LEIYON INTELLIGENCE TECHNOLOGY LYBX25 Bluetooth Speaker User Manual
GUANGDONG LEIYON INTELLIGENCE TECHNOLOGY CORP. Bluetooth Speaker
user manual
Instruction Manual LIGHT ET-P2532B This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or Modifications not expressly approved by the party responsible could void the user’s authority to operate this device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. “The normal function of the product may be disturbed by strong Electro-Magnetic Interference. If so, simply reset the product to resume normal operation by following the instruction manual. In case the function could not resume, please use the product in other location.” CONTENTS NOTES SAFETY PRECAUTIONS CHARGING INSTRUCTIONS INTRODUCTION USB OPERATION FM OPERATION WIRELESS BT OPERATION WIRELESS BT CONNECTION WORKING TYPLE TROUBLESHOOTING SPECIFICATIONS EN-1 NOTES Do not share the power socket with another appliance. Do not disassemble, do not repair and do not assemble the appliance on your own. If you are not using the appliance, pull the power cord out of the mains socket. Be careful of the power cord and maintain it as appropriate. To ensure safety, do not twist the power cord, do not pull it out of the socket, do not compress it or stretch its length. Do not use the appliance if the supply voltage is lower than 110 V or higher than 240 V. If the supply voltage is lower than 110 V, the appliance may not work and its lifetime may be affected. If the voltage is higher than 240 V, the appliance may catch on fire or cause a fire. Do not wash the appliance or use it in the bathroom, or it may cause potential injuries and other problems. EN-2 1. This appliance must not be used by persons (including children) with physical or mental impairments or by persons with insufficient experience and knowledge, unless they are under supervision or have been instructed about the operation of the appliance by the person responsible for their safety. 2. Children should be under supervision and should not play with the appliance. 3. Do not submerge the power cord, the plug or the appliance in water or other liquids. SAFETY PRECAUTIONS Installation location Leave sufficient space around the appliance of at least 5 cm from any wall/obstacle to ensure proper ventilation and prevent the appliance from overheating. The following places are not suitable installation locations for the appliance: • an unstable location • a location near a heat source or in direct sunlight. • in a wet or dusty environment Warning To prevent suffering an electrical shock or another accident, do not operate the appliance in a rainy or humid environment. Cleaning and maintenance • Use a soft cloth or cotton dipped in a neutral solution for cleaning the surface of appliances. Do not use the type of cloth that you use for washing dishes or aggressive chemical agents. Before moving the appliance • Before moving the appliance to a different location, please take the disc out of the appliance so that the disc and appliance will not be damaged. Storm • If the appliance is not working properly during a storm, please disconnect the plug from the power socket and reinsert it after a minute. Do not drop small items or a liquid into the appliance • In the event that you find small items or a liquid inside the appliance, you see smoke or smell an odour, immediately disconnect the appliance from the power grid. Send the appliance to an authorised service centre. Repacking the appliance • When sending the appliance by a transport company, use the original packaging to prevent its damage during transport. EN-3 CHARGING INSTRUCTIONS This unit able to operates on a built-in Li-ion battery that can be recharged either using from power adaptor. Note: The DC input jack located on back of this unit is mainly designed for operator and charging the built- in Li-ion battery. The unit will still operate normally while charging. CHARGING THE BATTERY Charge the built-in Li-ion battery a minimum of 4 hours prior to first use. After prolonged use, the battery voltage may discharge and operation might become intermittent. When the internal battery charge is very low, the unit will turn off automatically. Battery Note and Care Do not burn or bury batteries. Do not puncture or crush. Do not disassemble. Recycle Li-ion batteries. Do not dispose of in the trash. Use only chargers rated for Li-ion cells. Be sure the charger’s voltage and current settings are correct for the battery pack being charged. Charge batteries on a fireproof surface away from flammable items or liquids. Batteries should NEVER be left unattended while charging. Only adults should charge the batteries. EN-4 INTRODUCTION 5 67 1 2 3 4 LIGHT CHARGE 12 14 13 LOW 9 10 11 15 16 1.Standby 2.Light 3.Source 4.Folder 5.10+ 6.Prew 7.Play/Pause 8.Next 9.Mic jack 10.Charging light 11.Battery Low light 12.AUX 13.USB 14.S.Effect(Echo-/+;Bass-/+;Treble-/+;Volume-/+) 15.Power