LEADER INNOVATIONS 28002 Bluetooth Headphones User Manual TEK163 Instructions

Download:
Mirror Download [FCC.gov]
Document ID	2683654
Application ID	D15oUtYRrZ7DKRdyPEPjVA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	203.8kB (2547503 bits)
Date Submitted	2015-07-17 00:00:00
Date Available	2015-07-18 00:00:00
Creation Date	2015-06-12 16:52:19
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2015-07-17 12:00:57
Document Title	Microsoft Word - TEK163 Instructions.doc
Document Creator	Adobe Illustrator CS5
Document Author:	Administrator

145*180MM
28002
Wireless Over the Ear Headphone
INSTRUCTIONS
Wireless Headphones
Wireless Speaker Phone Option
FM Scan Radio Function
Auxiliary Line-in Play Function
TF Card Reading Function
Mini USB Charging Cable and 3.5mm Line-in Cable
Rechargeable Battery
Product Specifications:
Wireless Version:
V2.1+DR
Operation distance:
30 Feet
2.402
2.480MHz
Range of frequency:
2.4 toto
2.4835
Gigahertz ISM band
Sensitivity:
+85 dB
MP3 PC interface:
USB2.0
Music format:
MP3/WMA
TF card support:
128M-32GB
Rechargeable lithium battery: 350mAh
Stereo headphone with MIC
Speaker:
Sensitivity:
Impedance:
Frequency response:
Rated power:
Power capacity:
Cable length:
Microphone unit:
1.
Please check to make sure the device to which you are pairing has Bluetooth® capabilities. This information should be included in your
phone or music player’s instructions or packaging.
2. Make sure that the headset is turned off.
3. Place the headset and the device in proximity so that both devices are in view.
4. Press the power button to turn on. A blue and red light will alternately flash and the voice prompt will let you know the device is ready to
pair.
5. Check your smartphone or music player’s list of items available for pairing. Select the headphones and complete the pairing.
6. Once paired, the blue light will stay on solid and the voice prompt will let you know the devices are connected.
Note: Some mobile phones or other devices may pair automatically when re-started.
Answer / End / Redial a Call
Features
•
•
•
•
•
•
•
Wireless Pairing
φ40mm
115dB S.P.L at 1KHZ
32Ω
20HZ-20KHZ
40mW
100mW
4.5 Feet
4.5mmx2mm -58dB±3dB
Buttons of Operation (N\A for Auxiliary Line-In mode)
Power: Press and hold for 3 seconds to turn on or off.
I<< / V- Previous\Volume Down: Press and release to go to previous song. Press and hold to decrease volume. In FM Scan Radio mode, search to
the next station. Functions not available in AUX Line in mode.
>II /
Pause\Play\Phone: Press and release to pause/play music. Press and release to answer/end call. Press and hold for 3 seconds twice to
redial the last call.
>>I \ V+ Next\Volume Up: Press and release to go to the next song. Press and hold to increase volume. In FM Scan Radio mode, search to the
next station. Functions not available in AUX Line in mode.
Mode: Press to toggle between Bluetooth®, Aux Input, TF Card, and Scan Radio Functions.
Charging the Headphones
When a call comes in, the ring will be heard through the headset.
1. Press the Pause\Play\Phone button >II /
to answer the call.
2. You may also accept or decline a call using your phone’s functions.
3. To end a call, Press the Pause\Play\Phone button >II /
. You may also end the call using your phone’s functions.
4. Redial the last dial-out number: On standby mode, press and hold the Pause\Play\Phone button >II /
twice.
Auxiliary Line-In Mode (Plugging in a phone or music player)
Plug one end of the provided 3.5mm AUX cable into the smart phone of music player’s headphone or speaker jack and plug the other end into the
TEK163. The headphones will automatically switch to Line-In mode. Operate the song selections and volume from the smart phone or music player.
The mini USB cord may also be used to connect to USB devices for headphone use.
Please Note: Volume, Pause\Play, Next, and Previous song function buttons are not available in AUX Line-in mode. (Use your music player controls.)
FM Scan Radio Mode
1.
2.
3.
4.
Press the mode (M) button until the speaker says “FM Tuner”.
Press and release the pause\play\phone button to cycle through stations. To stop scanning, press one of the seek buttons and then use
them to find the desired station.
Use the next or previous buttons to find a station.
