as possible with the TCU connector terminal axis and not curved over 30° see picture on next page below. The connector must be secured after clipping (move the red CPA (Connector Position Assurance) onto the harness connector toward the TCU connector) C3131320010-A1-TCU_Mounting_Specification.odt LDL Technology SAS – Toulouse – France Copyrights 2015 9/ 16 CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Mounting procedure TCU Ref : C3131320010 Version : A1 Cable management in the TCU neighborhood. Incorrect wiring will prevent the system from operating properly. TCU has to be connected to +12V or +24V through 5A fuse protection. TCU must be connected on Ignition (IGN). When TCU and ECU or EBS are connected to a same CAN network, they must share the same ground. LDL Technology can provide the wiring harness (see table below) : Nota : This cable has a minimum curvature radius about 80mm. Reference Description 11 231 0000 Harness CAN (#1-Can) 11 232 0000 Harness (#1) 15 018 0000 Cable TCU CAN 1,2m - Wabco 15 017 0000 Cable TCU CAN 1,2m - EB+ gen3 - Haldex 15 016 0000 Cable TCU CAN Y 1,2m - EB+ gen2 - Haldex 15 015 0000 Cable TCU CAN 1,2m - EB+ gen2 - Haldex 15 014 0000 Cable TCU CAN 1,2m Deutsh 4 contacts 0462-201-16141 - Knorr 15 024 0000 Cable TCU CAN 1,2m – WABCO GIO5 C3131320010-A1-TCU_Mounting_Specification.odt LDL Technology SAS – Toulouse – France Copyrights 2015 10/ 16 CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Mounting procedure TCU UNLOCKED POSITION OF THE CPA Ref : C3131320010 Version : A1 LOCKED POSITION OF THE CPA TCU harness Delphi APEX 150 Clip holder, IP69K 7. TCU LOCATING RECOMMENDATIONS The TCU must be fixed horizontally and upside down (connector side facing the ground): The TCU must be free from any metallic shield in the direction of the connector side. The antenna should be cleared as possible to optimize RF communication and reduce areas of non-receipt. There must be a free area of minimum 5cm wide around the TCU in all directions. TCU must not be exposed to gritting. Each TCU must be at a central point between the wheels that it has to receive, and aligned on the vehicle axis. Distance between TCU and WUS must not exceed 3 meters. When trailer is equipped with an EBS, TCU bracket should be fixed to EBS bracket. C3131320010-A1-TCU_Mounting_Specification.odt LDL Technology SAS – Toulouse – France Copyrights 2015 11/ 16 Mounting procedure TCU CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. TCU Ref : C3131320010 Version : A1 TCU Vehicle axis Truck TCU Trailer TCU MANDATORY TCU location: TCU-one point fixation side In green Vehicle axis C3131320010-A1-TCU_Mounting_Specification.odt LDL Technology SAS – Toulouse – France Copyrights 2015 12/ 16 Mounting procedure TCU 8. FCC/IC REGULATORY NOTICES CONFIDENTIAL INFORMATION 8.1. This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Ref : C3131320010 Version : A1 MODIFICATION STATEMENT: LDL Technology has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment. LDL Technology n’approuve aucune modification apportée à l’appareil par l’utilisateur, quelle qu’en soit la nature. Tout changement ou modification peuvent annuler le droit d’utilisation de l’appareil par l’utilisateur. 8.2. INTERFERENCE STATEMENT: This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. 8.3. RADIATION EXPOSURE STATEMENT: This device complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS ‐102 of the IC radio frequency (RF) Exposure rules. The antenna should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Le présent appareil est conforme à l'exposition aux radiations FCC / IC définies pour un environnement non contrôlé et répond aux directives d'exposition de la fréquence de la FCC radiofréquence (RF) et RSS‐102 de la fréquence radio (RF) IC règles d'exposition. L'antenne doit être installée de façon à garder une distance minimale de 20 centimètres entre la source de rayonnements et votre corps. L'émetteur ne doit pas être colocalisé ni fonctionner conjointement avec une autre antenne ou un autre émetteur. C3131320010-A1-TCU_Mounting_Specification.odt LDL Technology SAS – Toulouse – France Copyrights 2015 13/ 16 Mounting procedure TCU CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. 8.4. Ref : C3131320010 Version : A1 FCC CLASS B DIGITAL DEVICE NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 9. APPENDIX TCU interface dimension, see drawing below C3131320010-A1-TCU_Mounting_Specification.odt LDL Technology SAS – Toulouse – France Copyrights 2015 14/ 16 CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Mounting procedure TCU Ref : C3131320010 Version : A1 Bracket in steel, thickness 2mm, with surface treatment to withstand at least 1500hr NSS C3131320010-A1-TCU_Mounting_Specification.odt LDL Technology SAS – Toulouse – France Copyrights 2015 15/ 16 CONFIDENTIAL INFORMATION Ref : C3131320010 Version : A1 This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Mounting procedure TCU Interface Drawing C3131320010-A1-TCU_Mounting_Specification.odt LDL Technology SAS – Toulouse – France Copyrights 2015 16/ 16
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 16 Language : fr-FR Has XFA : No Title : C3131320010 Author : Thibault BENARD Subject : TCU Mounting Specification Creator : Writer Producer : LibreOffice 4.1 Create Date : 2015:06:18 16:06:13+02:00EXIF Metadata provided by EXIF.tools