Switch 16.AC IN EN-5 USB OPERATION USB support music USB stick only. LIGHT Press to switch the light working mode: by pressing it,you could choose to stop the light, or working with one colorful light or with different colorful lights byturn. Press to return to previous track, hold to fast rewind playback Press to temporarily pause a playback. Press it again to resume the playback Press to skip to next track, hold to fast rewind playback Press to jump the track by 10 everytime Press to switch between different modes: WIRELESS BT ,USB,AUX,FM FM OPERATION Press「source」to enter FM Mode. Press to auto scanning for the broadcasting radio channels, and presets all available stations Press to skip to next station, hold to scan for available channel at higher frequency Press to skip to previous station, hold to scan for available channel at lower frequency WIRELESS BT OPERATION Press「source」to enter WIRELESS BT Mode. Press to temporarily pause a playback. Press it again to resume the playback. Press it longer to disconnect ; Press to return to previous track, hold to fast rewind playback Press to skip to next track, hold to fast rewind playback EN-6 WIRELESS BT C onnection The model of the unit is ET-P2532B , press [SOURCE] button to switch to the corresponding signal source ( WIRELESS BT ), use your enabled mobile device to search and pair the the unit by selecting ET-P2532B . The unit will synchronize play songs with your mobile device after connected successfully. Disconnect the WIRELESS BT connection by holding [PLAY/PAUSE] on the front panel or the remote control. NOTE: In WIRELESS BT mode, [PLAY/ PAUSE], [NEXT] and [PREVIOUS] buttons are also active. WIRELESS BT Working Type You could choose to work by connecting with a AC plug by voltage of 110-240V or by the rechargeable battery inside as well. 1. When the battery is with low battery, the low indicator light on the label with flashing to remind you the unit needs to recharge. 2. when under charging, the charge indicator light will display red color and flashing. 3. when charge full, the light will keep on and turn to green color. Battery EN-7 TROUBLESHOOTING In the event of problems with the system and before taking it to an authorised service centre, please check the following: Malfunction No power supply Failure Inspection and action • please check that the power cord is inserted into a working power socket • please check that the system is turned on • Please make sure the rechargeable battery is full charge enough to support work when disconnect with AC plug • press and hold the stand-by mode button (Stand by) for 5 seconds. The system will turns itself off • Make sure the formats in the USB/SD card are MP3/WMA format Playback of USB/SD, • Make sure the downloaded file is complete and without loss. no sound or hissing SPECIFICATIONS Input voltage AC 1 1 0 - 240 V, 50/60 Hz, Output power RMS 25W (Speaker:6.5’’+2’’x2,4 Ω , 10 %THD) Consumption Power 32W EN-8
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Format : application/pdf Title : PI1610B094 MBX25 黑白说明书 A6 70G书纸 9PCS Metadata Date : 2017:09:30 14:22:59+08:00 Modify Date : 2017:09:30 14:22:59+08:00 Create Date : 2016:11:14 19:19:09+09:00 Creator Tool : Adobe Illustrator CS6 (Windows) Thumbnail Width : 184 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 15715 bytes, use -b option to extract) Instance ID : uuid:9e0534bb-8940-4a0c-8059-9ba83dcf9bdc Document ID : xmp.did:F409C2B53AAAE61182E28D7ABBEFDAD2 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:9ad7fb0b-932b-4aa1-8a1d-12d6e9721ef5 Derived From Document ID : xmp.did:24239C9550A2E6118122B16706EFB18D Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:659E5289ACA1E611A756C591E9CBA02A, xmp.iid:F409C2B53AAAE61182E28D7ABBEFDAD2 History When : 2016:11:03 19:48:50+08:00, 2016:11:14 19:18:57+08:00 History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows) History Changed : /, / Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : False N Pages : 1 Max Page Size W : 104.999965 Max Page Size H : 148.000096 Max Page Size Unit : Millimeters Font Name : Arial-BoldMT, ArialMT, AdobeSongStd-Light Font Family : Arial MT, Arial, Adobe 宋体 Std Font Face : Bold, Regular, L Font Type : Open Type, Open Type, Open Type Font Version : 001.001, Version 5.10, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168 Font Composite : False, False, False Font File Name : Arial-BoldMT_2.otf, arial.ttf, AdobeSongStd-Light.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : 默认色板组 Swatch Groups Group Type : 0 Swatch Groups Colorants Swatch Name: PANTONE 3005 C Swatch Groups Colorants Type : SPOT Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants Mode : LAB Swatch Groups Colorants L : 43.921600 Swatch Groups Colorants A : -21 Swatch Groups Colorants B : -58 Producer : Adobe PDF library 10.01 Has XFA : No Page Count : 10 Creator : Adobe Illustrator CS6 (Windows)EXIF Metadata provided by EXIF.tools