Press and hold next or previous buttons to control volume.
TF Card Mode
Plug the TF Card into the slot and use the Bluetooth® protocols for the button functions.
Precautions
•
•
•
•
•
•
Please only use the computer USB or the DC 5V power adaptor matching the Mini USB interface to charge. Only use quality cords and
adaptors.
Please keep and use in normal environments. Exposure to extreme elements such as extreme heat and cold, fire, excessive moisture,
dust, or other extreme elements may damage the unit. Do not touch with wet hands.
Keep debris or other items from blocking the speakers or from entering any of the ports.
Do not attempt to open, repair, or take apart the headphones. The headphones will be damaged during that process.
If the speaker quality seems lessened, or a popping noise is heard, it may be due to low battery. Please recharge the speaker.
This product is not for children.
TROUBLESHOOTING
No Sound
•
•
•
Make sure that the music player is working and that the headphones are charged.
Make sure the Bluetooth® is paired or the AUX 3.5mm cable is plugged in properly on both ends.
Make sure the TEK163 is in the proper mode. If in FM Scan Radio mode, you may have to press the Next\Previous or Scan button to find a
station.
Plug the mini USB end of the charging cable into the headset and then connect the USB end of the charging cable to the USB port of your PC or
other USB power source. The red LED light will light up during charging. It is strongly recommended that the headphones be fully charged before
first use and after long periods of inactivity.
Not charging
Turn On\Off
FCC Warning Statement
Press and hold the power button for 3 seconds to turn on. To turn off, press and hold the power button for 3 seconds.
Please Note: It is strongly recommended that you turn off the headset and Bluetooth® on the device while not in use.
Check to make sure that you are using the correct cable and that it is fully plugged into both the device and the USB port that you are charging
from. Also check to make sure the PC or other USB charger is turned on.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2015:06:12 16:52:19+08:00
Creator Tool                    : Adobe Illustrator CS5
Modify Date                     : 2015:07:17 12:00:57+08:00
Metadata Date                   : 2015:07:17 12:00:57+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 204
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 20236 bytes, use -b option to extract)
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - TEK163 Instructions.doc
Document ID                     : xmp.did:9AEB0D79DF10E5119AFEB9F6ACD7901B
Instance ID                     : uuid:6db9ee19-c54b-4739-887b-59a16c47eb6e
Original Document ID            : uuid:cbb80c69-77eb-475d-9960-73f2b048cbaa
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:1c2ed957-1042-4868-8c95-69d7560eb545
Derived From Document ID        : uuid:cbb80c69-77eb-475d-9960-73f2b048cbaa
Derived From Original Document ID: uuid:cbb80c69-77eb-475d-9960-73f2b048cbaa
History Action                  : saved
History Instance ID             : xmp.iid:9AEB0D79DF10E5119AFEB9F6ACD7901B
History When                    : 2015:06:12 16:52:20+08:00
History Software Agent          : Adobe Illustrator CS5
History Changed                 : /
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 324.555556
Max Page Size H                 : 268.486627
Max Page Size Unit              : Millimeters
Font Name                       : Calibri-Bold, Arial-BoldMT, Calibri, ArialMT, SymbolMT
Font Family                     : Calibri, Arial, Calibri, Arial, Symbol
Font Face                       : Bold, Bold, Regular, Regular, Regular
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 1.02, Version 3.00, Version 1.02, Version 3.00, Version 1.60
Font Composite                  : False, False, False, False, False
Font File Name                  : CALIBRIB.TTF, ARIALBD.TTF, CALIBRI.TTF, ARIAL.TTF, SYMBOL.TTF
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Page Count                      : 1
For                             : Administrator,
Bounding Box                    : 439 -14 1270 642
Container Version               : 11
Creator Version                 : 15
Author                          : Administrator

EXIF Metadata provided by EXIF.tools